WLED/wled00/wled.cpp

#define WLED_DEFINE_GLOBAL_VARS //only in one source file, wled.cpp!
#include "wled.h"
#include <Arduino.h>

/*
 * Main WLED class implementation. Mostly initialization and connection logic
 */

WLED::WLED()
{
}

// turns all LEDs off and restarts ESP
void WLED::reset()
{
  briT = 0;
  #ifdef WLED_ENABLE_WEBSOCKETS
  ws.closeAll(1012);
  #endif
  long dly = millis();
  while (millis() - dly < 450) {
    yield();        // enough time to send response to client
  }
  setAllLeds();
  DEBUG_PRINTLN("MODULE RESET");
  ESP.restart();
}

bool oappendi(int i)
{
  char s[11];
  sprintf(s, "%ld", i);
  return oappend(s);
}

bool oappend(const char* txt)
{
  uint16_t len = strlen(txt);
  if (olen + len >= OMAX)
    return false;        // buffer full
  strcpy(obuf + olen, txt);
  olen += len;
  return true;
}

void WLED::loop()
{
  handleIR();        // 2nd call to function needed for ESP32 to return valid results -- should be good for ESP8266, too
  handleConnection();
  handleSerial();
  handleNotifications();
  handleTransitions();
#ifdef WLED_ENABLE_DMX
  handleDMX();
#endif
  userLoop();
  usermods.loop();

  yield();
  handleIO();
  handleIR();
  handleNetworkTime();
  handleAlexa();

  handleOverlays();
  yield();
#ifdef WLED_USE_ANALOG_LEDS
  strip.setRgbwPwm();
#endif

  if (doReboot)
    reset();

  if (!realtimeMode || realtimeOverride)  // block stuff if WARLS/Adalight is enabled
  {
    if (apActive)
      dnsServer.processNextRequest();
#ifndef WLED_DISABLE_OTA
    if (WLED_CONNECTED && aOtaEnabled)
      ArduinoOTA.handle();
#endif
    handleNightlight();
    yield();

    handleHue();
    handleBlynk();

    yield();
    if (!offMode)
      strip.service();
  }
  yield();
#ifdef ESP8266
  MDNS.update();
#endif
  if (millis() - lastMqttReconnectAttempt > 30000) {
    if (lastMqttReconnectAttempt > millis()) rolloverMillis++; //millis() rolls over every 50 days
    initMqtt();
  }
  yield();
  handleWs();

// DEBUG serial logging
#ifdef WLED_DEBUG
  if (millis() - debugTime > 9999) {
    DEBUG_PRINTLN("---DEBUG INFO---");
    DEBUG_PRINT("Runtime: ");       DEBUG_PRINTLN(millis());
    DEBUG_PRINT("Unix time: ");     DEBUG_PRINTLN(now());
    DEBUG_PRINT("Free heap: ");     DEBUG_PRINTLN(ESP.getFreeHeap());
    DEBUG_PRINT("Wifi state: ");    DEBUG_PRINTLN(WiFi.status());

    if (WiFi.status() != lastWifiState) {
      wifiStateChangedTime = millis();
    }
    lastWifiState = WiFi.status();
    DEBUG_PRINT("State time: ");    DEBUG_PRINTLN(wifiStateChangedTime);
    DEBUG_PRINT("NTP last sync: "); DEBUG_PRINTLN(ntpLastSyncTime);
    DEBUG_PRINT("Client IP: ");     DEBUG_PRINTLN(WiFi.localIP());
    DEBUG_PRINT("Loops/sec: ");     DEBUG_PRINTLN(loops / 10);
    loops = 0;
    debugTime = millis();
  }
  loops++;
#endif        // WLED_DEBUG
}

void WLED::setup()
{
  EEPROM.begin(EEPSIZE);
  ledCount = EEPROM.read(229) + ((EEPROM.read(398) << 8) & 0xFF00);
  if (ledCount > MAX_LEDS || ledCount == 0)
    ledCount = 30;

