Fix for Four Line Display usermod.
This commit is contained in:
parent
38bc618ee5
commit
4cdb18907f
@ -31,9 +31,33 @@ This usermod requires the `U8g2` and `Wire` libraries. See the
|
||||
`platformio_override.ini.sample` found in the Rotary Encoder
|
||||
UI usermod folder for how to include these using `platformio_override.ini`.
|
||||
|
||||
## Configuration
|
||||
|
||||
* `enabled` - enable/disable usermod
|
||||
* `pin` - GPIO pins used for display; I2C displays use Clk & Data; SPI displays can use SCK, MOSI, CS, DC & RST
|
||||
* `type` - display type in numeric format
|
||||
* 1 = I2C SSD1306 128x32
|
||||
* 2 = I2C SH1106 128x32
|
||||
* 3 = I2C SSD1306 128x64 (4 double-height lines)
|
||||
* 4 = I2C SSD1305 128x32
|
||||
* 5 = I2C SSD1305 128x64 (4 double-height lines)
|
||||
* 6 = SPI SSD1306 128x32
|
||||
* 7 = SPI SSD1306 128x64 (4 double-height lines)
|
||||
* `contrast` - set display contrast (higher contrast may reduce display lifetime)
|
||||
* `refreshRateSec` - time in seconds for display refresh
|
||||
* `screenTimeOutSec` - screen saver time-out in seconds
|
||||
* `flip` - flip/rotate display 180°
|
||||
* `sleepMode` - enable/disable screen saver
|
||||
* `clockMode` - enable/disable clock display in screen saver mode
|
||||
* `i2c-freq-kHz` - I2C clock frequency in kHz (may help reduce dropped frames, range: 400-3400)
|
||||
|
||||
## Change Log
|
||||
|
||||
2021-02
|
||||
* First public release
|
||||
|
||||
2021-04
|
||||
* Adaptation for runtime configuration.
|
||||
|
||||
2021-11
|
||||
* Added configuration option description.
|
@ -25,6 +25,10 @@
|
||||
|
||||
//The SCL and SDA pins are defined here.
|
||||
#ifdef ARDUINO_ARCH_ESP32
|
||||
#define HW_PIN_SCL 22
|
||||
#define HW_PIN_SDA 21
|
||||
#define HW_PIN_CLOCKSPI 18
|
||||
#define HW_PIN_DATASPI 23
|
||||
#ifndef FLD_PIN_SCL
|
||||
#define FLD_PIN_SCL 22
|
||||
#endif
|
||||
@ -47,6 +51,10 @@
|
||||
#define FLD_PIN_RESET 26
|
||||
#endif
|
||||
#else
|
||||
#define HW_PIN_SCL 5
|
||||
#define HW_PIN_SDA 4
|
||||
#define HW_PIN_CLOCKSPI 14
|
||||
#define HW_PIN_DATASPI 13
|
||||
#ifndef FLD_PIN_SCL
|
||||
#define FLD_PIN_SCL 5
|
||||
#endif
|
||||
@ -70,6 +78,14 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#ifndef FLD_TYPE
|
||||
#ifndef FLD_SPI_DEFAULT
|
||||
#define FLD_TYPE SSD1306
|
||||
#else
|
||||
#define FLD_TYPE SSD1306_SPI
|
||||
#endif
|
||||
#endif
|
||||
|
||||
// When to time out to the clock or blank the screen
|
||||
// if SLEEP_MODE_ENABLED.
|
||||
#define SCREEN_TIMEOUT_MS 60*1000 // 1 min
|
||||
@ -115,11 +131,11 @@ class FourLineDisplayUsermod : public Usermod {
|
||||
#ifndef FLD_SPI_DEFAULT
|
||||
int8_t ioPin[5] = {FLD_PIN_SCL, FLD_PIN_SDA, -1, -1, -1}; // I2C pins: SCL, SDA
|
||||
uint32_t ioFrequency = 400000; // in Hz (minimum is 100000, baseline is 400000 and maximum should be 3400000)
|
||||
DisplayType type = SSD1306; // display type
|
||||
#else
|
||||
int8_t ioPin[5] = {FLD_PIN_CLOCKSPI, FLD_PIN_DATASPI, FLD_PIN_CS, FLD_PIN_DC, FLD_PIN_RESET}; // SPI pins: CLK, MOSI, CS, DC, RST
|
||||
DisplayType type = SSD1306_SPI; // display type
|
||||
uint32_t ioFrequency = 1000000; // in Hz (minimum is 500kHz, baseline is 1MHz and maximum should be 20MHz)
|
||||
#endif
|
||||
DisplayType type = FLD_TYPE; // display type
|
||||
bool flip = false; // flip display 180°
|
||||
uint8_t contrast = 10; // screen contrast
|
||||
uint8_t lineHeight = 1; // 1 row or 2 rows
|
||||
@ -127,6 +143,7 @@ class FourLineDisplayUsermod : public Usermod {
|
||||
uint32_t screenTimeout = SCREEN_TIMEOUT_MS; // in ms
|
||||
bool sleepMode = true; // allow screen sleep?
