Merge branch 'dev' into mergedev_210222

CHANGELOG.md

@@ -2,6 +2,16 @@
 
 ### Development versions after 0.11.1 release
 
+#### Build 2102050
+
+-   Version bump to 0.12.0-a0 "Hikari"
+-   Added FPS indication in info
+-   Bumped max outputs from 7 to 10 busses for ESP32
+
+#### Build 2101310
+
+-   First alpha configurable multipin
+
 #### Build 2101130
 
 -   Added color transitions for all segments and slots and for segment brightness

package.json

@@ -1,6 +1,6 @@
 {
   "name": "wled",
-  "version": "0.11.1",
+  "version": "0.12.0-a0",
   "description": "Tools for WLED project",
   "main": "tools/cdata.js",
   "directories": {

platformio.ini

@@ -12,7 +12,7 @@
 default_envs = travis_esp8266, travis_esp32
 
 # Release binaries
-; default_envs = nodemcuv2, esp01_1m_full, esp32dev, custom_WS2801, custom_APA102, custom_LEDPIN_16, custom_LEDPIN_4, custom_LEDPIN_3, custom32_LEDPIN_16, custom32_APA102
+; default_envs = nodemcuv2, esp01_1m_full, esp32dev
 
 # Single binaries (uncomment your board)
 ; default_envs = nodemcuv2

tools/cdata.js

@@ -398,6 +398,14 @@ const char PAGE_dmxmap[] PROGMEM = R"=====()=====";
       method: "plaintext",
       filter: "html-minify",
     },
+    {
+      file: "liveviewws.htm",
+      name: "PAGE_liveviewws",
+      prepend: "=====(",
+      append: ")=====",
+      method: "plaintext",
+      filter: "html-minify",
+    },
     {
       file: "404.htm",
       name: "PAGE_404",

usermods/BME280_v2/README.md

@@ -0,0 +1,40 @@
+Hello! I have written a v2 usermod for the BME280/BMP280 sensor based on the [existing v1 usermod](https://github.com/Aircoookie/WLED/blob/master/usermods/Wemos_D1_mini%2BWemos32_mini_shield/usermod_bme280.cpp). It is not just a refactor, there are many changes which I made to fit my use case, and I hope they will fit the use cases of others as well! Most notably, this usermod is *just* for the BME280 and does not control a display like in the v1 usermod designed for the WeMos shield. 
+
+- Requires libraries `BME280@~3.0.0` (by [finitespace](https://github.com/finitespace/BME280)) and `Wire`. Please add these under `lib_deps` in your `platform.ini` (or `platform_override.ini`).
+- Data is published over MQTT so make sure you've enabled the MQTT sync interface.
+- This usermod also writes to serial (GPIO1 on ESP8266). Please make sure nothing else listening on the serial TX pin of your board will get confused by log messages!
+
+To enable, compile with `USERMOD_BME280` defined (i.e. `platformio_override.ini`)
+```ini
+build_flags =
+  ${common.build_flags_esp8266}
+  -D USERMOD_BME280
+```
+or define `USERMOD_BME280` in `my_config.h`
+```c++
+#define USERMOD_BME280
+```
+
+Changes include:
+- Adjustable measure intervals
+  - Temperature and pressure have separate intervals due to pressure not frequently changing at any constant altitude
+- Adjustment of number of decimal places in published sensor values
+  - Separate adjustment for temperature, humidity and pressure values
+  - Values are rounded to the specified number of decimal places
+- Pressure measured in units of hPa instead of Pa
+- Calculation of heat index (apparent temperature) and dew point
+  - These, along with humidity measurements, are disabled if the sensor is a BMP280
+- 16x oversampling of sensor during measurement
+- Values are only published if they are different from the previous value
+- Values are published on startup (continually until the MQTT broker acknowledges a successful publication)
+
+Adjustments are made through preprocessor definitions at the start of the class definition.
+
+MQTT topics are as follows:
+Measurement type | MQTT topic
+--- | ---
+Temperature | `<deviceTopic>/temperature`
+Humidity | `<deviceTopic>/humidity`
+Pressure | `<deviceTopic>/pressure`
+Heat index | `<deviceTopic>/heat_index`
+Dew point | `<deviceTopic>/dew_point`

usermods/BME280_v2/usermod_bme280.h

@@ -0,0 +1,212 @@
+#pragma once
+
+#include "wled.h"
+#include <Arduino.h>
+#include <Wire.h>
+#include <BME280I2C.h>               // BME280 sensor
+#include <EnvironmentCalculations.h> // BME280 extended measurements
+
+class UsermodBME280 : public Usermod
+{
+private:
+// User-defined configuration
+#define Celsius               // Show temperature mesaurement in Celcius. Comment out for Fahrenheit
+#define TemperatureDecimals 1 // Number of decimal places in published temperaure values
+#define HumidityDecimals 0    // Number of decimal places in published humidity values
+#define PressureDecimals 2    // Number of decimal places in published pressure values
+#define TemperatureInterval 5 // Interval to measure temperature (and humidity, dew point if available) in seconds
+#define PressureInterval 300  // Interval to measure pressure in seconds
+
+// Sanity checks
+#if !defined(TemperatureDecimals) || TemperatureDecimals < 0
+  #define TemperatureDecimals 0
+#endif
+#if !defined(HumidityDecimals) || HumidityDecimals < 0
+  #define HumidityDecimals 0
+#endif
+#if !defined(PressureDecimals) || PressureDecimals < 0
+  #define PressureDecimals 0
+#endif
+#if !defined(TemperatureInterval) || TemperatureInterval < 0
+  #define TemperatureInterval 1
+#endif
+#if !defined(PressureInterval) || PressureInterval < 0
+  #define PressureInterval TemperatureInterval
+#endif
+
+#ifdef ARDUINO_ARCH_ESP32 // ESP32 boards
+  uint8_t SCL_PIN = 22;
+  uint8_t SDA_PIN = 21;
+#else // ESP8266 boards
+  uint8_t SCL_PIN = 5;
+  uint8_t SDA_PIN = 4;
+  //uint8_t RST_PIN = 16; // Uncoment for Heltec WiFi-Kit-8
+#endif
+
+  // BME280 sensor settings
+  BME280I2C::Settings settings{
+      BME280::OSR_X16, // Temperature oversampling x16
+      BME280::OSR_X16, // Humidity oversampling x16
+      BME280::OSR_X16, // Pressure oversampling x16
+      // Defaults
+      BME280::Mode_Forced,
+      BME280::StandbyTime_1000ms,
+      BME280::Filter_Off,
+      BME280::SpiEnable_False,
+      BME280I2C::I2CAddr_0x76 // I2C address. I2C specific. Default 0x76
+  };
+
+  BME280I2C bme{settings};
+
+  uint8_t SensorType;
+
+  // Measurement timers
+  long timer;
+  long lastTemperatureMeasure = 0;
+  long lastPressureMeasure = 0;
+
+  // Current sensor values
+  float SensorTemperature;
+  float SensorHumidity;
+  float SensorHeatIndex;
+  float SensorDewPoint;
+  float SensorPressure;
+  // Track previous sensor values
+  float lastTemperature;
+  float lastHumidity;
+  float lastHeatIndex;
+  float lastDewPoint;
+  float lastPressure;
+
+  // Store packet IDs of MQTT publications
+  uint16_t mqttTemperaturePub = 0;
+  uint16_t mqttPressurePub = 0;
+
+  void UpdateBME280Data(int SensorType)
+  {
+    float _temperature, _humidity, _pressure;
+    #ifdef Celsius
+      BME280::TempUnit tempUnit(BME280::TempUnit_Celsius);
+      EnvironmentCalculations::TempUnit envTempUnit(EnvironmentCalculations::TempUnit_Celsius);
+    #else
+      BME280::TempUnit tempUnit(BME280::TempUnit_Fahrenheit);
+      EnvironmentCalculations::TempUnit envTempUnit(EnvironmentCalculations::TempUnit_Fahrenheit);
+    #endif
+    BME280::PresUnit presUnit(BME280::PresUnit_hPa);
+
+    bme.read(_pressure, _temperature, _humidity, tempUnit, presUnit);
+
+    SensorTemperature = _temperature;
+    SensorHumidity = _humidity;
+    SensorPressure = _pressure;
+    if (SensorType == 1)
+    {
+      SensorHeatIndex = EnvironmentCalculations::HeatIndex(_temperature, _humidity, envTempUnit);
+      SensorDewPoint = EnvironmentCalculations::DewPoint(_temperature, _humidity, envTempUnit);
+    }
+  }
+
+public:
+  void setup()
+  {
+    Wire.begin(SDA_PIN, SCL_PIN);
+
+    if (!bme.begin())
+    {
+      SensorType = 0;
+      Serial.println("Could not find BME280I2C sensor!");
+    }
+    else
+    {
+      switch (bme.chipModel())
+      {
+      case BME280::ChipModel_BME280:
+        SensorType = 1;
+        Serial.println("Found BME280 sensor! Success.");
+        break;
+      case BME280::ChipModel_BMP280:
+        SensorType = 2;
+        Serial.println("Found BMP280 sensor! No Humidity available.");
+        break;
+      default:
+        SensorType = 0;
+        Serial.println("Found UNKNOWN sensor! Error!");
+      }
+    }
+  }
+
+  void loop()
+  {
+    // BME280 sensor MQTT publishing
+    // Check if sensor present and MQTT Connected, otherwise it will crash the MCU
+    if (SensorType != 0 && mqtt != nullptr)
+    {
+      // Timer to fetch new temperature, humidity and pressure data at intervals
+      timer = millis();
+
+      if (timer - lastTemperatureMeasure >= TemperatureInterval * 1000 || mqttTemperaturePub == 0)
+      {
+        lastTemperatureMeasure = timer;
+
+        UpdateBME280Data(SensorType);
+
+        float Temperature = roundf(SensorTemperature * pow(10, TemperatureDecimals)) / pow(10, TemperatureDecimals);
+        float Humidity, HeatIndex, DewPoint;
+
+        // If temperature has changed since last measure, create string populated with device topic
+        // from the UI and values read from sensor, then publish to broker
+        if (Temperature != lastTemperature)
+        {
+          String topic = String(mqttDeviceTopic) + "/temperature";
+          mqttTemperaturePub = mqtt->publish(topic.c_str(), 0, false, String(Temperature, TemperatureDecimals).c_str());
+        }
+
+        lastTemperature = Temperature; // Update last sensor temperature for next loop
+
+        if (SensorType == 1) // Only if sensor is a BME280
+        {
+          Humidity = roundf(SensorHumidity * pow(10, HumidityDecimals)) / pow(10, HumidityDecimals);
+          HeatIndex = roundf(SensorHeatIndex * pow(10, TemperatureDecimals)) / pow(10, TemperatureDecimals);
+          DewPoint = roundf(SensorDewPoint * pow(10, TemperatureDecimals)) / pow(10, TemperatureDecimals);
+
+          if (Humidity != lastHumidity)
+          {
+            String topic = String(mqttDeviceTopic) + "/humidity";
+            mqtt->publish(topic.c_str(), 0, false, String(Humidity, HumidityDecimals).c_str());
+          }
+
+          if (HeatIndex != lastHeatIndex)
+          {
+            String topic = String(mqttDeviceTopic) + "/heat_index";
+            mqtt->publish(topic.c_str(), 0, false, String(HeatIndex, TemperatureDecimals).c_str());
+          }
+
+          if (DewPoint != lastDewPoint)
+          {
+            String topic = String(mqttDeviceTopic) + "/dew_point";
+            mqtt->publish(topic.c_str(), 0, false, String(DewPoint, TemperatureDecimals).c_str());
+          }
+
+          lastHumidity = Humidity;
+          lastHeatIndex = HeatIndex;
+          lastDewPoint = DewPoint;
+        }
+      }
+
+      if (timer - lastPressureMeasure >= PressureInterval * 1000 || mqttPressurePub == 0)
+      {
+        lastPressureMeasure = timer;
+
+        float Pressure = roundf(SensorPressure * pow(10, PressureDecimals)) / pow(10, PressureDecimals);
+
+        if (Pressure != lastPressure)
+        {
+          String topic = String(mqttDeviceTopic) + "/pressure";
+          mqttPressurePub = mqtt->publish(topic.c_str(), 0, true, String(Pressure, PressureDecimals).c_str());
+        }
+
+        lastPressure = Pressure;
+      }
+    }
+  }
+};

usermods/Temperature/usermod_temperature.h

@@ -5,11 +5,13 @@
 #include <DallasTemperature.h> //DS18B20
 
 //Pin defaults for QuinLed Dig-Uno
+#ifndef TEMPERATURE_PIN
 #ifdef ARDUINO_ARCH_ESP32
 #define TEMPERATURE_PIN 18
 #else //ESP8266 boards
 #define TEMPERATURE_PIN 14
 #endif
+#endif
 
 // the frequency to check temperature, 1 minute
 #ifndef USERMOD_DALLASTEMPERATURE_MEASUREMENT_INTERVAL
@@ -58,6 +60,7 @@ class UsermodTemperature : public Usermod {
     }
 
     void getTemperature() {
+      if (strip.isUpdating()) return;
       #ifdef USERMOD_DALLASTEMPERATURE_CELSIUS
       temperature = sensor.getTempC(sensorDeviceAddress);
       #else
@@ -80,30 +83,28 @@ class UsermodTemperature : public Usermod {
       disabled = !sensor.getAddress(sensorDeviceAddress, 0);
 
       if (!disabled) {
-        DEBUG_PRINTLN("Dallas Temperature found");
+        DEBUG_PRINTLN(F("Dallas Temperature found"));
         // set the resolution for this specific device
         sensor.setResolution(sensorDeviceAddress, 9, true);
         // do not block waiting for reading
         sensor.setWaitForConversion(false);
+        // allocate pin & prevent other use
+        if (!pinManager.allocatePin(TEMPERATURE_PIN,false))
+          disabled = true;
       } else {
-        DEBUG_PRINTLN("Dallas Temperature not found");
+        DEBUG_PRINTLN(F("Dallas Temperature not found"));
       }
     }
 
     void loop() {
-      if (disabled) {
+      if (disabled || strip.isUpdating()) return;
-        return;
-      }
       
       unsigned long now = millis();
 
       // check to see if we are due for taking a measurement
       // lastMeasurement will not be updated until the conversion
       // is complete the the reading is finished
-      if (now - lastMeasurement < USERMOD_DALLASTEMPERATURE_MEASUREMENT_INTERVAL)
+      if (now - lastMeasurement < USERMOD_DALLASTEMPERATURE_MEASUREMENT_INTERVAL) return;
-      {
-        return;
-      }
 
       // we are due for a measurement, if we are not already waiting 
       // for a conversion to complete, then make a new request for temps
@@ -125,7 +126,7 @@ class UsermodTemperature : public Usermod {
             // dont publish super low temperature as the graph will get messed up
             // the DallasTemperature library returns -127C or -196.6F when problem
             // reading the sensor
-            strcat(subuf, "/temperature");
+            strcat_P(subuf, PSTR("/temperature"));
             mqtt->publish(subuf, 0, true, String(temperature).c_str());
           } else {
             // publish something else to indicate status?
@@ -136,34 +137,32 @@ class UsermodTemperature : public Usermod {
 
     void addToJsonInfo(JsonObject& root) {
       // dont add temperature to info if we are disabled
-      if (disabled) {
+      if (disabled) return;
-        return;
-      }
 
-      JsonObject user = root["u"];
+      JsonObject user = root[F("u")];
-      if (user.isNull()) user = root.createNestedObject("u");
+      if (user.isNull()) user = root.createNestedObject(F("u"));
 
-      JsonArray temp = user.createNestedArray("Temperature");
+      JsonArray temp = user.createNestedArray(F("Temperature"));
 
       if (!getTemperatureComplete) {
         // if we haven't read the sensor yet, let the user know
         // that we are still waiting for the first measurement
         temp.add((USERMOD_DALLASTEMPERATURE_FIRST_MEASUREMENT_AT - millis()) / 1000);
-        temp.add(" sec until read");
+        temp.add(F(" sec until read"));
         return;
       }
 
       if (temperature <= -100) {
         temp.add(0);
-        temp.add(" Sensor Error!");
+        temp.add(F(" Sensor Error!"));
         return;
       }
 
       temp.add(temperature);
       #ifdef USERMOD_DALLASTEMPERATURE_CELSIUS
-      temp.add("°C");
+      temp.add(F("°C"));
       #else
-      temp.add("°F");
+      temp.add(F("°F"));
       #endif
     }
 

wled00/FX.cpp

@@ -1257,7 +1257,7 @@ uint16_t WS2812FX::police_base(uint32_t color1, uint32_t color2, bool all)
       for (uint16_t i = idexB; i < idexR; i++) setPixelColor(i, color2);
     } 
   } else { //regular dot-only mode
-    uint8_t size = 1 + SEGMENT.intensity >> 3;
+    uint8_t size = 1 + (SEGMENT.intensity >> 3);
     if (size > SEGLEN/2) size = 1+ SEGLEN/2;
     for (uint8_t i=0; i <= size; i++) {
       setPixelColor(idexR+i, color1);

wled00/FX.h

@@ -29,12 +29,6 @@
 #ifndef WS2812FX_h
 #define WS2812FX_h
 
-#ifdef ESP32_MULTISTRIP
-  #include "../usermods/esp32_multistrip/NpbWrapper.h"
-#else
-  #include "NpbWrapper.h"
-#endif
-
 #include "const.h"
 
 #define FASTLED_INTERNAL //remove annoying pragma messages
@@ -586,12 +580,11 @@ class WS2812FX {
       ablMilliampsMax = 850;
       currentMilliamps = 0;
       timebase = 0;
-      bus = new NeoPixelWrapper();
       resetSegments();
     }
 
     void
-      init(bool supportWhite, uint16_t countPixels, bool skipFirst),
+      finalizeInit(bool supportWhite, uint16_t countPixels, bool skipFirst),
       service(void),
       blur(uint8_t),
       fill(uint32_t),
@@ -631,6 +624,8 @@ class WS2812FX {
       paletteFade = 0,
       paletteBlend = 0,
       milliampsPerLed = 55,
+//      getStripType(uint8_t strip=0),
+//      setStripType(uint8_t type, uint8_t strip=0),
       getBrightness(void),
       getMode(void),
       getSpeed(void),
@@ -645,12 +640,19 @@ class WS2812FX {
       get_random_wheel_index(uint8_t);
 
     int8_t
+//      setStripPin(uint8_t strip, int8_t pin),
+//      getStripPin(uint8_t strip=0),
+//      setStripPinClk(uint8_t strip, int8_t pin),
+//      getStripPinClk(uint8_t strip=0),
       tristate_square8(uint8_t x, uint8_t pulsewidth, uint8_t attdec);
 
     uint16_t
       ablMilliampsMax,
       currentMilliamps,
-      triwave16(uint16_t);
+//      setStripLen(uint8_t strip, uint16_t len),
+//      getStripLen(uint8_t strip=0),
+      triwave16(uint16_t),
+      getFps();
 
     uint32_t
       now,
@@ -796,8 +798,6 @@ class WS2812FX {
       mode_dynamic_smooth(void);
 
   private:
-    NeoPixelWrapper *bus;
-
     uint32_t crgb_to_col(CRGB fastled);
     CRGB col_to_crgb(uint32_t);
     CRGBPalette16 currentPalette;
@@ -809,11 +809,12 @@ class WS2812FX {
     uint16_t _usedSegmentData = 0;
     uint16_t _transitionDur = 750;
 
+    uint16_t _cumulativeFps = 2;
+
     void load_gradient_palette(uint8_t);
     void handle_palette(void);
 
     bool
-      shouldStartBus = false,
       _useRgbw = false,
       _skipFirstMode,
       _triggered;
@@ -861,12 +862,6 @@ class WS2812FX {
     uint32_t _colors_t[3];
     uint8_t _bri_t;
     
-    #ifdef WLED_USE_ANALOG_LEDS
-    uint32_t _analogLastShow = 0;
-    RgbwColor _analogLastColor = 0;
-    uint8_t _analogLastBri = 0;
-    #endif
-    
     uint8_t _segment_index = 0;
     uint8_t _segment_index_palette_last = 99;
     segment _segments[MAX_NUM_SEGMENTS] = { // SRAM footprint: 24 bytes per element

wled00/FX_fcn.cpp

@@ -47,7 +47,8 @@
   19, 18, 17, 16, 15, 20, 21, 22, 23, 24, 29, 28, 27, 26, 25]
 */
 
-void WS2812FX::init(bool supportWhite, uint16_t countPixels, bool skipFirst)
+//do not call this method from system context (network callback)
+void WS2812FX::finalizeInit(bool supportWhite, uint16_t countPixels, bool skipFirst)
 {
   if (supportWhite == _useRgbw && countPixels == _length && _skipFirstMode == skipFirst) return;
   RESET_RUNTIME;
@@ -55,21 +56,35 @@ void WS2812FX::init(bool supportWhite, uint16_t countPixels, bool skipFirst)
   _length = countPixels;
   _skipFirstMode = skipFirst;
 
-  uint8_t ty = 1;
-  if (supportWhite) ty = 2;
   _lengthRaw = _length;
   if (_skipFirstMode) {
     _lengthRaw += LED_SKIP_AMOUNT;
   }
 
-  deserializeMap();
+  //if busses failed to load, add default (FS issue...)
+  if (busses.getNumBusses() == 0) {
+    uint8_t defPin[] = {LEDPIN};
+    BusConfig defCfg = BusConfig(TYPE_WS2812_RGB, defPin, 0, _lengthRaw, COL_ORDER_GRB);
+    busses.add(defCfg);
+  }
   
-  bus->Begin((NeoPixelType)ty, _lengthRaw);
+  deserializeMap();
 
   _segments[0].start = 0;
   _segments[0].stop = _length;
 
   setBrightness(_brightness);
+
+  #ifdef ESP8266
+  for (uint8_t i = 0; i < busses.getNumBusses(); i++) {
+    Bus* b = busses.getBus(i);
+    if ((!IS_DIGITAL(b->getType()) || IS_2PIN(b->getType()))) continue;
+    uint8_t pins[5];
+    b->getPins(pins);
+    BusDigital* bd = static_cast<BusDigital*>(b);
+    if (pins[0] == 3) bd->reinit();
+  }
+  #endif
 }
 
 void WS2812FX::service() {
@@ -168,19 +183,17 @@ void WS2812FX::setPixelColor(uint16_t i, byte r, byte g, byte b, byte w)
     }
   }
   
-  RgbwColor col;
-  col.R = r; col.G = g; col.B = b; col.W = w;
-  
   uint16_t skip = _skipFirstMode ? LED_SKIP_AMOUNT : 0;
   if (SEGLEN) {//from segment
 
     //color_blend(getpixel, col, _bri_t); (pseudocode for future blending of segments)
     if (_bri_t < 255) {  
-      col.R = scale8(col.R, _bri_t);
+      r = scale8(r, _bri_t);
-      col.G = scale8(col.G, _bri_t);
+      g = scale8(g, _bri_t);
-      col.B = scale8(col.B, _bri_t);
+      b = scale8(b, _bri_t);
-      col.W = scale8(col.W, _bri_t);
+      w = scale8(w, _bri_t);
     }
+    uint32_t col = ((w << 24) | (r << 16) | (g << 8) | (b));
 
     /* Set all the pixels in the group, ensuring _skipFirstMode is honored */
     bool reversed = reverseMode ^ IS_REVERSE;
@@ -192,12 +205,12 @@ void WS2812FX::setPixelColor(uint16_t i, byte r, byte g, byte b, byte w)
       if (reverseMode) indexSetRev = REV(indexSet);
       if (indexSet < customMappingSize) indexSet = customMappingTable[indexSet];
       if (indexSetRev >= SEGMENT.start && indexSetRev < SEGMENT.stop) {
-        bus->SetPixelColor(indexSet + skip, col);
+        busses.setPixelColor(indexSet + skip, col);
         if (IS_MIRROR) { //set the corresponding mirrored pixel
           if (reverseMode) {
-            bus->SetPixelColor(REV(SEGMENT.start) - indexSet + skip + REV(SEGMENT.stop) + 1, col);
+            busses.setPixelColor(REV(SEGMENT.start) - indexSet + skip + REV(SEGMENT.stop) + 1, col);
           } else {
-            bus->SetPixelColor(SEGMENT.stop - indexSet + skip + SEGMENT.start - 1, col);
+            busses.setPixelColor(SEGMENT.stop - indexSet + skip + SEGMENT.start - 1, col);
           }
         }
       }
@@ -205,11 +218,13 @@ void WS2812FX::setPixelColor(uint16_t i, byte r, byte g, byte b, byte w)
   } else { //live data, etc.
     if (reverseMode) i = REV(i);
     if (i < customMappingSize) i = customMappingTable[i];
-    bus->SetPixelColor(i + skip, col);
+    
+    uint32_t col = ((w << 24) | (r << 16) | (g << 8) | (b));
+    busses.setPixelColor(i + skip, col);
   }
   if (skip && i == 0) {
     for (uint16_t j = 0; j < skip; j++) {
-      bus->SetPixelColor(j, RgbwColor(0, 0, 0, 0));
+      busses.setPixelColor(j, BLACK);
     }
   }
 }
@@ -260,7 +275,7 @@ void WS2812FX::show(void) {
 
     for (uint16_t i = 0; i < _length; i++) //sum up the usage of each LED
     {
-      RgbwColor c = bus->GetPixelColorRaw(i);
+      RgbwColor c = busses.getPixelColor(i);
 
       if(useWackyWS2815PowerModel)
       {
@@ -289,25 +304,30 @@ void WS2812FX::show(void) {
       uint16_t scaleI = scale * 255;
       uint8_t scaleB = (scaleI > 255) ? 255 : scaleI;
       uint8_t newBri = scale8(_brightness, scaleB);
-      bus->SetBrightness(newBri);
+      busses.setBrightness(newBri);
       currentMilliamps = (powerSum0 * newBri) / puPerMilliamp;
     } else
     {
       currentMilliamps = powerSum / puPerMilliamp;
-      bus->SetBrightness(_brightness);
+      busses.setBrightness(_brightness);
     }
     currentMilliamps += MA_FOR_ESP; //add power of ESP back to estimate
     currentMilliamps += _length; //add standby power back to estimate
   } else {
     currentMilliamps = 0;
-    bus->SetBrightness(_brightness);
+    busses.setBrightness(_brightness);
   }
   
   // some buses send asynchronously and this method will return before
   // all of the data has been sent.
   // See https://github.com/Makuna/NeoPixelBus/wiki/ESP32-NeoMethods#neoesp32rmt-methods
-  bus->Show();
+  busses.show();
-  _lastShow = millis();
+  unsigned long now = millis();
+  unsigned long diff = now - _lastShow;
+  uint16_t fpsCurr = 200;
+  if (diff > 0) fpsCurr = 1000 / diff;
+  _cumulativeFps = (3 * _cumulativeFps + fpsCurr) >> 2;
+  _lastShow = now;
 }
 
 /**
@@ -315,7 +335,16 @@ void WS2812FX::show(void) {
  * On some hardware (ESP32), strip updates are done asynchronously.
  */
 bool WS2812FX::isUpdating() {
-  return !bus->CanShow();
+  return !busses.canAllShow();
+}
+
+/**
+ * Returns the refresh rate of the LED strip. Useful for finding out whether a given setup is fast enough.
+ * Only updates on show() or is set to 0 fps if last show is more than 2 secs ago, so accurary varies
+ */
+uint16_t WS2812FX::getFps() {
+  if (millis() - _lastShow > 2000) return 0;
+  return _cumulativeFps +1;
 }
 
 /**
@@ -417,17 +446,6 @@ void WS2812FX::setBrightness(uint8_t b) {
     {
       _segments[i].setOption(SEG_OPTION_FREEZE, false);
     }
-    #if LEDPIN == LED_BUILTIN
-      shouldStartBus = true;
-    #endif
-  } else {
-    #if LEDPIN == LED_BUILTIN
-      if (shouldStartBus) {
-        shouldStartBus = false;
-        const uint8_t ty = _useRgbw ? 2 : 1;
-        bus->Begin((NeoPixelType)ty, _lengthRaw);
-      }
-    #endif
   }
   if (SEGENV.next_time > millis() + 22 && millis() - _lastShow > MIN_SHOW_DELAY) show();//apply brightness change immediately if no refresh soon
 }
@@ -485,7 +503,7 @@ uint32_t WS2812FX::getPixelColor(uint16_t i)
   
   if (i >= _lengthRaw) return 0;
   
-  return bus->GetPixelColorRgbw(i);
+  return busses.getPixelColor(i);
 }
 
 WS2812FX::Segment& WS2812FX::getSegment(uint8_t id) {
@@ -505,12 +523,13 @@ uint32_t WS2812FX::getLastShow(void) {
   return _lastShow;
 }
 
