Merge branch 'master' into patch-api

This commit is contained in:
Blaz Kristan 2022-02-10 13:48:48 +01:00
commit 55817f31f9
12 changed files with 176 additions and 143 deletions

View File

@ -22,12 +22,12 @@
// 10 bits
#ifndef USERMOD_SN_PHOTORESISTOR_ADC_PRECISION
#define USERMOD_SN_PHOTORESISTOR_ADC_PRECISION 1024.0
#define USERMOD_SN_PHOTORESISTOR_ADC_PRECISION 1024.0f
#endif
// resistor size 10K hms
#ifndef USERMOD_SN_PHOTORESISTOR_RESISTOR_VALUE
#define USERMOD_SN_PHOTORESISTOR_RESISTOR_VALUE 10000.0
#define USERMOD_SN_PHOTORESISTOR_RESISTOR_VALUE 10000.0f
#endif
// only report if differance grater than offset value

View File

@ -21,10 +21,10 @@
#ifndef USERMOD_BATTERY_ADC_PRECISION
#ifdef ARDUINO_ARCH_ESP32
// 12 bits
#define USERMOD_BATTERY_ADC_PRECISION 4095.0
#define USERMOD_BATTERY_ADC_PRECISION 4095.0f
#else
// 10 bits
#define USERMOD_BATTERY_ADC_PRECISION 1024.0
#define USERMOD_BATTERY_ADC_PRECISION 1024.0f
#endif
#endif
@ -39,11 +39,11 @@
// https://batterybro.com/blogs/18650-wholesale-battery-reviews/18852515-when-to-recycle-18650-batteries-and-how-to-start-a-collection-center-in-your-vape-shop
// Discharge voltage: 2.5 volt + .1 for personal safety
#ifndef USERMOD_BATTERY_MIN_VOLTAGE
#define USERMOD_BATTERY_MIN_VOLTAGE 2.6
#define USERMOD_BATTERY_MIN_VOLTAGE 2.6f
#endif
#ifndef USERMOD_BATTERY_MAX_VOLTAGE
#define USERMOD_BATTERY_MAX_VOLTAGE 4.2
#define USERMOD_BATTERY_MAX_VOLTAGE 4.2f
#endif
class UsermodBatteryBasic : public Usermod

View File

@ -272,7 +272,7 @@ class MultiRelay : public Usermod {
void publishHomeAssistantAutodiscovery() {
for (uint8_t i = 0; i < MULTI_RELAY_MAX_RELAYS; i++) {
char uid[16], json_str[1024], buf[128];
char uid[24], json_str[1024], buf[128];
size_t payload_size;
sprintf_P(uid, PSTR("%s_sw%d"), escapedMac.c_str(), i);

View File

@ -31,9 +31,33 @@ This usermod requires the `U8g2` and `Wire` libraries. See the
`platformio_override.ini.sample` found in the Rotary Encoder
UI usermod folder for how to include these using `platformio_override.ini`.
## Configuration
* `enabled` - enable/disable usermod
* `pin` - GPIO pins used for display; I2C displays use Clk & Data; SPI displays can use SCK, MOSI, CS, DC & RST
* `type` - display type in numeric format
* 1 = I2C SSD1306 128x32
* 2 = I2C SH1106 128x32
* 3 = I2C SSD1306 128x64 (4 double-height lines)
* 4 = I2C SSD1305 128x32
* 5 = I2C SSD1305 128x64 (4 double-height lines)
* 6 = SPI SSD1306 128x32
* 7 = SPI SSD1306 128x64 (4 double-height lines)
* `contrast` - set display contrast (higher contrast may reduce display lifetime)
* `refreshRateSec` - time in seconds for display refresh
* `screenTimeOutSec` - screen saver time-out in seconds
* `flip` - flip/rotate display 180°
* `sleepMode` - enable/disable screen saver
* `clockMode` - enable/disable clock display in screen saver mode
* `i2c-freq-kHz` - I2C clock frequency in kHz (may help reduce dropped frames, range: 400-3400)
## Change Log
2021-02
* First public release
2021-04
* Adaptation for runtime configuration.
2021-11
* Added configuration option description.

