diff --git a/usermods/PIR_sensor_switch/usermod_PIR_sensor_switch.h b/usermods/PIR_sensor_switch/usermod_PIR_sensor_switch.h index d875a42d..95e57992 100644 --- a/usermods/PIR_sensor_switch/usermod_PIR_sensor_switch.h +++ b/usermods/PIR_sensor_switch/usermod_PIR_sensor_switch.h @@ -1,399 +1,406 @@ -#pragma once - -#include "wled.h" - -#ifndef PIR_SENSOR_PIN - // compatible with QuinLED-Dig-Uno - #ifdef ARDUINO_ARCH_ESP32 - #define PIR_SENSOR_PIN 23 // Q4 - #else //ESP8266 boards - #define PIR_SENSOR_PIN 13 // Q4 (D7 on D1 mini) - #endif -#endif - -/* - * This usermod handles PIR sensor states. - * The strip will be switched on and the off timer will be resetted when the sensor goes HIGH. - * When the sensor state goes LOW, the off timer is started and when it expires, the strip is switched off. - * - * - * Usermods allow you to add own functionality to WLED more easily - * See: https://github.com/Aircoookie/WLED/wiki/Add-own-functionality - * - * v2 usermods are class inheritance based and can (but don't have to) implement more functions, each of them is shown in this example. - * Multiple v2 usermods can be added to one compilation easily. - * - * Creating a usermod: - * This file serves as an example. If you want to create a usermod, it is recommended to use usermod_v2_empty.h from the usermods folder as a template. - * Please remember to rename the class and file to a descriptive name. - * You may also use multiple .h and .cpp files. - * - * Using a usermod: - * 1. Copy the usermod into the sketch folder (same folder as wled00.ino) - * 2. Register the usermod by adding #include "usermod_filename.h" in the top and registerUsermod(new MyUsermodClass()) in the bottom of usermods_list.cpp - */ - -class PIRsensorSwitch : public Usermod -{ -public: - /** - * constructor - */ - PIRsensorSwitch() {} - /** - * desctructor - */ - ~PIRsensorSwitch() {} - - /** - * Enable/Disable the PIR sensor - */ - void EnablePIRsensor(bool en) { enabled = en; } - /** - * Get PIR sensor enabled/disabled state - */ - bool PIRsensorEnabled() { return enabled; } - -private: - // PIR sensor pin - int8_t PIRsensorPin = PIR_SENSOR_PIN; - // notification mode for colorUpdated() - const byte NotifyUpdateMode = CALL_MODE_NO_NOTIFY; // CALL_MODE_DIRECT_CHANGE - // delay before switch off after the sensor state goes LOW - uint32_t m_switchOffDelay = 600000; // 10min - // off timer start time - uint32_t m_offTimerStart = 0; - // current PIR sensor pin state - byte sensorPinState = LOW; - // PIR sensor enabled - bool enabled = true; - // status of initialisation - bool initDone = false; - // on and off presets - uint8_t m_onPreset = 0; - uint8_t m_offPreset = 0; - // flag to indicate that PIR sensor should activate WLED during nighttime only - bool m_nightTimeOnly = false; - // flag to send MQTT message only (assuming it is enabled) - bool m_mqttOnly = false; - - unsigned long lastLoop = 0; - - // strings to reduce flash memory usage (used more than twice) - static const char _name[]; - static const char _switchOffDelay[]; - static const char _enabled[]; - static const char _onPreset[]; - static const char _offPreset[]; - static const char _nightTime[]; - static const char _mqttOnly[]; - - /** - * check if it is daytime - * if sunrise/sunset is not defined (no NTP or lat/lon) default to nighttime - */ - bool isDayTime() { - bool isDayTime = false; - updateLocalTime(); - uint8_t hr = hour(localTime); - uint8_t mi = minute(localTime); - - if (sunrise && sunset) { - if (hour(sunrise)
