WLED/wled00/wled00.ino

620 lines
22 KiB
Arduino
Raw Normal View History

/*
Main sketch, global variable declarations
*/
/*
* @title WLED project sketch
2020-02-09 10:35:32 +01:00
* @version 0.9.1
* @author Christian Schwinne
*/
2019-05-21 18:50:56 +02:00
//ESP8266-01 (blue) got too little storage space to work with all features of WLED. To use it, you must use ESP8266 Arduino Core v2.4.2 and the setting 512K(No SPIFFS).
//ESP8266-01 (black) has 1MB flash and can thus fit the whole program. Use 1M(64K SPIFFS).
//Uncomment some of the following lines to disable features to compile for ESP8266-01 (max flash size 434kB):
//You are required to disable over-the-air updates:
//#define WLED_DISABLE_OTA //saves 14kb
2019-11-28 20:13:52 +01:00
//You need to choose some of these features to disable:
//#define WLED_DISABLE_ALEXA //saves 11kb
//#define WLED_DISABLE_BLYNK //saves 6kb
//#define WLED_DISABLE_CRONIXIE //saves 3kb
//#define WLED_DISABLE_HUESYNC //saves 4kb
2020-02-24 12:44:41 +01:00
//#define WLED_DISABLE_INFRARED //there is no pin left for this on ESP8266-01, saves 12kb
#define WLED_ENABLE_MQTT //saves 12kb
#define WLED_ENABLE_ADALIGHT //saves 500b only
//#define WLED_ENABLE_DMX //uses 3.5kb, if wanting to use DMX together with LEDs, you should change the LEDPIN to something other than 2 in NpbWrapper.h
2019-03-16 02:09:37 +01:00
#define WLED_DISABLE_FILESYSTEM //SPIFFS is not used by any WLED feature yet
//#define WLED_ENABLE_FS_SERVING //Enable sending html file from SPIFFS before serving progmem version
//#define WLED_ENABLE_FS_EDITOR //enable /edit page for editing SPIFFS content. Will also be disabled with OTA lock
//to toggle usb serial debug (un)comment the following line
2019-10-26 00:00:44 +02:00
//#define WLED_DEBUG
//library inclusions
2016-09-11 23:07:18 +02:00
#include <Arduino.h>
#ifdef WLED_ENABLE_DMX
#include <ESPDMX.h>
DMXESPSerial dmx;
#endif
2019-10-25 15:32:09 +02:00
#ifdef ESP8266
#include <ESP8266WiFi.h>
#include <ESP8266mDNS.h>
#include <ESPAsyncTCP.h>
extern "C" {
#include <user_interface.h>
}
#else //ESP32
#include <WiFi.h>
#include "esp_wifi.h"
#include <ESPmDNS.h>
#include <AsyncTCP.h>
#include "SPIFFS.h"
#endif
#include <ESPAsyncWebServer.h>
2016-09-11 23:07:18 +02:00
#include <EEPROM.h>
#include <WiFiUdp.h>
2019-02-16 00:21:22 +01:00
#include <DNSServer.h>
#ifndef WLED_DISABLE_OTA
#include <ArduinoOTA.h>
#endif
2019-03-16 02:09:37 +01:00
#include <SPIFFSEditor.h>
#include "src/dependencies/time/TimeLib.h"
#include "src/dependencies/timezone/Timezone.h"
2019-01-09 22:52:42 +01:00
#ifndef WLED_DISABLE_ALEXA
#define ESPALEXA_ASYNC
#define ESPALEXA_NO_SUBPAGE
#define ESPALEXA_MAXDEVICES 1
// #define ESPALEXA_DEBUG
#include "src/dependencies/espalexa/Espalexa.h"
2019-01-09 22:52:42 +01:00
#endif
#ifndef WLED_DISABLE_BLYNK
#include "src/dependencies/blynk/BlynkSimpleEsp.h"
#endif
2019-11-18 20:43:27 +01:00
#include "src/dependencies/e131/ESPAsyncE131.h"
#include "src/dependencies/async-mqtt-client/AsyncMqttClient.h"
#include "src/dependencies/json/AsyncJson-v6.h"