View File

@ -25,6 +25,10 @@
//The SCL and SDA pins are defined here.
#ifdef ARDUINO_ARCH_ESP32
#define HW_PIN_SCL 22
#define HW_PIN_SDA 21
#define HW_PIN_CLOCKSPI 18
#define HW_PIN_DATASPI 23
#ifndef FLD_PIN_SCL
#define FLD_PIN_SCL 22
#endif
@ -47,6 +51,10 @@
#define FLD_PIN_RESET 26
#endif
#else
#define HW_PIN_SCL 5
#define HW_PIN_SDA 4
#define HW_PIN_CLOCKSPI 14
#define HW_PIN_DATASPI 13
#ifndef FLD_PIN_SCL
#define FLD_PIN_SCL 5
#endif
@ -70,6 +78,14 @@
#endif
#endif
#ifndef FLD_TYPE
#ifndef FLD_SPI_DEFAULT
#define FLD_TYPE SSD1306
#else
#define FLD_TYPE SSD1306_SPI
#endif
#endif
// When to time out to the clock or blank the screen
// if SLEEP_MODE_ENABLED.
#define SCREEN_TIMEOUT_MS 60*1000 // 1 min
@ -115,11 +131,11 @@ class FourLineDisplayUsermod : public Usermod {
#ifndef FLD_SPI_DEFAULT
int8_t ioPin[5] = {FLD_PIN_SCL, FLD_PIN_SDA, -1, -1, -1}; // I2C pins: SCL, SDA
uint32_t ioFrequency = 400000; // in Hz (minimum is 100000, baseline is 400000 and maximum should be 3400000)
DisplayType type = SSD1306; // display type
#else
int8_t ioPin[5] = {FLD_PIN_CLOCKSPI, FLD_PIN_DATASPI, FLD_PIN_CS, FLD_PIN_DC, FLD_PIN_RESET}; // SPI pins: CLK, MOSI, CS, DC, RST
DisplayType type = SSD1306_SPI; // display type
uint32_t ioFrequency = 1000000; // in Hz (minimum is 500kHz, baseline is 1MHz and maximum should be 20MHz)
#endif
DisplayType type = FLD_TYPE; // display type
bool flip = false; // flip display 180°
uint8_t contrast = 10; // screen contrast
uint8_t lineHeight = 1; // 1 row or 2 rows
@ -127,6 +143,7 @@ class FourLineDisplayUsermod : public Usermod {
uint32_t screenTimeout = SCREEN_TIMEOUT_MS; // in ms
bool sleepMode = true; // allow screen sleep?
bool clockMode = false; // display clock
bool enabled = true;
// Next variables hold the previous known values to determine if redraw is
// required.
@ -150,6 +167,7 @@ class FourLineDisplayUsermod : public Usermod {
// strings to reduce flash memory usage (used more than twice)
static const char _name[];
static const char _enabled[];
static const char _contrast[];
static const char _refreshRate[];
static const char _screenTimeOut[];
@ -169,88 +187,72 @@ class FourLineDisplayUsermod : public Usermod {
// gets called once at boot. Do all initialization that doesn't depend on
// network here
void setup() {
if (type == NONE) return;
if (type == NONE || !enabled) return;
bool isHW;
PinOwner po = PinOwner::UM_FourLineDisplay;
if (type == SSD1306_SPI || type == SSD1306_SPI64) {
PinManagerPinType pins[5] = { { ioPin[0], true }, { ioPin[1], true}, { ioPin[2], true }, { ioPin[3], true}, { ioPin[4], true }};
if (!pinManager.allocateMultiplePins(pins, 5, PinOwner::UM_FourLineDisplay)) { type=NONE; return; }
isHW = (ioPin[0]==HW_PIN_CLOCKSPI && ioPin[1]==HW_PIN_DATASPI);
PinManagerPinType pins[5] = { { ioPin[0], true }, { ioPin[1], true }, { ioPin[2], true }, { ioPin[3], true }, { ioPin[4], true }};
if (!pinManager.allocateMultiplePins(pins, 5, po)) { type=NONE; return; }
} else {
PinManagerPinType pins[2] = { { ioPin[0], true }, { ioPin[1], true} };
if (!pinManager.allocateMultiplePins(pins, 2, PinOwner::UM_FourLineDisplay)) { type=NONE; return; }
isHW = (ioPin[0]==HW_PIN_SCL && ioPin[1]==HW_PIN_SDA);
PinManagerPinType pins[2] = { { ioPin[0], true }, { ioPin[1], true } };
if (ioPin[0]==HW_PIN_SCL && ioPin[1]==HW_PIN_SDA) po = PinOwner::HW_I2C; // allow multiple allocations of HW I2C bus pins