hr) { - isDayTime = true; - } else { - if (hour(sunrise)==hr && minute(sunrise)mi) { - isDayTime = true; - } - } - } - return isDayTime; - } - - /** - * switch strip on/off - */ - void switchStrip(bool switchOn) - { - if (switchOn && m_onPreset) { - applyPreset(m_onPreset); - } else if (!switchOn && m_offPreset) { - applyPreset(m_offPreset); - } else if (switchOn && bri == 0) { - bri = briLast; - colorUpdated(NotifyUpdateMode); - } else if (!switchOn && bri != 0) { - briLast = bri; - bri = 0; - colorUpdated(NotifyUpdateMode); - } - } - - void publishMqtt(const char* state) - { - //Check if MQTT Connected, otherwise it will crash the 8266 - if (WLED_MQTT_CONNECTED){ - char subuf[64]; - strcpy(subuf, mqttDeviceTopic); - strcat_P(subuf, PSTR("/motion")); - mqtt->publish(subuf, 0, false, state); - } - } - - /** - * Read and update PIR sensor state. - * Initilize/reset switch off timer - */ - bool updatePIRsensorState() - { - bool pinState = digitalRead(PIRsensorPin); - if (pinState != sensorPinState) { - sensorPinState = pinState; // change previous state - - if (sensorPinState == HIGH) { - m_offTimerStart = 0; - if (!m_mqttOnly && (!m_nightTimeOnly || (m_nightTimeOnly && !isDayTime()))) switchStrip(true); - publishMqtt("on"); - } else /*if (bri != 0)*/ { - // start switch off timer - m_offTimerStart = millis(); - } - return true; - } - return false; - } - - /** - * switch off the strip if the delay has elapsed - */ - bool handleOffTimer() - { - if (m_offTimerStart > 0 && millis() - m_offTimerStart > m_switchOffDelay) - { - if (enabled == true) - { - if (!m_mqttOnly && (!m_nightTimeOnly || (m_nightTimeOnly && !isDayTime()))) switchStrip(false); - publishMqtt("off"); - } - m_offTimerStart = 0; - return true; - } - return false; - } - -public: - //Functions called by WLED - - /** - * setup() is called once at boot. WiFi is not yet connected at this point. - * You can use it to initialize variables, sensors or similar. - */ - void setup() - { - if (enabled) { - // pin retrieved from cfg.json (readFromConfig()) prior to running setup() - if (PIRsensorPin >= 0 && pinManager.allocatePin(PIRsensorPin,false)) { - // PIR Sensor mode INPUT_PULLUP - pinMode(PIRsensorPin, INPUT_PULLUP); - sensorPinState = digitalRead(PIRsensorPin); - } else { - if (PIRsensorPin >= 0) DEBUG_PRINTLN(F("PIRSensorSwitch pin allocation failed.")); - PIRsensorPin = -1; // allocation failed - enabled = false; - } - } - initDone = true; - } - - /** - * connected() is called every time the WiFi is (re)connected - * Use it to initialize network interfaces - */ - void connected() - { - } - - /** - * loop() is called continuously. Here you can check for events, read sensors, etc. - */ - void loop() - { - // only check sensors 4x/s - if (!enabled || millis() - lastLoop < 250 || strip.isUpdating()) return; - lastLoop = millis(); - - if (!updatePIRsensorState()) { - handleOffTimer(); - } - } - - /** - * addToJsonInfo() can be used to add custom entries to the /json/info part of the JSON API. - * - * Add PIR sensor state and switch off timer duration to jsoninfo - */ - void addToJsonInfo(JsonObject &root) - { - JsonObject user = root["u"]; - if (user.isNull()) user = root.createNestedObject("u"); - - if (enabled) - { - // off timer - String uiDomString = F("PIR "); - JsonArray infoArr = user.createNestedArray(uiDomString); // timer value - if (m_offTimerStart > 0) - { - uiDomString = ""; - unsigned int offSeconds = (m_switchOffDelay - (millis() - m_offTimerStart)) / 1000; - if (offSeconds >= 3600) - { - uiDomString += (offSeconds / 3600); - uiDomString += F("h "); - offSeconds %= 3600; - } - if (offSeconds >= 60) - { - uiDomString += (offSeconds / 60); - offSeconds %= 60; - } - else if (uiDomString.length() > 0) - { - uiDomString += 0; - } - if (uiDomString.length() > 0) - { - uiDomString += F("min "); - } - uiDomString += (offSeconds); - infoArr.add(uiDomString + F("s")); - } else { - infoArr.add(sensorPinState ? F("sensor on") : F("inactive")); - } - } else { - String uiDomString = F("PIR sensor"); - JsonArray infoArr = user.createNestedArray(uiDomString); - infoArr.add(F("disabled")); - } - } - - /** - * addToJsonState() can be used to