#include "src/dependencies/json/ArduinoJson-v6.h"
2019-12-02 12:41:35 +01:00
#include "html_ui.h"
#include "html_settings.h"
#include "html_other.h"
2019-10-07 23:38:21 +02:00
#include "FX.h"
2018-11-18 00:31:45 +01:00
#include "ir_codes.h"
2020-02-19 15:53:42 +01:00
#include "const.h"
2016-09-11 23:07:18 +02:00
2020-02-24 18:48:21 +01:00
#ifndef CLIENT_SSID
#define CLIENT_SSID DEFAULT_CLIENT_SSID
#endif
#ifndef CLIENT_PASS
#define CLIENT_PASS ""
#endif
2019-03-16 02:09:37 +01:00
#if IR_PIN < 0
#ifndef WLED_DISABLE_INFRARED
#define WLED_DISABLE_INFRARED
#endif
#endif
#ifndef WLED_DISABLE_INFRARED
#include <IRremoteESP8266.h>
#include <IRrecv.h>
#include <IRutils.h>
#endif
// remove flicker because PWM signal of RGB channels can become out of phase
#if defined(WLED_USE_ANALOG_LEDS) && defined(ESP8266)
#include "src/dependencies/arduino/core_esp8266_waveform.h"
#endif
// enable additional debug output
#ifdef WLED_DEBUG
#ifndef ESP8266
#include <rom/rtc.h>
#endif
#endif
//version code in format yymmddb (b = daily build)
#define VERSION 2003262
2020-01-14 11:12:33 +01:00
2020-02-09 10:35:32 +01:00
char versionString[] = "0.9.1";
2017-03-20 19:56:07 +01:00
//AP and OTA default passwords (for maximum change them!)
2020-02-24 18:48:21 +01:00
char apPass[65] = DEFAULT_AP_PASS;
char otaPass[33] = DEFAULT_OTA_PASS;
//Hardware CONFIG (only changeble HERE, not at runtime)
2018-11-18 00:31:45 +01:00
//LED strip pin, button pin and IR pin changeable in NpbWrapper.h!
byte auxDefaultState = 0; //0: input 1: high 2: low
byte auxTriggeredState = 0; //0: input 1: high 2: low
char ntpServerName[33] = "0.wled.pool.ntp.org";//NTP server to use
//WiFi CONFIG (all these can be changed via web UI, no need to set them here)
2020-02-24 18:48:21 +01:00
char clientSSID[33] = CLIENT_SSID;
char clientPass[65] = CLIENT_PASS;
2019-02-05 19:40:24 +01:00
char cmDNS[33] = "x"; //mDNS address (placeholder, will be replaced by wledXXXXXXXXXXXX.local)
char apSSID[33] = ""; //AP off by default (unless setup)
byte apChannel = 1; //2.4GHz WiFi AP channel (1-13)
byte apHide = 0; //hidden AP SSID
2020-02-19 15:53:42 +01:00
byte apBehavior = AP_BEHAVIOR_BOOT_NO_CONN; //access point opens when no connection after boot by default
IPAddress staticIP(0, 0, 0, 0); //static IP of ESP
IPAddress staticGateway(0, 0, 0, 0); //gateway (router) IP
IPAddress staticSubnet(255, 255, 255, 0); //most common subnet in home networks
bool noWifiSleep = false; //disabling modem sleep modes will increase heat output and power usage, but may help with connection issues
//LED CONFIG
2019-08-17 12:27:06 +02:00
uint16_t ledCount = 30; //overcurrent prevented by ABL
bool useRGBW = false; //SK6812 strips can contain an extra White channel
2019-08-17 12:27:06 +02:00
#define ABL_MILLIAMPS_DEFAULT 850; //auto lower brightness to stay close to milliampere limit
bool turnOnAtBoot = true; //turn on LEDs at power-up
byte bootPreset = 0; //save preset to load after power-up
2020-02-24 17:27:59 +01:00
byte col[] {255, 160, 0, 0}; //current RGB(W) primary color. col[] should be updated if you want to change the color.
