2022-07-19 16:16:43 +02:00
# ifndef WLED_CONST_H
# define WLED_CONST_H
/*
* Readability defines and their associated numerical values + compile - time constants
*/
# define GRADIENT_PALETTE_COUNT 58
//Defaults
# define DEFAULT_CLIENT_SSID "Your_Network"
2022-11-20 15:55:38 +01:00
# define DEFAULT_AP_SSID "WLED-AP"
2022-07-19 16:16:43 +02:00
# define DEFAULT_AP_PASS "wled1234"
# define DEFAULT_OTA_PASS "wledota"
2023-05-31 17:35:43 +02:00
# define DEFAULT_MDNS_NAME "x"
2022-07-19 16:16:43 +02:00
//increase if you need more
# ifndef WLED_MAX_USERMODS
# ifdef ESP8266
# define WLED_MAX_USERMODS 4
# else
# define WLED_MAX_USERMODS 6
# endif
# endif
# ifndef WLED_MAX_BUSSES
# ifdef ESP8266
# define WLED_MAX_BUSSES 3
2022-12-31 17:06:18 +01:00
# define WLED_MIN_VIRTUAL_BUSSES 2
2022-07-19 16:16:43 +02:00
# else
2022-10-18 12:10:11 +02:00
# if defined(CONFIG_IDF_TARGET_ESP32C3) // 2 RMT, 6 LEDC, only has 1 I2S but NPB does not support it ATM
# define WLED_MAX_BUSSES 3 // will allow 2 digital & 1 analog (or the other way around)
2022-12-31 17:06:18 +01:00
# define WLED_MIN_VIRTUAL_BUSSES 3
2022-10-18 12:10:11 +02:00
# elif defined(CONFIG_IDF_TARGET_ESP32S2) // 4 RMT, 8 LEDC, only has 1 I2S bus, supported in NPB
2022-10-11 09:46:48 +02:00
# if defined(USERMOD_AUDIOREACTIVE) // requested by @softhack007 https://github.com/blazoncek/WLED/issues/33
2022-10-18 12:10:11 +02:00
# define WLED_MAX_BUSSES 6 // will allow 4 digital & 2 analog
2022-12-31 17:06:18 +01:00
# define WLED_MIN_VIRTUAL_BUSSES 4
2022-10-11 09:46:48 +02:00
# else
2022-10-18 12:10:11 +02:00
# define WLED_MAX_BUSSES 7 // will allow 5 digital & 2 analog
2022-12-31 17:06:18 +01:00
# define WLED_MIN_VIRTUAL_BUSSES 3
2022-10-11 09:46:48 +02:00
# endif
2022-10-18 12:10:11 +02:00
# elif defined(CONFIG_IDF_TARGET_ESP32S3) // 4 RMT, 8 LEDC, has 2 I2S but NPB does not support them ATM
# define WLED_MAX_BUSSES 6 // will allow 4 digital & 2 analog
2022-12-31 17:06:18 +01:00
# define WLED_MIN_VIRTUAL_BUSSES 4
2022-07-19 16:16:43 +02:00
# else
2022-10-11 09:46:48 +02:00
# if defined(USERMOD_AUDIOREACTIVE) // requested by @softhack007 https://github.com/blazoncek/WLED/issues/33
2022-09-11 00:09:59 +02:00
# define WLED_MAX_BUSSES 8
2022-12-31 17:06:18 +01:00
# define WLED_MIN_VIRTUAL_BUSSES 2
2022-09-11 00:09:59 +02:00
# else
# define WLED_MAX_BUSSES 10
2022-12-31 17:06:18 +01:00
# define WLED_MIN_VIRTUAL_BUSSES 0
2022-09-11 00:09:59 +02:00
# endif
2022-07-19 16:16:43 +02:00
# endif
# endif
2022-12-31 17:06:18 +01:00
# else
# ifdef ESP8266
# if WLED_MAX_BUSES > 5
# error Maximum number of buses is 5.
# endif
2022-12-31 18:58:52 +01:00
# define WLED_MIN_VIRTUAL_BUSSES (5-WLED_MAX_BUSSES)
2022-12-31 17:06:18 +01:00
# else
# if WLED_MAX_BUSES > 10
# error Maximum number of buses is 10.
# endif
2022-12-31 18:58:52 +01:00
# define WLED_MIN_VIRTUAL_BUSSES (10-WLED_MAX_BUSSES)
2022-12-31 17:06:18 +01:00
# endif
2022-07-19 16:16:43 +02:00
