Merge branch '0_14' of https://github.com/aircoookie/WLED into merge-0_14

usermods/PWM_fan/usermod_PWM_fan.h

@@ -48,8 +48,8 @@ class PWMFanUsermod : public Usermod {
     int8_t  tachoPin          = TACHO_PIN;
     int8_t  pwmPin            = PWM_PIN;
     uint8_t tachoUpdateSec    = 30;
-    float   targetTemperature = 25.0;
+    float   targetTemperature = 35.0;
-    uint8_t minPWMValuePct    = 50;
+    uint8_t minPWMValuePct    = 0;
     uint8_t numberOfInterrupsInOneSingleRotation = 2;     // Number of interrupts ESP32 sees on tacho signal on a single fan rotation. All the fans I've seen trigger two interrups.
     uint8_t pwmValuePct       = 0;
 

usermods/usermod_v2_auto_save/readme.md

@@ -1,20 +1,17 @@
 # Auto Save
 
 v2 Usermod to automatically save settings
-to preset number AUTOSAVE_PRESET_NUM after a change to any of
+to preset number AUTOSAVE_PRESET_NUM after a change to any of:
-
 * brightness
 * effect speed
 * effect intensity
 * mode (effect)
 * palette
 
-but it will wait for AUTOSAVE_SETTLE_MS milliseconds, a "settle" 
+but it will wait for AUTOSAVE_AFTER_SEC seconds,
-period in case there are other changes (any change will 
+a "settle" period in case there are other changes (any change will extend the "settle" window).
-extend the "settle" window).
 
-It will additionally load preset AUTOSAVE_PRESET_NUM at startup.
+It will additionally load preset AUTOSAVE_PRESET_NUM at startup during the first `loop()`.
-during the first `loop()`.  Reasoning below.
 
 AutoSaveUsermod is standalone, but if FourLineDisplayUsermod is installed, it will notify the user of the saved changes.
 
@@ -29,9 +26,20 @@ This file should be placed in the same directory as `platformio.ini`.
 ### Define Your Options
 
 * `USERMOD_AUTO_SAVE`           - define this to have this the Auto Save usermod included wled00\usermods_list.cpp
-* `USERMOD_FOUR_LINE_DISPLAY`  - define this to have this the Four Line Display mod included wled00\usermods_list.cpp - also tells this usermod that the display is available (see the Four Line Display usermod `readme.md` for more details)
+* `AUTOSAVE_AFTER_SEC`          - define the delay time after the settings auto-saving routine should be executed
+* `AUTOSAVE_PRESET_NUM`         - define the preset number used by autosave usermod
+* `USERMOD_AUTO_SAVE_ON_BOOT`   - define if autosave should be enabled on boot
+* `USERMOD_FOUR_LINE_DISPLAY`   - define this to have this the Four Line Display mod included wled00\usermods_list.cpp
+                                    also tells this usermod that the display is available
+                                    (see the Four Line Display usermod `readme.md` for more details)
 
-You can configure auto-save parameters using Usermods settings page.
+Example to add in platformio_override:
+  -D USERMOD_AUTO_SAVE
+  -D AUTOSAVE_AFTER_SEC=10
+  -D AUTOSAVE_PRESET_NUM=100
+  -D USERMOD_AUTO_SAVE_ON_BOOT=true
+
+You can also configure auto-save parameters using Usermods settings page.
 
 ### PlatformIO requirements
 

usermods/usermod_v2_auto_save/usermod_v2_auto_save.h

@@ -33,9 +33,23 @@ class AutoSaveUsermod : public Usermod {
     bool enabled = true;
 
     // configurable parameters
+    #ifdef AUTOSAVE_AFTER_SEC
+    uint16_t autoSaveAfterSec = AUTOSAVE_AFTER_SEC;
+    #else
     uint16_t autoSaveAfterSec = 15;       // 15s by default
+    #endif
+
+    #ifdef AUTOSAVE_PRESET_NUM
+    uint8_t autoSavePreset = AUTOSAVE_PRESET_NUM;
+    #else
     uint8_t autoSavePreset = 250;         // last possible preset
+    #endif
+
+    #ifdef USERMOD_AUTO_SAVE_ON_BOOT
+    bool applyAutoSaveOnBoot = USERMOD_AUTO_SAVE_ON_BOOT; 
+    #else
     bool applyAutoSaveOnBoot = false;     // do we load auto-saved preset on boot?
+    #endif
 