byte colSec[] {0, 0, 0, 0}; //current RGB(W) secondary color
byte briS = 128; //default brightness
byte nightlightTargetBri = 0; //brightness after nightlight is over
byte nightlightDelayMins = 60;
bool nightlightFade = true; //if enabled, light will gradually dim towards the target bri. Otherwise, it will instantly set after delay over
bool nightlightColorFade = false; //if enabled, light will gradually fade color from primary to secondary color.
bool fadeTransition = true; //enable crossfading color transition
2019-05-22 00:23:09 +02:00
uint16_t transitionDelay = 750; //default crossfade duration in ms
bool skipFirstLed = false; //ignore first LED in strip (useful if you need the LED as signal repeater)
byte briMultiplier = 100; //% of brightness to set (to limit power, if you set it to 50 and set bri to 255, actual brightness will be 127)
//User Interface CONFIG
2019-10-05 01:56:55 +02:00
char serverDescription[33] = "WLED"; //Name of module
bool syncToggleReceive = false; //UIs which only have a single button for sync should toggle send+receive if this is true, only send otherwise
//Sync CONFIG
bool buttonEnabled = true;
byte irEnabled = 0; //Infrared receiver
uint16_t udpPort = 21324; //WLED notifier default port
uint16_t udpRgbPort = 19446; //Hyperion port
bool receiveNotificationBrightness = true; //apply brightness from incoming notifications
bool receiveNotificationColor = true; //apply color
bool receiveNotificationEffects = true; //apply effects setup
bool notifyDirect = false; //send notification if change via UI or HTTP API
bool notifyButton = false; //send if updated by button or infrared remote
bool notifyAlexa = false; //send notification if updated via Alexa
bool notifyMacro = false; //send notification for macro
bool notifyHue = true; //send notification if Hue light changes
bool notifyTwice = false; //notifications use UDP: enable if devices don't sync reliably
bool alexaEnabled = true; //enable device discovery by Amazon Echo
char alexaInvocationName[33] = "Light"; //speech control name of device. Choose something voice-to-text can understand
2019-02-16 00:21:22 +01:00
char blynkApiKey[36] = ""; //Auth token for Blynk server. If empty, no connection will be made
uint16_t realtimeTimeoutMs = 2500; //ms timeout of realtime mode before returning to normal mode
int arlsOffset = 0; //realtime LED offset
bool receiveDirect = true; //receive UDP realtime
bool arlsDisableGammaCorrection = true; //activate if gamma correction is handled by the source
bool arlsForceMaxBri = false; //enable to force max brightness if source has very dark colors that would be black
#define E131_MAX_UNIVERSE_COUNT 9
uint16_t e131Universe = 1; //settings for E1.31 (sACN) protocol (only DMX_MODE_MULTIPLE_* can span over consequtive universes)
2020-02-19 15:53:42 +01:00
uint8_t DMXMode = DMX_MODE_MULTIPLE_RGB; //DMX mode (s.a.)
uint16_t DMXAddress = 1; //DMX start address of fixture, a.k.a. first Channel [for E1.31 (sACN) protocol]
uint8_t DMXOldDimmer = 0; //only update brightness on change
uint8_t e131LastSequenceNumber[E131_MAX_UNIVERSE_COUNT]; //to detect packet loss
bool e131Multicast = false; //multicast or unicast
bool e131SkipOutOfSequence = false; //freeze instead of flickering
bool mqttEnabled = false;
char mqttDeviceTopic[33] = ""; //main MQTT topic (individual per device, default is wled/mac)
