WLED/wled00/button.cpp

#include "wled.h"

/*
 * Physical IO
 */

#define WLED_DEBOUNCE_THRESHOLD      50 // only consider button input of at least 50ms as valid (debouncing)
#define WLED_LONG_PRESS             600 // long press if button is released after held for at least 600ms
#define WLED_DOUBLE_PRESS           350 // double press if another press within 350ms after a short press
#define WLED_LONG_REPEATED_ACTION   300 // how often a repeated action (e.g. dimming) is fired on long press on button IDs >0
#define WLED_LONG_AP               5000 // how long button 0 needs to be held to activate WLED-AP
#define WLED_LONG_FACTORY_RESET   10000 // how long button 0 needs to be held to trigger a factory reset

static const char _mqtt_topic_button[] PROGMEM = "%s/button/%d";  // optimize flash usage

void shortPressAction(uint8_t b)
{
  if (!macroButton[b]) {
    switch (b) {
      case 0: toggleOnOff(); stateUpdated(CALL_MODE_BUTTON); break;
      case 1: ++effectCurrent %= strip.getModeCount(); colorUpdated(CALL_MODE_BUTTON); break;
    }
  } else {
    applyPreset(macroButton[b], CALL_MODE_BUTTON_PRESET);
  }

  // publish MQTT message
  if (buttonPublishMqtt && WLED_MQTT_CONNECTED) {
    char subuf[64];
    sprintf_P(subuf, _mqtt_topic_button, mqttDeviceTopic, (int)b);
    mqtt->publish(subuf, 0, false, "short");
  }
}

void longPressAction(uint8_t b)
{
  if (!macroLongPress[b]) {
    switch (b) {
      case 0: setRandomColor(col); colorUpdated(CALL_MODE_BUTTON); break;
      case 1: bri += 8; stateUpdated(CALL_MODE_BUTTON); buttonPressedTime[b] = millis(); break; // repeatable action
    }
  } else {
    applyPreset(macroLongPress[b], CALL_MODE_BUTTON_PRESET);
  }

  // publish MQTT message
  if (buttonPublishMqtt && WLED_MQTT_CONNECTED) {
    char subuf[64];
    sprintf_P(subuf, _mqtt_topic_button, mqttDeviceTopic, (int)b);
    mqtt->publish(subuf, 0, false, "long");
  }
}

void doublePressAction(uint8_t b)
{
  if (!macroDoublePress[b]) {
    switch (b) {
      //case 0: toggleOnOff(); colorUpdated(CALL_MODE_BUTTON); break; //instant short press on button 0 if no macro set
      case 1: ++effectPalette %= strip.getPaletteCount(); colorUpdated(CALL_MODE_BUTTON); break;
    }
  } else {
    applyPreset(macroDoublePress[b], CALL_MODE_BUTTON_PRESET);
  }

  // publish MQTT message
  if (buttonPublishMqtt && WLED_MQTT_CONNECTED) {
    char subuf[64];
    sprintf_P(subuf, _mqtt_topic_button, mqttDeviceTopic, (int)b);
    mqtt->publish(subuf, 0, false, "double");
  }
}

bool isButtonPressed(uint8_t i)
{
  if (btnPin[i]<0) return false;
  uint8_t pin = btnPin[i];

  switch (buttonType[i]) {
    case BTN_TYPE_NONE:
    case BTN_TYPE_RESERVED:
      break;
    case BTN_TYPE_PUSH:
    case BTN_TYPE_SWITCH:
      if (digitalRead(pin) == LOW) return true;
      break;
    case BTN_TYPE_PUSH_ACT_HIGH:
    case BTN_TYPE_PIR_SENSOR:
      if (digitalRead(pin) == HIGH) return true;
      break;
    case BTN_TYPE_TOUCH:
      #if defined(ARDUINO_ARCH_ESP32) && !defined(CONFIG_IDF_TARGET_ESP32C3)
      if (touchRead(pin) <= touchThreshold) return true;
      #endif
      break;
  }
  return false;
}

void handleSwitch(uint8_t b)
{
  // isButtonPressed() handles inverted/noninverted logic
  if (buttonPressedBefore[b] != isButtonPressed(b)) {
    buttonPressedTime[b] = millis();
    buttonPressedBefore[b] = !buttonPressedBefore[b];
  }

  if (buttonLongPressed[b] == buttonPressedBefore[b]) return;
    
  if (millis() - buttonPressedTime[b] > WLED_DEBOUNCE_THRESHOLD) { //fire edge event only after 50ms without change (debounce)
    if (!buttonPressedBefore[b]) { // on -> off
      if (macroButton[b]) applyPreset(macroButton[b], CALL_MODE_BUTTON_PRESET);
      else { //turn on
        if (!bri) {toggleOnOff(); stateUpdated(CALL_MODE_BUTTON);}
      } 
    } else {  // off -> on
      if (macroLongPress[b]) applyPreset(macroLongPress[b], CALL_MODE_BUTTON_PRESET);
      else { //turn off
        if (bri) {toggleOnOff(); stateUpdated(CALL_MODE_BUTTON);}
      } 
    }

