lba.gitea/WLED
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Enhanced usermods. (#2522)

Browse Source
This commit is contained in:
Blaž Kristan 2022-02-01 09:33:57 +01:00 committed by GitHub
parent 6e0e5c102e
commit 0a5a0bef48
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
11 changed files with 1885 additions and 862 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

30
usermods/PIR_sensor_switch/readme.md
View File

@ -9,16 +9,17 @@ The LED strip is switched [using a relay](https://github.com/Aircoookie/WLED/wik
## Webinterface
The info page in the web interface shows the remaining time of the off timer.
The info page in the web interface shows the remaining time of the off timer. Usermod can also be temporarily disbled/enabled from the info page by clicking PIR button.
## Sensor connection
My setup uses an HC-SR501 sensor, a HC-SR505 should also work.
My setup uses an HC-SR501 or HC-SR602 sensor, a HC-SR505 should also work.
The usermod uses GPIO13 (D1 mini pin D7) by default for the sensor signal but can be changed in the Usermod settings page.
[This example page](http://www.esp8266learning.com/wemos-mini-pir-sensor-example.php) describes how to connect the sensor.
Use the potentiometers on the sensor to set the time-delay to the minimum and the sensitivity to about half, or slightly above.
You can also use usermod's off timer instead of sensor's. In such case rotate the potentiometer to its shortest time possible (or use SR602 which lacks such potentiometer).
## Usermod installation
@ -59,6 +60,8 @@ void registerUsermods()
}
```
**NOTE:** Usermod has been included in master branch of WLED so it can be compiled in directly just by defining `-D USERMOD_PIRSWITCH` and optionaly `-D PIR_SENSOR_PIN=16` to override default pin.
## API to enable/disable the PIR sensor from outside. For example from another usermod.
To query or change the PIR sensor state the methods `bool PIRsensorEnabled()` and `void EnablePIRsensor(bool enable)` are available.
@ -95,8 +98,27 @@ class MyUsermod : public Usermod {
};
```
Have fun - @gegu
### Configuration options
Usermod can be configured in Usermods settings page.
* `PIRenabled` - enable/disable usermod
* `pin` - dynamically change GPIO pin where PIR sensor is attached to ESP
* `PIRoffSec` - number of seconds after PIR sensor deactivates when usermod triggers Off preset (or turns WLED off)
* `on-preset` - preset triggered when PIR activates (if this is 0 it will just turn WLED on)
* `off-preset` - preset triggered when PIR deactivates (if this is 0 it will just turn WLED off)
* `nighttime-only` - enable triggering only between sunset and sunrise (you will need to set up _NTP_, _Lat_ & _Lon_ in Time & Macro settings)
* `mqtt-only` - only send MQTT messages, do not interact with WLED
* `off-only` - only trigger presets or turn WLED on/off in WLED is not already on (displaying effect)
* `notifications` - enable or disable sending notifications to other WLED instances using Sync button
Have fun - @gegu & @blazoncek
## Change log
2021-04
* Adaptation for runtime configuration.
* Adaptation for runtime configuration.
2021-11
* Added information about dynamic configuration options
* Added option to temporary enable/disble usermod from WLED UI (Info dialog)

175
usermods/PIR_sensor_switch/usermod_PIR_sensor_switch.h
View File

@ -55,33 +55,29 @@ public:
bool PIRsensorEnabled() { return enabled; }
private:
// PIR sensor pin
int8_t PIRsensorPin = PIR_SENSOR_PIN;
// notification mode for colorUpdated()
const byte NotifyUpdateMode = CALL_MODE_NO_NOTIFY; // CALL_MODE_DIRECT_CHANGE
// delay before switch off after the sensor state goes LOW
uint32_t m_switchOffDelay = 600000; // 10min
// off timer start time
uint32_t m_offTimerStart = 0;
// current PIR sensor pin state
byte sensorPinState = LOW;
// PIR sensor enabled
bool enabled = true;
// status of initialisation
bool initDone = false;
// on and off presets
uint8_t m_onPreset = 0;
uint8_t m_offPreset = 0;
// flag to indicate that PIR sensor should activate WLED during nighttime only
bool m_nightTimeOnly = false;
// flag to send MQTT message only (assuming it is enabled)
bool m_mqttOnly = false;
// flag to enable triggering only if WLED is initially off (LEDs are not on, preventing running effect being overwritten by PIR)
bool m_offOnly = false;
bool PIRtriggered = false;
byte prevPreset = 0;
byte prevPlaylist = 0;
bool savedState = false;
uint32_t offTimerStart = 0; // off timer start time
byte NotifyUpdateMode = CALL_MODE_NO_NOTIFY; // notification mode for colorUpdated(): CALL_MODE_NO_NOTIFY or CALL_MODE_DIRECT_CHANGE
byte sensorPinState = LOW; // current PIR sensor pin state
bool initDone = false; // status of initialization
bool PIRtriggered = false;
unsigned long lastLoop = 0;
// configurable parameters
bool enabled = true; // PIR sensor enabled
int8_t PIRsensorPin = PIR_SENSOR_PIN; // PIR sensor pin
uint32_t m_switchOffDelay = 600000; // delay before switch off after the sensor state goes LOW (10min)
uint8_t m_onPreset = 0; // on preset
uint8_t m_offPreset = 0; // off preset
bool m_nightTimeOnly = false; // flag to indicate that PIR sensor should activate WLED during nighttime only
bool m_mqttOnly = false; // flag to send MQTT message only (assuming it is enabled)
// flag to enable triggering only if WLED is initially off (LEDs are not on, preventing running effect being overwritten by PIR)
bool m_offOnly = false;
// strings to reduce flash memory usage (used more than twice)
static const char _name[];
static const char _switchOffDelay[];
@ -91,30 +87,30 @@ private:
static const char _nightTime[];
static const char _mqttOnly[];
static const char _offOnly[];
static const char _notify[];
/**
* check if it is daytime
* if sunrise/sunset is not defined (no NTP or lat/lon) default to nighttime
*/
bool isDayTime() {
bool isDayTime = false;
updateLocalTime();
uint8_t hr = hour(localTime);
uint8_t mi = minute(localTime);
if (sunrise && sunset) {
if (hour(sunrise)<hr && hour(sunset)>hr) {
isDayTime = true;
return true;
} else {
if (hour(sunrise)==hr && minute(sunrise)<mi) {
isDayTime = true;
return true;
}
if (hour(sunset)==hr && minute(sunset)>mi) {
isDayTime = true;
return true;
}
}
}
return isDayTime;
return false;
}
/**
@ -124,17 +120,47 @@ private:
{
if (m_offOnly && bri && (switchOn || (!PIRtriggered && !switchOn))) return;
PIRtriggered = switchOn;
if (switchOn && m_onPreset) {
applyPreset(m_onPreset);
} else if (!switchOn && m_offPreset) {
applyPreset(m_offPreset);
} else if (switchOn && bri == 0) {
bri = briLast;
colorUpdated(NotifyUpdateMode);
} else if (!switchOn && bri != 0) {
briLast = bri;
bri = 0;
colorUpdated(NotifyUpdateMode);
if (switchOn) {
if (m_onPreset) {
if (currentPlaylist>0) prevPlaylist = currentPlaylist;
else if (currentPreset>0) prevPreset = currentPreset;
else {
saveTemporaryPreset();
savedState = true;
prevPlaylist = 0;
prevPreset = 0;
}
applyPreset(m_onPreset, NotifyUpdateMode);
return;
}
// preset not assigned
if (bri == 0) {
bri = briLast;
colorUpdated(NotifyUpdateMode);
}
} else {
if (m_offPreset) {
applyPreset(m_offPreset, NotifyUpdateMode);
return;
} else if (prevPlaylist) {
applyPreset(prevPlaylist, NotifyUpdateMode);
prevPlaylist = 0;
return;
} else if (prevPreset) {
applyPreset(prevPreset, NotifyUpdateMode);
prevPreset = 0;
return;
} else if (savedState) {
applyTemporaryPreset();
savedState = false;
return;
}
// preset not assigned
if (bri != 0) {
briLast = bri;
bri = 0;
colorUpdated(NotifyUpdateMode);
}
}
}
@ -160,12 +186,12 @@ private:
sensorPinState = pinState; // change previous state
if (sensorPinState == HIGH) {
m_offTimerStart = 0;
offTimerStart = 0;
if (!m_mqttOnly && (!m_nightTimeOnly || (m_nightTimeOnly && !isDayTime()))) switchStrip(true);
publishMqtt("on");
} else /*if (bri != 0)*/ {
// start switch off timer
m_offTimerStart = millis();
offTimerStart = millis();
}
return true;
}
@ -177,14 +203,14 @@ private:
*/
bool handleOffTimer()
{
if (m_offTimerStart > 0 && millis() - m_offTimerStart > m_switchOffDelay)
if (offTimerStart > 0 && millis() - offTimerStart > m_switchOffDelay)
{
if (enabled == true)
{
if (!m_mqttOnly && (!m_nightTimeOnly || (m_nightTimeOnly && !isDayTime()))) switchStrip(false);
publishMqtt("off");
}
m_offTimerStart = 0;
offTimerStart = 0;
return true;
}
return false;
@ -248,15 +274,25 @@ public:
JsonObject user = root["u"];
if (user.isNull()) user = root.createNestedObject("u");
if (enabled)
{
// off timer
String uiDomString = F("PIR <i class=\"icons\">&#xe325;</i>");
JsonArray infoArr = user.createNestedArray(uiDomString); // timer value
if (m_offTimerStart > 0)
String uiDomString = F("<button class=\"btn\" onclick=\"requestJson({");
uiDomString += FPSTR(_name);
uiDomString += F(":{");
uiDomString += FPSTR(_enabled);
if (enabled) {
uiDomString += F(":false}});\">");
uiDomString += F("PIR <i class=\"icons\">&#xe325;</i>");
} else {
uiDomString += F(":true}});\">");
uiDomString += F("PIR <i class=\"icons\">&#xe08f;</i>");
}
uiDomString += F("</button>");
JsonArray infoArr = user.createNestedArray(uiDomString); // timer value
if (enabled) {
if (offTimerStart > 0)
{
uiDomString = "";
unsigned int offSeconds = (m_switchOffDelay - (millis() - m_offTimerStart)) / 1000;
unsigned int offSeconds = (m_switchOffDelay - (millis() - offTimerStart)) / 1000;
if (offSeconds >= 3600)
{
uiDomString += (offSeconds / 3600);
@ -282,8 +318,6 @@ public:
infoArr.add(sensorPinState ? F("sensor on") : F("inactive"));
}
} else {
String uiDomString = F("PIR sensor");
JsonArray infoArr = user.createNestedArray(uiDomString);
infoArr.add(F("disabled"));
}
}
@ -302,11 +336,18 @@ public:
* readFromJsonState() can be used to receive data clients send to the /json/state part of the JSON API (state object).
* Values in the state object may be modified by connected clients
*/
/*
void readFromJsonState(JsonObject &root)
{
if (!initDone) return; // prevent crash on boot applyPreset()
JsonObject usermod = root[FPSTR(_name)];
if (!usermod.isNull()) {
if (usermod[FPSTR(_enabled)].is<bool>()) {
enabled = usermod[FPSTR(_enabled)].as<bool>();
}
}
}
*/
/**
* provide the changeable values
@ -314,14 +355,15 @@ public:
void addToConfig(JsonObject &root)
{
JsonObject top = root.createNestedObject(FPSTR(_name));
top[FPSTR(_enabled)] = enabled;
top[FPSTR(_enabled)] = enabled;
top[FPSTR(_switchOffDelay)] = m_switchOffDelay / 1000;
top["pin"] = PIRsensorPin;
top[FPSTR(_onPreset)] = m_onPreset;
top[FPSTR(_offPreset)] = m_offPreset;
top[FPSTR(_nightTime)] = m_nightTimeOnly;
top[FPSTR(_mqttOnly)] = m_mqttOnly;
top[FPSTR(_offOnly)] = m_offOnly;
top["pin"] = PIRsensorPin;
top[FPSTR(_onPreset)] = m_onPreset;
top[FPSTR(_offPreset)] = m_offPreset;
top[FPSTR(_nightTime)] = m_nightTimeOnly;
top[FPSTR(_mqttOnly)] = m_mqttOnly;
top[FPSTR(_offOnly)] = m_offOnly;
top[FPSTR(_notify)] = (NotifyUpdateMode != CALL_MODE_NO_NOTIFY);
DEBUG_PRINTLN(F("PIR config saved."));
}
@ -336,9 +378,9 @@ public:
bool oldEnabled = enabled;
int8_t oldPin = PIRsensorPin;
DEBUG_PRINT(FPSTR(_name));
JsonObject top = root[FPSTR(_name)];
if (top.isNull()) {
DEBUG_PRINT(FPSTR(_name));
DEBUG_PRINTLN(F(": No config found. (Using defaults.)"));
return false;
}
@ -351,7 +393,6 @@ public:
m_onPreset = top[FPSTR(_onPreset)] | m_onPreset;
m_onPreset = max(0,min(250,(int)m_onPreset));
m_offPreset = top[FPSTR(_offPreset)] | m_offPreset;
m_offPreset = max(0,min(250,(int)m_offPreset));
@ -359,7 +400,8 @@ public:
m_mqttOnly = top[FPSTR(_mqttOnly)] | m_mqttOnly;
m_offOnly = top[FPSTR(_offOnly)] | m_offOnly;
DEBUG_PRINT(FPSTR(_name));
NotifyUpdateMode = top[FPSTR(_notify)] ? CALL_MODE_DIRECT_CHANGE : CALL_MODE_NO_NOTIFY;
if (!initDone) {
// reading config prior to setup()
DEBUG_PRINTLN(F(" config loaded."));
@ -385,7 +427,7 @@ public:
DEBUG_PRINTLN(F(" config (re)loaded."));
}
// use "return !top["newestParameter"].isNull();" when updating Usermod with new features
return !top[FPSTR(_offOnly)].isNull();
return !top[FPSTR(_notify)].isNull();
}
/**
@ -407,3 +449,4 @@ const char PIRsensorSwitch::_offPreset[] PROGMEM = "off-preset";
const char PIRsensorSwitch::_nightTime[] PROGMEM = "nighttime-only";
const char PIRsensorSwitch::_mqttOnly[] PROGMEM = "mqtt-only";
const char PIRsensorSwitch::_offOnly[] PROGMEM = "off-only";
const char PIRsensorSwitch::_notify[] PROGMEM = "notifications";

