lba.gitea/WLED
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
45430aafdc
WLED/readme.md

56 lines
1.8 KiB
Markdown
Raw Normal View History

Release of WLED 0.4 - the BLINKEN update Added setting to change default boot preset Changed default NTP server Removed keywords.txt from dependencies because IDE would consider it as an (invalid) library Updated readme Updated binaries to 0.4
2017-12-12 14:52:28 +01:00
## Welcome to my project WLED!
Attempted to mitigate flickering on ESP32 Replaced broken effect 34, now a quad-color running effect Added new binaries and guide Updated readme
2018-01-10 23:57:58 +01:00
WLED is a fast and (relatively) secure implementation of an ESP8266 webserver to control NeoPixel (WS2812B) LEDs!
Now also with experimental ESP32 support.
XML settings done
2016-09-11 23:07:18 +02:00
Release of WLED 0.4 - the BLINKEN update Added setting to change default boot preset Changed default NTP server Removed keywords.txt from dependencies because IDE would consider it as an (invalid) library Updated readme Updated binaries to 0.4
2017-12-12 14:52:28 +01:00
Uses ESP Arduino core version 2.3.0 (latest as of December 2017).
NTP added added more settings updated readme improved boot time
2016-12-29 00:03:58 +01:00
Attempted to mitigate flickering on ESP32 Replaced broken effect 34, now a quad-color running effect Added new binaries and guide Updated readme
2018-01-10 23:57:58 +01:00
### Features: (V0.5dev)
Release of WLED 0.3 version bump minor tweaks compressed HTMLs changed SN behavior to control direct notifications removed nightlight notification due to severe uselessness removed unnecessary bool2int function Updated binary
2017-05-08 21:46:04 +02:00
- RGB, HSB, and brightness sliders
XML settings done
2016-09-11 23:07:18 +02:00
- Settings page - configuration over network
- Access Point and station mode - automatic failsafe AP
Release of WLED 0.4 - the BLINKEN update Added setting to change default boot preset Changed default NTP server Removed keywords.txt from dependencies because IDE would consider it as an (invalid) library Updated readme Updated binaries to 0.4
2017-12-12 14:52:28 +01:00
- WS2812FX library integrated for over 50 special effects!
- Secondary color support lets you use even more effect combinations
FAILED: Started to implement Sweep transition, revert for now
2017-10-28 22:22:37 +02:00
- Support for RGBW strips
Release of WLED 0.4 - the BLINKEN update Added setting to change default boot preset Changed default NTP server Removed keywords.txt from dependencies because IDE would consider it as an (invalid) library Updated readme Updated binaries to 0.4
2017-12-12 14:52:28 +01:00
- 25 user presets! Save your favorite colors and effects and apply them easily!
NTP added added more settings updated readme improved boot time
2016-12-29 00:03:58 +01:00
- Nightlight function (gradually dims down)
- Notifier function (multiple ESPs sync color via UDP broadcast)
- Support for power pushbutton
Release of WLED 0.4 - the BLINKEN update Added setting to change default boot preset Changed default NTP server Removed keywords.txt from dependencies because IDE would consider it as an (invalid) library Updated readme Updated binaries to 0.4
2017-12-12 14:52:28 +01:00
- Custom Theater Chase
Attempted to mitigate flickering on ESP32 Replaced broken effect 34, now a quad-color running effect Added new binaries and guide Updated readme
2018-01-10 23:57:58 +01:00
- Full OTA software update capability (only ESP8266)
NTP added added more settings updated readme improved boot time
2016-12-29 00:03:58 +01:00
- Password protected OTA page for added security (OTA lock)
Attempted to mitigate flickering on ESP32 Replaced broken effect 34, now a quad-color running effect Added new binaries and guide Updated readme
2018-01-10 23:57:58 +01:00
- Alexa smart home device server (including dimming)
Added Cronixie backlight with current limiting (API NB) Added API functions ND, NT and NF Moved information from readme to wiki Removed todo.txt HTTP API is now available again while WARLS active
2017-12-19 16:12:51 +01:00
- NTP and experimental analog clock function
Attempted to mitigate flickering on ESP32 Replaced broken effect 34, now a quad-color running effect Added new binaries and guide Updated readme
2018-01-10 23:57:58 +01:00
- Support for the Cronixie Clock kit by Diamex
Added Cronixie backlight with current limiting (API NB) Added API functions ND, NT and NF Moved information from readme to wiki Removed todo.txt HTTP API is now available again while WARLS active
2017-12-19 16:12:51 +01:00
- Realtime UDP Packet Control (WARLS) possible
Attempted to mitigate flickering on ESP32 Replaced broken effect 34, now a quad-color running effect Added new binaries and guide Updated readme
2018-01-10 23:57:58 +01:00
- Client HTML UI controlled
Added (highly unstable and experimental) NTP time support Added timezones library (CET for now, you can easily adapt it to your timezone however) Added overlays to support both digital and analog clockfaces, basic countdown Improved serial debug Included license notes in settings file Added a bit of guides to readme file Warning! Using NTP usually results in a complete system crash after 1-48 hours. Please only enable it if you are willing to experiment with it. To get a proper WLED experience, make sure the checkbox for NTP is disabled in settings!