     // If we've detected the need to auto save, this will be non zero.
     unsigned long autoSaveAfter = 0;

usermods/usermod_v2_rotary_encoder_ui/readme.md

@@ -16,10 +16,16 @@ This file should be placed in the same directory as `platformio.ini`.
 ### Define Your Options
 
 * `USERMOD_ROTARY_ENCODER_UI`       - define this to have this user mod included wled00\usermods_list.cpp
-* `USERMOD_FOUR_LINE_DISPLAY`  - define this to have this the Four Line Display mod included wled00\usermods_list.cpp - also tells this usermod that the display is available (see the Four Line Display usermod `readme.md` for more details)
+* `USERMOD_ROTARY_ENCODER_GPIO`     - define the GPIO function (INPUT, INPUT_PULLUP, etc...)
+* `USERMOD_FOUR_LINE_DISPLAY`       - define this to have this the Four Line Display mod included wled00\usermods_list.cpp
+                                        also tells this usermod that the display is available
+                                        (see the Four Line Display usermod `readme.md` for more details)
 * `ENCODER_DT_PIN`                  - The encoders DT pin, defaults to 12
 * `ENCODER_CLK_PIN`                 - The encoders CLK pin, defaults to 14
 * `ENCODER_SW_PIN`                  - The encoders SW pin, defaults to 13
+* `USERMOD_ROTARY_ENCODER_GPIO`     - The GPIO functionality:
+                                        `INPUT_PULLUP` to use internal pull-up
+                                        `INPUT` to use pull-up on the PCB
 
 ### PlatformIO requirements
 

usermods/usermod_v2_rotary_encoder_ui/usermod_v2_rotary_encoder_ui.h

@@ -110,9 +110,13 @@ public:
       return;
     }
 
-    pinMode(pinA, INPUT_PULLUP);
+    #ifndef USERMOD_ROTARY_ENCODER_GPIO
-    pinMode(pinB, INPUT_PULLUP);
+      #define USERMOD_ROTARY_ENCODER_GPIO INPUT_PULLUP
-    pinMode(pinC, INPUT_PULLUP);
+    #endif
+    pinMode(pinA, USERMOD_ROTARY_ENCODER_GPIO);
+    pinMode(pinB, USERMOD_ROTARY_ENCODER_GPIO);
+    pinMode(pinC, USERMOD_ROTARY_ENCODER_GPIO);
+
     currentTime = millis();
     loopTime = currentTime;
 

usermods/usermod_v2_rotary_encoder_ui_ALT/usermod_v2_rotary_encoder_ui_ALT.h

@@ -278,9 +278,13 @@ public:
       return;
     }
 
-    pinMode(pinA, INPUT_PULLUP);
+    #ifndef USERMOD_ROTARY_ENCODER_GPIO
-    pinMode(pinB, INPUT_PULLUP);
+      #define USERMOD_ROTARY_ENCODER_GPIO INPUT_PULLUP
-    pinMode(pinC, INPUT_PULLUP);
+    #endif
+    pinMode(pinA, USERMOD_ROTARY_ENCODER_GPIO);
+    pinMode(pinB, USERMOD_ROTARY_ENCODER_GPIO);
+    pinMode(pinC, USERMOD_ROTARY_ENCODER_GPIO);
+
     loopTime = millis();
 
     currentCCT = (approximateKelvinFromRGB(RGBW32(col[0], col[1], col[2], col[3])) - 1900) >> 5;

wled00/const.h

@@ -318,7 +318,9 @@
 #ifndef ABL_MILLIAMPS_DEFAULT
   #define ABL_MILLIAMPS_DEFAULT 850   // auto lower brightness to stay close to milliampere limit
 #else
-  #if ABL_MILLIAMPS_DEFAULT < 250  // make sure value is at least 250
+  #if ABL_MILLIAMPS_DEFAULT == 0      // disable ABL
+  #elif ABL_MILLIAMPS_DEFAULT < 250   // make sure value is at least 250
+   #warning "make sure value is at least 250"
    #define ABL_MILLIAMPS_DEFAULT 250
   #endif
 #endif

wled00/wled.h

@@ -27,7 +27,7 @@
 //#define WLED_DISABLE_ALEXA       // saves 11kb
 //#define WLED_DISABLE_BLYNK       // saves 6kb
 //#define WLED_DISABLE_HUESYNC     // saves 4kb
-//#define WLED_DISABLE_INFRARED    // saves 12kb
+//#define WLED_DISABLE_INFRARED    // saves 12kb, there is no pin left for this on ESP8266-01
 #ifndef WLED_DISABLE_MQTT
   #define WLED_ENABLE_MQTT         // saves 12kb
 #endif