+//TODO these need to be on a per-strip basis
 uint8_t WS2812FX::getColorOrder(void) {
-  return bus->GetColorOrder();
+  return COL_ORDER_GRB;
 }
 
 void WS2812FX::setColorOrder(uint8_t co) {
-  bus->SetColorOrder(co);
+  //bus->SetColorOrder(co);
 }
 
 void WS2812FX::setSegment(uint8_t n, uint16_t i1, uint16_t i2, uint8_t grouping, uint8_t spacing) {
@@ -962,44 +981,6 @@ bool WS2812FX::segmentsAreIdentical(Segment* a, Segment* b)
   return true;
 }
 
-#ifdef WLED_USE_ANALOG_LEDS     
-void WS2812FX::setRgbwPwm(void) {
-  uint32_t nowUp = millis(); // Be aware, millis() rolls over every 49 days
-  if (nowUp - _analogLastShow < MIN_SHOW_DELAY) return;
-
-  _analogLastShow = nowUp;
-
-  RgbwColor c;
-  uint32_t col = bus->GetPixelColorRgbw(PWM_INDEX);
-  c.R = col >> 16; c.G = col >> 8; c.B = col; c.W = col >> 24;
-
-  byte b = getBrightness();
-  if (c == _analogLastColor && b == _analogLastBri) return;
-  
-  // check color values for Warm / Cold white mix (for RGBW)  // EsplanexaDevice.cpp
-  #ifdef WLED_USE_5CH_LEDS
-    if        (c.R == 255 && c.G == 255 && c.B == 255 && c.W == 255) {  
-      bus->SetRgbwPwm(0, 0, 0,                  0, c.W * b / 255);
-    } else if (c.R == 127 && c.G == 127 && c.B == 127 && c.W == 255) {  
-      bus->SetRgbwPwm(0, 0, 0, c.W * b / 512, c.W * b / 255);
-    } else if (c.R ==   0 && c.G ==   0 && c.B ==   0 && c.W == 255) {  
-      bus->SetRgbwPwm(0, 0, 0, c.W * b / 255,                  0);
-    } else if (c.R == 130 && c.G ==  90 && c.B ==   0 && c.W == 255) {  
-      bus->SetRgbwPwm(0, 0, 0, c.W * b / 255, c.W * b / 512);
-    } else if (c.R == 255 && c.G == 153 && c.B ==   0 && c.W == 255) {  
-      bus->SetRgbwPwm(0, 0, 0, c.W * b / 255,                  0);
-    } else {  // not only white colors
-      bus->SetRgbwPwm(c.R * b / 255, c.G * b / 255, c.B * b / 255, c.W * b / 255);
-    }
-  #else
-    bus->SetRgbwPwm(c.R * b / 255, c.G * b / 255, c.B * b / 255, c.W * b / 255);
-  #endif   
-  _analogLastColor = c;
-  _analogLastBri = b;
-}
-#else
-void WS2812FX::setRgbwPwm() {}
-#endif
 
 //load custom mapping table from JSON file
 void WS2812FX::deserializeMap(void) {

wled00/NpbWrapper.h

@@ -1,439 +0,0 @@
-//this code is a modified version of https://github.com/Makuna/NeoPixelBus/issues/103
-#ifndef NpbWrapper_h
-#define NpbWrapper_h
-
-//PIN CONFIGURATION
-#ifndef LEDPIN
-#define LEDPIN 2  //strip pin. Any for ESP32, gpio2 or 3 is recommended for ESP8266 (gpio2/3 are labeled D4/RX on NodeMCU and Wemos)
-#endif
-//#define USE_APA102  // Uncomment for using APA102 LEDs.
-//#define USE_WS2801  // Uncomment for using WS2801 LEDs (make sure you have NeoPixelBus v2.5.6 or newer)
-//#define USE_LPD8806 // Uncomment for using LPD8806
-//#define USE_TM1814  // Uncomment for using TM1814 LEDs (make sure you have NeoPixelBus v2.5.7 or newer)
-//#define USE_P9813   // Uncomment for using P9813 LEDs (make sure you have NeoPixelBus v2.5.8 or newer)
-//#define WLED_USE_ANALOG_LEDS //Uncomment for using "dumb" PWM controlled LEDs (see pins below, default R: gpio5, G: 12, B: 15, W: 13)
-//#define WLED_USE_H801 //H801 controller. Please uncomment #define WLED_USE_ANALOG_LEDS as well
-//#define WLED_USE_5CH_LEDS  //5 Channel H801 for cold and warm white
-//#define WLED_USE_BWLT11
-//#define WLED_USE_SHOJO_PCB
-
-#ifndef BTNPIN
-#define BTNPIN  0  //button pin. Needs to have pullup (gpio0 recommended)
-#endif
-
-#ifndef TOUCHPIN
-//#define TOUCHPIN T0 //touch pin. Behaves the same as button. ESP32 only.
-#endif
-
-#ifndef IRPIN
-#define IRPIN  4  //infrared pin (-1 to disable)  MagicHome: 4, H801 Wifi: 0
-#endif
-
-#ifndef RLYPIN
-#define RLYPIN 12  //pin for relay, will be set HIGH if LEDs are on (-1 to disable). Also usable for standby leds, triggers,...
-#endif
-
-#ifndef AUXPIN
-#define AUXPIN -1  //debug auxiliary output pin (-1 to disable)
-#endif
-
-#ifndef RLYMDE
-#define RLYMDE  1  //mode for relay, 0: LOW if LEDs are on 1: HIGH if LEDs are on
-#endif
-
-//enable color order override for a specific range of the strip
-//This can be useful if you want to chain multiple strings with incompatible color order
-//#define COLOR_ORDER_OVERRIDE
-#define COO_MIN    0
-#define COO_MAX   35 //not inclusive, this would set the override for LEDs 0-34
-#define COO_ORDER COL_ORDER_GRB
-
-//END CONFIGURATION
-
-#if defined(USE_APA102) || defined(USE_WS2801) || defined(USE_LPD8806) || defined(USE_P9813)
- #ifndef CLKPIN
-  #define CLKPIN 0
- #endif
- #ifndef DATAPIN
-  #define DATAPIN 2
- #endif
- #if BTNPIN == CLKPIN || BTNPIN == DATAPIN
-  #undef BTNPIN   // Deactivate button pin if it conflicts with one of the APA102 pins.
- #endif
-#endif
-
-#ifdef WLED_USE_ANALOG_LEDS
-  //PWM pins - PINs 15,13,12,14 (W2 = 04)are used with H801 Wifi LED Controller
-  #ifdef WLED_USE_H801
-    #define RPIN 15   //R pin for analog LED strip   
-    #define GPIN 13   //G pin for analog LED strip
-    #define BPIN 12   //B pin for analog LED strip
-    #define WPIN 14   //W pin for analog LED strip 
-    #define W2PIN 04  //W2 pin for analog LED strip
-    #undef BTNPIN
-    #undef IRPIN
-    #define IRPIN  0 //infrared pin (-1 to disable)  MagicHome: 4, H801 Wifi: 0
-  #elif defined(WLED_USE_BWLT11)
-  //PWM pins - to use with BW-LT11
-    #define RPIN 12  //R pin for analog LED strip
-    #define GPIN 4   //G pin for analog LED strip
-    #define BPIN 14  //B pin for analog LED strip
-    #define WPIN 5   //W pin for analog LED strip
-  #elif defined(WLED_USE_SHOJO_PCB)
-  //PWM pins - to use with Shojo PCB (https://www.bastelbunker.de/esp-rgbww-wifi-led-controller-vbs-edition/)
-    #define RPIN 14  //R pin for analog LED strip
-    #define GPIN 4   //G pin for analog LED strip
-    #define BPIN 5   //B pin for analog LED strip
-    #define WPIN 15  //W pin for analog LED strip
-    #define W2PIN 12 //W2 pin for analog LED strip
-  #elif defined(WLED_USE_PLJAKOBS_PCB)
-  // PWM pins - to use with esp_rgbww_controller from patrickjahns/pljakobs (https://github.com/pljakobs/esp_rgbww_controller)
-    #define RPIN 12  //R pin for analog LED strip
-    #define GPIN 13  //G pin for analog LED strip
-    #define BPIN 14  //B pin for analog LED strip
-    #define WPIN 4   //W pin for analog LED strip
-    #define W2PIN 5  //W2 pin for analog LED strip
-    #undef IRPIN
-  #else
-  //Enable override of Pins by using the platformio_override.ini file
-  //PWM pins - PINs 5,12,13,15 are used with Magic Home LED Controller
-    #ifndef RPIN
-      #define RPIN 5   //R pin for analog LED strip
-    #endif
-    #ifndef GPIN
-      #define GPIN 12  //G pin for analog LED strip
-    #endif
-    #ifndef BPIN
-      #define BPIN 15  //B pin for analog LED strip
-    #endif
-    #ifndef WPIN
-      #define WPIN 13  //W pin for analog LED strip
-    #endif
-  #endif
-  #undef RLYPIN
-  #define RLYPIN -1 //disable as pin 12 is used by analog LEDs
-#endif
-
-//automatically uses the right driver method for each platform
-#ifdef ARDUINO_ARCH_ESP32
- #ifdef USE_APA102
-  #define PIXELMETHOD DotStarMethod
- #elif defined(USE_WS2801)
-  #define PIXELMETHOD NeoWs2801Method
- #elif defined(USE_LPD8806)
-  #define PIXELMETHOD Lpd8806Method
- #elif defined(USE_TM1814)
-  #define PIXELMETHOD NeoTm1814Method  
- #elif defined(USE_P9813)
-  #define PIXELMETHOD P9813Method  
- #else
-  #define PIXELMETHOD NeoEsp32Rmt0Ws2812xMethod
- #endif
-#else //esp8266
- //autoselect the right method depending on strip pin
- #ifdef USE_APA102
-  #define PIXELMETHOD DotStarMethod
- #elif defined(USE_WS2801)
-  #define PIXELMETHOD NeoWs2801Method
- #elif defined(USE_LPD8806)
-  #define PIXELMETHOD Lpd8806Method
- #elif defined(USE_TM1814)
-  #define PIXELMETHOD NeoTm1814Method  
- #elif defined(USE_P9813)
-  #define PIXELMETHOD P9813Method  
- #elif LEDPIN == 2
-  #define PIXELMETHOD NeoEsp8266Uart1Ws2813Method //if you get an error here, try to change to NeoEsp8266UartWs2813Method or update Neopixelbus
- #elif LEDPIN == 3
-  #define PIXELMETHOD NeoEsp8266Dma800KbpsMethod
- #else
-  #define PIXELMETHOD NeoEsp8266BitBang800KbpsMethod
-  #pragma message "Software BitBang will be used because of your selected LED pin. This may cause flicker. Use GPIO 2 or 3 for best results."
- #endif
-#endif
-
-
-//you can now change the color order in the web settings
-#ifdef USE_APA102
- #define PIXELFEATURE3 DotStarBgrFeature
- #define PIXELFEATURE4 DotStarLbgrFeature
-#elif defined(USE_LPD8806)
- #define PIXELFEATURE3 Lpd8806GrbFeature 
- #define PIXELFEATURE4 Lpd8806GrbFeature 
-#elif defined(USE_WS2801)
- #define PIXELFEATURE3 NeoRbgFeature
- #define PIXELFEATURE4 NeoRbgFeature
-#elif defined(USE_TM1814)
-  #define PIXELFEATURE3 NeoWrgbTm1814Feature
-  #define PIXELFEATURE4 NeoWrgbTm1814Feature
-#elif defined(USE_P9813)
- #define PIXELFEATURE3 P9813BgrFeature 
- #define PIXELFEATURE4 NeoGrbwFeature   
-#else
- #define PIXELFEATURE3 NeoGrbFeature
- #define PIXELFEATURE4 NeoGrbwFeature
-#endif
-
-
-#include <NeoPixelBrightnessBus.h>
-#include "const.h"
-
-enum NeoPixelType
-{
-  NeoPixelType_None = 0,
-  NeoPixelType_Grb  = 1,
-  NeoPixelType_Grbw = 2,
-  NeoPixelType_End  = 3
-};
-
-class NeoPixelWrapper
-{
-public:
-  NeoPixelWrapper() :
-    // initialize each member to null
-    _pGrb(NULL),
-    _pGrbw(NULL),
-    _type(NeoPixelType_None)
-  {
-
-  }
-
-  ~NeoPixelWrapper()
-  {
-    cleanup();
-  }
-
-  void Begin(NeoPixelType type, uint16_t countPixels)
-  {
-    cleanup();
-    _type = type;
-
-    switch (_type)
-    {
-      case NeoPixelType_Grb:
-      #if defined(USE_APA102) || defined(USE_WS2801) || defined(USE_LPD8806) || defined(USE_P9813)
-        _pGrb = new NeoPixelBrightnessBus<PIXELFEATURE3,PIXELMETHOD>(countPixels, CLKPIN, DATAPIN);
-      #else
-        _pGrb = new NeoPixelBrightnessBus<PIXELFEATURE3,PIXELMETHOD>(countPixels, LEDPIN);
-      #endif
-        _pGrb->Begin();
-      break;
-
-      case NeoPixelType_Grbw:
-      #if defined(USE_APA102) || defined(USE_WS2801) || defined(USE_LPD8806) || defined(USE_P9813)
-        _pGrbw = new NeoPixelBrightnessBus<PIXELFEATURE4,PIXELMETHOD>(countPixels, CLKPIN, DATAPIN);
-      #else
-        _pGrbw = new NeoPixelBrightnessBus<PIXELFEATURE4,PIXELMETHOD>(countPixels, LEDPIN);
-      #endif
-        _pGrbw->Begin();
-      break;
-    }
-
-    #ifdef WLED_USE_ANALOG_LEDS 
-      #ifdef ARDUINO_ARCH_ESP32
-        ledcSetup(0, 5000, 8);
-        ledcAttachPin(RPIN, 0);
-        ledcSetup(1, 5000, 8);
-        ledcAttachPin(GPIN, 1);
-        ledcSetup(2, 5000, 8);        
-        ledcAttachPin(BPIN, 2);
-        if(_type == NeoPixelType_Grbw) 
-        {
-          ledcSetup(3, 5000, 8);        
-          ledcAttachPin(WPIN, 3);
-          #ifdef WLED_USE_5CH_LEDS
-            ledcSetup(4, 5000, 8);        
-            ledcAttachPin(W2PIN, 4);
-          #endif
-        }
-      #else  // ESP8266
-        //init PWM pins
-        pinMode(RPIN, OUTPUT);
-        pinMode(GPIN, OUTPUT);
-        pinMode(BPIN, OUTPUT); 
-        if(_type == NeoPixelType_Grbw) 
-        {
-          pinMode(WPIN, OUTPUT); 
-          #ifdef WLED_USE_5CH_LEDS
-            pinMode(W2PIN, OUTPUT);
-          #endif
-        }
-        analogWriteRange(255);  //same range as one RGB channel
-        analogWriteFreq(880);   //PWM frequency proven as good for LEDs
-      #endif 
-    #endif
-  }
-
-#ifdef WLED_USE_ANALOG_LEDS      
-    void SetRgbwPwm(uint8_t r, uint8_t g, uint8_t b, uint8_t w, uint8_t w2=0)
-    {
-      #ifdef ARDUINO_ARCH_ESP32
-        ledcWrite(0, r);
-        ledcWrite(1, g);
-        ledcWrite(2, b);
-        switch (_type) {
-          case NeoPixelType_Grb:                                                  break;
-          #ifdef WLED_USE_5CH_LEDS
-            case NeoPixelType_Grbw: ledcWrite(3, w); ledcWrite(4, w2);            break;
-          #else
-            case NeoPixelType_Grbw: ledcWrite(3, w);                              break;
-          #endif
-        }        
-      #else   // ESP8266
-        analogWrite(RPIN, r);
-        analogWrite(GPIN, g);
-        analogWrite(BPIN, b);
-        switch (_type) {
-          case NeoPixelType_Grb:                                                  break;
-          #ifdef WLED_USE_5CH_LEDS
-            case NeoPixelType_Grbw: analogWrite(WPIN, w); analogWrite(W2PIN, w2); break;
-          #else
-            case NeoPixelType_Grbw: analogWrite(WPIN, w);                         break;
-          #endif
-        }
-      #endif 
-    }
-#endif
-
-  void Show()
-  {
-    switch (_type)
-    {
-      case NeoPixelType_Grb:  _pGrb->Show();  break;
-      case NeoPixelType_Grbw: _pGrbw->Show(); break;
-    }
-  }
-
-  /** 
-   * This will return true if enough time has passed since the last time Show() was called. 
-   * This also means that calling Show() will not cause any undue waiting. If the method for 
-   * the defined bus is hardware that sends asynchronously, then call CanShow() will let 
-   * you know if it has finished sending the data from the last Show().
-   */
-  bool CanShow()
-  {
-    switch (_type)
-    {
-      case NeoPixelType_Grb:  return _pGrb->CanShow();
-      case NeoPixelType_Grbw: return _pGrbw->CanShow();
-      default: return true;
-    }
-  }
-
-  void SetPixelColor(uint16_t indexPixel, RgbwColor c)
-  {
-    RgbwColor col;
-
-    uint8_t co = _colorOrder;
-    #ifdef COLOR_ORDER_OVERRIDE
-    if (indexPixel >= COO_MIN && indexPixel < COO_MAX) co = COO_ORDER;
-    #endif
-
-    //reorder channels to selected order
-    switch (co)
-    {
-      case  0: col.G = c.G; col.R = c.R; col.B = c.B; break; //0 = GRB, default
-      case  1: col.G = c.R; col.R = c.G; col.B = c.B; break; //1 = RGB, common for WS2811
-      case  2: col.G = c.B; col.R = c.R; col.B = c.G; break; //2 = BRG
-      case  3: col.G = c.R; col.R = c.B; col.B = c.G; break; //3 = RBG
-      case  4: col.G = c.B; col.R = c.G; col.B = c.R; break; //4 = BGR
-      default: col.G = c.G; col.R = c.B; col.B = c.R; break; //5 = GBR
-    }
-    col.W = c.W;
-
-    switch (_type) {
-      case NeoPixelType_Grb: {
-        _pGrb->SetPixelColor(indexPixel, RgbColor(col.R,col.G,col.B));
-      }
-      break;
-      case NeoPixelType_Grbw: {
-        #if defined(USE_LPD8806) || defined(USE_WS2801)
-        _pGrbw->SetPixelColor(indexPixel, RgbColor(col.R,col.G,col.B));
-        #else
-        _pGrbw->SetPixelColor(indexPixel, col);
-        #endif
-      }
-      break;
-    } 
-  }
-
-  void SetBrightness(byte b)
-  {
-    switch (_type) {
-      case NeoPixelType_Grb: _pGrb->SetBrightness(b);   break;
-      case NeoPixelType_Grbw:_pGrbw->SetBrightness(b);  break;
-    }
-  }
-
-  void SetColorOrder(byte colorOrder) {
-    _colorOrder = colorOrder;
-  }
-
-  uint8_t GetColorOrder() {
-    return _colorOrder;
-  }
-
-  RgbwColor GetPixelColorRaw(uint16_t indexPixel) const
-  {
-    switch (_type) {
-      case NeoPixelType_Grb:  return _pGrb->GetPixelColor(indexPixel);  break;
-      case NeoPixelType_Grbw: return _pGrbw->GetPixelColor(indexPixel); break;
-    }
-    return 0;
-  }
-
-  // NOTE:  Due to feature differences, some support RGBW but the method name
-  // here needs to be unique, thus GetPixeColorRgbw
-  uint32_t GetPixelColorRgbw(uint16_t indexPixel) const
-  {
-    RgbwColor col(0,0,0,0);
-    switch (_type) {
-      case NeoPixelType_Grb:  col = _pGrb->GetPixelColor(indexPixel);  break;
-      case NeoPixelType_Grbw: col = _pGrbw->GetPixelColor(indexPixel); break;
-    }
-
-    uint8_t co = _colorOrder;
-    #ifdef COLOR_ORDER_OVERRIDE
-    if (indexPixel >= COO_MIN && indexPixel < COO_MAX) co = COO_ORDER;
-    #endif
-
-    switch (co)
-    {
-      //                    W               G              R               B
-      case  0: return ((col.W << 24) | (col.G << 8) | (col.R << 16) | (col.B)); //0 = GRB, default
-      case  1: return ((col.W << 24) | (col.R << 8) | (col.G << 16) | (col.B)); //1 = RGB, common for WS2811
-      case  2: return ((col.W << 24) | (col.B << 8) | (col.R << 16) | (col.G)); //2 = BRG
-      case  3: return ((col.W << 24) | (col.B << 8) | (col.G << 16) | (col.R)); //3 = RBG
-      case  4: return ((col.W << 24) | (col.R << 8) | (col.B << 16) | (col.G)); //4 = BGR
-      case  5: return ((col.W << 24) | (col.G << 8) | (col.B << 16) | (col.R)); //5 = GBR
-    }
-    return 0;
-  }
-
-  uint8_t* GetPixels(void)
-  {
-    switch (_type) {
-      case NeoPixelType_Grb:  return _pGrb->Pixels();  break;
-      case NeoPixelType_Grbw: return _pGrbw->Pixels(); break;
-    }
-    return 0;
-  }
-
-
-private:
-  NeoPixelType _type;
-
-  // have a member for every possible type
-  NeoPixelBrightnessBus<PIXELFEATURE3,PIXELMETHOD>*  _pGrb;
-  NeoPixelBrightnessBus<PIXELFEATURE4,PIXELMETHOD>* _pGrbw;
-
-  byte _colorOrder = 0;
-
-  void cleanup()
-  {
-    switch (_type) {
-      case NeoPixelType_Grb:  delete _pGrb ; _pGrb  = NULL; break;
-      case NeoPixelType_Grbw: delete _pGrbw; _pGrbw = NULL; break;
-    }
-  }
-};
-#endif

wled00/bus_manager.h

@@ -0,0 +1,379 @@
+#ifndef BusManager_h
+#define BusManager_h
+
+/*
+ * Class for addressing various light types
+ */
+
+#include "const.h"
+#include "pin_manager.h"
+#include "bus_wrapper.h"
+#include <Arduino.h>
+
+//temporary struct for passing bus configuration to bus
+struct BusConfig {
+  uint8_t type = TYPE_WS2812_RGB;
+  uint16_t count = 1;
+  uint16_t start = 0;
+  uint8_t colorOrder = COL_ORDER_GRB;
+  bool reversed = false;
+  uint8_t pins[5] = {LEDPIN, 255, 255, 255, 255};
+  BusConfig(uint8_t busType, uint8_t* ppins, uint16_t pstart, uint16_t len = 1, uint8_t pcolorOrder = COL_ORDER_GRB, bool rev = false) {
+    type = busType; count = len; start = pstart; colorOrder = pcolorOrder; reversed = rev;
+    uint8_t nPins = 1;
+    if (type > 47) nPins = 2;
+    else if (type > 41 && type < 46) nPins = NUM_PWM_PINS(type);
+    for (uint8_t i = 0; i < nPins; i++) pins[i] = ppins[i];
+  }
+};
+
+//parent class of BusDigital and BusPwm
+class Bus {
+  public:
+  Bus(uint8_t type, uint16_t start) {
+    _type = type;
+    _start = start;
+  };
+  
+  virtual void show() {}
+  virtual bool canShow() { return true; }
+
+  virtual void setPixelColor(uint16_t pix, uint32_t c) {};
+
+  virtual void setBrightness(uint8_t b) {};
+
+  virtual uint32_t getPixelColor(uint16_t pix) { return 0; };
+
+  virtual void cleanup() {};
+
+  virtual ~Bus() { //throw the bus under the bus
+    //Serial.println("Destructor!");
+  }
+
+  virtual uint8_t getPins(uint8_t* pinArray) { return 0; }
+
+  uint16_t getStart() {
+    return _start;
+  }
+
+  void setStart(uint16_t start) {
+    _start = start;
+  }
+
+  virtual uint16_t getLength() {
+    return 1;
+  }
+
+  virtual void setColorOrder() {}
+
+  virtual uint8_t getColorOrder() {
+    return COL_ORDER_RGB;
+  }
+
+  uint8_t getType() {
+    return _type;
+  }
+
+  bool isOk() {
+    return _valid;
+  }
+
+  bool reversed = false;
+
+  protected:
+  uint8_t _type = TYPE_NONE;
+  uint8_t _bri = 255;
+  uint16_t _start = 0;
+  bool _valid = false;
+};
+
+
+class BusDigital : public Bus {
+  public:
+  BusDigital(BusConfig &bc, uint8_t nr) : Bus(bc.type, bc.start) {
+    if (!IS_DIGITAL(bc.type) || !bc.count) return;
+    _pins[0] = bc.pins[0];
+    if (!pinManager.allocatePin(_pins[0])) return;
+    if (IS_2PIN(bc.type)) {
+      _pins[1] = bc.pins[1];
+      if (!pinManager.allocatePin(_pins[1])) {
+        cleanup(); return;
+      }
+    }
+    _len = bc.count;
+    reversed = bc.reversed;
+    _iType = PolyBus::getI(bc.type, _pins, nr);
+    if (_iType == I_NONE) return;
+    _busPtr = PolyBus::create(_iType, _pins, _len);
+    _valid = (_busPtr != nullptr);
+    _colorOrder = bc.colorOrder;
+    //Serial.printf("Successfully inited strip %u (len %u) with type %u and pins %u,%u (itype %u)\n",nr, len, type, pins[0],pins[1],_iType);
+  };
+
+  void show() {
+    PolyBus::show(_busPtr, _iType);
+  }
+
+  bool canShow() {
+    return PolyBus::canShow(_busPtr, _iType);
+  }
+
+  void setBrightness(uint8_t b) {
+    //Fix for turning off onboard LED breaking bus
+    #ifdef LED_BUILTIN
+    if (_bri == 0 && b > 0) {
+      if (_pins[0] == LED_BUILTIN || _pins[1] == LED_BUILTIN) PolyBus::begin(_busPtr, _iType, _pins); 
+    }
+    #endif
+    _bri = b;
+    PolyBus::setBrightness(_busPtr, _iType, b);
+  }
+
+  void setPixelColor(uint16_t pix, uint32_t c) {
+    if (reversed) pix = _len - pix -1;
+    PolyBus::setPixelColor(_busPtr, _iType, pix, c, _colorOrder);
+  }
+
+  uint32_t getPixelColor(uint16_t pix) {
+    if (reversed) pix = _len - pix -1;
+    return PolyBus::getPixelColor(_busPtr, _iType, pix, _colorOrder);
+  }
+
+  uint8_t getColorOrder() {
+    return _colorOrder;
+  }
+
+  uint16_t getLength() {
+    return _len;
+  }
+
+  uint8_t getPins(uint8_t* pinArray) {
+    uint8_t numPins = IS_2PIN(_type) ? 2 : 1;
+    for (uint8_t i = 0; i < numPins; i++) pinArray[i] = _pins[i];
+    return numPins;
+  }
+
+  void setColorOrder(uint8_t colorOrder) {
+    if (colorOrder > 5) return;
+    _colorOrder = colorOrder;
+  }
+
+  void reinit() {
+    PolyBus::begin(_busPtr, _iType, _pins);
+  }
+
+  void cleanup() {
+    //Serial.println("Digital Cleanup");
+    PolyBus::cleanup(_busPtr, _iType);
+    _iType = I_NONE;
+    _valid = false;
+    _busPtr = nullptr;
+    pinManager.deallocatePin(_pins[0]);
+    pinManager.deallocatePin(_pins[1]);
+  }
+
+  ~BusDigital() {
+    cleanup();
+  }
+
+  private: 
+  uint8_t _colorOrder = COL_ORDER_GRB;
+  uint8_t _pins[2] = {255, 255};
+  uint8_t _iType = I_NONE;
+  uint16_t _len = 0;
+  void * _busPtr = nullptr;
+};
+
+
+class BusPwm : public Bus {
+  public:
+  BusPwm(BusConfig &bc) : Bus(bc.type, bc.start) {
+    if (!IS_PWM(bc.type)) return;
+    uint8_t numPins = NUM_PWM_PINS(bc.type);
+
+    #ifdef ESP8266
+    analogWriteRange(255);  //same range as one RGB channel
+    analogWriteFreq(WLED_PWM_FREQ_ESP8266);
+    #else
+    _ledcStart = pinManager.allocateLedc(numPins);
+    if (_ledcStart == 255) { //no more free LEDC channels
+      deallocatePins(); return;
+    }
+    #endif
+
+    for (uint8_t i = 0; i < numPins; i++) {
+      _pins[i] = bc.pins[i];
+      if (!pinManager.allocatePin(_pins[i])) {
+        deallocatePins(); return;
+      }
+      #ifdef ESP8266
+      pinMode(_pins[i], OUTPUT);
+      #else
+      ledcSetup(_ledcStart + i, WLED_PWM_FREQ_ESP32, 8);
+      ledcAttachPin(_pins[i], _ledcStart + i);
+      #endif
+    }
+    _valid = true;
+  };
+
+  void setPixelColor(uint16_t pix, uint32_t c) {
+    if (pix != 0 || !_valid) return; //only react to first pixel
+    uint8_t r = c >> 16;
+    uint8_t g = c >>  8;
+    uint8_t b = c      ;
+    uint8_t w = c >> 24;
+
+    switch (_type) {
+      case TYPE_ANALOG_1CH: //one channel (white), use highest RGBW value
+        _data[0] = max(r, max(g, max(b, w))); break;
+      
+      case TYPE_ANALOG_2CH: //warm white + cold white, we'll need some nice handling here, for now just R+G channels
+      case TYPE_ANALOG_3CH: //standard dumb RGB
+      case TYPE_ANALOG_4CH: //RGBW
+      case TYPE_ANALOG_5CH: //we'll want the white handling from 2CH here + RGB
+        _data[0] = r; _data[1] = g; _data[2] = b; _data[3] = w; _data[4] = 0; break;
+
+      default: return;
+    }
+  }
+
+  //does no index check
+  uint32_t getPixelColor(uint16_t pix) {
+    return ((_data[3] << 24) | (_data[0] << 16) | (_data[1] << 8) | (_data[2]));
+  }
+
+  void show() {
+    uint8_t numPins = NUM_PWM_PINS(_type);
+    for (uint8_t i = 0; i < numPins; i++) {
+      uint8_t scaled = (_data[i] * _bri) / 255;
+      #ifdef ESP8266
+      analogWrite(_pins[i], scaled);
+      #else
+      ledcWrite(_ledcStart + i, scaled);
+      #endif
+    }
+  }
+
+  void setBrightness(uint8_t b) {
+    _bri = b;
+  }
+
+  uint8_t getPins(uint8_t* pinArray) {
+    uint8_t numPins = NUM_PWM_PINS(_type);
+    for (uint8_t i = 0; i < numPins; i++) pinArray[i] = _pins[i];
+    return numPins;
+  }
+
+  void cleanup() {
+    deallocatePins();
+  }
+
+  private: 
+  uint8_t _pins[5] = {255, 255, 255, 255, 255};
+  uint8_t _data[5] = {255, 255, 255, 255, 255};
+  #ifdef ARDUINO_ARCH_ESP32
+  uint8_t _ledcStart = 255;
+  #endif
+
+  void deallocatePins() {
+    uint8_t numPins = NUM_PWM_PINS(_type);
+    for (uint8_t i = 0; i < numPins; i++) {
+      if (!pinManager.isPinOk(_pins[i])) continue;
+      #ifdef ESP8266
+      digitalWrite(_pins[i], LOW); //turn off PWM interrupt
+      #else
+      if (_ledcStart < 16) ledcDetachPin(_pins[i]);
+      #endif
+      pinManager.deallocatePin(_pins[i]);
+    }
+    #ifdef ARDUINO_ARCH_ESP32
+    pinManager.deallocateLedc(_ledcStart, numPins);
+    #endif
+  }
+};
+
+class BusManager {
+  public:
+  BusManager() {
+
+  };
+  
+  int add(BusConfig &bc) {
+    if (numBusses >= WLED_MAX_BUSSES) return -1;
+    if (IS_DIGITAL(bc.type)) {
+      busses[numBusses] = new BusDigital(bc, numBusses);
+    } else {
+      busses[numBusses] = new BusPwm(bc);
+    }
+    numBusses++;
+    return numBusses -1;
+  }
+
+  //do not call this method from system context (network callback)
+  void removeAll() {
+    //Serial.println("Removing all.");
+    //prevents crashes due to deleting busses while in use. 
+    while (!canAllShow()) yield();
+    for (uint8_t i = 0; i < numBusses; i++) delete busses[i];
+    numBusses = 0;
+  }
+  //void remove(uint8_t id);
+
+  void show() {
+    for (uint8_t i = 0; i < numBusses; i++) {
+      busses[i]->show();
+    }
+  }
+
+  void setPixelColor(uint16_t pix, uint32_t c) {
+    for (uint8_t i = 0; i < numBusses; i++) {
+      Bus* b = busses[i];
+      uint16_t bstart = b->getStart();
+      if (pix < bstart || pix >= bstart + b->getLength()) continue;
+      busses[i]->setPixelColor(pix - bstart, c);
+    }
+  }
+
+  void setBrightness(uint8_t b) {
+    for (uint8_t i = 0; i < numBusses; i++) {
+      busses[i]->setBrightness(b);
+    }
+  }
+
+  uint32_t getPixelColor(uint16_t pix) {
+    for (uint8_t i = 0; i < numBusses; i++) {
+      Bus* b = busses[i];
+      uint16_t bstart = b->getStart();
+      if (pix < bstart || pix >= bstart + b->getLength()) continue;
+      return b->getPixelColor(pix - bstart);
+    }
+    return 0;
+  }
+
+  bool canAllShow() {
+    for (uint8_t i = 0; i < numBusses; i++) {
+      if (!busses[i]->canShow()) return false;
+    }
+    return true;
+  }
+
+  Bus* getBus(uint8_t busNr) {
+    if (busNr >= numBusses) return nullptr;
+    return busses[busNr];
+  }
+
+  uint8_t getNumBusses() {
+    return numBusses;
+  }
+
+  static bool isRgbw(uint8_t type) {
+    if (type == TYPE_SK6812_RGBW || type == TYPE_TM1814) return true;
+    if (type > TYPE_ONOFF && type <= TYPE_ANALOG_5CH && type != TYPE_ANALOG_3CH) return true;
+    return false;
+  }
+
+  private:
+  uint8_t numBusses = 0;
+  Bus* busses[WLED_MAX_BUSSES];
+};
+#endif