|
||||
bool clockMode = false; // display clock
|
||||
bool enabled = true;
|
||||
|
||||
// Next variables hold the previous known values to determine if redraw is
|
||||
// required.
|
||||
@ -150,6 +167,7 @@ class FourLineDisplayUsermod : public Usermod {
|
||||
|
||||
// strings to reduce flash memory usage (used more than twice)
|
||||
static const char _name[];
|
||||
static const char _enabled[];
|
||||
static const char _contrast[];
|
||||
static const char _refreshRate[];
|
||||
static const char _screenTimeOut[];
|
||||
@ -169,88 +187,72 @@ class FourLineDisplayUsermod : public Usermod {
|
||||
// gets called once at boot. Do all initialization that doesn't depend on
|
||||
// network here
|
||||
void setup() {
|
||||
if (type == NONE) return;
|
||||
if (type == NONE || !enabled) return;
|
||||
|
||||
bool isHW;
|
||||
PinOwner po = PinOwner::UM_FourLineDisplay;
|
||||
if (type == SSD1306_SPI || type == SSD1306_SPI64) {
|
||||
isHW = (ioPin[0]==HW_PIN_CLOCKSPI && ioPin[1]==HW_PIN_DATASPI);
|
||||
PinManagerPinType pins[5] = { { ioPin[0], true }, { ioPin[1], true }, { ioPin[2], true }, { ioPin[3], true }, { ioPin[4], true }};
|
||||
if (!pinManager.allocateMultiplePins(pins, 5, PinOwner::UM_FourLineDisplay)) { type=NONE; return; }
|
||||
if (!pinManager.allocateMultiplePins(pins, 5, po)) { type=NONE; return; }
|
||||
} else {
|
||||
isHW = (ioPin[0]==HW_PIN_SCL && ioPin[1]==HW_PIN_SDA);
|
||||
PinManagerPinType pins[2] = { { ioPin[0], true }, { ioPin[1], true } };
|
||||
if (!pinManager.allocateMultiplePins(pins, 2, PinOwner::UM_FourLineDisplay)) { type=NONE; return; }
|
||||
if (ioPin[0]==HW_PIN_SCL && ioPin[1]==HW_PIN_SDA) po = PinOwner::HW_I2C; // allow multiple allocations of HW I2C bus pins
|
||||
if (!pinManager.allocateMultiplePins(pins, 2, po)) { type=NONE; return; }
|
||||
}
|
||||
|
||||
DEBUG_PRINTLN(F("Allocating display."));
|
||||
switch (type) {
|
||||
case SSD1306:
|
||||
#ifdef ESP8266
|
||||
if (!(ioPin[0]==5 && ioPin[1]==4))
|
||||
u8x8 = (U8X8 *) new U8X8_SSD1306_128X32_UNIVISION_SW_I2C(ioPin[0], ioPin[1]); // SCL, SDA, reset
|
||||
else
|
||||
#endif
|
||||
u8x8 = (U8X8 *) new U8X8_SSD1306_128X32_UNIVISION_HW_I2C(U8X8_PIN_NONE, ioPin[0], ioPin[1]); // Pins are Reset, SCL, SDA
|
||||
if (!isHW) u8x8 = (U8X8 *) new U8X8_SSD1306_128X32_UNIVISION_SW_I2C(ioPin[0], ioPin[1]); // SCL, SDA, reset
|
||||
else u8x8 = (U8X8 *) new U8X8_SSD1306_128X32_UNIVISION_HW_I2C(U8X8_PIN_NONE, ioPin[0], ioPin[1]); // Pins are Reset, SCL, SDA
