Merge branch 'master' into groupfinal

platformio.ini

@@ -4,14 +4,17 @@
 [platformio]
 src_dir = ./wled00
 data_dir = ./wled00/data
-lib_extra_dirs = ./wled00/src
+;lib_extra_dirs = ./wled00/src
+lib_dir = ./wled00/src
 ; Please uncomment one of the 5 lines below to select your board
 ; env_default = nodemcuv2
 ; env_default = esp01
 ; env_default = esp01_1m
 ; env_default = d1_mini
 ; env_default = esp32dev
-
+; env_default = esp8285_4CH_MagicHome
+; env_default = esp8285_4CH_H801
+; env_default = esp8285_5CH_H801
 
 [common]
 framework = arduino
@@ -38,6 +41,8 @@ lib_deps_external =
   IRremoteESP8266@2.5.5
   #Time@1.5
   #Timezone@1.2.1
+  #For use SSD1306 0.91" OLED display uncomment following
+  #U8g2@~2.27.2
 
 [common:esp8266]
 # ------------------------------------------------------------------------------
@@ -77,7 +82,7 @@ build_flags =
   -D WLED_DISABLE_BLYNK
   -D WLED_DISABLE_CRONIXIE
   ; -D WLED_DISABLE_HUESYNC
-  -D WLED_DISABLE_INFRARED
+  ; -D WLED_DISABLE_INFRARED
 
 [common:esp8266_512k]
 platform = espressif8266@1.8.0
@@ -89,8 +94,8 @@ build_flags =
   ; -D WLED_DISABLE_ALEXA
   -D WLED_DISABLE_BLYNK
   -D WLED_DISABLE_CRONIXIE
-  ; -D WLED_DISABLE_HUESYNC
+  -D WLED_DISABLE_HUESYNC
-  -D WLED_DISABLE_INFRARED
+  ; -D WLED_DISABLE_INFRARED
 
 [common:esp32]
 platform = espressif32@1.11.1
@@ -147,6 +152,7 @@ framework = ${common.framework}
 build_flags =
   ${common.build_flags}
   ${common:esp8266_512k.build_flags}
+  -D WLED_DISABLE_INFRARED
 lib_deps =
   ${common.lib_deps_external}
 
@@ -165,3 +171,49 @@ lib_deps =
 lib_ignore =
   IRremoteESP8266
   ESPAsyncUDP
+
+[env:esp8285_4CH_MagicHome]
+board = esp8285
+platform = ${common:esp8266_1M.platform}
+monitor_speed = ${common.monitor_speed}
+upload_speed = ${common.upload_speed}
+framework = ${common.framework}
+build_flags =
+  ${common.build_flags}
+  ${common:esp8266_1M.build_flags}
+  -D WLED_DISABLE_HUESYNC
+  -D WLED_ENABLE_ANALOG_LEDS
+lib_deps =
+  ${common.lib_deps_external}
+
+[env:esp8285_4CH_H801]
+board = esp8285
+platform = ${common:esp8266_1M.platform}
+monitor_speed = ${common.monitor_speed}
+upload_speed = ${common.upload_speed}
+framework = ${common.framework}
+build_flags =
+  ${common.build_flags}
+  ${common:esp8266_1M.build_flags}
+  -D WLED_DISABLE_HUESYNC
+  -D WLED_ENABLE_ANALOG_LEDS
+  -D WLED_USE_H801
+lib_deps =
+  ${common.lib_deps_external}
+
+[env:esp8285_5CH_H801]
+board = esp8285
+platform = ${common:esp8266_1M.platform}
+monitor_speed = ${common.monitor_speed}
+upload_speed = ${common.upload_speed}
+framework = ${common.framework}
+build_flags =
+  ${common.build_flags}
+  ${common:esp8266_1M.build_flags}
+  -D WLED_DISABLE_HUESYNC
+  -D WLED_ENABLE_ANALOG_LEDS
+  -D WLED_USE_H801
+  -D WLED_ENABLE_5CH_LEDS 
+lib_deps =
+  ${common.lib_deps_external}
+  

readme.md

@@ -10,13 +10,14 @@
 A fast and feature-rich implementation of an ESP8266/ESP32 webserver to control NeoPixel (WS2812B, WS2811, SK6812, APA102) LEDs!
 
 ### Features:
-- WS2812FX library integrated for 80 special effects   
+- WS2812FX library integrated for almost 90 special effects  
 - FastLED noise effects and palettes  
-- Customizable Mobile and desktop UI with color and effect controls  
+- Modern UI with color, effect and segment controls  
+- Segments to set different effects and colors to parts of the LEDs  
 - Settings page - configuration over network  
 - Access Point and station mode - automatic failsafe AP  
 - Support for RGBW strips  
-- 25 user presets to save and load colors/effects easily, supports cycling through them.  
+- 16 user presets to save and load colors/effects easily, supports cycling through them.  
 - Macro functions to automatically execute API calls  
 - Nightlight function (gradually dims down)  
 - Full OTA software updatability (HTTP + ArduinoOTA), password protectable  

usermods/QuinLED_Dig_Uno_Temp_MQTT/readme.txt

@@ -4,5 +4,5 @@ This code uses Aircookie's WLED software. It has a premade file for user modific
 
 To install:
 
-Add the enties in the WLED00 file to the top of the same file from Aircoookies WLED.
+Add the entries in the WLED00 file to the top of the same file from Aircoookies WLED.
 Replace the WLED06_usermod.ino file in Aircoookies WLED folder.