# endif
# ifndef WLED_MAX_BUTTONS
# ifdef ESP8266
# define WLED_MAX_BUTTONS 2
# else
# define WLED_MAX_BUTTONS 4
# endif
# endif
# ifdef ESP8266
# define WLED_MAX_COLOR_ORDER_MAPPINGS 5
# else
# define WLED_MAX_COLOR_ORDER_MAPPINGS 10
# endif
2023-02-14 17:11:58 +01:00
# if defined(WLED_MAX_LEDMAPS) && (WLED_MAX_LEDMAPS > 32 || WLED_MAX_LEDMAPS < 10)
# undef WLED_MAX_LEDMAPS
# endif
# ifndef WLED_MAX_LEDMAPS
# ifdef ESP8266
# define WLED_MAX_LEDMAPS 10
# else
# define WLED_MAX_LEDMAPS 16
# endif
# endif
2022-07-19 16:16:43 +02:00
//Usermod IDs
# define USERMOD_ID_RESERVED 0 //Unused. Might indicate no usermod present
# define USERMOD_ID_UNSPECIFIED 1 //Default value for a general user mod that does not specify a custom ID
# define USERMOD_ID_EXAMPLE 2 //Usermod "usermod_v2_example.h"
# define USERMOD_ID_TEMPERATURE 3 //Usermod "usermod_temperature.h"
# define USERMOD_ID_FIXNETSERVICES 4 //Usermod "usermod_Fix_unreachable_netservices.h"
# define USERMOD_ID_PIRSWITCH 5 //Usermod "usermod_PIR_sensor_switch.h"
# define USERMOD_ID_IMU 6 //Usermod "usermod_mpu6050_imu.h"
# define USERMOD_ID_FOUR_LINE_DISP 7 //Usermod "usermod_v2_four_line_display.h
# define USERMOD_ID_ROTARY_ENC_UI 8 //Usermod "usermod_v2_rotary_encoder_ui.h"
# define USERMOD_ID_AUTO_SAVE 9 //Usermod "usermod_v2_auto_save.h"
# define USERMOD_ID_DHT 10 //Usermod "usermod_dht.h"
# define USERMOD_ID_MODE_SORT 11 //Usermod "usermod_v2_mode_sort.h"
# define USERMOD_ID_VL53L0X 12 //Usermod "usermod_vl53l0x_gestures.h"
# define USERMOD_ID_MULTI_RELAY 13 //Usermod "usermod_multi_relay.h"
# define USERMOD_ID_ANIMATED_STAIRCASE 14 //Usermod "Animated_Staircase.h"
# define USERMOD_ID_RTC 15 //Usermod "usermod_rtc.h"
# define USERMOD_ID_ELEKSTUBE_IPS 16 //Usermod "usermod_elekstube_ips.h"
# define USERMOD_ID_SN_PHOTORESISTOR 17 //Usermod "usermod_sn_photoresistor.h"
2022-12-28 22:40:13 +01:00
# define USERMOD_ID_BATTERY 18 //Usermod "usermod_v2_battery.h"
2022-07-19 16:16:43 +02:00
# define USERMOD_ID_PWM_FAN 19 //Usermod "usermod_PWM_fan.h"
# define USERMOD_ID_BH1750 20 //Usermod "usermod_bh1750.h"
# define USERMOD_ID_SEVEN_SEGMENT_DISPLAY 21 //Usermod "usermod_v2_seven_segment_display.h"
# define USERMOD_RGB_ROTARY_ENCODER 22 //Usermod "rgb-rotary-encoder.h"
# define USERMOD_ID_QUINLED_AN_PENTA 23 //Usermod "quinled-an-penta.h"
# define USERMOD_ID_SSDR 24 //Usermod "usermod_v2_seven_segment_display_reloaded.h"
# define USERMOD_ID_CRONIXIE 25 //Usermod "usermod_cronixie.h"
# define USERMOD_ID_WIZLIGHTS 26 //Usermod "wizlights.h"
# define USERMOD_ID_WORDCLOCK 27 //Usermod "usermod_v2_word_clock.h"
# define USERMOD_ID_MY9291 28 //Usermod "usermod_MY9291.h"
# define USERMOD_ID_SI7021_MQTT_HA 29 //Usermod "usermod_si7021_mqtt_ha.h"
2022-07-21 10:48:37 +02:00
# define USERMOD_ID_BME280 30 //Usermod "usermod_bme280.h
2022-10-20 01:07:32 +02:00
# define USERMOD_ID_SMARTNEST 31 //Usermod "usermod_smartnest.h"
# define USERMOD_ID_AUDIOREACTIVE 32 //Usermod "audioreactive.h"
2022-10-20 10:12:17 +02:00