24
usermods/RTC/usermod_rtc.h
View File

@ -3,6 +3,14 @@
#include "src/dependencies/time/DS1307RTC.h"
#include "wled.h"
#ifdef ARDUINO_ARCH_ESP32
#define HW_PIN_SCL 22
#define HW_PIN_SDA 21
#else
#define HW_PIN_SCL 5
#define HW_PIN_SDA 4
#endif
//Connect DS1307 to standard I2C pins (ESP32: GPIO 21 (SDA)/GPIO 22 (SCL))
class RTCUsermod : public Usermod {
@ -12,6 +20,8 @@ class RTCUsermod : public Usermod {
public:
void setup() {
PinManagerPinType pins[2] = { { HW_PIN_SCL, true }, { HW_PIN_SDA, true } };
if (!pinManager.allocateMultiplePins(pins, 2, PinOwner::HW_I2C)) { disabled = true; return; }
time_t rtcTime = RTC.get();
if (rtcTime) {
toki.setTime(rtcTime,TOKI_NO_MS_ACCURACY,TOKI_TS_RTC);
@ -22,12 +32,26 @@ class RTCUsermod : public Usermod {
}
void loop() {
if (strip.isUpdating()) return;
if (!disabled && toki.isTick()) {
time_t t = toki.second();
if (t != RTC.get()) RTC.set(t); //set RTC to NTP/UI-provided value
}
}
/*
* addToConfig() can be used to add custom persistent settings to the cfg.json file in the "um" (usermod) object.
* It will be called by WLED when settings are actually saved (for example, LED settings are saved)
* I highly recommend checking out the basics of ArduinoJson serialization and deserialization in order to use custom settings!
*/
void addToConfig(JsonObject& root)
{
JsonObject top = root.createNestedObject("RTC");
JsonArray pins = top.createNestedArray("pin");
pins.add(HW_PIN_SCL);
pins.add(HW_PIN_SDA);
}
uint16_t getId()
{
return USERMOD_ID_RTC;

91
usermods/Temperature/usermod_temperature.h
View File

@ -37,12 +37,12 @@ class UsermodTemperature : public Usermod {
// used to determine when we can read the sensors temperature
// we have to wait at least 93.75 ms after requestTemperatures() is called
unsigned long lastTemperaturesRequest;
float temperature = -100; // default to -100, DS18B20 only goes down to -50C
float temperature;
// indicates requestTemperatures has been called but the sensor measurement is not complete
bool waitingForConversion = false;
// flag set at startup if DS18B20 sensor not found, avoids trying to keep getting
// temperature if flashed to a board without a sensor attached
bool sensorFound = false;
byte sensorFound;
bool enabled = true;
@ -54,27 +54,47 @@ class UsermodTemperature : public Usermod {
//Dallas sensor quick (& dirty) reading. Credit to - Author: Peter Scargill, August 17th, 2013
float readDallas() {
byte i;
byte data[2];
byte data[9];
int16_t result; // raw data from sensor
if (!oneWire->reset()) return -127.0f; // send reset command and fail fast
oneWire->skip(); // skip ROM
oneWire->write(0xBE); // read (temperature) from EEPROM
for (i=0; i < 2; i++) data[i] = oneWire->read(); // first 2 bytes contain temperature
for (i=2; i < 8; i++) oneWire->read(); // read unused bytes
result = (data[1]<<4) | (data[0]>>4); // we only need whole part, we will add fraction when returning
if (data[1]&0x80) result |= 0xFF00; // fix negative value
oneWire->reset();
oneWire->skip(); // skip ROM
oneWire->write(0x44,parasite); // request new temperature reading (without parasite power)
return (float)result + ((data[0]&0x0008) ? 0.5f : 0.0f);
float retVal = -127.0f;
if (oneWire->reset()) { // if reset() fails there are no OneWire devices
oneWire->skip(); // skip ROM
oneWire->write(0xBE); // read (temperature) from EEPROM
oneWire->read_bytes(data, 9); // first 2 bytes contain temperature
#ifdef WLED_DEBUG
if (OneWire::crc8(data,8) != data[8]) {
DEBUG_PRINTLN(F("CRC error reading temperature."));
for (byte i=0; i < 9; i++) DEBUG_PRINTF("0x%02X ", data[i]);
DEBUG_PRINT(F(" => "));
DEBUG_PRINTF("0x%02X\n", OneWire::crc8(data,8));
}
#endif
switch(sensorFound) {
case 0x10: // DS18S20 has 9-bit precision
result = (data[1] << 8) | data[0];
retVal = float(result) * 0.5f;
break;
case 0x22: // DS18B20
case 0x28: // DS1822
case 0x3B: // DS1825
case 0x42: // DS28EA00
result = (data[1]<<4) | (data[0]>>4); // we only need whole part, we will add fraction when returning
if (data[1] & 0x80) result |= 0xF000; // fix negative value
retVal = float(result) + ((data[0] & 0x08) ? 0.5f : 0.0f);
break;
}
}
for (byte i=1; i<9; i++) data[0] &= data[i];
return data[0]==0xFF ? -127.0f : retVal;
}
void requestTemperatures() {
readDallas();
DEBUG_PRINTLN(F("Requesting temperature."));
oneWire->reset();
oneWire->skip(); // skip ROM
oneWire->write(0x44,parasite); // request new temperature reading (TODO: parasite would need special handling)
lastTemperaturesRequest = millis();
waitingForConversion = true;
DEBUG_PRINTLN(F("Requested temperature."));
}
void readTemperature() {
@ -102,10 +122,13 @@ class UsermodTemperature : public Usermod {
case 0x3B: // DS1825
case 0x42: // DS28EA00
DEBUG_PRINTLN(F("Sensor found."));
sensorFound = deviceAddress[0];
DEBUG_PRINTF("0x%02X\n", sensorFound);
return true;
}
}
}
DEBUG_PRINTLN(F("Sensor NOT found."));
return false;
}
@ -113,16 +136,16 @@ class UsermodTemperature : public Usermod {
void setup() {
int retries = 10;
sensorFound = 0;
temperature = -127.0f; // default to -127, DS18B20 only goes down to -50C
if (enabled) {
// config says we are enabled
DEBUG_PRINTLN(F("Allocating temperature pin..."));
// pin retrieved from cfg.json (readFromConfig()) prior to running setup()
if (temperaturePin >= 0 && pinManager.allocatePin(temperaturePin, true, PinOwner::UM_Temperature)) {
oneWire = new OneWire(temperaturePin);
if (!oneWire->reset()) {
sensorFound = false; // resetting 1-Wire bus yielded an error
} else {
while ((sensorFound=findSensor()) && retries--) {
if (oneWire->reset()) {
while (!findSensor() && retries--) {
delay(25); // try to find sensor
}
}
@ -131,7 +154,6 @@ class UsermodTemperature : public Usermod {
DEBUG_PRINTLN(F("Temperature pin allocation failed."));
}
temperaturePin = -1; // allocation failed
sensorFound = false;
}
}
lastMeasurement = millis() - readingInterval + 10000;
@ -139,8 +161,9 @@ class UsermodTemperature : public Usermod {
}
void loop() {
if (!enabled || strip.isUpdating()) return;
if (!enabled || !sensorFound || strip.isUpdating()) return;
static uint8_t errorCount = 0;
unsigned long now = millis();
// check to see if we are due for taking a measurement
@ -156,20 +179,26 @@ class UsermodTemperature : public Usermod {
}
// we were waiting for a conversion to complete, have we waited log enough?
if (now - lastTemperaturesRequest >= 100 /* 93.75ms per the datasheet but can be up to 750ms */) {
if (now - lastTemperaturesRequest >= 750 /* 93.75ms per the datasheet but can be up to 750ms */) {
readTemperature();
if (getTemperatureC() < -100.0f) {
if (++errorCount > 10) sensorFound = 0;
lastMeasurement = now - readingInterval + 300; // force new measurement in 300ms
return;
}
errorCount = 0;
if (WLED_MQTT_CONNECTED) {
char subuf[64];
strcpy(subuf, mqttDeviceTopic);
if (-100 <= temperature) {
if (temperature > -100.0f) {
// dont publish super low temperature as the graph will get messed up
// the DallasTemperature library returns -127C or -196.6F when problem
// reading the sensor
strcat_P(subuf, PSTR("/temperature"));
mqtt->publish(subuf, 0, false, String(temperature).c_str());
mqtt->publish(subuf, 0, false, String(getTemperatureC()).c_str());
strcat_P(subuf, PSTR("_f"));
mqtt->publish(subuf, 0, false, String((float)temperature * 1.8f + 32).c_str());
mqtt->publish(subuf, 0, false, String(getTemperatureF()).c_str());
} else {
// publish something else to indicate status?
}
@ -202,13 +231,13 @@ class UsermodTemperature : public Usermod {
JsonArray temp = user.createNestedArray(FPSTR(_name));
//temp.add(F("Loaded."));
if (temperature <= -100.0 || (!sensorFound && temperature == -1.0)) {
if (temperature <= -100.0f) {
temp.add(0);
temp.add(F(" Sensor Error!"));
return;
}
temp.add(degC ? temperature : (float)temperature * 1.8f + 32);
temp.add(degC ? getTemperatureC() : getTemperatureF());
if (degC) temp.add(F("°C"));
else temp.add(F("°F"));
}
@ -252,23 +281,21 @@ class UsermodTemperature : public Usermod {
bool readFromConfig(JsonObject &root) {
// we look for JSON object: {"Temperature": {"pin": 0, "degC": true}}
int8_t newTemperaturePin = temperaturePin;
DEBUG_PRINT(FPSTR(_name));
JsonObject top = root[FPSTR(_name)];
if (top.isNull()) {
DEBUG_PRINT(FPSTR(_name));
DEBUG_PRINTLN(F(": No config found. (Using defaults.)"));
return false;
}
enabled = top[FPSTR(_enabled)] | enabled;
newTemperaturePin = top["pin"] | newTemperaturePin;
// newTemperaturePin = min(33,max(-1,(int)newTemperaturePin)); // bounds check
degC = top["degC"] | degC;
readingInterval = top[FPSTR(_readInterval)] | readingInterval/1000;
readingInterval = min(120,max(10,(int)readingInterval)) * 1000; // convert to ms
parasite = top[FPSTR(_parasite)] | parasite;
DEBUG_PRINT(FPSTR(_name));
if (!initDone) {
// first run: reading from cfg.json
temperaturePin = newTemperaturePin;

25
usermods/VL53L0X_gestures/usermod_vl53l0x_gestures.h
View File

@ -21,6 +21,14 @@
#include <Wire.h>
#include <VL53L0X.h>
#ifdef ARDUINO_ARCH_ESP32
#define HW_PIN_SCL 22
#define HW_PIN_SDA 21
#else
#define HW_PIN_SCL 5
#define HW_PIN_SDA 4
#endif
#ifndef VL53L0X_MAX_RANGE_MM
#define VL53L0X_MAX_RANGE_MM 230 // max height in millimiters to react for motions
#endif
@ -42,6 +50,7 @@ class UsermodVL53L0XGestures : public Usermod {
//Private class members. You can declare variables and functions only accessible to your usermod here
unsigned long lastTime = 0;
VL53L0X sensor;
bool enabled = true;
bool wasMotionBefore = false;
bool isLongMotion = false;
@ -50,6 +59,8 @@ class UsermodVL53L0XGestures : public Usermod {
public:
void setup() {
PinManagerPinType pins[2] = { { HW_PIN_SCL, true }, { HW_PIN_SDA, true } };
if (!pinManager.allocateMultiplePins(pins, 2, PinOwner::HW_I2C)) { enabled = false; return; }
Wire.begin();
sensor.setTimeout(150);
@ -63,6 +74,7 @@ class UsermodVL53L0XGestures : public Usermod {
void loop() {
if (!enabled || strip.isUpdating()) return;
if (millis() - lastTime > VL53L0X_DELAY_MS)
{
lastTime = millis();
@ -110,6 +122,19 @@ class UsermodVL53L0XGestures : public Usermod {
}
}
/*
* addToConfig() can be used to add custom persistent settings to the cfg.json file in the "um" (usermod) object.
* It will be called by WLED when settings are actually saved (for example, LED settings are saved)
* I highly recommend checking out the basics of ArduinoJson serialization and deserialization in order to use custom settings!
*/
void addToConfig(JsonObject& root)
{
JsonObject top = root.createNestedObject("VL53L0x");
JsonArray pins = top.createNestedArray("pin");
pins.add(HW_PIN_SCL);
pins.add(HW_PIN_SDA);
}
/*
* getId() allows you to optionally give your V2 usermod an unique ID (please define it in const.h!).
* This could be used in the future for the system to determine whether your usermod is installed.