wled00/bus_wrapper.h

@@ -0,0 +1,882 @@
+#ifndef BusWrapper_h
+#define BusWrapper_h
+
+#include "NeoPixelBrightnessBus.h"
+
+//Hardware SPI Pins
+#define P_8266_HS_MOSI 13
+#define P_8266_HS_CLK  14
+#define P_32_HS_MOSI   13
+#define P_32_HS_CLK    14
+#define P_32_VS_MOSI   23
+#define P_32_VS_CLK    18
+
+//The dirty list of possible bus types. Quite a lot...
+#define I_NONE 0
+//ESP8266 RGB
+#define I_8266_U0_NEO_3 1
+#define I_8266_U1_NEO_3 2
+#define I_8266_DM_NEO_3 3
+#define I_8266_BB_NEO_3 4
+//RGBW
+#define I_8266_U0_NEO_4 5
+#define I_8266_U1_NEO_4 6
+#define I_8266_DM_NEO_4 7
+#define I_8266_BB_NEO_4 8
+//400Kbps
+#define I_8266_U0_400_3 9
+#define I_8266_U1_400_3 10
+#define I_8266_DM_400_3 11
+#define I_8266_BB_400_3 12
+//TM1418 (RGBW)
+#define I_8266_U0_TM1_4 13
+#define I_8266_U1_TM1_4 14
+#define I_8266_DM_TM1_4 15
+#define I_8266_BB_TM1_4 16
+
+/*** ESP32 Neopixel methods ***/
+//RGB
+#define I_32_R0_NEO_3 17
+#define I_32_R1_NEO_3 18
+#define I_32_R2_NEO_3 19
+#define I_32_R3_NEO_3 20
+#define I_32_R4_NEO_3 21
+#define I_32_R5_NEO_3 22
+#define I_32_R6_NEO_3 23
+#define I_32_R7_NEO_3 24
+#define I_32_I0_NEO_3 25
+#define I_32_I1_NEO_3 26
+//RGBW
+#define I_32_R0_NEO_4 27
+#define I_32_R1_NEO_4 28
+#define I_32_R2_NEO_4 29
+#define I_32_R3_NEO_4 30
+#define I_32_R4_NEO_4 31
+#define I_32_R5_NEO_4 32
+#define I_32_R6_NEO_4 33
+#define I_32_R7_NEO_4 34
+#define I_32_I0_NEO_4 35
+#define I_32_I1_NEO_4 36
+//400Kbps
+#define I_32_R0_400_3 37
+#define I_32_R1_400_3 38
+#define I_32_R2_400_3 39
+#define I_32_R3_400_3 40
+#define I_32_R4_400_3 41
+#define I_32_R5_400_3 42
+#define I_32_R6_400_3 43
+#define I_32_R7_400_3 44
+#define I_32_I0_400_3 45
+#define I_32_I1_400_3 46
+//TM1418 (RGBW)
+#define I_32_R0_TM1_4 47
+#define I_32_R1_TM1_4 48
+#define I_32_R2_TM1_4 49
+#define I_32_R3_TM1_4 50
+#define I_32_R4_TM1_4 51
+#define I_32_R5_TM1_4 52
+#define I_32_R6_TM1_4 53
+#define I_32_R7_TM1_4 54
+#define I_32_I0_TM1_4 55
+#define I_32_I1_TM1_4 56
+//Bit Bang theoratically possible, but very undesirable and not needed (no pin restrictions on RMT and I2S)
+
+//APA102
+#define I_HS_DOT_3 57 //hardware SPI
+#define I_SS_DOT_3 58 //soft SPI
+
+//LPD8806
+#define I_HS_LPD_3 59
+#define I_SS_LPD_3 60
+
+//WS2801
+#define I_HS_WS1_3 61
+#define I_SS_WS1_3 62
+
+//P9813
+#define I_HS_P98_3 63
+#define I_SS_P98_3 64
+
+
+/*** ESP8266 Neopixel methods ***/
+#ifdef ESP8266
+//RGB
+#define B_8266_U0_NEO_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp8266Uart0Ws2813Method> //3 chan, esp8266, gpio1
+#define B_8266_U1_NEO_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp8266Uart1Ws2813Method> //3 chan, esp8266, gpio2
+#define B_8266_DM_NEO_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp8266Dma800KbpsMethod>  //3 chan, esp8266, gpio3
+#define B_8266_BB_NEO_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp8266BitBang800KbpsMethod> //3 chan, esp8266, bb (any pin but 16)
+//RGBW
+#define B_8266_U0_NEO_4 NeoPixelBrightnessBus<NeoGrbwFeature, NeoEsp8266Uart0Ws2813Method>   //4 chan, esp8266, gpio1
+#define B_8266_U1_NEO_4 NeoPixelBrightnessBus<NeoGrbwFeature, NeoEsp8266Uart1Ws2813Method>   //4 chan, esp8266, gpio2
+#define B_8266_DM_NEO_4 NeoPixelBrightnessBus<NeoGrbwFeature, NeoEsp8266Dma800KbpsMethod>    //4 chan, esp8266, gpio3
+#define B_8266_BB_NEO_4 NeoPixelBrightnessBus<NeoGrbwFeature, NeoEsp8266BitBang800KbpsMethod> //4 chan, esp8266, bb (any pin)
+//400Kbps
+#define B_8266_U0_400_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp8266Uart0400KbpsMethod>   //3 chan, esp8266, gpio1
+#define B_8266_U1_400_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp8266Uart1400KbpsMethod>   //3 chan, esp8266, gpio2
+#define B_8266_DM_400_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp8266Dma400KbpsMethod>     //3 chan, esp8266, gpio3
+#define B_8266_BB_400_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp8266BitBang400KbpsMethod> //3 chan, esp8266, bb (any pin)
+//TM1418 (RGBW)
+#define B_8266_U0_TM1_4 NeoPixelBrightnessBus<NeoWrgbTm1814Feature, NeoEsp8266Uart0Tm1814Method>
+#define B_8266_U1_TM1_4 NeoPixelBrightnessBus<NeoWrgbTm1814Feature, NeoEsp8266Uart1Tm1814Method>
+#define B_8266_DM_TM1_4 NeoPixelBrightnessBus<NeoWrgbTm1814Feature, NeoEsp8266DmaTm1814Method>
+#define B_8266_BB_TM1_4 NeoPixelBrightnessBus<NeoWrgbTm1814Feature, NeoEsp8266BitBangTm1814Method>
+#endif
+
+/*** ESP32 Neopixel methods ***/
+#ifdef ARDUINO_ARCH_ESP32
+//RGB
+#define B_32_R0_NEO_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp32Rmt0Ws2812xMethod>
+#define B_32_R1_NEO_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp32Rmt1Ws2812xMethod>
+#define B_32_R2_NEO_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp32Rmt2Ws2812xMethod>
+#define B_32_R3_NEO_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp32Rmt3Ws2812xMethod>
+#define B_32_R4_NEO_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp32Rmt4Ws2812xMethod>
+#define B_32_R5_NEO_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp32Rmt5Ws2812xMethod>
+#define B_32_R6_NEO_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp32Rmt6Ws2812xMethod>
+#define B_32_R7_NEO_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp32Rmt7Ws2812xMethod>
+#define B_32_I0_NEO_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp32I2s0800KbpsMethod>
+#define B_32_I1_NEO_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp32I2s1800KbpsMethod>
+//RGBW
+#define B_32_R0_NEO_4 NeoPixelBrightnessBus<NeoGrbwFeature, NeoEsp32Rmt0Ws2812xMethod>
+#define B_32_R1_NEO_4 NeoPixelBrightnessBus<NeoGrbwFeature, NeoEsp32Rmt1Ws2812xMethod>
+#define B_32_R2_NEO_4 NeoPixelBrightnessBus<NeoGrbwFeature, NeoEsp32Rmt2Ws2812xMethod>
+#define B_32_R3_NEO_4 NeoPixelBrightnessBus<NeoGrbwFeature, NeoEsp32Rmt3Ws2812xMethod>
+#define B_32_R4_NEO_4 NeoPixelBrightnessBus<NeoGrbwFeature, NeoEsp32Rmt4Ws2812xMethod>
+#define B_32_R5_NEO_4 NeoPixelBrightnessBus<NeoGrbwFeature, NeoEsp32Rmt5Ws2812xMethod>
+#define B_32_R6_NEO_4 NeoPixelBrightnessBus<NeoGrbwFeature, NeoEsp32Rmt6Ws2812xMethod>
+#define B_32_R7_NEO_4 NeoPixelBrightnessBus<NeoGrbwFeature, NeoEsp32Rmt7Ws2812xMethod>
+#define B_32_I0_NEO_4 NeoPixelBrightnessBus<NeoGrbwFeature, NeoEsp32I2s0800KbpsMethod>
+#define B_32_I1_NEO_4 NeoPixelBrightnessBus<NeoGrbwFeature, NeoEsp32I2s1800KbpsMethod>
+//400Kbps
+#define B_32_R0_400_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp32Rmt0400KbpsMethod>
+#define B_32_R1_400_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp32Rmt1400KbpsMethod>
+#define B_32_R2_400_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp32Rmt2400KbpsMethod>
+#define B_32_R3_400_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp32Rmt3400KbpsMethod>
+#define B_32_R4_400_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp32Rmt4400KbpsMethod>
+#define B_32_R5_400_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp32Rmt5400KbpsMethod>
+#define B_32_R6_400_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp32Rmt6400KbpsMethod>
+#define B_32_R7_400_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp32Rmt7400KbpsMethod>
+#define B_32_I0_400_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp32I2s0400KbpsMethod>
+#define B_32_I1_400_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp32I2s1400KbpsMethod>
+//TM1418 (RGBW)
+#define B_32_R0_TM1_4 NeoPixelBrightnessBus<NeoWrgbTm1814Feature, NeoEsp32Rmt0Tm1814Method>
+#define B_32_R1_TM1_4 NeoPixelBrightnessBus<NeoWrgbTm1814Feature, NeoEsp32Rmt1Tm1814Method>
+#define B_32_R2_TM1_4 NeoPixelBrightnessBus<NeoWrgbTm1814Feature, NeoEsp32Rmt2Tm1814Method>
+#define B_32_R3_TM1_4 NeoPixelBrightnessBus<NeoWrgbTm1814Feature, NeoEsp32Rmt3Tm1814Method>
+#define B_32_R4_TM1_4 NeoPixelBrightnessBus<NeoWrgbTm1814Feature, NeoEsp32Rmt4Tm1814Method>
+#define B_32_R5_TM1_4 NeoPixelBrightnessBus<NeoWrgbTm1814Feature, NeoEsp32Rmt5Tm1814Method>
+#define B_32_R6_TM1_4 NeoPixelBrightnessBus<NeoWrgbTm1814Feature, NeoEsp32Rmt6Tm1814Method>
+#define B_32_R7_TM1_4 NeoPixelBrightnessBus<NeoWrgbTm1814Feature, NeoEsp32Rmt7Tm1814Method>
+#define B_32_I0_TM1_4 NeoPixelBrightnessBus<NeoWrgbTm1814Feature, NeoEsp32I2s0Tm1814Method>
+#define B_32_I1_TM1_4 NeoPixelBrightnessBus<NeoWrgbTm1814Feature, NeoEsp32I2s1Tm1814Method>
+//Bit Bang theoratically possible, but very undesirable and not needed (no pin restrictions on RMT and I2S)
+
+#endif
+
+//APA102
+#define B_HS_DOT_3 NeoPixelBrightnessBus<DotStarBgrFeature, DotStarSpiMethod> //hardware SPI
+#define B_SS_DOT_3 NeoPixelBrightnessBus<DotStarBgrFeature, DotStarMethod> //soft SPI
+
+//LPD8806
+#define B_HS_LPD_3 NeoPixelBrightnessBus<Lpd8806GrbFeature, Lpd8806SpiMethod>
+#define B_SS_LPD_3 NeoPixelBrightnessBus<Lpd8806GrbFeature, Lpd8806Method>
+
+//WS2801
+#define B_HS_WS1_3 NeoPixelBrightnessBus<NeoRbgFeature, NeoWs2801SpiMethod>
+#define B_SS_WS1_3 NeoPixelBrightnessBus<NeoRbgFeature, NeoWs2801Method>
+
+//P9813
+#define B_HS_P98_3 NeoPixelBrightnessBus<P9813BgrFeature, P9813SpiMethod>
+#define B_SS_P98_3 NeoPixelBrightnessBus<P9813BgrFeature, P9813Method>
+
+//handles pointer type conversion for all possible bus types
+class PolyBus {
+  public:
+  static void begin(void* busPtr, uint8_t busType, uint8_t* pins) {
+    switch (busType) {
+      case I_NONE: break;
+    #ifdef ESP8266
+      case I_8266_U0_NEO_3: (static_cast<B_8266_U0_NEO_3*>(busPtr))->Begin(); break;
+      case I_8266_U1_NEO_3: (static_cast<B_8266_U1_NEO_3*>(busPtr))->Begin(); break;
+      case I_8266_DM_NEO_3: (static_cast<B_8266_DM_NEO_3*>(busPtr))->Begin(); break;
+      case I_8266_BB_NEO_3: (static_cast<B_8266_BB_NEO_3*>(busPtr))->Begin(); break;
+      case I_8266_U0_NEO_4: (static_cast<B_8266_U0_NEO_4*>(busPtr))->Begin(); break;
+      case I_8266_U1_NEO_4: (static_cast<B_8266_U1_NEO_4*>(busPtr))->Begin(); break;
+      case I_8266_DM_NEO_4: (static_cast<B_8266_DM_NEO_4*>(busPtr))->Begin(); break;
+      case I_8266_BB_NEO_4: (static_cast<B_8266_BB_NEO_4*>(busPtr))->Begin(); break;
+      case I_8266_U0_400_3: (static_cast<B_8266_U0_400_3*>(busPtr))->Begin(); break;
+      case I_8266_U1_400_3: (static_cast<B_8266_U1_400_3*>(busPtr))->Begin(); break;
+      case I_8266_DM_400_3: (static_cast<B_8266_DM_400_3*>(busPtr))->Begin(); break;
+      case I_8266_BB_400_3: (static_cast<B_8266_BB_400_3*>(busPtr))->Begin(); break;
+      case I_8266_U0_TM1_4: (static_cast<B_8266_U0_TM1_4*>(busPtr))->Begin(); break;
+      case I_8266_U1_TM1_4: (static_cast<B_8266_U1_TM1_4*>(busPtr))->Begin(); break;
+      case I_8266_DM_TM1_4: (static_cast<B_8266_DM_TM1_4*>(busPtr))->Begin(); break;
+      case I_8266_BB_TM1_4: (static_cast<B_8266_BB_TM1_4*>(busPtr))->Begin(); break;
+      case I_HS_DOT_3: (static_cast<B_HS_DOT_3*>(busPtr))->Begin(); break;
+      case I_HS_LPD_3: (static_cast<B_HS_LPD_3*>(busPtr))->Begin(); break;
+      case I_HS_WS1_3: (static_cast<B_HS_WS1_3*>(busPtr))->Begin(); break;
+      case I_HS_P98_3: (static_cast<B_HS_P98_3*>(busPtr))->Begin(); break;
+    #endif
+    #ifdef ARDUINO_ARCH_ESP32
+      case I_32_R0_NEO_3: (static_cast<B_32_R0_NEO_3*>(busPtr))->Begin(); break;
+      case I_32_R1_NEO_3: (static_cast<B_32_R1_NEO_3*>(busPtr))->Begin(); break;
+      case I_32_R2_NEO_3: (static_cast<B_32_R2_NEO_3*>(busPtr))->Begin(); break;
+      case I_32_R3_NEO_3: (static_cast<B_32_R3_NEO_3*>(busPtr))->Begin(); break;
+      case I_32_R4_NEO_3: (static_cast<B_32_R4_NEO_3*>(busPtr))->Begin(); break;
+      case I_32_R5_NEO_3: (static_cast<B_32_R5_NEO_3*>(busPtr))->Begin(); break;
+      case I_32_R6_NEO_3: (static_cast<B_32_R6_NEO_3*>(busPtr))->Begin(); break;
+      case I_32_R7_NEO_3: (static_cast<B_32_R7_NEO_3*>(busPtr))->Begin(); break;
+      case I_32_I0_NEO_3: (static_cast<B_32_I0_NEO_3*>(busPtr))->Begin(); break;
+      case I_32_I1_NEO_3: (static_cast<B_32_I1_NEO_3*>(busPtr))->Begin(); break;
+      case I_32_R0_NEO_4: (static_cast<B_32_R0_NEO_4*>(busPtr))->Begin(); break;
+      case I_32_R1_NEO_4: (static_cast<B_32_R1_NEO_4*>(busPtr))->Begin(); break;
+      case I_32_R2_NEO_4: (static_cast<B_32_R2_NEO_4*>(busPtr))->Begin(); break;
+      case I_32_R3_NEO_4: (static_cast<B_32_R3_NEO_4*>(busPtr))->Begin(); break;
+      case I_32_R4_NEO_4: (static_cast<B_32_R4_NEO_4*>(busPtr))->Begin(); break;
+      case I_32_R5_NEO_4: (static_cast<B_32_R5_NEO_4*>(busPtr))->Begin(); break;
+      case I_32_R6_NEO_4: (static_cast<B_32_R6_NEO_4*>(busPtr))->Begin(); break;
+      case I_32_R7_NEO_4: (static_cast<B_32_R7_NEO_4*>(busPtr))->Begin(); break;
+      case I_32_I0_NEO_4: (static_cast<B_32_I0_NEO_4*>(busPtr))->Begin(); break;
+      case I_32_I1_NEO_4: (static_cast<B_32_I1_NEO_4*>(busPtr))->Begin(); break;
+      case I_32_R0_400_3: (static_cast<B_32_R0_400_3*>(busPtr))->Begin(); break;
+      case I_32_R1_400_3: (static_cast<B_32_R1_400_3*>(busPtr))->Begin(); break;
+      case I_32_R2_400_3: (static_cast<B_32_R2_400_3*>(busPtr))->Begin(); break;
+      case I_32_R3_400_3: (static_cast<B_32_R3_400_3*>(busPtr))->Begin(); break;
+      case I_32_R4_400_3: (static_cast<B_32_R4_400_3*>(busPtr))->Begin(); break;
+      case I_32_R5_400_3: (static_cast<B_32_R5_400_3*>(busPtr))->Begin(); break;
+      case I_32_R6_400_3: (static_cast<B_32_R6_400_3*>(busPtr))->Begin(); break;
+      case I_32_R7_400_3: (static_cast<B_32_R7_400_3*>(busPtr))->Begin(); break;
+      case I_32_I0_400_3: (static_cast<B_32_I0_400_3*>(busPtr))->Begin(); break;
+      case I_32_I1_400_3: (static_cast<B_32_I1_400_3*>(busPtr))->Begin(); break;
+      case I_32_R0_TM1_4: (static_cast<B_32_R0_TM1_4*>(busPtr))->Begin(); break;
+      case I_32_R1_TM1_4: (static_cast<B_32_R1_TM1_4*>(busPtr))->Begin(); break;
+      case I_32_R2_TM1_4: (static_cast<B_32_R2_TM1_4*>(busPtr))->Begin(); break;
+      case I_32_R3_TM1_4: (static_cast<B_32_R3_TM1_4*>(busPtr))->Begin(); break;
+      case I_32_R4_TM1_4: (static_cast<B_32_R4_TM1_4*>(busPtr))->Begin(); break;
+      case I_32_R5_TM1_4: (static_cast<B_32_R5_TM1_4*>(busPtr))->Begin(); break;
+      case I_32_R6_TM1_4: (static_cast<B_32_R6_TM1_4*>(busPtr))->Begin(); break;
+      case I_32_R7_TM1_4: (static_cast<B_32_R7_TM1_4*>(busPtr))->Begin(); break;
+      case I_32_I0_TM1_4: (static_cast<B_32_I0_TM1_4*>(busPtr))->Begin(); break;
+      case I_32_I1_TM1_4: (static_cast<B_32_I1_TM1_4*>(busPtr))->Begin(); break;
+      // ESP32 can (and should, to avoid inadvertantly driving the chip select signal) specify the pins used for SPI, but only in begin()
+      case I_HS_DOT_3: (static_cast<B_HS_DOT_3*>(busPtr))->Begin(pins[1], -1, pins[0], -1); break;
+      case I_HS_LPD_3: (static_cast<B_HS_LPD_3*>(busPtr))->Begin(pins[1], -1, pins[0], -1); break;
+      case I_HS_WS1_3: (static_cast<B_HS_WS1_3*>(busPtr))->Begin(pins[1], -1, pins[0], -1); break;
+      case I_HS_P98_3: (static_cast<B_HS_P98_3*>(busPtr))->Begin(pins[1], -1, pins[0], -1); break;
+    #endif
+      case I_SS_DOT_3: (static_cast<B_SS_DOT_3*>(busPtr))->Begin(); break;
+      case I_SS_LPD_3: (static_cast<B_SS_LPD_3*>(busPtr))->Begin(); break;
+      case I_SS_WS1_3: (static_cast<B_SS_WS1_3*>(busPtr))->Begin(); break;
+      case I_SS_P98_3: (static_cast<B_SS_P98_3*>(busPtr))->Begin(); break;
+    }
+  };
+  static void* create(uint8_t busType, uint8_t* pins, uint16_t len) {
+    void* busPtr = nullptr;
+    switch (busType) {
+      case I_NONE: break;
+    #ifdef ESP8266
+      case I_8266_U0_NEO_3: busPtr = new B_8266_U0_NEO_3(len, pins[0]); break;
+      case I_8266_U1_NEO_3: busPtr = new B_8266_U1_NEO_3(len, pins[0]); break;
+      case I_8266_DM_NEO_3: busPtr = new B_8266_DM_NEO_3(len, pins[0]); break;
+      case I_8266_BB_NEO_3: busPtr = new B_8266_BB_NEO_3(len, pins[0]); break;
+      case I_8266_U0_NEO_4: busPtr = new B_8266_U0_NEO_4(len, pins[0]); break;
+      case I_8266_U1_NEO_4: busPtr = new B_8266_U1_NEO_4(len, pins[0]); break;
+      case I_8266_DM_NEO_4: busPtr = new B_8266_DM_NEO_4(len, pins[0]); break;
+      case I_8266_BB_NEO_4: busPtr = new B_8266_BB_NEO_4(len, pins[0]); break;
+      case I_8266_U0_400_3: busPtr = new B_8266_U0_400_3(len, pins[0]); break;
+      case I_8266_U1_400_3: busPtr = new B_8266_U1_400_3(len, pins[0]); break;
+      case I_8266_DM_400_3: busPtr = new B_8266_DM_400_3(len, pins[0]); break;
+      case I_8266_BB_400_3: busPtr = new B_8266_BB_400_3(len, pins[0]); break;
+      case I_8266_U0_TM1_4: busPtr = new B_8266_U0_TM1_4(len, pins[0]); break;
+      case I_8266_U1_TM1_4: busPtr = new B_8266_U1_TM1_4(len, pins[0]); break;
+      case I_8266_DM_TM1_4: busPtr = new B_8266_DM_TM1_4(len, pins[0]); break;
+      case I_8266_BB_TM1_4: busPtr = new B_8266_BB_TM1_4(len, pins[0]); break;
+    #endif
+    #ifdef ARDUINO_ARCH_ESP32
+      case I_32_R0_NEO_3: busPtr = new B_32_R0_NEO_3(len, pins[0]); break;
+      case I_32_R1_NEO_3: busPtr = new B_32_R1_NEO_3(len, pins[0]); break;
+      case I_32_R2_NEO_3: busPtr = new B_32_R2_NEO_3(len, pins[0]); break;
+      case I_32_R3_NEO_3: busPtr = new B_32_R3_NEO_3(len, pins[0]); break;
+      case I_32_R4_NEO_3: busPtr = new B_32_R4_NEO_3(len, pins[0]); break;
+      case I_32_R5_NEO_3: busPtr = new B_32_R5_NEO_3(len, pins[0]); break;
+      case I_32_R6_NEO_3: busPtr = new B_32_R6_NEO_3(len, pins[0]); break;
+      case I_32_R7_NEO_3: busPtr = new B_32_R7_NEO_3(len, pins[0]); break;
+      case I_32_I0_NEO_3: busPtr = new B_32_I0_NEO_3(len, pins[0]); break;
+      case I_32_I1_NEO_3: busPtr = new B_32_I1_NEO_3(len, pins[0]); break;
+      case I_32_R0_NEO_4: busPtr = new B_32_R0_NEO_4(len, pins[0]); break;
+      case I_32_R1_NEO_4: busPtr = new B_32_R1_NEO_4(len, pins[0]); break;
+      case I_32_R2_NEO_4: busPtr = new B_32_R2_NEO_4(len, pins[0]); break;
+      case I_32_R3_NEO_4: busPtr = new B_32_R3_NEO_4(len, pins[0]); break;
+      case I_32_R4_NEO_4: busPtr = new B_32_R4_NEO_4(len, pins[0]); break;
+      case I_32_R5_NEO_4: busPtr = new B_32_R5_NEO_4(len, pins[0]); break;
+      case I_32_R6_NEO_4: busPtr = new B_32_R6_NEO_4(len, pins[0]); break;
+      case I_32_R7_NEO_4: busPtr = new B_32_R7_NEO_4(len, pins[0]); break;
+      case I_32_I0_NEO_4: busPtr = new B_32_I0_NEO_4(len, pins[0]); break;
+      case I_32_I1_NEO_4: busPtr = new B_32_I1_NEO_4(len, pins[0]); break;
+      case I_32_R0_400_3: busPtr = new B_32_R0_400_3(len, pins[0]); break;
+      case I_32_R1_400_3: busPtr = new B_32_R1_400_3(len, pins[0]); break;
+      case I_32_R2_400_3: busPtr = new B_32_R2_400_3(len, pins[0]); break;
+      case I_32_R3_400_3: busPtr = new B_32_R3_400_3(len, pins[0]); break;
+      case I_32_R4_400_3: busPtr = new B_32_R4_400_3(len, pins[0]); break;
+      case I_32_R5_400_3: busPtr = new B_32_R5_400_3(len, pins[0]); break;
+      case I_32_R6_400_3: busPtr = new B_32_R6_400_3(len, pins[0]); break;
+      case I_32_R7_400_3: busPtr = new B_32_R7_400_3(len, pins[0]); break;
+      case I_32_I0_400_3: busPtr = new B_32_I0_400_3(len, pins[0]); break;
+      case I_32_I1_400_3: busPtr = new B_32_I1_400_3(len, pins[0]); break;
+      case I_32_R0_TM1_4: busPtr = new B_32_R0_TM1_4(len, pins[0]); break;
+      case I_32_R1_TM1_4: busPtr = new B_32_R1_TM1_4(len, pins[0]); break;
+      case I_32_R2_TM1_4: busPtr = new B_32_R2_TM1_4(len, pins[0]); break;
+      case I_32_R3_TM1_4: busPtr = new B_32_R3_TM1_4(len, pins[0]); break;
+      case I_32_R4_TM1_4: busPtr = new B_32_R4_TM1_4(len, pins[0]); break;
+      case I_32_R5_TM1_4: busPtr = new B_32_R5_TM1_4(len, pins[0]); break;
+      case I_32_R6_TM1_4: busPtr = new B_32_R6_TM1_4(len, pins[0]); break;
+      case I_32_R7_TM1_4: busPtr = new B_32_R7_TM1_4(len, pins[0]); break;
+      case I_32_I0_TM1_4: busPtr = new B_32_I0_TM1_4(len, pins[0]); break;
+      case I_32_I1_TM1_4: busPtr = new B_32_I1_TM1_4(len, pins[0]); break;
+    #endif
+      // for 2-wire: pins[1] is clk, pins[0] is dat.  begin expects (len, clk, dat)
+      case I_HS_DOT_3: busPtr = new B_HS_DOT_3(len, pins[1], pins[0]); break;
+      case I_SS_DOT_3: busPtr = new B_SS_DOT_3(len, pins[1], pins[0]); break;
+      case I_HS_LPD_3: busPtr = new B_HS_LPD_3(len, pins[1], pins[0]); break;
+      case I_SS_LPD_3: busPtr = new B_SS_LPD_3(len, pins[1], pins[0]); break;
+      case I_HS_WS1_3: busPtr = new B_HS_WS1_3(len, pins[1], pins[0]); break;
+      case I_SS_WS1_3: busPtr = new B_SS_WS1_3(len, pins[1], pins[0]); break;