char mqttGroupTopic[33] = "wled/all"; //second MQTT topic (for example to group devices)
char mqttServer[33] = ""; //both domains and IPs should work (no SSL)
char mqttUser[41] = ""; //optional: username for MQTT auth
char mqttPass[41] = ""; //optional: password for MQTT auth
char mqttClientID[41] = ""; //override the client ID
uint16_t mqttPort = 1883;
bool huePollingEnabled = false; //poll hue bridge for light state
uint16_t huePollIntervalMs = 2500; //low values (< 1sec) may cause lag but offer quicker response
char hueApiKey[47] = "api"; //key token will be obtained from bridge
byte huePollLightId = 1; //ID of hue lamp to sync to. Find the ID in the hue app ("about" section)
IPAddress hueIP = (0, 0, 0, 0); //IP address of the bridge
bool hueApplyOnOff = true;
bool hueApplyBri = true;
bool hueApplyColor = true;
//Time CONFIG
bool ntpEnabled = false; //get internet time. Only required if you use clock overlays or time-activated macros
bool useAMPM = false; //12h/24h clock format
byte currentTimezone = 0; //Timezone ID. Refer to timezones array in wled10_ntp.ino
int utcOffsetSecs = 0; //Seconds to offset from UTC before timzone calculation
byte overlayDefault = 0; //0: no overlay 1: analog clock 2: single-digit clocl 3: cronixie
byte overlayMin = 0, overlayMax = ledCount - 1; //boundaries of overlay mode
byte analogClock12pixel = 0; //The pixel in your strip where "midnight" would be
bool analogClockSecondsTrail = false; //Display seconds as trail of LEDs instead of a single pixel
bool analogClock5MinuteMarks = false; //Light pixels at every 5-minute position
char cronixieDisplay[7] = "HHMMSS"; //Cronixie Display mask. See wled13_cronixie.ino
bool cronixieBacklight = true; //Allow digits to be back-illuminated
bool countdownMode = false; //Clock will count down towards date
byte countdownYear = 20, countdownMonth = 1; //Countdown target date, year is last two digits
byte countdownDay = 1, countdownHour = 0;
byte countdownMin = 0, countdownSec = 0;
byte macroBoot = 0; //macro loaded after startup
byte macroNl = 0; //after nightlight delay over
2019-08-17 12:27:06 +02:00
byte macroCountdown = 0;
byte macroAlexaOn = 0, macroAlexaOff = 0;
byte macroButton = 0, macroLongPress = 0, macroDoublePress = 0;
2017-02-21 23:59:47 +01:00
//Security CONFIG
bool otaLock = false; //prevents OTA firmware updates without password. ALWAYS enable if system exposed to any public networks
bool wifiLock = false; //prevents access to WiFi settings when OTA lock is enabled
bool aOtaEnabled = true; //ArduinoOTA allows easy updates directly from the IDE. Careful, it does not auto-disable when OTA lock is on
2018-04-24 12:03:25 +02:00
uint16_t userVar0 = 0, userVar1 = 0;
2020-02-24 12:54:23 +01:00
#ifdef WLED_ENABLE_DMX
//dmx CONFIG
byte DMXChannels = 7; // number of channels per fixture
byte DMXFixtureMap[15] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
// assigns the different channels to different functions. See wled21_dmx.ino for more information.
uint16_t DMXGap = 10; // gap between the fixtures. makes addressing easier because you don't have to memorize odd numbers when climbing up onto a rig.
uint16_t DMXStart = 10; // start address of the first fixture
uint16_t DMXSegment = 0; // segment which DMX fixtures use
uint16_t DMXStartLED = 0; // start LED from which DMX fixtures should start