# define USERMOD_ID_ANALOG_CLOCK 33 //Usermod "Analog_Clock.h"
2022-10-21 01:47:25 +02:00
# define USERMOD_ID_PING_PONG_CLOCK 34 //Usermod "usermod_v2_ping_pong_clock.h"
2022-10-21 03:25:36 +02:00
# define USERMOD_ID_ADS1115 35 //Usermod "usermod_ads1115.h"
2022-12-08 19:41:50 +01:00
# define USERMOD_ID_BOBLIGHT 36 //Usermod "boblight.h"
2022-11-14 02:30:35 +01:00
# define USERMOD_ID_SD_CARD 37 //Usermod "usermod_sd_card.h"
2022-11-30 09:15:07 +01:00
# define USERMOD_ID_PWM_OUTPUTS 38 //Usermod "usermod_pwm_outputs.h
2022-12-11 01:16:14 +01:00
# define USERMOD_ID_SHT 39 //Usermod "usermod_sht.h
2023-02-27 21:01:32 +01:00
# define USERMOD_ID_KLIPPER 40 // Usermod Klipper percentage
2022-07-19 16:16:43 +02:00
//Access point behavior
# define AP_BEHAVIOR_BOOT_NO_CONN 0 //Open AP when no connection after boot
# define AP_BEHAVIOR_NO_CONN 1 //Open when no connection (either after boot or if connection is lost)
# define AP_BEHAVIOR_ALWAYS 2 //Always open
# define AP_BEHAVIOR_BUTTON_ONLY 3 //Only when button pressed for 6 sec
//Notifier callMode
# define CALL_MODE_INIT 0 //no updates on init, can be used to disable updates
# define CALL_MODE_DIRECT_CHANGE 1
# define CALL_MODE_BUTTON 2 //default button actions applied to selected segments
# define CALL_MODE_NOTIFICATION 3
# define CALL_MODE_NIGHTLIGHT 4
# define CALL_MODE_NO_NOTIFY 5
# define CALL_MODE_FX_CHANGED 6 //no longer used
# define CALL_MODE_HUE 7
# define CALL_MODE_PRESET_CYCLE 8
2023-02-21 17:07:32 +01:00
# define CALL_MODE_BLYNK 9 //no longer used
2022-07-19 16:16:43 +02:00
# define CALL_MODE_ALEXA 10
# define CALL_MODE_WS_SEND 11 //special call mode, not for notifier, updates websocket only
# define CALL_MODE_BUTTON_PRESET 12 //button/IR JSON preset/macro
//RGB to RGBW conversion mode
2023-02-14 01:33:06 +01:00
# define RGBW_MODE_MANUAL_ONLY 0 // No automatic white channel calculation. Manual white channel slider
# define RGBW_MODE_AUTO_BRIGHTER 1 // New algorithm. Adds as much white as the darkest RGBW channel
# define RGBW_MODE_AUTO_ACCURATE 2 // New algorithm. Adds as much white as the darkest RGBW channel and subtracts this amount from each RGB channel
# define RGBW_MODE_DUAL 3 // Manual slider + auto calculation. Automatically calculates only if manual slider is set to off (0)
# define RGBW_MODE_MAX 4 // Sets white to the value of the brightest RGB channel (good for white-only LEDs without any RGB)
//#define RGBW_MODE_LEGACY 4 // Old floating algorithm. Too slow for realtime and palette support (unused)
# define AW_GLOBAL_DISABLED 255 // Global auto white mode override disabled. Per-bus setting is used
2022-07-19 16:16:43 +02:00
//realtime modes
# define REALTIME_MODE_INACTIVE 0
# define REALTIME_MODE_GENERIC 1
# define REALTIME_MODE_UDP 2
# define REALTIME_MODE_HYPERION 3
# define REALTIME_MODE_E131 4
# define REALTIME_MODE_ADALIGHT 5
# define REALTIME_MODE_ARTNET 6
# define REALTIME_MODE_TPM2NET 7
# define REALTIME_MODE_DDP 8
//realtime override modes