+      case I_HS_P98_3: busPtr = new B_HS_P98_3(len, pins[1], pins[0]); break;
+      case I_SS_P98_3: busPtr = new B_SS_P98_3(len, pins[1], pins[0]); break;
+    }
+    begin(busPtr, busType, pins);
+    return busPtr;
+  };
+  static void show(void* busPtr, uint8_t busType) {
+    switch (busType) {
+      case I_NONE: break;
+    #ifdef ESP8266
+      case I_8266_U0_NEO_3: (static_cast<B_8266_U0_NEO_3*>(busPtr))->Show(); break;
+      case I_8266_U1_NEO_3: (static_cast<B_8266_U1_NEO_3*>(busPtr))->Show(); break;
+      case I_8266_DM_NEO_3: (static_cast<B_8266_DM_NEO_3*>(busPtr))->Show(); break;
+      case I_8266_BB_NEO_3: (static_cast<B_8266_BB_NEO_3*>(busPtr))->Show(); break;
+      case I_8266_U0_NEO_4: (static_cast<B_8266_U0_NEO_4*>(busPtr))->Show(); break;
+      case I_8266_U1_NEO_4: (static_cast<B_8266_U1_NEO_4*>(busPtr))->Show(); break;
+      case I_8266_DM_NEO_4: (static_cast<B_8266_DM_NEO_4*>(busPtr))->Show(); break;
+      case I_8266_BB_NEO_4: (static_cast<B_8266_BB_NEO_4*>(busPtr))->Show(); break;
+      case I_8266_U0_400_3: (static_cast<B_8266_U0_400_3*>(busPtr))->Show(); break;
+      case I_8266_U1_400_3: (static_cast<B_8266_U1_400_3*>(busPtr))->Show(); break;
+      case I_8266_DM_400_3: (static_cast<B_8266_DM_400_3*>(busPtr))->Show(); break;
+      case I_8266_BB_400_3: (static_cast<B_8266_BB_400_3*>(busPtr))->Show(); break;
+      case I_8266_U0_TM1_4: (static_cast<B_8266_U0_TM1_4*>(busPtr))->Show(); break;
+      case I_8266_U1_TM1_4: (static_cast<B_8266_U1_TM1_4*>(busPtr))->Show(); break;
+      case I_8266_DM_TM1_4: (static_cast<B_8266_DM_TM1_4*>(busPtr))->Show(); break;
+      case I_8266_BB_TM1_4: (static_cast<B_8266_BB_TM1_4*>(busPtr))->Show(); break;
+    #endif
+    #ifdef ARDUINO_ARCH_ESP32
+      case I_32_R0_NEO_3: (static_cast<B_32_R0_NEO_3*>(busPtr))->Show(); break;
+      case I_32_R1_NEO_3: (static_cast<B_32_R1_NEO_3*>(busPtr))->Show(); break;
+      case I_32_R2_NEO_3: (static_cast<B_32_R2_NEO_3*>(busPtr))->Show(); break;
+      case I_32_R3_NEO_3: (static_cast<B_32_R3_NEO_3*>(busPtr))->Show(); break;
+      case I_32_R4_NEO_3: (static_cast<B_32_R4_NEO_3*>(busPtr))->Show(); break;
+      case I_32_R5_NEO_3: (static_cast<B_32_R5_NEO_3*>(busPtr))->Show(); break;
+      case I_32_R6_NEO_3: (static_cast<B_32_R6_NEO_3*>(busPtr))->Show(); break;
+      case I_32_R7_NEO_3: (static_cast<B_32_R7_NEO_3*>(busPtr))->Show(); break;
+      case I_32_I0_NEO_3: (static_cast<B_32_I0_NEO_3*>(busPtr))->Show(); break;
+      case I_32_I1_NEO_3: (static_cast<B_32_I1_NEO_3*>(busPtr))->Show(); break;
+      case I_32_R0_NEO_4: (static_cast<B_32_R0_NEO_4*>(busPtr))->Show(); break;
+      case I_32_R1_NEO_4: (static_cast<B_32_R1_NEO_4*>(busPtr))->Show(); break;
+      case I_32_R2_NEO_4: (static_cast<B_32_R2_NEO_4*>(busPtr))->Show(); break;
+      case I_32_R3_NEO_4: (static_cast<B_32_R3_NEO_4*>(busPtr))->Show(); break;
+      case I_32_R4_NEO_4: (static_cast<B_32_R4_NEO_4*>(busPtr))->Show(); break;
+      case I_32_R5_NEO_4: (static_cast<B_32_R5_NEO_4*>(busPtr))->Show(); break;
+      case I_32_R6_NEO_4: (static_cast<B_32_R6_NEO_4*>(busPtr))->Show(); break;
+      case I_32_R7_NEO_4: (static_cast<B_32_R7_NEO_4*>(busPtr))->Show(); break;
+      case I_32_I0_NEO_4: (static_cast<B_32_I0_NEO_4*>(busPtr))->Show(); break;
+      case I_32_I1_NEO_4: (static_cast<B_32_I1_NEO_4*>(busPtr))->Show(); break;
+      case I_32_R0_400_3: (static_cast<B_32_R0_400_3*>(busPtr))->Show(); break;
+      case I_32_R1_400_3: (static_cast<B_32_R1_400_3*>(busPtr))->Show(); break;
+      case I_32_R2_400_3: (static_cast<B_32_R2_400_3*>(busPtr))->Show(); break;
+      case I_32_R3_400_3: (static_cast<B_32_R3_400_3*>(busPtr))->Show(); break;
+      case I_32_R4_400_3: (static_cast<B_32_R4_400_3*>(busPtr))->Show(); break;
+      case I_32_R5_400_3: (static_cast<B_32_R5_400_3*>(busPtr))->Show(); break;
+      case I_32_R6_400_3: (static_cast<B_32_R6_400_3*>(busPtr))->Show(); break;
+      case I_32_R7_400_3: (static_cast<B_32_R7_400_3*>(busPtr))->Show(); break;
+      case I_32_I0_400_3: (static_cast<B_32_I0_400_3*>(busPtr))->Show(); break;
+      case I_32_I1_400_3: (static_cast<B_32_I1_400_3*>(busPtr))->Show(); break;
+      case I_32_R0_TM1_4: (static_cast<B_32_R0_TM1_4*>(busPtr))->Show(); break;
+      case I_32_R1_TM1_4: (static_cast<B_32_R1_TM1_4*>(busPtr))->Show(); break;
+      case I_32_R2_TM1_4: (static_cast<B_32_R2_TM1_4*>(busPtr))->Show(); break;
+      case I_32_R3_TM1_4: (static_cast<B_32_R3_TM1_4*>(busPtr))->Show(); break;
+      case I_32_R4_TM1_4: (static_cast<B_32_R4_TM1_4*>(busPtr))->Show(); break;
+      case I_32_R5_TM1_4: (static_cast<B_32_R5_TM1_4*>(busPtr))->Show(); break;
+      case I_32_R6_TM1_4: (static_cast<B_32_R6_TM1_4*>(busPtr))->Show(); break;
+      case I_32_R7_TM1_4: (static_cast<B_32_R7_TM1_4*>(busPtr))->Show(); break;
+      case I_32_I0_TM1_4: (static_cast<B_32_I0_TM1_4*>(busPtr))->Show(); break;
+      case I_32_I1_TM1_4: (static_cast<B_32_I1_TM1_4*>(busPtr))->Show(); break;
+    #endif
+      case I_HS_DOT_3: (static_cast<B_HS_DOT_3*>(busPtr))->Show(); break;
+      case I_SS_DOT_3: (static_cast<B_SS_DOT_3*>(busPtr))->Show(); break;
+      case I_HS_LPD_3: (static_cast<B_HS_LPD_3*>(busPtr))->Show(); break;
+      case I_SS_LPD_3: (static_cast<B_SS_LPD_3*>(busPtr))->Show(); break;
+      case I_HS_WS1_3: (static_cast<B_HS_WS1_3*>(busPtr))->Show(); break;
+      case I_SS_WS1_3: (static_cast<B_SS_WS1_3*>(busPtr))->Show(); break;
+      case I_HS_P98_3: (static_cast<B_HS_P98_3*>(busPtr))->Show(); break;
+      case I_SS_P98_3: (static_cast<B_SS_P98_3*>(busPtr))->Show(); break;
+    }
+  };
+  static bool canShow(void* busPtr, uint8_t busType) {
+    switch (busType) {
+      case I_NONE: return true;
+    #ifdef ESP8266
+      case I_8266_U0_NEO_3: return (static_cast<B_8266_U0_NEO_3*>(busPtr))->CanShow(); break;
+      case I_8266_U1_NEO_3: return (static_cast<B_8266_U1_NEO_3*>(busPtr))->CanShow(); break;
+      case I_8266_DM_NEO_3: return (static_cast<B_8266_DM_NEO_3*>(busPtr))->CanShow(); break;
+      case I_8266_BB_NEO_3: return (static_cast<B_8266_BB_NEO_3*>(busPtr))->CanShow(); break;
+      case I_8266_U0_NEO_4: return (static_cast<B_8266_U0_NEO_4*>(busPtr))->CanShow(); break;
+      case I_8266_U1_NEO_4: return (static_cast<B_8266_U1_NEO_4*>(busPtr))->CanShow(); break;
+      case I_8266_DM_NEO_4: return (static_cast<B_8266_DM_NEO_4*>(busPtr))->CanShow(); break;
+      case I_8266_BB_NEO_4: return (static_cast<B_8266_BB_NEO_4*>(busPtr))->CanShow(); break;
+      case I_8266_U0_400_3: return (static_cast<B_8266_U0_400_3*>(busPtr))->CanShow(); break;
+      case I_8266_U1_400_3: return (static_cast<B_8266_U1_400_3*>(busPtr))->CanShow(); break;
+      case I_8266_DM_400_3: return (static_cast<B_8266_DM_400_3*>(busPtr))->CanShow(); break;
+      case I_8266_BB_400_3: return (static_cast<B_8266_BB_400_3*>(busPtr))->CanShow(); break;
+      case I_8266_U0_TM1_4: return (static_cast<B_8266_U0_TM1_4*>(busPtr))->CanShow(); break;
+      case I_8266_U1_TM1_4: return (static_cast<B_8266_U1_TM1_4*>(busPtr))->CanShow(); break;
+      case I_8266_DM_TM1_4: return (static_cast<B_8266_DM_TM1_4*>(busPtr))->CanShow(); break;
+      case I_8266_BB_TM1_4: return (static_cast<B_8266_BB_TM1_4*>(busPtr))->CanShow(); break;
+    #endif
+    #ifdef ARDUINO_ARCH_ESP32
+      case I_32_R0_NEO_3: return (static_cast<B_32_R0_NEO_3*>(busPtr))->CanShow(); break;
+      case I_32_R1_NEO_3: return (static_cast<B_32_R1_NEO_3*>(busPtr))->CanShow(); break;
+      case I_32_R2_NEO_3: return (static_cast<B_32_R2_NEO_3*>(busPtr))->CanShow(); break;
+      case I_32_R3_NEO_3: return (static_cast<B_32_R3_NEO_3*>(busPtr))->CanShow(); break;
+      case I_32_R4_NEO_3: return (static_cast<B_32_R4_NEO_3*>(busPtr))->CanShow(); break;
+      case I_32_R5_NEO_3: return (static_cast<B_32_R5_NEO_3*>(busPtr))->CanShow(); break;
+      case I_32_R6_NEO_3: return (static_cast<B_32_R6_NEO_3*>(busPtr))->CanShow(); break;
+      case I_32_R7_NEO_3: return (static_cast<B_32_R7_NEO_3*>(busPtr))->CanShow(); break;
+      case I_32_I0_NEO_3: return (static_cast<B_32_I0_NEO_3*>(busPtr))->CanShow(); break;
+      case I_32_I1_NEO_3: return (static_cast<B_32_I1_NEO_3*>(busPtr))->CanShow(); break;
+      case I_32_R0_NEO_4: return (static_cast<B_32_R0_NEO_4*>(busPtr))->CanShow(); break;
+      case I_32_R1_NEO_4: return (static_cast<B_32_R1_NEO_4*>(busPtr))->CanShow(); break;
+      case I_32_R2_NEO_4: return (static_cast<B_32_R2_NEO_4*>(busPtr))->CanShow(); break;
+      case I_32_R3_NEO_4: return (static_cast<B_32_R3_NEO_4*>(busPtr))->CanShow(); break;
+      case I_32_R4_NEO_4: return (static_cast<B_32_R4_NEO_4*>(busPtr))->CanShow(); break;
+      case I_32_R5_NEO_4: return (static_cast<B_32_R5_NEO_4*>(busPtr))->CanShow(); break;
+      case I_32_R6_NEO_4: return (static_cast<B_32_R6_NEO_4*>(busPtr))->CanShow(); break;
+      case I_32_R7_NEO_4: return (static_cast<B_32_R7_NEO_4*>(busPtr))->CanShow(); break;
+      case I_32_I0_NEO_4: return (static_cast<B_32_I0_NEO_4*>(busPtr))->CanShow(); break;
+      case I_32_I1_NEO_4: return (static_cast<B_32_I1_NEO_4*>(busPtr))->CanShow(); break;
+      case I_32_R0_400_3: return (static_cast<B_32_R0_400_3*>(busPtr))->CanShow(); break;
+      case I_32_R1_400_3: return (static_cast<B_32_R1_400_3*>(busPtr))->CanShow(); break;
+      case I_32_R2_400_3: return (static_cast<B_32_R2_400_3*>(busPtr))->CanShow(); break;
+      case I_32_R3_400_3: return (static_cast<B_32_R3_400_3*>(busPtr))->CanShow(); break;
+      case I_32_R4_400_3: return (static_cast<B_32_R4_400_3*>(busPtr))->CanShow(); break;
+      case I_32_R5_400_3: return (static_cast<B_32_R5_400_3*>(busPtr))->CanShow(); break;
+      case I_32_R6_400_3: return (static_cast<B_32_R6_400_3*>(busPtr))->CanShow(); break;
+      case I_32_R7_400_3: return (static_cast<B_32_R7_400_3*>(busPtr))->CanShow(); break;
+      case I_32_I0_400_3: return (static_cast<B_32_I0_400_3*>(busPtr))->CanShow(); break;
+      case I_32_I1_400_3: return (static_cast<B_32_I1_400_3*>(busPtr))->CanShow(); break;
+      case I_32_R0_TM1_4: return (static_cast<B_32_R0_TM1_4*>(busPtr))->CanShow(); break;
+      case I_32_R1_TM1_4: return (static_cast<B_32_R1_TM1_4*>(busPtr))->CanShow(); break;
+      case I_32_R2_TM1_4: return (static_cast<B_32_R2_TM1_4*>(busPtr))->CanShow(); break;
+      case I_32_R3_TM1_4: return (static_cast<B_32_R3_TM1_4*>(busPtr))->CanShow(); break;
+      case I_32_R4_TM1_4: return (static_cast<B_32_R4_TM1_4*>(busPtr))->CanShow(); break;
+      case I_32_R5_TM1_4: return (static_cast<B_32_R5_TM1_4*>(busPtr))->CanShow(); break;
+      case I_32_R6_TM1_4: return (static_cast<B_32_R6_TM1_4*>(busPtr))->CanShow(); break;
+      case I_32_R7_TM1_4: return (static_cast<B_32_R7_TM1_4*>(busPtr))->CanShow(); break;
+      case I_32_I0_TM1_4: return (static_cast<B_32_I0_TM1_4*>(busPtr))->CanShow(); break;
+      case I_32_I1_TM1_4: return (static_cast<B_32_I1_TM1_4*>(busPtr))->CanShow(); break;
+    #endif
+      case I_HS_DOT_3: return (static_cast<B_HS_DOT_3*>(busPtr))->CanShow(); break;
+      case I_SS_DOT_3: return (static_cast<B_SS_DOT_3*>(busPtr))->CanShow(); break;
+      case I_HS_LPD_3: return (static_cast<B_HS_LPD_3*>(busPtr))->CanShow(); break;
+      case I_SS_LPD_3: return (static_cast<B_SS_LPD_3*>(busPtr))->CanShow(); break;
+      case I_HS_WS1_3: return (static_cast<B_HS_WS1_3*>(busPtr))->CanShow(); break;
+      case I_SS_WS1_3: return (static_cast<B_SS_WS1_3*>(busPtr))->CanShow(); break;
+      case I_HS_P98_3: return (static_cast<B_HS_P98_3*>(busPtr))->CanShow(); break;
+      case I_SS_P98_3: return (static_cast<B_SS_P98_3*>(busPtr))->CanShow(); break;
+    }
+    return true;
+  };
+  static void setPixelColor(void* busPtr, uint8_t busType, uint16_t pix, uint32_t c, uint8_t co) {
+    uint8_t r = c >> 16;
+    uint8_t g = c >> 8;
+    uint8_t b = c >> 0;
+    uint8_t w = c >> 24;
+    RgbwColor col;
+
+    //TODO make color order override possible on a per-strip basis
+    #ifdef COLOR_ORDER_OVERRIDE
+    if (indexPixel >= COO_MIN && indexPixel < COO_MAX) co = COO_ORDER;
+    #endif
+
+    //reorder channels to selected order
+    switch (co)
+    {
+      case  0: col.G = g; col.R = r; col.B = b; break; //0 = GRB, default
+      case  1: col.G = r; col.R = g; col.B = b; break; //1 = RGB, common for WS2811
+      case  2: col.G = b; col.R = r; col.B = g; break; //2 = BRG
+      case  3: col.G = r; col.R = b; col.B = g; break; //3 = RBG
+      case  4: col.G = b; col.R = g; col.B = r; break; //4 = BGR
+      default: col.G = g; col.R = b; col.B = r; break; //5 = GBR
+    }
+    col.W = w;
+
+    switch (busType) {
+      case I_NONE: break;
+    #ifdef ESP8266
+      case I_8266_U0_NEO_3: (static_cast<B_8266_U0_NEO_3*>(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break;
+      case I_8266_U1_NEO_3: (static_cast<B_8266_U1_NEO_3*>(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break;
+      case I_8266_DM_NEO_3: (static_cast<B_8266_DM_NEO_3*>(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break;
+      case I_8266_BB_NEO_3: (static_cast<B_8266_BB_NEO_3*>(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break;
+      case I_8266_U0_NEO_4: (static_cast<B_8266_U0_NEO_4*>(busPtr))->SetPixelColor(pix, col); break;
+      case I_8266_U1_NEO_4: (static_cast<B_8266_U1_NEO_4*>(busPtr))->SetPixelColor(pix, col); break;
+      case I_8266_DM_NEO_4: (static_cast<B_8266_DM_NEO_4*>(busPtr))->SetPixelColor(pix, col); break;
+      case I_8266_BB_NEO_4: (static_cast<B_8266_BB_NEO_4*>(busPtr))->SetPixelColor(pix, col); break;
+      case I_8266_U0_400_3: (static_cast<B_8266_U0_400_3*>(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break;
+      case I_8266_U1_400_3: (static_cast<B_8266_U1_400_3*>(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break;
+      case I_8266_DM_400_3: (static_cast<B_8266_DM_400_3*>(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break;
+      case I_8266_BB_400_3: (static_cast<B_8266_BB_400_3*>(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break;
+      case I_8266_U0_TM1_4: (static_cast<B_8266_U0_TM1_4*>(busPtr))->SetPixelColor(pix, col); break;
+      case I_8266_U1_TM1_4: (static_cast<B_8266_U1_TM1_4*>(busPtr))->SetPixelColor(pix, col); break;
+      case I_8266_DM_TM1_4: (static_cast<B_8266_DM_TM1_4*>(busPtr))->SetPixelColor(pix, col); break;
+      case I_8266_BB_TM1_4: (static_cast<B_8266_BB_TM1_4*>(busPtr))->SetPixelColor(pix, col); break;
+    #endif
+    #ifdef ARDUINO_ARCH_ESP32
+      case I_32_R0_NEO_3: (static_cast<B_32_R0_NEO_3*>(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break;
+      case I_32_R1_NEO_3: (static_cast<B_32_R1_NEO_3*>(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break;
+      case I_32_R2_NEO_3: (static_cast<B_32_R2_NEO_3*>(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break;
+      case I_32_R3_NEO_3: (static_cast<B_32_R3_NEO_3*>(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break;
+      case I_32_R4_NEO_3: (static_cast<B_32_R4_NEO_3*>(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break;
+      case I_32_R5_NEO_3: (static_cast<B_32_R5_NEO_3*>(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break;
+      case I_32_R6_NEO_3: (static_cast<B_32_R6_NEO_3*>(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break;
+      case I_32_R7_NEO_3: (static_cast<B_32_R7_NEO_3*>(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break;
+      case I_32_I0_NEO_3: (static_cast<B_32_I0_NEO_3*>(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break;
+      case I_32_I1_NEO_3: (static_cast<B_32_I1_NEO_3*>(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break;
+      case I_32_R0_NEO_4: (static_cast<B_32_R0_NEO_4*>(busPtr))->SetPixelColor(pix, col); break;
+      case I_32_R1_NEO_4: (static_cast<B_32_R1_NEO_4*>(busPtr))->SetPixelColor(pix, col); break;
+      case I_32_R2_NEO_4: (static_cast<B_32_R2_NEO_4*>(busPtr))->SetPixelColor(pix, col); break;
+      case I_32_R3_NEO_4: (static_cast<B_32_R3_NEO_4*>(busPtr))->SetPixelColor(pix, col); break;
+      case I_32_R4_NEO_4: (static_cast<B_32_R4_NEO_4*>(busPtr))->SetPixelColor(pix, col); break;
+      case I_32_R5_NEO_4: (static_cast<B_32_R5_NEO_4*>(busPtr))->SetPixelColor(pix, col); break;
+      case I_32_R6_NEO_4: (static_cast<B_32_R6_NEO_4*>(busPtr))->SetPixelColor(pix, col); break;
+      case I_32_R7_NEO_4: (static_cast<B_32_R7_NEO_4*>(busPtr))->SetPixelColor(pix, col); break;
+      case I_32_I0_NEO_4: (static_cast<B_32_I0_NEO_4*>(busPtr))->SetPixelColor(pix, col); break;
+      case I_32_I1_NEO_4: (static_cast<B_32_I1_NEO_4*>(busPtr))->SetPixelColor(pix, col); break;
+      case I_32_R0_400_3: (static_cast<B_32_R0_400_3*>(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break;
+      case I_32_R1_400_3: (static_cast<B_32_R1_400_3*>(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break;
+      case I_32_R2_400_3: (static_cast<B_32_R2_400_3*>(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break;
+      case I_32_R3_400_3: (static_cast<B_32_R3_400_3*>(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break;
+      case I_32_R4_400_3: (static_cast<B_32_R4_400_3*>(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break;
+      case I_32_R5_400_3: (static_cast<B_32_R5_400_3*>(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break;
+      case I_32_R6_400_3: (static_cast<B_32_R6_400_3*>(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break;
+      case I_32_R7_400_3: (static_cast<B_32_R7_400_3*>(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break;
+      case I_32_I0_400_3: (static_cast<B_32_I0_400_3*>(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break;
+      case I_32_I1_400_3: (static_cast<B_32_I1_400_3*>(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break;
+      case I_32_R0_TM1_4: (static_cast<B_32_R0_TM1_4*>(busPtr))->SetPixelColor(pix, col); break;
+      case I_32_R1_TM1_4: (static_cast<B_32_R1_TM1_4*>(busPtr))->SetPixelColor(pix, col); break;
+      case I_32_R2_TM1_4: (static_cast<B_32_R2_TM1_4*>(busPtr))->SetPixelColor(pix, col); break;
+      case I_32_R3_TM1_4: (static_cast<B_32_R3_TM1_4*>(busPtr))->SetPixelColor(pix, col); break;
+      case I_32_R4_TM1_4: (static_cast<B_32_R4_TM1_4*>(busPtr))->SetPixelColor(pix, col); break;
+      case I_32_R5_TM1_4: (static_cast<B_32_R5_TM1_4*>(busPtr))->SetPixelColor(pix, col); break;
+      case I_32_R6_TM1_4: (static_cast<B_32_R6_TM1_4*>(busPtr))->SetPixelColor(pix, col); break;
+      case I_32_R7_TM1_4: (static_cast<B_32_R7_TM1_4*>(busPtr))->SetPixelColor(pix, col); break;
+      case I_32_I0_TM1_4: (static_cast<B_32_I0_TM1_4*>(busPtr))->SetPixelColor(pix, col); break;
+      case I_32_I1_TM1_4: (static_cast<B_32_I1_TM1_4*>(busPtr))->SetPixelColor(pix, col); break;
+    #endif
+      case I_HS_DOT_3: (static_cast<B_HS_DOT_3*>(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break;
+      case I_SS_DOT_3: (static_cast<B_SS_DOT_3*>(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break;
+      case I_HS_LPD_3: (static_cast<B_HS_LPD_3*>(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break;
+      case I_SS_LPD_3: (static_cast<B_SS_LPD_3*>(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break;
+      case I_HS_WS1_3: (static_cast<B_HS_WS1_3*>(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break;
+      case I_SS_WS1_3: (static_cast<B_SS_WS1_3*>(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break;
+      case I_HS_P98_3: (static_cast<B_HS_P98_3*>(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break;
+      case I_SS_P98_3: (static_cast<B_SS_P98_3*>(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break;
+    }
+  };
+  static void setBrightness(void* busPtr, uint8_t busType, uint8_t b) {
+    switch (busType) {
+      case I_NONE: break;
+    #ifdef ESP8266
+      case I_8266_U0_NEO_3: (static_cast<B_8266_U0_NEO_3*>(busPtr))->SetBrightness(b); break;
+      case I_8266_U1_NEO_3: (static_cast<B_8266_U1_NEO_3*>(busPtr))->SetBrightness(b); break;
+      case I_8266_DM_NEO_3: (static_cast<B_8266_DM_NEO_3*>(busPtr))->SetBrightness(b); break;
+      case I_8266_BB_NEO_3: (static_cast<B_8266_BB_NEO_3*>(busPtr))->SetBrightness(b); break;