2020-02-24 12:54:23 +01:00
#endif
//internal global variable declarations
//wifi
bool apActive = false;
bool forceReconnect = false;
uint32_t lastReconnectAttempt = 0;
bool interfacesInited = false;
2019-10-26 00:00:44 +02:00
bool wasConnected = false;
//color
byte colOld[] {0, 0, 0, 0}; //color before transition
2020-02-24 17:27:59 +01:00
byte colT[] {0, 0, 0, 0}; //color that is currently displayed on the LEDs
byte colIT[] {0, 0, 0, 0}; //color that was last sent to LEDs
byte colSecT[] {0, 0, 0, 0};
byte colSecOld[] {0, 0, 0, 0};
byte colSecIT[] {0, 0, 0, 0};
byte lastRandomIndex = 0; //used to save last random color so the new one is not the same
//transitions
bool transitionActive = false;
uint16_t transitionDelayDefault = transitionDelay;
uint16_t transitionDelayTemp = transitionDelay;
2017-02-07 16:02:27 +01:00
unsigned long transitionStartTime;
float tperLast = 0; //crossfade transition progress, 0.0f - 1.0f
bool jsonTransitionOnce = false;
//nightlight
bool nightlightActive = false;
bool nightlightActiveOld = false;
uint32_t nightlightDelayMs = 10;
uint8_t nightlightDelayMinsDefault = nightlightDelayMins;
2017-02-07 16:02:27 +01:00
unsigned long nightlightStartTime;
byte briNlT = 0; //current nightlight brightness
byte colNlT[] {0, 0, 0, 0}; //current nightlight color
//brightness
unsigned long lastOnTime = 0;
bool offMode = !turnOnAtBoot;
byte bri = briS;
byte briOld = 0;
byte briT = 0;
byte briIT = 0;
byte briLast = 128; //brightness before turned off. Used for toggle function
byte whiteLast = 128; //white channel before turned off. Used for toggle function
//button
bool buttonPressedBefore = false;
2019-10-18 12:19:52 +02:00
bool buttonLongPressed = false;
unsigned long buttonPressedTime = 0;
unsigned long buttonWaitTime = 0;
//notifications
bool notifyDirectDefault = notifyDirect;
bool receiveNotifications = true;
unsigned long notificationSentTime = 0;
2020-02-22 16:17:32 +01:00
byte notificationSentCallMode = NOTIFIER_CALL_MODE_INIT;
bool notificationTwoRequired = false;
//effects
byte effectCurrent = 0;
byte effectSpeed = 128;
byte effectIntensity = 128;
byte effectPalette = 0;
//network
bool udpConnected = false, udpRgbConnected = false;
//ui style
bool showWelcomePage = false;
2017-02-07 14:24:42 +01:00
//hue
byte hueError = HUE_ERROR_INACTIVE;
2019-02-18 22:34:21 +01:00
//uint16_t hueFailCount = 0;
float hueXLast = 0, hueYLast = 0;
uint16_t hueHueLast = 0, hueCtLast = 0;
byte hueSatLast = 0, hueBriLast = 0;
unsigned long hueLastRequestSent = 0;
2019-02-18 22:34:21 +01:00
bool hueAuthRequired = false;
bool hueReceived = false;
bool hueStoreAllowed = false, hueNewKey = false;
//overlays
byte overlayCurrent = overlayDefault;
byte overlaySpeed = 200;
unsigned long overlayRefreshMs = 200;
2017-02-07 16:02:27 +01:00
unsigned long overlayRefreshedTime;
//cronixie
byte dP[] {0, 0, 0, 0, 0, 0};
bool cronixieInit = false;
//countdown
unsigned long countdownTime = 1514764800L;
bool countdownOverTriggered = true;
//timer
byte lastTimerMinute = 0;
byte timerHours[] = {0, 0, 0, 0, 0, 0, 0, 0};
byte timerMinutes[] = {0, 0, 0, 0, 0, 0, 0, 0};
byte timerMacro[] = {0, 0, 0, 0, 0, 0, 0, 0};
byte timerWeekday[] = {255, 255, 255, 255, 255, 255, 255, 255}; //weekdays to activate on
2019-01-31 00:09:44 +01:00