usermods/rotary_encoder_change_effect/wled06_usermod.ino

@@ -0,0 +1,45 @@
+//Use userVar0 and userVar1 (API calls &U0=,&U1=, uint16_t)
+
+long lastTime = 0;
+int delayMs = 10;
+const int pinA = D6; //data
+const int pinB = D7; //clk
+int oldA = LOW;
+
+//gets called once at boot. Do all initialization that doesn't depend on network here
+void userSetup() {
+  pinMode(pinA, INPUT_PULLUP);
+  pinMode(pinB, INPUT_PULLUP);
+}
+
+//gets called every time WiFi is (re-)connected. Initialize own network interfaces here
+void userConnected() {
+}
+
+//loop. You can use "if (WLED_CONNECTED)" to check for successful connection
+void userLoop() {
+  if (millis()-lastTime > delayMs) {
+    int A = digitalRead(pinA);
+    int B = digitalRead(pinB);
+
+    if (oldA == LOW && A == HIGH) {
+      if (oldB == HIGH) {
+      // bri += 10;
+      // if (bri > 250) bri = 10;
+      effectCurrent += 1;
+      if (effectCurrent >= MODE_COUNT) effectCurrent = 0;
+    }
+    else {
+      // bri -= 10;
+      // if (bri < 10) bri = 250;
+      effectCurrent -= 1;
+      if (effectCurrent < 0) effectCurrent = (MODE_COUNT-1);
+    }
+    oldA = A;
+
+    //call for notifier -> 0: init 1: direct change 2: button 3: notification 4: nightlight 5: other (No notification)
+    // 6: fx changed 7: hue 8: preset cycle 9: blynk 10: alexa
+    colorUpdated(6);
+    lastTime = millis();
+  }
+}

usermods/ssd1306_i2c_oled_u8g2/wled06_usermod.ino

@@ -1,12 +1,18 @@
 #include <U8x8lib.h> // from https://github.com/olikraus/u8g2/
 
+//The SCL and SDA pins are defined here. 
+//Lolin32 boards use SCL=5 SDA=4 
+#define U8X8_PIN_SCL 5
+#define U8X8_PIN_SDA 4
+
+
 // If display does not work or looks corrupted check the
 // constructor reference:
 // https://github.com/olikraus/u8g2/wiki/u8x8setupcpp
 // or check the gallery:
 // https://github.com/olikraus/u8g2/wiki/gallery
-U8X8_SSD1306_128X32_UNIVISION_HW_I2C u8x8(U8X8_PIN_NONE, 5,
+U8X8_SSD1306_128X32_UNIVISION_HW_I2C u8x8(U8X8_PIN_NONE, U8X8_PIN_SCL,
-                                          4); // Pins are Reset, SCL, SDA
+                                          U8X8_PIN_SDA); // Pins are Reset, SCL, SDA
 
 // gets called once at boot. Do all initialization that doesn't depend on
 // network here
@@ -63,7 +69,11 @@ void userLoop() {
   needRedraw = false;
 
   // Update last known values.
+  #if defined(ESP8266)
   knownSsid = apActive ? WiFi.softAPSSID() : WiFi.SSID();
+  #else
+  knownSsid = WiFi.SSID();
+  #endif
   knownIp = apActive ? IPAddress(4, 3, 2, 1) : WiFi.localIP();
   knownBrightness = bri;
   knownMode = strip.getMode();
@@ -74,9 +84,9 @@ void userLoop() {
 
   // First row with Wifi name
   u8x8.setCursor(1, 0);
-  u8x8.print(ssid.substring(0, u8x8.getCols() > 1 ? u8x8.getCols() - 2 : 0));
+  u8x8.print(knownSsid.substring(0, u8x8.getCols() > 1 ? u8x8.getCols() - 2 : 0));
   // Print `~` char to indicate that SSID is longer, than owr dicplay
-  if (ssid.length() > u8x8.getCols())
+  if (knownSsid.length() > u8x8.getCols())
     u8x8.print("~");
 
   // Second row with IP or Psssword
@@ -85,7 +95,7 @@ void userLoop() {
   if (apActive && bri == 0)
     u8x8.print(apPass);
   else
-    u8x8.print(ip);
+    u8x8.print(knownIp);
 
   // Third row with mode name
   u8x8.setCursor(2, 2);

wled00/FX.h

@@ -42,12 +42,19 @@
 
 /* Not used in all effects yet */
 #define WLED_FPS         42
-#define FRAMETIME        1000/WLED_FPS
+#define FRAMETIME        (1000/WLED_FPS)
 
-/* each segment uses 41 bytes of SRAM memory, so if you're application fails because of
+/* each segment uses 52 bytes of SRAM memory, so if you're application fails because of
   insufficient memory, decreasing MAX_NUM_SEGMENTS may help */
 #define MAX_NUM_SEGMENTS 10
 
+/* How much data bytes all segments combined may allocate */
+#ifdef ESP8266
+#define MAX_SEGMENT_DATA 2048
+#else
+#define MAX_SEGMENT_DATA 8192
+#endif
+
 #define NUM_COLORS       3 /* number of colors per segment */
 #define SEGMENT          _segments[_segment_index]
 #define SEGCOLOR(x)      gamma32(_segments[_segment_index].colors[x])
@@ -84,7 +91,7 @@
 #define IS_REVERSE      ((SEGMENT.options & REVERSE )     == REVERSE     )
 #define IS_SELECTED     ((SEGMENT.options & SELECTED)     == SELECTED    )
 