+      case I_8266_U0_NEO_4: (static_cast<B_8266_U0_NEO_4*>(busPtr))->SetBrightness(b); break;
+      case I_8266_U1_NEO_4: (static_cast<B_8266_U1_NEO_4*>(busPtr))->SetBrightness(b); break;
+      case I_8266_DM_NEO_4: (static_cast<B_8266_DM_NEO_4*>(busPtr))->SetBrightness(b); break;
+      case I_8266_BB_NEO_4: (static_cast<B_8266_BB_NEO_4*>(busPtr))->SetBrightness(b); break;
+      case I_8266_U0_400_3: (static_cast<B_8266_U0_400_3*>(busPtr))->SetBrightness(b); break;
+      case I_8266_U1_400_3: (static_cast<B_8266_U1_400_3*>(busPtr))->SetBrightness(b); break;
+      case I_8266_DM_400_3: (static_cast<B_8266_DM_400_3*>(busPtr))->SetBrightness(b); break;
+      case I_8266_BB_400_3: (static_cast<B_8266_BB_400_3*>(busPtr))->SetBrightness(b); break;
+      case I_8266_U0_TM1_4: (static_cast<B_8266_U0_TM1_4*>(busPtr))->SetBrightness(b); break;
+      case I_8266_U1_TM1_4: (static_cast<B_8266_U1_TM1_4*>(busPtr))->SetBrightness(b); break;
+      case I_8266_DM_TM1_4: (static_cast<B_8266_DM_TM1_4*>(busPtr))->SetBrightness(b); break;
+      case I_8266_BB_TM1_4: (static_cast<B_8266_BB_TM1_4*>(busPtr))->SetBrightness(b); break;
+    #endif
+    #ifdef ARDUINO_ARCH_ESP32
+      case I_32_R0_NEO_3: (static_cast<B_32_R0_NEO_3*>(busPtr))->SetBrightness(b); break;
+      case I_32_R1_NEO_3: (static_cast<B_32_R1_NEO_3*>(busPtr))->SetBrightness(b); break;
+      case I_32_R2_NEO_3: (static_cast<B_32_R2_NEO_3*>(busPtr))->SetBrightness(b); break;
+      case I_32_R3_NEO_3: (static_cast<B_32_R3_NEO_3*>(busPtr))->SetBrightness(b); break;
+      case I_32_R4_NEO_3: (static_cast<B_32_R4_NEO_3*>(busPtr))->SetBrightness(b); break;
+      case I_32_R5_NEO_3: (static_cast<B_32_R5_NEO_3*>(busPtr))->SetBrightness(b); break;
+      case I_32_R6_NEO_3: (static_cast<B_32_R6_NEO_3*>(busPtr))->SetBrightness(b); break;
+      case I_32_R7_NEO_3: (static_cast<B_32_R7_NEO_3*>(busPtr))->SetBrightness(b); break;
+      case I_32_I0_NEO_3: (static_cast<B_32_I0_NEO_3*>(busPtr))->SetBrightness(b); break;
+      case I_32_I1_NEO_3: (static_cast<B_32_I1_NEO_3*>(busPtr))->SetBrightness(b); break;
+      case I_32_R0_NEO_4: (static_cast<B_32_R0_NEO_4*>(busPtr))->SetBrightness(b); break;
+      case I_32_R1_NEO_4: (static_cast<B_32_R1_NEO_4*>(busPtr))->SetBrightness(b); break;
+      case I_32_R2_NEO_4: (static_cast<B_32_R2_NEO_4*>(busPtr))->SetBrightness(b); break;
+      case I_32_R3_NEO_4: (static_cast<B_32_R3_NEO_4*>(busPtr))->SetBrightness(b); break;
+      case I_32_R4_NEO_4: (static_cast<B_32_R4_NEO_4*>(busPtr))->SetBrightness(b); break;
+      case I_32_R5_NEO_4: (static_cast<B_32_R5_NEO_4*>(busPtr))->SetBrightness(b); break;
+      case I_32_R6_NEO_4: (static_cast<B_32_R6_NEO_4*>(busPtr))->SetBrightness(b); break;
+      case I_32_R7_NEO_4: (static_cast<B_32_R7_NEO_4*>(busPtr))->SetBrightness(b); break;
+      case I_32_I0_NEO_4: (static_cast<B_32_I0_NEO_4*>(busPtr))->SetBrightness(b); break;
+      case I_32_I1_NEO_4: (static_cast<B_32_I1_NEO_4*>(busPtr))->SetBrightness(b); break;
+      case I_32_R0_400_3: (static_cast<B_32_R0_400_3*>(busPtr))->SetBrightness(b); break;
+      case I_32_R1_400_3: (static_cast<B_32_R1_400_3*>(busPtr))->SetBrightness(b); break;
+      case I_32_R2_400_3: (static_cast<B_32_R2_400_3*>(busPtr))->SetBrightness(b); break;
+      case I_32_R3_400_3: (static_cast<B_32_R3_400_3*>(busPtr))->SetBrightness(b); break;
+      case I_32_R4_400_3: (static_cast<B_32_R4_400_3*>(busPtr))->SetBrightness(b); break;
+      case I_32_R5_400_3: (static_cast<B_32_R5_400_3*>(busPtr))->SetBrightness(b); break;
+      case I_32_R6_400_3: (static_cast<B_32_R6_400_3*>(busPtr))->SetBrightness(b); break;
+      case I_32_R7_400_3: (static_cast<B_32_R7_400_3*>(busPtr))->SetBrightness(b); break;
+      case I_32_I0_400_3: (static_cast<B_32_I0_400_3*>(busPtr))->SetBrightness(b); break;
+      case I_32_I1_400_3: (static_cast<B_32_I1_400_3*>(busPtr))->SetBrightness(b); break;
+      case I_32_R0_TM1_4: (static_cast<B_32_R0_TM1_4*>(busPtr))->SetBrightness(b); break;
+      case I_32_R1_TM1_4: (static_cast<B_32_R1_TM1_4*>(busPtr))->SetBrightness(b); break;
+      case I_32_R2_TM1_4: (static_cast<B_32_R2_TM1_4*>(busPtr))->SetBrightness(b); break;
+      case I_32_R3_TM1_4: (static_cast<B_32_R3_TM1_4*>(busPtr))->SetBrightness(b); break;
+      case I_32_R4_TM1_4: (static_cast<B_32_R4_TM1_4*>(busPtr))->SetBrightness(b); break;
+      case I_32_R5_TM1_4: (static_cast<B_32_R5_TM1_4*>(busPtr))->SetBrightness(b); break;
+      case I_32_R6_TM1_4: (static_cast<B_32_R6_TM1_4*>(busPtr))->SetBrightness(b); break;
+      case I_32_R7_TM1_4: (static_cast<B_32_R7_TM1_4*>(busPtr))->SetBrightness(b); break;
+      case I_32_I0_TM1_4: (static_cast<B_32_I0_TM1_4*>(busPtr))->SetBrightness(b); break;
+      case I_32_I1_TM1_4: (static_cast<B_32_I1_TM1_4*>(busPtr))->SetBrightness(b); break;
+    #endif
+      case I_HS_DOT_3: (static_cast<B_HS_DOT_3*>(busPtr))->SetBrightness(b); break;
+      case I_SS_DOT_3: (static_cast<B_SS_DOT_3*>(busPtr))->SetBrightness(b); break;
+      case I_HS_LPD_3: (static_cast<B_HS_LPD_3*>(busPtr))->SetBrightness(b); break;
+      case I_SS_LPD_3: (static_cast<B_SS_LPD_3*>(busPtr))->SetBrightness(b); break;
+      case I_HS_WS1_3: (static_cast<B_HS_WS1_3*>(busPtr))->SetBrightness(b); break;
+      case I_SS_WS1_3: (static_cast<B_SS_WS1_3*>(busPtr))->SetBrightness(b); break;
+      case I_HS_P98_3: (static_cast<B_HS_P98_3*>(busPtr))->SetBrightness(b); break;
+      case I_SS_P98_3: (static_cast<B_SS_P98_3*>(busPtr))->SetBrightness(b); break;
+    }
+  };
+  static uint32_t getPixelColor(void* busPtr, uint8_t busType, uint16_t pix, uint8_t co) {
+    RgbwColor col(0,0,0,0); 
+    switch (busType) {
+      case I_NONE: break;
+    #ifdef ESP8266
+      case I_8266_U0_NEO_3: col = (static_cast<B_8266_U0_NEO_3*>(busPtr))->GetPixelColor(pix); break;
+      case I_8266_U1_NEO_3: col = (static_cast<B_8266_U1_NEO_3*>(busPtr))->GetPixelColor(pix); break;
+      case I_8266_DM_NEO_3: col = (static_cast<B_8266_DM_NEO_3*>(busPtr))->GetPixelColor(pix); break;
+      case I_8266_BB_NEO_3: col = (static_cast<B_8266_BB_NEO_3*>(busPtr))->GetPixelColor(pix); break;
+      case I_8266_U0_NEO_4: col = (static_cast<B_8266_U0_NEO_4*>(busPtr))->GetPixelColor(pix); break;
+      case I_8266_U1_NEO_4: col = (static_cast<B_8266_U1_NEO_4*>(busPtr))->GetPixelColor(pix); break;
+      case I_8266_DM_NEO_4: col = (static_cast<B_8266_DM_NEO_4*>(busPtr))->GetPixelColor(pix); break;
+      case I_8266_BB_NEO_4: col = (static_cast<B_8266_BB_NEO_4*>(busPtr))->GetPixelColor(pix); break;
+      case I_8266_U0_400_3: col = (static_cast<B_8266_U0_400_3*>(busPtr))->GetPixelColor(pix); break;
+      case I_8266_U1_400_3: col = (static_cast<B_8266_U1_400_3*>(busPtr))->GetPixelColor(pix); break;
+      case I_8266_DM_400_3: col = (static_cast<B_8266_DM_400_3*>(busPtr))->GetPixelColor(pix); break;
+      case I_8266_BB_400_3: col = (static_cast<B_8266_BB_400_3*>(busPtr))->GetPixelColor(pix); break;
+      case I_8266_U0_TM1_4: col = (static_cast<B_8266_U0_TM1_4*>(busPtr))->GetPixelColor(pix); break;
+      case I_8266_U1_TM1_4: col = (static_cast<B_8266_U1_TM1_4*>(busPtr))->GetPixelColor(pix); break;
+      case I_8266_DM_TM1_4: col = (static_cast<B_8266_DM_TM1_4*>(busPtr))->GetPixelColor(pix); break;
+      case I_8266_BB_TM1_4: col = (static_cast<B_8266_BB_TM1_4*>(busPtr))->GetPixelColor(pix); break;
+    #endif
+    #ifdef ARDUINO_ARCH_ESP32
+      case I_32_R0_NEO_3: col = (static_cast<B_32_R0_NEO_3*>(busPtr))->GetPixelColor(pix); break;
+      case I_32_R1_NEO_3: col = (static_cast<B_32_R1_NEO_3*>(busPtr))->GetPixelColor(pix); break;
+      case I_32_R2_NEO_3: col = (static_cast<B_32_R2_NEO_3*>(busPtr))->GetPixelColor(pix); break;
+      case I_32_R3_NEO_3: col = (static_cast<B_32_R3_NEO_3*>(busPtr))->GetPixelColor(pix); break;
+      case I_32_R4_NEO_3: col = (static_cast<B_32_R4_NEO_3*>(busPtr))->GetPixelColor(pix); break;
+      case I_32_R5_NEO_3: col = (static_cast<B_32_R5_NEO_3*>(busPtr))->GetPixelColor(pix); break;
+      case I_32_R6_NEO_3: col = (static_cast<B_32_R6_NEO_3*>(busPtr))->GetPixelColor(pix); break;
+      case I_32_R7_NEO_3: col = (static_cast<B_32_R7_NEO_3*>(busPtr))->GetPixelColor(pix); break;
+      case I_32_I0_NEO_3: col = (static_cast<B_32_I0_NEO_3*>(busPtr))->GetPixelColor(pix); break;
+      case I_32_I1_NEO_3: col = (static_cast<B_32_I1_NEO_3*>(busPtr))->GetPixelColor(pix); break;
+      case I_32_R0_NEO_4: col = (static_cast<B_32_R0_NEO_4*>(busPtr))->GetPixelColor(pix); break;
+      case I_32_R1_NEO_4: col = (static_cast<B_32_R1_NEO_4*>(busPtr))->GetPixelColor(pix); break;
+      case I_32_R2_NEO_4: col = (static_cast<B_32_R2_NEO_4*>(busPtr))->GetPixelColor(pix); break;
+      case I_32_R3_NEO_4: col = (static_cast<B_32_R3_NEO_4*>(busPtr))->GetPixelColor(pix); break;
+      case I_32_R4_NEO_4: col = (static_cast<B_32_R4_NEO_4*>(busPtr))->GetPixelColor(pix); break;
+      case I_32_R5_NEO_4: col = (static_cast<B_32_R5_NEO_4*>(busPtr))->GetPixelColor(pix); break;
+      case I_32_R6_NEO_4: col = (static_cast<B_32_R6_NEO_4*>(busPtr))->GetPixelColor(pix); break;
+      case I_32_R7_NEO_4: col = (static_cast<B_32_R7_NEO_4*>(busPtr))->GetPixelColor(pix); break;
+      case I_32_I0_NEO_4: col = (static_cast<B_32_I0_NEO_4*>(busPtr))->GetPixelColor(pix); break;
+      case I_32_I1_NEO_4: col = (static_cast<B_32_I1_NEO_4*>(busPtr))->GetPixelColor(pix); break;
+      case I_32_R0_400_3: col = (static_cast<B_32_R0_400_3*>(busPtr))->GetPixelColor(pix); break;
+      case I_32_R1_400_3: col = (static_cast<B_32_R1_400_3*>(busPtr))->GetPixelColor(pix); break;
+      case I_32_R2_400_3: col = (static_cast<B_32_R2_400_3*>(busPtr))->GetPixelColor(pix); break;
+      case I_32_R3_400_3: col = (static_cast<B_32_R3_400_3*>(busPtr))->GetPixelColor(pix); break;
+      case I_32_R4_400_3: col = (static_cast<B_32_R4_400_3*>(busPtr))->GetPixelColor(pix); break;
+      case I_32_R5_400_3: col = (static_cast<B_32_R5_400_3*>(busPtr))->GetPixelColor(pix); break;
+      case I_32_R6_400_3: col = (static_cast<B_32_R6_400_3*>(busPtr))->GetPixelColor(pix); break;
+      case I_32_R7_400_3: col = (static_cast<B_32_R7_400_3*>(busPtr))->GetPixelColor(pix); break;
+      case I_32_I0_400_3: col = (static_cast<B_32_I0_400_3*>(busPtr))->GetPixelColor(pix); break;
+      case I_32_I1_400_3: col = (static_cast<B_32_I1_400_3*>(busPtr))->GetPixelColor(pix); break;
+      case I_32_R0_TM1_4: col = (static_cast<B_32_R0_TM1_4*>(busPtr))->GetPixelColor(pix); break;
+      case I_32_R1_TM1_4: col = (static_cast<B_32_R1_TM1_4*>(busPtr))->GetPixelColor(pix); break;
+      case I_32_R2_TM1_4: col = (static_cast<B_32_R2_TM1_4*>(busPtr))->GetPixelColor(pix); break;
+      case I_32_R3_TM1_4: col = (static_cast<B_32_R3_TM1_4*>(busPtr))->GetPixelColor(pix); break;
+      case I_32_R4_TM1_4: col = (static_cast<B_32_R4_TM1_4*>(busPtr))->GetPixelColor(pix); break;
+      case I_32_R5_TM1_4: col = (static_cast<B_32_R5_TM1_4*>(busPtr))->GetPixelColor(pix); break;
+      case I_32_R6_TM1_4: col = (static_cast<B_32_R6_TM1_4*>(busPtr))->GetPixelColor(pix); break;
+      case I_32_R7_TM1_4: col = (static_cast<B_32_R7_TM1_4*>(busPtr))->GetPixelColor(pix); break;
+      case I_32_I0_TM1_4: col = (static_cast<B_32_I0_TM1_4*>(busPtr))->GetPixelColor(pix); break;
+      case I_32_I1_TM1_4: col = (static_cast<B_32_I1_TM1_4*>(busPtr))->GetPixelColor(pix); break;
+    #endif
+      case I_HS_DOT_3: col = (static_cast<B_HS_DOT_3*>(busPtr))->GetPixelColor(pix); break;
+      case I_SS_DOT_3: col = (static_cast<B_SS_DOT_3*>(busPtr))->GetPixelColor(pix); break;
+      case I_HS_LPD_3: col = (static_cast<B_HS_LPD_3*>(busPtr))->GetPixelColor(pix); break;
+      case I_SS_LPD_3: col = (static_cast<B_SS_LPD_3*>(busPtr))->GetPixelColor(pix); break;
+      case I_HS_WS1_3: col = (static_cast<B_HS_WS1_3*>(busPtr))->GetPixelColor(pix); break;
+      case I_SS_WS1_3: col = (static_cast<B_SS_WS1_3*>(busPtr))->GetPixelColor(pix); break;
+      case I_HS_P98_3: col = (static_cast<B_HS_P98_3*>(busPtr))->GetPixelColor(pix); break;
+      case I_SS_P98_3: col = (static_cast<B_SS_P98_3*>(busPtr))->GetPixelColor(pix); break;
+    }
+    
+    #ifdef COLOR_ORDER_OVERRIDE
+    if (indexPixel >= COO_MIN && indexPixel < COO_MAX) co = COO_ORDER;
+    #endif
+
+    switch (co)
+    {
+      //                    W               G              R               B
+      case  0: return ((col.W << 24) | (col.G << 8) | (col.R << 16) | (col.B)); //0 = GRB, default
+      case  1: return ((col.W << 24) | (col.R << 8) | (col.G << 16) | (col.B)); //1 = RGB, common for WS2811
+      case  2: return ((col.W << 24) | (col.B << 8) | (col.R << 16) | (col.G)); //2 = BRG
+      case  3: return ((col.W << 24) | (col.B << 8) | (col.G << 16) | (col.R)); //3 = RBG
+      case  4: return ((col.W << 24) | (col.R << 8) | (col.B << 16) | (col.G)); //4 = BGR
+      case  5: return ((col.W << 24) | (col.G << 8) | (col.B << 16) | (col.R)); //5 = GBR
+    }
+    return 0;
+  }
+
+  static void cleanup(void* busPtr, uint8_t busType) {
+    if (busPtr == nullptr) return;
+    switch (busType) {
+      case I_NONE: break;
+    #ifdef ESP8266
+      case I_8266_U0_NEO_3: delete (static_cast<B_8266_U0_NEO_3*>(busPtr)); break;
+      case I_8266_U1_NEO_3: delete (static_cast<B_8266_U1_NEO_3*>(busPtr)); break;
+      case I_8266_DM_NEO_3: delete (static_cast<B_8266_DM_NEO_3*>(busPtr)); break;
+      case I_8266_BB_NEO_3: delete (static_cast<B_8266_BB_NEO_3*>(busPtr)); break;
+      case I_8266_U0_NEO_4: delete (static_cast<B_8266_U0_NEO_4*>(busPtr)); break;
+      case I_8266_U1_NEO_4: delete (static_cast<B_8266_U1_NEO_4*>(busPtr)); break;
+      case I_8266_DM_NEO_4: delete (static_cast<B_8266_DM_NEO_4*>(busPtr)); break;
+      case I_8266_BB_NEO_4: delete (static_cast<B_8266_BB_NEO_4*>(busPtr)); break;
+      case I_8266_U0_400_3: delete (static_cast<B_8266_U0_400_3*>(busPtr)); break;
+      case I_8266_U1_400_3: delete (static_cast<B_8266_U1_400_3*>(busPtr)); break;
+      case I_8266_DM_400_3: delete (static_cast<B_8266_DM_400_3*>(busPtr)); break;
+      case I_8266_BB_400_3: delete (static_cast<B_8266_BB_400_3*>(busPtr)); break;
+      case I_8266_U0_TM1_4: delete (static_cast<B_8266_U0_TM1_4*>(busPtr)); break;
+      case I_8266_U1_TM1_4: delete (static_cast<B_8266_U1_TM1_4*>(busPtr)); break;
+      case I_8266_DM_TM1_4: delete (static_cast<B_8266_DM_TM1_4*>(busPtr)); break;
+      case I_8266_BB_TM1_4: delete (static_cast<B_8266_BB_TM1_4*>(busPtr)); break;
+    #endif
+    #ifdef ARDUINO_ARCH_ESP32
+      case I_32_R0_NEO_3: delete (static_cast<B_32_R0_NEO_3*>(busPtr)); break;
+      case I_32_R1_NEO_3: delete (static_cast<B_32_R1_NEO_3*>(busPtr)); break;
+      case I_32_R2_NEO_3: delete (static_cast<B_32_R2_NEO_3*>(busPtr)); break;
+      case I_32_R3_NEO_3: delete (static_cast<B_32_R3_NEO_3*>(busPtr)); break;
+      case I_32_R4_NEO_3: delete (static_cast<B_32_R4_NEO_3*>(busPtr)); break;
+      case I_32_R5_NEO_3: delete (static_cast<B_32_R5_NEO_3*>(busPtr)); break;
+      case I_32_R6_NEO_3: delete (static_cast<B_32_R6_NEO_3*>(busPtr)); break;
+      case I_32_R7_NEO_3: delete (static_cast<B_32_R7_NEO_3*>(busPtr)); break;
+      case I_32_I0_NEO_3: delete (static_cast<B_32_I0_NEO_3*>(busPtr)); break;
+      case I_32_I1_NEO_3: delete (static_cast<B_32_I1_NEO_3*>(busPtr)); break;
+      case I_32_R0_NEO_4: delete (static_cast<B_32_R0_NEO_4*>(busPtr)); break;
+      case I_32_R1_NEO_4: delete (static_cast<B_32_R1_NEO_4*>(busPtr)); break;
+      case I_32_R2_NEO_4: delete (static_cast<B_32_R2_NEO_4*>(busPtr)); break;
+      case I_32_R3_NEO_4: delete (static_cast<B_32_R3_NEO_4*>(busPtr)); break;
+      case I_32_R4_NEO_4: delete (static_cast<B_32_R4_NEO_4*>(busPtr)); break;
+      case I_32_R5_NEO_4: delete (static_cast<B_32_R5_NEO_4*>(busPtr)); break;
+      case I_32_R6_NEO_4: delete (static_cast<B_32_R6_NEO_4*>(busPtr)); break;
+      case I_32_R7_NEO_4: delete (static_cast<B_32_R7_NEO_4*>(busPtr)); break;
+      case I_32_I0_NEO_4: delete (static_cast<B_32_I0_NEO_4*>(busPtr)); break;
+      case I_32_I1_NEO_4: delete (static_cast<B_32_I1_NEO_4*>(busPtr)); break;
+      case I_32_R0_400_3: delete (static_cast<B_32_R0_400_3*>(busPtr)); break;
+      case I_32_R1_400_3: delete (static_cast<B_32_R1_400_3*>(busPtr)); break;
+      case I_32_R2_400_3: delete (static_cast<B_32_R2_400_3*>(busPtr)); break;
+      case I_32_R3_400_3: delete (static_cast<B_32_R3_400_3*>(busPtr)); break;
+      case I_32_R4_400_3: delete (static_cast<B_32_R4_400_3*>(busPtr)); break;
+      case I_32_R5_400_3: delete (static_cast<B_32_R5_400_3*>(busPtr)); break;
+      case I_32_R6_400_3: delete (static_cast<B_32_R6_400_3*>(busPtr)); break;
+      case I_32_R7_400_3: delete (static_cast<B_32_R7_400_3*>(busPtr)); break;
+      case I_32_I0_400_3: delete (static_cast<B_32_I0_400_3*>(busPtr)); break;
+      case I_32_I1_400_3: delete (static_cast<B_32_I1_400_3*>(busPtr)); break;
+      case I_32_R0_TM1_4: delete (static_cast<B_32_R0_TM1_4*>(busPtr)); break;
+      case I_32_R1_TM1_4: delete (static_cast<B_32_R1_TM1_4*>(busPtr)); break;
+      case I_32_R2_TM1_4: delete (static_cast<B_32_R2_TM1_4*>(busPtr)); break;
+      case I_32_R3_TM1_4: delete (static_cast<B_32_R3_TM1_4*>(busPtr)); break;
+      case I_32_R4_TM1_4: delete (static_cast<B_32_R4_TM1_4*>(busPtr)); break;
+      case I_32_R5_TM1_4: delete (static_cast<B_32_R5_TM1_4*>(busPtr)); break;
+      case I_32_R6_TM1_4: delete (static_cast<B_32_R6_TM1_4*>(busPtr)); break;
+      case I_32_R7_TM1_4: delete (static_cast<B_32_R7_TM1_4*>(busPtr)); break;
+      case I_32_I0_TM1_4: delete (static_cast<B_32_I0_TM1_4*>(busPtr)); break;
+      case I_32_I1_TM1_4: delete (static_cast<B_32_I1_TM1_4*>(busPtr)); break;
+    #endif
+      case I_HS_DOT_3: delete (static_cast<B_HS_DOT_3*>(busPtr)); break;
+      case I_SS_DOT_3: delete (static_cast<B_SS_DOT_3*>(busPtr)); break;
+      case I_HS_LPD_3: delete (static_cast<B_HS_LPD_3*>(busPtr)); break;
+      case I_SS_LPD_3: delete (static_cast<B_SS_LPD_3*>(busPtr)); break;
+      case I_HS_WS1_3: delete (static_cast<B_HS_WS1_3*>(busPtr)); break;
+      case I_SS_WS1_3: delete (static_cast<B_SS_WS1_3*>(busPtr)); break;
+      case I_HS_P98_3: delete (static_cast<B_HS_P98_3*>(busPtr)); break;
+      case I_SS_P98_3: delete (static_cast<B_SS_P98_3*>(busPtr)); break;
+    }
+  }
+
+  //gives back the internal type index (I_XX_XXX_X above) for the input 
+  static uint8_t getI(uint8_t busType, uint8_t* pins, uint8_t num = 0) {
+    if (!IS_DIGITAL(busType)) return I_NONE;
+    if (IS_2PIN(busType)) { //SPI LED chips
+      bool isHSPI = false;
+      #ifdef ESP8266
+      if (pins[0] == P_8266_HS_MOSI && pins[1] == P_8266_HS_CLK) isHSPI = true;
+      #else
+        if(!num) isHSPI = true; // temporary hack to limit use of hardware SPI to a single SPI peripheral: only allow ESP32 hardware serial on segment 0
+      #endif
+      uint8_t t = I_NONE;
+      switch (busType) {
+        case TYPE_APA102:  t = I_SS_DOT_3; break;
+        case TYPE_LPD8806: t = I_SS_LPD_3; break;
+        case TYPE_WS2801:  t = I_SS_WS1_3; break;
+        case TYPE_P9813:   t = I_SS_P98_3; break;
+        default: t=I_NONE;
+      }
+      if (t > I_NONE && isHSPI) t--; //hardware SPI has one smaller ID than software
+      return t;
+    } else {
+      #ifdef ESP8266
+      uint8_t offset = pins[0] -1; //for driver: 0 = uart0, 1 = uart1, 2 = dma, 3 = bitbang
+      if (offset > 3) offset = 3;
+      switch (busType) {
+        case TYPE_WS2812_RGB:
+        case TYPE_WS2812_WWA:
+          return I_8266_U0_NEO_3 + offset;
+        case TYPE_SK6812_RGBW:
+          return I_8266_U0_NEO_4 + offset;
+        case TYPE_WS2811_400KHZ:
+          return I_8266_U0_400_3 + offset;
+      }
+      #else //ESP32
+      uint8_t offset = num; //RMT bus # == bus index in BusManager
+      if (offset > 9) return I_NONE;
+      switch (busType) {
+        case TYPE_WS2812_RGB:
+        case TYPE_WS2812_WWA:
+          return I_32_R0_NEO_3 + offset;
+        case TYPE_SK6812_RGBW:
+          return I_32_R0_NEO_4 + offset;
+        case TYPE_WS2811_400KHZ:
+          return I_32_R0_400_3 + offset;
+      }
+      #endif
+    }
+    return I_NONE;
+  }
+};
+
+#endif