|
||||
lineHeight = 1;
|
||||
break;
|
||||
case SH1106:
|
||||
#ifdef ESP8266
|
||||
if (!(ioPin[0]==5 && ioPin[1]==4))
|
||||
u8x8 = (U8X8 *) new U8X8_SH1106_128X64_WINSTAR_SW_I2C(ioPin[0], ioPin[1]); // SCL, SDA, reset
|
||||
else
|
||||
#endif
|
||||
u8x8 = (U8X8 *) new U8X8_SH1106_128X64_WINSTAR_HW_I2C(U8X8_PIN_NONE, ioPin[0], ioPin[1]); // Pins are Reset, SCL, SDA
|
||||
if (!isHW) u8x8 = (U8X8 *) new U8X8_SH1106_128X64_WINSTAR_SW_I2C(ioPin[0], ioPin[1]); // SCL, SDA, reset
|
||||
else u8x8 = (U8X8 *) new U8X8_SH1106_128X64_WINSTAR_HW_I2C(U8X8_PIN_NONE, ioPin[0], ioPin[1]); // Pins are Reset, SCL, SDA
|
||||
lineHeight = 2;
|
||||
break;
|
||||
case SSD1306_64:
|
||||
#ifdef ESP8266
|
||||
if (!(ioPin[0]==5 && ioPin[1]==4))
|
||||
u8x8 = (U8X8 *) new U8X8_SSD1306_128X64_NONAME_SW_I2C(ioPin[0], ioPin[1]); // SCL, SDA, reset
|
||||
else
|
||||
#endif
|
||||
u8x8 = (U8X8 *) new U8X8_SSD1306_128X64_NONAME_HW_I2C(U8X8_PIN_NONE, ioPin[0], ioPin[1]); // Pins are Reset, SCL, SDA
|
||||
if (!isHW) u8x8 = (U8X8 *) new U8X8_SSD1306_128X64_NONAME_SW_I2C(ioPin[0], ioPin[1]); // SCL, SDA, reset
|
||||
else u8x8 = (U8X8 *) new U8X8_SSD1306_128X64_NONAME_HW_I2C(U8X8_PIN_NONE, ioPin[0], ioPin[1]); // Pins are Reset, SCL, SDA
|
||||
lineHeight = 2;
|
||||
break;
|
||||
case SSD1305:
|
||||
#ifdef ESP8266
|
||||
if (!(ioPin[0]==5 && ioPin[1]==4))
|
||||
u8x8 = (U8X8 *) new U8X8_SSD1305_128X32_NONAME_SW_I2C(ioPin[0], ioPin[1]); // SCL, SDA, reset
|
||||
else
|
||||
#endif
|
||||
u8x8 = (U8X8 *) new U8X8_SSD1305_128X32_ADAFRUIT_HW_I2C(U8X8_PIN_NONE, ioPin[0], ioPin[1]); // Pins are Reset, SCL, SDA
|
||||
if (!isHW) u8x8 = (U8X8 *) new U8X8_SSD1305_128X32_NONAME_SW_I2C(ioPin[0], ioPin[1]); // SCL, SDA, reset
|
||||
else u8x8 = (U8X8 *) new U8X8_SSD1305_128X32_ADAFRUIT_HW_I2C(U8X8_PIN_NONE, ioPin[0], ioPin[1]); // Pins are Reset, SCL, SDA
|
||||
lineHeight = 1;
|
||||
break;
|
||||
case SSD1305_64:
|
||||
#ifdef ESP8266
|
||||
if (!(ioPin[0]==5 && ioPin[1]==4))
|
||||
u8x8 = (U8X8 *) new U8X8_SSD1305_128X64_ADAFRUIT_SW_I2C(ioPin[0], ioPin[1]); // SCL, SDA, reset
|
||||
else
|
||||
#endif
|
||||
u8x8 = (U8X8 *) new U8X8_SSD1305_128X64_ADAFRUIT_HW_I2C(U8X8_PIN_NONE, ioPin[0], ioPin[1]); // Pins are Reset, SCL, SDA
|
||||
if (!isHW) u8x8 = (U8X8 *) new U8X8_SSD1305_128X64_ADAFRUIT_SW_I2C(ioPin[0], ioPin[1]); // SCL, SDA, reset
|
||||
else u8x8 = (U8X8 *) new U8X8_SSD1305_128X64_ADAFRUIT_HW_I2C(U8X8_PIN_NONE, ioPin[0], ioPin[1]); // Pins are Reset, SCL, SDA