    // publish MQTT message
    if (buttonPublishMqtt && WLED_MQTT_CONNECTED) {
      char subuf[64];
      if (buttonType[b] == BTN_TYPE_PIR_SENSOR) sprintf_P(subuf, PSTR("%s/motion/%d"), mqttDeviceTopic, (int)b);
      else sprintf_P(subuf, _mqtt_topic_button, mqttDeviceTopic, (int)b);
      mqtt->publish(subuf, 0, false, !buttonPressedBefore[b] ? "off" : "on");
    }

    buttonLongPressed[b] = buttonPressedBefore[b]; //save the last "long term" switch state
  }
}

#define ANALOG_BTN_READ_CYCLE 250   // min time between two analog reading cycles
#define STRIP_WAIT_TIME 6           // max wait time in case of strip.isUpdating() 
#define POT_SMOOTHING 0.25f         // smoothing factor for raw potentiometer readings
#define POT_SENSITIVITY 4           // changes below this amount are noise (POT scratching, or ADC noise)

void handleAnalog(uint8_t b)
{
  static uint8_t oldRead[WLED_MAX_BUTTONS] = {0};
  static float filteredReading[WLED_MAX_BUTTONS] = {0.0f};
  uint16_t rawReading;    // raw value from analogRead, scaled to 12bit

  #ifdef ESP8266
  rawReading = analogRead(A0) << 2;   // convert 10bit read to 12bit
  #else
  rawReading = analogRead(btnPin[b]); // collect at full 12bit resolution
  #endif
  yield();                            // keep WiFi task running - analog read may take several millis on ESP8266

  filteredReading[b] += POT_SMOOTHING * ((float(rawReading) / 16.0f) - filteredReading[b]); // filter raw input, and scale to [0..255]
  uint16_t aRead = max(min(int(filteredReading[b]), 255), 0);                               // squash into 8bit
  if(aRead <= POT_SENSITIVITY) aRead = 0;                                                   // make sure that 0 and 255 are used
  if(aRead >= 255-POT_SENSITIVITY) aRead = 255;

  if (buttonType[b] == BTN_TYPE_ANALOG_INVERTED) aRead = 255 - aRead;

  // remove noise & reduce frequency of UI updates
  if (abs(int(aRead) - int(oldRead[b])) <= POT_SENSITIVITY) return;  // no significant change in reading

  // Unomment the next lines if you still see flickering related to potentiometer
  // This waits until strip finishes updating (why: strip was not updating at the start of handleButton() but may have started during analogRead()?)
  //unsigned long wait_started = millis();
  //while(strip.isUpdating() && (millis() - wait_started < STRIP_WAIT_TIME)) {
  //  delay(1);
  //}
  //if (strip.isUpdating()) return; // give up 

  oldRead[b] = aRead;

  // if no macro for "short press" and "long press" is defined use brightness control
  if (!macroButton[b] && !macroLongPress[b]) {
    // if "double press" macro defines which option to change
    if (macroDoublePress[b] >= 250) {
      // global brightness
      if (aRead == 0) {
        briLast = bri;
        bri = 0;
      } else{
        bri = aRead;
      }
    } else if (macroDoublePress[b] == 249) {
      // effect speed
      effectSpeed = aRead;
    } else if (macroDoublePress[b] == 248) {
      // effect intensity
      effectIntensity = aRead;
    } else if (macroDoublePress[b] == 247) {
      // selected palette
      effectPalette = map(aRead, 0, 252, 0, strip.getPaletteCount()-1);
      effectPalette = constrain(effectPalette, 0, strip.getPaletteCount()-1);  // map is allowed to "overshoot", so we need to contrain the result
    } else if (macroDoublePress[b] == 200) {
      // primary color, hue, full saturation
      colorHStoRGB(aRead*256,255,col);
    } else {
      // otherwise use "double press" for segment selection
      WS2812FX::Segment& seg = strip.getSegment(macroDoublePress[b]);
      if (aRead == 0) {
        seg.setOption(SEG_OPTION_ON, 0); // off
      } else {
        seg.setOpacity(aRead, macroDoublePress[b]);
        seg.setOption(SEG_OPTION_ON, 1);
      }
      // this will notify clients of update (websockets,mqtt,etc)
      updateInterfaces(CALL_MODE_BUTTON);
    }
  } else {
    //TODO:
    // we can either trigger a preset depending on the level (between short and long entries)
    // or use it for RGBW direct control
  }
  colorUpdated(CALL_MODE_BUTTON);
}

