lba.gitea/WLED
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
17b2578974
WLED/readme.md

74 lines
2.8 KiB
Markdown
Raw Normal View History

Release of WLED 0.4 - the BLINKEN update Added setting to change default boot preset Changed default NTP server Removed keywords.txt from dependencies because IDE would consider it as an (invalid) library Updated readme Updated binaries to 0.4
2017-12-12 14:52:28 +01:00
## Welcome to my project WLED!
FAILED: Started to implement Sweep transition, revert for now
2017-10-28 22:22:37 +02:00
WLED is a basic, fast and (relatively) secure implementation of a ESP8266 webserver to control Neopixel (WS2812B) leds
XML settings done
2016-09-11 23:07:18 +02:00
Release of WLED 0.4 - the BLINKEN update Added setting to change default boot preset Changed default NTP server Removed keywords.txt from dependencies because IDE would consider it as an (invalid) library Updated readme Updated binaries to 0.4
2017-12-12 14:52:28 +01:00
Uses ESP Arduino core version 2.3.0 (latest as of December 2017).
NTP added added more settings updated readme improved boot time
2016-12-29 00:03:58 +01:00
Release of WLED 0.4 - the BLINKEN update Added setting to change default boot preset Changed default NTP server Removed keywords.txt from dependencies because IDE would consider it as an (invalid) library Updated readme Updated binaries to 0.4
2017-12-12 14:52:28 +01:00
### Features: (V0.4)
Release of WLED 0.3 version bump minor tweaks compressed HTMLs changed SN behavior to control direct notifications removed nightlight notification due to severe uselessness removed unnecessary bool2int function Updated binary
2017-05-08 21:46:04 +02:00
- RGB, HSB, and brightness sliders
XML settings done
2016-09-11 23:07:18 +02:00
- Settings page - configuration over network
- Access Point and station mode - automatic failsafe AP
Release of WLED 0.4 - the BLINKEN update Added setting to change default boot preset Changed default NTP server Removed keywords.txt from dependencies because IDE would consider it as an (invalid) library Updated readme Updated binaries to 0.4
2017-12-12 14:52:28 +01:00
- WS2812FX library integrated for over 50 special effects!
- Secondary color support lets you use even more effect combinations
FAILED: Started to implement Sweep transition, revert for now
2017-10-28 22:22:37 +02:00
- Support for RGBW strips
Release of WLED 0.4 - the BLINKEN update Added setting to change default boot preset Changed default NTP server Removed keywords.txt from dependencies because IDE would consider it as an (invalid) library Updated readme Updated binaries to 0.4
2017-12-12 14:52:28 +01:00
- 25 user presets! Save your favorite colors and effects and apply them easily!
NTP added added more settings updated readme improved boot time
2016-12-29 00:03:58 +01:00
- Nightlight function (gradually dims down)
- Notifier function (multiple ESPs sync color via UDP broadcast)
- Support for power pushbutton
Release of WLED 0.4 - the BLINKEN update Added setting to change default boot preset Changed default NTP server Removed keywords.txt from dependencies because IDE would consider it as an (invalid) library Updated readme Updated binaries to 0.4
2017-12-12 14:52:28 +01:00
- Custom Theater Chase
NTP added added more settings updated readme improved boot time
2016-12-29 00:03:58 +01:00
- Full OTA software update capability
- Password protected OTA page for added security (OTA lock)
Added Alexa support
2017-02-21 23:59:47 +01:00
- Alexa smart home device server
Added Cronixie backlight with current limiting (API NB) Added API functions ND, NT and NF Moved information from readme to wiki Removed todo.txt HTTP API is now available again while WARLS active
2017-12-19 16:12:51 +01:00
- NTP and experimental analog clock function
- Realtime UDP Packet Control (WARLS) possible
Release of WLED 0.3 version bump minor tweaks compressed HTMLs changed SN behavior to control direct notifications removed nightlight notification due to severe uselessness removed unnecessary bool2int function Updated binary
2017-05-08 21:46:04 +02:00
- client HTML controlled
added power button to html made spiffs optional (disabled by default)
2017-05-08 21:00:06 +02:00
- Edit page. Change html and other files via OTA. (needs to be enabled in source)
Added (highly unstable and experimental) NTP time support Added timezones library (CET for now, you can easily adapt it to your timezone however) Added overlays to support both digital and analog clockfaces, basic countdown Improved serial debug Included license notes in settings file Added a bit of guides to readme file Warning! Using NTP usually results in a complete system crash after 1-48 hours. Please only enable it if you are willing to experiment with it. To get a proper WLED experience, make sure the checkbox for NTP is disabled in settings!