add custom entries to the /json/state part of the JSON API (state object). - * Values in the state object may be modified by connected clients - */ -/* - void addToJsonState(JsonObject &root) - { - } -*/ - - /** - * readFromJsonState() can be used to receive data clients send to the /json/state part of the JSON API (state object). - * Values in the state object may be modified by connected clients - */ -/* - void readFromJsonState(JsonObject &root) - { - } -*/ - - /** - * provide the changeable values - */ - void addToConfig(JsonObject &root) - { - JsonObject top = root.createNestedObject(FPSTR(_name)); - top[FPSTR(_enabled)] = enabled; - top[FPSTR(_switchOffDelay)] = m_switchOffDelay / 1000; - top["pin"] = PIRsensorPin; - top[FPSTR(_onPreset)] = m_onPreset; - top[FPSTR(_offPreset)] = m_offPreset; - top[FPSTR(_nightTime)] = m_nightTimeOnly; - top[FPSTR(_mqttOnly)] = m_mqttOnly; - DEBUG_PRINTLN(F("PIR config saved.")); - } - - /** - * restore the changeable values - * readFromConfig() is called before setup() to populate properties from values stored in cfg.json - * - * The function should return true if configuration was successfully loaded or false if there was no configuration. - */ - bool readFromConfig(JsonObject &root) - { - bool oldEnabled = enabled; - int8_t oldPin = PIRsensorPin; - - JsonObject top = root[FPSTR(_name)]; - if (top.isNull()) { - DEBUG_PRINT(FPSTR(_name)); - DEBUG_PRINTLN(F(": No config found. (Using defaults.)")); - return false; - } - - PIRsensorPin = top["pin"] | PIRsensorPin; -// PIRsensorPin = min(39,max(-1,(int)PIRsensorPin)); // check bounds - - enabled = top[FPSTR(_enabled)] | enabled; - - m_switchOffDelay = (top[FPSTR(_switchOffDelay)] | m_switchOffDelay/1000) * 1000; - - m_onPreset = top[FPSTR(_onPreset)] | m_onPreset; - m_onPreset = max(0,min(250,(int)m_onPreset)); - - m_offPreset = top[FPSTR(_offPreset)] | m_offPreset; - m_offPreset = max(0,min(250,(int)m_offPreset)); - - m_nightTimeOnly = top[FPSTR(_nightTime)] | m_nightTimeOnly; - m_mqttOnly = top[FPSTR(_mqttOnly)] | m_mqttOnly; - - DEBUG_PRINT(FPSTR(_name)); - if (!initDone) { - // reading config prior to setup() - DEBUG_PRINTLN(F(" config loaded.")); - } else { - if (oldPin != PIRsensorPin || oldEnabled != enabled) { - // check if pin is OK - if (oldPin != PIRsensorPin && oldPin >= 0) { - // if we are changing pin in settings page - // deallocate old pin - pinManager.deallocatePin(oldPin); - if (pinManager.allocatePin(PIRsensorPin,false)) { - pinMode(PIRsensorPin, INPUT_PULLUP); - } else { - // allocation failed - PIRsensorPin = -1; - enabled = false; - } - } - if (enabled) { - sensorPinState = digitalRead(PIRsensorPin); - } - } - DEBUG_PRINTLN(F(" config (re)loaded.")); - } - // use "return !top["newestParameter"].isNull();" when updating Usermod with new features - return true; - } - - /** - * getId() allows you to optionally give your V2 usermod an unique ID (please define it in const.h!). - * This could be used in the future for the system to determine whether your usermod is installed. - */ - uint16_t getId() - { - return USERMOD_ID_PIRSWITCH; - } -}; - -// strings to reduce flash memory usage (used more than twice) -const char PIRsensorSwitch::_name[] PROGMEM = "PIRsensorSwitch"; -const char PIRsensorSwitch::_enabled[] PROGMEM = "PIRenabled"; -const char PIRsensorSwitch::_switchOffDelay[] PROGMEM = "PIRoffSec"; -const char PIRsensorSwitch::_onPreset[] PROGMEM = "on-preset"; -const char PIRsensorSwitch::_offPreset[] PROGMEM = "off-preset"; -const char PIRsensorSwitch::_nightTime[] PROGMEM = "nighttime-only"; -const char PIRsensorSwitch::_mqttOnly[] PROGMEM = "mqtt-only"; +#pragma once + +#include "wled.h" + +#ifndef PIR_SENSOR_PIN + // compatible with QuinLED-Dig-Uno + #ifdef ARDUINO_ARCH_ESP32 + #define PIR_SENSOR_PIN 23 // Q4 + #else //ESP8266 boards + #define PIR_SENSOR_PIN 