# define REALTIME_OVERRIDE_NONE 0
# define REALTIME_OVERRIDE_ONCE 1
# define REALTIME_OVERRIDE_ALWAYS 2
//E1.31 DMX modes
# define DMX_MODE_DISABLED 0 //not used
# define DMX_MODE_SINGLE_RGB 1 //all LEDs same RGB color (3 channels)
# define DMX_MODE_SINGLE_DRGB 2 //all LEDs same RGB color and master dimmer (4 channels)
2023-01-16 17:30:55 +01:00
# define DMX_MODE_EFFECT 3 //trigger standalone effects of WLED (15 channels)
# define DMX_MODE_EFFECT_W 7 //trigger standalone effects of WLED (18 channels)
2022-07-19 16:16:43 +02:00
# define DMX_MODE_MULTIPLE_RGB 4 //every LED is addressed with its own RGB (ledCount * 3 channels)
# define DMX_MODE_MULTIPLE_DRGB 5 //every LED is addressed with its own RGB and share a master dimmer (ledCount * 3 + 1 channels)
# define DMX_MODE_MULTIPLE_RGBW 6 //every LED is addressed with its own RGBW (ledCount * 4 channels)
2023-01-16 17:30:55 +01:00
# define DMX_MODE_EFFECT_SEGMENT 8 //trigger standalone effects of WLED (15 channels per segement)
# define DMX_MODE_EFFECT_SEGMENT_W 9 //trigger standalone effects of WLED (18 channels per segement)
2022-11-19 14:10:40 +01:00
# define DMX_MODE_PRESET 10 //apply presets (1 channel)
2022-07-19 16:16:43 +02:00
//Light capability byte (unused) 0bRCCCTTTT
//bits 0/1/2/3: specifies a type of LED driver. A single "driver" may have different chip models but must have the same protocol/behavior
//bits 4/5/6: specifies the class of LED driver - 0b000 (dec. 0-15) unconfigured/reserved
// - 0b001 (dec. 16-31) digital (data pin only)
// - 0b010 (dec. 32-47) analog (PWM)
// - 0b011 (dec. 48-63) digital (data + clock / SPI)
// - 0b100 (dec. 64-79) unused/reserved
// - 0b101 (dec. 80-95) virtual network busses
// - 0b110 (dec. 96-111) unused/reserved
// - 0b111 (dec. 112-127) unused/reserved
//bit 7 is reserved and set to 0
# define TYPE_NONE 0 //light is not configured
# define TYPE_RESERVED 1 //unused. Might indicate a "virtual" light
//Digital types (data pin only) (16-31)
2023-02-14 01:33:06 +01:00
# define TYPE_WS2812_1CH 18 //white-only chips (1 channel per IC) (unused)
# define TYPE_WS2812_1CH_X3 19 //white-only chips (3 channels per IC)
# define TYPE_WS2812_2CH_X3 20 //CCT chips (1st IC controls WW + CW of 1st zone and CW of 2nd zone, 2nd IC controls WW of 2nd zone and WW + CW of 3rd zone)
2022-07-19 16:16:43 +02:00
# define TYPE_WS2812_WWA 21 //amber + warm + cold white
# define TYPE_WS2812_RGB 22
# define TYPE_GS8608 23 //same driver as WS2812, but will require signal 2x per second (else displays test pattern)
# define TYPE_WS2811_400KHZ 24 //half-speed WS2812 protocol, used by very old WS2811 units
2022-06-20 15:03:17 +02:00
# define TYPE_TM1829 25
2023-04-28 01:28:57 +02:00
# define TYPE_UCS8903 26
# define TYPE_UCS8904 29
2022-07-19 16:16:43 +02:00
# define TYPE_SK6812_RGBW 30
# define TYPE_TM1814 31
//"Analog" types (PWM) (32-47)
