Improvements for -S3 with PSRAM

qio_opi:   PSRAM  8MB or 16MB
qio_qspi:  PSRAM  2MB or 4MB

fun fact: _opi and _qspi modes both require a special bootloader.
This commit is contained in:
Frank 2023-07-20 22:09:14 +02:00
parent aa54d65f63
commit 2db966ba47

View File

@ -446,6 +446,7 @@ board_build.flash_mode = qio
upload_speed = 460800
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags} ${esp32s2.build_flags} #-D WLED_RELEASE_NAME=S2_saola
;-DLOLIN_WIFI_FIX ;; try this in case Wifi does not work
-DARDUINO_USB_CDC_ON_BOOT=1
lib_deps = ${esp32s2.lib_deps}
@ -458,6 +459,7 @@ board = esp32-c3-devkitm-1
board_build.partitions = tools/WLED_ESP32_4MB_1MB_FS.csv
build_flags = ${common.build_flags} ${esp32c3.build_flags} #-D WLED_RELEASE_NAME=ESP32-C3
-D WLED_WATCHDOG_TIMEOUT=0
-DLOLIN_WIFI_FIX ; seems to work much better with this
-DARDUINO_USB_CDC_ON_BOOT=1 ;; for virtual CDC USB
;-DARDUINO_USB_CDC_ON_BOOT=0 ;; for serial-to-USB chip
upload_speed = 460800
@ -474,7 +476,7 @@ build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags} ${esp32s3.build_flags}
-D CONFIG_LITTLEFS_FOR_IDF_3_2 -D WLED_WATCHDOG_TIMEOUT=0
-D ARDUINO_USB_CDC_ON_BOOT=0 ;; -D ARDUINO_USB_MODE=1 ;; for boards with serial-to-USB chip
;-D ARDUINO_USB_CDC_ON_BOOT=1 ;; -D ARDUINO_USB_MODE=0 ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
;-D ARDUINO_USB_CDC_ON_BOOT=1 ;; -D ARDUINO_USB_MODE=1 ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
;-D WLED_DEBUG
lib_deps = ${esp32s3.lib_deps}
board_build.partitions = tools/WLED_ESP32_8MB.csv
@ -483,11 +485,10 @@ board_build.flash_mode = qio
; board_build.flash_mode = dio ;; try this if you have problems at startup
monitor_filters = esp32_exception_decoder
[env:esp32s3dev_8MB_PSRAM]
;; ESP32-TinyS3 development board, with 8MB FLASH and 8MB PSRAM (memory_type: qio_opi, qio_qspi, or opi_opi)
;board = um_tinys3 ; -> needs workaround from https://github.com/Aircoookie/WLED/pull/2905#issuecomment-1328049860
;board = esp32s3box ; -> error: 'esp32_adc2gpio' was not declared in this scope
board = esp32-s3-devkitc-1 ; -> compiles, but does not support PSRAM
[env:esp32s3dev_8MB_PSRAM_opi]
;; ESP32-S3 development board, with 8MB FLASH and >= 8MB PSRAM (memory_type: qio_opi)
board = esp32-s3-devkitc-1 ;; generic dev board; the next line adds PSRAM support
board_build.arduino.memory_type = qio_opi ;; use with PSRAM: 8MB or 16MB
platform = ${esp32s3.platform}
platform_packages = ${esp32s3.platform_packages}
upload_speed = 921600
@ -495,7 +496,7 @@ build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags} ${esp32s3.build_flags}
-D CONFIG_LITTLEFS_FOR_IDF_3_2 -D WLED_WATCHDOG_TIMEOUT=0
;-D ARDUINO_USB_CDC_ON_BOOT=0 ;; -D ARDUINO_USB_MODE=1 ;; for boards with serial-to-USB chip
-D ARDUINO_USB_CDC_ON_BOOT=1 ;; -D ARDUINO_USB_MODE=0 ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
-D ARDUINO_USB_CDC_ON_BOOT=1 -D ARDUINO_USB_MODE=1 ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
; -D WLED_RELEASE_NAME=ESP32-S3_PSRAM
-D WLED_USE_PSRAM -DBOARD_HAS_PSRAM ; tells WLED that PSRAM shall be used
lib_deps = ${esp32s3.lib_deps}
@ -504,6 +505,13 @@ board_build.f_flash = 80000000L
board_build.flash_mode = qio
monitor_filters = esp32_exception_decoder
[env:esp32s3dev_8MB_PSRAM_qspi]
;; ESP32-TinyS3 development board, with 8MB FLASH and PSRAM (memory_type: qio_qspi)
extends = env:esp32s3dev_8MB_PSRAM_opi
;board = um_tinys3 ; -> needs workaround from https://github.com/Aircoookie/WLED/pull/2905#issuecomment-1328049860
board = esp32-s3-devkitc-1 ;; generic dev board; the next line adds PSRAM support
board_build.arduino.memory_type = qio_qspi ;; use with PSRAM: 2MB or 4MB
[env:esp8285_4CH_MagicHome]
board = esp8285
platform = ${common.platform_wled_default}