Ethernet configuration fix, improve PinManager (#2123)
* Improved pin manager, ethernet config * Ethernet is configured prior even to LED pins * Pin Manager allocation / deallocation functions now take an "ownership" tag parameter, helping avoid accidentally free'ing pins that were allocated by other code * Pin Manager now has ability to allocate multiple pins at once; Simplifies error handling * Fix operator precedence error Bitwise AND has lower precedence than the relational "greater than" operator. * PinManager update for some user modules * don't build everything... * Final step to reduce RAM overhead * update comment * remove macros * Remove leftover allocated * Init ethernet after settings saved Co-authored-by: Christian Schwinne <dev.aircoookie@gmail.com>
This commit is contained in:
Henry Gabryjelski
GitHub
parent
ff8145b745
commit
1d4487b6cd
@ -8,12 +8,15 @@
|
||||
# Please uncomment one of the lines below to select your board(s)
|
||||
# ------------------------------------------------------------------------------
|
||||
|
||||
# Travis CI binaries (comment this out with a ';' when building for your own board)
|
||||
;default_envs = travis_esp8266, travis_esp32
|
||||
# Travis CI binaries (use `platformio_override.ini` when building for your own board; see `platformio_override.ini.sample` for an example)
|
||||
; default_envs = travis_esp8266, travis_esp32
|
||||
|
||||
# Release binaries
|
||||
default_envs = nodemcuv2, esp01_1m_full, esp32dev, esp32_eth
|
||||
|
||||
# Build everything
|
||||
; default_envs = esp32dev, esp8285_4CH_MagicHome, esp8285_4CH_H801, codm-controller-0.6-rev2, codm-controller-0.6, esp32s2_saola, d1_mini_5CH_Shojo_PCB, d1_mini, sp501e, travis_esp8266, travis_esp32, nodemcuv2, esp32_eth, anavi_miracle_controller, esp07, esp01_1m_full, m5atom, h803wf, d1_mini_ota, heltec_wifi_kit_8, esp8285_5CH_H801, d1_mini_debug, wemos_shield_esp32, elekstube_ips
|
||||
|
||||
# Single binaries (uncomment your board)
|
||||
; default_envs = elekstube_ips
|
||||
; default_envs = nodemcuv2
|
||||
@ -399,7 +402,7 @@ build_flags = ${common.build_flags_esp32}
|
||||
-D TEMPERATURE_PIN=23
|
||||
lib_deps = ${esp32.lib_deps}
|
||||
OneWire@~2.3.5
|
||||
U8g2@~2.28.11
|
||||
olikraus/U8g2 @ ^2.28.8
|
||||
|
||||
[env:m5atom]
|
||||
board = esp32dev
|
||||
@ -482,4 +485,6 @@ build_flags = ${common.build_flags_esp32} -D WLED_DISABLE_BROWNOUT_DET -D WLED_D
|
||||
-D SPI_FREQUENCY=40000000
|
||||
-D USER_SETUP_LOADED
|
||||
monitor_filters = esp32_exception_decoder
|
||||
lib_deps = ${esp32.lib_deps} TFT_eSPI
|
||||
lib_deps =
|
||||
${esp32.lib_deps}
|
||||
TFT_eSPI @ ^2.3.70
|
||||
|
||||
@ -306,22 +306,26 @@ class Animated_Staircase : public Usermod {
|
||||
|
||||
public:
|
||||
void setup() {
|
||||
// standardize invalid pin numbers to -1
|
||||
if (topPIRorTriggerPin < 0) topPIRorTriggerPin = -1;
|
||||
if (topEchoPin < 0) topEchoPin = -1;
|
||||
if (bottomPIRorTriggerPin < 0) bottomPIRorTriggerPin = -1;
|
||||
if (bottomEchoPin < 0) bottomEchoPin = -1;
|
||||
// allocate pins
|
||||
if (topPIRorTriggerPin >= 0) {
|
||||
if (!pinManager.allocatePin(topPIRorTriggerPin,useUSSensorTop))
|
||||
topPIRorTriggerPin = -1;
|
||||
}
|
||||
if (topEchoPin >= 0) {
|
||||
if (!pinManager.allocatePin(topEchoPin,false))
|
||||
topEchoPin = -1;
|
||||
}
|
||||
if (bottomPIRorTriggerPin >= 0) {
|
||||
if (!pinManager.allocatePin(bottomPIRorTriggerPin,useUSSensorBottom))
|
||||
bottomPIRorTriggerPin = -1;
|
||||
}
|
||||
if (bottomEchoPin >= 0) {
|
||||
if (!pinManager.allocatePin(bottomEchoPin,false))
|
||||
bottomEchoPin = -1;
|
||||
PinManagerPinType pins[4] = {
|
||||
{ topPIRorTriggerPin, useUSSensorTop },
|
||||
{ topEchoPin, false },
|
||||
{ bottomPIRorTriggerPin, useUSSensorBottom },
|
||||
{ bottomEchoPin, false },
|
||||
};
|
||||
// NOTE: this *WILL* return TRUE if all the pins are set to -1.
|
||||
// this is *BY DESIGN*.
|
||||
if (!pinManager.allocateMultiplePins(pins, 4, PinOwner::UM_AnimatedStaircase)) {
|
||||
topPIRorTriggerPin = -1;
|
||||
topEchoPin = -1;
|
||||
bottomPIRorTriggerPin = -1;
|
||||
bottomEchoPin = -1;
|
||||
enabled = false;
|
||||
}
|
||||
enable(enabled);
|
||||
initDone = true;
|
||||
@ -480,10 +484,10 @@ class Animated_Staircase : public Usermod {
|
||||
(oldBottomAPin != bottomPIRorTriggerPin) ||
|
||||
(oldBottomBPin != bottomEchoPin)) {
|
||||
changed = true;
|
||||
pinManager.deallocatePin(oldTopAPin);
|
||||
pinManager.deallocatePin(oldTopBPin);
|
||||
pinManager.deallocatePin(oldBottomAPin);
|
||||
pinManager.deallocatePin(oldBottomBPin);
|
||||
pinManager.deallocatePin(oldTopAPin, PinOwner::UM_AnimatedStaircase);
|
||||
pinManager.deallocatePin(oldTopBPin, PinOwner::UM_AnimatedStaircase);
|
||||
pinManager.deallocatePin(oldBottomAPin, PinOwner::UM_AnimatedStaircase);
|
||||
pinManager.deallocatePin(oldBottomBPin, PinOwner::UM_AnimatedStaircase);
|
||||
}
|
||||
if (changed) setup();
|
||||
}
|
||||
|
||||
@ -58,12 +58,12 @@ public:
|
||||
void setMinutesTens() { setDigit(MINUTES_TENS); }
|
||||
void setHoursOnes() { setDigit(HOURS_ONES); }
|
||||
void setHoursTens() { setDigit(HOURS_TENS); }
|
||||
bool isSecondsOnes() { return (digits_map&SECONDS_ONES_MAP > 0); }
|
||||
bool isSecondsTens() { return (digits_map&SECONDS_TENS_MAP > 0); }
|
||||
bool isMinutesOnes() { return (digits_map&MINUTES_ONES_MAP > 0); }
|
||||
bool isMinutesTens() { return (digits_map&MINUTES_TENS_MAP > 0); }
|
||||
bool isHoursOnes() { return (digits_map&HOURS_ONES_MAP > 0); }
|
||||
bool isHoursTens() { return (digits_map&HOURS_TENS_MAP > 0); }
|
||||
bool isSecondsOnes() { return ((digits_map & SECONDS_ONES_MAP) > 0); }
|
||||
bool isSecondsTens() { return ((digits_map & SECONDS_TENS_MAP) > 0); }
|
||||
bool isMinutesOnes() { return ((digits_map & MINUTES_ONES_MAP) > 0); }
|
||||
bool isMinutesTens() { return ((digits_map & MINUTES_TENS_MAP) > 0); }
|
||||
bool isHoursOnes() { return ((digits_map & HOURS_ONES_MAP) > 0); }
|
||||
bool isHoursTens() { return ((digits_map & HOURS_TENS_MAP) > 0); }
|
||||
};
|
||||
|
||||
|
||||
|
||||
@ -201,12 +201,14 @@ public:
|
||||
{
|
||||
if (enabled) {
|
||||
// pin retrieved from cfg.json (readFromConfig()) prior to running setup()
|
||||
if (PIRsensorPin >= 0 && pinManager.allocatePin(PIRsensorPin,false)) {
|
||||
if (PIRsensorPin >= 0 && pinManager.allocatePin(PIRsensorPin, false, PinOwner::UM_PIR)) {
|
||||
// PIR Sensor mode INPUT_PULLUP
|
||||
pinMode(PIRsensorPin, INPUT_PULLUP);
|
||||
sensorPinState = digitalRead(PIRsensorPin);
|
||||
} else {
|
||||
if (PIRsensorPin >= 0) DEBUG_PRINTLN(F("PIRSensorSwitch pin allocation failed."));
|
||||
if (PIRsensorPin >= 0) {
|
||||
DEBUG_PRINTLN(F("PIRSensorSwitch pin allocation failed."));
|
||||
}
|
||||
PIRsensorPin = -1; // allocation failed
|
||||
enabled = false;
|
||||
}
|
||||
@ -367,8 +369,8 @@ public:
|
||||
if (oldPin != PIRsensorPin && oldPin >= 0) {
|
||||
// if we are changing pin in settings page
|
||||
// deallocate old pin
|
||||