# define TYPE_ONOFF 40 //binary output (relays etc.)
# define TYPE_ANALOG_1CH 41 //single channel PWM. Uses value of brightest RGBW channel
# define TYPE_ANALOG_2CH 42 //analog WW + CW
# define TYPE_ANALOG_3CH 43 //analog RGB
# define TYPE_ANALOG_4CH 44 //analog RGBW
# define TYPE_ANALOG_5CH 45 //analog RGB + WW + CW
//Digital types (data + clock / SPI) (48-63)
# define TYPE_WS2801 50
# define TYPE_APA102 51
# define TYPE_LPD8806 52
# define TYPE_P9813 53
2021-12-28 00:06:58 +01:00
# define TYPE_LPD6803 54
2022-07-19 16:16:43 +02:00
//Network types (master broadcast) (80-95)
# define TYPE_NET_DDP_RGB 80 //network DDP RGB bus (master broadcast bus)
2022-09-02 03:12:03 +02:00
# define TYPE_NET_E131_RGB 81 //network E131 RGB bus (master broadcast bus, unused)
# define TYPE_NET_ARTNET_RGB 82 //network ArtNet RGB bus (master broadcast bus, unused)
# define TYPE_NET_DDP_RGBW 88 //network DDP RGBW bus (master broadcast bus)
2022-07-19 16:16:43 +02:00
# define IS_DIGITAL(t) ((t) & 0x10) //digital are 16-31 and 48-63
# define IS_PWM(t) ((t) > 40 && (t) < 46)
# define NUM_PWM_PINS(t) ((t) - 40) //for analog PWM 41-45 only
# define IS_2PIN(t) ((t) > 47)
//Color orders
# define COL_ORDER_GRB 0 //GRB(w),defaut
# define COL_ORDER_RGB 1 //common for WS2811
# define COL_ORDER_BRG 2
# define COL_ORDER_RBG 3
# define COL_ORDER_BGR 4
# define COL_ORDER_GBR 5
# define COL_ORDER_MAX 5
//Button type
# define BTN_TYPE_NONE 0
# define BTN_TYPE_RESERVED 1
# define BTN_TYPE_PUSH 2
# define BTN_TYPE_PUSH_ACT_HIGH 3
# define BTN_TYPE_SWITCH 4
# define BTN_TYPE_PIR_SENSOR 5
# define BTN_TYPE_TOUCH 6
# define BTN_TYPE_ANALOG 7
# define BTN_TYPE_ANALOG_INVERTED 8
//Ethernet board types
2023-05-08 08:48:52 +02:00
# define WLED_NUM_ETH_TYPES 11
2022-07-19 16:16:43 +02:00
# define WLED_ETH_NONE 0
# define WLED_ETH_WT32_ETH01 1
# define WLED_ETH_ESP32_POE 2
# define WLED_ETH_WESP32 3
# define WLED_ETH_QUINLED 4
# define WLED_ETH_TWILIGHTLORD 5
# define WLED_ETH_ESP32DEUX 6
2023-05-08 08:48:52 +02:00
# define WLED_ETH_ESP32ETHKITVE 7
# define WLED_ETH_QUINLED_OCTA 8
2023-04-28 17:15:31 +02:00
# define WLED_ETH_ABCWLEDV43ETH 9
2023-05-08 08:48:52 +02:00
# define WLED_ETH_SERG74 10
2022-07-19 16:16:43 +02:00
//Hue error codes
# define HUE_ERROR_INACTIVE 0
# define HUE_ERROR_UNAUTHORIZED 1
# define HUE_ERROR_LIGHTID 3
# define HUE_ERROR_PUSHLINK 101
# define HUE_ERROR_JSON_PARSING 250
# define HUE_ERROR_TIMEOUT 251
# define HUE_ERROR_ACTIVE 255
//Segment option byte bits
# define SEG_OPTION_SELECTED 0
# define SEG_OPTION_REVERSED 1
# define SEG_OPTION_ON 2
# define SEG_OPTION_MIRROR 3 //Indicates that the effect will be mirrored within the segment
2022-08-31 21:31:59 +02:00