2017-01-15 00:24:28 +01:00
Release of WLED 0.4 - the BLINKEN update Added setting to change default boot preset Changed default NTP server Removed keywords.txt from dependencies because IDE would consider it as an (invalid) library Updated readme Updated binaries to 0.4
2017-12-12 14:52:28 +01:00
### Compile settings:
- Board: WeMos D1 mini (untested with other HW, should work though)
- CPU frequency: 80 MHz
- Flash size : 4MB (3MB SPIFFS)
- Upload speed: 921600
Added (highly unstable and experimental) NTP time support Added timezones library (CET for now, you can easily adapt it to your timezone however) Added overlays to support both digital and analog clockfaces, basic countdown Improved serial debug Included license notes in settings file Added a bit of guides to readme file Warning! Using NTP usually results in a complete system crash after 1-48 hours. Please only enable it if you are willing to experiment with it. To get a proper WLED experience, make sure the checkbox for NTP is disabled in settings!
2017-01-15 00:24:28 +01:00
Attempted to mitigate flickering on ESP32 Replaced broken effect 34, now a quad-color running effect Added new binaries and guide Updated readme
2018-01-10 23:57:58 +01:00
### Quick start guide and documentation:
Added (highly unstable and experimental) NTP time support Added timezones library (CET for now, you can easily adapt it to your timezone however) Added overlays to support both digital and analog clockfaces, basic countdown Improved serial debug Included license notes in settings file Added a bit of guides to readme file Warning! Using NTP usually results in a complete system crash after 1-48 hours. Please only enable it if you are willing to experiment with it. To get a proper WLED experience, make sure the checkbox for NTP is disabled in settings!
2017-01-15 00:24:28 +01:00
Attempted to mitigate flickering on ESP32 Replaced broken effect 34, now a quad-color running effect Added new binaries and guide Updated readme
2018-01-10 23:57:58 +01:00
See the [wiki](https://github.com/Aircoookie/WLED/wiki)!
Release of WLED 0.4 - the BLINKEN update Added setting to change default boot preset Changed default NTP server Removed keywords.txt from dependencies because IDE would consider it as an (invalid) library Updated readme Updated binaries to 0.4
2017-12-12 14:52:28 +01:00
### Other
Added (highly unstable and experimental) NTP time support Added timezones library (CET for now, you can easily adapt it to your timezone however) Added overlays to support both digital and analog clockfaces, basic countdown Improved serial debug Included license notes in settings file Added a bit of guides to readme file Warning! Using NTP usually results in a complete system crash after 1-48 hours. Please only enable it if you are willing to experiment with it. To get a proper WLED experience, make sure the checkbox for NTP is disabled in settings!
2017-01-15 00:24:28 +01:00
Added Alexa support
2017-02-21 23:59:47 +01:00
Licensed under the MIT license
Uses libraries:
Attempted to mitigate flickering on ESP32 Replaced broken effect 34, now a quad-color running effect Added new binaries and guide Updated readme
2018-01-10 23:57:58 +01:00
ESP8266/ESP32 Arduino Core
Release of WLED 0.4 - the BLINKEN update Added setting to change default boot preset Changed default NTP server Removed keywords.txt from dependencies because IDE would consider it as an (invalid) library Updated readme Updated binaries to 0.4
2017-12-12 14:52:28 +01:00
NeoPixelBus by Makuna
[WS2812FX](https://github.com/kitesurfer1404/WS2812FX) by kitesurfer1404 (Aircoookie fork)
Time library
Added Alexa support
2017-02-21 23:59:47 +01:00
Timezone library by JChristensen
Attempted to mitigate flickering on ESP32 Replaced broken effect 34, now a quad-color running effect Added new binaries and guide Updated readme
2018-01-10 23:57:58 +01:00
Alexa code based on arduino-esp8266-alexa-multiple-wemo-switch by kakopappa
Added Alexa support
2017-02-21 23:59:47 +01:00
Release of WLED 0.4 - the BLINKEN update Added setting to change default boot preset Changed default NTP server Removed keywords.txt from dependencies because IDE would consider it as an (invalid) library Updated readme Updated binaries to 0.4
2017-12-12 14:52:28 +01:00
Uses Linearicons by Perxis! (link in settings page)
Updated readme
2017-02-05 00:12:35 +01:00
Added (highly unstable and experimental) NTP time support Added timezones library (CET for now, you can easily adapt it to your timezone however) Added overlays to support both digital and analog clockfaces, basic countdown Improved serial debug Included license notes in settings file Added a bit of guides to readme file Warning! Using NTP usually results in a complete system crash after 1-48 hours. Please only enable it if you are willing to experiment with it. To get a proper WLED experience, make sure the checkbox for NTP is disabled in settings!
2017-01-15 00:24:28 +01:00
Reference in New Issue Copy Permalink