if (!pinManager.allocateMultiplePins(pins, 2, po)) { type=NONE; return; }
}
DEBUG_PRINTLN(F("Allocating display."));
switch (type) {
case SSD1306:
#ifdef ESP8266
if (!(ioPin[0]==5 && ioPin[1]==4))
u8x8 = (U8X8 *) new U8X8_SSD1306_128X32_UNIVISION_SW_I2C(ioPin[0], ioPin[1]); // SCL, SDA, reset
else
#endif
u8x8 = (U8X8 *) new U8X8_SSD1306_128X32_UNIVISION_HW_I2C(U8X8_PIN_NONE, ioPin[0], ioPin[1]); // Pins are Reset, SCL, SDA
if (!isHW) u8x8 = (U8X8 *) new U8X8_SSD1306_128X32_UNIVISION_SW_I2C(ioPin[0], ioPin[1]); // SCL, SDA, reset
else u8x8 = (U8X8 *) new U8X8_SSD1306_128X32_UNIVISION_HW_I2C(U8X8_PIN_NONE, ioPin[0], ioPin[1]); // Pins are Reset, SCL, SDA
lineHeight = 1;
break;
case SH1106:
#ifdef ESP8266
if (!(ioPin[0]==5 && ioPin[1]==4))
u8x8 = (U8X8 *) new U8X8_SH1106_128X64_WINSTAR_SW_I2C(ioPin[0], ioPin[1]); // SCL, SDA, reset
else
#endif
u8x8 = (U8X8 *) new U8X8_SH1106_128X64_WINSTAR_HW_I2C(U8X8_PIN_NONE, ioPin[0], ioPin[1]); // Pins are Reset, SCL, SDA
if (!isHW) u8x8 = (U8X8 *) new U8X8_SH1106_128X64_WINSTAR_SW_I2C(ioPin[0], ioPin[1]); // SCL, SDA, reset
else u8x8 = (U8X8 *) new U8X8_SH1106_128X64_WINSTAR_HW_I2C(U8X8_PIN_NONE, ioPin[0], ioPin[1]); // Pins are Reset, SCL, SDA
lineHeight = 2;
break;
case SSD1306_64:
#ifdef ESP8266
if (!(ioPin[0]==5 && ioPin[1]==4))
u8x8 = (U8X8 *) new U8X8_SSD1306_128X64_NONAME_SW_I2C(ioPin[0], ioPin[1]); // SCL, SDA, reset
else
#endif
u8x8 = (U8X8 *) new U8X8_SSD1306_128X64_NONAME_HW_I2C(U8X8_PIN_NONE, ioPin[0], ioPin[1]); // Pins are Reset, SCL, SDA
if (!isHW) u8x8 = (U8X8 *) new U8X8_SSD1306_128X64_NONAME_SW_I2C(ioPin[0], ioPin[1]); // SCL, SDA, reset
else u8x8 = (U8X8 *) new U8X8_SSD1306_128X64_NONAME_HW_I2C(U8X8_PIN_NONE, ioPin[0], ioPin[1]); // Pins are Reset, SCL, SDA
lineHeight = 2;
break;
case SSD1305:
#ifdef ESP8266
if (!(ioPin[0]==5 && ioPin[1]==4))
u8x8 = (U8X8 *) new U8X8_SSD1305_128X32_NONAME_SW_I2C(ioPin[0], ioPin[1]); // SCL, SDA, reset
else
#endif
u8x8 = (U8X8 *) new U8X8_SSD1305_128X32_ADAFRUIT_HW_I2C(U8X8_PIN_NONE, ioPin[0], ioPin[1]); // Pins are Reset, SCL, SDA
if (!isHW) u8x8 = (U8X8 *) new U8X8_SSD1305_128X32_NONAME_SW_I2C(ioPin[0], ioPin[1]); // SCL, SDA, reset
else u8x8 = (U8X8 *) new U8X8_SSD1305_128X32_ADAFRUIT_HW_I2C(U8X8_PIN_NONE, ioPin[0], ioPin[1]); // Pins are Reset, SCL, SDA
lineHeight = 1;
break;
case SSD1305_64:
#ifdef ESP8266
if (!(ioPin[0]==5 && ioPin[1]==4))
u8x8 = (U8X8 *) new U8X8_SSD1305_128X64_ADAFRUIT_SW_I2C(ioPin[0], ioPin[1]); // SCL, SDA, reset
else
#endif
u8x8 = (U8X8 *) new U8X8_SSD1305_128X64_ADAFRUIT_HW_I2C(U8X8_PIN_NONE, ioPin[0], ioPin[1]); // Pins are Reset, SCL, SDA
if (!isHW) u8x8 = (U8X8 *) new U8X8_SSD1305_128X64_ADAFRUIT_SW_I2C(ioPin[0], ioPin[1]); // SCL, SDA, reset
else u8x8 = (U8X8 *) new U8X8_SSD1305_128X64_ADAFRUIT_HW_I2C(U8X8_PIN_NONE, ioPin[0], ioPin[1]); // Pins are Reset, SCL, SDA
lineHeight = 2;
break;
case SSD1306_SPI:
if (!(ioPin[0]==FLD_PIN_CLOCKSPI && ioPin[1]==FLD_PIN_DATASPI)) // if not overridden these sould be HW accellerated
u8x8 = (U8X8 *) new U8X8_SSD1306_128X32_UNIVISION_4W_SW_SPI(ioPin[0], ioPin[1], ioPin[2], ioPin[3], ioPin[4]);
else
u8x8 = (U8X8 *) new U8X8_SSD1306_128X32_UNIVISION_4W_HW_SPI(ioPin[2], ioPin[3], ioPin[4]); // Pins are cs, dc, reset