58
usermods/mpu6050_imu/usermod_mpu6050_imu.h
View File

@ -42,6 +42,14 @@
#include "Wire.h"
#endif
#ifdef ARDUINO_ARCH_ESP32
#define HW_PIN_SCL 22
#define HW_PIN_SDA 21
#else
#define HW_PIN_SCL 5
#define HW_PIN_SDA 4
#endif
// ================================================================
// === INTERRUPT DETECTION ROUTINE ===
// ================================================================
@ -55,7 +63,8 @@ void IRAM_ATTR dmpDataReady() {
class MPU6050Driver : public Usermod {
private:
MPU6050 mpu;
bool enabled = true;
// MPU control/status vars
bool dmpReady = false; // set true if DMP init was successful
uint8_t mpuIntStatus; // holds actual interrupt status byte from MPU
@ -84,6 +93,8 @@ class MPU6050Driver : public Usermod {
* setup() is called once at boot. WiFi is not yet connected at this point.
*/
void setup() {
PinManagerPinType pins[2] = { { HW_PIN_SCL, true }, { HW_PIN_SDA, true } };
if (!pinManager.allocateMultiplePins(pins, 2, PinOwner::HW_I2C)) { enabled = false; return; }
// join I2C bus (I2Cdev library doesn't do this automatically)
#if I2CDEV_IMPLEMENTATION == I2CDEV_ARDUINO_WIRE
Wire.begin();
@ -93,16 +104,16 @@ class MPU6050Driver : public Usermod {
#endif
// initialize device
Serial.println(F("Initializing I2C devices..."));
DEBUG_PRINTLN(F("Initializing I2C devices..."));
mpu.initialize();
pinMode(INTERRUPT_PIN, INPUT);
// verify connection
Serial.println(F("Testing device connections..."));
Serial.println(mpu.testConnection() ? F("MPU6050 connection successful") : F("MPU6050 connection failed"));
DEBUG_PRINTLN(F("Testing device connections..."));
DEBUG_PRINTLN(mpu.testConnection() ? F("MPU6050 connection successful") : F("MPU6050 connection failed"));
// load and configure the DMP
Serial.println(F("Initializing DMP..."));
DEBUG_PRINTLN(F("Initializing DMP..."));
devStatus = mpu.dmpInitialize();
// supply your own gyro offsets here, scaled for min sensitivity
@ -114,16 +125,16 @@ class MPU6050Driver : public Usermod {
// make sure it worked (returns 0 if so)
if (devStatus == 0) {
// turn on the DMP, now that it's ready
Serial.println(F("Enabling DMP..."));
DEBUG_PRINTLN(F("Enabling DMP..."));
mpu.setDMPEnabled(true);
// enable Arduino interrupt detection
Serial.println(F("Enabling interrupt detection (Arduino external interrupt 0)..."));
DEBUG_PRINTLN(F("Enabling interrupt detection (Arduino external interrupt 0)..."));
attachInterrupt(digitalPinToInterrupt(INTERRUPT_PIN), dmpDataReady, RISING);
mpuIntStatus = mpu.getIntStatus();
// set our DMP Ready flag so the main loop() function knows it's okay to use it
Serial.println(F("DMP ready! Waiting for first interrupt..."));
DEBUG_PRINTLN(F("DMP ready! Waiting for first interrupt..."));
dmpReady = true;
// get expected DMP packet size for later comparison
@ -133,9 +144,9 @@ class MPU6050Driver : public Usermod {
// 1 = initial memory load failed
// 2 = DMP configuration updates failed
// (if it's going to break, usually the code will be 1)
Serial.print(F("DMP Initialization failed (code "));
Serial.print(devStatus);
Serial.println(F(")"));
DEBUG_PRINT(F("DMP Initialization failed (code "));
DEBUG_PRINT(devStatus);
DEBUG_PRINTLN(F(")"));
}
}
@ -144,7 +155,7 @@ class MPU6050Driver : public Usermod {
* Use it to initialize network interfaces
*/
void connected() {
//Serial.println("Connected to WiFi!");
//DEBUG_PRINTLN("Connected to WiFi!");
}
@ -153,7 +164,7 @@ class MPU6050Driver : public Usermod {
*/
void loop() {
// if programming failed, don't try to do anything
if (!dmpReady) return;
if (!enabled || !dmpReady || strip.isUpdating()) return;
// wait for MPU interrupt or extra packet(s) available
if (!mpuInterrupt && fifoCount < packetSize) return;
@ -169,7 +180,7 @@ class MPU6050Driver : public Usermod {
if ((mpuIntStatus & 0x10) || fifoCount == 1024) {
// reset so we can continue cleanly
mpu.resetFIFO();
Serial.println(F("FIFO overflow!"));
DEBUG_PRINTLN(F("FIFO overflow!"));
// otherwise, check for DMP data ready interrupt (this should happen frequently)
} else if (mpuIntStatus & 0x02) {
@ -259,10 +270,23 @@ class MPU6050Driver : public Usermod {
*/
void readFromJsonState(JsonObject& root)
{
//if (root["bri"] == 255) Serial.println(F("Don't burn down your garage!"));
//if (root["bri"] == 255) DEBUG_PRINTLN(F("Don't burn down your garage!"));
}
/*
* addToConfig() can be used to add custom persistent settings to the cfg.json file in the "um" (usermod) object.
* It will be called by WLED when settings are actually saved (for example, LED settings are saved)
* I highly recommend checking out the basics of ArduinoJson serialization and deserialization in order to use custom settings!
*/
void addToConfig(JsonObject& root)
{
JsonObject top = root.createNestedObject("MPU6050_IMU");
JsonArray pins = top.createNestedArray("pin");
pins.add(HW_PIN_SCL);
pins.add(HW_PIN_SDA);
}
/*
* getId() allows you to optionally give your V2 usermod an unique ID (please define it in const.h!).
*/

33
usermods/multi_relay/readme.md
View File

@ -5,31 +5,35 @@ This usermod-v2 modification allows the connection of multiple relays each with
## HTTP API
All responses are returned as JSON.
Status Request: `http://[device-ip]/relays`
Switch Command: `http://[device-ip]/relays?switch=1,0,1,1`
* Status Request: `http://[device-ip]/relays`
* Switch Command: `http://[device-ip]/relays?switch=1,0,1,1`
The number of numbers behind the switch parameter must correspond to the number of relays. The number 1 switches the relay on. The number 0 switches the relay off.
Toggle Command: `http://[device-ip]/relays?toggle=1,0,1,1`
* Toggle Command: `http://[device-ip]/relays?toggle=1,0,1,1`
The number of numbers behind the parameter switch must correspond to the number of relays. The number 1 causes a toggling of the relay. The number 0 leaves the state of the device.
Examples
1. 4 relays at all, relay 2 will be toggled: `http://[device-ip]/relays?toggle=0,1,0,0`
2. 3 relays at all, relay 1&3 will be switched on: `http://[device-ip]/relays?switch=1,0,1`
1. total of 4 relays, relay 2 will be toggled: `http://[device-ip]/relays?toggle=0,1,0,0`
2. total of 3 relays, relay 1&3 will be switched on: `http://[device-ip]/relays?switch=1,0,1`
## JSON API
You can switch relay state using the following JSON object transmitted to: `http://[device-ip]/json`
Switch relay 0 on: `{"MultiRelay":{"relay":0,"on":true}}`
Switch relay4 3 & 4 off: `{"MultiRelay":[{"relay":2,"on":false},{"relay":3,"on":false}]}`
## MQTT API
wled/deviceMAC/relay/0/command on|off|toggle
wled/deviceMAC/relay/1/command on|off|toggle
* `wled`/_deviceMAC_/`relay`/`0`/`command` `on`|`off`|`toggle`
* `wled`/_deviceMAC_/`relay`/`1`/`command` `on`|`off`|`toggle`
When relay is switched it will publish a message:
wled/deviceMAC/relay/0 on|off
* `wled`/_deviceMAC_/`relay`/`0` `on`|`off`
## Usermod installation
@ -76,10 +80,21 @@ void registerUsermods()
Usermod can be configured in Usermods settings page.
* `enabled` - enable/disable usermod
* `pin` - GPIO pin where relay is attached to ESP
* `delay-s` - delay in seconds after on/off command is received
* `active-high` - toggle high/low activation of relay (can be used to reverse relay states)
* `external` - if enabled WLED does not control relay, it can only be triggered by external command (MQTT, HTTP, JSON or button)
* `button` - button (from LED Settings) that controls this relay
If there is no MultiRelay section, just save current configuration and re-open Usermods settings page.
Have fun - @blazoncek
## Change log
2021-04
* First implementation.
* First implementation.
2021-11
* Added information about dynamic configuration options
* Added button support.

477
usermods/usermod_v2_four_line_display_ALT/4LD_wled_fonts.c Normal file
View File