2017-01-15 00:24:28 +01:00
Release of WLED 0.4 - the BLINKEN update Added setting to change default boot preset Changed default NTP server Removed keywords.txt from dependencies because IDE would consider it as an (invalid) library Updated readme Updated binaries to 0.4
2017-12-12 14:52:28 +01:00
### Compile settings:
- Board: WeMos D1 mini (untested with other HW, should work though)
- CPU frequency: 80 MHz
- Flash size : 4MB (3MB SPIFFS)
- Upload speed: 921600
Added (highly unstable and experimental) NTP time support Added timezones library (CET for now, you can easily adapt it to your timezone however) Added overlays to support both digital and analog clockfaces, basic countdown Improved serial debug Included license notes in settings file Added a bit of guides to readme file Warning! Using NTP usually results in a complete system crash after 1-48 hours. Please only enable it if you are willing to experiment with it. To get a proper WLED experience, make sure the checkbox for NTP is disabled in settings!
2017-01-15 00:24:28 +01:00
Release of WLED 0.4 - the BLINKEN update Added setting to change default boot preset Changed default NTP server Removed keywords.txt from dependencies because IDE would consider it as an (invalid) library Updated readme Updated binaries to 0.4
2017-12-12 14:52:28 +01:00
### Quick start guide:
Added (highly unstable and experimental) NTP time support Added timezones library (CET for now, you can easily adapt it to your timezone however) Added overlays to support both digital and analog clockfaces, basic countdown Improved serial debug Included license notes in settings file Added a bit of guides to readme file Warning! Using NTP usually results in a complete system crash after 1-48 hours. Please only enable it if you are willing to experiment with it. To get a proper WLED experience, make sure the checkbox for NTP is disabled in settings!
2017-01-15 00:24:28 +01:00
Release of WLED 0.4 - the BLINKEN update Added setting to change default boot preset Changed default NTP server Removed keywords.txt from dependencies because IDE would consider it as an (invalid) library Updated readme Updated binaries to 0.4
2017-12-12 14:52:28 +01:00
- If you do not plan to change the software, you can use the supplied binary files instead-
Just flash a [basic HTTP OTA updater](https://github.com/Aircoookie/ESP8266MinimalHTTPUpdater) sketch and upload the bin!
added settings for alexa, led count, advanced included bin files
2017-02-24 23:21:48 +01:00
Release of WLED 0.4 - the BLINKEN update Added setting to change default boot preset Changed default NTP server Removed keywords.txt from dependencies because IDE would consider it as an (invalid) library Updated readme Updated binaries to 0.4
2017-12-12 14:52:28 +01:00
1. Connect a WS2812B RGB led strip to GPIO2. Optionally connect a NO-pushbutton to GPIO0 (internal pull-up) and ground.
Added (highly unstable and experimental) NTP time support Added timezones library (CET for now, you can easily adapt it to your timezone however) Added overlays to support both digital and analog clockfaces, basic countdown Improved serial debug Included license notes in settings file Added a bit of guides to readme file Warning! Using NTP usually results in a complete system crash after 1-48 hours. Please only enable it if you are willing to experiment with it. To get a proper WLED experience, make sure the checkbox for NTP is disabled in settings!
2017-01-15 00:24:28 +01:00
Embedded HTML in sketch to make SPIFFS data upload optional
2017-02-01 21:25:09 +01:00
2. Follow a guide to setup your Arduino client (I am using version 1.8.1) with the ESP8266 libraries.
Fixed Nightlight function added /version query updated readme
2017-04-26 14:04:53 +02:00
For current compiles I use version 2.3.0.
Added (highly unstable and experimental) NTP time support Added timezones library (CET for now, you can easily adapt it to your timezone however) Added overlays to support both digital and analog clockfaces, basic countdown Improved serial debug Included license notes in settings file Added a bit of guides to readme file Warning! Using NTP usually results in a complete system crash after 1-48 hours. Please only enable it if you are willing to experiment with it. To get a proper WLED experience, make sure the checkbox for NTP is disabled in settings!
2017-01-15 00:24:28 +01:00
added power button to html made spiffs optional (disabled by default)
2017-05-08 21:00:06 +02:00
3. In file "wled00.ino", you should change the access point and OTA update passphrases for added security (you can change them later, this is just the "factory default"). Flash the sketch.
Release of WLED 0.4 - the BLINKEN update Added setting to change default boot preset Changed default NTP server Removed keywords.txt from dependencies because IDE would consider it as an (invalid) library Updated readme Updated binaries to 0.4
2017-12-12 14:52:28 +01:00
You will need to install the NeoPixelBus library by Makuna. All other dependencies are included with WLED for convenience.