#ifdef ESP8266
  #if LEDPIN == 3
    if (ledCount > MAX_LEDS_DMA)
      ledCount = MAX_LEDS_DMA;        // DMA method uses too much ram
  #endif
#endif
  Serial.begin(115200);
  Serial.setTimeout(50);
  DEBUG_PRINTLN();
  DEBUG_PRINT("---WLED ");
  DEBUG_PRINT(versionString);
  DEBUG_PRINT(" ");
  DEBUG_PRINT(VERSION);
  DEBUG_PRINTLN(" INIT---");
#ifdef ARDUINO_ARCH_ESP32
  DEBUG_PRINT("esp32 ");
  DEBUG_PRINTLN(ESP.getSdkVersion());
#else
  DEBUG_PRINT("esp8266 ");
  DEBUG_PRINTLN(ESP.getCoreVersion());
#endif
  int heapPreAlloc = ESP.getFreeHeap();
  DEBUG_PRINT("heap ");
  DEBUG_PRINTLN(ESP.getFreeHeap());
  registerUsermods();

  strip.init(EEPROM.read(372), ledCount, EEPROM.read(2204));        // init LEDs quickly
  strip.setBrightness(0);

  DEBUG_PRINT("LEDs inited. heap usage ~");
  DEBUG_PRINTLN(heapPreAlloc - ESP.getFreeHeap());

#ifndef WLED_DISABLE_FILESYSTEM
  #ifdef ARDUINO_ARCH_ESP32
    SPIFFS.begin(true);
  #endif
    SPIFFS.begin();
#endif

  DEBUG_PRINTLN("Load EEPROM");
  loadSettingsFromEEPROM(true);
  beginStrip();
  userSetup();
  usermods.setup();
  if (strcmp(clientSSID, DEFAULT_CLIENT_SSID) == 0)
    showWelcomePage = true;
  WiFi.persistent(false);

  if (macroBoot > 0)
    applyMacro(macroBoot);
  Serial.println("Ada");

  // generate module IDs
  escapedMac = WiFi.macAddress();
  escapedMac.replace(":", "");
  escapedMac.toLowerCase();
  if (strcmp(cmDNS, "x") == 0)        // fill in unique mdns default
  {
    strcpy(cmDNS, "wled-");
    sprintf(cmDNS + 5, "%*s", 6, escapedMac.c_str() + 6);
  }
  if (mqttDeviceTopic[0] == 0) {
    strcpy(mqttDeviceTopic, "wled/");
    sprintf(mqttDeviceTopic + 5, "%*s", 6, escapedMac.c_str() + 6);
  }
  if (mqttClientID[0] == 0) {
    strcpy(mqttClientID, "WLED-");
    sprintf(mqttClientID + 5, "%*s", 6, escapedMac.c_str() + 6);
  }

  strip.service();

#ifndef WLED_DISABLE_OTA
  if (aOtaEnabled) {
    ArduinoOTA.onStart([]() {
#ifdef ESP8266
      wifi_set_sleep_type(NONE_SLEEP_T);
#endif
      DEBUG_PRINTLN("Start ArduinoOTA");
    });
    if (strlen(cmDNS) > 0)
      ArduinoOTA.setHostname(cmDNS);
  }
#endif
#ifdef WLED_ENABLE_DMX
  initDMX();
#endif
  // HTTP server page init
  initServer();
}

void WLED::beginStrip()
{
  // Initialize NeoPixel Strip and button
  strip.setShowCallback(handleOverlayDraw);

#ifdef BTNPIN
  pinMode(BTNPIN, INPUT_PULLUP);
#endif

  if (bootPreset > 0)
    applyPreset(bootPreset, turnOnAtBoot);
  colorUpdated(NOTIFIER_CALL_MODE_INIT);