-#define MODE_COUNT  87
+#define MODE_COUNT  96
 
 #define FX_MODE_STATIC                   0
 #define FX_MODE_BLINK                    1
@@ -173,11 +180,23 @@
 #define FX_MODE_TRI_STATIC_PATTERN      84
 #define FX_MODE_SPOTS                   85
 #define FX_MODE_SPOTS_FADE              86
+#define FX_MODE_GLITTER                 87
+#define FX_MODE_CANDLE                  88
+#define FX_MODE_STARBURST               89
+#define FX_MODE_EXPLODING_FIREWORKS     90
+#define FX_MODE_BOUNCINGBALLS           91
+#define FX_MODE_SINELON                 92
+#define FX_MODE_SINELON_DUAL            93
+#define FX_MODE_SINELON_RAINBOW         94
+#define FX_MODE_POPCORN                 95
 
 
 class WS2812FX {
   typedef uint16_t (WS2812FX::*mode_ptr)(void);
 
+  // pre show callback
+  typedef void (*show_callback) (void);
+  
   // segment parameters
   public:
     typedef struct Segment { // 25 bytes
@@ -223,13 +242,33 @@ class WS2812FX {
     } segment;
 
   // segment runtime parameters
-    typedef struct Segment_runtime { // 16 bytes
+    typedef struct Segment_runtime { // 28 bytes
       unsigned long next_time;
       uint32_t step;
       uint32_t call;
       uint16_t aux0;
       uint16_t aux1;
-      void reset(){next_time = 0; step = 0; call = 0; aux0 = 0; aux1 = 0;};
+      byte* data = nullptr;
+      bool allocateData(uint16_t len){
+        if (data && _dataLen == len) return true; //already allocated
+        deallocateData();
+        if (WS2812FX::_usedSegmentData + len > MAX_SEGMENT_DATA) return false; //not enough memory
+        data = new (std::nothrow) byte[len];
+        if (!data) return false; //allocation failed
+        WS2812FX::_usedSegmentData += len;
+        _dataLen = len;
+        memset(data, 0, len);
+        return true;
+      }
+      void deallocateData(){
+        delete[] data;
+        data = nullptr;
+        WS2812FX::_usedSegmentData -= _dataLen;
+        _dataLen = 0;
+      }
+      void reset(){next_time = 0; step = 0; call = 0; aux0 = 0; aux1 = 0; deallocateData();}
+      private:
+        uint16_t _dataLen = 0;
     } segment_runtime;
 
     WS2812FX() {
@@ -321,6 +360,15 @@ class WS2812FX {
       _mode[FX_MODE_TRI_STATIC_PATTERN]      = &WS2812FX::mode_tri_static_pattern;
       _mode[FX_MODE_SPOTS]                   = &WS2812FX::mode_spots;
       _mode[FX_MODE_SPOTS_FADE]              = &WS2812FX::mode_spots_fade;
+      _mode[FX_MODE_GLITTER]                 = &WS2812FX::mode_glitter;
+      _mode[FX_MODE_CANDLE]                  = &WS2812FX::mode_candle;
+      _mode[FX_MODE_STARBURST]               = &WS2812FX::mode_starburst;
+      _mode[FX_MODE_EXPLODING_FIREWORKS]     = &WS2812FX::mode_exploding_fireworks;
+      _mode[FX_MODE_BOUNCINGBALLS]           = &WS2812FX::mode_bouncing_balls;
+      _mode[FX_MODE_SINELON]                 = &WS2812FX::mode_sinelon;
+      _mode[FX_MODE_SINELON_DUAL]            = &WS2812FX::mode_sinelon_dual;
+      _mode[FX_MODE_SINELON_RAINBOW]         = &WS2812FX::mode_sinelon_rainbow;
+      _mode[FX_MODE_POPCORN]                 = &WS2812FX::mode_popcorn;
 
       _brightness = DEFAULT_BRIGHTNESS;
       currentPalette = CRGBPalette16(CRGB::Black);
@@ -328,8 +376,6 @@ class WS2812FX {
       ablMilliampsMax = 850;
       currentMilliamps = 0;
       timebase = 0;
-      _locked = nullptr;
-      _modeUsesLock = false;
       bus = new NeoPixelWrapper();
       resetSegments();
     }
@@ -346,13 +392,8 @@ class WS2812FX {
       driverModeCronixie(bool b),
       setCronixieDigits(byte* d),
       setCronixieBacklight(bool b),
-      setIndividual(uint16_t i, uint32_t col),
       setRange(uint16_t i, uint16_t i2, uint32_t col),
-      lock(uint16_t i),
+      setShowCallback(show_callback cb),
-      lockRange(uint16_t i, uint16_t i2),
-      unlock(uint16_t i),
-      unlockRange(uint16_t i, uint16_t i2),
-      unlockAll(void),
       setTransitionMode(bool t),
       trigger(void),
       setSegment(uint8_t n, uint16_t start, uint16_t length, uint8_t group, uint8_t spacing),
@@ -502,7 +543,17 @@ class WS2812FX {
       mode_static_pattern(void),
 	    mode_tri_static_pattern(void),
       mode_spots(void),
-      mode_spots_fade(void);
+      mode_spots_fade(void),
+      mode_glitter(void),
+      mode_candle(void),
+      mode_starburst(void),
+      mode_exploding_fireworks(void),
+      mode_bouncing_balls(void),
+      mode_sinelon(void),
+      mode_sinelon_dual(void),
+      mode_sinelon_rainbow(void),
+      mode_popcorn(void);
+      
 
   private:
     NeoPixelWrapper *bus;
@@ -516,24 +567,24 @@ class WS2812FX {
     uint16_t _length;
     uint16_t _rand16seed;
     uint8_t _brightness;
+    static uint16_t _usedSegmentData;
 
     void handle_palette(void);
     void fill(uint32_t);
-    bool modeUsesLock(uint8_t);
 
     bool
-      _modeUsesLock,
       _rgbwMode,
       _cronixieMode,
       _cronixieBacklightEnabled,
       _skipFirstMode,
       _triggered;
 
