A few small fixes

platformio.ini

@@ -49,6 +49,7 @@ extra_configs =
 # ------------------------------------------------------------------------------
 arduino_core_2_6_3 = espressif8266@2.3.3
 arduino_core_2_7_4 = espressif8266@2.6.2
+arduino_core_3_0_0 = espressif8266@3.0.0
 
 # Development platforms
 arduino_core_develop = https://github.com/platformio/platform-espressif8266#develop
@@ -132,6 +133,8 @@ ldscript_4m1m = eagle.flash.4m1m.ld
 build_flags =
   -DESP8266
   -DFP_IN_IROM
+  ;-Wno-deprecated-declarations
+  ;-Wno-register
 ; NONOSDK22x_190703 = 2.2.2-dev(38a443e)
   -DPIO_FRAMEWORK_ARDUINO_ESPRESSIF_SDK22x_190703
 ; lwIP 2 - Higher Bandwidth no Features

usermods/EleksTube_IPS/TFTs.h

@@ -41,6 +41,7 @@ private:
 
   //// BEGIN STOLEN CODE
 
+  // Draw directly from file stored in RGB565 format
   bool drawBin(const char *filename) {
     fs::File bmpFS;
 
@@ -55,14 +56,25 @@ private:
       return(false);
     }
 
-    bool oldSwapBytes = getSwapBytes();
+    size_t sz = bmpFS.size();
-    setSwapBytes(true);
+    if (sz <= 64800)
+    {
+      bool oldSwapBytes = getSwapBytes();
+      setSwapBytes(true);
 
-    bmpFS.read((uint8_t *) output_buffer,64800);
+      int16_t h = sz / (135 * 2);
 
-    pushImage(0, 0,  135, 240, (uint16_t *)output_buffer);
+      //draw img that is shorter than 240pix into the center
+      int16_t y = (height() - h) /2;
 
-    setSwapBytes(oldSwapBytes);
+      bmpFS.read((uint8_t *) output_buffer,sz);
+
+      if (!realtimeMode || realtimeOverride) strip.service();
+
+      pushImage(0, y, 135, h, (uint16_t *)output_buffer);
+
+      setSwapBytes(oldSwapBytes);
+    }
 
     bmpFS.close();
 

usermods/EleksTube_IPS/readme.md

@@ -5,7 +5,7 @@ It enables running all WLED effects on the background SK6812 lighting, while dis
 Code is largely based on https://github.com/SmittyHalibut/EleksTubeHAX by Mark Smith!
 
 Supported:
-- Display with custom bitmaps from filesystem
+- Display with custom bitmaps or raw RGB565 images (.bin) from filesystem
 - Background lighting
 - Power button
 - RTC (with RTC usermod)
@@ -14,8 +14,18 @@ Supported:
 Not supported:
 - 3 navigation buttons, on-device setup
 
+Your images must be exactly 135 pixels wide and 1-240 pixels high.
+
 ## Installation 
 
 Compile and upload to clock using the `elekstube_ips` PlatformIO environment
-Once uploaded (the clock can be flashed like any ESP32 module), go to `[WLED-IP]/edit` and upload the 0-9.bmp files from the bmp folder.
+Once uploaded (the clock can be flashed like any ESP32 module), go to `[WLED-IP]/edit` and upload the 0-9.bin files from [here](https://github.com/Aircoookie/NixieThemes/tree/master/themes/RealisticNixie/bin).
-Use LED pin 12, relay pin 27 and button pin 34.
+You can find more clockfaces in the [NixieThemes](https://github.com/Aircoookie/NixieThemes/) repo.
+Use LED pin 12, relay pin 27 and button pin 34.
+
+## Use of RGB565 images
+
+Binary 16-bit per pixel RGB565 format `.bin` images are now supported. This has the benefit of only using 2/3rds of the file size a `.bmp` has.
+The drawback is that this format cannot be handled by common image programs and that an extra conversion step is needed.
+You can use https://lvgl.io/tools/imageconverter to convert your .bmp to a .bin file (settings `True color` and `Binary RGB565`)
+Thank you to @RedNax67 for adding .bin support.

wled00/bus_manager.h

@@ -24,7 +24,7 @@ struct BusConfig {
     colorOrder = pcolorOrder; reversed = rev; skipAmount = skip;
     uint8_t nPins = 1;
     if (type > 47) nPins = 2;
-    else if (type > 41 && type < 46) nPins = NUM_PWM_PINS(type);
+    else if (type > 40 && type < 46) nPins = NUM_PWM_PINS(type);
     for (uint8_t i = 0; i < nPins; i++) pins[i] = ppins[i];
   }
 };

wled00/const.h

@@ -237,7 +237,11 @@
 // string temp buffer (now stored in stack locally)
 #define OMAX 2048
 
-#define E131_MAX_UNIVERSE_COUNT 9
+#ifdef WLED_USE_ETHERNET
+#define E131_MAX_UNIVERSE_COUNT 20
+#else
+#define E131_MAX_UNIVERSE_COUNT 10
+#endif
 
 #define ABL_MILLIAMPS_DEFAULT 850  // auto lower brightness to stay close to milliampere limit
 

wled00/set.cpp

@@ -833,7 +833,7 @@ bool handleSet(AsyncWebServerRequest *request, const String& req, bool apply)
   
   pos = req.indexOf(F("NX=")); //sets digits to code
   if (pos > 0) {
-    strlcpy(cronixieDisplay, req.substring(pos + 3, pos + 9).c_str(), 6);
+    strlcpy(cronixieDisplay, req.substring(pos + 3, pos + 9).c_str(), 7);
     setCronixie();
   }
 

wled00/wled.h

@@ -8,7 +8,7 @@
  */
 
 // version code in format yymmddb (b = daily build)
-#define VERSION 2105200
+#define VERSION 2106070
 
 //uncomment this if you have a "my_config.h" file you'd like to use
 //#define WLED_USE_MY_CONFIG
@@ -249,7 +249,12 @@ WLED_GLOBAL byte apBehavior _INIT(AP_BEHAVIOR_BOOT_NO_CONN);       // access poi
 WLED_GLOBAL IPAddress staticIP      _INIT_N(((  0,   0,  0,  0))); // static IP of ESP
 WLED_GLOBAL IPAddress staticGateway _INIT_N(((  0,   0,  0,  0))); // gateway (router) IP
 WLED_GLOBAL IPAddress staticSubnet  _INIT_N(((255, 255, 255, 0))); // most common subnet in home networks
-WLED_GLOBAL bool noWifiSleep _INIT(false);                         // disabling modem sleep modes will increase heat output and power usage, but may help with connection issues
+#ifdef ARDUINO_ARCH_ESP32
+WLED_GLOBAL bool noWifiSleep _INIT(true);                          // disabling modem sleep modes will increase heat output and power usage, but may help with connection issues
+#else
+WLED_GLOBAL bool noWifiSleep _INIT(false);
+#endif
+
 #ifdef WLED_USE_ETHERNET
   #ifdef WLED_ETH_DEFAULT                                          // default ethernet board type if specified
     WLED_GLOBAL int ethernetType _INIT(WLED_ETH_DEFAULT);          // ethernet board type