pinManager.deallocatePin(oldPin);
|
||||
if (pinManager.allocatePin(PIRsensorPin,false)) {
|
||||
pinManager.deallocatePin(oldPin, PinOwner::UM_PIR);
|
||||
if (pinManager.allocatePin(PIRsensorPin, false, PinOwner::UM_PIR)) {
|
||||
pinMode(PIRsensorPin, INPUT_PULLUP);
|
||||
} else {
|
||||
// allocation failed
|
||||
|
||||
@ -115,14 +115,19 @@ class UsermodTemperature : public Usermod {
|
||||
// config says we are enabled
|
||||
DEBUG_PRINTLN(F("Allocating temperature pin..."));
|
||||
// pin retrieved from cfg.json (readFromConfig()) prior to running setup()
|
||||
if (temperaturePin >= 0 && pinManager.allocatePin(temperaturePin)) {
|
||||
if (temperaturePin >= 0 && pinManager.allocatePin(temperaturePin, true, PinOwner::UM_Temperature)) {
|
||||
oneWire = new OneWire(temperaturePin);
|
||||
if (!oneWire->reset())
|
||||
if (!oneWire->reset()) {
|
||||
sensorFound = false; // resetting 1-Wire bus yielded an error
|
||||
else
|
||||
while ((sensorFound=findSensor()) && retries--) delay(25); // try to find sensor
|
||||
} else {
|
||||
while ((sensorFound=findSensor()) && retries--) {
|
||||
delay(25); // try to find sensor
|
||||
}
|
||||
}
|
||||
} else {
|
||||
if (temperaturePin >= 0) DEBUG_PRINTLN(F("Temperature pin allocation failed."));
|
||||
if (temperaturePin >= 0) {
|
||||
DEBUG_PRINTLN(F("Temperature pin allocation failed."));
|
||||
}
|
||||
temperaturePin = -1; // allocation failed
|
||||
sensorFound = false;
|
||||
}
|
||||
@ -273,7 +278,7 @@ class UsermodTemperature : public Usermod {
|
||||
DEBUG_PRINTLN(F("Re-init temperature."));
|
||||
// deallocate pin and release memory
|
||||
delete oneWire;
|
||||
pinManager.deallocatePin(temperaturePin);
|
||||
pinManager.deallocatePin(temperaturePin, PinOwner::UM_Temperature);
|
||||
temperaturePin = newTemperaturePin;
|
||||
// initialise
|
||||
setup();
|
||||
|
||||
@ -258,7 +258,7 @@ class MultiRelay : public Usermod {
|
||||
// pins retrieved from cfg.json (readFromConfig()) prior to running setup()
|
||||
for (uint8_t i=0; i<MULTI_RELAY_MAX_RELAYS; i++) {
|
||||
if (_relay[i].pin<0) continue;
|
||||
if (!pinManager.allocatePin(_relay[i].pin,true)) {
|
||||
if (!pinManager.allocatePin(_relay[i].pin,true, PinOwner::UM_MultiRelay)) {
|
||||
_relay[i].pin = -1; // allocation failed
|
||||
} else {
|
||||
switchRelay(i, _relay[i].state = (bool)bri);
|
||||
@ -380,12 +380,14 @@ class MultiRelay : public Usermod {
|
||||
// deallocate all pins 1st
|
||||
for (uint8_t i=0; i<MULTI_RELAY_MAX_RELAYS; i++)
|
||||
if (oldPin[i]>=0) {
|
||||
pinManager.deallocatePin(oldPin[i]);
|
||||
pinManager.deallocatePin(oldPin[i], PinOwner::UM_MultiRelay);
|
||||
}
|
||||
// allocate new pins
|
||||
for (uint8_t i=0; i<MULTI_RELAY_MAX_RELAYS; i++) {
|
||||
if (_relay[i].pin>=0 && pinManager.allocatePin(_relay[i].pin,true)) {
|
||||
if (!_relay[i].external) switchRelay(i, _relay[i].state = (bool)bri);
|
||||
if (_relay[i].pin>=0 && pinManager.allocatePin(_relay[i].pin, true, PinOwner::UM_MultiRelay)) {
|
||||
if (!_relay[i].external) {
|
||||
switchRelay(i, _relay[i].state = (bool)bri);
|
||||
}
|
||||
} else {
|
||||
_relay[i].pin = -1;
|
||||
}
|
||||
|
||||
@ -13,7 +13,7 @@ class RgbRotaryEncoderUsermod : public Usermod
|
||||
BusDigital *ledBus;
|
||||
/*
|
||||
* Green - eb - Q4 - 32
|
||||
* Red - ea - Q1 - 15
|
||||
* Red - ea - Q1 - 15
|
||||
* Black - sw - Q2 - 12
|
||||
*/
|
||||
ESPRotary *rotaryEncoder;
|
||||
@ -39,13 +39,10 @@ class RgbRotaryEncoderUsermod : public Usermod
|
||||
|
||||
void initRotaryEncoder()
|
||||
{
|
||||
if (!pinManager.allocatePin(eaIo, false)) {
|
||||
PinManagerPinType pins[2] = { { eaIo, false }, { ebIo, false } };
|
||||
if (!pinManager.allocateMultiplePins(pins, 2, UM_RGBRotaryEncoder)) {
|
||||
eaIo = -1;
|
||||
}
|
||||
if (!pinManager.allocatePin(ebIo, false)) {
|
||||
ebIo = -1;
|
||||
}
|
||||
if (eaIo == -1 || ebIo == -1) {
|
||||
cleanup();
|
||||
return;
|
||||
}
|
||||
@ -111,10 +108,12 @@ class RgbRotaryEncoderUsermod : public Usermod
|
||||
{
|
||||
// Only deallocate pins if we allocated them ;)
|
||||
if (eaIo != -1) {
|
||||
pinManager.deallocatePin(eaIo);
|
||||
pinManager.deallocatePin(eaIo, PinOwner::UM_RGBRotaryEncoder);
|
||||
eaIo = -1;
|
||||
}
|
||||
if (ebIo != -1) {
|
||||
pinManager.deallocatePin(ebIo);
|
||||
pinManager.deallocatePin(ebIo, PinOwner::UM_RGBRotaryEncoder);
|
||||
ebIo = -1;
|
||||
}
|
||||
|
||||
delete rotaryEncoder;
|
||||
@ -304,8 +303,8 @@ class RgbRotaryEncoderUsermod : public Usermod
|
||||
}
|
||||
|
||||
if (eaIo != oldEaIo || ebIo != oldEbIo || stepsPerClick != oldStepsPerClick || incrementPerClick != oldIncrementPerClick) {
|
||||
pinManager.deallocatePin(oldEaIo);
|
||||
pinManager.deallocatePin(oldEbIo);
|
||||
pinManager.deallocatePin(oldEaIo, PinOwner::UM_RGBRotaryEncoder);
|
||||
pinManager.deallocatePin(oldEbIo, PinOwner::UM_RGBRotaryEncoder);
|
||||
|
||||
delete rotaryEncoder;
|
||||
initRotaryEncoder();
|
||||
|
||||
@ -168,14 +168,13 @@ class FourLineDisplayUsermod : public Usermod {
|
||||
// network here
|
||||
void setup() {
|
||||
if (type == NONE) return;
|
||||
bool allocated = false;
|
||||
byte i;
|
||||
if (type == SSD1306_SPI || type == SSD1306_SPI64) {
|
||||
for (i=0; i<5; i++) if (!pinManager.allocatePin(ioPin[i])) { allocated=true; break; }
|
||||
if (i<5 && allocated) { for (byte i=0; i<5; i++) pinManager.deallocatePin(ioPin[i]); type=NONE; return; }
|
||||
PinManagerPinType pins[5] = { { ioPin[0], true }, { ioPin[1], true}, { ioPin[2], true }, { ioPin[3], true}, { ioPin[4], true }};
|
||||
if (!pinManager.allocateMultiplePins(pins, 5, PinOwner::UM_FourLineDisplay)) { type=NONE; return; }
|
||||
} else {
|
||||
for (i=0; i<2; i++) if (!pinManager.allocatePin(ioPin[i])) { allocated=true; break; }
|
||||
if (i<2 && allocated) { for (byte i=0; i<5; i++) pinManager.deallocatePin(ioPin[i]); type=NONE; return; }
|
||||
PinManagerPinType pins[2] = { { ioPin[0], true }, { ioPin[1], true} };
|
||||
if (!pinManager.allocateMultiplePins(pins, 2, PinOwner::UM_FourLineDisplay)) { type=NONE; return; }
|
||||
}
|
||||
DEBUG_PRINTLN(F("Allocating display."));
|
||||
switch (type) {
|
||||
@ -240,18 +239,20 @@ class FourLineDisplayUsermod : public Usermod {
|
||||
break;
|
||||
default:
|
||||
u8x8 = nullptr;
|
||||
}
|
||||
if (nullptr == u8x8) {
|
||||
DEBUG_PRINTLN(F("Display init failed."));
|
||||
pinManager.deallocatePin(sclPin, PinOwner::UM_FourLineDisplay);
|
||||
pinManager.deallocatePin(sdaPin, PinOwner::UM_FourLineDisplay);
|
||||
sclPin = -1;
|
||||
sdaPin = -1;
|
||||
type = NONE;
|
||||
return;
|
||||
}
|
||||
|
||||
initDone = true;
|
||||
if (u8x8 != nullptr) {
|
||||
DEBUG_PRINTLN(F("Starting display."));
|
||||
(static_cast<U8X8*>(u8x8))->begin();
|
||||
} else {
|
||||
DEBUG_PRINTLN(F("Display init failed."));
|
||||
type = NONE;
|
||||
return;
|
||||
}
|
||||
DEBUG_PRINTLN(F("Starting display."));
|
||||
(static_cast<U8X8*>(u8x8))->begin(); // why a static cast here? variable is of this type...