void handleButton()
{
  static unsigned long lastRead = 0UL;
  bool analog = false;

  if (strip.isUpdating()) return; // don't interfere with strip updates. Our button will still be there in 1ms (next cycle)

  for (uint8_t b=0; b<WLED_MAX_BUTTONS; b++) {
    #ifdef ESP8266
    if ((btnPin[b]<0 && !(buttonType[b] == BTN_TYPE_ANALOG || buttonType[b] == BTN_TYPE_ANALOG_INVERTED)) || buttonType[b] == BTN_TYPE_NONE) continue;
    #else
    if (btnPin[b]<0 || buttonType[b] == BTN_TYPE_NONE) continue;
    #endif

    if (usermods.handleButton(b)) continue; // did usermod handle buttons

    if ((buttonType[b] == BTN_TYPE_ANALOG || buttonType[b] == BTN_TYPE_ANALOG_INVERTED) && millis() - lastRead > ANALOG_BTN_READ_CYCLE) {   // button is not a button but a potentiometer
      analog = true;
      handleAnalog(b); continue;
    }

    //button is not momentary, but switch. This is only suitable on pins whose on-boot state does not matter (NOT gpio0)
    if (buttonType[b] == BTN_TYPE_SWITCH || buttonType[b] == BTN_TYPE_PIR_SENSOR) {
      handleSwitch(b); continue;
    }

    //momentary button logic
    if (isButtonPressed(b)) { //pressed

      if (!buttonPressedBefore[b]) buttonPressedTime[b] = millis();
      buttonPressedBefore[b] = true;

      if (millis() - buttonPressedTime[b] > WLED_LONG_PRESS) { //long press
        if (!buttonLongPressed[b]) longPressAction(b);
        else if (b) { //repeatable action (~3 times per s) on button > 0
          longPressAction(b);
          buttonPressedTime[b] = millis() - WLED_LONG_REPEATED_ACTION; //300ms
        }
        buttonLongPressed[b] = true;
      }

    } else if (!isButtonPressed(b) && buttonPressedBefore[b]) { //released

      long dur = millis() - buttonPressedTime[b];
      if (dur < WLED_DEBOUNCE_THRESHOLD) {buttonPressedBefore[b] = false; continue;} //too short "press", debounce
      bool doublePress = buttonWaitTime[b]; //did we have a short press before?
      buttonWaitTime[b] = 0;

      if (b == 0 && dur > WLED_LONG_AP) { // long press on button 0 (when released)
        if (dur > WLED_LONG_FACTORY_RESET) { // factory reset if pressed > 10 seconds
          WLED_FS.format();
          clearEEPROM();
          doReboot = true;
        } else {
          WLED::instance().initAP(true);
        }
      } else if (!buttonLongPressed[b]) { //short press
        if (b != 1 && !macroDoublePress[b]) { //don't wait for double press on buttons without a default action if no double press macro set
          shortPressAction(b);
        } else { //double press if less than 350 ms between current press and previous short press release (buttonWaitTime!=0)
          if (doublePress) {
            doublePressAction(b);
          } else {
            buttonWaitTime[b] = millis();
          }
        }
      }
      buttonPressedBefore[b] = false;
      buttonLongPressed[b] = false;
    }

    //if 350ms elapsed since last short press release it is a short press
    if (buttonWaitTime[b] && millis() - buttonWaitTime[b] > WLED_DOUBLE_PRESS && !buttonPressedBefore[b]) {
      buttonWaitTime[b] = 0;
      shortPressAction(b);
    }
  }
  if (analog) lastRead = millis();
}

void handleIO()
{
  handleButton();
  
  //set relay when LEDs turn on
  if (strip.getBrightness())
  {
    lastOnTime = millis();
    if (offMode)
    {
      if (rlyPin>=0) {
        pinMode(rlyPin, OUTPUT);
        digitalWrite(rlyPin, rlyMde);
      }
      offMode = false;
    }
  } else if (millis() - lastOnTime > 600)
  {
    if (!offMode) {
      #ifdef ESP8266
      // turn off built-in LED if strip is turned off
      // this will break digital bus so will need to be reinitialised on On
      PinOwner ledPinOwner = pinManager.getPinOwner(LED_BUILTIN);
      if (!strip.isOffRefreshRequired() && (ledPinOwner == PinOwner::None || ledPinOwner == PinOwner::BusDigital)) {
        pinMode(LED_BUILTIN, OUTPUT);
        digitalWrite(LED_BUILTIN, HIGH);
      }
      #endif
      if (rlyPin>=0) {
        pinMode(rlyPin, OUTPUT);
        digitalWrite(rlyPin, !rlyMde);
      }
    }
    offMode = true;
  }
}