|
||||
lineHeight = 2;
|
||||
break;
|
||||
case SSD1306_SPI:
|
||||
if (!(ioPin[0]==FLD_PIN_CLOCKSPI && ioPin[1]==FLD_PIN_DATASPI)) // if not overridden these sould be HW accellerated
|
||||
u8x8 = (U8X8 *) new U8X8_SSD1306_128X32_UNIVISION_4W_SW_SPI(ioPin[0], ioPin[1], ioPin[2], ioPin[3], ioPin[4]);
|
||||
else
|
||||
u8x8 = (U8X8 *) new U8X8_SSD1306_128X32_UNIVISION_4W_HW_SPI(ioPin[2], ioPin[3], ioPin[4]); // Pins are cs, dc, reset
|
||||
if (!isHW) u8x8 = (U8X8 *) new U8X8_SSD1306_128X32_UNIVISION_4W_SW_SPI(ioPin[0], ioPin[1], ioPin[2], ioPin[3], ioPin[4]);
|
||||
else u8x8 = (U8X8 *) new U8X8_SSD1306_128X32_UNIVISION_4W_HW_SPI(ioPin[2], ioPin[3], ioPin[4]); // Pins are cs, dc, reset
|
||||
lineHeight = 1;
|
||||
break;
|
||||
case SSD1306_SPI64:
|
||||
if (!(ioPin[0]==FLD_PIN_CLOCKSPI && ioPin[1]==FLD_PIN_DATASPI)) // if not overridden these sould be HW accellerated
|
||||
u8x8 = (U8X8 *) new U8X8_SSD1306_128X64_NONAME_4W_SW_SPI(ioPin[0], ioPin[1], ioPin[2], ioPin[3], ioPin[4]);
|
||||
else
|
||||
u8x8 = (U8X8 *) new U8X8_SSD1306_128X64_NONAME_4W_HW_SPI(ioPin[2], ioPin[3], ioPin[4]); // Pins are cs, dc, reset
|
||||
if (!isHW) u8x8 = (U8X8 *) new U8X8_SSD1306_128X64_NONAME_4W_SW_SPI(ioPin[0], ioPin[1], ioPin[2], ioPin[3], ioPin[4]);
|
||||
else u8x8 = (U8X8 *) new U8X8_SSD1306_128X64_NONAME_4W_HW_SPI(ioPin[2], ioPin[3], ioPin[4]); // Pins are cs, dc, reset
|
||||
lineHeight = 2;
|
||||
break;
|
||||
default:
|
||||
u8x8 = nullptr;
|
||||
}
|
||||
|
||||
if (nullptr == u8x8) {
|
||||
DEBUG_PRINTLN(F("Display init failed."));
|
||||
for (byte i=0; i<5 && ioPin[i]>=0; i++) pinManager.deallocatePin(ioPin[i], PinOwner::UM_FourLineDisplay);
|
||||
pinManager.deallocateMultiplePins((const uint8_t*)ioPin, (type == SSD1306_SPI || type == SSD1306_SPI64) ? 5 : 2, po);
|
||||
type = NONE;
|
||||
return;
|
||||
}
|
||||
|
||||
initDone = true;
|
||||
DEBUG_PRINTLN(F("Starting display."));
|
||||
if (!(type == SSD1306_SPI || type == SSD1306_SPI64)) u8x8->setBusClock(ioFrequency); // can be used for SPI too
|
||||
/*if (!(type == SSD1306_SPI || type == SSD1306_SPI64))*/ u8x8->setBusClock(ioFrequency); // can be used for SPI too
|
||||
u8x8->begin();
|
||||
setFlipMode(flip);
|
||||
setContrast(contrast); //Contrast setup will help to preserve OLED lifetime. In case OLED need to be brighter increase number up to 255
|
||||
@ -266,7 +268,7 @@ class FourLineDisplayUsermod : public Usermod {
|
||||
* Da loop.