|
||||
setFlipMode(flip);
|
||||
setContrast(contrast); //Contrast setup will help to preserve OLED lifetime. In case OLED need to be brighter increase number up to 255
|
||||
setPowerSave(0);
|
||||
@ -727,7 +728,7 @@ class FourLineDisplayUsermod : public Usermod {
|
||||
if (pinsChanged || type!=newType) {
|
||||
if (type != NONE) delete (static_cast<U8X8*>(u8x8));
|
||||
for (byte i=0; i<5; i++) {
|
||||
if (ioPin[i]>=0) pinManager.deallocatePin(ioPin[i]);
|
||||
if (ioPin[i]>=0) pinManager.deallocatePin(ioPin[i], PinOwner::UM_FourLineDisplay);
|
||||
ioPin[i] = newPin[i];
|
||||
}
|
||||
if (ioPin[0]<0 || ioPin[1]<0) { // data & clock must be > -1
|
||||
@ -735,7 +736,9 @@ class FourLineDisplayUsermod : public Usermod {
|
||||
return true;
|
||||
} else type = newType;
|
||||
setup();
|
||||
needsRedraw |= true;
|
||||
if (sclPin >= 0 && sdaPin >= 0) {
|
||||
needsRedraw |= true;
|
||||
}
|
||||
}
|
||||
setContrast(contrast);
|
||||
setFlipMode(flip);
|
||||
|
||||
@ -76,7 +76,7 @@ private:
|
||||
unsigned char Enc_B;
|
||||
unsigned char Enc_A_prev = 0;
|
||||
|
||||
bool currentEffectAndPaleeteInitialized = false;
|
||||
bool currentEffectAndPaletteInitialized = false;
|
||||
uint8_t effectCurrentIndex = 0;
|
||||
uint8_t effectPaletteIndex = 0;
|
||||
|
||||
@ -97,9 +97,17 @@ public:
|
||||
*/
|
||||
void setup()
|
||||
{
|
||||
if (!pinManager.allocatePin(pinA)) { enabled = false; return;}
|
||||
if (!pinManager.allocatePin(pinB)) { pinManager.deallocatePin(pinA); enabled = false; return; }
|
||||
if (!pinManager.allocatePin(pinC)) { pinManager.deallocatePin(pinA); pinManager.deallocatePin(pinB); enabled = false; return; }
|
||||
PinManagerPinType pins[3] = { { pinA, false }, { pinB, false }, { pinC, false } };
|
||||
if (!pinManager.allocateMultiplePins(pins, 3, PinOwner::UM_RotaryEncoderUI)) {
|
||||
// BUG: configuring this usermod with conflicting pins
|
||||
// will cause it to de-allocate pins it does not own
|
||||
// (at second config)
|
||||
// This is the exact type of bug solved by pinManager
|
||||
// tracking the owner tags....
|
||||
pinA = pinB = pinC = -1;
|
||||
enabled = false;
|
||||
return;
|
||||
}
|
||||
|
||||
pinMode(pinA, INPUT_PULLUP);
|
||||
pinMode(pinB, INPUT_PULLUP);
|
||||
@ -152,7 +160,7 @@ public:
|
||||
// Initialize effectCurrentIndex and effectPaletteIndex to
|
||||
// current state. We do it here as (at least) effectCurrent
|
||||
// is not yet initialized when setup is called.
|
||||
if (!currentEffectAndPaleeteInitialized) {
|
||||
if (!currentEffectAndPaletteInitialized) {
|
||||
findCurrentEffectAndPalette();
|
||||
}
|
||||
|
||||
@ -248,7 +256,7 @@ public:
|
||||
}
|
||||
|
||||
void findCurrentEffectAndPalette() {
|
||||
currentEffectAndPaleeteInitialized = true;
|
||||
currentEffectAndPaletteInitialized = true;
|
||||
for (uint8_t i = 0; i < strip.getModeCount(); i++) {
|
||||
//byte value = modes_alpha_indexes[i];
|
||||
if (modes_alpha_indexes[i] == effectCurrent) {
|
||||
@ -455,9 +463,9 @@ public:
|
||||
DEBUG_PRINTLN(F(" config (re)loaded."));
|
||||
// changing parameters from settings page
|
||||
if (pinA!=newDTpin || pinB!=newCLKpin || pinC!=newSWpin) {
|
||||
pinManager.deallocatePin(pinA);
|
||||
pinManager.deallocatePin(pinB);
|
||||
pinManager.deallocatePin(pinC);
|
||||
pinManager.deallocatePin(pinA, PinOwner::UM_RotaryEncoderUI);
|
||||
pinManager.deallocatePin(pinB, PinOwner::UM_RotaryEncoderUI);
|
||||
pinManager.deallocatePin(pinC, PinOwner::UM_RotaryEncoderUI);
|
||||
pinA = newDTpin;
|
||||
pinB = newCLKpin;
|
||||
pinC = newSWpin;
|
||||
|
||||
@ -119,10 +119,10 @@ class BusDigital : public Bus {
|
||||
public:
|
||||
BusDigital(BusConfig &bc, uint8_t nr) : Bus(bc.type, bc.start) {
|
||||
if (!IS_DIGITAL(bc.type) || !bc.count) return;
|
||||
if (!pinManager.allocatePin(bc.pins[0])) return;
|
||||
if (!pinManager.allocatePin(bc.pins[0], true, PinOwner::BusDigital)) return;
|
||||
_pins[0] = bc.pins[0];
|
||||
if (IS_2PIN(bc.type)) {
|
||||
if (!pinManager.allocatePin(bc.pins[1])) {
|
||||
if (!pinManager.allocatePin(bc.pins[1], true, PinOwner::BusDigital)) {
|
||||
cleanup(); return;
|
||||
}
|
||||
_pins[1] = bc.pins[1];
|
||||
@ -206,8 +206,8 @@ class BusDigital : public Bus {
|
||||
_iType = I_NONE;
|
||||
_valid = false;
|
||||
_busPtr = nullptr;
|
||||
pinManager.deallocatePin(_pins[0]);
|
||||
pinManager.deallocatePin(_pins[1]);
|
||||
pinManager.deallocatePin(_pins[1], PinOwner::BusDigital);
|
||||
pinManager.deallocatePin(_pins[0], PinOwner::BusDigital);
|
||||
}
|
||||
|
||||
~BusDigital() {
|
||||
@ -242,7 +242,7 @@ class BusPwm : public Bus {
|
||||
|
||||
for (uint8_t i = 0; i < numPins; i++) {
|
||||
uint8_t currentPin = bc.pins[i];
|
||||
if (!pinManager.allocatePin(currentPin)) {
|
||||
if (!pinManager.allocatePin(currentPin, true, PinOwner::BusPwm)) {
|
||||
deallocatePins(); return;
|
||||
}
|
||||
_pins[i] = currentPin; // store only after allocatePin() succeeds
|
||||
@ -334,7 +334,7 @@ class BusPwm : public Bus {
|
||||
#else
|
||||
if (_ledcStart < 16) ledcDetachPin(_pins[i]);
|
||||
#endif
|
||||
pinManager.deallocatePin(_pins[i]);
|
||||
pinManager.deallocatePin(_pins[i], PinOwner::BusPwm);
|
||||
}
|
||||
#ifdef ARDUINO_ARCH_ESP32
|
||||
pinManager.deallocateLedc(_ledcStart, numPins);
|
||||
@ -457,4 +457,4 @@ class BusManager {
|
||||
uint8_t numBusses = 0;
|
||||
Bus* busses[WLED_MAX_BUSSES];
|
||||
};
|
||||
#endif
|
||||
#endif
|
||||
|
||||
@ -18,6 +18,13 @@ bool deserializeConfig(JsonObject doc, bool fromFS) {
|
||||
|
||||
//long vid = doc[F("vid")]; // 2010020