wled00/button.cpp

@@ -17,9 +17,7 @@ void shortPressAction()
 
 bool isButtonPressed()
 {
-  #if defined(BTNPIN) && BTNPIN > -1
+  if (btnPin>=0 && digitalRead(btnPin) == LOW) return true;
-    if (digitalRead(BTNPIN) == LOW) return true;
-  #endif
   #ifdef TOUCHPIN
     if (touchRead(TOUCHPIN) <= TOUCH_THRESHOLD) return true;
   #endif
@@ -29,8 +27,7 @@ bool isButtonPressed()
 
 void handleButton()
 {
-#if (defined(BTNPIN) && BTNPIN > -1) || defined(TOUCHPIN)
+  if (btnPin<0 || !buttonEnabled) return;
-  if (!buttonEnabled) return;
 
   if (isButtonPressed()) //pressed
   {
@@ -75,7 +72,6 @@ void handleButton()
     buttonWaitTime = 0;
     shortPressAction();
   }
-#endif
 }
 
 void handleIO()
@@ -88,37 +84,39 @@ void handleIO()
     lastOnTime = millis();
     if (offMode)
     {
-      #if RLYPIN >= 0
+      if (rlyPin>=0) {
-       digitalWrite(RLYPIN, RLYMDE);
+        pinMode(rlyPin, OUTPUT);
-      #endif
+        digitalWrite(rlyPin, rlyMde);
+      }
       offMode = false;
     }
   } else if (millis() - lastOnTime > 600)
   {
-     if (!offMode) {
+    if (!offMode) {
-      #if LEDPIN == LED_BUILTIN
+      #ifdef ESP8266
-        pinMode(LED_BUILTIN, OUTPUT);
+      //turn off built-in LED if strip is turned off
-        digitalWrite(LED_BUILTIN, HIGH);
+      pinMode(LED_BUILTIN, OUTPUT);
+      digitalWrite(LED_BUILTIN, HIGH);
       #endif
-      #if RLYPIN >= 0
+      if (rlyPin>=0) {
-       digitalWrite(RLYPIN, !RLYMDE);
+        pinMode(rlyPin, OUTPUT);
-      #endif
+        digitalWrite(rlyPin, !rlyMde);
-     }
+      }
+    }
     offMode = true;
   }
 
-  #if AUXPIN >= 0
   //output
-  if (auxActive || auxActiveBefore)
+  if (auxPin>=1 && (auxActive || auxActiveBefore))
   {
     if (!auxActiveBefore)
     {
       auxActiveBefore = true;
       switch (auxTriggeredState)
       {
-        case 0: pinMode(AUXPIN, INPUT); break;
+        case 0: pinMode(auxPin, INPUT); break;
-        case 1: pinMode(AUXPIN, OUTPUT); digitalWrite(AUXPIN, HIGH); break;
+        case 1: pinMode(auxPin, OUTPUT); digitalWrite(auxPin, HIGH); break;
-        case 2: pinMode(AUXPIN, OUTPUT); digitalWrite(AUXPIN, LOW); break;
+        case 2: pinMode(auxPin, OUTPUT); digitalWrite(auxPin, LOW); break;
       }
       auxStartTime = millis();
     }
@@ -128,11 +126,10 @@ void handleIO()
       auxActiveBefore = false;
       switch (auxDefaultState)
       {
-        case 0: pinMode(AUXPIN, INPUT); break;
+        case 0: pinMode(auxPin, INPUT); break;
-        case 1: pinMode(AUXPIN, OUTPUT); digitalWrite(AUXPIN, HIGH); break;
+        case 1: pinMode(auxPin, OUTPUT); digitalWrite(auxPin, HIGH); break;
-        case 2: pinMode(AUXPIN, OUTPUT); digitalWrite(AUXPIN, LOW); break;
+        case 2: pinMode(auxPin, OUTPUT); digitalWrite(auxPin, LOW); break;
       }
     }
   }
-  #endif
 }

wled00/cfg.cpp

@@ -30,8 +30,6 @@ void deserializeConfig() {
     return;
   }
 
-  //deserializeJson(doc, json);
-
   //int rev_major = doc[F("rev")][0]; // 1
   //int rev_minor = doc[F("rev")][1]; // 0
 
@@ -89,7 +87,9 @@ void deserializeConfig() {
 
   JsonObject hw = doc[F("hw")];
 
+  // initialize LED pins and lengths prior to other HW
   JsonObject hw_led = hw[F("led")];
+
   CJSON(ledCount, hw_led[F("total")]);
   if (ledCount > MAX_LEDS) ledCount = MAX_LEDS;
 
@@ -98,22 +98,51 @@ void deserializeConfig() {
   CJSON(strip.reverseMode, hw_led[F("rev")]);
   CJSON(strip.rgbwMode, hw_led[F("rgbwm")]);
 
-  JsonObject hw_led_ins_0 = hw_led[F("ins")][0];
+  JsonArray ins = hw_led["ins"];
-  //bool hw_led_ins_0_en = hw_led_ins_0[F("en")]; // true
+  uint8_t s = 0;
-  //int hw_led_ins_0_start = hw_led_ins_0[F("start")]; // 0
+  useRGBW = false;
-  //int hw_led_ins_0_len = hw_led_ins_0[F("len")]; // 1200
+  busses.removeAll();
+  for (JsonObject elm : ins) {
+    if (s >= WLED_MAX_BUSSES) break;
+    uint8_t pins[5] = {255, 255, 255, 255, 255};
+    JsonArray pinArr = elm[F("pin")];
+    if (pinArr.size() == 0) continue;
+    pins[0] = pinArr[0];
+    uint8_t i = 0;
+    for (int p : pinArr) {
+      pins[i] = p;
+      i++;
+      if (i>4) break;
+    }
 
-  //int hw_led_ins_0_pin_0 = hw_led_ins_0[F("pin")][0]; // 2
+    uint16_t length = elm[F("len")];
-
+    if (length==0) continue;
-  strip.setColorOrder(hw_led_ins_0[F("order")]);
+    uint8_t colorOrder = (int)elm[F("order")];
-  //bool hw_led_ins_0_rev = hw_led_ins_0[F("rev")]; // false
+    //only use skip from the first strip (this shouldn't have been in ins obj. but remains here for compatibility)
-  skipFirstLed = hw_led_ins_0[F("skip")]; // 0
+    if (s==0) skipFirstLed = elm[F("skip")];
-  useRGBW = (hw_led_ins_0[F("type")] == TYPE_SK6812_RGBW);
+    uint16_t start = elm[F("start")] | 0;
+    if (start >= ledCount) continue;
+    //limit length of strip if it would exceed total configured LEDs
+    if (start + length > ledCount) length = ledCount - start;
+    uint8_t ledType = elm[F("type")] | TYPE_WS2812_RGB;
+    bool reversed = elm[F("rev")];
+    //RGBW mode is enabled if at least one of the strips is RGBW
+    useRGBW = (useRGBW || BusManager::isRgbw(ledType));
+    s++;
+    BusConfig bc = BusConfig(ledType, pins, start, length, colorOrder, reversed);
+    busses.add(bc);
+  }
+  strip.finalizeInit(useRGBW, ledCount, skipFirstLed);
 
   JsonObject hw_btn_ins_0 = hw[F("btn")][F("ins")][0];
-  buttonEnabled = hw_btn_ins_0[F("en")] | buttonEnabled;
+  CJSON(buttonEnabled, hw_btn_ins_0[F("type")]);
-
+  int hw_btn_pin = hw_btn_ins_0[F("pin")][0];
-  //int hw_btn_ins_0_pin_0 = hw_btn_ins_0[F("pin")][0]; // 0
+  if (pinManager.allocatePin(hw_btn_pin,false)) {
+    btnPin = hw_btn_pin;
+    pinMode(btnPin, INPUT_PULLUP);
+  } else {
+    btnPin = -1;
+  }
 
   JsonArray hw_btn_ins_0_macros = hw_btn_ins_0[F("macros")];
   CJSON(macroButton, hw_btn_ins_0_macros[0]);
@@ -122,11 +151,24 @@ void deserializeConfig() {
 
   //int hw_btn_ins_0_type = hw_btn_ins_0[F("type")]; // 0
 
-  //int hw_ir_pin = hw[F("ir")][F("pin")]; // 4
+  #ifndef WLED_DISABLE_INFRARED
-  CJSON(irEnabled, hw[F("ir")][F("type")]); // 0
+  int hw_ir_pin = hw[F("ir")][F("pin")]; // 4
+  if (pinManager.allocatePin(hw_ir_pin,false)) {
+    irPin = hw_ir_pin;
+  } else {
+    irPin = -1;
+  }
+  #endif
+  CJSON(irEnabled, hw[F("ir")][F("type")]);
 
-  //int hw_relay_pin = hw[F("relay")][F("pin")]; // 12
+  int hw_relay_pin = hw[F("relay")][F("pin")];
-  //bool hw_relay_rev = hw[F("relay")][F("rev")]; // false
+  if (pinManager.allocatePin(hw_relay_pin,true)) {
+    rlyPin = hw_relay_pin;
+    pinMode(rlyPin, OUTPUT);
+  } else {
+    rlyPin = -1;
+  }
+  CJSON(rlyMde, hw[F("relay")][F("rev")]);
 
   //int hw_status_pin = hw[F("status")][F("pin")]; // -1
 
@@ -404,70 +446,57 @@ void serializeConfig() {
 
   JsonArray hw_led_ins = hw_led.createNestedArray("ins");
 
-  JsonObject hw_led_ins_0 = hw_led_ins.createNestedObject();
+  uint16_t start = 0;
-  hw_led_ins_0[F("en")] = true;
+  for (uint8_t s = 0; s < busses.getNumBusses(); s++) {
-  hw_led_ins_0[F("start")] = 0;
+    Bus *bus = busses.getBus(s);
-  hw_led_ins_0[F("len")] = ledCount;
+    if (!bus || bus->getLength()==0) break;
-  JsonArray hw_led_ins_0_pin = hw_led_ins_0.createNestedArray("pin");
+    JsonObject ins = hw_led_ins.createNestedObject();
-  hw_led_ins_0_pin.add(LEDPIN);
+    ins[F("en")] = true;
-  #ifdef DATAPIN
+    ins[F("start")] = bus->getStart();
-  hw_led_ins_0_pin.add(DATAPIN);
+    ins[F("len")] = bus->getLength();
-  #endif
+    JsonArray ins_pin = ins.createNestedArray("pin");
-  hw_led_ins_0[F("order")] = strip.getColorOrder();
+    uint8_t pins[5];
-  hw_led_ins_0[F("rev")] = false;
+    uint8_t nPins = bus->getPins(pins);
-  hw_led_ins_0[F("skip")] = skipFirstLed ? 1 : 0;
+    for (uint8_t i = 0; i < nPins; i++) ins_pin.add(pins[i]);
-
+    ins[F("order")] = bus->getColorOrder();
-  //this is very crude and temporary
+    ins[F("rev")] = bus->reversed;
-  byte ledType = TYPE_WS2812_RGB;
+    ins[F("skip")] = (skipFirstLed && s == 0) ? 1 : 0;
-  if (useRGBW) ledType = TYPE_SK6812_RGBW;
+    ins[F("type")] = bus->getType();
-  #ifdef USE_WS2801
+  }
-    ledType = TYPE_WS2801;
-  #endif
-  #ifdef USE_APA102
-    ledType = TYPE_APA102;
-  #endif
-  #ifdef USE_LPD8806
-    ledType = TYPE_LPD8806;
-  #endif
-  #ifdef USE_P9813
-    ledType = TYPE_P9813;
-  #endif
-  #ifdef USE_TM1814
-    ledType = TYPE_TM1814;
-  #endif
-
-  hw_led_ins_0[F("type")] = ledType;
 
   JsonObject hw_btn = hw.createNestedObject("btn");
 
   JsonArray hw_btn_ins = hw_btn.createNestedArray("ins");
 
-  #if defined(BTNPIN) && BTNPIN > -1
+  // button BTNPIN
   JsonObject hw_btn_ins_0 = hw_btn_ins.createNestedObject();
   hw_btn_ins_0[F("type")] = (buttonEnabled) ? BTN_TYPE_PUSH : BTN_TYPE_NONE;
 
   JsonArray hw_btn_ins_0_pin = hw_btn_ins_0.createNestedArray("pin");
-  hw_btn_ins_0_pin.add(BTNPIN);
+  hw_btn_ins_0_pin.add(btnPin);
 
   JsonArray hw_btn_ins_0_macros = hw_btn_ins_0.createNestedArray("macros");
   hw_btn_ins_0_macros.add(macroButton);
   hw_btn_ins_0_macros.add(macroLongPress);
   hw_btn_ins_0_macros.add(macroDoublePress);
+
+  #ifndef WLED_DISABLE_INFRARED
+  if (irPin>=0) {
+    JsonObject hw_ir = hw.createNestedObject("ir");
+    hw_ir[F("pin")] = irPin;
+    hw_ir[F("type")] = irEnabled;              // the byte 'irEnabled' does contain the IR-Remote Type ( 0=disabled )
+  }
   #endif
 
-  #if defined(IRPIN) && IRPIN > -1
-  JsonObject hw_ir = hw.createNestedObject("ir");
-  hw_ir[F("pin")] = IRPIN;
-  hw_ir[F("type")] = irEnabled;              // the byte 'irEnabled' does contain the IR-Remote Type ( 0=disabled )
-  #endif
-
-  #if defined(RLYPIN) && RLYPIN > -1
   JsonObject hw_relay = hw.createNestedObject("relay");
-  hw_relay[F("pin")] = RLYPIN;
+  hw_relay[F("pin")] = rlyPin;
-  hw_relay[F("rev")] = (RLYMDE) ? false : true;
+  hw_relay[F("rev")] = rlyMde;
-  JsonObject hw_status = hw.createNestedObject("status");
+
-  hw_status[F("pin")] = -1;
+  //JsonObject hw_status = hw.createNestedObject("status");
-  #endif
+  //hw_status[F("pin")] = -1;
+
+  JsonObject hw_aux = hw.createNestedObject("aux");
+  hw_aux[F("pin")] = auxPin;
 
   JsonObject light = doc.createNestedObject("light");
   light[F("scale-bri")] = briMultiplier;

wled00/const.h

@@ -13,6 +13,12 @@
 //increase if you need more
 #define WLED_MAX_USERMODS 4
 
+#ifdef ESP8266
+#define WLED_MAX_BUSSES 3
+#else
+#define WLED_MAX_BUSSES 10
+#endif
+
 //Usermod IDs
 #define USERMOD_ID_RESERVED       0            //Unused. Might indicate no usermod present
 #define USERMOD_ID_UNSPECIFIED    1            //Default value for a general user mod that does not specify a custom ID
@@ -95,6 +101,7 @@
 #define TYPE_GS8608              23            //same driver as WS2812, but will require signal 2x per second (else displays test pattern)
 #define TYPE_WS2811_400KHZ       24            //half-speed WS2812 protocol, used by very old WS2811 units
 #define TYPE_SK6812_RGBW         30
+#define TYPE_TM1814              31
 //"Analog" types (PWM) (32-47)
 #define TYPE_ONOFF               40            //binary output (relays etc.)
 #define TYPE_ANALOG_1CH          41            //single channel PWM. Uses value of brightest RGBW channel
@@ -107,8 +114,11 @@
 #define TYPE_APA102              51
 #define TYPE_LPD8806             52
 #define TYPE_P9813               53
-#define TYPE_TM1814              54
 
+#define IS_DIGITAL(t) (t & 0x10) //digital are 16-31 and 48-63
+#define IS_PWM(t)     (t > 40 && t < 46)
+#define NUM_PWM_PINS(t) (t - 40) //for analog PWM 41-45 only
+#define IS_2PIN(t)      (t > 47)
 
 //Color orders
 #define COL_ORDER_GRB             0           //GRB(w),defaut
@@ -159,6 +169,9 @@
 #define ERR_FS_QUOTA    11  // The FS is full or the maximum file size is reached
 #define ERR_FS_PLOAD    12  // It was attempted to load a preset that does not exist
 #define ERR_FS_GENERAL  19  // A general unspecified filesystem error occured
+#define ERR_OVERTEMP    30  // An attached temperature sensor has measured above threshold temperature (not implemented)
+#define ERR_OVERCURRENT 31  // An attached current sensor has measured a current above the threshold (not implemented)
+#define ERR_UNDERVOLT   32  // An attached voltmeter has measured a voltage below the threshold (not implemented)
 
 //Timer mode types
 #define NL_MODE_SET               0            //After nightlight time elapsed, set to target brightness
@@ -171,7 +184,11 @@
 
 // maximum number of LEDs - more than 1500 LEDs (or 500 DMA "LEDPIN 3" driven ones) will cause a low memory condition on ESP8266
 #ifndef MAX_LEDS
-#define MAX_LEDS 1500
+#ifdef ESP8266
+#define MAX_LEDS 1536
+#else
+#define MAX_LEDS 8192
+#endif
 #endif
 
 #define MAX_LEDS_DMA 500
@@ -181,7 +198,11 @@
 
 #define E131_MAX_UNIVERSE_COUNT 9
 
-#define ABL_MILLIAMPS_DEFAULT 850; // auto lower brightness to stay close to milliampere limit
+#define ABL_MILLIAMPS_DEFAULT 850  // auto lower brightness to stay close to milliampere limit
+
+// PWM settings
+#define WLED_PWM_FREQ_ESP8266  880 //PWM frequency proven as good for LEDs
+#define WLED_PWM_FREQ_ESP32   5000
 
 
 #define TOUCH_THRESHOLD 32 // limit to recognize a touch, higher value means more sensitive
@@ -193,4 +214,9 @@
   #define JSON_BUFFER_SIZE 16384
 #endif
 
+//this is merely a default now and can be changed at runtime
+#ifndef LEDPIN
+#define LEDPIN 2
+#endif
+
 #endif

wled00/data/index.js

@@ -464,7 +464,7 @@ function populateInfo(i)
     }
   }
 	var vcn = "Kuuhaku";
-	if (i.ver.startsWith("0.11.")) vcn = "Mirai";
+	if (i.ver.startsWith("0.12.")) vcn = "Hikari";
 	if (i.cn) vcn = i.cn;
 	
 	cn += `v${i.ver} "${vcn}"<br><br><table class="infot">
@@ -473,7 +473,8 @@ function populateInfo(i)
 	${inforow("Signal strength",i.wifi.signal +"% ("+ i.wifi.rssi, " dBm)")}
 	${inforow("Uptime",getRuntimeStr(i.uptime))}
 	${inforow("Free heap",heap," kB")}
-	${inforow("Estimated current",pwru)}
+  ${inforow("Estimated current",pwru)}
+  ${inforow("Frames / second",i.leds.fps)}
 	${inforow("MAC address",i.mac)}
 	${inforow("Filesystem",i.fs.u + "/" + i.fs.t + " kB (" +Math.round(i.fs.u*100/i.fs.t) + "%)")}
 	${inforow("Environment",i.arch + " " + i.core + " (" + i.lwip + ")")}

wled00/data/liveviewws.htm

@@ -0,0 +1,62 @@
+<!DOCTYPE html>
+<html>
+<head>
+  <meta name="viewport" content="width=device-width, initial-scale=1, minimum-scale=1">
+  <meta charset="utf-8">
+  <meta name="theme-color" content="#222222">
+  <title>WLED Live Preview</title>
+  <style>
+  body {
+    margin: 0;
+  }
+  #canv {
+    background: black;
+    filter: brightness(175%);
+    width: 100%;
+    height: 100%;
+    position: absolute;
+  }
+  </style>
+</head>
+<body>
+  <div id="canv" />
+  <script>
+    console.info("Live-Preview websocket opening");
+    var socket = new WebSocket("ws://"+document.location.host+"/ws");
+
+    socket.onopen = function () {
+      console.info("Live-Preview websocket is opened");
+      socket.send("{'lv':true}");
+    }
+
+    socket.onclose = function () { console.info("Live-Preview websocket is closing"); }
+
+    socket.onerror = function (event) { console.error("Live-Preview websocket error:", event); }
+
+    function updatePreview(leds) {
+      var str = "linear-gradient(90deg,";
+      var len = leds.length;        
+      for (i = 0; i < len; i++) {
+        var leddata = leds[i];
+        if (leddata.length > 6) leddata = leddata.substring(2);
+        str += "#" + leddata;
+        if (i < len -1) str += ","
+      }
+      str += ")";
+      document.getElementById("canv").style.background = str;
+    }
+
+    socket.onmessage = function (event) {
+      try {
+        var json = JSON.parse(event.data);
+        if (json && json.leds) {
+          requestAnimationFrame(function () {updatePreview(json.leds);});
+        } 
+      }
+      catch (err) {
+        console.error("Live-Preview websocket error:",err);
+      }      
+    }
+  </script>
+</body>
+</html>

wled00/data/settings_leds.htm

@@ -5,7 +5,7 @@
 	<meta name="viewport" content="width=500">
 	<title>LED Settings</title>
 	<script>
-    var d=document,laprev=55;
+    var d=document,laprev=55,maxST=1,bmax=5000,bquot=0; //maximum bytes for LED allocation: 5kB for 8266, 32kB for 32
 		function H()
 		{
 			window.open("https://github.com/Aircoookie/WLED/wiki/Settings#led-settings");
@@ -13,8 +13,29 @@
 		function B()
 		{
 			window.open("/settings","_self");
-		}
+    }
-		function S(){GetV();setABL();}
+    function trySubmit() {
+      var LCs = d.getElementsByTagName("input");
+      for (i=0; i<LCs.length; i++) {
+        var nm = LCs[i].name.substring(0,2);
+
+        //check for pin conflicts
+        if (nm=="L0" || nm=="L1" || nm=="RL" || nm=="BT" || nm=="IR" || nm=="AX")
+          if (LCs[i].value!="" && LCs[i].value!="-1") {
+            if (LCs[i].value > 5 && LCs[i].value < 12) {alert("Sorry, pins 6-11 can not be used.");LCs[i].focus();return;}
+            if (d.um_p && d.um_p.some((e)=>e==parseInt(LCs[i].value,10))) {alert("Usermod pin conflict!");LCs[i].focus();return;}
+            for (j=i+1; j<LCs.length; j++)
+            {
+              var n2 = LCs[j].name.substring(0,2);
+              if (n2=="L0" || n2=="L1" || n2=="RL" || n2=="BT" || n2=="IR" || n2=="AX")
+                if (LCs[j].value!="" && LCs[i].value==LCs[j].value) {alert("Pin conflict!");LCs[i].focus();return;}
+            }
+          }
+      }
+      if (bquot > 100) {var msg = "Too many LEDs for me to handle!"; if (bmax < 10000) msg += " Consider using an ESP32."; alert(msg); return;}
+      if (d.Sf.reportValidity()) d.Sf.submit();
+    }
+		function S(){GetV();setABL(); if (maxST>4) bmax=64000; d.getElementById('m1').innerHTML = bmax;}
     function enABL()
     {
       var en = d.getElementById('able').checked;
@@ -43,22 +64,95 @@
         default: d.getElementById('LAdis').style.display = 'inline';
       }
       UI();
+    }
+    //returns mem usage
+    function getMem(type, len, p0) {
+      //len = parseInt(len);
+      if (type < 32) {
+        if (bmax < 10000 && p0 ==3) { //8266 DMA uses 5x the mem
+          if (type > 29) return len*20; //RGBW
+          return len*15;
+        } else if (bmax > 10000) //ESP32 RMT uses double buffer?
+        {
+          if (type > 29) return len*8; //RGBW
+          return len*6;
+        }
+        if (type > 29) return len*4; //RGBW
+        return len*3;
+      }
+      if (type > 31 && type < 48) return 5;
+      if (type == 44 || type == 45) return len*4; //RGBW
+      return len*3;
     }
 		function UI()
 		{
-			var myC = d.querySelectorAll('.wc'),
+      var isRGBW = false, memu = 0;
-			l = myC.length;
-			for (i = 0; i < l; i++) {
-				myC[i].style.display = (d.getElementById('rgbw').checked) ? 'inline':'none';
-			}
       
-      d.getElementById('ledwarning').style.display = (d.Sf.LC.value > 1000) ? 'inline':'none';
       d.getElementById('ampwarning').style.display = (d.Sf.MA.value > 7200) ? 'inline':'none';
 	  
-	  if (d.Sf.LA.value == 255) laprev = 12;
+	    if (d.Sf.LA.value == 255) laprev = 12;
-	  else if (d.Sf.LA.value > 0) laprev = d.Sf.LA.value;
+	    else if (d.Sf.LA.value > 0) laprev = d.Sf.LA.value;
       