|
||||
*/
|
||||
void loop() {
|
||||
if (millis() - lastUpdate < (clockMode?1000:refreshRate) || strip.isUpdating()) return;
|
||||
if (!enabled || millis() - lastUpdate < (clockMode?1000:refreshRate) || strip.isUpdating()) return;
|
||||
lastUpdate = millis();
|
||||
|
||||
redraw(false);
|
||||
@ -276,40 +278,40 @@ class FourLineDisplayUsermod : public Usermod {
|
||||
* Wrappers for screen drawing
|
||||
*/
|
||||
void setFlipMode(uint8_t mode) {
|
||||
if (type==NONE) return;
|
||||
if (type == NONE || !enabled) return;
|
||||
u8x8->setFlipMode(mode);
|
||||
}
|
||||
void setContrast(uint8_t contrast) {
|
||||
if (type==NONE) return;
|
||||
if (type == NONE || !enabled) return;
|
||||
u8x8->setContrast(contrast);
|
||||
}
|
||||
void drawString(uint8_t col, uint8_t row, const char *string, bool ignoreLH=false) {
|
||||
if (type==NONE) return;
|
||||
if (type == NONE || !enabled) return;
|
||||
u8x8->setFont(u8x8_font_chroma48medium8_r);
|
||||
if (!ignoreLH && lineHeight==2) u8x8->draw1x2String(col, row, string);
|
||||
else u8x8->drawString(col, row, string);
|
||||
}
|
||||
void draw2x2String(uint8_t col, uint8_t row, const char *string) {
|
||||
if (type==NONE) return;
|
||||
if (type == NONE || !enabled) return;
|
||||
u8x8->setFont(u8x8_font_chroma48medium8_r);
|
||||
u8x8->draw2x2String(col, row, string);
|
||||
}
|
||||
void drawGlyph(uint8_t col, uint8_t row, char glyph, const uint8_t *font, bool ignoreLH=false) {
|
||||
if (type==NONE) return;
|
||||
if (type == NONE || !enabled) return;
|
||||
u8x8->setFont(font);
|
||||
if (!ignoreLH && lineHeight==2) u8x8->draw1x2Glyph(col, row, glyph);
|
||||
else u8x8->drawGlyph(col, row, glyph);
|
||||
}
|
||||
uint8_t getCols() {
|
||||
if (type==NONE) return 0;
|
||||
if (type==NONE || !enabled) return 0;
|
||||
return u8x8->getCols();
|
||||
}
|
||||
void clear() {
|
||||
if (type==NONE) return;
|
||||
if (type == NONE || !enabled) return;
|
||||
u8x8->clear();
|
||||
}
|
||||
void setPowerSave(uint8_t save) {
|
||||
if (type==NONE) return;
|
||||
if (type == NONE || !enabled) return;
|
||||
u8x8->setPowerSave(save);
|
||||
}
|
||||
|
||||
@ -327,7 +329,7 @@ class FourLineDisplayUsermod : public Usermod {
|
||||
static bool showName = false;
|
||||
unsigned long now = millis();
|
||||
|
||||
if (type==NONE) return;
|
||||
if (type == NONE || !enabled) return;
|
||||
if (overlayUntil > 0) {
|
||||
if (now >= overlayUntil) {
|
||||
// Time to display the overlay has elapsed.
|
||||
@ -438,6 +440,7 @@ class FourLineDisplayUsermod : public Usermod {
|
||||
|
||||
void drawLine(uint8_t line, Line4Type lineType) {
|
||||
char lineBuffer[LINE_BUFFER_SIZE];
|
||||
uint8_t printedChars;
|
||||
switch(lineType) {
|
||||
case FLD_LINE_BRIGHTNESS:
|
||||
sprintf_P(lineBuffer, PSTR("Brightness %3d"), bri);
|
||||
@ -452,10 +455,16 @@ class FourLineDisplayUsermod : public Usermod {
|
||||
drawString(2, line*lineHeight, lineBuffer);
|
||||
break;
|
||||
case FLD_LINE_MODE:
|
||||
showCurrentEffectOrPalette(knownMode, JSON_mode_names, line);
|
||||
printedChars = extractModeName(knownMode, JSON_mode_names, lineBuffer, LINE_BUFFER_SIZE-1);
|
||||
for (;printedChars < getCols()-2 && printedChars < LINE_BUFFER_SIZE-3; printedChars++) lineBuffer[printedChars]=' ';
|
||||
lineBuffer[printedChars] = 0;
|
||||
drawString(2, line*lineHeight, lineBuffer);
|
||||
break;
|
||||
case FLD_LINE_PALETTE:
|
||||
showCurrentEffectOrPalette(knownPalette, JSON_palette_names, line);
|
||||
printedChars = extractModeName(knownPalette, JSON_palette_names, lineBuffer, LINE_BUFFER_SIZE-1);
|
||||
for (;printedChars < getCols()-2 && printedChars < LINE_BUFFER_SIZE-3; printedChars++) lineBuffer[printedChars]=' ';
|
||||
lineBuffer[printedChars] = 0;
|
||||
drawString(2, line*lineHeight, lineBuffer);
|
||||
break;
|
||||
case FLD_LINE_TIME:
|
||||
default:
|
||||
@ -464,41 +473,6 @@ class FourLineDisplayUsermod : public Usermod {
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* Display the current effect or palette (desiredEntry)
|
||||
* on the appropriate line (row).