|
||||
|
||||
#ifdef WLED_USE_ETHERNET
|
||||
JsonObject ethernet = doc[F("eth")];
|
||||
CJSON(ethernetType, ethernet["type"]);
|
||||
// NOTE: Ethernet configuration takes priority over other use of pins
|
||||
WLED::instance().initEthernet();
|
||||
#endif
|
||||
|
||||
JsonObject id = doc["id"];
|
||||
getStringFromJson(cmDNS, id[F("mdns")], 33);
|
||||
getStringFromJson(serverDescription, id[F("name")], 33);
|
||||
@ -53,10 +60,6 @@ bool deserializeConfig(JsonObject doc, bool fromFS) {
|
||||
|
||||
CJSON(apBehavior, ap[F("behav")]);
|
||||
|
||||
#ifdef WLED_USE_ETHERNET
|
||||
JsonObject ethernet = doc[F("eth")];
|
||||
CJSON(ethernetType, ethernet["type"]);
|
||||
#endif
|
||||
|
||||
/*
|
||||
JsonArray ap_ip = ap["ip"];
|
||||
@ -71,7 +74,7 @@ bool deserializeConfig(JsonObject doc, bool fromFS) {
|
||||
|
||||
JsonObject hw = doc[F("hw")];
|
||||
|
||||
// initialize LED pins and lengths prior to other HW
|
||||
// initialize LED pins and lengths prior to other HW (except for ethernet)
|
||||
JsonObject hw_led = hw[F("led")];
|
||||
|
||||
CJSON(ledCount, hw_led[F("total")]);
|
||||
@ -130,7 +133,7 @@ bool deserializeConfig(JsonObject doc, bool fromFS) {
|
||||
for (JsonObject btn : hw_btn_ins) {
|
||||
CJSON(buttonType[s], btn["type"]);
|
||||
int8_t pin = btn["pin"][0] | -1;
|
||||
if (pin > -1 && pinManager.allocatePin(pin,false)) {
|
||||
if (pin > -1 && pinManager.allocatePin(pin, false, PinOwner::Button)) {
|
||||
btnPin[s] = pin;
|
||||
pinMode(btnPin[s], INPUT_PULLUP);
|
||||
} else {
|
||||
@ -155,7 +158,7 @@ bool deserializeConfig(JsonObject doc, bool fromFS) {
|
||||
if (fromFS) {
|
||||
// relies upon only being called once with fromFS == true, which is currently true.
|
||||
uint8_t s = 0;
|
||||
if (pinManager.allocatePin(btnPin[0],false)) { // initialized to #define value BTNPIN, or zero if not defined(!)
|
||||
if (pinManager.allocatePin(btnPin[0], false, PinOwner::Button)) { // initialized to #define value BTNPIN, or zero if not defined(!)
|
||||
++s; // do not clear default button if allocated successfully
|
||||
}
|
||||
for (; s<WLED_MAX_BUTTONS; s++) {
|
||||
@ -172,7 +175,7 @@ bool deserializeConfig(JsonObject doc, bool fromFS) {
|
||||
|
||||
int hw_ir_pin = hw["ir"]["pin"] | -2; // 4
|
||||
if (hw_ir_pin > -2) {
|
||||
if (pinManager.allocatePin(hw_ir_pin,false)) {
|
||||
if (pinManager.allocatePin(hw_ir_pin, false, PinOwner::IR)) {
|
||||
irPin = hw_ir_pin;
|
||||
} else {
|
||||
irPin = -1;
|
||||
@ -183,7 +186,7 @@ bool deserializeConfig(JsonObject doc, bool fromFS) {
|
||||
JsonObject relay = hw[F("relay")];
|
||||
int hw_relay_pin = relay["pin"] | -2;
|
||||
if (hw_relay_pin > -2) {
|
||||
if (pinManager.allocatePin(hw_relay_pin,true)) {
|
||||
if (pinManager.allocatePin(hw_relay_pin,true, PinOwner::Relay)) {
|
||||
rlyPin = hw_relay_pin;
|
||||
pinMode(rlyPin, OUTPUT);
|
||||
} else {
|
||||
@ -437,6 +440,8 @@ void deserializeConfigFromFS() {
|
||||
return;
|
||||
}
|
||||
|
||||
// NOTE: This routine deserializes *and* applies the configuration
|
||||
// Therefore, must also initialize ethernet from this function
|
||||
deserializeConfig(doc.as<JsonObject>(), true);
|
||||
}
|
||||
|
||||
|
||||
@ -291,7 +291,7 @@
|
||||
#ifdef ESP8266
|
||||
#define LEDPIN 2 // GPIO2 (D4) on Wemod D1 mini compatible boards
|
||||
#else
|
||||
#define LEDPIN 16 // alligns with GPIO2 (D4) on Wemos D1 mini32 compatible boards
|
||||
#define LEDPIN 16 // aligns with GPIO2 (D4) on Wemos D1 mini32 compatible boards
|
||||
#endif
|
||||
#endif
|
||||
|
||||
|
||||
@ -359,7 +359,7 @@ void _drawOverlayCronixie()
|
||||
}
|
||||
|
||||
#else // WLED_DISABLE_CRONIXIE
|
||||
byte getSameCodeLength(char code, int index, char const cronixieDisplay[]) {}
|
||||
byte getSameCodeLength(char code, int index, char const cronixieDisplay[]) { return 0; }
|
||||
void setCronixie() {}
|
||||
void _overlayCronixie() {}
|
||||
void _drawOverlayCronixie() {}
|
||||
|
||||
@ -1,35 +1,110 @@
|
||||
#include "pin_manager.h"
|
||||
#include "wled.h"
|
||||
|
||||
void PinManagerClass::deallocatePin(byte gpio)
|
||||
static void DebugPrintOwnerTag(PinOwner tag)
|
||||
{
|
||||
if (!isPinOk(gpio, false)) return;
|
||||
uint32_t q = static_cast<uint8_t>(tag);
|
||||
if (q) {
|
||||
DEBUG_PRINTF("0x%02x (%d)", q, q);
|
||||
} else {
|
||||
DEBUG_PRINT(F("(no owner)"));
|
||||
}
|
||||
}
|
||||
|
||||
/// Actual allocation/deallocation routines
|
||||
bool PinManagerClass::deallocatePin(byte gpio, PinOwner tag)
|
||||
{
|
||||
if (gpio == 0xFF) return true; // explicitly allow clients to free -1 as a no-op
|
||||
if (!isPinOk(gpio, false)) return false; // but return false for any other invalid pin
|
||||
|
||||
// if a non-zero ownerTag, only allow de-allocation if the owner's tag is provided
|
||||
if ((ownerTag[gpio] != PinOwner::None) && (ownerTag[gpio] != tag)) {
|
||||
DEBUG_PRINT(F("PIN DEALLOC: IO "));
|
||||
DEBUG_PRINT(gpio);
|
||||
DEBUG_PRINT(F(" allocated by "));
|
||||
DebugPrintOwnerTag(ownerTag[gpio]);
|
||||
DEBUG_PRINT(F(", but attempted de-allocation by "));
|
||||
DebugPrintOwnerTag(tag);
|
||||
return false;
|
||||
}
|
||||
|
||||
byte by = gpio >> 3;
|
||||
byte bi = gpio - 8*by;
|
||||
bitWrite(pinAlloc[by], bi, false);
|
||||
ownerTag[gpio] = PinOwner::None;
|
||||
return true;
|
||||
}
|
||||
bool PinManagerClass::allocateMultiplePins(const managed_pin_type * mptArray, byte arrayElementCount, PinOwner tag)
|
||||
{
|
||||
bool shouldFail = false;
|
||||
// first verify the pins are OK and not already allocated
|
||||