# define SEG_OPTION_FREEZE 4 //Segment contents will not be refreshed
# define SEG_OPTION_RESET 5 //Segment runtime requires reset
# define SEG_OPTION_TRANSITIONAL 6
# define SEG_OPTION_REVERSED_Y 7
# define SEG_OPTION_MIRROR_Y 8
# define SEG_OPTION_TRANSPOSED 9
2022-07-19 16:16:43 +02:00
//Segment differs return byte
2022-11-13 12:13:49 +01:00
# define SEG_DIFFERS_BRI 0x01 // opacity
# define SEG_DIFFERS_OPT 0x02 // all segment options except: selected, reset & transitional
# define SEG_DIFFERS_COL 0x04 // colors
# define SEG_DIFFERS_FX 0x08 // effect/mode parameters
# define SEG_DIFFERS_BOUNDS 0x10 // segment start/stop ounds
# define SEG_DIFFERS_GSO 0x20 // grouping, spacing & offset
# define SEG_DIFFERS_SEL 0x80 // selected
2022-07-19 16:16:43 +02:00
//Playlist option byte
# define PL_OPTION_SHUFFLE 0x01
2023-02-14 01:33:06 +01:00
// Segment capability byte
# define SEG_CAPABILITY_RGB 0x01
# define SEG_CAPABILITY_W 0x02
# define SEG_CAPABILITY_CCT 0x04
2022-07-19 16:16:43 +02:00
// WLED Error modes
# define ERR_NONE 0 // All good :)
2023-06-07 21:43:32 +02:00
# define ERR_DENIED 1 // Permission denied
# define ERR_EEP_COMMIT 2 // Could not commit to EEPROM (wrong flash layout?) OBSOLETE
2022-08-09 15:20:00 +02:00
# define ERR_NOBUF 3 // JSON buffer was not released in time, request cannot be handled at this time
2022-07-19 16:16:43 +02:00
# define ERR_JSON 9 // JSON parsing failed (input too large?)
# define ERR_FS_BEGIN 10 // Could not init filesystem (no partition?)
# define ERR_FS_QUOTA 11 // The FS is full or the maximum file size is reached
# define ERR_FS_PLOAD 12 // It was attempted to load a preset that does not exist
# define ERR_FS_IRLOAD 13 // It was attempted to load an IR JSON cmd, but the "ir.json" file does not exist
# define ERR_FS_GENERAL 19 // A general unspecified filesystem error occured
# define ERR_OVERTEMP 30 // An attached temperature sensor has measured above threshold temperature (not implemented)
# define ERR_OVERCURRENT 31 // An attached current sensor has measured a current above the threshold (not implemented)
# define ERR_UNDERVOLT 32 // An attached voltmeter has measured a voltage below the threshold (not implemented)
2023-06-15 23:58:22 +02:00
// Timer mode types
2022-07-19 16:16:43 +02:00
# define NL_MODE_SET 0 //After nightlight time elapsed, set to target brightness
# define NL_MODE_FADE 1 //Fade to target brightness gradually
# define NL_MODE_COLORFADE 2 //Fade to target brightness and secondary color gradually
# define NL_MODE_SUN 3 //Sunrise/sunset. Target brightness is set immediately, then Sunrise effect is started. Max 60 min.