// init relay pin
#if RLYPIN >= 0
  pinMode(RLYPIN, OUTPUT);
#if RLYMDE
  digitalWrite(RLYPIN, bri);
#else
  digitalWrite(RLYPIN, !bri);
#endif
#endif

  // disable button if it is "pressed" unintentionally
#ifdef BTNPIN
  if (digitalRead(BTNPIN) == LOW)
    buttonEnabled = false;
#else
  buttonEnabled = false;
#endif
}

void WLED::initAP(bool resetAP)
{
  if (apBehavior == AP_BEHAVIOR_BUTTON_ONLY && !resetAP)
    return;

  if (!apSSID[0] || resetAP)
    strcpy(apSSID, "WLED-AP");
  if (resetAP)
    strcpy(apPass, DEFAULT_AP_PASS);
  DEBUG_PRINT("Opening access point ");
  DEBUG_PRINTLN(apSSID);
  WiFi.softAPConfig(IPAddress(4, 3, 2, 1), IPAddress(4, 3, 2, 1), IPAddress(255, 255, 255, 0));
  WiFi.softAP(apSSID, apPass, apChannel, apHide);

  if (!apActive)        // start captive portal if AP active
  {
    DEBUG_PRINTLN("Init AP interfaces");
    server.begin();
    if (udpPort > 0 && udpPort != ntpLocalPort) {
      udpConnected = notifierUdp.begin(udpPort);
    }
    if (udpRgbPort > 0 && udpRgbPort != ntpLocalPort && udpRgbPort != udpPort) {
      udpRgbConnected = rgbUdp.begin(udpRgbPort);
    }

    dnsServer.setErrorReplyCode(DNSReplyCode::NoError);
    dnsServer.start(53, "*", WiFi.softAPIP());
  }
  apActive = true;
}

void WLED::initConnection()
{
  #ifdef WLED_ENABLE_WEBSOCKETS
  ws.onEvent(wsEvent);
  #endif

  WiFi.disconnect(true);        // close old connections
#ifdef ESP8266
  WiFi.setPhyMode(WIFI_PHY_MODE_11N);
#endif

  if (staticIP[0] != 0 && staticGateway[0] != 0) {
    WiFi.config(staticIP, staticGateway, staticSubnet, IPAddress(8, 8, 8, 8));
  } else {
    WiFi.config(0U, 0U, 0U);
  }

  lastReconnectAttempt = millis();

  if (!WLED_WIFI_CONFIGURED) {
    DEBUG_PRINT("No connection configured. ");
    if (!apActive)
      initAP();        // instantly go to ap mode
    return;
  } else if (!apActive) {
    if (apBehavior == AP_BEHAVIOR_ALWAYS) {
      initAP();
    } else {
      DEBUG_PRINTLN("Access point disabled.");
      WiFi.softAPdisconnect(true);
      WiFi.mode(WIFI_STA);
    }
  }
  showWelcomePage = false;

  DEBUG_PRINT("Connecting to ");
  DEBUG_PRINT(clientSSID);
  DEBUG_PRINTLN("...");

#ifdef ESP8266
  WiFi.hostname(serverDescription);
#endif

  WiFi.begin(clientSSID, clientPass);

#ifdef ARDUINO_ARCH_ESP32
  WiFi.setSleep(!noWifiSleep);
  WiFi.setHostname(serverDescription);
#else
  wifi_set_sleep_type((noWifiSleep) ? NONE_SLEEP_T : MODEM_SLEEP_T);
#endif
}

void WLED::initInterfaces()
{
  DEBUG_PRINTLN("Init STA interfaces");

  if (hueIP[0] == 0) {
    hueIP[0] = WiFi.localIP()[0];
    hueIP[1] = WiFi.localIP()[1];
    hueIP[2] = WiFi.localIP()[2];
  }

  // init Alexa hue emulation
  if (alexaEnabled)
    alexaInit();