-    byte* _locked;
     byte _cronixieDigits[6];
 
     mode_ptr _mode[MODE_COUNT]; // SRAM footprint: 4 bytes per element
 
+    show_callback _callback = nullptr;
+
     // mode helper functions
     uint16_t
       blink(uint32_t, uint32_t, bool strobe, bool),
@@ -541,6 +592,8 @@ class WS2812FX {
       scan(bool),
       theater_chase(uint32_t, uint32_t, bool),
       running_base(bool),
+      larson_scanner(bool),
+      sinelon_base(bool,bool),
       dissolve(uint32_t),
       chase(uint32_t, uint32_t, uint32_t, bool),
       gradient_base(bool),
@@ -561,7 +614,9 @@ class WS2812FX {
       // start, stop, length, speed, intensity, palette, mode, options, group, spacing, opacity (unused), color[]
       { 0, 7, 7, DEFAULT_SPEED, 128, 0, DEFAULT_MODE, NO_OPTIONS, 1, 0, 255, {DEFAULT_COLOR}}
     };
-    segment_runtime _segment_runtimes[MAX_NUM_SEGMENTS]; // SRAM footprint: 16 bytes per element
+
+    segment_runtime _segment_runtimes[MAX_NUM_SEGMENTS]; // SRAM footprint: 28 bytes per element
+    friend class Segment_runtime;
   
     uint16_t realPixelIndex(uint16_t i);
 };
@@ -570,14 +625,15 @@ class WS2812FX {
 //10 names per line
 const char JSON_mode_names[] PROGMEM = R"=====([
 "Solid","Blink","Breathe","Wipe","Wipe Random","Random Colors","Sweep","Dynamic","Colorloop","Rainbow",
-"Scan","Dual Scan","Fade","Theater","Theater Rainbow","Running","Saw","Twinkle","Dissolve","Dissolve Rnd",
+"Scan","Scan Dual","Fade","Theater","Theater Rainbow","Running","Saw","Twinkle","Dissolve","Dissolve Rnd",
-"Sparkle","Dark Sparkle","Sparkle+","Strobe","Strobe Rainbow","Mega Strobe","Blink Rainbow","Android","Chase","Chase Random",
+"Sparkle","Sparkle Dark","Sparkle+","Strobe","Strobe Rainbow","Strobe Mega","Blink Rainbow","Android","Chase","Chase Random",
 "Chase Rainbow","Chase Flash","Chase Flash Rnd","Rainbow Runner","Colorful","Traffic Light","Sweep Random","Running 2","Red & Blue","Stream",
 "Scanner","Lighthouse","Fireworks","Rain","Merry Christmas","Fire Flicker","Gradient","Loading","Police","Police All",
 "Two Dots","Two Areas","Circus","Halloween","Tri Chase","Tri Wipe","Tri Fade","Lightning","ICU","Multi Comet",
-"Dual Scanner","Stream 2","Oscillate","Pride 2015","Juggle","Palette","Fire 2012","Colorwaves","Bpm","Fill Noise",
+"Scanner Dual","Stream 2","Oscillate","Pride 2015","Juggle","Palette","Fire 2012","Colorwaves","Bpm","Fill Noise",
-"Noise 1","Noise 2","Noise 3","Noise 4","Colortwinkles","Lake","Meteor","Smooth Meteor","Railway","Ripple",
+"Noise 1","Noise 2","Noise 3","Noise 4","Colortwinkles","Lake","Meteor","Meteor Smooth","Railway","Ripple",
-"Twinklefox","Twinklecat","Halloween Eyes","Solid Pattern","Solid Pattern Tri","Spots","Spots Fade"
+"Twinklefox","Twinklecat","Halloween Eyes","Solid Pattern","Solid Pattern Tri","Spots","Spots Fade","Glitter","Candle","Fireworks Starburst",
+"Fireworks 1D","Bouncing Balls","Sinelon","Sinelon Dual","Sinelon Rainbow","Popcorn"
 ])=====";
 
 
@@ -586,7 +642,8 @@ const char JSON_palette_names[] PROGMEM = R"=====([
 "Forest","Rainbow","Rainbow Bands","Sunset","Rivendell","Breeze","Red & Blue","Yellowout","Analogous","Splash",
 "Pastel","Sunset 2","Beech","Vintage","Departure","Landscape","Beach","Sherbet","Hult","Hult 64",
 "Drywet","Jul","Grintage","Rewhi","Tertiary","Fire","Icefire","Cyane","Light Pink","Autumn",
-"Magenta","Magred","Yelmag","Yelblu","Orange & Teal","Tiamat","April Night","Orangery","C9","Sakura"
+"Magenta","Magred","Yelmag","Yelblu","Orange & Teal","Tiamat","April Night","Orangery","C9","Sakura",
+"Aurora"
 ])=====";
 