for (int i = 0; i < arrayElementCount; i++) {
|
||||
byte gpio = mptArray[i].pin;
|
||||
if (gpio == 0xFF) {
|
||||
// explicit support for io -1 as a no-op (no allocation of pin),
|
||||
// as this can greatly simplify configuration arrays
|
||||
continue;
|
||||
}
|
||||
if (!isPinOk(gpio, mptArray[i].isOutput)) {
|
||||
DEBUG_PRINT(F("PIN ALLOC: Invalid pin attempted to be allocated: "));
|
||||
DEBUG_PRINT(gpio);
|
||||
DEBUG_PRINTLN(F(""));
|
||||
shouldFail = true;
|
||||
}
|
||||
if (isPinAllocated(gpio)) {
|
||||
DEBUG_PRINT(F("PIN ALLOC: FAIL: IO "));
|
||||
DEBUG_PRINT(gpio);
|
||||
DEBUG_PRINT(F(" already allocated by "));
|
||||
DebugPrintOwnerTag(ownerTag[gpio]);
|
||||
DEBUG_PRINTLN(F(""));
|
||||
shouldFail = true;
|
||||
}
|
||||
}
|
||||
if (shouldFail) {
|
||||
return false;
|
||||
}
|
||||
|
||||
bool PinManagerClass::allocatePin(byte gpio, bool output)
|
||||
// all pins are available .. track each one
|
||||
for (int i = 0; i < arrayElementCount; i++) {
|
||||
byte gpio = mptArray[i].pin;
|
||||
if (gpio == 0xFF) {
|
||||
// allow callers to include -1 value as non-requested pin
|
||||
// as this can greatly simplify configuration arrays
|
||||
continue;
|
||||
}
|
||||
byte by = gpio >> 3;
|
||||
byte bi = gpio - 8*by;
|
||||
bitWrite(pinAlloc[by], bi, true);
|
||||
ownerTag[gpio] = tag;
|
||||
}
|
||||
return true;
|
||||
}
|
||||
bool PinManagerClass::allocatePin(byte gpio, bool output, PinOwner tag)
|
||||
{
|
||||
if (!isPinOk(gpio, output)) return false;
|
||||
if (isPinAllocated(gpio)) {
|
||||
DEBUG_PRINT(F("Attempted duplicate allocation of pin "));
|
||||
DEBUG_PRINTLN(gpio);
|
||||
DEBUG_PRINT(F("PIN ALLOC: Pin "));
|
||||
DEBUG_PRINT(gpio);
|
||||
DEBUG_PRINT(F(" already allocated by "));
|
||||
DebugPrintOwnerTag(ownerTag[gpio]);
|
||||
DEBUG_PRINTLN(F(""));
|
||||
return false;
|
||||
}
|
||||
|
||||
byte by = gpio >> 3;
|
||||
byte bi = gpio - 8*by;
|
||||
bitWrite(pinAlloc[by], bi, true);
|
||||
ownerTag[gpio] = tag;
|
||||
|
||||
return true;
|
||||
}
|
||||
|
||||
bool PinManagerClass::isPinAllocated(byte gpio)
|
||||
// if tag is set to PinOwner::None, checks for ANY owner of the pin.
|
||||
// if tag is set to any other value, checks if that tag is the current owner of the pin.
|
||||
bool PinManagerClass::isPinAllocated(byte gpio, PinOwner tag)
|
||||
{
|
||||
if (!isPinOk(gpio, false)) return true;
|
||||
|
||||
if ((tag != PinOwner::None) && (ownerTag[gpio] != tag)) return false;
|
||||
byte by = gpio >> 3;
|
||||
byte bi = gpio - 8*by;
|
||||
return bitRead(pinAlloc[by], bi);
|
||||
@ -46,7 +121,7 @@ bool PinManagerClass::isPinOk(byte gpio, bool output)
|
||||
if (gpio < 34) return true;
|
||||
if (gpio < 40 && !output) return true; //34-39 input only
|
||||
#endif
|
||||
|
||||
|
||||
return false;
|
||||
}
|
||||
|
||||
@ -88,4 +163,4 @@ void PinManagerClass::deallocateLedc(byte pos, byte channels)
|
||||
}
|
||||
#endif
|
||||
|
||||
PinManagerClass pinManager = PinManagerClass();
|
||||
PinManagerClass pinManager = PinManagerClass();
|
||||
|
||||
@ -4,21 +4,93 @@
|
||||
* Registers pins so there is no attempt for two interfaces to use the same pin
|
||||
*/
|
||||
#include <Arduino.h>
|
||||
#include "const.h" // for USERMOD_* values
|
||||
|
||||
typedef struct PinManagerPinType {
|
||||
int8_t pin;
|
||||
uint8_t isOutput;
|
||||
} managed_pin_type;
|
||||
|
||||
/*
|
||||
* Allows PinManager to "lock" an allocation to a specific
|
||||
* owner, so someone else doesn't accidentally de-allocate
|
||||
* a pin it hasn't allocated. Also enhances debugging.
|
||||
*
|
||||
* RAM Cost:
|
||||
* 17 bytes on ESP8266
|
||||
* 40 bytes on ESP32
|
||||
*/
|
||||
enum struct PinOwner : uint8_t {
|
||||
None = 0, // default == legacy == unspecified owner
|
||||
// High bit is set for all built-in pin owners
|
||||
// StatusLED -- THIS SHOULD NEVER BE ALLOCATED -- see handleStatusLED()
|
||||
Ethernet = 0x81,
|
||||
BusDigital = 0x82,
|
||||
BusDigital2 = 0x83,
|
||||
BusPwm = 0x84, // 'BusP' == PWM output using BusPwm
|
||||
Button = 0x85, // 'Butn' == button from configuration
|
||||
IR = 0x86, // 'IR' == IR receiver pin from configuration
|
||||
Relay = 0x87, // 'Rly' == Relay pin from configuration
|
||||
SPI_RAM = 0x88, // 'SpiR' == SPI RAM
|
||||
DebugOut = 0x89, // 'Dbg' == debug output always IO1
|
||||
DMX = 0x8A, // 'DMX' == hard-coded to IO2
|
||||
// Use UserMod IDs from const.h here
|
||||
UM_Unspecified = USERMOD_ID_UNSPECIFIED, // 0x01
|
||||
UM_RGBRotaryEncoder = USERMOD_ID_UNSPECIFIED, // 0x01 // No define in const.h for this user module -- consider adding?
|
||||
UM_Example = USERMOD_ID_EXAMPLE, // 0x02 // Usermod "usermod_v2_example.h"
|
||||
UM_Temperature = USERMOD_ID_TEMPERATURE, // 0x03 // Usermod "usermod_temperature.h"
|
||||
// #define USERMOD_ID_FIXNETSERVICES // 0x04 // Usermod "usermod_Fix_unreachable_netservices.h" -- Does not allocate pins
|
||||
UM_PIR = USERMOD_ID_PIRSWITCH, // 0x05 // Usermod "usermod_PIR_sensor_switch.h"
|
||||
// #define USERMOD_ID_IMU // 0x06 // Usermod "usermod_mpu6050_imu.h" -- Uses "standard" I2C pins ... TODO -- enable shared I2C bus use
|
||||
UM_FourLineDisplay = USERMOD_ID_FOUR_LINE_DISP, // 0x07 // Usermod "usermod_v2_four_line_display.h
|
||||
UM_RotaryEncoderUI = USERMOD_ID_ROTARY_ENC_UI, // 0x08 // Usermod "usermod_v2_rotary_encoder_ui.h"
|
||||
// #define USERMOD_ID_AUTO_SAVE // 0x09 // Usermod "usermod_v2_auto_save.h" -- Does not allocate pins
|
||||
// #define USERMOD_ID_DHT // 0x0A // Usermod "usermod_dht.h" -- Statically allocates pins, not compatible with pinManager?