if (!isHW) u8x8 = (U8X8 *) new U8X8_SSD1306_128X32_UNIVISION_4W_SW_SPI(ioPin[0], ioPin[1], ioPin[2], ioPin[3], ioPin[4]);
else u8x8 = (U8X8 *) new U8X8_SSD1306_128X32_UNIVISION_4W_HW_SPI(ioPin[2], ioPin[3], ioPin[4]); // Pins are cs, dc, reset
lineHeight = 1;
break;
case SSD1306_SPI64:
if (!(ioPin[0]==FLD_PIN_CLOCKSPI && ioPin[1]==FLD_PIN_DATASPI)) // if not overridden these sould be HW accellerated
u8x8 = (U8X8 *) new U8X8_SSD1306_128X64_NONAME_4W_SW_SPI(ioPin[0], ioPin[1], ioPin[2], ioPin[3], ioPin[4]);
else
u8x8 = (U8X8 *) new U8X8_SSD1306_128X64_NONAME_4W_HW_SPI(ioPin[2], ioPin[3], ioPin[4]); // Pins are cs, dc, reset
if (!isHW) u8x8 = (U8X8 *) new U8X8_SSD1306_128X64_NONAME_4W_SW_SPI(ioPin[0], ioPin[1], ioPin[2], ioPin[3], ioPin[4]);
else u8x8 = (U8X8 *) new U8X8_SSD1306_128X64_NONAME_4W_HW_SPI(ioPin[2], ioPin[3], ioPin[4]); // Pins are cs, dc, reset
lineHeight = 2;
break;
default:
u8x8 = nullptr;
}
if (nullptr == u8x8) {
DEBUG_PRINTLN(F("Display init failed."));
for (byte i=0; i<5 && ioPin[i]>=0; i++) pinManager.deallocatePin(ioPin[i], PinOwner::UM_FourLineDisplay);
pinManager.deallocateMultiplePins((const uint8_t*)ioPin, (type == SSD1306_SPI || type == SSD1306_SPI64) ? 5 : 2, po);
type = NONE;
return;
}
initDone = true;
DEBUG_PRINTLN(F("Starting display."));
if (!(type == SSD1306_SPI || type == SSD1306_SPI64)) u8x8->setBusClock(ioFrequency); // can be used for SPI too
/*if (!(type == SSD1306_SPI || type == SSD1306_SPI64))*/ u8x8->setBusClock(ioFrequency); // can be used for SPI too
u8x8->begin();
setFlipMode(flip);
setContrast(contrast); //Contrast setup will help to preserve OLED lifetime. In case OLED need to be brighter increase number up to 255
@ -266,7 +268,7 @@ class FourLineDisplayUsermod : public Usermod {
* Da loop.
*/
void loop() {
if (millis() - lastUpdate < (clockMode?1000:refreshRate) || strip.isUpdating()) return;
if (!enabled || millis() - lastUpdate < (clockMode?1000:refreshRate) || strip.isUpdating()) return;
lastUpdate = millis();
redraw(false);
@ -276,40 +278,40 @@ class FourLineDisplayUsermod : public Usermod {
* Wrappers for screen drawing
*/
void setFlipMode(uint8_t mode) {
if (type==NONE) return;
if (type == NONE || !enabled) return;
u8x8->setFlipMode(mode);
}
void setContrast(uint8_t contrast) {
if (type==NONE) return;
if (type == NONE || !enabled) return;
u8x8->setContrast(contrast);
}
void drawString(uint8_t col, uint8_t row, const char *string, bool ignoreLH=false) {
if (type==NONE) return;
if (type == NONE || !enabled) return;
u8x8->setFont(u8x8_font_chroma48medium8_r);
if (!ignoreLH && lineHeight==2) u8x8->draw1x2String(col, row, string);
else u8x8->drawString(col, row, string);
}
void draw2x2String(uint8_t col, uint8_t row, const char *string) {
if (type==NONE) return;
if (type == NONE || !enabled) return;
u8x8->setFont(u8x8_font_chroma48medium8_r);
u8x8->draw2x2String(col, row, string);
}
void drawGlyph(uint8_t col, uint8_t row, char glyph, const uint8_t *font, bool ignoreLH=false) {
if (type==NONE) return;
if (type == NONE || !enabled) return;
u8x8->setFont(font);
if (!ignoreLH && lineHeight==2) u8x8->draw1x2Glyph(col, row, glyph);
else u8x8->drawGlyph(col, row, glyph);
}
uint8_t getCols() {
if (type==NONE) return 0;
if (type==NONE || !enabled) return 0;
return u8x8->getCols();
}
void clear() {
if (type==NONE) return;
if (type == NONE || !enabled) return;
u8x8->clear();
}