 #endif

wled00/FX_fcn.cpp

@@ -32,7 +32,7 @@
 
 void WS2812FX::init(bool supportWhite, uint16_t countPixels, uint8_t group, uint8_t spacing, bool skipFirst)
 {
-  if (supportWhite == _rgbwMode && countPixels == _length && _locked != NULL && group == _group && spacing == _spacing) return;
+  if (supportWhite == _rgbwMode && countPixels == _length && disableNLeds == _disableNLeds) return;
   RESET_RUNTIME;
   _rgbwMode = supportWhite;
   _skipFirstMode = skipFirst;
@@ -46,16 +46,13 @@ void WS2812FX::init(bool supportWhite, uint16_t countPixels, uint8_t group, uint
 
   bus->Begin((NeoPixelType)ty, lengthRaw);
   
-  delete[] _locked;
-  _locked = new byte[_length];
-  
   _segments[0].start = 0;
+
   _segments[0].group = _group;
   _segments[0].spacing = _spacing;
   _segments[0].stop = getUsableCount();
   _segments[0].rawLength = _length;
 
-  unlockAll();
   setBrightness(_brightness);
 }
 
@@ -91,14 +88,6 @@ void WS2812FX::service() {
   _triggered = false;
 }
 
-bool WS2812FX::modeUsesLock(uint8_t m)
-{
-  if (m == FX_MODE_FIRE_2012 || m == FX_MODE_COLORTWINKLE  ||
-      m == FX_MODE_METEOR    || m == FX_MODE_METEOR_SMOOTH || 
-      m == FX_MODE_RIPPLE    || m == FX_MODE_DYNAMIC ) return true;
-  return false;
-}
-
 void WS2812FX::setPixelColor(uint16_t n, uint32_t c) {
   uint8_t w = (c >> 24);
   uint8_t r = (c >> 16);
@@ -124,10 +113,10 @@ uint16_t WS2812FX::realPixelIndex(uint16_t i) {
 
 void WS2812FX::setPixelColor(uint16_t i, byte r, byte g, byte b, byte w)
 {
-  if (_locked[i] && !_modeUsesLock) return;
 
   RgbwColor color;
   color.W = w;
+
   switch (colorOrder) //0 = Grb, default
   {
     case 0: color.G = g; color.R = r; color.B = b; break; // 0 = GRB
@@ -218,6 +207,8 @@ void WS2812FX::setCronixieDigits(byte d[])
                               //you can set it to 0 if the ESP is powered by USB and the LEDs by external
 
 void WS2812FX::show(void) {
+  if (_callback) _callback();
+  
   //power limit calculation
   //each LED can draw up 195075 "power units" (approx. 53mA)
   //one PU is the power it takes to have 1 channel 1 step brighter per brightness step
@@ -283,7 +274,6 @@ void WS2812FX::trigger() {
 void WS2812FX::setMode(uint8_t segid, uint8_t m) {
   if (segid >= MAX_NUM_SEGMENTS) return;
    
-  bool anyUsedLock = _modeUsesLock, anyUseLock = false;
   if (m >= MODE_COUNT) m = MODE_COUNT - 1;
 
   if (_segments[segid].mode != m) 
@@ -291,13 +281,6 @@ void WS2812FX::setMode(uint8_t segid, uint8_t m) {
     _segment_runtimes[segid].reset();
     _segments[segid].mode = m;
   }
-
-  for (uint8_t i = 0; i < MAX_NUM_SEGMENTS; i++)
-  {
-    if (modeUsesLock(_segments[i].mode)) anyUseLock = true;
-  }
-  if (anyUsedLock && !anyUseLock) unlockAll();
-  _modeUsesLock = anyUseLock;
 }
 
 uint8_t WS2812FX::getModeCount()
@@ -457,13 +440,9 @@ uint32_t WS2812FX::getLastShow(void) {
 void WS2812FX::setSegment(uint8_t n, uint16_t start, uint16_t length, uint8_t group, uint8_t spacing) {
   if (n >= MAX_NUM_SEGMENTS) return;
   Segment& seg = _segments[n];
+
   if (seg.start == start && seg.rawLength == length && seg.group == group && seg.spacing == spacing) return;
-  if (seg.isActive() && modeUsesLock(seg.mode))
+
-  {
-    _modeUsesLock = false;
-    unlockRange(seg.start, seg.stop);
-    _modeUsesLock = true;
-  }
   _segment_index = n; fill(0); //turn old segment range off
 
   seg.rawLength = min(_length - start, length);
@@ -482,7 +461,7 @@ void WS2812FX::setSegment(uint8_t n, uint16_t start, uint16_t length, uint8_t gr
 
 void WS2812FX::resetSegments() {
   memset(_segments, 0, sizeof(_segments));
-  memset(_segment_runtimes, 0, sizeof(_segment_runtimes));
+  //memset(_segment_runtimes, 0, sizeof(_segment_runtimes));
   _segment_index = 0;
   _segments[0].mode = DEFAULT_MODE;
   _segments[0].colors[0] = DEFAULT_COLOR;
@@ -491,65 +470,32 @@ void WS2812FX::resetSegments() {
   _segments[0].stop = getUsableCount();
   _segments[0].rawLength = _length;
   _segments[0].setOption(0, 1); //select
+
   _segments[0].group = _group;
   _segments[0].spacing = _spacing;
-}
 
