Merge pull request #828 from srg74/master

Update user mode directories

.gitignore

@@ -6,4 +6,6 @@
 /wled00/Release
 /wled00/extLibs
 /platformio_override.ini
+.DS_Store
+.gitignore
 .clang-format

usermods/Enclosure_with_OLED_temp_ESP07/readme.md

@@ -1,5 +1,7 @@
 # Almost universal controller board for outdoor applications
 This usermod is using ideas from @mrVanboy and @400killer
+
+Installation of file: Copy and replace file in wled00 directory
 ## Project repository
 -   [Original repository](https://github.com/srg74/Controller-for-WLED-firmware) - Main controller repository
 ## Features
@@ -25,6 +27,11 @@ Uncomment `U8g2@~2.27.3`,`DallasTemperature@~3.8.0`,`OneWire@~2.3.5 under` `[com
 ```ini
 # platformio.ini
 ...
+[platformio]
+...
+; default_envs = esp01_1m_full
+default_envs = esp07
+...
 [common]
 ...
 lib_deps_external =

usermods/Enclosure_with_OLED_temp_ESP07/usermod.cpp

@@ -1,3 +1,5 @@
+#include "wled.h"
+#include <Arduino.h>
 #include <U8x8lib.h> // from https://github.com/olikraus/u8g2/
 #include <DallasTemperature.h> //Dallastemperature sensor
 //The SCL and SDA pins are defined here. 

usermods/QuinLED_Dig_Uno_Temp_MQTT/readme.md

@@ -1,7 +1,34 @@
-These files allow WLED 0.9.1 to report the temp sensor on the Quinled board to MQTT. I use it to report the board temp to Home Assistant via MQTT, so it will send notifications if something happens and the board start to heat up.
+# QuinLED Dig Uno board
 
+These files allow WLED 0.9.1 to report the temp sensor on the Quinled board to MQTT. I use it to report the board temp to Home Assistant via MQTT, so it will send notifications if something happens and the board start to heat up.
 This code uses Aircookie's WLED software. It has a premade file for user modifications. I use it to publish the temperature from the dallas temperature sensor on the Quinled board. The entries for the top of the WLED00 file, initializes the required libraries, and variables for the sensor. The .ino file waits for 60 seconds, and checks to see if the MQTT server is connected (thanks Aircoookie). It then poles the sensor, and published it using the MQTT service already running, using the main topic programmed in the WLED UI.
 
-To install:
+Installation of file: Copy and replace file in wled00 directory
 
-Replace the WLED06_usermod.ino file in Aircoookies WLED folder.
+## Project link
+
+* [QuinLED-Dig-Uno](https://quinled.info/2018/09/15/quinled-dig-uno/) - Project link
+
+### Platformio requirements
+
+Uncomment `DallasTemperature@~3.8.0`,`OneWire@~2.3.5 under` `[common]` section in `platformio.ini`:
+
+```ini
+# platformio.ini
+...
+[platformio]
+...
+; default_envs = esp07
+default_envs = d1_mini
+...
+[common]
+...
+lib_deps_external =
+  ...
+  #For use SSD1306 OLED display uncomment following
+  U8g2@~2.27.3
+  #For Dallas sensor uncomment following 2 lines
+  DallasTemperature@~3.8.0
+  OneWire@~2.3.5
+...
+```

usermods/QuinLED_Dig_Uno_Temp_MQTT/usermod.cpp

@@ -1,3 +1,5 @@
+#include <Arduino.h>
+#include "wled.h"
 //Intiating code for QuinLED Dig-Uno temp sensor
 //Uncomment Celsius if that is your prefered temperature scale
 #include <DallasTemperature.h> //Dallastemperature sensor

usermods/Wemos_D1_mini+Wemos32_mini_shield/readme.md

@@ -1,4 +1,5 @@
 # Wemos D1 mini and Wemos32 mini shield
+-   Installation of file: Copy and replace file in wled00 directory
 -   Added third choice of controller Heltec WiFi-Kit-8. Totally DIY but with OLED display.
 ## Project repository
 -   [Original repository](https://github.com/srg74/WLED-wemos-shield) - WLED Wemos shield repository
@@ -22,3 +23,25 @@
 -   SSD1306 128x32 I2C OLED display
 -   DS18B20 (temperature sensor)
 -   Push button (N.O. momentary switch)
+
+### Platformio requirements
+Uncomment `U8g2@~2.27.3`,`DallasTemperature@~3.8.0`,`OneWire@~2.3.5 under` `[common]` section in `platformio.ini`:
+```ini
+# platformio.ini
+...
+[platformio]
+...
+; default_envs = esp07
+default_envs = d1_mini
+...
+[common]
+...
+lib_deps_external =
+  ...
+  #For use SSD1306 OLED display uncomment following
+  U8g2@~2.27.3
+  #For Dallas sensor uncomment following 2 lines
+  DallasTemperature@~3.8.0
+  OneWire@~2.3.5
+...
+```

usermods/Wemos_D1_mini+Wemos32_mini_shield/usermod.cpp

@@ -1,3 +1,5 @@
+#include "wled.h"
+#include <Arduino.h>
 #include <U8x8lib.h> // from https://github.com/olikraus/u8g2/
 #include <DallasTemperature.h> //Dallastemperature sensor
 #ifdef ARDUINO_ARCH_ESP32 //ESP32 boards