13 // Q4 (D7 on D1 mini) + #endif +#endif + +/* + * This usermod handles PIR sensor states. + * The strip will be switched on and the off timer will be resetted when the sensor goes HIGH. + * When the sensor state goes LOW, the off timer is started and when it expires, the strip is switched off. + * + * + * Usermods allow you to add own functionality to WLED more easily + * See: https://github.com/Aircoookie/WLED/wiki/Add-own-functionality + * + * v2 usermods are class inheritance based and can (but don't have to) implement more functions, each of them is shown in this example. + * Multiple v2 usermods can be added to one compilation easily. + * + * Creating a usermod: + * This file serves as an example. If you want to create a usermod, it is recommended to use usermod_v2_empty.h from the usermods folder as a template. + * Please remember to rename the class and file to a descriptive name. + * You may also use multiple .h and .cpp files. + * + * Using a usermod: + * 1. Copy the usermod into the sketch folder (same folder as wled00.ino) + * 2. Register the usermod by adding #include "usermod_filename.h" in the top and registerUsermod(new MyUsermodClass()) in the bottom of usermods_list.cpp + */ + +class PIRsensorSwitch : public Usermod +{ +public: + /** + * constructor + */ + PIRsensorSwitch() {} + /** + * desctructor + */ + ~PIRsensorSwitch() {} + + /** + * Enable/Disable the PIR sensor + */ + void EnablePIRsensor(bool en) { enabled = en; } + /** + * Get PIR sensor enabled/disabled state + */ + bool PIRsensorEnabled() { return enabled; } + +private: + // PIR sensor pin + int8_t PIRsensorPin = PIR_SENSOR_PIN; + // notification mode for colorUpdated() + const byte NotifyUpdateMode = CALL_MODE_NO_NOTIFY; // CALL_MODE_DIRECT_CHANGE + // delay before switch off after the sensor state goes LOW + uint32_t m_switchOffDelay = 600000; // 10min + // off timer start time + uint32_t m_offTimerStart = 0; + // current PIR sensor pin state + byte sensorPinState = LOW; + // PIR sensor enabled + bool enabled = true; + // status of initialisation + bool initDone = false; + // on and off presets + uint8_t m_onPreset = 0; + uint8_t m_offPreset = 0; + // flag to indicate that PIR sensor should activate WLED during nighttime only + bool m_nightTimeOnly = false; + // flag to send MQTT message only (assuming it is enabled) + bool m_mqttOnly = false; + // flag to enable triggering only if WLED is initially off (LEDs are not on, preventing running effect being overwritten by PIR) + bool m_offOnly = false; + bool PIRtriggered = false; + + unsigned long lastLoop = 0; + + // strings to reduce flash memory usage (used more than twice) + static const char _name[]; + static const char _switchOffDelay[]; + static const char _enabled[]; + static const char _onPreset[]; + static const char _offPreset[]; + static const char _nightTime[]; + static const char _mqttOnly[]; + static const char _offOnly[]; + + /** + * check if it is daytime + * if sunrise/sunset is not defined (no NTP or lat/lon) default to nighttime + */ + bool isDayTime() { + bool isDayTime = false; + updateLocalTime(); + uint8_t hr = hour(localTime); + uint8_t mi = minute(localTime); + + if (sunrise && sunset) { + if (hour(sunrise)
hr) { + isDayTime = true; + } else { + if (hour(sunrise)==hr && minute(sunrise)mi) { + isDayTime = true; + } + } + } + return isDayTime; + } + + /** + * switch strip on/off + */ + void switchStrip(bool switchOn) + { + PIRtriggered = switchOn; + if (switchOn && m_onPreset) { + applyPreset(m_onPreset); + } else if (!switchOn && m_offPreset) { + applyPreset(m_offPreset); + } else if (switchOn && bri == 0) { + bri = briLast; + colorUpdated(NotifyUpdateMode); + } else if (!switchOn && bri != 0) { + briLast = bri; + bri = 0; + colorUpdated(NotifyUpdateMode); + } + } + + void publishMqtt(const char* state) + { + //Check