//bit pattern of arr elem: 0b11111111: sun,sat,fri,thu,wed,tue,mon,validity
//blynk
bool blynkEnabled = false;
//preset cycling
bool presetCyclingEnabled = false;
byte presetCycleMin = 1, presetCycleMax = 5;
uint16_t presetCycleTime = 1250;
unsigned long presetCycledTime = 0; byte presetCycCurr = presetCycleMin;
bool presetApplyBri = true;
bool saveCurrPresetCycConf = false;
//realtime
2020-02-19 15:53:42 +01:00
byte realtimeMode = REALTIME_MODE_INACTIVE;
IPAddress realtimeIP = (0,0,0,0);
unsigned long realtimeTimeout = 0;
//mqtt
2019-10-18 14:06:07 +02:00
long lastMqttReconnectAttempt = 0;
long lastInterfaceUpdate = 0;
2020-02-22 16:17:32 +01:00
byte interfaceUpdateCallMode = NOTIFIER_CALL_MODE_INIT;
2019-11-10 22:13:07 +01:00
char mqttStatusTopic[40] = ""; //this must be global because of async handlers
2019-02-25 19:14:13 +01:00
#if AUXPIN >= 0
//auxiliary debug pin
byte auxTime = 0;
unsigned long auxStartTime = 0;
bool auxActive = false, auxActiveBefore = false;
2019-02-25 19:14:13 +01:00
#endif
2018-02-20 22:29:48 +01:00
//alexa udp
String escapedMac;
2019-01-09 22:52:42 +01:00
#ifndef WLED_DISABLE_ALEXA
Espalexa espalexa;
EspalexaDevice* espalexaDevice;
2019-01-09 22:52:42 +01:00
#endif
2017-02-21 23:59:47 +01:00
//dns server
DNSServer dnsServer;
//network time
bool ntpConnected = false;
time_t local = 0;
unsigned long ntpLastSyncTime = 999000000L;
unsigned long ntpPacketSentTime = 999000000L;
IPAddress ntpServerIP;
uint16_t ntpLocalPort = 2390;
#define NTP_PACKET_SIZE 48
2020-02-25 02:25:17 +01:00
//maximum number of LEDs - MAX_LEDS is coming from the JSON response getting too big, MAX_LEDS_DMA will become a timing issue
2019-10-26 00:00:44 +02:00
#define MAX_LEDS 1500
#define MAX_LEDS_DMA 500
2019-03-11 19:30:49 +01:00
//string temp buffer (now stored in stack locally)
#define OMAX 2048
2019-03-11 19:30:49 +01:00
char* obuf;
uint16_t olen = 0;
//presets
uint16_t savedPresets = 0;
2019-12-01 01:42:52 +01:00
int8_t currentPreset = -1;
bool isPreset = false;
byte errorFlag = 0;
2019-02-16 00:21:22 +01:00
String messageHead, messageSub;
byte optionType;
2019-02-16 00:21:22 +01:00
bool doReboot = false; //flag to initiate reboot from async handlers
2019-10-20 17:38:25 +02:00
bool doPublishMqtt = false;
//server library objects
2019-02-16 00:21:22 +01:00
AsyncWebServer server(80);
2019-02-18 22:34:21 +01:00
AsyncClient* hueClient = NULL;
AsyncMqttClient* mqtt = NULL;
2019-11-18 20:43:27 +01:00
//function prototypes
void colorFromUint32(uint32_t, bool = false);
void serveMessage(AsyncWebServerRequest*, uint16_t, String, String, byte);
2019-11-18 20:43:27 +01:00
void handleE131Packet(e131_packet_t*, IPAddress);
2020-02-09 19:10:29 +01:00
void arlsLock(uint32_t,byte);
2020-01-02 22:10:59 +01:00
void handleOverlayDraw();
2019-11-18 20:43:27 +01:00
//udp interface objects
WiFiUDP notifierUdp, rgbUdp;
2017-02-07 16:02:27 +01:00
WiFiUDP ntpUdp;
2019-11-18 20:43:27 +01:00
ESPAsyncE131 e131(handleE131Packet);
bool e131NewData = false;
2016-09-21 23:23:18 +02:00
//led fx library object
WS2812FX strip = WS2812FX();
2019-10-18 13:26:39 +02:00
#define WLED_CONNECTED (WiFi.status() == WL_CONNECTED)
2020-02-24 18:48:21 +01:00
#define WLED_WIFI_CONFIGURED (strlen(clientSSID) >= 1 && strcmp(clientSSID,DEFAULT_CLIENT_SSID) != 0)
2019-10-18 13:26:39 +02:00
//debug macros
#ifdef WLED_DEBUG
#define DEBUG_PRINT(x) Serial.print (x)