@ -0,0 +1,477 @@
#pragma once
//WLED custom fonts, curtesy of @Benji (https://github.com/Proto-molecule)
/*
Fontname: wled_logo_akemi_4x4
Copyright: Benji (https://github.com/proto-molecule)
Glyphs: 3/3
BBX Build Mode: 3
* this logo ...WLED/images/wled_logo_akemi.png
* encode map = 1, 2, 3
*/
const uint8_t u8x8_wled_logo_akemi_4x4[388] U8X8_FONT_SECTION("u8x8_wled_logo_akemi_4x4") =
"\1\3\4\4\0\0\0\0\0\0\0\0\0\340\360\10\350\10\350\210\270\210\350\210\270\350\10\360\340\0\0\0"
"\0\0\200\200\0\0@\340\300\340@\0\0\377\377\377\377\377\377\37\37\207\207\371\371\371\377\377\377\0\0\374"
"\374\7\7\371\0\0\6\4\15\34x\340\200\177\177\377\351yy\376\356\357\217\177\177\177o\377\377\0\70\77"
"\277\376~\71\0\0\0\0\0\0\0\1\3\3\3\1\0\0\37\77\353\365\77\37\0\0\0\0\5\7\2\3"
"\7\4\0\0\300\300\300\300\200\200\200\0\0\0\0\0\0\0\200\200\300\300\300\300\200\200\0\0\0\0\0\0"
"\0\200\200\300\371\37\37\371\371\7\7\377\374\0\0\0\374\377\377\37\37\341\341\377\377\377\377\374\0\0\0\374"
"\377\7\7\231\371\376>\371\371>~\377\277\70\0\270\377\177\77\376\376\71\371\371\71\177\377\277\70\0\70\377"
"\177>\376\371\377\377\0\77\77\0\0\4\7\2\7\5\0\0\0\377\377\0\77\77\0\0\0\5\7\2\7\5"
"\0\0\377\377\300\300\300\200\200\0\0\0\0\0\0\0\200\200\300\300\300\300\300\200\200\0\0\0\0\0\0\0"
"\0\0\0\0\231\231\231\371\377\377\374\0\0\0\374\377\347\347\371\1\1\371\371\7\7\377\374\0\0\0@\340"
"\300\340@\0\71\371\371\71\177\377\277\70\0\70\277\377\177\71\371\370\70\371\371~\376\377\77\70\200\340x\34"
"\15\4\6\0\0\77\77\0\0\0\5\7\2\7\5\0\0\0\377\377\0\77\77\0\0\1\3\3\1\1\0\0"
"\0\0\0";
/*
Fontname: wled_logo_akemi_5x5
Copyright: Benji (https://github.com/proto-molecule)
Glyphs: 3/3
BBX Build Mode: 3
* this logo ...WLED/images/wled_logo_akemi.png
* encoded = 1, 2, 3
*/
/*
const uint8_t u8x8_wled_logo_akemi_5x5[604] U8X8_FONT_SECTION("u8x8_wled_logo_akemi_5x5") =
"\1\3\5\5\0\0\0\0\0\0\0\0\0\0\0\0\340\340\374\14\354\14\354\14|\14\354\14||\14\354"
"\14\374\340\340\0\0\0\0\0\0\0\200\0\0\0\200\200\0\200\200\0\0\0\0\377\377\377\376\377\376\377\377"
"\377\377\77\77\307\307\307\307\306\377\377\377\0\0\0\360\374>\77\307\0\0\61cg\357\347\303\301\200\0\0"
"\377\377\377\317\317\317\317\360\360\360\374\374\377\377\377\377\377\377\377\377\0\0\200\377\377\340\340\37\0\0\0\0"
"\0\0\1\3\17\77\374\360\357\357\177\36\14\17\357\377\376\376>\376\360\357\17\17\14>\177o\340\300\343c"
"{\77\17\3\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\17\37\37\362\375\37\37\17\0\0"
"\0\0\1\1\1\0\1\1\1\0\0\0\200\300\300\300\300\200\200\0\0\0\0\0\0\0\0\0\0\0\200\200"
"\300\300\300\300\200\200\0\0\0\0\0\0\0\0\0\0\0\0\200\200\307\307\377\377\307\307\307\77>\374\360\0"
"\0\0\360\374\376\377\377\377\7\7\7\377\377\377\377\376\374\360\0\0\0\0\360\374\36\37\37\343\37\37\340\340"
"\37\37\37\340\340\377\377\200\0\200\377\377\377\340\340\340\37\37\37\37\37\37\37\377\377\377\200\0\0\200\377\377"
"\340\340\340\34\377\377\3\3\377\377\3\17\77{\343\303\300\303\343s\77\37\3\377\377\3\3\377\377\3\17\77"
"{\343\303\300\300\343{\37\17\3\377\377\377\377\0\0\37\37\0\0\1\1\1\1\0\1\1\1\1\0\0\377"
"\377\0\0\37\37\0\0\1\1\1\1\0\0\1\1\1\0\0\377\377\300\300\300\200\200\0\0\0\0\0\0\0"
"\0\0\0\0\200\200\300\300\300\300\200\200\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\343\343\343\343"
"\343\377\376\374\360\0\0\0\360\374\376\77\77\307\307\7\7\307\307\307\77>\374\360\0\0\0\0\0\200\200\0"
"\200\200\0\0\34\34\34\37\37\377\377\377\377\200\0\200\377\377\377\377\37\37\37\0\0\37\37\37\340\340\377\377"
"\200\0\0\0\1\303\347\357gc\61\0\3\3\377\377\3\7\37\177s\343\300\303s{\37\17\7\3\377\377"
"\3\3\377\377\3\37\77scp<\36\17\3\1\0\0\0\0\0\0\0\37\37\0\0\0\1\1\1\0\1"
"\1\1\0\0\0\0\377\377\0\0\37\37\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0";
*/
/*
Fontname: wled_logo_2x2
Copyright: Benji (https://github.com/proto-molecule)
Glyphs: 4/4
BBX Build Mode: 3
* this logo https://cdn.discordapp.com/attachments/706623245935444088/927361780613799956/wled_scaled.png
* encode map = 1, 2, 3, 4
*/
const uint8_t u8x8_wled_logo_2x2[133] U8X8_FONT_SECTION("u8x8_wled_logo_2x2") =
"\1\4\2\2\0\0\0\0\0\200\200\360\360\16\16\16\16\0\0\0\340\340\340\340\340\37\37\1\1\0\0\0"
"\0\0\0\0\360\360\16\16\16\200\200\16\16\16\360\360\0\0\0\200\37\37\340\340\340\37\37\340\340\340\37\37"
"\0\0\0\37\200~~\0\0\0\0\0\0\0\360\360\216\216\216\216\37\340\340\340\340\340\340\340\0\0\37\37"
"\343\343\343\343\16\16\0\0ppp\16\16\376\376\16\16\16\360\360\340\340\0\0\0\0\0\340\340\377\377\340"
"\340\340\37\37";
/*
Fontname: wled_logo_4x4
Copyright: Created with Fony 1.4.7
Glyphs: 4/4
BBX Build Mode: 3
* this logo https://cdn.discordapp.com/attachments/706623245935444088/927361780613799956/wled_scaled.png
* encode map = 1, 2, 3, 4
*/
/*
const uint8_t u8x8_wled_logo_4x4[517] U8X8_FONT_SECTION("u8x8_wled_logo_4x4") =
"\1\4\4\4\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\374\374\374\374\374\374\374\374\374"
"\0\0\0\0\0\0\0\0\0\0\0\0\0\300\300\300\300\300\377\377\377\377\377\0\0\0\0\0\0\0\0\0"
"\0\0\0\0\0\0\0\0\0\0\0\0\0\377\377\377\377\377\17\17\17\17\17\0\0\0\0\0\0\0\0\0"
"\0\0\0\0\370\370\370\370\370\370\370\370\370\7\7\7\7\7\0\0\0\0\0\0\0\0\0\0\0\0\0\0"
"\0\0\0\0\0\0\0\0\0\0\374\374\374\374\374\0\0\0\0\0\374\374\374\374\374\0\0\0\0\0\0\0"
"\0\0\0\0\0\377\377\377\377\377\0\0\0\0\0\300\300\300\300\300\0\0\0\0\0\377\377\377\377\377\0\0"
"\0\0\300\300\0\377\377\377\377\377\0\0\0\0\0\377\377\377\377\377\0\0\0\0\0\377\377\377\377\377\0\0"
"\0\0\377\377\0\7\7\7\7\7\370\370\370\370\370\7\7\7\7\7\370\370\370\370\370\7\7\7\7\7\0\0"
"\0\0\7\7\0\0\0\374\374\374\374\374\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\374\374\374"
"\374\374\374\374\300\300\300\77\77\77\77\77\0\0\0\0\0\0\0\0\0\0\0\0\377\377\377\377\377\300\300\300"
"\300\300\300\300\377\377\377\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\377\377\377\377\377\37\37\37"
"\37\37\37\37\7\7\7\370\370\370\370\370\370\370\370\370\370\370\370\370\0\0\0\0\7\7\7\7\7\370\370\370"
"\370\370\370\370\374\374\374\374\374\374\0\0\0\0\0\0\0\0\374\374\374\374\374\374\374\374\374\374\374\374\374\374"
"\0\0\0\0\300\300\0\0\0\0\0\0\0\77\77\77\77\77\0\0\0\0\377\377\377\377\377\0\0\0\0\377"
"\377\377\377\377\37\37\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\377\377\377\377\377\0\0\0\0\377"
"\377\377\377\377\370\370\370\370\370\370\0\0\0\0\0\0\0\0\370\370\370\370\377\377\377\377\377\370\370\370\370\377"
"\7\7\7\7";
*/
/*
Fontname: 4LineDisplay_WLED_icons_1x
Copyright: Benji (https://github.com/proto-molecule)
Glyphs: 13/13
BBX Build Mode: 3
* 1 = sun
* 2 = skip forward
* 3 = fire
* 4 = custom palette
* 5 = puzzle piece
* 6 = moon
* 7 = brush
* 8 = contrast
* 9 = power-standby
* 10 = star
* 11 = heart
* 12 = Akemi
*-----------
* 20 = wifi
* 21 = media-play
*/
const uint8_t u8x8_4LineDisplay_WLED_icons_1x1[172] U8X8_FONT_SECTION("u8x8_4LineDisplay_WLED_icons_1x1") =
"\1\25\1\1\0B\30<<\30B\0~<\30\0~<\30\0p\374\77\216\340\370\360\0<n\372\377"
"\275\277\26\34\374\374\77\77\374\374\60\60<~~\360\340``\0\200\340\360p\14\16\6\1<~\377\377"
"\201\201B<\70D\200\217\200D\70\0\0\10x<<x\10\0\14\36>||>\36\14\64 \336\67"
";\336 \64\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\2\1\11\311"
"\311\1\2\0\0~<<\30\30\0";
/*
Fontname: 4LineDisplay_WLED_icons_2x1
Copyright: Benji (https://github.com/proto-molecule)
Glyphs: 11/11
BBX Build Mode: 3
* 1 = sun
* 2 = skip forward
* 3 = fire
* 4 = custom palette
* 5 = puzzle piece
* 6 = moon
* 7 = brush
* 8 = contrast
* 9 = power-standby
* 10 = star
* 11 = heart
* 12 = Akemi
*/
const uint8_t u8x8_4LineDisplay_WLED_icons_2x1[196] U8X8_FONT_SECTION("u8x8_4LineDisplay_WLED_icons_2x1") =
"\1\14\2\1\20\20BB\30\30<\275\275<\30\30BB\20\20\377~<<\70\30\20\0\377~<<"
"\70\30\20\0\60p\370\374\77>\236\214\300\340\370\360\360\340\0\0\34<v\326\336\375\375\377\277\275=>"
"\66\66<\34\374\374\374\374~\77\77~\374\374\374\374 pp \30<~~\377\370\360\360\340\340\340\340"
"@@ \0\200\300\340\360\360p`\10\34\34\16\6\6\3\0\0\70|~\376\376\377\377\377\201\201\203\202"
"\302Fl\70\70xL\204\200\200\217\217\200\200\204Lx\70\0\0\10\10\30\330x|\77\77|x\330\30"
"\10\10\0\0\14\36\37\77\77\177~\374\374~\177\77\77\37\36\14\24\64 \60>\26\367\33\375\36>\60"
" \64\24";
/*
Fontname: 4LineDisplay_WLED_icons_2x
Copyright:
Glyphs: 11/11
BBX Build Mode: 3
* 1 = sun
* 2 = skip forward
* 3 = fire
* 4 = custom palette
* 5 = puzzle piece
* 6 = moon
* 7 = brush
* 8 = contrast
* 9 = power-standby
* 10 = star
* 11 = heart
* 12 = Akemi
*/
const uint8_t u8x8_4LineDisplay_WLED_icons_2x2[389] U8X8_FONT_SECTION("u8x8_4LineDisplay_WLED_icons_2x2") =
"\1\14\2\2\200\200\14\14\300\340\360\363\363\360\340\300\14\14\200\200\1\1\60\60\3\7\17\317\317\17\7\3"
"\60\60\1\1\374\370\360\340\340\300\200\0\374\370\360\340\340\300\200\0\77\37\17\7\7\3\1\0\77\37\17\7"
"\7\3\1\0\0\200\340\360\377\376\374\360\0\0\300\200\0\0\0\0\17\77\177\377\17\7\301\340\370\374\377\377"
"\377|\0\0\360\370\234\236\376\363\363\377\377\363\363\376><\370\360\3\17\77yy\377\377\377\377\317\17\17"
"\17\17\7\3\360\360\360\360\366\377\377\366\360\360\360\360\0\0\0\0\377\377\377\377\237\17\17\237\377\377\377\377"
"\6\17\17\6\340\370\374\376\377\340\200\0\0\0\0\0\0\0\0\0\3\17\37\77\177\177\177\377\376|||"
"\70\30\14\0\0\0\0\0\0\0\0``\360\370|<\36\7\2\0\300\360\376\377\177\77\36\0\1\1\0"
"\0\0\0\0\340\370\374\376\376\377\377\377\3\3\7\6\16<\370\340\7\37\77\177\177\377\377\377\300\300\340`"
"p<\37\7\300\340p\30\0\0\377\377\0\0\30p\340\300\0\0\17\37\70`\340\300\300\300\300\340`\70"
"\37\17\0\0\0@\300\300\300\300\340\374\374\340\300\300\300\300@\0\0\0\0\1s\77\37\17\17\37\77s"
"\1\0\0\0\360\370\374\374\374\374\370\360\360\370\374\374\374\374\370\360\0\1\3\7\17\37\77\177\177\77\37\17"
"\7\3\1\0\200\200\0\0\0\360\370\374<\334\330\360\0\0\200\200\2\2\14\30\24\37\6~\7\177\7\37"
"\24\30\16\2";
/*
Fontname: 4LineDisplay_WLED_icons_3x
Copyright: Benji (https://github.com/proto-molecule)
Glyphs: 11/11
BBX Build Mode: 3
* 1 = sun
* 2 = skip forward
* 3 = fire
* 4 = custom palette
* 5 = puzzle piece
* 6 = moon
* 7 = brush
* 8 = contrast
* 9 = power-standby
* 10 = star
* 11 = heart
* 12 = Akemi
