WLED/usermods/Enclosure_with_OLED_temp_ESP07/readme.md

46 lines
1.3 KiB
Markdown
Raw Normal View History

2020-01-18 22:06:26 +01:00
# Almost universal controller board for outdoor applications
This usermod is using ideas from @mrVanboy and @400killer
2020-04-08 14:35:32 +02:00
Installation of file: Copy and replace file in wled00 directory
2020-01-20 00:54:48 +01:00
## Project repository
- [Original repository](https://github.com/srg74/Controller-for-WLED-firmware) - Main controller repository
2020-01-18 22:06:26 +01:00
## Features
2020-01-18 23:40:52 +01:00
* SSD1306 128x32 and 128x64 I2C OLED display
* On screen IP address, SSID and controller status (e.g. ON or OFF, recent effect)
* Auto display shutoff for saving display lifetime
* Dallas temperature sensor
* Reporting temperature to MQTT broker
2020-01-18 22:06:26 +01:00
## Hardware
![Hardware connection](assets/controller.jpg)
2020-01-18 23:45:11 +01:00
## Functionality checked with
2020-01-18 23:40:52 +01:00
* ESP-07S
* PlatformIO
* SSD1306 128x32 I2C OLED display
* DS18B20 (temperature sensor)
* KY-022 (infrared receiver)
* Push button (N.O. momentary switch)
2020-01-18 22:06:26 +01:00
2020-01-18 22:16:51 +01:00
### Platformio requirements
2020-01-18 22:06:26 +01:00
Uncomment `U8g2@~2.27.3`,`DallasTemperature@~3.8.0`,`OneWire@~2.3.5 under` `[common]` section in `platformio.ini`:
```ini
# platformio.ini
...
2020-04-08 14:40:44 +02:00
[platformio]
...
; default_envs = esp01_1m_full
default_envs = esp07
...
2020-01-18 22:06:26 +01:00
[common]
...
lib_deps_external =
...
2020-01-20 21:28:39 +01:00
#For use SSD1306 OLED display uncomment following
2020-01-18 22:06:26 +01:00
U8g2@~2.27.3
#For Dallas sensor uncomment following 2 lines
DallasTemperature@~3.8.0
OneWire@~2.3.5
...
2020-01-18 23:40:52 +01:00
```