void setPowerSave(uint8_t save) {
if (type==NONE) return;
if (type == NONE || !enabled) return;
u8x8->setPowerSave(save);
}
@ -327,7 +329,7 @@ class FourLineDisplayUsermod : public Usermod {
static bool showName = false;
unsigned long now = millis();
if (type==NONE) return;
if (type == NONE || !enabled) return;
if (overlayUntil > 0) {
if (now >= overlayUntil) {
// Time to display the overlay has elapsed.
@ -438,6 +440,7 @@ class FourLineDisplayUsermod : public Usermod {
void drawLine(uint8_t line, Line4Type lineType) {
char lineBuffer[LINE_BUFFER_SIZE];
uint8_t printedChars;
switch(lineType) {
case FLD_LINE_BRIGHTNESS:
sprintf_P(lineBuffer, PSTR("Brightness %3d"), bri);
@ -452,10 +455,16 @@ class FourLineDisplayUsermod : public Usermod {
drawString(2, line*lineHeight, lineBuffer);
break;
case FLD_LINE_MODE:
showCurrentEffectOrPalette(knownMode, JSON_mode_names, line);
printedChars = extractModeName(knownMode, JSON_mode_names, lineBuffer, LINE_BUFFER_SIZE-1);
for (;printedChars < getCols()-2 && printedChars < LINE_BUFFER_SIZE-3; printedChars++) lineBuffer[printedChars]=' ';
lineBuffer[printedChars] = 0;
drawString(2, line*lineHeight, lineBuffer);
break;
case FLD_LINE_PALETTE:
showCurrentEffectOrPalette(knownPalette, JSON_palette_names, line);
printedChars = extractModeName(knownPalette, JSON_palette_names, lineBuffer, LINE_BUFFER_SIZE-1);
for (;printedChars < getCols()-2 && printedChars < LINE_BUFFER_SIZE-3; printedChars++) lineBuffer[printedChars]=' ';
lineBuffer[printedChars] = 0;
drawString(2, line*lineHeight, lineBuffer);
break;
case FLD_LINE_TIME:
default:
@ -464,41 +473,6 @@ class FourLineDisplayUsermod : public Usermod {
}
}
/**
* Display the current effect or palette (desiredEntry)
* on the appropriate line (row).
*/
void showCurrentEffectOrPalette(int knownMode, const char *qstring, uint8_t row) {
char lineBuffer[LINE_BUFFER_SIZE];
uint8_t qComma = 0;
bool insideQuotes = false;
uint8_t printedChars = 0;
char singleJsonSymbol;
// Find the mode name in JSON
for (size_t i = 0; i < strlen_P(qstring); i++) {
singleJsonSymbol = pgm_read_byte_near(qstring + i);
if (singleJsonSymbol == '\0') break;
switch (singleJsonSymbol) {
case '"':
insideQuotes = !insideQuotes;
break;
case '[':
case ']':
break;
case ',':
qComma++;
default:
if (!insideQuotes || (qComma != knownMode)) break;
lineBuffer[printedChars++] = singleJsonSymbol;
}
if ((qComma > knownMode) || (printedChars >= getCols()-2) || printedChars >= sizeof(lineBuffer)-2) break;
}
for (;printedChars < getCols()-2 && printedChars < sizeof(lineBuffer)-2; printedChars++) lineBuffer[printedChars]=' ';
lineBuffer[printedChars] = 0;
drawString(2, row*lineHeight, lineBuffer);
}
/**
* If there screen is off or in clock is displayed,
* this will return true. This allows us to throw away
@ -506,6 +480,7 @@ class FourLineDisplayUsermod : public Usermod {
* to wake up the screen.
*/
bool wakeDisplay() {
if (type == NONE || !enabled) return false;
knownHour = 99;
if (displayTurnedOff) {
// Turn the display back on
@ -522,6 +497,8 @@ class FourLineDisplayUsermod : public Usermod {
* Clears the screen and prints on the middle two lines.
*/
void overlay(const char* line1, const char *line2, long showHowLong) {
if (type == NONE || !enabled) return;
if (displayTurnedOff) {
// Turn the display back on (includes clear())
sleepOrClock(false);