-			var val = Math.ceil((100 + d.Sf.LC.value * laprev)/500)/2;
+      var s = d.getElementsByTagName("select");
+      for (i=0; i<s.length; i++) {
+        if (s[i].name.substring(0,2)=="LT") {
+          n=s[i].name.substring(2);
+          var type = s[i].value;
+          d.getElementById("p0d"+n).innerHTML = (type > 49) ? "Data pin:" : (type >41) ? "Pins:" : "Pin:";
+          d.getElementById("p1d"+n).innerHTML = (type > 49) ? "Clk:" : "";
+          var LK = d.getElementsByName("L1"+n)[0];
+
+          memu += getMem(type, d.getElementsByName("LC"+n)[0].value, d.getElementsByName("L0"+n)[0].value);
+
+          for (p=1; p<5; p++) {
+            var LK = d.getElementsByName("L"+p+n)[0];
+            if (!LK) continue;
+            if ((type>49 && p==1) || (type>41 && type < 50 && (p+40 < type))) // TYPE_xxxx values from const.h
+            {
+              LK.style.display = "inline";
+              LK.required = true;
+            } else {
+              LK.style.display = "none";
+              LK.required = false;
+              LK.value="";
+            }
+          }
+          if (type == 30 || type == 31 || type == 44 || type == 45) isRGBW = true;
+          d.getElementById("dig"+n).style.display = (type > 31 && type < 48) ? "none":"inline";
+          d.getElementById("psd"+n).innerHTML = (type > 31 && type < 48) ? "Index:":"Start:";
+        }
+      }
+
+      var myC = d.querySelectorAll('.wc'),
+			l = myC.length;
+			for (i = 0; i < l; i++) {
+				myC[i].style.display = (isRGBW) ? 'inline':'none';
+			}
+
+      if (d.activeElement == d.getElementsByName("LC")[0]) {
+        var o = d.getElementsByClassName("iST");
+        var i = o.length;
+        if (i == 1) d.getElementsByName("LC0")[0].value = d.getElementsByName("LC")[0].value;
+      }
+
+      var LCs = d.getElementsByTagName("input");
+      var sLC = 0, maxLC = 0;
+      for (i=0; i<LCs.length; i++) {
+        var nm = LCs[i].name.substring(0,2);
+        if (nm=="LC" && LCs[i].name != "LC") {var c = parseInt(LCs[i].value,10); if (c) {sLC+=c; if (c>maxLC) maxLC = c;} continue;}
+      }
+
+      d.getElementById('m0').innerHTML = memu;
+      bquot = memu / bmax * 100;
+      d.getElementById('dbar').style.background = `linear-gradient(90deg, ${bquot > 60 ? bquot > 90 ? "red":"orange":"#ccc"} 0 ${bquot}%%, #444 ${bquot}%% 100%%)`;
+      d.getElementById('ledwarning').style.display = (maxLC > 800 || bquot > 80) ? 'inline':'none';
+      //TODO add warning "Recommended pins on ESP8266 are 1 and 2 (3 only with low LED count)"
+      //TODO add overmemory warning
+      //TODO block disallowed pins 6-11
+      d.getElementById('wreason').innerHTML = (bquot > 80) ? "than 60%% of max. LED memory" : "800 LEDs per pin";
+
+      //var val = Math.ceil((100 + d.Sf.LC.value * laprev)/500)/2;
+      var val = Math.ceil((100 + sLC * laprev)/500)/2;
 			val = (val > 5) ? Math.ceil(val) : val;
 			var s = "";
       var is12V = (d.Sf.LAsel.value == 30);
@@ -72,18 +166,79 @@
 				s += val;
 				s += "A supply connected to LEDs";
 			}
-      var val2 = Math.ceil((100 + d.Sf.LC.value * laprev)/1500)/2;
+      var val2 = Math.ceil((100 + sLC * laprev)/1500)/2;
       val2 = (val2 > 5) ? Math.ceil(val2) : val2;
       var s2 = "(for most effects, ~";
       s2 += val2;
       s2 += "A is enough)<br>";
 			d.getElementById('psu').innerHTML = s;
       d.getElementById('psu2').innerHTML = isWS2815 ? "" : s2;
-		}
+    }
+    function addLEDs(n)
+    {
+      if (n>1) {maxST=n; d.getElementById("+").style.display="inline"; return;}
+
+      var o = d.getElementsByClassName("iST");
+      var i = o.length;
+
+      if ((n==1 && i>=maxST) || (n==-1 && i==0)) return;
+
+      var f = d.getElementById("mLC");
+      if (n==1) {
+        var cn = `<div class="iST">
+          ${i>0?'<hr style="width:260px">':''}
+          ${i+1}:
+          <select name="LT${i}" onchange="UI()">
+            <option value="22">WS281x</option>
+            <option value="30">SK6812 RGBW</option>
+            <option value="31">TM1814</option>
+            <option value="24">400kHz</option>
+            <option value="50">WS2801</option>
+            <option value="51">APA102</option>
+            <option value="52">LPD8806</option>
+            <option value="53">P9813</option>
+            <option value="41">PWM White</option>
+            <option value="42">PWM WWCW</option>
+            <option value="43">PWM RGB</option>
+            <option value="44">PWM RGBW</option>
+            <option value="45">PWM RGBWC</option>
+          </select>&nbsp;
+          Color Order:
+          <select name="CO${i}">
+            <option value="0">GRB</option>
+            <option value="1">RGB</option>
+            <option value="2">BRG</option>
+            <option value="3">RBG</option>
+            <option value="4">BGR</option>
+            <option value="5">GBR</option>
+          </select><br>
+          <span id="p0d${i}">Pin:</span> <input type="number" name="L0${i}" min="0" max="40" required style="width:35px" oninput="UI()"/>
+          <span id="p1d${i}">Clock:</span> <input type="number" name="L1${i}" min="0" max="40" style="width:35px"/>
+          <span id="p2d${i}"></span><input type="number" name="L2${i}" min="0" max="40" style="width:35px"/>
+          <span id="p3d${i}"></span><input type="number" name="L3${i}" min="0" max="40" style="width:35px"/>
+          <span id="p4d${i}"></span><input type="number" name="L4${i}" min="0" max="40" style="width:35px"/>
+          <br>
+          <span id="psd${i}">Start:</span> <input type="number" name="LS${i}" min="0" max="8191" value="0" required />&nbsp;
+          <div id="dig${i}" style="display:inline">
+          Count: <input type="number" name="LC${i}" min="0" max="2048" value="1" required oninput="UI()" /><br>
+          Reverse: <input type="checkbox" name="CV${i}"></div><br>
+        </div>`;
+        f.insertAdjacentHTML("beforeend", cn);
+      }
+      if (n==-1) {
+        o[--i].remove();--i;
+      }
+
+      d.getElementById("+").style.display = (i<maxST-1) ? "inline":"none";
+      d.getElementById("-").style.display = (i>0) ? "inline":"none";
+
+      UI();
+    }
 		function GetV()
 		{
-			//values injected by server while sending HTML
+      //values injected by server while sending HTML
-		}
+      //d.um_p=[];addLEDs(3);d.Sf.LC.value=250;addLEDs(1);d.Sf.L00.value=2;d.Sf.L10.value=0;d.Sf.LC0.value=250;d.Sf.LT0.value=22;d.Sf.CO0.value=0;d.Sf.LS0.value=0;d.Sf.LS0.checked=0;d.Sf.MA.value=5400;d.Sf.LA.value=55;d.getElementsByClassName("pow")[0].innerHTML="350mA";d.Sf.CA.value=40;d.Sf.AW.value=3;d.Sf.BO.checked=0;d.Sf.BP.value=3;d.Sf.GB.checked=0;d.Sf.GC.checked=1;d.Sf.TF.checked=1;d.Sf.TD.value=700;d.Sf.PF.checked=0;d.Sf.BF.value=64;d.Sf.TB.value=0;d.Sf.TL.value=60;d.Sf.TW.value=1;d.Sf.PB.selectedIndex=0;d.Sf.RV.checked=0;d.Sf.SL.checked=0;d.Sf.RL.value=12;d.Sf.RM.checked=0;d.Sf.BT.value=-1;d.Sf.IR.value=-1;d.Sf.AX.value=-1;
+    }
 	</script>
 	<style>
 		@import url("style.css");
@@ -92,62 +247,51 @@
 <body onload="S()">
 	<form id="form_s" name="Sf" method="post">
 		<div class="helpB"><button type="button" onclick="H()">?</button></div>
-		<button type="button" onclick="B()">Back</button><button type="submit">Save</button><hr>
+		<button type="button" onclick="B()">Back</button><button type="button" onclick="trySubmit()">Save</button><hr>
-		<h2>LED setup</h2>
+    <h2>LED &amp; Hardware setup</h2>
-		LED count: <input name="LC" type="number" min="1" max="1500" oninput="UI()" required><br>
+    Total LED count: <input name="LC" type="number" min="1" max="8192" oninput="UI()" required><br>
-    <div id="ledwarning" style="color: orange; display: none;">
+  <i>Recommended power supply for brightest white:</i><br>
-        &#9888; You might run into stability or lag issues.<br>
+  <b><span id="psu">?</span></b><br>
-        Use less than 1000 LEDs per ESP for the best experience!<br>
+  <span id="psu2"><br></span>
-      </div>
+  <br>
-		<i>Recommended power supply for brightest white:</i><br>
+  Enable automatic brightness limiter: <input type="checkbox" name="ABen" onchange="enABL()" id="able"><br>
-		<b><span id="psu">?</span></b><br>
+  <div id="abl">
-    <span id="psu2"><br></span>
+    Maximum Current: <input name="MA" type="number" min="250" max="65000" oninput="UI()" required> mA<br>
-    <br>
+    <div id="ampwarning" style="color: orange; display: none;">
-    Enable automatic brightness limiter: <input type="checkbox" name="ABen" onchange="enABL()" id="able"><br>
+      &#9888; Your power supply provides high current.<br>
-    <div id="abl">
+      To improve the safety of your setup,<br>
-      Maximum Current: <input name="MA" type="number" min="250" max="65000" oninput="UI()" required> mA<br>
+      please use thick cables,<br>
-      <div id="ampwarning" style="color: orange; display: none;">
+      multiple power injection points and a fuse!<br>
-        &#9888; Your power supply provides high current.<br>
-        To improve the safety of your setup,<br>
-        please use thick cables,<br>
-        multiple power injection points and a fuse!<br>
-      </div>
-      <i>Automatically limits brightness to stay close to the limit.<br>
-      Keep at &lt;1A if powering LEDs directly from the ESP 5V pin!<br>
-      If you are using an external power supply, enter its rating.<br>
-      (Current estimated usage: <span class="pow">unknown</span>)</i><br><br>
-      LED voltage (Max. current for a single LED):<br>
-      <select name="LAsel" onchange="enLA()">
-        <option value="55" selected>5V default (55mA)</option>
-        <option value="35">5V efficient (35mA)</option>
-        <option value="30">12V (30mA)</option>
-        <option value="255">WS2815 (12mA)</option>
-        <option value="50">Custom</option>
-      </select><br>
-      <span id="LAdis" style="display: none;">Custom max. current per LED: <input name="LA" type="number" min="0" max="255" id="la" oninput="UI()" required> mA<br></span>
-      <i>Keep at default if you are unsure about your type of LEDs.</i><br>
     </div>
-    <br>
+    <i>Automatically limits brightness to stay close to the limit.<br>
-		LEDs are 4-channel type (RGBW): <input type="checkbox" name="EW" onchange=UI() id="rgbw"><br>
+    Keep at &lt;1A if powering LEDs directly from the ESP 5V pin!<br>
-    <span class="wc">
+    If you are using an external power supply, enter its rating.<br>
-    Auto-calculate white channel from RGB:<br>
+    (Current estimated usage: <span class="pow">unknown</span>)</i><br><br>
-    <select name=AW>
+    LED voltage (Max. current for a single LED):<br>
-      <option value=0>None</option>
+    <select name="LAsel" onchange="enLA()">
-      <option value=1>Brighter</option>
+      <option value="55" selected>5V default (55mA)</option>
-      <option value=2>Accurate</option>
+      <option value="35">5V efficient (35mA)</option>
-      <option value=3>Dual</option>
+      <option value="30">12V (30mA)</option>
-      <option value=4>Legacy</option>
+      <option value="255">WS2815 (12mA)</option>
-    </select>
+      <option value="50">Custom</option>
-    <br></span>
+    </select><br>
-		Color order:
+    <span id="LAdis" style="display: none;">Custom max. current per LED: <input name="LA" type="number" min="0" max="255" id="la" oninput="UI()" required> mA<br></span>
-		<select name="CO">
+    <i>Keep at default if you are unsure about your type of LEDs.</i><br>
-			<option value=0>GRB</option>
+  </div>
-      <option value=1>RGB</option>
+    <h3>Hardware setup</h3>
-      <option value=2>BRG</option>
+    <div id="mLC">LED outputs:</div>
-      <option value=3>RBG</option>
+    <button type="button" id="+" onclick="addLEDs(1)" style="display:none;border-radius:20px;height:36px;">+</button>
-      <option value=4>BGR</option>
+    <button type="button" id="-" onclick="addLEDs(-1)" style="display:none;border-radius:20px;width:36px;height:36px;">-</button><br>
-      <option value=5>GBR</option>
+    LED Memory Usage: <span id="m0">0</span> / <span id="m1">?</span> B<br>
-		</select>
+    <div id="dbar" style="display:inline-block; width: 100px; height: 10px; border-radius: 20px;"></div><br>
+    <div id="ledwarning" style="color: orange; display: none;">
+      &#9888; You might run into stability or lag issues.<br>
+      Use less than <span id="wreason">800 LEDs per pin</span> for the best experience!<br>
+    </div><br>
+    Relay pin: <input type="number" min="-1" max="40" name="RL" onchange="UI()"> Active high <input type="checkbox" name="RM"><br>
+    Button pin: <input type="number" min="-1" max="40" name="BT" onchange="UI()"><br>
+    IR pin: <input type="number" min="-1" max="40" name="IR" onchange="UI()"><br>
+    AUX pin: <input type="number" min="-1" max="40" name="AX" onchange="UI()">
 		<h3>Defaults</h3>
 		Turn LEDs on after power up/reset: <input type="checkbox" name="BO"><br>
     Default brightness: <input name="CA" type="number" min="0" max="255" required> (0-255)<br><br>
@@ -171,7 +315,7 @@
 			<option value="2">Fade Color</option>
 			<option value="3">Sunrise</option>
 		</select>
-		<h3>Advanced</h3>
+    <h3>Advanced</h3>
 		Palette blending:
 		<select name="PB">
 			<option value="0">Linear (wrap if moving)</option>
@@ -180,8 +324,18 @@
 			<option value="3">None (not recommended)</option>
 		</select><br>
 		Reverse LED order (rotate 180): <input type="checkbox" name="RV"><br>
-		Skip first LED: <input type="checkbox" name="SL"><hr>
+    Skip first LED: <input type="checkbox" name="SL"><br>
-		<button type="button" onclick="B()">Back</button><button type="submit">Save</button>
+    <span class="wc">
+      Auto-calculate white channel from RGB:<br>
+      <select name="AW">
+        <option value=0>None</option>
+        <option value=1>Brighter</option>
+        <option value=2>Accurate</option>
+        <option value=3>Dual</option>
+        <option value=4>Legacy</option>
+      </select>
+    <br></span><hr>
+		<button type="button" onclick="B()">Back</button><button type="button" onclick="trySubmit()">Save</button>
 	</form>
 </body>
 </html>

wled00/fcn_declare.h

@@ -76,7 +76,6 @@ bool decodeIRCustom(uint32_t code);
 void applyRepeatActions();
 void relativeChange(byte* property, int8_t amount, byte lowerBoundary = 0, byte higherBoundary = 0xFF);
 void changeEffectSpeed(int8_t amount);
-void changeBrightness(int8_t amount);
 void changeEffectIntensity(int8_t amount);
 void decodeIR(uint32_t code);
 void decodeIR24(uint32_t code);
@@ -149,22 +148,6 @@ void setCronixie();
 void _overlayCronixie();    
 void _drawOverlayCronixie();
 
-//pin_manager.cpp
-class PinManagerClass {
-  private:
-  #ifdef ESP8266
-  uint8_t pinAlloc[3] = {0x00, 0x00, 0x00}; //24bit, 1 bit per pin, we use first 17bits
-  #else
-  uint8_t pinAlloc[5] = {0x00, 0x00, 0x00, 0x00, 0x00}; //40bit, 1 bit per pin, we use all bits
-  #endif
-
-  public:
-  void deallocatePin(byte gpio);
-  bool allocatePin(byte gpio, bool output = true);
-  bool isPinAllocated(byte gpio);
-  bool isPinOk(byte gpio, bool output = true);
-};
-
 //playlist.cpp
 void loadPlaylist(JsonObject playlistObject);
 void handlePlaylist();

wled00/html_other.h

@@ -42,7 +42,7 @@ function B(){window.history.back()}function U(){document.getElementById("uf").st
 .bt{background:#333;color:#fff;font-family:Verdana,sans-serif;border:.3ch solid #333;display:inline-block;font-size:20px;margin:8px;margin-top:12px}input[type=file]{font-size:16px}body{font-family:Verdana,sans-serif;text-align:center;background:#222;color:#fff;line-height:200%}#msg{display:none}
 </style></head><body><h2>WLED Software Update</h2><form method="POST" 
 action="/update" id="uf" enctype="multipart/form-data" onsubmit="U()">
-Installed version: 0.11.1<br>Download the latest binary: <a 
+Installed version: 0.12.0-a0<br>Download the latest binary: <a 
 href="https://github.com/Aircoookie/WLED/releases" target="_blank"><img 
 src="https://img.shields.io/github/release/Aircoookie/WLED.svg?style=flat-square">
 </a><br><input type="file" class="bt" name="update" accept=".bin" required><br>
@@ -78,6 +78,17 @@ update();var tmout=null;function update(){if(document.hidden)return clearTimeout
 </script></body></html>)=====";
 
 
+// Autogenerated from wled00/data/liveviewws.htm, do not edit!!
+const char PAGE_liveviewws[] PROGMEM = R"=====(<!DOCTYPE html><html><head><meta name="viewport" 
+content="width=device-width,initial-scale=1,minimum-scale=1"><meta 
+charset="utf-8"><meta name="theme-color" content="#222222"><title>
+WLED Live Preview</title><style>
+body{margin:0}#canv{background:#000;filter:brightness(175%);width:100%;height:100%;position:absolute}
+</style></head><body><div id="canv"><script>
+console.info("Live-Preview websocket opening");var socket=new WebSocket("ws://"+document.location.host+"/ws");function updatePreview(e){var o="linear-gradient(90deg,",n=e.length;for(i=0;i<n;i++){var t=e[i];t.length>6&&(t=t.substring(2)),o+="#"+t,i<n-1&&(o+=",")}o+=")",document.getElementById("canv").style.background=o}socket.onopen=function(){console.info("Live-Preview websocket is opened"),socket.send("{'lv':true}")},socket.onclose=function(){console.info("Live-Preview websocket is closing")},socket.onerror=function(e){console.error("Live-Preview websocket error:",e)},socket.onmessage=function(e){try{var o=JSON.parse(e.data);o&&o.leds&&requestAnimationFrame((function(){updatePreview(o.leds)}))}catch(e){console.error("Live-Preview websocket error:",e)}}
+</script></body></html>)=====";
+
+
 // Autogenerated from wled00/data/404.htm, do not edit!!
 const char PAGE_404[] PROGMEM = R"=====(<!DOCTYPE html><html><head><meta charset="utf-8"><meta 
 content="width=device-width" name="viewport"><meta name="theme-color" 

wled00/ir.cpp

@@ -21,6 +21,54 @@ uint16_t irTimesRepeated = 0;
 uint8_t lastIR6ColourIdx = 0;
 
 
+// brightnessSteps: a static array of brightness levels following a geometric
+// progression.  Can be generated from the following Python, adjusting the
+// arbitrary 4.5 value to taste:
+//
+// def values(level):
+//     while level >= 5:
+//         yield int(level)
+//         level -= level / 4.5
+// result = [v for v in reversed(list(values(255)))]
+// print("%d values: %s" % (len(result), result))
+//
+// It would be hard to maintain repeatable steps if calculating this on the fly.
+const byte brightnessSteps[] = {
+  5, 7, 9, 12, 16, 20, 26, 34, 43, 56, 72, 93, 119, 154, 198, 255
+};
+const size_t numBrightnessSteps = sizeof(brightnessSteps) / sizeof(uint8_t);
+
+// increment `bri` to the next `brightnessSteps` value
+void incBrightness()
+{
+  // dumb incremental search is efficient enough for so few items
+  for (int index = 0; index < numBrightnessSteps; ++index)
+  {
+    if (brightnessSteps[index] > bri)
+    {
+      bri = brightnessSteps[index];
+      lastRepeatableAction = ACTION_BRIGHT_UP;
+      break;
+    }
+  }
+}
+
+// decrement `bri` to the next `brightnessSteps` value
+void decBrightness()
+{
+  // dumb incremental search is efficient enough for so few items
+  for (int index = numBrightnessSteps - 1; index >= 0; --index)
+  {
+    if (brightnessSteps[index] < bri)
+    {
+      bri = brightnessSteps[index];
+      lastRepeatableAction = ACTION_BRIGHT_DOWN;
+      break;
+    }
+  }
+}
+
+
 //Add what your custom IR codes should trigger here. Guide: https://github.com/Aircoookie/WLED/wiki/Infrared-Control
 //IR codes themselves can be defined directly after "case" or in "ir_codes.h"
 bool decodeIRCustom(uint32_t code)
@@ -47,16 +95,6 @@ void relativeChange(byte* property, int8_t amount, byte lowerBoundary, byte high
   *property = (byte)constrain(new_val,0.1,255.1);
 }
 
-void changeBrightness(int8_t amount)
-{
-  int16_t new_val = bri + amount;
-  if (new_val < 5) new_val = 5; //minimum brightness A=5
-  bri = (byte)constrain(new_val,0.1,255.1);
-  if(amount > 0) lastRepeatableAction = ACTION_BRIGHT_UP;
-  if(amount < 0) lastRepeatableAction = ACTION_BRIGHT_DOWN;
-  lastRepeatableValue = amount;
-}
-
 void changeEffectSpeed(int8_t amount)
 {
   if (effectCurrent != 0) {
@@ -142,11 +180,11 @@ void applyRepeatActions(){
   
     if (lastRepeatableAction == ACTION_BRIGHT_UP)
     { 
-      changeBrightness(lastRepeatableValue); colorUpdated(NOTIFIER_CALL_MODE_BUTTON);
+      incBrightness(); colorUpdated(NOTIFIER_CALL_MODE_BUTTON);
     }
     else if (lastRepeatableAction == ACTION_BRIGHT_DOWN )
     {
-      changeBrightness(lastRepeatableValue); colorUpdated(NOTIFIER_CALL_MODE_BUTTON);
+      decBrightness(); colorUpdated(NOTIFIER_CALL_MODE_BUTTON);
     }
 
     if (lastRepeatableAction == ACTION_SPEED_UP)
@@ -187,8 +225,8 @@ void applyRepeatActions(){
 void decodeIR24(uint32_t code)
 {
   switch (code) {
-    case IR24_BRIGHTER  : changeBrightness(10);             break;
+    case IR24_BRIGHTER  : incBrightness();                  break;
-    case IR24_DARKER    : changeBrightness(-10);            break;
+    case IR24_DARKER    : decBrightness();                  break;
     case IR24_OFF       : briLast = bri; bri = 0;           break;
     case IR24_ON        : bri = briLast;                    break;
     case IR24_RED       : colorFromUint32(COLOR_RED);       break;
@@ -219,8 +257,8 @@ void decodeIR24(uint32_t code)
 void decodeIR24OLD(uint32_t code)
 {
   switch (code) {
-    case IR24_OLD_BRIGHTER  : changeBrightness(10);                break;
+    case IR24_OLD_BRIGHTER  : incBrightness();                     break;
-    case IR24_OLD_DARKER    : changeBrightness(-10);               break;
+    case IR24_OLD_DARKER    : decBrightness();                     break;
     case IR24_OLD_OFF       : briLast = bri; bri = 0;              break;
     case IR24_OLD_ON        : bri = briLast;                       break;
     case IR24_OLD_RED       : colorFromUint32(COLOR_RED);          break;
@@ -252,8 +290,8 @@ void decodeIR24OLD(uint32_t code)
 void decodeIR24CT(uint32_t code)
 {
   switch (code) {
-    case IR24_CT_BRIGHTER   : changeBrightness(10);                break;
+    case IR24_CT_BRIGHTER   : incBrightness();                     break;
-    case IR24_CT_DARKER     : changeBrightness(-10);               break;
+    case IR24_CT_DARKER     : decBrightness();                     break;
     case IR24_CT_OFF        : briLast = bri; bri = 0;              break;
     case IR24_CT_ON         : bri = briLast;                       break;
     case IR24_CT_RED        : colorFromUint32(COLOR_RED);          break;
@@ -287,8 +325,8 @@ void decodeIR24CT(uint32_t code)
 void decodeIR40(uint32_t code)
 {
   switch (code) {
-    case IR40_BPLUS        : changeBrightness(10);                                       break;
+    case IR40_BPLUS        : incBrightness();                                            break;
-    case IR40_BMINUS       : changeBrightness(-10);                                      break;
+    case IR40_BMINUS       : decBrightness();                                            break;
     case IR40_OFF          : briLast = bri; bri = 0;                                     break;
     case IR40_ON           : bri = briLast;                                              break;
     case IR40_RED          : colorFromUint24(COLOR_RED);                                 break;
@@ -344,8 +382,8 @@ void decodeIR40(uint32_t code)
 void decodeIR44(uint32_t code)
 {
   switch (code) {
-    case IR44_BPLUS       : changeBrightness(10);                                       break;
+    case IR44_BPLUS       : incBrightness();                                            break;
-    case IR44_BMINUS      : changeBrightness(-10);                                      break;
+    case IR44_BMINUS      : decBrightness();                                            break;
     case IR44_OFF         : briLast = bri; bri = 0;                                     break;
     case IR44_ON          : bri = briLast;                                              break;
     case IR44_RED         : colorFromUint24(COLOR_RED);                                 break;
@@ -407,8 +445,8 @@ void decodeIR44(uint32_t code)
 void decodeIR21(uint32_t code)
 {
     switch (code) {
-    case IR21_BRIGHTER:  changeBrightness(10);             break;
+    case IR21_BRIGHTER:  incBrightness();                  break;
-    case IR21_DARKER:    changeBrightness(-10);            break;
+    case IR21_DARKER:    decBrightness();                  break;
     case IR21_OFF:       briLast = bri; bri = 0;           break;
     case IR21_ON:        bri = briLast;                    break;
     case IR21_RED:       colorFromUint32(COLOR_RED);       break;
@@ -437,8 +475,8 @@ void decodeIR6(uint32_t code)
 {
   switch (code) {
     case IR6_POWER: toggleOnOff();                                          break;
-    case IR6_CHANNEL_UP: changeBrightness(10);                              break;
+    case IR6_CHANNEL_UP: incBrightness();                                   break;
-    case IR6_CHANNEL_DOWN: changeBrightness(-10);                           break;
+    case IR6_CHANNEL_DOWN: decBrightness();                                 break;
     case IR6_VOLUME_UP:   relativeChange(&effectCurrent, 1, 0, MODE_COUNT); break;  // next effect
     case IR6_VOLUME_DOWN:                                                           // next palette
       relativeChange(&effectPalette, 1, 0, strip.getPaletteCount() -1); 
@@ -472,8 +510,8 @@ void decodeIR9(uint32_t code)
     case IR9_A          : if (!applyPreset(1)) effectCurrent = FX_MODE_COLORTWINKLE;  break;
     case IR9_B          : if (!applyPreset(2)) effectCurrent = FX_MODE_RAINBOW_CYCLE; break;
     case IR9_C          : if (!applyPreset(3)) effectCurrent = FX_MODE_BREATH;        break;
-    case IR9_UP         : changeBrightness(16);                                       break;
+    case IR9_UP         : incBrightness();                                            break;
-    case IR9_DOWN       : changeBrightness(-16);                                      break;
+    case IR9_DOWN       : decBrightness();                                            break;
     //case IR9_UP         : changeEffectIntensity(16);         break;
     //case IR9_DOWN       : changeEffectIntensity(-16);     break;
     case IR9_LEFT       : changeEffectSpeed(-16);                                     break;
@@ -488,7 +526,7 @@ void initIR()
 {
   if (irEnabled > 0)
   {
-    irrecv = new IRrecv(IRPIN);
+    irrecv = new IRrecv(irPin);
     irrecv->enableIRIn();
   }
 }

wled00/json.cpp

@@ -343,7 +343,6 @@ void serializeState(JsonObject root, bool forPreset, bool includeBri, bool segme
     if (errorFlag) root[F("error")] = errorFlag;
     
     root[F("ps")] = currentPreset;
-    root[F("pss")] = savedPresets;
     root[F("pl")] = (presetCyclingEnabled) ? 0: -1;
     
     usermods.addToJsonState(root);
@@ -424,6 +423,7 @@ void serializeInfo(JsonObject root)
   leds_pin.add(LEDPIN);
   
   leds[F("pwr")] = strip.currentMilliamps;
+  leds[F("fps")] = strip.getFps();
   leds[F("maxpwr")] = (strip.currentMilliamps)? strip.ablMilliampsMax : 0;
   leds[F("maxseg")] = strip.getMaxSegments();
   leds[F("seglock")] = false; //will be used in the future to prevent modifications to segment config
@@ -588,7 +588,7 @@ void serveJson(AsyncWebServerRequest* request)
 
 bool serveLiveLeds(AsyncWebServerRequest* request, uint32_t wsClient)
 {
-  AsyncWebSocketClient * wsc;
+  AsyncWebSocketClient * wsc = nullptr;
   if (!request) { //not HTTP, use Websockets
     #ifdef WLED_ENABLE_WEBSOCKETS
     wsc = ws.client(wsClient);
@@ -605,7 +605,7 @@ bool serveLiveLeds(AsyncWebServerRequest* request, uint32_t wsClient)
 
   for (uint16_t i= 0; i < used; i += n)
   {
-    olen += sprintf(obuf + olen, "\"%06X\",", strip.getPixelColor(i));
+    olen += sprintf(obuf + olen, "\"%06X\",", strip.getPixelColor(i) & 0xFFFFFF);
   }
   olen -= 1;
   oappend((const char*)F("],\"n\":"));

wled00/mqtt.cpp

@@ -110,7 +110,7 @@ void publishMqtt()
   char s[10];
   char subuf[38];
 