-void WS2812FX::setIndividual(uint16_t i, uint32_t col)
+  for (uint16_t i = 1; i < MAX_NUM_SEGMENTS; i++)
-{
-  if (modeUsesLock(SEGMENT.mode)) return;
-  if (i >= 0 && i < _length)
   {
-    _locked[i] = false;
+    _segments[i].colors[0] = color_wheel(i*51);
-    setPixelColor(i, col);
+    _segment_runtimes[i].reset();
-    _locked[i] = true;
   }
+  _segment_runtimes[0].reset();
 }
 
 void WS2812FX::setRange(uint16_t i, uint16_t i2, uint32_t col)
 {
   if (i2 >= i)
   {
-    for (uint16_t x = i; x <= i2; x++) setIndividual(x,col);
+    for (uint16_t x = i; x <= i2; x++) setPixelColor(x, col);
   } else
   {
-    for (uint16_t x = i2; x <= i; x++) setIndividual(x,col);
+    for (uint16_t x = i2; x <= i; x++) setPixelColor(x, col);
   }
 }
 
-void WS2812FX::lock(uint16_t i)
+void WS2812FX::setShowCallback(show_callback cb)
 {
-  if (_modeUsesLock) return;
+  _callback = cb;
-  if (i < _length) _locked[i] = true;
-}
-
-void WS2812FX::lockRange(uint16_t i, uint16_t i2)
-{
-  if (_modeUsesLock) return;
-  for (uint16_t x = i; x < i2; x++)
-  {
-    if (x < _length) _locked[i] = true;
-  }
-}
-
-void WS2812FX::unlock(uint16_t i)
-{
-  if (_modeUsesLock) return;
-  if (i < _length) _locked[i] = false;
-}
-
-void WS2812FX::unlockRange(uint16_t i, uint16_t i2)
-{
-  if (_modeUsesLock) return;
-  for (uint16_t x = i; x < i2; x++)
-  {
-    if (x < _length) _locked[x] = false;
-  }
-}
-
-void WS2812FX::unlockAll()
-{
-  for (int i=0; i < _length; i++) _locked[i] = false;
 }
 
 void WS2812FX::setTransitionMode(bool t)
@@ -723,7 +669,8 @@ void WS2812FX::handle_palette(void)
   _segment_index_palette_last = _segment_index;
 
   byte paletteIndex = SEGMENT.palette;
-  if ((SEGMENT.mode >= FX_MODE_METEOR) && SEGMENT.palette == 0) paletteIndex = 4;
+  if (SEGMENT.mode == FX_MODE_GLITTER && paletteIndex == 0) paletteIndex = 11;
+  if (SEGMENT.mode >= FX_MODE_METEOR && paletteIndex == 0) paletteIndex = 4;
   
   switch (paletteIndex)
   {
@@ -737,6 +684,7 @@ void WS2812FX::handle_palette(void)
         case FX_MODE_NOISE16_2  : targetPalette = gGradientPalettes[30]; break;//Blue cyan yellow
         case FX_MODE_NOISE16_3  : targetPalette = gGradientPalettes[22]; break;//heat palette
         case FX_MODE_NOISE16_4  : targetPalette = gGradientPalettes[13]; break;//landscape 33
+        //case FX_MODE_GLITTER    : targetPalette = RainbowColors_p;       break;
         
         default: targetPalette = PartyColors_p; break;//palette, bpm
       }
@@ -775,7 +723,8 @@ void WS2812FX::handle_palette(void)
     case 5: {//based on primary + secondary
       CRGB prim = col_to_crgb(SEGCOLOR(0));
       CRGB sec  = col_to_crgb(SEGCOLOR(1));
-      targetPalette = CRGBPalette16(sec,prim,CRGB::White); break;}
+      CRGB ter  = col_to_crgb(SEGCOLOR(2));
+      targetPalette = CRGBPalette16(ter,sec,prim); break;}
     case 6: //Party colors
       targetPalette = PartyColors_p; break;
     case 7: //Cloud colors
@@ -867,3 +816,5 @@ uint32_t WS2812FX::gamma32(uint32_t color)
   b = gammaT[b];
   return ((w << 24) | (r << 16) | (g << 8) | (b));
 }
+
+uint16_t WS2812FX::_usedSegmentData = 0;

wled00/NpbWrapper.h

@@ -5,12 +5,18 @@
 //PIN CONFIGURATION
 #define LEDPIN 2     //strip pin. Any for ESP32, gpio2 or 3 is recommended for ESP8266 (gpio2/3 are labeled D4/RX on NodeMCU and Wemos)
 //#define USE_APA102 // Uncomment for using APA102 LEDs.
-#define BTNPIN 0     //button pin. Needs to have pullup (gpio0 recommended)
+//#define WLED_USE_ANALOG_LEDS //Uncomment for using "dumb" PWM controlled LEDs (see pins below, default R: gpio5, G: 12, B: 15, W: 13)
-#define IR_PIN 4     //infrared pin (-1 to disable)
+//#define WLED_USE_H801 //H801 controller. Please uncomment #define WLED_USE_ANALOG_LEDS as well
-#define RLYPIN 12    //pin for relay, will be set HIGH if LEDs are on (-1 to disable). Also usable for standby leds, triggers,...
+//#define WLED_USE_5CH  //5 Channel H801 for cold and warm white
-#define AUXPIN -1    //debug auxiliary output pin (-1 to disable)
 