@ -583,6 +560,7 @@ class FourLineDisplayUsermod : public Usermod {
* the useAMPM configuration.
*/
void showTime(bool fullScreen = true) {
if (type == NONE || !enabled) return;
char lineBuffer[LINE_BUFFER_SIZE];
updateLocalTime();
@ -676,10 +654,12 @@ class FourLineDisplayUsermod : public Usermod {
*/
void addToConfig(JsonObject& root) {
JsonObject top = root.createNestedObject(FPSTR(_name));
top[FPSTR(_enabled)] = enabled;
JsonArray io_pin = top.createNestedArray("pin");
for (byte i=0; i<5; i++) io_pin.add(ioPin[i]);
top["help4PinTypes"] = F("Clk,Data,CS,DC,RST"); // help for Settings page
top["help4Pins"] = F("Clk,Data,CS,DC,RST"); // help for Settings page
top["type"] = type;
top["help4Type"] = F("1=SSD1306,2=SH1106,3=SSD1306_128x64,4=SSD1305,5=SSD1305_128x64,6=SSD1306_SPI,7=SSD1306_SPI_128x64"); // help for Settings page
top[FPSTR(_flip)] = (bool) flip;
top[FPSTR(_contrast)] = contrast;
top[FPSTR(_refreshRate)] = refreshRate/1000;
@ -710,6 +690,7 @@ class FourLineDisplayUsermod : public Usermod {
return false;
}
enabled = top[FPSTR(_enabled)] | enabled;
newType = top["type"] | newType;
for (byte i=0; i<5; i++) newPin[i] = top["pin"][i] | ioPin[i];
flip = top[FPSTR(_flip)] | flip;
@ -718,6 +699,9 @@ class FourLineDisplayUsermod : public Usermod {
screenTimeout = (top[FPSTR(_screenTimeOut)] | screenTimeout/1000) * 1000;
sleepMode = top[FPSTR(_sleepMode)] | sleepMode;
clockMode = top[FPSTR(_clockMode)] | clockMode;
if (newType == SSD1306_SPI || newType == SSD1306_SPI64)
ioFrequency = min(20000, max(500, (int)(top[FPSTR(_busClkFrequency)] | ioFrequency/1000))) * 1000; // limit frequency
else
ioFrequency = min(3400, max(100, (int)(top[FPSTR(_busClkFrequency)] | ioFrequency/1000))) * 1000; // limit frequency
DEBUG_PRINT(FPSTR(_name));
@ -733,10 +717,10 @@ class FourLineDisplayUsermod : public Usermod {
for (byte i=0; i<5; i++) if (ioPin[i] != newPin[i]) { pinsChanged = true; break; }
if (pinsChanged || type!=newType) {
if (type != NONE) delete u8x8;
for (byte i=0; i<5; i++) {
if (ioPin[i]>=0) pinManager.deallocatePin(ioPin[i], PinOwner::UM_FourLineDisplay);
ioPin[i] = newPin[i];
}
PinOwner po = PinOwner::UM_FourLineDisplay;
if (ioPin[0]==HW_PIN_SCL && ioPin[1]==HW_PIN_SDA) po = PinOwner::HW_I2C; // allow multiple allocations of HW I2C bus pins
pinManager.deallocateMultiplePins((const uint8_t *)ioPin, (type == SSD1306_SPI || type == SSD1306_SPI64) ? 5 : 2, po);
for (byte i=0; i<5; i++) ioPin[i] = newPin[i];
if (ioPin[0]<0 || ioPin[1]<0) { // data & clock must be > -1
type = NONE;
return true;
@ -750,7 +734,7 @@ class FourLineDisplayUsermod : public Usermod {
if (needsRedraw && !wakeDisplay()) redraw(true);
}
// use "return !top["newestParameter"].isNull();" when updating Usermod with new features
return !(top[_busClkFrequency]).isNull();
return !top[FPSTR(_enabled)].isNull();
}
/*
@ -764,6 +748,7 @@ class FourLineDisplayUsermod : public Usermod {
// strings to reduce flash memory usage (used more than twice)
const char FourLineDisplayUsermod::_name[] PROGMEM = "4LineDisplay";
const char FourLineDisplayUsermod::_enabled[] PROGMEM = "enabled";
const char FourLineDisplayUsermod::_contrast[] PROGMEM = "contrast";
const char FourLineDisplayUsermod::_refreshRate[] PROGMEM = "refreshRateSec";
const char FourLineDisplayUsermod::_screenTimeOut[] PROGMEM = "screenTimeOutSec";