*/
const uint8_t u8x8_4LineDisplay_WLED_icons_3x3[868] U8X8_FONT_SECTION("u8x8_4LineDisplay_WLED_icons_3x3") =
"\1\14\3\3\0\0\34\34\34\0\200\300\300\340\347\347\347\340\300\300\200\0\34\34\34\0\0\0\34\34\34\0"
"\0>\377\377\377\377\377\377\377\377\377\377\377>\0\0\34\34\34\0\0\0\16\16\16\0\0\1\1\3ss"
"s\3\1\1\0\0\34\34\34\0\0\0\370\360\340\300\300\200\0\0\0\0\0\0\370\360\340\300\300\200\0\0"
"\0\0\0\0\377\377\377\377\377\377\377\376~<\70\20\377\377\377\377\377\377\377\376~<\70\20\37\17\17\7"
"\3\1\1\0\0\0\0\0\37\17\17\7\3\1\1\0\0\0\0\0\0\0\0\0\0\300\361\376\374\370\360\300"
"\0\0\0\0\0\0\0\0\0\0\0\0\300\370\374\376\377\377\377\377\377\177\77\17\6\0\200\342\374\370\360\340"
"\200\0\0\0\1\17\37\77\177\377\7\3\0\200\360\370\374\376\377\377\377\377\377\377\77\0\0\0\0\200\340\360"
"\370\370\374\316\206\206\317\377\377\377\317\206\206\316\374\374\370\360\340\200<\377\377\371\360py\377\377\377\377\377"
"\377\377\377\377\377\377\363\341\341\363\377\177\0\1\7\17\34\70x|\377\377\377\377\367\363c\3\3\3\3\1"
"\1\1\0\0\300\300\300\300\300\300\300\316\377\377\377\316\300\300\300\300\300\300\0\0\0\0\0\0\377\377\377\377"
"\377\377\377\377\377\377\377\377\377\377\377\377\377\377\300\300\340\340\340\300\377\377\377\377\377\377\377\307\3\3\3\307"
"\377\377\377\377\377\377\1\1\3\3\3\1\0\300\340\370\374\374\376\377\0\0\0\0\0\0\0\0\0\0\0\0"
"\0\0\0\0>\377\377\377\377\377\377\377\377\374\360\340\300\300\200\200\0\0\0\0\0\0\200\200\0\1\7\17"
"\37\37\77\177\177\177\177\377\377\377\177\177\177\77\77\37\17\7\3\0\0\0\0\0\0\0\0\0\0\0\0\0"
"\200\200\300\340\340\360\370\374|>\17\6\0\0\0\0\0\340\340\360\360\360\342\303\7\17\37\77\37\7\3\1"
"\0\0\0\0\0\200\340\360\377\377\377\377\177\77\37\17\0\0\0\0\0\0\0\0\0\0\0\0\0\200\340\360"
"\370\374\374\376\376\376\377\377\7\7\7\6\16\16\34\70\360\340\300\0|\377\377\377\377\377\377\377\377\377\377\377"
"\0\0\0\0\0\0\0\0\0\377\377\377\0\3\7\17\37\77\177\177\377\377\377\377\340\340\340\340pp\70<"
"\37\17\3\0\0\0\200\300\340\340\300\0\0\377\377\377\0\0\300\340\340\300\200\0\0\0\0\0\370\376\377\17"
"\3\0\0\0\0\17\17\17\0\0\0\0\0\3\17\377\376\370\0\0\0\7\17\37<xp\340\340\340\340\340"
"\340\340\340px<\37\17\3\0\0\0\0\0\0\0\0\0\0\0\0\0\300\370\376\370\200\0\0\0\0\0"
"\0\0\0\0\0\2\6\16\36\36>~\376\376\377\377\377\377\377\376\376~>\36\16\6\6\2\0\0\0\0"
"\0\300x<\37\17\17\7\3\7\17\17\37<x\300\0\0\0\0\200\300\340\360\360\370\370\370\360\360\340\300"
"\200\300\340\360\360\370\370\370\360\360\340\200\17\37\77\177\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377"
"\177\77\37\17\0\0\0\0\0\1\3\7\17\37\77\177\177\77\37\17\7\3\1\0\0\0\0\0\0\0\0\0"
"\0\0\0\200\300\340\360\370\370\370p`\300\200\0\0\0\0\0\0&,f\300\0\0\300\377\377\357\357\357"
"\363\370\377\377\377\377\300\0\0\306l&\0\0\0\1\7\16\14\6\7\1\177\177\0\177\177\1\7\6\14\16"
"\7\1\0";
/*
Fontname: 4LineDisplay_WLED_icons_4x
Copyright: Benji (https://github.com/proto-molecule)
Glyphs: 11/11
BBX Build Mode: 3
* 1 = sun
* 2 = skip forward
* 3 = fire
* 4 = custom palette
* 5 = puzzle piece
* 6 = moon
* 7 = brush
* 8 = contrast
* 9 = power-standby
* 10 = star
* 11 = heart
* 12 = Akemi
*/
/*
const uint8_t u8x8_4LineDisplay_WLED_icons_4x4[1540] U8X8_FONT_SECTION("u8x8_4LineDisplay_WLED_icons_4x4") =
"\1\14\4\4\0\0\0\0`\360\360`\0\0\0\0\0\0\6\17\17\6\0\0\0\0\0\0`\360\360`"
"\0\0\0\0\200\300\300\200\0\0\0\0\340\370\374\376\376\377\377\377\377\377\377\376\376\374\370\340\0\0\0\0"
"\200\300\300\200\1\3\3\1\0\0\0\0\7\37\77\177\177\377\377\377\377\377\377\177\177\77\37\7\0\0\0\0"
"\1\3\3\1\0\0\0\0\6\17\17\6\0\0\0\0\0\0`\360\360`\0\0\0\0\0\0\6\17\17\6"
"\0\0\0\0\360\340\300\200\200\0\0\0\0\0\0\0\0\0\0\0\360\340\300\200\200\0\0\0\0\0\0\0"
"\0\0\0\0\377\377\377\377\377\377\376\374\374\370\360\340\340\300\200\0\377\377\377\377\377\377\376\374\374\370\360\340"
"\340\300\200\0\377\377\377\377\377\377\177\77\77\37\17\7\7\3\1\0\377\377\377\377\377\377\177\77\77\37\17\7"
"\7\3\1\0\17\7\3\1\1\0\0\0\0\0\0\0\0\0\0\0\17\7\3\1\1\0\0\0\0\0\0\0"
"\0\0\0\0\0\0\0\0\0\0\0\200\341\376\374\370\360\340\300\0\0\0\0\0\0\0\0\0\0\0\0\0"
"\0\0\0\0\0\200\300\360\370\374\376\377\377\377\377\377\377\377\377~\0\0\0\0\20\340\300\200\0\0\0\0"
"\0\0\0\0~\377\377\377\377\377\377\377\377\177\77\37\17\3\1\0\200\300\340\370\376\377\377\377\377\376\374\340"
"\0\0\0\0\0\3\7\17\37\77\177\207\1\0\0\0\340\370\374\377\377\377\377\377\377\377\377\377\377\177\77\17"
"\0\0\0\0\0\0\0\200\300\360\370\370\374\34\16\16\16\36\377\377\377\377\37\16\16\16\36\374\374\370\370\360"
"\340\300\0\0\340\374\377\377\217\7\7\7\217\377\376\376\376\377\377\377\377\377\377\376\376\376\377\377\217\7\7\7"
"\217\377\377\374\17\177\377\377\377\37\17\17\17\37\377\377\377\377\377\377\377\377\377\377\377\377\177\177\177\177\77\77"
"\77\37\17\7\0\0\0\3\7\17\36>>\177\177\377\377\377\377\377\377\371p\60\0\0\0\0\0\0\0\0"
"\0\0\0\0\0\0\0\0\0\0\0\0<\376\377\377\377\377\376<\0\0\0\0\0\0\0\0\0\0\0\0"
"\0\0\0\0\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\0\0\0\0"
"\0\0\0\0\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377~~\377\377"
"\377\377~<\377\377\377\377\377\377\377\377\303\1\0\0\0\0\1\303\377\377\377\377\377\377\377\377\0\0\0\0"
"\0\0\0\0\0\0\200\340\360\370\374\374\376\376\1\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"
"\0\0\0\0\370\377\377\377\377\377\377\377\377\377\376\360\300\200\0\0\0\0\0\0\0\0\0\0\0\0\0\0"
"\0\0\0\0\7\77\377\377\377\377\377\377\377\377\377\377\377\377\377\376\374\370\370\360\360\360\340\340\340\340\340\340"
"\340\340\60\0\0\0\0\1\3\7\17\37\37\77\77\77\177\177\177\177\177\177\177\177\77\77\77\37\37\17\7\3"
"\1\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\200\200\300\340\340\360\370\374\374"
"~\77\16\4\0\0\0\0\0\0\0\0\0\0\0\0\0\0\30\34>~\377\377\377\377\177\77\37\7\3\0"
"\0\0\0\0\0\0\0\0\0\360\374\376\377\377\377\377\377\376\374\370\0\0\0\3\3\1\0\0\0\0\0\0"
"\0\0\0\0@@\340\370\374\377\377\377\177\177\177\77\37\17\7\1\0\0\0\0\0\0\0\0\0\0\0\0"
"\0\0\0\0\0\0\200\300\340\360\370\374\374\376\376\376\377\377\377\377\17\17\17\37\36\36>|\374\370\360\340"
"\300\200\0\0\360\376\377\377\377\377\377\377\377\377\377\377\377\377\377\377\0\0\0\0\0\0\0\0\0\1\3\37"
"\377\377\376\360\17\177\377\377\377\377\377\377\377\377\377\377\377\377\377\377\0\0\0\0\0\0\0\0\0\200\300\370"
"\377\377\177\17\0\0\1\3\7\17\37\77\77\177\177\177\377\377\377\377\360\360\360\370xx|>\77\37\17\7"
"\3\1\0\0\0\0\0\0\0\200\300\200\0\0\0\0\377\377\377\377\0\0\0\0\200\300\200\0\0\0\0\0"
"\0\0\0\0\300\360\374\376\177\37\7\3\3\0\0\0\377\377\377\377\0\0\0\3\3\7\37\177\376\374\360\300"
"\0\0\0\0\77\377\377\377\340\200\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\200\340\377\377\377\77"
"\0\0\0\0\0\0\3\7\17\37><|x\370\360\360\360\360\360\360\370x|<>\37\17\7\3\0\0"
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\340\374\374\340\0\0\0\0\0\0\0\0\0\0"
"\0\0\0\0\0\20\60p\360\360\360\360\360\360\360\360\370\377\377\377\377\377\377\370\360\360\360\360\360\360\360\360"
"p\60\20\0\0\0\0\0\0\0\1\3\7\317\377\377\377\377\377\377\377\377\377\377\377\377\317\7\3\1\0\0"
"\0\0\0\0\0\0\0\0\0\0\0p>\37\17\17\7\3\1\0\0\1\3\7\17\17\37>p\0\0\0"
"\0\0\0\0\0\200\300\340\340\360\360\360\360\360\360\340\340\300\200\0\0\200\300\340\340\360\360\360\360\360\360\340"
"\340\300\200\0~\377\377\377\377\377\377\377\377\377\377\377\377\377\377\376\376\377\377\377\377\377\377\377\377\377\377\377"
"\377\377\377~\0\1\3\7\17\37\77\177\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\177\77\37\17"
"\7\3\1\0\0\0\0\0\0\0\0\0\0\1\3\7\17\37\77\177\177\77\37\17\7\3\1\0\0\0\0\0"
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\200\300\340\340\360\360\360\360\340\340\300\200\0\0\0\0\0\0"
"\0\0\0\0\0@\340\300\340@\0\0\0\376\377\377\177\177\177\237\207\347\371\371\371\377\376\0\0\0\0@"
"\340\300\340@\2\4\4\35x\340\200\0\30\237\377\177\36\376\376\37\37\377\377\37\177\377\237\30\0\200\340x"
"\34\5\4\2\0\0\0\0\0\1\3\3\3\1\0\0\0\17\17\0\0\17\17\0\0\0\1\3\3\3\1\0"
"\0\0\0";
*/
/*
Fontname: 4LineDisplay_WLED_icons_6x
Copyright: Benji (https://github.com/proto-molecule)
Glyphs: 11/11
BBX Build Mode: 3
* 1 = sun
* 2 = skip forward
* 3 = fire
* 4 = custom palette
* 5 = puzzle piece
* 6 = moon
* 7 = brush
* 8 = contrast
* 9 = power-standby
* 10 = star
* 11 = heart
* 12 = Akemi
*/
// you can replace this (wasteful) font by using 3x3 variant with draw2x2Glyph()
const uint8_t u8x8_4LineDisplay_WLED_icons_6x6[3460] U8X8_FONT_SECTION("u8x8_4LineDisplay_WLED_icons_6x6") =
"\1\14\6\6\0\0\0\0\0\0\200\300\300\300\300\200\0\0\0\0\0\0\0\0\0\36\77\77\77\77\36\0"
"\0\0\0\0\0\0\0\0\200\300\300\300\300\200\0\0\0\0\0\0\0\0\0\0\0\0\7\17\17\17\17\7"
"\0\0\0\0\200\300\340\340\340\360\360\360\360\360\360\340\340\340\300\200\0\0\0\0\7\17\17\17\17\7\0\0"
"\0\0\0\0\300\340\340\340\340\300\0\0\0\0\0\0\340\374\376\377\377\377\377\377\377\377\377\377\377\377\377\377"
"\377\377\377\377\377\376\374\340\0\0\0\0\0\0\300\340\340\340\340\300\3\7\7\7\7\3\0\0\0\0\0\0"
"\7\77\177\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\177\77\7\0\0\0\0\0\0\3\7"
"\7\7\7\3\0\0\0\0\0\0\340\360\360\360\360\340\0\0\0\0\1\3\7\7\7\17\17\17\17\17\17\7"
"\7\7\3\1\0\0\0\0\340\360\360\360\360\340\0\0\0\0\0\0\0\0\0\0\0\0\1\3\3\3\3\1"
"\0\0\0\0\0\0\0\0\0x\374\374\374\374x\0\0\0\0\0\0\0\0\0\1\3\3\3\3\1\0\0"
"\0\0\0\0\300\200\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\300\200\0\0"
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\377\377\377\376\376\374\370\360\360\340\300\200"
"\200\0\0\0\0\0\0\0\0\0\0\0\377\377\377\376\376\374\370\360\360\340\300\200\200\0\0\0\0\0\0\0"
"\0\0\0\0\377\377\377\377\377\377\377\377\377\377\377\377\377\377\376\374\374\370\360\340\340\300\200\0\377\377\377\377"
"\377\377\377\377\377\377\377\377\377\377\376\374\374\370\360\340\340\300\200\0\377\377\377\377\377\377\377\377\377\377\377\377"
"\377\377\177\77\77\37\17\7\7\3\1\0\377\377\377\377\377\377\377\377\377\377\377\377\377\377\177\77\77\37\17\7"
"\7\3\1\0\377\377\377\177\177\77\37\17\17\7\3\1\1\0\0\0\0\0\0\0\0\0\0\0\377\377\377\177"
"\177\77\37\17\17\7\3\1\1\0\0\0\0\0\0\0\0\0\0\0\3\1\0\0\0\0\0\0\0\0\0\0"