#ifndef WLED_DISABLE_OTA
  if (aOtaEnabled)
    ArduinoOTA.begin();
#endif

  strip.service();
  // Set up mDNS responder:
  if (strlen(cmDNS) > 0) {
    if (!aOtaEnabled)
      MDNS.begin(cmDNS);

    DEBUG_PRINTLN("mDNS started");
    MDNS.addService("http", "tcp", 80);
    MDNS.addService("wled", "tcp", 80);
    MDNS.addServiceTxt("wled", "tcp", "mac", escapedMac.c_str());
  }
  server.begin();

  if (udpPort > 0 && udpPort != ntpLocalPort) {
    udpConnected = notifierUdp.begin(udpPort);
    if (udpConnected && udpRgbPort != udpPort)
      udpRgbConnected = rgbUdp.begin(udpRgbPort);
  }
  if (ntpEnabled)
    ntpConnected = ntpUdp.begin(ntpLocalPort);

  initBlynk(blynkApiKey);
  e131.begin(e131Multicast, e131Port, e131Universe, E131_MAX_UNIVERSE_COUNT);
  reconnectHue();
  initMqtt();
  interfacesInited = true;
  wasConnected = true;
}

byte stacO = 0;
uint32_t lastHeap;
unsigned long heapTime = 0;

void WLED::handleConnection()
{
  if (millis() < 2000 && (!WLED_WIFI_CONFIGURED || apBehavior == AP_BEHAVIOR_ALWAYS))
    return;
  if (lastReconnectAttempt == 0)
    initConnection();

  // reconnect WiFi to clear stale allocations if heap gets too low
  if (millis() - heapTime > 5000) {
    uint32_t heap = ESP.getFreeHeap();
    if (heap < 9000 && lastHeap < 9000) {
      DEBUG_PRINT("Heap too low! ");
      DEBUG_PRINTLN(heap);
      forceReconnect = true;
    }
    lastHeap = heap;
    heapTime = millis();
  }

  byte stac = 0;
  if (apActive) {
#ifdef ESP8266
    stac = wifi_softap_get_station_num();
#else
    wifi_sta_list_t stationList;
    esp_wifi_ap_get_sta_list(&stationList);
    stac = stationList.num;
#endif
    if (stac != stacO) {
      stacO = stac;
      DEBUG_PRINT("Connected AP clients: ");
      DEBUG_PRINTLN(stac);
      if (!WLED_CONNECTED && WLED_WIFI_CONFIGURED) {        // trying to connect, but not connected
        if (stac)
          WiFi.disconnect();        // disable search so that AP can work
        else
          initConnection();        // restart search
      }
    }
  }
  if (forceReconnect) {
    DEBUG_PRINTLN("Forcing reconnect.");
    initConnection();
    interfacesInited = false;
    forceReconnect = false;
    wasConnected = false;
    return;
  }
  if (!WLED_CONNECTED) {
    if (interfacesInited) {
      DEBUG_PRINTLN("Disconnected!");
      interfacesInited = false;
      initConnection();
    }
    if (millis() - lastReconnectAttempt > ((stac) ? 300000 : 20000) && WLED_WIFI_CONFIGURED)
      initConnection();
    if (!apActive && millis() - lastReconnectAttempt > 12000 && (!wasConnected || apBehavior == AP_BEHAVIOR_NO_CONN))
      initAP();
  } else if (!interfacesInited) {        // newly connected
    DEBUG_PRINTLN("");
    DEBUG_PRINT("Connected! IP address: ");
    DEBUG_PRINTLN(WiFi.localIP());
    initInterfaces();
    userConnected();
    usermods.connected();

    // shut down AP
    if (apBehavior != AP_BEHAVIOR_ALWAYS && apActive) {
      dnsServer.stop();
      WiFi.softAPdisconnect(true);
      apActive = false;
      DEBUG_PRINTLN("Access point disabled.");
    }
  }
}