lba.gitea/WLED
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Compile time options for Multi Relay & PWM Fan

Browse Source
This commit is contained in:
Blaz Kristan 2022-04-29 09:56:48 +02:00
parent 1a513c7bbf
commit 23d39e5366
4 changed files with 21 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
usermods/PWM_fan/readme.md
View File

@ -19,8 +19,8 @@ You will also need `-D USERMOD_DALLASTEMPERATURE`.
All of the parameters are configured during run-time using Usermods settings page.
This includes:
* PWM output pin
* tacho input pin
* PWM output pin (can be configured at compile time `-D PWM_PIN=xx`)
* tacho input pin (can be configured at compile time `-D TACHO_PIN=xx`)
* sampling frequency in seconds
* threshold temperature in degees C

11
usermods/PWM_fan/usermod_PWM_fan.h
View File

@ -10,6 +10,13 @@
// https://github.com/KlausMu/esp32-fan-controller/tree/main/src
// adapted for WLED usermod by @blazoncek
#ifndef TACHO_PIN
#define TACHO_PIN -1
#endif
#ifndef PWM_PIN
#define PWM_PIN -1
#endif
// tacho counter
static volatile unsigned long counter_rpm = 0;
@ -37,8 +44,8 @@ class PWMFanUsermod : public Usermod {
#endif
// configurable parameters
int8_t tachoPin = -1;
int8_t pwmPin = -1;
int8_t tachoPin = TACHO_PIN;
int8_t pwmPin = PWM_PIN;
uint8_t tachoUpdateSec = 30;
float targetTemperature = 25.0;
uint8_t minPWMValuePct = 50;

4
usermods/multi_relay/readme.md
View File

@ -81,11 +81,13 @@ void registerUsermods()
Usermod can be configured in Usermods settings page.
* `enabled` - enable/disable usermod
* `pin` - GPIO pin where relay is attached to ESP
* `pin` - GPIO pin where relay is attached to ESP (can be configured at compile time `-D MULTI_RELAY_PINS=xx,xx,...`)
* `delay-s` - delay in seconds after on/off command is received
* `active-high` - toggle high/low activation of relay (can be used to reverse relay states)
* `external` - if enabled WLED does not control relay, it can only be triggered by external command (MQTT, HTTP, JSON or button)
* `button` - button (from LED Settings) that controls this relay
* `broadcast`- time in seconds between state broadcasts using MQTT
* `HA-discovery`- enable Home Assistant auto discovery
If there is no MultiRelay section, just save current configuration and re-open Usermods settings page.

9
usermods/multi_relay/usermod_multi_relay.h
View File

@ -6,6 +6,10 @@
#define MULTI_RELAY_MAX_RELAYS 4
#endif
#ifndef MULTI_RELAY_PINS
#define MULTI_RELAY_PINS -1
#endif
#define WLED_DEBOUNCE_THRESHOLD 50 //only consider button input of at least 50ms as valid (debouncing)
#define ON true
@ -177,8 +181,9 @@ class MultiRelay : public Usermod {
* constructor
*/
MultiRelay() {
const int8_t defPins[] = {MULTI_RELAY_PINS};
for (uint8_t i=0; i<MULTI_RELAY_MAX_RELAYS; i++) {
_relay[i].pin = -1;
_relay[i].pin = i<sizeof(defPins) ? defPins[i] : -1;
_relay[i].delay = 0;
_relay[i].mode = false;
_relay[i].active = false;
@ -619,7 +624,7 @@ class MultiRelay : public Usermod {
DEBUG_PRINTLN(F(" config (re)loaded."));
}
// use "return !top["newestParameter"].isNull();" when updating Usermod with new features
return !top[FPSTR(_broadcast)].isNull();
return !top[FPSTR(_HAautodiscovery)].isNull();
}
/**