-  sprintf(s, "%ld", bri);
+  sprintf(s, "%u", bri);
   strcpy(subuf, mqttDeviceTopic);
   strcat(subuf, "/g");
   mqtt->publish(subuf, 0, true, s);

wled00/pin_manager.cpp

@@ -1,9 +1,6 @@
+#include "pin_manager.h"
 #include "wled.h"
 
-/*
- * Registers pins so there is no attempt for two interfaces to use the same pin
- */
-
 void PinManagerClass::deallocatePin(byte gpio)
 {
   if (!isPinOk(gpio, false)) return;
@@ -52,3 +49,43 @@ bool PinManagerClass::isPinOk(byte gpio, bool output)
   
   return false;
 }
+
+#ifdef ARDUINO_ARCH_ESP32
+byte PinManagerClass::allocateLedc(byte channels)
+{
+  if (channels > 16 || channels == 0) return 255;
+  byte ca = 0;
+  for (byte i = 0; i < 16; i++) {
+    byte by = i >> 3;
+    byte bi = i - 8*by;
+    if (bitRead(ledcAlloc[by], bi)) { //found occupied pin
+      ca = 0;
+    } else {
+      ca++;
+    }
+    if (ca >= channels) { //enough free channels
+      byte in = (i + 1) - ca;
+      for (byte j = 0; j < ca; j++) {
+        byte b = in + j;
+        byte by = b >> 3;
+        byte bi = b - 8*by;
+        bitWrite(ledcAlloc[by], bi, true);
+      }
+      return in;
+    }
+  }
+  return 255; //not enough consecutive free LEDC channels
+}
+
+void PinManagerClass::deallocateLedc(byte pos, byte channels)
+{
+  for (byte j = pos; j < pos + channels; j++) {
+    if (j > 16) return;
+    byte by = j >> 3;
+    byte bi = j - 8*by;
+    bitWrite(ledcAlloc[by], bi, false);
+  }
+}
+#endif
+
+PinManagerClass pinManager = PinManagerClass();

wled00/pin_manager.h

@@ -0,0 +1,29 @@
+#ifndef WLED_PIN_MANAGER_H
+#define WLED_PIN_MANAGER_H
+/*
+ * Registers pins so there is no attempt for two interfaces to use the same pin
+ */
+#include <Arduino.h>
+
+class PinManagerClass {
+  private:
+  #ifdef ESP8266
+  uint8_t pinAlloc[3] = {0x00, 0x00, 0x00}; //24bit, 1 bit per pin, we use first 17bits
+  #else
+  uint8_t pinAlloc[5] = {0x00, 0x00, 0x00, 0x00, 0x00}; //40bit, 1 bit per pin, we use all bits
+  uint8_t ledcAlloc[2] = {0x00, 0x00}; //16 LEDC channels
+  #endif
+
+  public:
+  void deallocatePin(byte gpio);
+  bool allocatePin(byte gpio, bool output = true);
+  bool isPinAllocated(byte gpio);
+  bool isPinOk(byte gpio, bool output = true);
+  #ifdef ARDUINO_ARCH_ESP32
+  byte allocateLedc(byte channels);
+  void deallocateLedc(byte pos, byte channels);
+  #endif
+};
+
+extern PinManagerClass pinManager;
+#endif

wled00/set.cpp

@@ -75,18 +75,90 @@ void handleSettingsSet(AsyncWebServerRequest *request, byte subPage)
   //LED SETTINGS
   if (subPage == 2)
   {
-    int t = request->arg(F("LC")).toInt();
+    int t = 0;
+
+    if (rlyPin>=0 && pinManager.isPinAllocated(rlyPin)) pinManager.deallocatePin(rlyPin);
+    #ifndef WLED_DISABLE_INFRARED
+    if (irPin>=0 && pinManager.isPinAllocated(irPin)) pinManager.deallocatePin(irPin);
+    #endif
+    if (btnPin>=0 && pinManager.isPinAllocated(btnPin)) pinManager.deallocatePin(btnPin);
+    //TODO remove all busses, but not in this system call
+    //busses->removeAll();
+
+    uint8_t colorOrder, type;
+    uint16_t length, start;
+    uint8_t pins[2] = {255, 255};
+
+    for (uint8_t s = 0; s < WLED_MAX_BUSSES; s++) {
+      char lp[4] = "L0"; lp[2] = 48+s; lp[3] = 0; //ascii 0-9 //strip data pin
+      char lk[4] = "L1"; lk[2] = 48+s; lk[3] = 0; //strip clock pin. 255 for none
+      char lc[4] = "LC"; lc[2] = 48+s; lc[3] = 0; //strip length
+      char co[4] = "CO"; co[2] = 48+s; co[3] = 0; //strip color order
+      char lt[4] = "LT"; lt[2] = 48+s; lt[3] = 0; //strip type
+      char ls[4] = "LS"; ls[2] = 48+s; ls[3] = 0; //strip start LED
+      char cv[4] = "CV"; cv[2] = 48+s; cv[3] = 0; //strip reverse
+      if (!request->hasArg(lp)) {
+        DEBUG_PRINTLN("No data."); break;
+      }
+      pins[0] = request->arg(lp).toInt();
+      if (request->hasArg(lk)) {
+        pins[1] = (request->arg(lk).length() > 0) ? request->arg(lk).toInt() : 255;
+      }
+      type = request->arg(lt).toInt();
+      
+      if (request->hasArg(lc) && request->arg(lc).toInt() > 0) {
+        length = request->arg(lc).toInt();
+      } else {
+        break;  // no parameter
+      }
+      colorOrder = request->arg(co).toInt();
+      start = (request->hasArg(ls)) ? request->arg(ls).toInt() : 0;
+
+      if (busConfigs[s] != nullptr) delete busConfigs[s];
+      busConfigs[s] = new BusConfig(type, pins, start, length, colorOrder, request->hasArg(cv));
+    }
+
+    ledCount = request->arg(F("LC")).toInt();
     if (t > 0 && t <= MAX_LEDS) ledCount = t;
-    #ifdef ESP8266
+    //DMA method uses too much ram, TODO: limit!
-    #if LEDPIN == 3
+
-    if (ledCount > MAX_LEDS_DMA) ledCount = MAX_LEDS_DMA; //DMA method uses too much ram
+    // upate other pins
-    #endif
+    #ifndef WLED_DISABLE_INFRARED
+    int hw_ir_pin = request->arg(F("IR")).toInt();
+    if (pinManager.isPinOk(hw_ir_pin) && pinManager.allocatePin(hw_ir_pin,false)) {
+      irPin = hw_ir_pin;
+    } else {
+      irPin = -1;
+    }
     #endif
+
+    int hw_rly_pin = request->arg(F("RL")).toInt();
+    if (pinManager.allocatePin(hw_rly_pin,true)) {
+      rlyPin = hw_rly_pin;
+    } else {
+      rlyPin = -1;
+    }
+    rlyMde = (bool)request->hasArg(F("RM"));
+
+    int hw_btn_pin = request->arg(F("BT")).toInt();
+    if (pinManager.allocatePin(hw_btn_pin,false)) {
+      btnPin = hw_btn_pin;
+      pinMode(btnPin, INPUT_PULLUP);
+    } else {
+      btnPin = -1;
+    }
+
+    int hw_aux_pin = request->arg(F("AX")).toInt();
+    if (pinManager.allocatePin(hw_aux_pin,true)) {
+      auxPin = hw_aux_pin;
+    } else {
+      auxPin = -1;
+    }
+
     strip.ablMilliampsMax = request->arg(F("MA")).toInt();
     strip.milliampsPerLed = request->arg(F("LA")).toInt();
     
     useRGBW = request->hasArg(F("EW"));
-    strip.setColorOrder(request->arg(F("CO")).toInt());
     strip.rgbwMode = request->arg(F("AW")).toInt();
 
     briS = request->arg(F("CA")).toInt();
@@ -328,12 +400,9 @@ void handleSettingsSet(AsyncWebServerRequest *request, byte subPage)
       DMXFixtureMap[i] = t;
     }
   }
-  
   #endif
-  if (subPage != 6 || !doReboot) serializeConfig(); //do not save if factory reset
+
-  if (subPage == 2) {
+  if (subPage != 2 && (subPage != 6 || !doReboot)) serializeConfig(); //do not save if factory reset or LED settings (which are saved after LED re-init)
-    strip.init(useRGBW,ledCount,skipFirstLed);
-  }
   if (subPage == 4) alexaInit();
 }
 
@@ -646,15 +715,15 @@ bool handleSet(AsyncWebServerRequest *request, const String& req, bool apply)
   }
   if (nightlightMode > NL_MODE_SUN) nightlightMode = NL_MODE_SUN;
 
-  #if AUXPIN >= 0
   //toggle general purpose output
-  pos = req.indexOf(F("AX="));
+  if (auxPin>=0) {
-  if (pos > 0) {
+    pos = req.indexOf(F("AX="));
-    auxTime = getNumVal(&req, pos);
+    if (pos > 0) {
-    auxActive = true;
+      auxTime = getNumVal(&req, pos);
-    if (auxTime == 0) auxActive = false;
+      auxActive = true;
+      if (auxTime == 0) auxActive = false;
+    }
   }
-  #endif
 
   pos = req.indexOf(F("TT="));
   if (pos > 0) transitionDelay = getNumVal(&req, pos);

wled00/udp.cpp

@@ -315,6 +315,15 @@ void handleNotifications()
         setRealtimePixel(id, udpIn[i], udpIn[i+1], udpIn[i+2], 0);
         id++;
       }
+    } else if (udpIn[0] == 5) //dnrgbw
+    {
+      uint16_t id = ((udpIn[3] << 0) & 0xFF) + ((udpIn[2] << 8) & 0xFF00);
+      for (uint16_t i = 4; i < packetSize -2; i += 4)
+      {
+          if (id >= ledCount) break;
+        setRealtimePixel(id, udpIn[i], udpIn[i+1], udpIn[i+2], udpIn[i+3]);
+        id++;
+      }
     }
     strip.show();
     return;

wled00/usermods_list.cpp

@@ -13,7 +13,9 @@
 #ifdef USERMOD_DALLASTEMPERATURE
 #include "../usermods/Temperature/usermod_temperature.h"
 #endif
+
 //#include "usermod_v2_empty.h"
+
 #ifdef USERMOD_BUZZER
 #include "../usermods/buzzer/usermod_v2_buzzer.h"
 #endif
@@ -24,6 +26,11 @@
 #ifdef USERMOD_MODE_SORT
 #include "../usermods/usermod_v2_mode_sort/usermod_v2_mode_sort.h"
 #endif
+
+// BME280 v2 usermod. Define "USERMOD_BME280" in my_config.h
+#ifdef USERMOD_BME280
+#include "../usermods/BME280_v2/usermod_bme280.h"
+#endif
 #ifdef USERMOD_FOUR_LINE_DISLAY
 #include "../usermods/usermod_v2_four_line_display/usermod_v2_four_line_display.h"
 #endif
@@ -45,14 +52,21 @@ void registerUsermods()
    * || || ||
    * \/ \/ \/
    */
-//usermods.add(new MyExampleUsermod());
+  //usermods.add(new MyExampleUsermod());
-#ifdef USERMOD_DALLASTEMPERATURE
+  
+  #ifdef USERMOD_DALLASTEMPERATURE
   usermods.add(new UsermodTemperature());
-#endif
+  #endif
-//usermods.add(new UsermodRenameMe());
+  
-#ifdef USERMOD_BUZZER
+  //usermods.add(new UsermodRenameMe());
+  
+  #ifdef USERMOD_BUZZER
   usermods.add(new BuzzerUsermod());
-#endif
+  #endif
+  
+  #ifdef USERMOD_BME280
+  usermods.add(new UsermodBME280());
+  #endif
 #ifdef USERMOD_SENSORSTOMQTT
   usermods.add(new UserMod_SensorsToMQTT());
 #endif

wled00/wled.cpp

@@ -205,10 +205,18 @@ void WLED::loop()
     handleHue();
     handleBlynk();
 
-    /*if (presetToApply) {
+    //LED settings have been saved, re-init busses
-      applyPreset(presetToApply);
+    if (busConfigs[0] != nullptr) {
-      presetToApply = 0;
+      busses.removeAll();
-    }*/
+      for (uint8_t i = 0; i < WLED_MAX_BUSSES; i++) {
+        if (busConfigs[i] == nullptr) break;
+        busses.add(*busConfigs[i]);
+        delete busConfigs[i]; busConfigs[i] = nullptr;
+      }
+      strip.finalizeInit(useRGBW, ledCount, skipFirstLed);
+      yield();
+      serializeConfig();
+    }
 
     yield();
 
@@ -277,13 +285,10 @@ void WLED::setup()
   DEBUG_PRINTLN(ESP.getFreeHeap());
   registerUsermods();
 
-  //strip.init(EEPROM.read(372), ledCount, EEPROM.read(2204));        // init LEDs quickly
-  //strip.setBrightness(0);
 
   //DEBUG_PRINT(F("LEDs inited. heap usage ~"));
   //DEBUG_PRINTLN(heapPreAlloc - ESP.getFreeHeap());
 
-
   bool fsinit = false;
   DEBUGFS_PRINTLN(F("Mount FS"));
 #ifdef ARDUINO_ARCH_ESP32
@@ -298,8 +303,16 @@ void WLED::setup()
   updateFSInfo();
   deserializeConfig();
 
-#if STATUSLED && STATUSLED != LEDPIN
+#if STATUSLED
-  pinMode(STATUSLED, OUTPUT);
+  bool lStatusLed = false;
+  for (uint8_t i=0; i<strip.numStrips; i++) {
+    if (strip.getStripPin(i)==STATUSLED) {
+      lStatusLed = true;
+      break;
+    }
+  }
+  if (!lStatusLed)
+    pinMode(STATUSLED, OUTPUT);
 #endif
 
   //DEBUG_PRINTLN(F("Load EEPROM"));
@@ -312,7 +325,8 @@ void WLED::setup()
   WiFi.persistent(false);
   WiFi.onEvent(WiFiEvent);
 
-  Serial.println(F("Ada"));
+  // Serial.println(F("Ada"));
+  DEBUG_PRINTLN(F("Ada"));
 
   // generate module IDs
   escapedMac = WiFi.macAddress();
@@ -356,25 +370,14 @@ void WLED::setup()
 void WLED::beginStrip()
 {
   // Initialize NeoPixel Strip and button
-  #ifdef ESP8266
-  #if LEDPIN == 3
-    if (ledCount > MAX_LEDS_DMA)
-      ledCount = MAX_LEDS_DMA;        // DMA method uses too much ram
-  #endif
-  #endif
 
   if (ledCount > MAX_LEDS || ledCount == 0)
     ledCount = 30;
 
-  strip.init(useRGBW, ledCount, skipFirstLed);
+  strip.finalizeInit(useRGBW, ledCount, skipFirstLed);
   strip.setBrightness(0);
   strip.setShowCallback(handleOverlayDraw);
 
-#if defined(BTNPIN) && BTNPIN > -1
-  pinManager.allocatePin(BTNPIN, false);
-  pinMode(BTNPIN, INPUT_PULLUP);
-#endif
-
   if (bootPreset > 0) applyPreset(bootPreset);
   if (turnOnAtBoot) {
     if (briS > 0) bri = briS;
@@ -384,24 +387,13 @@ void WLED::beginStrip()
   }
   colorUpdated(NOTIFIER_CALL_MODE_INIT);
 
-// init relay pin
+  // init relay pin
-#if RLYPIN >= 0
+  if (rlyPin>=0)
-  pinManager.allocatePin(RLYPIN);
+    digitalWrite(rlyPin, (rlyMde ? bri : !bri));
-  pinMode(RLYPIN, OUTPUT);
-#if RLYMDE
-  digitalWrite(RLYPIN, bri);
-#else
-  digitalWrite(RLYPIN, !bri);
-#endif
-#endif
 
   // disable button if it is "pressed" unintentionally
-#if (defined(BTNPIN) && BTNPIN > -1) || defined(TOUCHPIN)
+  if (btnPin>=0 && isButtonPressed())
-  if (isButtonPressed())
     buttonEnabled = false;
-#else
-  buttonEnabled = false;
-#endif
 }
 
 void WLED::initAP(bool resetAP)
@@ -647,7 +639,13 @@ void WLED::handleConnection()
 
 void WLED::handleStatusLED()
 {
-  #if STATUSLED && STATUSLED != LEDPIN
+  #if STATUSLED
+  for (uint8_t s=0; s<strip.numStrips; s++) {
+    if (strip.getStripPin(s)==STATUSLED) {
+      return; // pin used for strip
+    }
+  }
+
   ledStatusType = WLED_CONNECTED ? 0 : 2;
   if (mqttEnabled && ledStatusType != 2) // Wi-Fi takes presendence over MQTT
     ledStatusType = WLED_MQTT_CONNECTED ? 0 : 4;

wled00/wled.h

@@ -3,12 +3,12 @@
 /*
    Main sketch, global variable declarations
    @title WLED project sketch
-   @version 0.11.1
+   @version 0.12.0-a0
    @author Christian Schwinne
  */
 
 // version code in format yymmddb (b = daily build)
-#define VERSION 2101130
+#define VERSION 2102050
 
 //uncomment this if you have a "my_config.h" file you'd like to use
 //#define WLED_USE_MY_CONFIG
@@ -115,6 +115,8 @@
 #include "FX.h"
 #include "ir_codes.h"
 #include "const.h"
+#include "pin_manager.h"
+#include "bus_manager.h"
 
 #ifndef CLIENT_SSID
   #define CLIENT_SSID DEFAULT_CLIENT_SSID
@@ -130,7 +132,7 @@
   Comment out this error message to build regardless.
 #endif
 
-#if IRPIN < 0
+#if !defined(IRPIN) || IRPIN < 0
   #ifndef WLED_DISABLE_INFRARED
     #define WLED_DISABLE_INFRARED
   #endif
@@ -174,8 +176,8 @@
 #endif
 
 // Global Variable definitions
-WLED_GLOBAL char versionString[] _INIT("0.11.1");
+WLED_GLOBAL char versionString[] _INIT("0.12.0-a0");
-#define WLED_CODENAME "Mirai"
+#define WLED_CODENAME "Hikari"
 
 // AP and OTA default passwords (for maximum security change them!)
 WLED_GLOBAL char apPass[65]  _INIT(DEFAULT_AP_PASS);
@@ -183,13 +185,29 @@ WLED_GLOBAL char otaPass[33] _INIT(DEFAULT_OTA_PASS);
 
 // Hardware CONFIG (only changeble HERE, not at runtime)
 // LED strip pin, button pin and IR pin changeable in NpbWrapper.h!
+#ifndef BTNPIN
+WLED_GLOBAL int8_t btnPin _INIT(-1);
+#else
+WLED_GLOBAL int8_t btnPin _INIT(BTNPIN);
+#endif
+#ifndef RLYPIN
+WLED_GLOBAL int8_t rlyPin _INIT(-1);
+#else
+WLED_GLOBAL int8_t rlyPin _INIT(RLYPIN);
+#endif
+#ifndef RLYMDE
+WLED_GLOBAL bool rlyMde _INIT(1);
+#else
+WLED_GLOBAL bool rlyMde _INIT(RLYMDE);
+#endif
+#ifndef IRPIN
+WLED_GLOBAL int8_t irPin _INIT(-1);
+#else
+WLED_GLOBAL int8_t irPin _INIT(IRPIN);
+#endif
 
 //WLED_GLOBAL byte presetToApply _INIT(0); 
 
-#if AUXPIN >= 0
-WLED_GLOBAL byte auxDefaultState _INIT(0);                         // 0: input 1: high 2: low
-WLED_GLOBAL byte auxTriggeredState _INIT(0);                       // 0: input 1: high 2: low
-#endif
 WLED_GLOBAL char ntpServerName[33] _INIT("0.wled.pool.ntp.org");   // NTP server to use
 
 // WiFi CONFIG (all these can be changed via web UI, no need to set them here)
@@ -466,12 +484,18 @@ WLED_GLOBAL long lastInterfaceUpdate _INIT(0);
 WLED_GLOBAL byte interfaceUpdateCallMode _INIT(NOTIFIER_CALL_MODE_INIT);
 WLED_GLOBAL char mqttStatusTopic[40] _INIT("");        // this must be global because of async handlers
 
-#if AUXPIN >= 0
+// auxiliary debug pin
-  // auxiliary debug pin
+#ifndef AUXPIN
-  WLED_GLOBAL byte auxTime _INIT(0);
+WLED_GLOBAL int8_t auxPin _INIT(-1);
-  WLED_GLOBAL unsigned long auxStartTime _INIT(0);
+#else
-  WLED_GLOBAL bool auxActive _INIT(false, auxActiveBefore _INIT(false);
+WLED_GLOBAL int8_t auxPin _INIT(AUXPIN);
 #endif
+WLED_GLOBAL byte auxTime _INIT(0);
+WLED_GLOBAL unsigned long auxStartTime _INIT(0);
+WLED_GLOBAL bool auxActive _INIT(false);
+WLED_GLOBAL bool auxActiveBefore _INIT(false);
+WLED_GLOBAL byte auxDefaultState _INIT(0);                         // 0: input 1: high 2: low
+WLED_GLOBAL byte auxTriggeredState _INIT(0);                       // 0: input 1: high 2: low
 
 // alexa udp
 WLED_GLOBAL String escapedMac;
@@ -504,7 +528,6 @@ WLED_GLOBAL JsonDocument* fileDoc;
 WLED_GLOBAL bool doCloseFile _INIT(false);
 
 // presets
-WLED_GLOBAL uint16_t savedPresets _INIT(0);
 WLED_GLOBAL int16_t currentPreset _INIT(-1);
 WLED_GLOBAL bool isPreset _INIT(false);
 
@@ -531,15 +554,15 @@ WLED_GLOBAL ESPAsyncE131 e131 _INIT_N(((handleE131Packet)));
 WLED_GLOBAL bool e131NewData _INIT(false);
 
 // led fx library object
+WLED_GLOBAL BusManager busses _INIT(BusManager());
 WLED_GLOBAL WS2812FX strip _INIT(WS2812FX());
+WLED_GLOBAL BusConfig* busConfigs[WLED_MAX_BUSSES]; //temporary, to remember values from network callback until after 
 
 // Usermod manager
 WLED_GLOBAL UsermodManager usermods _INIT(UsermodManager());
 
-WLED_GLOBAL PinManagerClass pinManager _INIT(PinManagerClass());
-
 // Status LED
-#if STATUSLED && STATUSLED != LEDPIN
+#if STATUSLED
   WLED_GLOBAL unsigned long ledStatusLastMillis _INIT(0);
   WLED_GLOBAL unsigned short ledStatusType _INIT(0); // current status type - corresponds to number of blinks per second
   WLED_GLOBAL bool ledStatusState _INIT(0); // the current LED state

wled00/wled_server.cpp

@@ -39,9 +39,15 @@ void initServer()
   DefaultHeaders::Instance().addHeader(F("Access-Control-Allow-Methods"), "*");
   DefaultHeaders::Instance().addHeader(F("Access-Control-Allow-Headers"), "*");
 
-  server.on("/liveview", HTTP_GET, [](AsyncWebServerRequest *request){
+ #ifdef WLED_ENABLE_WEBSOCKETS
-    request->send_P(200, "text/html", PAGE_liveview);
+    server.on("/liveview", HTTP_GET, [](AsyncWebServerRequest *request){
-  });
+      request->send_P(200, "text/html", PAGE_liveviewws);
+    });
+ #else
+    server.on("/liveview", HTTP_GET, [](AsyncWebServerRequest *request){
+      request->send_P(200, "text/html", PAGE_liveview);
+    });
+  #endif
   
   //settings page
   server.on("/settings", HTTP_GET, [](AsyncWebServerRequest *request){

wled00/xml.cpp

@@ -254,14 +254,60 @@ void getSettingsJS(byte subPage, char* dest)
   }
 
   if (subPage == 2) {
-    #ifdef ESP8266
+    char nS[3];
-    #if LEDPIN == 3
+
-    oappend(SET_F("d.Sf.LC.max=500;"));
+    // add usermod pins as d.um_p array (TODO: usermod config shouldn't use state. instead we should load "um" object from cfg.json)
+    DynamicJsonDocument doc(JSON_BUFFER_SIZE);
+    JsonObject mods = doc.createNestedObject(F("mods"));
+    usermods.addToJsonState(mods);
+    if (!mods.isNull()) {
+      uint8_t i=0;
+      oappend(SET_F("d.um_p=["));
+      for (JsonPair kv : mods) {
+        if (strncmp_P(kv.key().c_str(),PSTR("pin_"),4) == 0) {
+          if (i++) oappend(SET_F(","));
+          oappend(itoa((int)kv.value(),nS,10));
+        }
+      }
+      oappend(SET_F("];"));
+    }
+
+    #if defined(WLED_MAX_BUSSES) && WLED_MAX_BUSSES>1
+      oappend(SET_F("addLEDs("));
+      oappend(itoa(WLED_MAX_BUSSES,nS,10));
+      oappend(SET_F(");"));
+    #endif
+
+    oappend(SET_F("d.Sf.LC.max=")); //TODO Formula for max LEDs on ESP8266 depending on types. 500 DMA or 1500 UART (about 4kB mem usage)
+    #if defined(ESP8266) && LEDPIN == 3
+    oappendi(MAX_LEDS_DMA);
     #else
-    oappend(SET_F("d.Sf.LC.max=1500;"));
+    oappendi(MAX_LEDS);
-    #endif
     #endif
+    oappend(";");
+
     sappend('v',SET_F("LC"),ledCount);
+
+    for (uint8_t s=0; s < busses.getNumBusses(); s++){
+      Bus* bus = busses.getBus(s);
+      char lp[4] = "L0"; lp[2] = 48+s; lp[3] = 0; //ascii 0-9 //strip data pin
+      char lk[4] = "L1"; lk[2] = 48+s; lk[3] = 0; //strip clock pin. 255 for none
+      char lc[4] = "LC"; lc[2] = 48+s; lc[3] = 0; //strip length
+      char co[4] = "CO"; co[2] = 48+s; co[3] = 0; //strip color order
+      char lt[4] = "LT"; lt[2] = 48+s; lt[3] = 0; //strip type
+      char ls[4] = "LS"; ls[2] = 48+s; ls[3] = 0; //strip start LED
+      char cv[4] = "CV"; cv[2] = 48+s; cv[3] = 0; //strip reverse
+      oappend(SET_F("addLEDs(1);"));
+      uint8_t pins[5];
+      uint8_t nPins = bus->getPins(pins);
+      sappend('v', lp, pins[0]);
+      if (pinManager.isPinOk(pins[1])) sappend('v', lk, pins[1]);
+      sappend('v', lc, bus->getLength());
+      sappend('v',lt,bus->getType());
+      sappend('v',co,bus->getColorOrder());
+      sappend('v',ls,bus->getStart());
+      sappend('c',cv,bus->reversed);
+    }
     sappend('v',SET_F("MA"),strip.ablMilliampsMax);
     sappend('v',SET_F("LA"),strip.milliampsPerLed);
     if (strip.currentMilliamps)
@@ -273,8 +319,8 @@ void getSettingsJS(byte subPage, char* dest)
     }
 
     sappend('v',SET_F("CA"),briS);
-    sappend('c',SET_F("EW"),useRGBW);
+    //sappend('c',SET_F("EW"),useRGBW);
-    sappend('i',SET_F("CO"),strip.getColorOrder());
+    //sappend('i',SET_F("CO"),strip.getColorOrder());
     sappend('v',SET_F("AW"),strip.rgbwMode);
 
     sappend('c',SET_F("BO"),turnOnAtBoot);
@@ -292,6 +338,11 @@ void getSettingsJS(byte subPage, char* dest)
     sappend('i',SET_F("PB"),strip.paletteBlend);
     sappend('c',SET_F("RV"),strip.reverseMode);
     sappend('c',SET_F("SL"),skipFirstLed);
+    sappend('v',SET_F("RL"),rlyPin);
+    sappend('c',SET_F("RM"),rlyMde);
+    sappend('v',SET_F("BT"),btnPin);
+    sappend('v',SET_F("IR"),irPin);
+    sappend('v',SET_F("AX"),auxPin);
   }
 
   if (subPage == 3)