|
||||
// #define USERMOD_ID_MODE_SORT // 0x0B // Usermod "usermod_v2_mode_sort.h" -- Does not allocate pins
|
||||
// #define USERMOD_ID_VL53L0X // 0x0C // Usermod "usermod_vl53l0x_gestures.h" -- Uses "standard" I2C pins ... TODO -- enable shared I2C bus use
|
||||
UM_MultiRelay = USERMOD_ID_MULTI_RELAY, // 0x0D // Usermod "usermod_multi_relay.h"
|
||||
UM_AnimatedStaircase = USERMOD_ID_ANIMATED_STAIRCASE, // 0x0E // Usermod "Animated_Staircase.h"
|
||||
// #define USERMOD_ID_RTC // 0x0F // Usermod "usermod_rtc.h" -- Uses "standard" I2C pins ... TODO -- enable shared I2C bus use
|
||||
// #define USERMOD_ID_ELEKSTUBE_IPS // 0x10 // Usermod "usermod_elekstube_ips.h" -- Uses quite a few pins ... see Hardware.h and User_Setup.h
|
||||
// #define USERMOD_ID_SN_PHOTORESISTOR // 0x11 // Usermod "usermod_sn_photoresistor.h" -- Uses hard-coded pin (PHOTORESISTOR_PIN == A0), but could be easily updated to use pinManager
|
||||
};
|
||||
static_assert(0u == static_cast<uint8_t>(PinOwner::None), "PinOwner::None must be zero, so default array initialization works as expected");
|
||||
|
||||
class PinManagerClass {
|
||||
private:
|
||||
#ifdef ESP8266
|
||||
uint8_t pinAlloc[3] = {0x00, 0x00, 0x00}; //24bit, 1 bit per pin, we use first 17bits
|
||||
PinOwner ownerTag[17] = { PinOwner::None };
|
||||
#else
|
||||
uint8_t pinAlloc[5] = {0x00, 0x00, 0x00, 0x00, 0x00}; //40bit, 1 bit per pin, we use all bits
|
||||
uint8_t ledcAlloc[2] = {0x00, 0x00}; //16 LEDC channels
|
||||
PinOwner ownerTag[40] = { PinOwner::None };
|
||||
#endif
|
||||
|
||||
public:
|
||||
void deallocatePin(byte gpio);
|
||||
bool allocatePin(byte gpio, bool output = true);
|
||||
bool isPinAllocated(byte gpio);
|
||||
// De-allocates a single pin
|
||||
bool deallocatePin(byte gpio, PinOwner tag);
|
||||
// Allocates a single pin, with an owner tag.
|
||||
// De-allocation requires the same owner tag (or override)
|
||||
bool allocatePin(byte gpio, bool output, PinOwner tag);
|
||||
// Allocates all the pins, or allocates none of the pins, with owner tag.
|
||||
// Provided to simplify error condition handling in clients
|
||||
// using more than one pin, such as I2C, SPI, rotary encoders,
|
||||
// ethernet, etc..
|
||||
bool allocateMultiplePins(const managed_pin_type * mptArray, byte arrayElementCount, PinOwner tag );
|
||||
|
||||
#if !defined(ESP8266) // ESP8266 compiler doesn't understand deprecated attribute
|
||||
[[deprecated("Replaced by three-parameter allocatePin(gpio, output, ownerTag), for improved debugging")]]
|
||||
#endif
|
||||
inline bool allocatePin(byte gpio, bool output = true) { return allocatePin(gpio, output, PinOwner::None); }
|
||||
#if !defined(ESP8266) // ESP8266 compiler doesn't understand deprecated attribute
|
||||
[[deprecated("Replaced by three-parameter deallocatePin(gpio, output, ownerTag), for improved debugging")]]
|
||||
#endif
|
||||
inline void deallocatePin(byte gpio) { deallocatePin(gpio, PinOwner::None); }
|
||||
|
||||
bool isPinAllocated(byte gpio, PinOwner tag = PinOwner::None);
|
||||
bool isPinOk(byte gpio, bool output = true);
|
||||
|
||||
#ifdef ARDUINO_ARCH_ESP32
|
||||
byte allocateLedc(byte channels);
|
||||
void deallocateLedc(byte pos, byte channels);
|
||||
@ -26,4 +98,4 @@ class PinManagerClass {
|
||||
};
|
||||
|
||||
extern PinManagerClass pinManager;
|
||||
#endif
|
||||
#endif
|
||||
|
||||
@ -54,6 +54,7 @@ void handleSettingsSet(AsyncWebServerRequest *request, byte subPage)
|
||||
|
||||
#ifdef WLED_USE_ETHERNET
|
||||
ethernetType = request->arg(F("ETH")).toInt();
|
||||
WLED::instance().initEthernet();
|
||||
#endif
|
||||
|
||||
char k[3]; k[2] = 0;
|
||||
@ -77,11 +78,17 @@ void handleSettingsSet(AsyncWebServerRequest *request, byte subPage)
|
||||
{
|
||||
int t = 0;
|
||||
|
||||
if (rlyPin>=0 && pinManager.isPinAllocated(rlyPin)) pinManager.deallocatePin(rlyPin);
|
||||
if (irPin>=0 && pinManager.isPinAllocated(irPin)) pinManager.deallocatePin(irPin);
|
||||
for (uint8_t s=0; s<WLED_MAX_BUTTONS; s++)
|
||||
if (btnPin[s]>=0 && pinManager.isPinAllocated(btnPin[s]))
|
||||
pinManager.deallocatePin(btnPin[s]);
|
||||
if (rlyPin>=0 && pinManager.isPinAllocated(rlyPin, PinOwner::Relay)) {
|
||||
pinManager.deallocatePin(rlyPin, PinOwner::Relay);
|
||||
}
|
||||
if (irPin>=0 && pinManager.isPinAllocated(irPin, PinOwner::IR)) {
|
||||
pinManager.deallocatePin(irPin, PinOwner::IR);
|
||||
}
|
||||
for (uint8_t s=0; s<WLED_MAX_BUTTONS; s++) {
|
||||
if (btnPin[s]>=0 && pinManager.isPinAllocated(btnPin[s], PinOwner::Button)) {
|
||||
pinManager.deallocatePin(btnPin[s], PinOwner::Button);
|
||||
}
|
||||
}
|
||||
|
||||
strip.isRgbw = false;
|
||||
uint8_t colorOrder, type, skip;
|
||||
@ -127,7 +134,7 @@ void handleSettingsSet(AsyncWebServerRequest *request, byte subPage)
|
||||
|
||||
// upate other pins
|
||||
int hw_ir_pin = request->arg(F("IR")).toInt();
|
||||
if (pinManager.allocatePin(hw_ir_pin,false)) {
|
||||
if (pinManager.allocatePin(hw_ir_pin,false, PinOwner::IR)) {
|
||||
irPin = hw_ir_pin;
|
||||
} else {
|
||||
irPin = -1;
|
||||
@ -135,7 +142,7 @@ void handleSettingsSet(AsyncWebServerRequest *request, byte subPage)
|
||||
irEnabled = request->arg(F("IT")).toInt();
|
||||
|
||||
int hw_rly_pin = request->arg(F("RL")).toInt();
|
||||
if (pinManager.allocatePin(hw_rly_pin,true)) {
|
||||
if (pinManager.allocatePin(hw_rly_pin,true, PinOwner::Relay)) {
|
||||
rlyPin = hw_rly_pin;
|
||||
} else {
|
||||
rlyPin = -1;
|
||||
@ -146,7 +153,7 @@ void handleSettingsSet(AsyncWebServerRequest *request, byte subPage)
|
||||
char bt[4] = "BT"; bt[2] = 48+i; bt[3] = 0; // button pin
|
||||
char be[4] = "BE"; be[2] = 48+i; be[3] = 0; // button type
|
||||
int hw_btn_pin = request->arg(bt).toInt();
|
||||
if (pinManager.allocatePin(hw_btn_pin,false)) {
|
||||
if (pinManager.allocatePin(hw_btn_pin,false,PinOwner::Button)) {
|
||||
btnPin[i] = hw_btn_pin;
|
||||
pinMode(btnPin[i], INPUT_PULLUP);
|
||||
buttonType[i] = request->arg(be).toInt();
|
||||
|
||||
188
wled00/wled.cpp
188
wled00/wled.cpp
@ -105,6 +105,11 @@ void WiFiEvent(WiFiEvent_t event)
|
||||
break;
|
||||
case SYSTEM_EVENT_ETH_DISCONNECTED:
|
||||
DEBUG_PRINT(F("ETH Disconnected"));
|
||||
// This doesn't really affect ethernet per se,
|
||||
// as it's only configured once. Rather, it
|
||||
// may be necessary to reconnect the WiFi when
|
||||
// ethernet disconnects, as a way to provide
|
||||
// alternative access to the device.
