Adds support for fractional seconds

* Rebases WhymustIhaveaname:master to arduino-libraries:master.
* Fixes issues with Spell Check action.
* Fixes HiRes example compilation.
* Refactors HiRes example to be more idiomatic as compared to the
  existing examples.
* Fixes several line ending and white space inconsistencies.

NTPClient.cpp

@@ -82,15 +82,19 @@ void NTPClient::begin(unsigned int port) {
 }
 
 bool NTPClient::forceUpdate() {
+  #ifdef DEBUG_NTPClient
+    Serial.println("Update from NTP Server");
+  #endif
+
   // flush any existing packets
   while(this->_udp->parsePacket() != 0)
     this->_udp->flush();
 
-  uint32_t tik,tok; //tik,tok to record wait time, replace timeout
+  uint32_t tik,tok; //tik,tok to record wait time
   this->sendNTPPacket();
   tik=millis();
   #ifdef DEBUG_NTPClient
-    Serial.println("sent ntp packet");
+    Serial.println("Sent ntp packet");
   #endif
 
   // Wait till data is there or timeout...

NTPClient.h

@@ -62,7 +62,7 @@ class NTPClient {
     void setPoolServerIP(IPAddress server_ip);
 
     /**
-     * Set ntp timeout, recommand not above 1000ms
+     * Set ntp timeout (recommendation < 1000ms)
      *
      * @param t_ms
      */

examples/HiRes/HiRes.ino

@@ -0,0 +1,75 @@
+#include <NTPClient.h>
+// change next line to use with another board/shield
+#include <ESP8266WiFi.h>
+//#include <WiFi.h>
+//#include <WiFi101.h>
+#include <WiFiUdp.h>
+
+const char *ssid     = "<SSID>";
+const char *password = "<PASSWORD>";
+
+WiFiUDP ntpUDP;
+
+// You can specify the time server pool and the offset (in seconds, can be
+// changed later with setTimeOffset() ). Additionally you can specify the
+// update interval (in milliseconds, can be changed using setUpdateInterval() ).
+NTPClient my_time_client(ntpUDP, "europe.pool.ntp.org", 28800, 20000);
+
+inline void sync_time(){
+    my_time_client.begin();
+    //smaller timeout will give you more accuracy
+    //but also larger possibility to fail
+    my_time_client.setTimeout(800);
+    Serial.println("syncing...");
+
+    while(my_time_client.update()!=1){
+        delay(2000);
+        my_time_client.forceUpdate();
+    }
+
+    Serial.print("success: ");
+    Serial.println(my_time_client.getFormattedTime());
+}
+
+void setup(){
+  Serial.begin(115200);
+
+  WiFi.begin(ssid, password);
+  while ( WiFi.status() != WL_CONNECTED ) {
+    delay ( 500 );
+    Serial.print ( "." );
+  }
+
+  sync_time();
+}
+
+String s_last_time="s_last_time";
+
+void loop(){
+    String s_time=my_time_client.getFormattedTime();
+    if(s_time!=s_last_time){
+        Serial.print("a second passed ");
+        Serial.print(s_time);Serial.print(" ");
+        Serial.print(my_time_client.get_millis(),3);
+        Serial.println("ms");
+        s_last_time=s_time;
+
+        //please do not update too frequently
+        int8_t re=my_time_client.update();
+        if(re==0){
+            Serial.println("0: sync but failed");
+            delay(500);
+        }else if(re==1){
+            Serial.println("1: sync and suc");
+        }else if(re==2){
+            ;//Serial.println("2: not time to sync");
+        }else if(re==3){
+            Serial.println("3: last failed was just happen");
+        }else{
+            Serial.print("return value error: ");
+            Serial.println(re);
+        }
+    }
+
+    delay(1);
+}

examples/ntp_demo.ino

@@ -1,94 +0,0 @@
-// change next line to use with another board/shield
-#include <WiFi.h>
-//#include <ESP8266WiFi.h>
-//#include <WiFi.h>
-//#include <WiFi101.h>
-#include <WiFiUdp.h>
-#include "NTPClient.h"
-
-WiFiUDP ntpUDP;
-NTPClient my_time_client(ntpUDP);
-
-void connect_wifi(char * ssid,char * password){
-    Serial.print("wifi connecting...");
-    WiFi.begin(ssid,password);
-    while(WiFi.status()!= WL_CONNECTED){
-        delay(1000);
-        Serial.print(".");
-    }
-    
-    Serial.println("\nwifi connected!");
-    Serial.print("ip: ");
-    Serial.println(WiFi.localIP());
-    Serial.print("netmask: ");
-    Serial.println(WiFi.subnetMask());
-    Serial.print("gateway: ");
-    Serial.println(WiFi.gatewayIP());
-    Serial.print("channel: ");
-    Serial.println(WiFi.channel());
-    Serial.print("auto-reconnect: ");
-    Serial.println(WiFi.getAutoReconnect());
-}
-
-inline void sync_time(){
-    my_time_client.begin();
-    my_time_client.setTimeOffset(28800);
-    my_time_client.setUpdateInterval(20000);
-    //my_time_client.setPoolServerName("0.ubuntu.pool.ntp.org");
-    my_time_client.setPoolServerName("192.168.1.200");
-    //smaller timeout will give you more accuracy 
-    //but also larger possibility to fail 
-    my_time_client.setTimeout(800); 
-    Serial.println("syncing...");
-
-    while(my_time_client.update()!=1){
-        delay(2000);
-        my_time_client.forceUpdate();
-    }
-
-    Serial.print("success: ");
-    Serial.println(my_time_client.getFormattedTime());
-}
-
-void setup(){
-    Serial.begin(230400);
-    Serial.println("serial inited");
-
-    connect_wifi((char *)"ssid",(char *)"pwd");
-    sync_time();
-
-    Serial.println("ready!");
-}
-
-String s_last_time="s_last_time";
-
-void loop(){
-    String s_time=my_time_client.getFormattedTime();
-    if(s_time!=s_last_time){
-        Serial.print("a second passed ");
-        Serial.print(s_time);Serial.print(" ");
-        Serial.print(my_time_client.get_millis(),3);
-        Serial.println("ms");
-        s_last_time=s_time;
-
-        //please do not update too frequently
-        int8_t re=my_time_client.update();
-        if(re==0){
-            Serial.println("0: sync but failed");
-            delay(500);
-        }else if(re==1){
-            Serial.println("1: sync and suc");
-        }else if(re==2){
-            ;//Serial.println("2: not time to sync");
-        }else if(re==3){
-            Serial.println("3: last failed was just happen");
-        }else{
-            Serial.print("return value error: ");
-            Serial.println(re);
-        }
-    }
-
-    //float ms=my_time_client.get_millis();
-    
-    delay(1);
-}