-#define RLYMDE 1     //mode for relay, 0: LOW if LEDs are on 1: HIGH if LEDs are on
+#define BTNPIN  0  //button pin. Needs to have pullup (gpio0 recommended)
+#define IR_PIN  4  //infrared pin (-1 to disable)  MagicHome: 4, H801 Wifi: 0
+#define RLYPIN 12  //pin for relay, will be set HIGH if LEDs are on (-1 to disable). Also usable for standby leds, triggers,...
+#define AUXPIN -1  //debug auxiliary output pin (-1 to disable)
+
+#define RLYMDE 1  //mode for relay, 0: LOW if LEDs are on 1: HIGH if LEDs are on
+
+//END CONFIGURATION
 
 #ifdef USE_APA102
  #define CLKPIN 0
@@ -20,6 +26,27 @@
  #endif
 #endif
 
+#ifdef WLED_USE_ANALOG_LEDS
+  //PWM pins - PINs 15,13,12,14 (W2 = 04)are used with H801 Wifi LED Controller
+  #ifdef WLED_USE_H801
+    #define RPIN 15   //R pin for analog LED strip   
+    #define GPIN 13   //G pin for analog LED strip
+    #define BPIN 12   //B pin for analog LED strip
+    #define WPIN 14   //W pin for analog LED strip (W1: 14, W2: 04)
+    #define W2PIN 04  //W2 pin for analog LED strip
+    #undef BTNPIN
+    #undef IR_PIN
+    #define IR_PIN  0 //infrared pin (-1 to disable)  MagicHome: 4, H801 Wifi: 0
+  #else
+  //PWM pins - PINs 5,12,13,15 are used with Magic Home LED Controller
+    #define RPIN 5   //R pin for analog LED strip   
+    #define GPIN 12   //G pin for analog LED strip
+    #define BPIN 15   //B pin for analog LED strip
+    #define WPIN 13   //W pin for analog LED strip (W1: 14, W2: 04)
+  #endif
+  #undef RLYPIN
+  #define RLYPIN -1 //disable as pin 12 is used by analog LEDs
+#endif
 
 //automatically uses the right driver method for each platform
 #ifdef ARDUINO_ARCH_ESP32
@@ -103,41 +130,94 @@ public:
         _pGrbw = new NeoPixelBrightnessBus<PIXELFEATURE4,PIXELMETHOD>(countPixels, LEDPIN);
       #endif
         _pGrbw->Begin();
+      
+      #ifdef WLED_USE_ANALOG_LEDS
+        pinMode(WPIN, OUTPUT); 
+        #ifdef WLED_USE_5CH_LEDS
+          pinMode(W2PIN, OUTPUT);
+        #endif
+      #endif
+        
       break;
     }
+
+    #ifdef WLED_USE_ANALOG_LEDS   
+      //init PWM pins - PINs 5,12,13,15 are used with Magic Home LED Controller
+      pinMode(RPIN, OUTPUT);
+      pinMode(GPIN, OUTPUT);
+      pinMode(BPIN, OUTPUT);   
+      analogWriteRange(255);  //same range as one RGB channel
+      analogWriteFreq(880);   //PWM frequency proven as good for LEDs
+    #endif
   }
 
+#ifdef WLED_USE_ANALOG_LEDS      
+    void SetRgbwPwm(uint8_t r, uint8_t g, uint8_t b, uint8_t w, uint8_t w2=0)
+    {
+      analogWrite(RPIN, r);
+      analogWrite(GPIN, g);
+      analogWrite(BPIN, b);
+      switch (_type) {
+        case NeoPixelType_Grb:                                                  break;
+        #ifdef WLED_USE_5CH_LEDS
+          case NeoPixelType_Grbw: analogWrite(WPIN, w); analogWrite(W2PIN, w2); break;
+        #else
+          case NeoPixelType_Grbw: analogWrite(WPIN, w);                         break;
+        #endif
+      }
+    }
+#endif
+
   void Show()
   {
+    byte b;
     switch (_type)
     {
-      case NeoPixelType_Grb:  _pGrb->Show();   break;
+      case NeoPixelType_Grb:  _pGrb->Show();  break;
-      case NeoPixelType_Grbw: _pGrbw->Show();  break;
+      case NeoPixelType_Grbw: _pGrbw->Show(); break;
-    }
-  }
-  
-  bool CanShow() const
-  {
-    switch (_type) {
-      case NeoPixelType_Grb:  _pGrb->CanShow();  break;
-      case NeoPixelType_Grbw: _pGrbw->CanShow(); break;
-    }
-  }
-
-  void SetPixelColor(uint16_t indexPixel, RgbColor color)
-  {
-    switch (_type) {
-      case NeoPixelType_Grb: _pGrb->SetPixelColor(indexPixel, color);   break;
-      case NeoPixelType_Grbw:_pGrbw->SetPixelColor(indexPixel, color);  break;
     }
   }
 