|
||||
*/
|
||||
void showCurrentEffectOrPalette(int knownMode, const char *qstring, uint8_t row) {
|
||||
char lineBuffer[LINE_BUFFER_SIZE];
|
||||
uint8_t qComma = 0;
|
||||
bool insideQuotes = false;
|
||||
uint8_t printedChars = 0;
|
||||
char singleJsonSymbol;
|
||||
|
||||
// Find the mode name in JSON
|
||||
for (size_t i = 0; i < strlen_P(qstring); i++) {
|
||||
singleJsonSymbol = pgm_read_byte_near(qstring + i);
|
||||
if (singleJsonSymbol == '\0') break;
|
||||
switch (singleJsonSymbol) {
|
||||
case '"':
|
||||
insideQuotes = !insideQuotes;
|
||||
break;
|
||||
case '[':
|
||||
case ']':
|
||||
break;
|
||||
case ',':
|
||||
qComma++;
|
||||
default:
|
||||
if (!insideQuotes || (qComma != knownMode)) break;
|
||||
lineBuffer[printedChars++] = singleJsonSymbol;
|
||||
}
|
||||
if ((qComma > knownMode) || (printedChars >= getCols()-2) || printedChars >= sizeof(lineBuffer)-2) break;
|
||||
}
|
||||
for (;printedChars < getCols()-2 && printedChars < sizeof(lineBuffer)-2; printedChars++) lineBuffer[printedChars]=' ';
|
||||
lineBuffer[printedChars] = 0;
|
||||
drawString(2, row*lineHeight, lineBuffer);
|
||||
}
|
||||
|
||||
/**
|
||||
* If there screen is off or in clock is displayed,
|
||||
* this will return true. This allows us to throw away
|
||||
@ -506,6 +480,7 @@ class FourLineDisplayUsermod : public Usermod {
|
||||
* to wake up the screen.
|
||||
*/
|
||||
bool wakeDisplay() {
|
||||
if (type == NONE || !enabled) return false;
|
||||
knownHour = 99;
|
||||
if (displayTurnedOff) {
|
||||
// Turn the display back on
|
||||
@ -522,6 +497,8 @@ class FourLineDisplayUsermod : public Usermod {
|
||||
* Clears the screen and prints on the middle two lines.
|
||||
*/
|
||||
void overlay(const char* line1, const char *line2, long showHowLong) {
|
||||
if (type == NONE || !enabled) return;
|
||||
|
||||
if (displayTurnedOff) {
|
||||
// Turn the display back on (includes clear())
|
||||
sleepOrClock(false);
|
||||
@ -583,6 +560,7 @@ class FourLineDisplayUsermod : public Usermod {
|
||||
* the useAMPM configuration.
