lba.gitea/WLED
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Added compile time PWM fan pins.

Browse Source 
Updated readme
This commit is contained in:
Blaz Kristan 2022-04-29 09:52:45 +02:00
parent 2a3d128f3c
commit 279664a578
4 changed files with 15 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
usermods/PWM_fan/readme.md
View File

@ -19,8 +19,8 @@ You will also need `-D USERMOD_DALLASTEMPERATURE`.
All of the parameters are configured during run-time using Usermods settings page. All of the parameters are configured during run-time using Usermods settings page.
This includes: This includes:
* PWM output pin * PWM output pin (can be configured at compile time `-D PWM_PIN=xx`)
* tacho input pin * tacho input pin (can be configured at compile time `-D TACHO_PIN=xx`)
* sampling frequency in seconds * sampling frequency in seconds
* threshold temperature in degees C * threshold temperature in degees C

11
usermods/PWM_fan/usermod_PWM_fan.h
View File

@ -10,6 +10,13 @@
// https://github.com/KlausMu/esp32-fan-controller/tree/main/src // https://github.com/KlausMu/esp32-fan-controller/tree/main/src
// adapted for WLED usermod by @blazoncek // adapted for WLED usermod by @blazoncek
#ifndef TACHO_PIN
#define TACHO_PIN -1
#endif
#ifndef PWM_PIN
#define PWM_PIN -1
#endif
// tacho counter // tacho counter
static volatile unsigned long counter_rpm = 0; static volatile unsigned long counter_rpm = 0;
@ -37,8 +44,8 @@ class PWMFanUsermod : public Usermod {
#endif #endif
// configurable parameters // configurable parameters
int8_t tachoPin = -1; int8_t tachoPin = TACHO_PIN;
int8_t pwmPin = -1; int8_t pwmPin = PWM_PIN;
uint8_t tachoUpdateSec = 30; uint8_t tachoUpdateSec = 30;
float targetTemperature = 25.0; float targetTemperature = 25.0;
uint8_t minPWMValuePct = 50; uint8_t minPWMValuePct = 50;

4
usermods/multi_relay/readme.md
View File

@ -81,11 +81,13 @@ void registerUsermods()
Usermod can be configured in Usermods settings page. Usermod can be configured in Usermods settings page.
* `enabled` - enable/disable usermod * `enabled` - enable/disable usermod
* `pin` - GPIO pin where relay is attached to ESP * `pin` - GPIO pin where relay is attached to ESP (can be configured at compile time `-D MULTI_RELAY_PINS=xx,xx,...`)
* `delay-s` - delay in seconds after on/off command is received * `delay-s` - delay in seconds after on/off command is received
* `active-high` - toggle high/low activation of relay (can be used to reverse relay states) * `active-high` - toggle high/low activation of relay (can be used to reverse relay states)
* `external` - if enabled WLED does not control relay, it can only be triggered by external command (MQTT, HTTP, JSON or button) * `external` - if enabled WLED does not control relay, it can only be triggered by external command (MQTT, HTTP, JSON or button)
* `button` - button (from LED Settings) that controls this relay * `button` - button (from LED Settings) that controls this relay
* `broadcast`- time in seconds between state broadcasts using MQTT
* `HA-discovery`- enable Home Assistant auto discovery
If there is no MultiRelay section, just save current configuration and re-open Usermods settings page. If there is no MultiRelay section, just save current configuration and re-open Usermods settings page.

2
wled00/wled.h
View File

@ -8,7 +8,7 @@
*/ */
// version code in format yymmddb (b = daily build) // version code in format yymmddb (b = daily build)
#define VERSION 2204271 #define VERSION 2204281
//uncomment this if you have a "my_config.h" file you'd like to use //uncomment this if you have a "my_config.h" file you'd like to use
//#define WLED_USE_MY_CONFIG //#define WLED_USE_MY_CONFIG