"\0\0\0\0\0\0\0\0\0\0\0\0\3\1\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\1\376\374\374\370\360\340\300\200\0\0\0\0\0\0\0"
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\200\340\360\374"
"\377\377\377\377\377\377\377\377\377\376\370\300\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"
"\0\0\0\0\0\0\300\340\360\374\376\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\37\0\0\0\0"
"\0\0\4\370\360\360\340\300\200\0\0\0\0\0\0\0\0\0\0\0\370\377\377\377\377\377\377\377\377\377\377\377"
"\377\377\377\377\377\177\77\37\7\3\0\0\0\0\0\200\300\360\374\377\377\377\377\377\377\377\376\370\340\0\0\0"
"\0\0\0\0\3\37\177\377\377\377\377\377\377\377\377\377\77\17\7\1\0\0\0\0\0\200\300\360\370\374\376\377"
"\377\377\377\377\377\377\377\377\377\377\377\377\377\377\0\0\0\0\0\0\0\0\0\1\3\7\17\37\77\77\177\200"
"\0\0\0\0\0\0\340\374\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\177\77\17\1\0\0"
"\0\0\0\0\0\0\0\0\0\0\0\200\300\340\340\360\360\370|<>>>~\377\377\377\377\377\377\377\177"
"\77\36\36\36\36<|\370\370\360\360\340\340\200\0\0\0\0\0\0\0\0\300\360\374\376\377\377\377\377\377\377"
"\377\360\340\300\300\300\300\340\360\377\377\377\377\377\377\370\360\340\340\340\340\360\370\377\377\377\377\377\377\377\377\377"
"\374\360\340\200\360\377\377\377\377\377\207\3\1\1\1\1\3\207\377\377\377\377\377\377\377\377\377\377\377\377\377\377"
"\377\377\377\377\377\377\377\207\3\1\1\1\1\3\207\377\377\377\377\377\17\377\377\377\377\377\377\377\376~>>"
"\77\77\177\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\376\376\376\376\377\377\377"
"\177\77\37\7\0\0\3\17\77\177\377\377\360\340\300\300\300\300\340\360\377\377\377\377\377\377\377\377\377\377\77\17"
"\17\7\7\7\7\7\7\7\7\7\3\3\3\3\1\0\0\0\0\0\0\0\0\0\0\0\0\1\3\7\17\37"
"\37\77\77\177\177\177\377\377\377\377\377\377\377\377\377~\30\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\370\374\376\377\377\377\377\377\377\376\374\360\0\0\0\0"
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\360\360\360\360\360\360\360\360\360\360\360\360"
"\360\363\377\377\377\377\377\377\377\377\363\360\360\360\360\360\360\360\360\360\360\360\360\360\0\0\0\0\0\0\0\0"
"\0\0\0\0\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377"
"\377\377\377\377\377\377\377\377\0\0\0\0\0\0\0\0\0\0\0\0\377\377\377\377\377\377\377\377\377\377\377\377"
"\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\374\374\376\376\377\377\377\377"
"\377\376\374\360\377\377\377\377\377\377\377\377\377\377\377\377\177\77\37\17\17\17\17\17\17\37\77\177\377\377\377\377"
"\377\377\377\377\377\377\377\377\3\3\7\7\17\17\17\17\7\7\3\0\377\377\377\377\377\377\377\377\377\377\377\377"
"\360\300\0\0\0\0\0\0\0\0\300\360\377\377\377\377\377\377\377\377\377\377\377\377\0\0\0\0\0\0\0\0"
"\0\0\0\0\0\0\0\0\0\200\300\340\360\360\370\374\374\376\376\7\0\0\0\0\0\0\0\0\0\0\0\0"
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\300\360\374\376\377\377\377\377\377\377\377"
"\377\377\377\340\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"
"\0\0\0\0\374\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\374\360\300\200\0\0\0\0\0\0\0"
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\17\177\377\377\377\377\377\377\377\377\377\377"
"\377\377\377\377\377\377\377\377\377\377\376\374\370\360\360\340\340\300\300\300\200\200\200\200\0\0\0\0\0\0\200\200"
"\200\200\0\0\0\0\1\7\37\77\177\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377"
"\377\377\377\377\377\377\377\377\377\377\377\377\377\177\77\37\7\1\0\0\0\0\0\0\0\0\0\0\1\3\3\7"
"\17\17\37\37\37\77\77\77\77\177\177\177\177\177\177\77\77\77\77\37\37\37\17\17\7\3\3\1\0\0\0\0"
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"
"\0\0\0\0\0\0\200\200\300\340\360\360\370\374\374\376\377~\34\10\0\0\0\0\0\0\0\0\0\0\0\0"
"\0\0\0\0\0\0\0\0\0\0\0\200\300\300\340\360\360\370\374\376\376\377\377\377\377\377\377\177\77\17\7\3"
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\4\6\17\17\37\77\177\377"
"\377\377\377\377\377\377\77\37\7\3\1\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\300\370\374\376"
"\376\377\377\377\377\377\377\376\376\374\370\340\0\0\0\0\3\17\7\3\1\0\0\0\0\0\0\0\0\0\0\0"
"\0\0\0\0\0\0\0\0\0\0\200\360\377\377\377\377\377\377\377\377\377\377\377\377\377\377\177\17\0\0\0\0"
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0`px\374\376\377\377\377\377\377\377"
"\177\177\177\77\77\37\17\7\3\1\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"
"\0\0\0\0\0\0\0\0\0\0\0\200\300\340\360\360\370\374\374\374\376\376\376\377\377\377\377\377\77\77\77\77"
"\177~~\376\374\374\374\370\360\360\340\300\200\0\0\0\0\0\0\0\0\0\340\360\374\376\377\377\377\377\377\377"
"\377\377\377\377\377\377\377\377\377\377\377\377\0\0\0\0\0\0\0\0\0\1\1\3\7\17\37\177\377\377\376\374"
"\360\340\0\0\370\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\0\0\0\0"
"\0\0\0\0\0\0\0\0\0\0\0\0\1\17\377\377\377\377\377\370\37\377\377\377\377\377\377\377\377\377\377\377"
"\377\377\377\377\377\377\377\377\377\377\377\377\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\200\360\377\377"
"\377\377\377\37\0\0\7\17\77\177\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\0\0\0\0"
"\0\0\0\0\0\200\200\300\340\360\370\376\377\377\177\77\17\7\0\0\0\0\0\0\0\0\0\1\3\7\17\17"
"\37\77\77\77\177\177\177\377\377\377\377\377\374\374\374\374\376~~\177\77\77\77\37\17\17\7\3\1\0\0\0"
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\377\377\377\377\377\377\0\0\0\0"
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\200\300\340\360\370\374\376\376|"
"x \0\0\0\0\377\377\377\377\377\377\0\0\0\0 x|\376\376\374\370\360\340\300\200\0\0\0\0\0"
"\0\0\0\0\300\370\376\377\377\377\177\17\7\1\0\0\0\0\0\0\0\0\377\377\377\377\377\377\0\0\0\0"
"\0\0\0\0\1\7\37\177\377\377\377\376\370\200\0\0\0\0\0\0\177\377\377\377\377\377\200\0\0\0\0\0"
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\200\377\377\377\377\377\177\0\0"
"\0\0\0\0\0\7\37\177\377\377\377\374\370\340\300\200\200\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"
"\0\200\200\300\340\370\374\377\377\377\177\37\7\0\0\0\0\0\0\0\0\0\0\0\0\1\3\7\17\37\37\77"
"\77\177~~~\374\374\374\374\374\374\374\374~~~\177\77\77\37\37\17\7\3\1\0\0\0\0\0\0\0"
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\340\374\374\340\0\0"
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"
"\0\0\0\0\0\0\0\300\370\377\377\377\377\377\377\370\300\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"
"\0\0\0\0\0\4\14\34<<|\374\374\374\374\374\374\374\374\374\374\374\376\377\377\377\377\377\377\377\377\377"
"\377\376\374\374\374\374\374\374\374\374\374\374\374|<<\34\14\4\0\0\0\0\0\0\0\0\0\1\3\3\7"
"\17\37\77\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\77\37\17\7\3\3\1\0\0\0\0"
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\300\370\377\377\377\377\377\377\177\77\37\17\17\37\77\177"
"\377\377\377\377\377\377\370\300\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0p>"
"\37\17\17\7\3\1\0\0\0\0\0\0\0\0\0\0\0\0\1\3\7\17\17\37>p\0\0\0\0\0\0"
"\0\0\0\0\0\0\0\0\0\0\200\200\200\300\300\300\300\300\300\200\200\200\0\0\0\0\0\0\0\0\0\0"
"\0\0\200\200\200\300\300\300\300\300\300\200\200\200\0\0\0\0\0\0\200\360\370\374\376\377\377\377\377\377\377\377"
"\377\377\377\377\377\377\377\376\374\370\360\200\200\360\370\374\376\377\377\377\377\377\377\377\377\377\377\377\377\377\377\376"
"\374\370\360\200\37\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377"
"\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\37\0\0\1\3\7\17\37\77\177\377\377\377"
"\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\177\77\37\17\7"
"\3\1\0\0\0\0\0\0\0\0\0\0\0\0\1\3\7\17\37\77\177\377\377\377\377\377\377\377\377\377\377\377"
"\377\377\377\177\77\37\17\7\3\1\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"
"\0\0\0\0\0\0\1\3\7\17\37\77\77\37\17\7\3\1\0\0\0\0\0\0\0\0\0\0\0\0\0\0"
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\300\300\300\300\300\300\300"
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"
"\0\0\340\370\370\376\376\377\377\377\377\377\377\377\377\77\77\77>\376\370\370\340\0\0\0\0\0\0\0\0\0"
"\0\0\0\0\0 p\360\340\360p \0\0\0\0\0\0\377\377\377\377\177\177\177\177\177\207\207\340\340\377"
"\377\377\377\377\377\377\377\0\0\0\0\0 p\360\340\360p \0\6\4\14\14\15|x\360\200\200\0\0"
"pp\177\177\377\377\374|\374\374\374\177\177\177\377\377\377\177\377\377\377\377\177pp\0\0\200\200\360x}"
"\14\14\4\6\0\0\0\0\0\0\0\3\37\37|ppp\34\34\37\3\3\0\377\377\377\0\0\0\377\377"
"\377\0\3\3\37\37\34ppp~\37\37\3\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"
"\0\0\0\0\0\0\0\0\7\7\7\0\0\0\7\7\7\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"
"\0\0\0";
/*
Fontname: akemi_8x8
Copyright: Benji (https://github.com/proto-molecule)
Glyphs: 1/1
BBX Build Mode: 3
* 12 = Akemi
*/
/*
const uint8_t u8x8_akemi_8x8[516] U8X8_FONT_SECTION("u8x8_akemi_8x8") =
"\14\14\10\10\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"
"\200\200\200\200\200\200\200\200\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\340\340\370\370\376\376\376\376"
"\377\377\377\377\377\377\377\377\376\376\376\376\370\370\340\340\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\376\376\377\377\377\377\377\377\377\377"
"\377\377\377\377\37\37\37\343\343\343\343\343\343\377\377\377\376\376\0\0\0\0\0\0\0\0\0\0\0\0\0\0"
"\0\0\0\0\0\30\30~~\370\370~~\30\30\0\0\0\0\0\0\0\377\377\377\377\377\77\77\77\77\77"
"\77\300\300\300\370\370\370\377\377\377\377\377\377\377\377\377\377\377\0\0\0\0\0\0\0\30\0f\0\200\0\0"
"\0\0\0\0\6\6\30\30\30\31\371\370\370\340\340\0\0\0\0\0\340\340\377\377\377\377\377\376\376\376\376\376"
"\376\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\371\346\346\6\6\6\6\6\0\340\340\340\341\0\0"
"\0\0\0\0\0\0\0\0\0\0\1\1\37\37\377\376\376\340\340\200\201\201\341\341\177\177\37\37\1\1\377\377"
"\377\377\1\1\1\1\377\377\377\377\1\1\37\37\177\177\341\341\201\201\200\200\370\370\376\376\37\37\1\1\0\0"
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\1\1\7\7\7\7\7\7\1\1\0\0\0\0\0\0\377\377"
"\377\377\0\0\0\0\377\377\377\377\0\0\0\0\0\0\1\1\7\7\7\7\7\7\1\1\0\0\0\0\0\0"
"\0\0\0";
*/