View File

@ -81,7 +81,6 @@
#define SEGLEN _virtualSegmentLength
#define SEGACT SEGMENT.stop
#define SPEED_FORMULA_L 5U + (50U*(255U - SEGMENT.speed))/SEGLEN
#define RESET_RUNTIME memset(_segment_runtimes, 0, sizeof(_segment_runtimes))
// some common colors
#define RED (uint32_t)0xFF0000
@ -409,8 +408,9 @@ class WS2812FX {
* Flags that before the next effect is calculated,
* the internal segment state should be reset.
* Call resetIfRequired before calling the next effect function.
* Safe to call from interrupts and network requests.
*/
inline void reset() { _requiresReset = true; }
inline void markForReset() { _requiresReset = true; }
private:
uint16_t _dataLen = 0;
bool _requiresReset = false;

View File

@ -67,7 +67,12 @@
//do not call this method from system context (network callback)
void WS2812FX::finalizeInit(void)
{
RESET_RUNTIME;
//reset segment runtimes
for (uint8_t i = 0; i < MAX_NUM_SEGMENTS; i++) {
_segment_runtimes[i].markForReset();
_segment_runtimes[i].resetIfRequired();
}
_hasWhiteChannel = _isOffRefreshRequired = false;
//if busses failed to load, add default (fresh install, FS issue, ...)
@ -373,7 +378,7 @@ void WS2812FX::setMode(uint8_t segid, uint8_t m) {
if (_segments[segid].mode != m)
{
_segment_runtimes[segid].reset();
_segment_runtimes[segid].markForReset();
_segments[segid].mode = m;
}
}
@ -612,12 +617,12 @@ void WS2812FX::setSegment(uint8_t n, uint16_t i1, uint16_t i2, uint8_t grouping,
seg.spacing = spacing;
}
if (offset < UINT16_MAX) seg.offset = offset;
_segment_runtimes[n].reset();
_segment_runtimes[n].markForReset();
}
void WS2812FX::restartRuntime() {
for (uint8_t i = 0; i < MAX_NUM_SEGMENTS; i++) {
_segment_runtimes[i].reset();
_segment_runtimes[i].markForReset();
}
}
@ -648,9 +653,9 @@ void WS2812FX::resetSegments() {
_segments[i].cct = 127;
_segments[i].speed = DEFAULT_SPEED;
_segments[i].intensity = DEFAULT_INTENSITY;
_segment_runtimes[i].reset();
_segment_runtimes[i].markForReset();
}
_segment_runtimes[0].reset();
_segment_runtimes[0].markForReset();
}
void WS2812FX::makeAutoSegments() {

View File

@ -72,21 +72,23 @@ void doublePressAction(uint8_t b)
bool isButtonPressed(uint8_t i)
{
if (btnPin[i]<0) return false;
uint8_t pin = btnPin[i];
switch (buttonType[i]) {
case BTN_TYPE_NONE:
case BTN_TYPE_RESERVED:
break;
case BTN_TYPE_PUSH:
case BTN_TYPE_SWITCH:
if (digitalRead(btnPin[i]) == LOW) return true;
if (digitalRead(pin) == LOW) return true;
break;
case BTN_TYPE_PUSH_ACT_HIGH:
case BTN_TYPE_PIR_SENSOR:
if (digitalRead(btnPin[i]) == HIGH) return true;
if (digitalRead(pin) == HIGH) return true;
break;
case BTN_TYPE_TOUCH:
#if defined(ARDUINO_ARCH_ESP32) && !defined(CONFIG_IDF_TARGET_ESP32C3)
if (touchRead(btnPin[i]) <= touchThreshold) return true;
if (touchRead(pin) <= touchThreshold) return true;
#endif
break;
}