if MQTT Connected, otherwise it will crash the 8266 + if (WLED_MQTT_CONNECTED){ + char subuf[64]; + strcpy(subuf, mqttDeviceTopic); + strcat_P(subuf, PSTR("/motion")); + mqtt->publish(subuf, 0, false, state); + } + } + + /** + * Read and update PIR sensor state. + * Initilize/reset switch off timer + */ + bool updatePIRsensorState() + { + bool pinState = digitalRead(PIRsensorPin); + if (pinState != sensorPinState) { + sensorPinState = pinState; // change previous state + + if (sensorPinState == HIGH) { + m_offTimerStart = 0; + if (!m_mqttOnly && (!m_nightTimeOnly || (m_nightTimeOnly && !isDayTime()))) switchStrip(true); + publishMqtt("on"); + } else /*if (bri != 0)*/ { + // start switch off timer + m_offTimerStart = millis(); + } + return true; + } + return false; + } + + /** + * switch off the strip if the delay has elapsed + */ + bool handleOffTimer() + { + if (m_offTimerStart > 0 && millis() - m_offTimerStart > m_switchOffDelay) + { + if (enabled == true) + { + if (!m_mqttOnly && (!m_nightTimeOnly || (m_nightTimeOnly && !isDayTime()))) switchStrip(false); + publishMqtt("off"); + } + m_offTimerStart = 0; + return true; + } + return false; + } + +public: + //Functions called by WLED + + /** + * setup() is called once at boot. WiFi is not yet connected at this point. + * You can use it to initialize variables, sensors or similar. + */ + void setup() + { + if (enabled) { + // pin retrieved from cfg.json (readFromConfig()) prior to running setup() + if (PIRsensorPin >= 0 && pinManager.allocatePin(PIRsensorPin,false)) { + // PIR Sensor mode INPUT_PULLUP + pinMode(PIRsensorPin, INPUT_PULLUP); + sensorPinState = digitalRead(PIRsensorPin); + } else { + if (PIRsensorPin >= 0) DEBUG_PRINTLN(F("PIRSensorSwitch pin allocation failed.")); + PIRsensorPin = -1; // allocation failed + enabled = false; + } + } + initDone = true; + } + + /** + * connected() is called every time the WiFi is (re)connected + * Use it to initialize network interfaces + */ + void connected() + { + } + + /** + * loop() is called continuously. Here you can check for events, read sensors, etc. + */ + void loop() + { + // only check sensors 4x/s + if (!enabled || millis() - lastLoop < 250 || strip.isUpdating() || (m_offOnly && bri && !PIRtriggered)) return; + lastLoop = millis(); + + if (!updatePIRsensorState()) { + handleOffTimer(); + } + } + + /** + * addToJsonInfo() can be used to add custom entries to the /json/info part of the JSON API. + * + * Add PIR sensor state and switch off timer duration to jsoninfo + */ + void addToJsonInfo(JsonObject &root) + { + JsonObject user = root["u"]; + if (user.isNull()) user = root.createNestedObject("u"); + + if (enabled) + { + // off timer + String uiDomString = F("PIR "); + JsonArray infoArr = user.createNestedArray(uiDomString); // timer value + if (m_offTimerStart > 0) + { + uiDomString = ""; + unsigned int offSeconds = (m_switchOffDelay - (millis() - m_offTimerStart)) / 1000; + if (offSeconds >= 3600) + { + uiDomString += (offSeconds / 3600); + uiDomString += F("h "); + offSeconds %= 3600; + } + if (offSeconds >= 60) + { + uiDomString += (offSeconds / 60); + offSeconds %= 60; + } + else if (uiDomString.length() > 0) + { + uiDomString += 0; + } + if (uiDomString.length() > 0) + { + uiDomString += F("min "); + } + uiDomString += (offSeconds); + infoArr.add(uiDomString + F("s")); + } else { + infoArr.add(sensorPinState ? F("sensor on") : F("inactive")); + } + } else { + String uiDomString = F("PIR sensor"); + JsonArray infoArr = user.createNestedArray(uiDomString); + infoArr.add(F("disabled")); + } + } + + /** + * addToJsonState() can be used to add custom entries to the /json/state part of the JSON API (state object). + * Values in the state object may be modified by connected clients + */ +/* + void addToJsonState(JsonObject &root) + { + } +*/ + + /** + * readFromJsonState() can