1046
usermods/usermod_v2_four_line_display_ALT/usermod_v2_four_line_display_ALT.h
View File

File diff suppressed because it is too large Load Diff

784
usermods/usermod_v2_rotary_encoder_ui_ALT/usermod_v2_rotary_encoder_ui_ALT.h
View File

@ -19,17 +19,20 @@
// Change between modes by pressing a button.
//
// Dependencies
// * This usermod REQURES the ModeSortUsermod
// * This Usermod works best coupled with
// FourLineDisplayUsermod.
//
// If FourLineDisplayUsermod is used the folowing options are also inabled
// If FourLineDisplayUsermod is used the folowing options are also enabled
//
// * main color
// * saturation of main color
// * display network (long press buttion)
//
#ifdef USERMOD_MODE_SORT
#error "Usermod Mode Sort is no longer required. Remove -D USERMOD_MODE_SORT from platformio.ini"
#endif
#ifndef ENCODER_DT_PIN
#define ENCODER_DT_PIN 18
#endif
@ -44,27 +47,90 @@
// The last UI state, remove color and saturation option if diplay not active(too many options)
#ifdef USERMOD_FOUR_LINE_DISPLAY
#define LAST_UI_STATE 6
#define LAST_UI_STATE 8
#else
#define LAST_UI_STATE 4
#endif
// Number of modes at the start of the list to not sort
#define MODE_SORT_SKIP_COUNT 1
// Which list is being sorted
static char **listBeingSorted;
/**
* Modes and palettes are stored as strings that
* end in a quote character. Compare two of them.
* We are comparing directly within either
* JSON_mode_names or JSON_palette_names.
*/
static int re_qstringCmp(const void *ap, const void *bp) {
char *a = listBeingSorted[*((byte *)ap)];
char *b = listBeingSorted[*((byte *)bp)];
int i = 0;
do {
char aVal = pgm_read_byte_near(a + i);
if (aVal >= 97 && aVal <= 122) {
// Lowercase
aVal -= 32;
}
char bVal = pgm_read_byte_near(b + i);
if (bVal >= 97 && bVal <= 122) {
// Lowercase
bVal -= 32;
}
// Relly we shouldn't ever get to '\0'
if (aVal == '"' || bVal == '"' || aVal == '\0' || bVal == '\0') {
// We're done. one is a substring of the other
// or something happenend and the quote didn't stop us.
if (aVal == bVal) {
// Same value, probably shouldn't happen
// with this dataset
return 0;
}
else if (aVal == '"' || aVal == '\0') {
return -1;
}
else {
return 1;
}
}
if (aVal == bVal) {
// Same characters. Move to the next.
i++;
continue;
}
// We're done
if (aVal < bVal) {
return -1;
}
else {
return 1;
}
} while (true);
// We shouldn't get here.
return 0;
}
class RotaryEncoderUIUsermod : public Usermod {
private:
int fadeAmount = 5; // Amount to change every step (brightness)
unsigned long currentTime;
int8_t fadeAmount = 5; // Amount to change every step (brightness)
unsigned long loopTime;
unsigned long buttonHoldTIme;
unsigned long buttonPressedTime = 0;
unsigned long buttonWaitTime = 0;
bool buttonPressedBefore = false;
bool buttonLongPressed = false;
int8_t pinA = ENCODER_DT_PIN; // DT from encoder
int8_t pinB = ENCODER_CLK_PIN; // CLK from encoder
int8_t pinC = ENCODER_SW_PIN; // SW from encoder
unsigned char select_state = 0; // 0: brightness, 1: effect, 2: effect speed
unsigned char button_state = HIGH;
unsigned char prev_button_state = HIGH;
bool networkShown = false;
uint16_t currentHue1 = 6425; // default reboot color
byte currentSat1 = 255;
unsigned char select_state = 0; // 0: brightness, 1: effect, 2: effect speed, ...
uint16_t currentHue1 = 16; // default boot color
byte currentSat1 = 255;
#ifdef USERMOD_FOUR_LINE_DISPLAY
FourLineDisplayUsermod *display;
@ -72,7 +138,16 @@ private:
void* display = nullptr;
#endif
// Pointers the start of the mode names within JSON_mode_names
char **modes_qstrings = nullptr;
// Array of mode indexes in alphabetical order.
byte *modes_alpha_indexes = nullptr;
// Pointers the start of the palette names within JSON_palette_names
char **palettes_qstrings = nullptr;
// Array of palette indexes in alphabetical order.
byte *palettes_alpha_indexes = nullptr;
unsigned char Enc_A;
@ -85,6 +160,14 @@ private:
uint8_t knownMode = 0;
uint8_t knownPalette = 0;
uint8_t currentCCT = 128;
bool isRgbw = false;
byte presetHigh = 0;
byte presetLow = 0;
bool applyToAll = true;
bool initDone = false;
bool enabled = true;
@ -94,14 +177,94 @@ private:
static const char _DT_pin[];
static const char _CLK_pin[];
static const char _SW_pin[];
static const char _presetHigh[];
static const char _presetLow[];
static const char _applyToAll[];
/**
* Sort the modes and palettes to the index arrays
* modes_alpha_indexes and palettes_alpha_indexes.
*/
void sortModesAndPalettes() {
modes_qstrings = re_findModeStrings(JSON_mode_names, strip.getModeCount());
modes_alpha_indexes = re_initIndexArray(strip.getModeCount());
re_sortModes(modes_qstrings, modes_alpha_indexes, strip.getModeCount(), MODE_SORT_SKIP_COUNT);
palettes_qstrings = re_findModeStrings(JSON_palette_names, strip.getPaletteCount());
palettes_alpha_indexes = re_initIndexArray(strip.getPaletteCount());
// How many palette names start with '*' and should not be sorted?
// (Also skipping the first one, 'Default').
int skipPaletteCount = 1;
while (pgm_read_byte_near(palettes_qstrings[skipPaletteCount++]) == '*') ;
re_sortModes(palettes_qstrings, palettes_alpha_indexes, strip.getPaletteCount(), skipPaletteCount);
}
byte *re_initIndexArray(int numModes) {
byte *indexes = (byte *)malloc(sizeof(byte) * numModes);
for (byte i = 0; i < numModes; i++) {
indexes[i] = i;
}
return indexes;
}
/**
* Return an array of mode or palette names from the JSON string.
* They don't end in '\0', they end in '"'.
*/
char **re_findModeStrings(const char json[], int numModes) {
char **modeStrings = (char **)malloc(sizeof(char *) * numModes);
uint8_t modeIndex = 0;
bool insideQuotes = false;
// advance past the mark for markLineNum that may exist.
char singleJsonSymbol;
// Find the mode name in JSON
bool complete = false;
for (size_t i = 0; i < strlen_P(json); i++) {
singleJsonSymbol = pgm_read_byte_near(json + i);
if (singleJsonSymbol == '\0') break;
switch (singleJsonSymbol) {
case '"':
insideQuotes = !insideQuotes;
if (insideQuotes) {
// We have a new mode or palette
modeStrings[modeIndex] = (char *)(json + i + 1);
}
break;
case '[':
break;
case ']':
if (!insideQuotes) complete = true;
break;
case ',':
if (!insideQuotes) modeIndex++;
default:
if (!insideQuotes) break;
}
if (complete) break;
}
return modeStrings;
}
/**
* Sort either the modes or the palettes using quicksort.
*/
void re_sortModes(char **modeNames, byte *indexes, int count, int numSkip) {
listBeingSorted = modeNames;
qsort(indexes + numSkip, count - numSkip, sizeof(byte), re_qstringCmp);
listBeingSorted = nullptr;
}
public:
/*
* setup() is called once at boot. WiFi is not yet connected at this point.
* You can use it to initialize variables, sensors or similar.
*/
* setup() is called once at boot. WiFi is not yet connected at this point.
* You can use it to initialize variables, sensors or similar.
*/
void setup()
{
DEBUG_PRINTLN(F("Usermod Rotary Encoder init."));
PinManagerPinType pins[3] = { { pinA, false }, { pinB, false }, { pinC, false } };
if (!pinManager.allocateMultiplePins(pins, 3, PinOwner::UM_RotaryEncoderUI)) {
// BUG: configuring this usermod with conflicting pins
@ -117,12 +280,17 @@ public:
pinMode(pinA, INPUT_PULLUP);
pinMode(pinB, INPUT_PULLUP);
pinMode(pinC, INPUT_PULLUP);
currentTime = millis();
loopTime = currentTime;
loopTime = millis();
ModeSortUsermod *modeSortUsermod = (ModeSortUsermod*) usermods.lookup(USERMOD_ID_MODE_SORT);
modes_alpha_indexes = modeSortUsermod->getModesAlphaIndexes();
palettes_alpha_indexes = modeSortUsermod->getPalettesAlphaIndexes();
for (uint8_t s = 0; s < busses.getNumBusses(); s++) {
Bus *bus = busses.getBus(s);
if (!bus || bus->getLength()==0) break;
isRgbw |= bus->isRgbw();
}
currentCCT = (approximateKelvinFromRGB(RGBW32(col[0], col[1], col[2], col[3])) - 1900) >> 5;
if (!initDone) sortModesAndPalettes();
#ifdef USERMOD_FOUR_LINE_DISPLAY
// This Usermod uses FourLineDisplayUsermod for the best experience.
@ -140,91 +308,87 @@ public:
}
/*
* connected() is called every time the WiFi is (re)connected
* Use it to initialize network interfaces
*/
* connected() is called every time the WiFi is (re)connected
* Use it to initialize network interfaces
*/
void connected()
{
//Serial.println("Connected to WiFi!");
}
/*
* loop() is called continuously. Here you can check for events, read sensors, etc.
*
* Tips:
* 1. You can use "if (WLED_CONNECTED)" to check for a successful network connection.
* Additionally, "if (WLED_MQTT_CONNECTED)" is available to check for a connection to an MQTT broker.
*
* 2. Try to avoid using the delay() function. NEVER use delays longer than 10 milliseconds.
* Instead, use a timer check as shown here.
*/
* loop() is called continuously. Here you can check for events, read sensors, etc.
*
* Tips:
* 1. You can use "if (WLED_CONNECTED)" to check for a successful network connection.
* Additionally, "if (WLED_MQTT_CONNECTED)" is available to check for a connection to an MQTT broker.
*
* 2. Try to avoid using the delay() function. NEVER use delays longer than 10 milliseconds.
* Instead, use a timer check as shown here.
*/
void loop()
{
currentTime = millis(); // get the current elapsed time
if (!enabled || strip.isUpdating()) return;
unsigned long currentTime = millis(); // get the current elapsed time
// Initialize effectCurrentIndex and effectPaletteIndex to
// current state. We do it here as (at least) effectCurrent
// is not yet initialized when setup is called.
if (!currentEffectAndPaletteInitialized) {
findCurrentEffectAndPalette();}
findCurrentEffectAndPalette();
}
if(modes_alpha_indexes[effectCurrentIndex] != effectCurrent
|| palettes_alpha_indexes[effectPaletteIndex] != effectPalette){
if (modes_alpha_indexes[effectCurrentIndex] != effectCurrent || palettes_alpha_indexes[effectPaletteIndex] != effectPalette) {
currentEffectAndPaletteInitialized = false;
}
}
if (currentTime >= (loopTime + 2)) // 2ms since last check of encoder = 500Hz
{
button_state = digitalRead(pinC);
if (prev_button_state != button_state)
{
if (button_state == HIGH && (millis()-buttonHoldTIme < 3000))
{
prev_button_state = button_state;
loopTime = currentTime; // Updates loopTime
char newState = select_state + 1;
if (newState > LAST_UI_STATE) newState = 0;
bool changedState = true;
if (display != nullptr) {
switch(newState) {
case 0:
changedState = changeState(" Brightness", 1, 0, 1);
break;
case 1:
changedState = changeState(" Speed", 1, 4, 2);
break;
case 2:
changedState = changeState(" Intensity", 1 ,8, 3);
break;
case 3:
changedState = changeState(" Color Palette", 2, 0, 4);
break;
case 4:
changedState = changeState(" Effect", 3, 0, 5);
break;
case 5:
changedState = changeState(" Main Color", 255, 255, 7);
break;
case 6:
changedState = changeState(" Saturation", 255, 255, 8);
break;
}
}
if (changedState) {
select_state = newState;
bool buttonPressed = !digitalRead(pinC); //0=pressed, 1=released
if (buttonPressed) {
if (!buttonPressedBefore) buttonPressedTime = currentTime;
buttonPressedBefore = true;
if (currentTime-buttonPressedTime > 3000) {
if (!buttonLongPressed) displayNetworkInfo(); //long press for network info
buttonLongPressed = true;
}
} else if (!buttonPressed && buttonPressedBefore) {
bool doublePress = buttonWaitTime;
buttonWaitTime = 0;
if (!buttonLongPressed) {
if (doublePress) {
toggleOnOff();
lampUdated();
} else {
buttonWaitTime = currentTime;
}
}
else
{
prev_button_state = button_state;
networkShown = false;
if(!prev_button_state)buttonHoldTIme = millis();
}
buttonLongPressed = false;
buttonPressedBefore = false;
}
if (buttonWaitTime && currentTime-buttonWaitTime>350 && !buttonPressedBefore) { //same speed as in button.cpp
buttonWaitTime = 0;
char newState = select_state + 1;
bool changedState = true;
if (newState > LAST_UI_STATE || (newState == 8 && presetHigh==0 && presetLow == 0)) newState = 0;
if (display != nullptr) {
switch (newState) {
case 0: changedState = changeState(PSTR("Brightness"), 1, 0, 1); break; //1 = sun
case 1: changedState = changeState(PSTR("Speed"), 1, 4, 2); break; //2 = skip forward
case 2: changedState = changeState(PSTR("Intensity"), 1, 8, 3); break; //3 = fire
case 3: changedState = changeState(PSTR("Color Palette"), 2, 0, 4); break; //4 = custom palette
case 4: changedState = changeState(PSTR("Effect"), 3, 0, 5); break; //5 = puzzle piece
case 5: changedState = changeState(PSTR("Main Color"), 255, 255, 7); break; //7 = brush
case 6: changedState = changeState(PSTR("Saturation"), 255, 255, 8); break; //8 = contrast
case 7: changedState = changeState(PSTR("CCT"), 255, 255, 10); break; //10 = star
case 8: changedState = changeState(PSTR("Preset"), 255, 255, 11); break; //11 = heart
}
}
if (changedState) select_state = newState;
}
if (!prev_button_state && (millis()-buttonHoldTIme > 3000) && !networkShown) displayNetworkInfo(); //long press for network info
Enc_A = digitalRead(pinA); // Read encoder pins
Enc_B = digitalRead(pinB);
@ -233,65 +397,39 @@ public:
if (Enc_B == LOW) //changes to LOW so that then encoder registers a change at the very end of a pulse
{ // B is high so clockwise
switch(select_state) {
case 0:
changeBrightness(true);
break;
case 1:
changeEffectSpeed(true);
break;
case 2:
changeEffectIntensity(true);
break;
case 3:
changePalette(true);
break;
case 4:
changeEffect(true);
break;
case 5:
changeHue(true);
break;
case 6:
changeSat(true);
break;
case 0: changeBrightness(true); break;
case 1: changeEffectSpeed(true); break;
case 2: changeEffectIntensity(true); break;
case 3: changePalette(true); break;
case 4: changeEffect(true); break;
case 5: changeHue(true); break;
case 6: changeSat(true); break;
case 7: changeCCT(true); break;
case 8: changePreset(true); break;
}
}
else if (Enc_B == HIGH)
{ // B is low so counter-clockwise
switch(select_state) {
case 0:
changeBrightness(false);
break;
case 1:
changeEffectSpeed(false);
break;
case 2:
changeEffectIntensity(false);
break;
case 3:
changePalette(false);
break;
case 4:
changeEffect(false);
break;
case 5:
changeHue(false);
break;
case 6:
changeSat(false);
break;
case 0: changeBrightness(false); break;
case 1: changeEffectSpeed(false); break;
case 2: changeEffectIntensity(false); break;
case 3: changePalette(false); break;
case 4: changeEffect(false); break;
case 5: changeHue(false); break;
case 6: changeSat(false); break;
case 7: changeCCT(false); break;
case 8: changePreset(false); break;
}
}
}
Enc_A_prev = Enc_A; // Store value of A for next time
loopTime = currentTime; // Updates loopTime
}
}
void displayNetworkInfo(){
void displayNetworkInfo() {
#ifdef USERMOD_FOUR_LINE_DISPLAY
display->networkOverlay(" NETWORK INFO", 15000);
networkShown = true;
display->networkOverlay(PSTR("NETWORK INFO"), 10000);
#endif
}
@ -313,180 +451,293 @@ public:
}
boolean changeState(const char *stateName, byte markedLine, byte markedCol, byte glyph) {
#ifdef USERMOD_FOUR_LINE_DISPLAY
if (display != nullptr) {
if (display->wakeDisplay()) {
// Throw away wake up input
return false;
}
display->overlay(stateName, 750, glyph);