|
||||
forceReconnect = true;
|
||||
break;
|
||||
#endif
|
||||
@ -275,20 +280,21 @@ void WLED::setup()
|
||||
registerUsermods();
|
||||
|
||||
#if defined(ARDUINO_ARCH_ESP32) && defined(WLED_USE_PSRAM)
|
||||
if (psramFound()) {
|
||||
pinManager.allocatePin(16); // GPIO16 reserved for SPI RAM
|
||||
pinManager.allocatePin(17); // GPIO17 reserved for SPI RAM
|
||||
}
|
||||
if (psramFound()) {
|
||||
// GPIO16/GPIO17 reserved for SPI RAM
|
||||
managed_pin_type pins[2] = { {16, true}, {17, true} };
|
||||
pinManager.allocateMultiplePins(pins, 2, PinOwner::SPI_RAM);
|
||||
}
|
||||
#endif
|
||||
|
||||
//DEBUG_PRINT(F("LEDs inited. heap usage ~"));
|
||||
//DEBUG_PRINTLN(heapPreAlloc - ESP.getFreeHeap());
|
||||
|
||||
#ifdef WLED_DEBUG
|
||||
pinManager.allocatePin(1,true); // GPIO1 reserved for debug output
|
||||
pinManager.allocatePin(1, true, PinOwner::DebugOut); // GPIO1 reserved for debug output
|
||||
#endif
|
||||
#ifdef WLED_USE_DMX //reserve GPIO2 as hardcoded DMX pin
|
||||
pinManager.allocatePin(2);
|
||||
pinManager.allocatePin(2, true, PinOwner::DMX);
|
||||
#endif
|
||||
|
||||
for (uint8_t i=1; i<WLED_MAX_BUTTONS; i++) btnPin[i] = -1;
|
||||
@ -310,7 +316,11 @@ void WLED::setup()
|
||||
deserializeConfigFromFS();
|
||||
|
||||
#if STATUSLED
|
||||
if (!pinManager.isPinAllocated(STATUSLED)) pinMode(STATUSLED, OUTPUT);
|
||||
if (!pinManager.isPinAllocated(STATUSLED)) {
|
||||
// NOTE: Special case: The status LED should *NOT* be allocated.
|
||||
// See comments in handleStatusLed().
|
||||
pinMode(STATUSLED, OUTPUT);
|
||||
}
|
||||
#endif
|
||||
|
||||
DEBUG_PRINTLN(F("Initializing strip"));
|
||||
@ -436,72 +446,97 @@ void WLED::initAP(bool resetAP)
|
||||
apActive = true;
|
||||
}
|
||||
|
||||
bool WLED::initEthernet()
|
||||
{
|
||||
#if defined(ARDUINO_ARCH_ESP32) && defined(WLED_USE_ETHERNET)
|
||||
|
||||
static bool successfullyConfiguredEthernet = false;
|
||||
|
||||
if (successfullyConfiguredEthernet) {
|
||||
// DEBUG_PRINTLN(F("initE: ETH already successfully configured, ignoring"));
|
||||
return false;
|
||||
}
|
||||
if (ethernetType == WLED_ETH_NONE) {
|
||||
return false;
|
||||
}
|
||||
if (ethernetType >= WLED_NUM_ETH_TYPES) {
|
||||
DEBUG_PRINT(F("initE: Ignoring attempt for invalid ethernetType ")); DEBUG_PRINTLN(ethernetType);
|
||||
return false;
|
||||
}
|
||||
|
||||
DEBUG_PRINT(F("initE: Attempting ETH config: ")); DEBUG_PRINTLN(ethernetType);
|
||||
|
||||
// Ethernet initialization should only succeed once -- else reboot required
|
||||
ethernet_settings es = ethernetBoards[ethernetType];
|
||||
managed_pin_type pinsToAllocate[10] = {
|
||||
// first six pins are non-configurable
|
||||
esp32_nonconfigurable_ethernet_pins[0],
|
||||
esp32_nonconfigurable_ethernet_pins[1],
|
||||
esp32_nonconfigurable_ethernet_pins[2],
|
||||
esp32_nonconfigurable_ethernet_pins[3],
|
||||
esp32_nonconfigurable_ethernet_pins[4],
|
||||
esp32_nonconfigurable_ethernet_pins[5],
|
||||
{ (int8_t)es.eth_mdc, true }, // [6] = MDC is output and mandatory
|
||||
{ (int8_t)es.eth_mdio, true }, // [7] = MDIO is bidirectional and mandatory
|
||||
{ (int8_t)es.eth_power, true }, // [8] = optional pin, not all boards use
|
||||
{ ((int8_t)0xFE), false }, // [9] = replaced with eth_clk_mode, mandatory
|
||||
};
|
||||
// update the clock pin....
|
||||
if (es.eth_clk_mode == ETH_CLOCK_GPIO0_IN) {
|
||||
pinsToAllocate[9].pin = 0;
|
||||
pinsToAllocate[9].isOutput = false;
|
||||
} else if (es.eth_clk_mode == ETH_CLOCK_GPIO0_OUT) {
|
||||
pinsToAllocate[9].pin = 0;
|
||||
pinsToAllocate[9].isOutput = true;
|
||||
} else if (es.eth_clk_mode == ETH_CLOCK_GPIO16_OUT) {
|
||||
pinsToAllocate[9].pin = 16;
|
||||
pinsToAllocate[9].isOutput = true;
|
||||
} else if (es.eth_clk_mode == ETH_CLOCK_GPIO17_OUT) {
|
||||
pinsToAllocate[9].pin = 17;
|
||||
pinsToAllocate[9].isOutput = true;
|
||||
} else {
|
||||
DEBUG_PRINT(F("initE: Failing due to invalid eth_clk_mode ("));
|
||||
DEBUG_PRINT(es.eth_clk_mode);
|
||||
DEBUG_PRINTLN(F(")"));
|
||||
return false;
|
||||
}
|
||||
|
||||
if (!pinManager.allocateMultiplePins(pinsToAllocate, 10, PinOwner::Ethernet)) {
|
||||
DEBUG_PRINTLN(F("initE: Failed to allocate ethernet pins"));
|
||||
return false;
|
||||
}
|
||||
|
||||
if (!ETH.begin(
|
||||
(uint8_t) es.eth_address,
|
||||
(int) es.eth_power,
|
||||
(int) es.eth_mdc,
|
||||
(int) es.eth_mdio,
|
||||
(eth_phy_type_t) es.eth_type,
|
||||
(eth_clock_mode_t) es.eth_clk_mode
|
||||
)) {
|
||||
DEBUG_PRINTLN(F("initC: ETH.begin() failed"));
|
||||
// de-allocate the allocated pins
|
||||
for (managed_pin_type mpt : pinsToAllocate) {
|
||||
pinManager.deallocatePin(mpt.pin, PinOwner::Ethernet);
|
||||
}
|
||||
return false;
|
||||
}
|
||||
|
||||
successfullyConfiguredEthernet = true;
|
||||
DEBUG_PRINTLN(F("initC: *** Ethernet successfully configured! ***"));
|
||||
return true;
|
||||
#else
|
||||
return false; // Ethernet not enabled for build
|
||||
#endif
|
||||
|
||||
}
|
||||
|
||||
void WLED::initConnection()
|
||||
{
|
||||
#ifdef WLED_ENABLE_WEBSOCKETS
|
||||
ws.onEvent(wsEvent);
|
||||
#endif
|
||||
|
||||
#if defined(ARDUINO_ARCH_ESP32) && defined(WLED_USE_ETHERNET)
|
||||
// Only initialize ethernet board if not NONE
|
||||
if (ethernetType != WLED_ETH_NONE && ethernetType < WLED_NUM_ETH_TYPES) {
|
||||
ethernet_settings es = ethernetBoards[ethernetType];
|
||||
// Use PinManager to ensure pins are available for
|
||||
// ethernet AND to prevent other uses of these pins.