#define DEBUG_PRINTLN(x) Serial.println (x)
#define DEBUG_PRINTF(x) Serial.printf (x)
unsigned long debugTime = 0;
int lastWifiState = 3;
unsigned long wifiStateChangedTime = 0;
int loops = 0;
#else
#define DEBUG_PRINT(x)
#define DEBUG_PRINTLN(x)
#define DEBUG_PRINTF(x)
#endif
//filesystem
2019-03-16 02:09:37 +01:00
#ifndef WLED_DISABLE_FILESYSTEM
#include <FS.h>
#ifdef ARDUINO_ARCH_ESP32
#include "SPIFFS.h"
#endif
#include "SPIFFSEditor.h"
2017-05-15 12:24:59 +02:00
#endif
2016-09-11 23:07:18 +02:00
//turns all LEDs off and restarts ESP
2016-09-11 23:07:18 +02:00
void reset()
{
briT = 0;
2019-03-07 23:22:52 +01:00
long dly = millis();
while (millis() - dly < 250)
2019-03-07 23:22:52 +01:00
{
yield(); //enough time to send response to client
}
setAllLeds();
DEBUG_PRINTLN("MODULE RESET");
ESP.restart();
2016-09-11 23:07:18 +02:00
}
//append new c string to temp buffer efficiently
bool oappend(const char* txt)
{
uint16_t len = strlen(txt);
if (olen + len >= OMAX) return false; //buffer full
strcpy(obuf + olen, txt);
olen += len;
return true;
}
//append new number to temp buffer efficiently
bool oappendi(int i)
{
2019-08-17 12:27:06 +02:00
char s[11];
sprintf(s, "%ld", i);
return oappend(s);
}
//boot starts here
2016-09-11 23:07:18 +02:00
void setup() {
wledInit();
2016-09-11 23:07:18 +02:00
}
//main program loop
2016-09-11 23:07:18 +02:00
void loop() {
handleIR(); //2nd call to function needed for ESP32 to return valid results -- should be good for ESP8266, too
2019-10-18 13:26:39 +02:00
handleConnection();
handleSerial();
handleNotifications();
handleTransitions();
#ifdef WLED_ENABLE_DMX
handleDMX();
#endif
userLoop();
2019-08-17 12:27:06 +02:00
yield();
2019-03-16 02:09:37 +01:00
handleIO();
2018-11-18 00:31:45 +01:00
handleIR();
handleNetworkTime();
2019-10-18 14:06:07 +02:00
handleAlexa();
2019-08-17 12:27:06 +02:00
handleOverlays();
yield();
#ifdef WLED_USE_ANALOG_LEDS
strip.setRgbwPwm();
#endif
if (doReboot) reset();
2019-08-17 12:27:06 +02:00
2020-02-09 19:10:29 +01:00
if (!realtimeMode) //block stuff if WARLS/Adalight is enabled
{
if (apActive) dnsServer.processNextRequest();
#ifndef WLED_DISABLE_OTA
2019-10-20 17:38:25 +02:00
if (WLED_CONNECTED && aOtaEnabled) ArduinoOTA.handle();
#endif
handleNightlight();
2019-03-09 21:41:23 +01:00
yield();
2019-10-18 14:06:07 +02:00
handleHue();
handleBlynk();
yield();
if (!offMode) strip.service();
}
yield();
#ifdef ESP8266
2020-01-27 00:45:30 +01:00
MDNS.update();
#endif
if (millis() - lastMqttReconnectAttempt > 30000) initMqtt();
2019-08-17 12:27:06 +02:00
//DEBUG serial logging
#ifdef WLED_DEBUG
if (millis() - debugTime > 9999)
{
DEBUG_PRINTLN("---DEBUG INFO---");
DEBUG_PRINT("Runtime: "); DEBUG_PRINTLN(millis());
DEBUG_PRINT("Unix time: "); DEBUG_PRINTLN(now());
DEBUG_PRINT("Free heap: "); DEBUG_PRINTLN(ESP.getFreeHeap());
DEBUG_PRINT("Wifi state: "); DEBUG_PRINTLN(WiFi.status());
if (WiFi.status() != lastWifiState)
{
wifiStateChangedTime = millis();
}
lastWifiState = WiFi.status();
DEBUG_PRINT("State time: "); DEBUG_PRINTLN(wifiStateChangedTime);
DEBUG_PRINT("NTP last sync: "); DEBUG_PRINTLN(ntpLastSyncTime);
DEBUG_PRINT("Client IP: "); DEBUG_PRINTLN(WiFi.localIP());
DEBUG_PRINT("Loops/sec: "); DEBUG_PRINTLN(loops / 10);
loops = 0;
debugTime = millis();
}
loops++;
#endif
2016-09-11 23:07:18 +02:00
}