|
||||
*/
|
||||
void showTime(bool fullScreen = true) {
|
||||
if (type == NONE || !enabled) return;
|
||||
char lineBuffer[LINE_BUFFER_SIZE];
|
||||
|
||||
updateLocalTime();
|
||||
@ -676,10 +654,12 @@ class FourLineDisplayUsermod : public Usermod {
|
||||
*/
|
||||
void addToConfig(JsonObject& root) {
|
||||
JsonObject top = root.createNestedObject(FPSTR(_name));
|
||||
top[FPSTR(_enabled)] = enabled;
|
||||
JsonArray io_pin = top.createNestedArray("pin");
|
||||
for (byte i=0; i<5; i++) io_pin.add(ioPin[i]);
|
||||
top["help4PinTypes"] = F("Clk,Data,CS,DC,RST"); // help for Settings page
|
||||
top["help4Pins"] = F("Clk,Data,CS,DC,RST"); // help for Settings page
|
||||
top["type"] = type;
|
||||
top["help4Type"] = F("1=SSD1306,2=SH1106,3=SSD1306_128x64,4=SSD1305,5=SSD1305_128x64,6=SSD1306_SPI,7=SSD1306_SPI_128x64"); // help for Settings page
|
||||
top[FPSTR(_flip)] = (bool) flip;
|
||||
top[FPSTR(_contrast)] = contrast;
|
||||
top[FPSTR(_refreshRate)] = refreshRate/1000;
|
||||
@ -710,6 +690,7 @@ class FourLineDisplayUsermod : public Usermod {
|
||||
return false;
|
||||
}
|
||||
|
||||
enabled = top[FPSTR(_enabled)] | enabled;
|
||||
newType = top["type"] | newType;
|
||||
for (byte i=0; i<5; i++) newPin[i] = top["pin"][i] | ioPin[i];
|
||||
flip = top[FPSTR(_flip)] | flip;
|
||||
@ -718,6 +699,9 @@ class FourLineDisplayUsermod : public Usermod {
|
||||
screenTimeout = (top[FPSTR(_screenTimeOut)] | screenTimeout/1000) * 1000;
|
||||
sleepMode = top[FPSTR(_sleepMode)] | sleepMode;
|
||||
clockMode = top[FPSTR(_clockMode)] | clockMode;
|
||||
if (newType == SSD1306_SPI || newType == SSD1306_SPI64)
|
||||
ioFrequency = min(20000, max(500, (int)(top[FPSTR(_busClkFrequency)] | ioFrequency/1000))) * 1000; // limit frequency
|
||||
else
|
||||
ioFrequency = min(3400, max(100, (int)(top[FPSTR(_busClkFrequency)] | ioFrequency/1000))) * 1000; // limit frequency
|
||||
|
||||
DEBUG_PRINT(FPSTR(_name));
|
||||
@ -733,10 +717,10 @@ class FourLineDisplayUsermod : public Usermod {
|
||||
for (byte i=0; i<5; i++) if (ioPin[i] != newPin[i]) { pinsChanged = true; break; }
|
||||
if (pinsChanged || type!=newType) {
|
||||
if (type != NONE) delete u8x8;
|
||||
for (byte i=0; i<5; i++) {
|
||||
if (ioPin[i]>=0) pinManager.deallocatePin(ioPin[i], PinOwner::UM_FourLineDisplay);
|
||||
ioPin[i] = newPin[i];
|
||||
}
|
||||
PinOwner po = PinOwner::UM_FourLineDisplay;
|
||||
if (ioPin[0]==HW_PIN_SCL && ioPin[1]==HW_PIN_SDA) po = PinOwner::HW_I2C; // allow multiple allocations of HW I2C bus pins
|
||||
pinManager.deallocateMultiplePins((const uint8_t *)ioPin, (type == SSD1306_SPI || type == SSD1306_SPI64) ? 5 : 2, po);
|
||||
for (byte i=0; i<5; i++) ioPin[i] = newPin[i];
|
||||
if (ioPin[0]<0 || ioPin[1]<0) { // data & clock must be > -1
|
||||
type = NONE;
|
||||
return true;
|
||||
@ -750,7 +734,7 @@ class FourLineDisplayUsermod : public Usermod {
|
||||
if (needsRedraw && !wakeDisplay()) redraw(true);
|
||||
}
|
||||
// use "return !top["newestParameter"].isNull();" when updating Usermod with new features
|
||||
return !(top[_busClkFrequency]).isNull();
|
||||
return !top[FPSTR(_enabled)].isNull();
|
||||
}
|
||||
|
||||
/*
|
||||
@ -764,6 +748,7 @@ class FourLineDisplayUsermod : public Usermod {
|
||||
|
||||
// strings to reduce flash memory usage (used more than twice)
|
||||
const char FourLineDisplayUsermod::_name[] PROGMEM = "4LineDisplay";
|
||||
const char FourLineDisplayUsermod::_enabled[] PROGMEM = "enabled";
|
||||
const char FourLineDisplayUsermod::_contrast[] PROGMEM = "contrast";
|
||||
const char FourLineDisplayUsermod::_refreshRate[] PROGMEM = "refreshRateSec";
|
||||
const char FourLineDisplayUsermod::_screenTimeOut[] PROGMEM = "screenTimeOutSec";
|
||||
|
Loading…
Reference in New Issue
Block a user