Added (highly unstable and experimental) NTP time support Added timezones library (CET for now, you can easily adapt it to your timezone however) Added overlays to support both digital and analog clockfaces, basic countdown Improved serial debug Included license notes in settings file Added a bit of guides to readme file Warning! Using NTP usually results in a complete system crash after 1-48 hours. Please only enable it if you are willing to experiment with it. To get a proper WLED experience, make sure the checkbox for NTP is disabled in settings!
2017-01-15 00:24:28 +01:00
5. Connect to automatically started WiFi access point "WLED-AP" using default passwort "wled1234". Go to the IP "192.168.4.1".
added power button to html made spiffs optional (disabled by default)
2017-05-08 21:00:06 +02:00
6. Click on the cog icon to edit settings like connecting the module to your home WiFi.
Added (highly unstable and experimental) NTP time support Added timezones library (CET for now, you can easily adapt it to your timezone however) Added overlays to support both digital and analog clockfaces, basic countdown Improved serial debug Included license notes in settings file Added a bit of guides to readme file Warning! Using NTP usually results in a complete system crash after 1-48 hours. Please only enable it if you are willing to experiment with it. To get a proper WLED experience, make sure the checkbox for NTP is disabled in settings!
2017-01-15 00:24:28 +01:00
7. Have fun with the software!
Added Cronixie backlight with current limiting (API NB) Added API functions ND, NT and NF Moved information from readme to wiki Removed todo.txt HTTP API is now available again while WARLS active
2017-12-19 16:12:51 +01:00
### Advanced module control via HTTP requests API or UDP:
Added (highly unstable and experimental) NTP time support Added timezones library (CET for now, you can easily adapt it to your timezone however) Added overlays to support both digital and analog clockfaces, basic countdown Improved serial debug Included license notes in settings file Added a bit of guides to readme file Warning! Using NTP usually results in a complete system crash after 1-48 hours. Please only enable it if you are willing to experiment with it. To get a proper WLED experience, make sure the checkbox for NTP is disabled in settings!
2017-01-15 00:24:28 +01:00
Updated readme, link to wiki Fixed unlock parameter
2017-12-12 15:54:23 +01:00
See the [wiki](https://github.com/Aircoookie/WLED/wiki/HTTP-request-API)!
Release of WLED 0.4 - the BLINKEN update Added setting to change default boot preset Changed default NTP server Removed keywords.txt from dependencies because IDE would consider it as an (invalid) library Updated readme Updated binaries to 0.4
2017-12-12 14:52:28 +01:00
### Other
Added (highly unstable and experimental) NTP time support Added timezones library (CET for now, you can easily adapt it to your timezone however) Added overlays to support both digital and analog clockfaces, basic countdown Improved serial debug Included license notes in settings file Added a bit of guides to readme file Warning! Using NTP usually results in a complete system crash after 1-48 hours. Please only enable it if you are willing to experiment with it. To get a proper WLED experience, make sure the checkbox for NTP is disabled in settings!
2017-01-15 00:24:28 +01:00
Added Alexa support
2017-02-21 23:59:47 +01:00
Licensed under the MIT license
Uses libraries:
Release of WLED 0.4 - the BLINKEN update Added setting to change default boot preset Changed default NTP server Removed keywords.txt from dependencies because IDE would consider it as an (invalid) library Updated readme Updated binaries to 0.4
2017-12-12 14:52:28 +01:00
ESP8266 Arduino Core
NeoPixelBus by Makuna
[WS2812FX](https://github.com/kitesurfer1404/WS2812FX) by kitesurfer1404 (Aircoookie fork)
Time library
Added Alexa support
2017-02-21 23:59:47 +01:00
Timezone library by JChristensen
arduino-esp8266-alexa-multiple-wemo-switch by kakopappa
Release of WLED 0.4 - the BLINKEN update Added setting to change default boot preset Changed default NTP server Removed keywords.txt from dependencies because IDE would consider it as an (invalid) library Updated readme Updated binaries to 0.4
2017-12-12 14:52:28 +01:00
Uses Linearicons by Perxis! (link in settings page)
Updated readme
2017-02-05 00:12:35 +01:00
Added (highly unstable and experimental) NTP time support Added timezones library (CET for now, you can easily adapt it to your timezone however) Added overlays to support both digital and analog clockfaces, basic countdown Improved serial debug Included license notes in settings file Added a bit of guides to readme file Warning! Using NTP usually results in a complete system crash after 1-48 hours. Please only enable it if you are willing to experiment with it. To get a proper WLED experience, make sure the checkbox for NTP is disabled in settings!
2017-01-15 00:24:28 +01:00
Reference in New Issue Copy Permalink