|
||||
bool s = true;
|
||||
byte pinsAllocated[4] { 255, 255, 255, 255 };
|
||||
|
||||
if (s && (s = pinManager.allocatePin((byte)es.eth_power))) {
|
||||
pinsAllocated[0] = (byte)es.eth_power;
|
||||
}
|
||||
if (s && (s = pinManager.allocatePin((byte)es.eth_mdc))) {
|
||||
pinsAllocated[1] = (byte)es.eth_mdc;
|
||||
}
|
||||
if (s && (s = pinManager.allocatePin((byte)es.eth_mdio))) {
|
||||
pinsAllocated[2] = (byte)es.eth_mdio;
|
||||
}
|
||||
switch(es.eth_clk_mode) {
|
||||
case ETH_CLOCK_GPIO0_IN:
|
||||
s = pinManager.allocatePin(0, false);
|
||||
pinsAllocated[3] = 0;
|
||||
break;
|
||||
case ETH_CLOCK_GPIO0_OUT:
|
||||
s = pinManager.allocatePin(0);
|
||||
pinsAllocated[3] = 0;
|
||||
break;
|
||||
case ETH_CLOCK_GPIO16_OUT:
|
||||
s = pinManager.allocatePin(16);
|
||||
pinsAllocated[3] = 16;
|
||||
break;
|
||||
case ETH_CLOCK_GPIO17_OUT:
|
||||
s = pinManager.allocatePin(17);
|
||||
pinsAllocated[3] = 17;
|
||||
break;
|
||||
default:
|
||||
s = false;
|
||||
break;
|
||||
}
|
||||
|
||||
if (s) {
|
||||
s = ETH.begin(
|
||||
(uint8_t) es.eth_address,
|
||||
(int) es.eth_power,
|
||||
(int) es.eth_mdc,
|
||||
(int) es.eth_mdio,
|
||||
(eth_phy_type_t) es.eth_type,
|
||||
(eth_clock_mode_t) es.eth_clk_mode
|
||||
);
|
||||
}
|
||||
|
||||
if (!s) {
|
||||
DEBUG_PRINTLN(F("Ethernet init failed"));
|
||||
// de-allocate only those pins allocated before the failure
|
||||
for (byte p : pinsAllocated) {
|
||||
pinManager.deallocatePin(p);
|
||||
}
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
WiFi.disconnect(true); // close old connections
|
||||
#ifdef ESP8266
|
||||
@ -509,7 +544,7 @@ void WLED::initConnection()
|
||||
#endif
|
||||
|
||||
if (staticIP[0] != 0 && staticGateway[0] != 0) {
|
||||
WiFi.config(staticIP, staticGateway, staticSubnet, IPAddress(8, 8, 8, 8));
|
||||
WiFi.config(staticIP, staticGateway, staticSubnet, IPAddress(1, 1, 1, 1));
|
||||
} else {
|
||||
WiFi.config(0U, 0U, 0U);
|
||||
}
|
||||
@ -692,14 +727,25 @@ void WLED::handleConnection()
|
||||
}
|
||||
}
|
||||
|
||||
// If status LED pin is allocated for other uses, does nothing
|
||||
// else blink at 1Hz when WLED_CONNECTED is false (no WiFi, ?? no Ethernet ??)
|
||||
// else blink at 2Hz when MQTT is enabled but not connected
|
||||
// else turn the status LED off
|
||||
void WLED::handleStatusLED()
|
||||
{
|
||||
#if STATUSLED
|
||||
if (pinManager.isPinAllocated(STATUSLED)) return; //lower priority if something else uses the same pin
|
||||
static unsigned long ledStatusLastMillis = 0;
|
||||
static unsigned short ledStatusType = 0; // current status type - corresponds to number of blinks per second
|
||||
static bool ledStatusState = 0; // the current LED state
|
||||
|
||||
if (pinManager.isPinAllocated(STATUSLED)) {
|
||||
return; //lower priority if something else uses the same pin
|
||||
}
|
||||
|
||||
ledStatusType = WLED_CONNECTED ? 0 : 2;
|
||||
if (mqttEnabled && ledStatusType != 2) // Wi-Fi takes presendence over MQTT
|
||||
if (mqttEnabled && ledStatusType != 2) { // Wi-Fi takes precendence over MQTT
|
||||
ledStatusType = WLED_MQTT_CONNECTED ? 0 : 4;
|
||||
}
|
||||
if (ledStatusType) {
|
||||
if (millis() - ledStatusLastMillis >= (1000/ledStatusType)) {
|
||||
ledStatusLastMillis = millis();
|
||||
@ -715,4 +761,4 @@ void WLED::handleStatusLED()
|
||||
|
||||
}
|
||||
#endif
|
||||
}
|
||||
}
|
||||
|
||||
@ -594,12 +594,6 @@ WLED_GLOBAL bool doInitBusses _INIT(false);
|
||||
// Usermod manager
|
||||
WLED_GLOBAL UsermodManager usermods _INIT(UsermodManager());
|
||||
|
||||
// Status LED
|
||||
#if STATUSLED
|
||||
WLED_GLOBAL unsigned long ledStatusLastMillis _INIT(0);
|
||||
WLED_GLOBAL unsigned short ledStatusType _INIT(0); // current status type - corresponds to number of blinks per second
|
||||
WLED_GLOBAL bool ledStatusState _INIT(0); // the current LED state
|
||||
#endif
|
||||
|
||||
// enable additional debug output
|
||||
#ifdef WLED_DEBUG
|
||||
@ -663,6 +657,7 @@ public:
|
||||
|
||||
void beginStrip();
|
||||
void handleConnection();
|
||||
bool initEthernet(); // result is informational
|
||||
void initAP(bool resetAP = false);
|
||||
void initConnection();
|
||||
void initInterfaces();
|
||||
|
||||
@ -2,7 +2,32 @@
|
||||
#define WLED_ETHERNET_H
|
||||
|
||||
#ifdef WLED_USE_ETHERNET
|
||||
// settings for various ethernet boards
|
||||
#include "pin_manager.h"
|
||||
|
||||
// The following six pins are neither configurable nor
|
||||
// can they be re-assigned through IOMUX / GPIO matrix.
|
||||
// See https://docs.espressif.com/projects/esp-idf/en/latest/esp32/hw-reference/esp32/get-started-ethernet-kit-v1.1.html#ip101gri-phy-interface
|
||||
const managed_pin_type esp32_nonconfigurable_ethernet_pins[6] = {
|
||||
{ 21, true }, // RMII EMAC TX EN == When high, clocks the data on TXD0 and TXD1 to transmitter
|
||||
{ 19, true }, // RMII EMAC TXD0 == First bit of transmitted data
|
||||
{ 22, true }, // RMII EMAC TXD1 == Second bit of transmitted data
|
||||
{ 25, false }, // RMII EMAC RXD0 == First bit of received data
|
||||
{ 26, false }, // RMII EMAC RXD1 == Second bit of received data
|
||||
{ 27, true }, // RMII EMAC CRS_DV == Carrier Sense and RX Data Valid
|
||||
};
|
||||
|
||||
// For ESP32, the remaining five pins are at least somewhat configurable.
|
||||
// eth_address is in range [0..31], indicates which PHY (MAC?) address should be allocated to the interface
|
||||
// eth_power is an output GPIO pin used to enable/disable the ethernet port (and/or external oscillator)
|
||||
// eth_mdc is an output GPIO pin used to provide the clock for the management data
|
||||
// eth_mdio is an input/output GPIO pin used to transfer management data
|
||||
// eth_type is the physical ethernet module's type (ETH_PHY_LAN8720, ETH_PHY_TLK110)
|
||||
// eth_clk_mode defines the GPIO pin and GPIO mode for the clock signal
|
||||
// However, there are really only four configurable options on ESP32:
|
||||
// ETH_CLOCK_GPIO0_IN == External oscillator, clock input via GPIO0
|
||||
// ETH_CLOCK_GPIO0_OUT == ESP32 provides 50MHz clock output via GPIO0
|
||||
// ETH_CLOCK_GPIO16_OUT == ESP32 provides 50MHz clock output via GPIO16
|
||||
// ETH_CLOCK_GPIO17_OUT == ESP32 provides 50MHz clock output via GPIO17
|
||||
typedef struct EthernetSettings {
|
||||
uint8_t eth_address;
|
||||
int eth_power;
|
||||
@ -18,18 +43,9 @@ ethernet_settings ethernetBoards[] = {
|
||||
},
|
||||
|
||||
// WT32-EHT01
|
||||
// Please note, from my testing only these pins work for LED outputs:
|
||||
// IO2, IO4, IO12, IO14, IO15
|
||||
// Pins IO34 through IO39 are input-only on ESP32, so
|
||||
// the following exposed pins won't work to drive WLEDs
|
||||
// IO35(*), IO36, IO39
|
||||
// The following pins are also exposed via the headers,
|
||||
// and likely can be used as general purpose IO:
|
||||
// IO05(*), IO32 (CFG), IO33 (485_EN), IO33 (TXD)
|
||||
//
|
||||
// (*) silkscreen on board revision v1.2 may be wrong:
|
||||
// IO5 silkscreen on v1.2 says IO35
|
||||
// IO35 silkscreen on v1.2 says RXD
|
||||
// (*) NOTE: silkscreen on board revision v1.2 may be wrong:
|
||||
// silkscreen on v1.2 says IO35, but appears to be IO5
|
||||
// silkscreen on v1.2 says RXD, and appears to be IO35
|
||||
{
|
||||
1, // eth_address,
|
||||
16, // eth_power,
|
||||
|
||||
Loading…
Reference in New Issue
Block a user