2023-06-15 23:58:22 +02:00
// Settings sub page IDs
# define SUBPAGE_MENU 0
# define SUBPAGE_WIFI 1
# define SUBPAGE_LEDS 2
# define SUBPAGE_UI 3
# define SUBPAGE_SYNC 4
# define SUBPAGE_TIME 5
# define SUBPAGE_SEC 6
# define SUBPAGE_DMX 7
# define SUBPAGE_UM 8
# define SUBPAGE_UPDATE 9
# define SUBPAGE_2D 10
# define SUBPAGE_LOCK 251
# define SUBPAGE_PINREQ 252
# define SUBPAGE_CSS 253
# define SUBPAGE_JS 254
# define SUBPAGE_WELCOME 255
2022-07-19 16:16:43 +02:00
# define NTP_PACKET_SIZE 48
2023-01-06 09:24:29 +01:00
//maximum number of rendered LEDs - this does not have to match max. physical LEDs, e.g. if there are virtual busses
2022-07-19 16:16:43 +02:00
# ifndef MAX_LEDS
# ifdef ESP8266
# define MAX_LEDS 1664 //can't rely on memory limit to limit this to 1600 LEDs
# else
# define MAX_LEDS 8192
# endif
# endif
# ifndef MAX_LED_MEMORY
2022-09-09 23:21:47 +02:00
# ifdef ESP8266
# define MAX_LED_MEMORY 4000
# else
2022-10-10 16:46:23 +02:00
# if defined(ARDUINO_ARCH_ESP32S2) || defined(ARDUINO_ARCH_ESP32C3)
2022-09-09 23:21:47 +02:00
# define MAX_LED_MEMORY 32000
# else
# define MAX_LED_MEMORY 64000
# endif
# endif
2022-07-19 16:16:43 +02:00
# endif
# ifndef MAX_LEDS_PER_BUS
# define MAX_LEDS_PER_BUS 2048 // may not be enough for fast LEDs (i.e. APA102)
# endif
// string temp buffer (now stored in stack locally)
# ifdef ESP8266
# define SETTINGS_STACK_BUF_SIZE 2048
# else
2023-01-06 09:24:29 +01:00
# define SETTINGS_STACK_BUF_SIZE 3096
2022-07-19 16:16:43 +02:00
# endif
# ifdef WLED_USE_ETHERNET
# define E131_MAX_UNIVERSE_COUNT 20
# else
# ifdef ESP8266
# define E131_MAX_UNIVERSE_COUNT 9
# else
# define E131_MAX_UNIVERSE_COUNT 12
# endif
# endif
2022-10-06 12:22:02 +02:00
2022-07-19 16:16:43 +02:00
# ifndef ABL_MILLIAMPS_DEFAULT
2022-10-03 19:34:52 +02:00
# define ABL_MILLIAMPS_DEFAULT 850 // auto lower brightness to stay close to milliampere limit
2022-07-19 16:16:43 +02:00
# else
2022-10-03 19:34:52 +02:00
# if ABL_MILLIAMPS_DEFAULT == 0 // disable ABL
# elif ABL_MILLIAMPS_DEFAULT < 250 // make sure value is at least 250
2022-10-02 23:23:24 +02:00
# warning "make sure value is at least 250"
2022-07-19 16:16:43 +02:00
# define ABL_MILLIAMPS_DEFAULT 250
# endif
# endif
// PWM settings
# ifndef WLED_PWM_FREQ
# ifdef ESP8266
# define WLED_PWM_FREQ 880 //PWM frequency proven as good for LEDs
# else
# define WLED_PWM_FREQ 19531
# endif
# endif
# define TOUCH_THRESHOLD 32 // limit to recognize a touch, higher value means more sensitive
// Size of buffer for API JSON object (increase for more segments)
# ifdef ESP8266
# define JSON_BUFFER_SIZE 10240
# else
# define JSON_BUFFER_SIZE 24576
# endif
2023-03-05 22:56:14 +01:00
//#define MIN_HEAP_SIZE (8k for AsyncWebServer)
# define MIN_HEAP_SIZE 8192
2022-07-19 16:16:43 +02:00
// Maximum size of node map (list of other WLED instances)