be used to receive data clients send to the /json/state part of the JSON API (state object). + * Values in the state object may be modified by connected clients + */ +/* + void readFromJsonState(JsonObject &root) + { + } +*/ + + /** + * provide the changeable values + */ + void addToConfig(JsonObject &root) + { + JsonObject top = root.createNestedObject(FPSTR(_name)); + top[FPSTR(_enabled)] = enabled; + top[FPSTR(_switchOffDelay)] = m_switchOffDelay / 1000; + top["pin"] = PIRsensorPin; + top[FPSTR(_onPreset)] = m_onPreset; + top[FPSTR(_offPreset)] = m_offPreset; + top[FPSTR(_nightTime)] = m_nightTimeOnly; + top[FPSTR(_mqttOnly)] = m_mqttOnly; + top[FPSTR(_offOnly)] = m_offOnly; + DEBUG_PRINTLN(F("PIR config saved.")); + } + + /** + * restore the changeable values + * readFromConfig() is called before setup() to populate properties from values stored in cfg.json + * + * The function should return true if configuration was successfully loaded or false if there was no configuration. + */ + bool readFromConfig(JsonObject &root) + { + bool oldEnabled = enabled; + int8_t oldPin = PIRsensorPin; + + JsonObject top = root[FPSTR(_name)]; + if (top.isNull()) { + DEBUG_PRINT(FPSTR(_name)); + DEBUG_PRINTLN(F(": No config found. (Using defaults.)")); + return false; + } + + PIRsensorPin = top["pin"] | PIRsensorPin; + + enabled = top[FPSTR(_enabled)] | enabled; + + m_switchOffDelay = (top[FPSTR(_switchOffDelay)] | m_switchOffDelay/1000) * 1000; + + m_onPreset = top[FPSTR(_onPreset)] | m_onPreset; + m_onPreset = max(0,min(250,(int)m_onPreset)); + + m_offPreset = top[FPSTR(_offPreset)] | m_offPreset; + m_offPreset = max(0,min(250,(int)m_offPreset)); + + m_nightTimeOnly = top[FPSTR(_nightTime)] | m_nightTimeOnly; + m_mqttOnly = top[FPSTR(_mqttOnly)] | m_mqttOnly; + m_offOnly = top[FPSTR(_offOnly)] | m_offOnly; + + DEBUG_PRINT(FPSTR(_name)); + if (!initDone) { + // reading config prior to setup() + DEBUG_PRINTLN(F(" config loaded.")); + } else { + if (oldPin != PIRsensorPin || oldEnabled != enabled) { + // check if pin is OK + if (oldPin != PIRsensorPin && oldPin >= 0) { + // if we are changing pin in settings page + // deallocate old pin + pinManager.deallocatePin(oldPin); + if (pinManager.allocatePin(PIRsensorPin,false)) { + pinMode(PIRsensorPin, INPUT_PULLUP); + } else { + // allocation failed + PIRsensorPin = -1; + enabled = false; + } + } + if (enabled) { + sensorPinState = digitalRead(PIRsensorPin); + } + } + DEBUG_PRINTLN(F(" config (re)loaded.")); + } + // use "return !top["newestParameter"].isNull();" when updating Usermod with new features + return !top[FPSTR(_offOnly)].isNull(); + } + + /** + * getId() allows you to optionally give your V2 usermod an unique ID (please define it in const.h!). + * This could be used in the future for the system to determine whether your usermod is installed. + */ + uint16_t getId() + { + return USERMOD_ID_PIRSWITCH; + } +}; + +// strings to reduce flash memory usage (used more than twice) +const char PIRsensorSwitch::_name[] PROGMEM = "PIRsensorSwitch"; +const char PIRsensorSwitch::_enabled[] PROGMEM = "PIRenabled"; +const char PIRsensorSwitch::_switchOffDelay[] PROGMEM = "PIRoffSec"; +const char PIRsensorSwitch::_onPreset[] PROGMEM = "on-preset"; +const char PIRsensorSwitch::_offPreset[] PROGMEM = "off-preset"; +const char PIRsensorSwitch::_nightTime[] PROGMEM = "nighttime-only"; +const char PIRsensorSwitch::_mqttOnly[] PROGMEM = "mqtt-only"; +const char PIRsensorSwitch::_offOnly[] PROGMEM = "off-only"; diff --git a/wled00/wled.h b/wled00/wled.h index 01af907d..155bb6d1 100644 --- a/wled00/wled.h +++ b/wled00/wled.h @@ -8,7 +8,7 @@ */ // version code in format yymmddb (b = daily build) -#define VERSION 2107221 +#define VERSION 2107231 //uncomment this if you have a "my_config.h" file you'd like to use //#define WLED_USE_MY_CONFIG