View File

@ -132,6 +132,13 @@ bool PinManagerClass::allocateMultiplePins(const managed_pin_type * mptArray, by
byte bi = gpio - 8*by;
bitWrite(pinAlloc[by], bi, true);
ownerTag[gpio] = tag;
#ifdef WLED_DEBUG
DEBUG_PRINT(F("PIN ALLOC: Pin "));
DEBUG_PRINT(gpio);
DEBUG_PRINT(F(" allocated by "));
DebugPrintOwnerTag(tag);
DEBUG_PRINTLN(F(""));
#endif
}
return true;
}
@ -155,6 +162,13 @@ bool PinManagerClass::allocatePin(byte gpio, bool output, PinOwner tag)
byte bi = gpio - 8*by;
bitWrite(pinAlloc[by], bi, true);
ownerTag[gpio] = tag;
#ifdef WLED_DEBUG
DEBUG_PRINT(F("PIN ALLOC: Pin "));
DEBUG_PRINT(gpio);
DEBUG_PRINT(F(" allocated by "));
DebugPrintOwnerTag(tag);
DEBUG_PRINTLN(F(""));
#endif
return true;
}

View File

@ -225,7 +225,7 @@ WLED_GLOBAL int8_t btnPin[WLED_MAX_BUTTONS] _INIT({0});
WLED_GLOBAL int8_t btnPin[WLED_MAX_BUTTONS] _INIT({BTNPIN});
#endif
#ifndef RLYPIN
WLED_GLOBAL int8_t rlyPin _INIT(12);
WLED_GLOBAL int8_t rlyPin _INIT(-1);
#else
WLED_GLOBAL int8_t rlyPin _INIT(RLYPIN);
#endif

View File

@ -80,36 +80,41 @@ float asin_t(float x) {
return res;
}
//https://stackoverflow.com/a/42542593
#define A 0.0776509570923569
#define B -0.287434475393028
#define C ((HALF_PI/2) - A - B)
//polynominal factors for approximation between 1 and 5
#define C0 0.089494f
#define C1 0.974207f
#define C2 -0.326175f
#define C3 0.05375f
#define C4 -0.003445f
// declare a template with no implementation, and only one specialization
// this allows hiding the constants, while ensuring ODR causes optimizations
// to still apply. (Fixes issues with conflicting 3rd party #define's)
template <typename T> T atan_t(T x);
template<>
float atan_t(float x) {
bool neg = (x < 0);
//For A/B/C, see https://stackoverflow.com/a/42542593
static const double A { 0.0776509570923569 };
static const double B { -0.287434475393028 };
static const double C { ((HALF_PI/2) - A - B) };
// polynominal factors for approximation between 1 and 5
static const float C0 { 0.089494f };
static const float C1 { 0.974207f };
static const float C2 { -0.326175f };
static const float C3 { 0.05375f };
static const float C4 { -0.003445f };
#ifdef WLED_DEBUG_MATH
float xinput = x;
#endif
bool neg = (x < 0);
x = std::abs(x);
float res;
if (x > 5.0f) { //atan(x) converges to pi/2 - (1/x) for large values
if (x > 5.0f) { // atan(x) converges to pi/2 - (1/x) for large values
res = HALF_PI - (1.0f/x);
}
else if (x > 1.0f) { //1 < x < 5
} else if (x > 1.0f) { //1 < x < 5
float xx = x * x;
res = (C4*xx*xx)+(C3*xx*x)+(C2*xx)+(C1*x)+C0;
} else { //this approximation is only for x <= 1
} else { // this approximation is only for x <= 1
float xx = x * x;
res = ((A*xx + B)*xx + C)*x;
}
if (neg) res = -res;
if (neg) {
res = -res;
}
#ifdef WLED_DEBUG_MATH
Serial.printf("atan,%f,%f,%f\n",xinput,res,atan(xinput));
#endif

View File

@ -46,8 +46,6 @@ void handleSerial()
static byte red = 0x00;
static byte green = 0x00;
uint16_t nBytes = 0;
while (Serial.available() > 0)
{
yield();