display->setMarkLine(markedLine, markedCol);
}
#endif
return true;
#ifdef USERMOD_FOUR_LINE_DISPLAY
if (display != nullptr) {
if (display->wakeDisplay()) {
// Throw away wake up input
display->redraw(true);
return false;
}
display->overlay(stateName, 750, glyph);
display->setMarkLine(markedLine, markedCol);
}
#endif
return true;
}
void lampUdated() {
//bool fxChanged = strip.setEffectConfig(effectCurrent, effectSpeed, effectIntensity, effectPalette);
//call for notifier -> 0: init 1: direct change 2: button 3: notification 4: nightlight 5: other (No notification)
// 6: fx changed 7: hue 8: preset cycle 9: blynk 10: alexa
setValuesFromMainSeg(); //to make transition work on main segment
colorUpdated(CALL_MODE_DIRECT_CHANGE);
updateInterfaces(CALL_MODE_DIRECT_CHANGE);
}
void changeBrightness(bool increase) {
#ifdef USERMOD_FOUR_LINE_DISPLAY
if (display && display->wakeDisplay()) {
// Throw away wake up input
return;
}
#endif
if (increase) bri = (bri + fadeAmount <= 255) ? (bri + fadeAmount) : 255;
else bri = (bri - fadeAmount >= 0) ? (bri - fadeAmount) : 0;
lampUdated();
#ifdef USERMOD_FOUR_LINE_DISPLAY
display->updateBrightness();
#endif
#ifdef USERMOD_FOUR_LINE_DISPLAY
if (display && display->wakeDisplay()) {
display->redraw(true);
// Throw away wake up input
return;
}
display->updateRedrawTime();
#endif
bri = max(min((increase ? bri+fadeAmount : bri-fadeAmount), 255), 0);
lampUdated();
#ifdef USERMOD_FOUR_LINE_DISPLAY
display->updateBrightness();
#endif
}
void changeEffect(bool increase) {
#ifdef USERMOD_FOUR_LINE_DISPLAY
if (display && display->wakeDisplay()) {
// Throw away wake up input
return;
}
#endif
if (increase) effectCurrentIndex = (effectCurrentIndex + 1 >= strip.getModeCount()) ? 0 : (effectCurrentIndex + 1);
else effectCurrentIndex = (effectCurrentIndex - 1 < 0) ? (strip.getModeCount() - 1) : (effectCurrentIndex - 1);
effectCurrent = modes_alpha_indexes[effectCurrentIndex];
lampUdated();
#ifdef USERMOD_FOUR_LINE_DISPLAY
display->showCurrentEffectOrPalette(effectCurrent, JSON_mode_names, 3);
#endif
#ifdef USERMOD_FOUR_LINE_DISPLAY
if (display && display->wakeDisplay()) {
display->redraw(true);
// Throw away wake up input
return;
}
display->updateRedrawTime();
#endif
effectCurrentIndex = max(min((increase ? effectCurrentIndex+1 : effectCurrentIndex-1), strip.getModeCount()-1), 0);
effectCurrent = modes_alpha_indexes[effectCurrentIndex];
effectChanged = true;
if (applyToAll) {
for (byte i=0; i<strip.getMaxSegments(); i++) {
WS2812FX::Segment& seg = strip.getSegment(i);
if (!seg.isActive()) continue;
strip.setMode(i, effectCurrent);
}
} else {
//WS2812FX::Segment& seg = strip.getSegment(strip.getMainSegmentId());
strip.setMode(strip.getMainSegmentId(), effectCurrent);
}
lampUdated();
#ifdef USERMOD_FOUR_LINE_DISPLAY
display->showCurrentEffectOrPalette(effectCurrent, JSON_mode_names, 3);
#endif
}
void changeEffectSpeed(bool increase) {
#ifdef USERMOD_FOUR_LINE_DISPLAY
if (display && display->wakeDisplay()) {
// Throw away wake up input
return;
}
#endif
if (increase) effectSpeed = (effectSpeed + fadeAmount <= 255) ? (effectSpeed + fadeAmount) : 255;
else effectSpeed = (effectSpeed - fadeAmount >= 0) ? (effectSpeed - fadeAmount) : 0;
lampUdated();
#ifdef USERMOD_FOUR_LINE_DISPLAY
display->updateSpeed();
#endif
#ifdef USERMOD_FOUR_LINE_DISPLAY
if (display && display->wakeDisplay()) {
display->redraw(true);
// Throw away wake up input
return;
}
display->updateRedrawTime();
#endif
effectSpeed = max(min((increase ? effectSpeed+fadeAmount : effectSpeed-fadeAmount), 255), 0);
effectChanged = true;
if (applyToAll) {
for (byte i=0; i<strip.getMaxSegments(); i++) {
WS2812FX::Segment& seg = strip.getSegment(i);
if (!seg.isActive()) continue;
seg.speed = effectSpeed;
}
} else {
WS2812FX::Segment& seg = strip.getSegment(strip.getMainSegmentId());
seg.speed = effectSpeed;
}
lampUdated();
#ifdef USERMOD_FOUR_LINE_DISPLAY
display->updateSpeed();
#endif
}
void changeEffectIntensity(bool increase) {
#ifdef USERMOD_FOUR_LINE_DISPLAY
if (display && display->wakeDisplay()) {
// Throw away wake up input
return;
}
#endif
if (increase) effectIntensity = (effectIntensity + fadeAmount <= 255) ? (effectIntensity + fadeAmount) : 255;
else effectIntensity = (effectIntensity - fadeAmount >= 0) ? (effectIntensity - fadeAmount) : 0;
lampUdated();
#ifdef USERMOD_FOUR_LINE_DISPLAY
display->updateIntensity();
#endif
#ifdef USERMOD_FOUR_LINE_DISPLAY
if (display && display->wakeDisplay()) {
display->redraw(true);
// Throw away wake up input
return;
}
display->updateRedrawTime();
#endif
effectIntensity = max(min((increase ? effectIntensity+fadeAmount : effectIntensity-fadeAmount), 255), 0);
effectChanged = true;
if (applyToAll) {
for (byte i=0; i<strip.getMaxSegments(); i++) {
WS2812FX::Segment& seg = strip.getSegment(i);
if (!seg.isActive()) continue;
seg.intensity = effectIntensity;
}
} else {
WS2812FX::Segment& seg = strip.getSegment(strip.getMainSegmentId());
seg.intensity = effectIntensity;
}
lampUdated();
#ifdef USERMOD_FOUR_LINE_DISPLAY
display->updateIntensity();
#endif
}
void changePalette(bool increase) {
#ifdef USERMOD_FOUR_LINE_DISPLAY
if (display && display->wakeDisplay()) {
// Throw away wake up input
return;
}
#endif
if (increase) effectPaletteIndex = (effectPaletteIndex + 1 >= strip.getPaletteCount()) ? 0 : (effectPaletteIndex + 1);
else effectPaletteIndex = (effectPaletteIndex - 1 < 0) ? (strip.getPaletteCount() - 1) : (effectPaletteIndex - 1);
effectPalette = palettes_alpha_indexes[effectPaletteIndex];
lampUdated();
#ifdef USERMOD_FOUR_LINE_DISPLAY
display->showCurrentEffectOrPalette(effectPalette, JSON_palette_names, 2);
#endif
#ifdef USERMOD_FOUR_LINE_DISPLAY
if (display && display->wakeDisplay()) {
display->redraw(true);
// Throw away wake up input
return;
}
display->updateRedrawTime();
#endif
effectPaletteIndex = max(min((increase ? effectPaletteIndex+1 : effectPaletteIndex-1), strip.getPaletteCount()-1), 0);
effectPalette = palettes_alpha_indexes[effectPaletteIndex];
effectChanged = true;
if (applyToAll) {
for (byte i=0; i<strip.getMaxSegments(); i++) {
WS2812FX::Segment& seg = strip.getSegment(i);
if (!seg.isActive()) continue;
seg.palette = effectPalette;
}
} else {
WS2812FX::Segment& seg = strip.getSegment(strip.getMainSegmentId());
seg.palette = effectPalette;
}
lampUdated();
#ifdef USERMOD_FOUR_LINE_DISPLAY
display->showCurrentEffectOrPalette(effectPalette, JSON_palette_names, 2);
#endif
}
void changeHue(bool increase){
#ifdef USERMOD_FOUR_LINE_DISPLAY
if (display && display->wakeDisplay()) {
// Throw away wake up input
return;
}
#endif
if(increase) currentHue1 += 321;
else currentHue1 -= 321;
colorHStoRGB(currentHue1, currentSat1, col);
lampUdated();
#ifdef USERMOD_FOUR_LINE_DISPLAY
display->updateRedrawTime();
#endif
#ifdef USERMOD_FOUR_LINE_DISPLAY
if (display && display->wakeDisplay()) {
display->redraw(true);
// Throw away wake up input
return;
}
display->updateRedrawTime();
#endif
currentHue1 = max(min((increase ? currentHue1+fadeAmount : currentHue1-fadeAmount), 255), 0);
colorHStoRGB(currentHue1*256, currentSat1, col);
colorChanged = true;
if (applyToAll) {
for (byte i=0; i<strip.getMaxSegments(); i++) {
WS2812FX::Segment& seg = strip.getSegment(i);
if (!seg.isActive()) continue;
seg.colors[0] = RGBW32(col[0], col[1], col[2], col[3]);
}
} else {
WS2812FX::Segment& seg = strip.getSegment(strip.getMainSegmentId());
seg.colors[0] = RGBW32(col[0], col[1], col[2], col[3]);
}
lampUdated();
}
void changeSat(bool increase){
#ifdef USERMOD_FOUR_LINE_DISPLAY
if (display && display->wakeDisplay()) {
// Throw away wake up input
return;
}
#endif
#ifdef USERMOD_FOUR_LINE_DISPLAY
if (display && display->wakeDisplay()) {
display->redraw(true);
// Throw away wake up input
return;
}
display->updateRedrawTime();
#endif
currentSat1 = max(min((increase ? currentSat1+fadeAmount : currentSat1-fadeAmount), 255), 0);
colorHStoRGB(currentHue1*256, currentSat1, col);
if (applyToAll) {
for (byte i=0; i<strip.getMaxSegments(); i++) {
WS2812FX::Segment& seg = strip.getSegment(i);
if (!seg.isActive()) continue;
seg.colors[0] = RGBW32(col[0], col[1], col[2], col[3]);
}
} else {
WS2812FX::Segment& seg = strip.getSegment(strip.getMainSegmentId());
seg.colors[0] = RGBW32(col[0], col[1], col[2], col[3]);
}
lampUdated();
}
if(increase) currentSat1 = (currentSat1 + 5 <= 255 ? (currentSat1 + 5) : 255);
else currentSat1 = (currentSat1 - 5 >= 0 ? (currentSat1 - 5) : 0);
colorHStoRGB(currentHue1, currentSat1, col);
lampUdated();
#ifdef USERMOD_FOUR_LINE_DISPLAY
display->updateRedrawTime();
#endif
void changePreset(bool increase) {
#ifdef USERMOD_FOUR_LINE_DISPLAY
if (display && display->wakeDisplay()) {
display->redraw(true);
// Throw away wake up input
return;
}
display->updateRedrawTime();
#endif
if (presetHigh && presetLow && presetHigh > presetLow) {
String apireq = F("win&PL=~");
if (!increase) apireq += '-';
apireq += F("&P1=");
apireq += presetLow;
apireq += F("&P2=");
apireq += presetHigh;
handleSet(nullptr, apireq, false);
lampUdated();
}
}
void changeCCT(bool increase){
#ifdef USERMOD_FOUR_LINE_DISPLAY
if (display && display->wakeDisplay()) {
display->redraw(true);
// Throw away wake up input
return;
}
display->updateRedrawTime();
#endif
currentCCT = max(min((increase ? currentCCT+fadeAmount : currentCCT-fadeAmount), 255), 0);
// if (applyToAll) {
for (byte i=0; i<strip.getMaxSegments(); i++) {
WS2812FX::Segment& seg = strip.getSegment(i);
if (!seg.isActive()) continue;
seg.setCCT(currentCCT, i);
}
// } else {
// WS2812FX::Segment& seg = strip.getSegment(strip.getMainSegmentId());
// seg.setCCT(currentCCT, strip.getMainSegmentId());
// }
lampUdated();
}
/*
* addToJsonInfo() can be used to add custom entries to the /json/info part of the JSON API.
* Creating an "u" object allows you to add custom key/value pairs to the Info section of the WLED web UI.
* Below it is shown how this could be used for e.g. a light sensor
*/
* addToJsonInfo() can be used to add custom entries to the /json/info part of the JSON API.
* Creating an "u" object allows you to add custom key/value pairs to the Info section of the WLED web UI.
* Below it is shown how this could be used for e.g. a light sensor
*/
/*
void addToJsonInfo(JsonObject& root)
{
int reading = 20;
//this code adds "u":{"Light":[20," lux"]} to the info object
JsonObject user = root["u"];
if (user.isNull()) user = root.createNestedObject("u");
JsonArray lightArr = user.createNestedArray("Light"); //name
lightArr.add(reading); //value
lightArr.add(" lux"); //unit
}
*/
void addToJsonInfo(JsonObject& root)
{
int reading = 20;
//this code adds "u":{"Light":[20," lux"]} to the info object
JsonObject user = root["u"];
if (user.isNull()) user = root.createNestedObject("u");
JsonArray lightArr = user.createNestedArray("Light"); //name
lightArr.add(reading); //value
lightArr.add(" lux"); //unit
}
*/
/*
* addToJsonState() can be used to add custom entries to the /json/state part of the JSON API (state object).
* Values in the state object may be modified by connected clients
*/
* addToJsonState() can be used to add custom entries to the /json/state part of the JSON API (state object).
* Values in the state object may be modified by connected clients
*/
/*
void addToJsonState(JsonObject &root)
{
//root["user0"] = userVar0;
}
*/
/*
* readFromJsonState() can be used to receive data clients send to the /json/state part of the JSON API (state object).
* Values in the state object may be modified by connected clients
*/
* readFromJsonState() can be used to receive data clients send to the /json/state part of the JSON API (state object).
* Values in the state object may be modified by connected clients
*/
/*
void readFromJsonState(JsonObject &root)
{
//userVar0 = root["user0"] | userVar0; //if "user0" key exists in JSON, update, else keep old value
//if (root["bri"] == 255) Serial.println(F("Don't burn down your garage!"));
}
*/
/**
* addToConfig() (called from set.cpp) stores persistent properties to cfg.json
@ -498,6 +749,9 @@ public:
top[FPSTR(_DT_pin)] = pinA;
top[FPSTR(_CLK_pin)] = pinB;
top[FPSTR(_SW_pin)] = pinC;
top[FPSTR(_presetLow)] = presetLow;
top[FPSTR(_presetHigh)] = presetHigh;
top[FPSTR(_applyToAll)] = applyToAll;
DEBUG_PRINTLN(F("Rotary Encoder config saved."));
}
@ -514,14 +768,17 @@ public:
DEBUG_PRINTLN(F(": No config found. (Using defaults.)"));
return false;
}
int8_t newDTpin = pinA;
int8_t newCLKpin = pinB;
int8_t newSWpin = pinC;
int8_t newDTpin = top[FPSTR(_DT_pin)] | pinA;
int8_t newCLKpin = top[FPSTR(_CLK_pin)] | pinB;
int8_t newSWpin = top[FPSTR(_SW_pin)] | pinC;
enabled = top[FPSTR(_enabled)] | enabled;
newDTpin = top[FPSTR(_DT_pin)] | newDTpin;
newCLKpin = top[FPSTR(_CLK_pin)] | newCLKpin;
newSWpin = top[FPSTR(_SW_pin)] | newSWpin;
presetHigh = top[FPSTR(_presetHigh)] | presetHigh;
presetLow = top[FPSTR(_presetLow)] | presetLow;
presetHigh = MIN(250,MAX(0,presetHigh));
presetLow = MIN(250,MAX(0,presetLow));
enabled = top[FPSTR(_enabled)] | enabled;
applyToAll = top[FPSTR(_applyToAll)] | applyToAll;
DEBUG_PRINT(FPSTR(_name));
if (!initDone) {
@ -548,7 +805,7 @@ public:
}
}
// use "return !top["newestParameter"].isNull();" when updating Usermod with new features
return !top[FPSTR(_enabled)].isNull();
return !top[FPSTR(_applyToAll)].isNull();
}
/*
@ -562,8 +819,11 @@ public:
};
// strings to reduce flash memory usage (used more than twice)
const char RotaryEncoderUIUsermod::_name[] PROGMEM = "Rotary-Encoder";
const char RotaryEncoderUIUsermod::_enabled[] PROGMEM = "enabled";
const char RotaryEncoderUIUsermod::_DT_pin[] PROGMEM = "DT-pin";
const char RotaryEncoderUIUsermod::_CLK_pin[] PROGMEM = "CLK-pin";
const char RotaryEncoderUIUsermod::_SW_pin[] PROGMEM = "SW-pin";
const char RotaryEncoderUIUsermod::_name[] PROGMEM = "Rotary-Encoder";
const char RotaryEncoderUIUsermod::_enabled[] PROGMEM = "enabled";
const char RotaryEncoderUIUsermod::_DT_pin[] PROGMEM = "DT-pin";
const char RotaryEncoderUIUsermod::_CLK_pin[] PROGMEM = "CLK-pin";
const char RotaryEncoderUIUsermod::_SW_pin[] PROGMEM = "SW-pin";
const char RotaryEncoderUIUsermod::_presetHigh[] PROGMEM = "preset-high";
const char RotaryEncoderUIUsermod::_presetLow[] PROGMEM = "preset-low";
const char RotaryEncoderUIUsermod::_applyToAll[] PROGMEM = "apply-2-all-seg";

4
wled00/fcn_declare.h
View File

@ -23,6 +23,8 @@ void updateBlynk();
//button.cpp
void shortPressAction(uint8_t b=0);
void longPressAction(uint8_t b=0);
void doublePressAction(uint8_t b=0);
bool isButtonPressed(uint8_t b=0);
void handleButton();
void handleIO();
@ -191,7 +193,9 @@ void handlePlaylist();
//presets.cpp
bool applyPreset(byte index, byte callMode = CALL_MODE_DIRECT_CHANGE);
inline bool applyTemporaryPreset() {return applyPreset(255);};
void savePreset(byte index, bool persist = true, const char* pname = nullptr, JsonObject saveobj = JsonObject());
inline void saveTemporaryPreset() {savePreset(255, false);};
void deletePreset(byte index);
//set.cpp