# ifdef ESP8266
# define WLED_MAX_NODES 24
# else
# define WLED_MAX_NODES 150
# endif
//this is merely a default now and can be changed at runtime
# ifndef LEDPIN
2022-10-13 07:51:52 +02:00
# if defined(ESP8266) || (defined(ARDUINO_ARCH_ESP32) && defined(WLED_USE_PSRAM)) || defined(CONFIG_IDF_TARGET_ESP32C3)
2022-07-19 16:16:43 +02:00
# define LEDPIN 2 // GPIO2 (D4) on Wemod D1 mini compatible boards
# else
# define LEDPIN 16 // aligns with GPIO2 (D4) on Wemos D1 mini32 compatible boards
# endif
# endif
# ifdef WLED_ENABLE_DMX
# if (LEDPIN == 2)
# undef LEDPIN
# define LEDPIN 1
# warning "Pin conflict compiling with DMX and LEDs on pin 2. The default LED pin has been changed to pin 1."
# endif
# endif
# ifndef DEFAULT_LED_COUNT
# define DEFAULT_LED_COUNT 30
# endif
2023-06-14 11:53:39 +02:00
# define INTERFACE_UPDATE_COOLDOWN 2000 // time in ms to wait between websockets, alexa, and MQTT updates
# define PIN_RETRY_COOLDOWN 3000 // time in ms after an incorrect attempt PIN and OTA pass will be rejected even if correct
# define PIN_TIMEOUT 900000 // time in ms after which the PIN will be required again, 15 minutes
2022-07-19 16:16:43 +02:00
2022-12-18 11:33:13 +01:00
// HW_PIN_SCL & HW_PIN_SDA are used for information in usermods settings page and usermods themselves
// which GPIO pins are actually used in a hardwarea layout (controller board)
# if defined(I2CSCLPIN) && !defined(HW_PIN_SCL)
# define HW_PIN_SCL I2CSCLPIN
# endif
# if defined(I2CSDAPIN) && !defined(HW_PIN_SDA)
# define HW_PIN_SDA I2CSDAPIN
# endif
// you cannot change HW I2C pins on 8266
2022-07-19 16:16:43 +02:00
# if defined(ESP8266) && defined(HW_PIN_SCL)
# undef HW_PIN_SCL
# endif
# if defined(ESP8266) && defined(HW_PIN_SDA)
# undef HW_PIN_SDA
# endif
2022-12-18 11:33:13 +01:00
// defaults for 1st I2C on ESP32 (Wire global)
2022-07-19 16:16:43 +02:00
# ifndef HW_PIN_SCL
2022-08-10 14:00:04 +02:00
# define HW_PIN_SCL SCL
2022-07-19 16:16:43 +02:00
# endif
# ifndef HW_PIN_SDA
2022-08-10 14:00:04 +02:00
# define HW_PIN_SDA SDA
2022-07-19 16:16:43 +02:00
# endif
2022-12-18 11:33:13 +01:00
// HW_PIN_SCLKSPI & HW_PIN_MOSISPI & HW_PIN_MISOSPI are used for information in usermods settings page and usermods themselves
// which GPIO pins are actually used in a hardwarea layout (controller board)
# if defined(SPISCLKPIN) && !defined(HW_PIN_CLOCKSPI)
# define HW_PIN_CLOCKSPI SPISCLKPIN
# endif
# if defined(SPIMOSIPIN) && !defined(HW_PIN_MOSISPI)
# define HW_PIN_MOSISPI SPIMOSIPIN
# endif
# if defined(SPIMISOPIN) && !defined(HW_PIN_MISOSPI)
# define HW_PIN_MISOSPI SPIMISOPIN
# endif
// you cannot change HW SPI pins on 8266
2022-07-19 16:16:43 +02:00
# if defined(ESP8266) && defined(HW_PIN_CLOCKSPI)
# undef HW_PIN_CLOCKSPI
# endif
# if defined(ESP8266) && defined(HW_PIN_DATASPI)
# undef HW_PIN_DATASPI
# endif
2022-08-25 21:57:43 +02:00
# if defined(ESP8266) && defined(HW_PIN_MISOSPI)
# undef HW_PIN_MISOSPI
# endif
2022-12-18 11:33:13 +01:00
// defaults for VSPI on ESP32 (SPI global, SPI.cpp) as HSPI is used by WLED (bus_wrapper.h)
2022-07-19 16:16:43 +02:00
# ifndef HW_PIN_CLOCKSPI
2022-08-10 14:00:04 +02:00
# define HW_PIN_CLOCKSPI SCK
2022-07-19 16:16:43 +02:00
# endif
# ifndef HW_PIN_DATASPI
2022-08-10 14:00:04 +02:00
# define HW_PIN_DATASPI MOSI
2022-07-19 16:16:43 +02:00
# endif
2022-08-25 21:57:43 +02:00
# ifndef HW_PIN_MISOSPI
# define HW_PIN_MISOSPI MISO
# endif
2022-07-19 16:16:43 +02:00
# endif