   void SetPixelColor(uint16_t indexPixel, RgbwColor color)
   {
     switch (_type) {
-      case NeoPixelType_Grb:  _pGrb->SetPixelColor(indexPixel, RgbColor(color.R,color.G,color.B));   break;
+      case NeoPixelType_Grb: {
-      case NeoPixelType_Grbw: _pGrbw->SetPixelColor(indexPixel, color);   break;
+        _pGrb->SetPixelColor(indexPixel, RgbColor(color.R,color.G,color.B));
+        #ifdef WLED_USE_ANALOG_LEDS
+          if (indexPixel != 0) return; //set analog LEDs from first pixel
+          byte b = _pGrb->GetBrightness();
+          SetRgbwPwm(color.R * b / 255, color.G * b / 255, color.B * b / 255, 0);
+        #endif
+      }
+      break;
+      case NeoPixelType_Grbw: {
+        _pGrbw->SetPixelColor(indexPixel, color);
+        #ifdef WLED_USE_ANALOG_LEDS      
+          if (indexPixel != 0) return; //set analog LEDs from first pixel
+          byte b = _pGrbw->GetBrightness();
+          // check color values for Warm / Cold white mix (for RGBW)  // EsplanexaDevice.cpp
+          #ifdef WLED_USE_5CH_LEDS
+            if        (color.R == 255 & color.G == 255 && color.B == 255 && color.W == 255) {  
+              SetRgbwPwm(0, 0, 0,                  0, color.W * b / 255);
+            } else if (color.R == 127 & color.G == 127 && color.B == 127 && color.W == 255) {  
+              SetRgbwPwm(0, 0, 0, color.W * b / 512, colorW.W * b / 255);
+            } else if (color.R ==   0 & color.G ==   0 && color.B ==   0 && color.W == 255) {  
+              SetRgbwPwm(0, 0, 0, color.W * b / 255,                  0);
+            } else if (color.R == 130 & color.G ==  90 && color.B ==   0 && color.W == 255) {  
+              SetRgbwPwm(0, 0, 0, color.W * b / 255, color.W * b / 512);
+            } else if (color.R == 255 & color.G == 153 && color.B ==   0 && color.W == 255) {  
+              SetRgbwPwm(0, 0, 0, color.W * b / 255,                  0);
+            } else {  // not only white colors
+              SetRgbwPwm(color.R * b / 255, colorW.G * b / 255, colorW.B * b / 255, color.W * b / 255);
+            }
+          #else
+            SetRgbwPwm(color.R * b / 255, color.G * b / 255, color.B * b / 255, color.W * b / 255);
+          #endif         
+        #endif
+      }
+      break;
     }
+    
   }
 
   void SetBrightness(byte b)
@@ -148,15 +228,6 @@ public:
     }
   }
 
-  RgbColor GetPixelColor(uint16_t indexPixel) const
-  {
-    switch (_type) {
-      case NeoPixelType_Grb:  return _pGrb->GetPixelColor(indexPixel);     break;
-      case NeoPixelType_Grbw: /*doesn't support it so we don't return it*/ break;
-    }
-    return 0;
-  }
-
   // NOTE:  Due to feature differences, some support RGBW but the method name
   // here needs to be unique, thus GetPixeColorRgbw
   RgbwColor GetPixelColorRgbw(uint16_t indexPixel) const
@@ -168,21 +239,6 @@ public:
     return 0;
   }
 
-  void ClearTo(RgbColor color)
-  {
-    switch (_type) {
-      case NeoPixelType_Grb: _pGrb->ClearTo(color);   break;
-      case NeoPixelType_Grbw:_pGrbw->ClearTo(color);  break;
-    }
-  }
-
-  void ClearTo(RgbwColor color)
-  {
-    switch (_type) {
-      case NeoPixelType_Grb:    break;
-      case NeoPixelType_Grbw:_pGrbw->ClearTo(color);  break;
-    }
-  }
 
 private:
   NeoPixelType _type;

wled00/data/liveview.htm

@@ -23,16 +23,19 @@
   <script>
     update();
     
+    var tmout = null;
     function update()
     {
       if (document.hidden) {
-        setTimeout(update, 250);
+        clearTimeout(tmout);
+        tmout = setTimeout(update, 250);
         return;
       }
       fetch('/json/live')
       .then(res => {
         if (!res.ok) {
-          setTimeout(update, 2500);
+          clearTimeout(tmout);
+          tmout = setTimeout(update, 2500);
         }
         return res.json();
       })
@@ -47,10 +50,12 @@
         }
         str += ")";
         document.getElementById("canv").style.background = str;
-        setTimeout(update, 40);
+        clearTimeout(tmout);
+        tmout = setTimeout(update, 40);
       })
       .catch(function (error) {
-        setTimeout(update, 2500);
+        clearTimeout(tmout);
+        tmout = setTimeout(update, 2500);
       })
 
     }

wled00/data/settings_sec.htm

@@ -88,7 +88,7 @@
 		<button type="button" onclick="U()">Manual OTA Update</button><br>
 		Enable ArduinoOTA: <input type="checkbox" name="AO"><br>
 		<h3>About</h3>
-		<a href="https://github.com/Aircoookie/WLED" target="_blank">WLED</a> version 0.8.4<br><br>
+		<a href="https://github.com/Aircoookie/WLED" target="_blank">WLED</a> version 0.9.0<br><br>
 		<a href="https://github.com/Aircoookie/WLED/wiki/Contributors-&-About" target="_blank">Contributors, dependencies and special thanks</a><br>
 		A huge thank you to everyone who helped me create WLED!<br><br>
 		(c) 2016-2019 Christian Schwinne <br>

wled00/data/settings_sync.htm

@@ -103,6 +103,30 @@
 		Device Auth token: <input name="BK" maxlength="33"><br>
 		<i>Clear the token field to disable. </i><a href="https://github.com/Aircoookie/WLED/wiki/Blynk" target="_blank">Setup info</a>
 		<h3>MQTT</h3>
+    Enable MQTT: <input type="checkbox" name="MQ"><br>
 		Broker: <input name="MS" maxlength="32"><br>
-	唉敳湲浡㩥㰠湩異⁴慮敭∽免呔单剅•慭汸湥瑧㵨㌢∲㰾牢ਾऀऀ慐獳潷摲›椼灮瑵琠灹㵥瀢獡睳牯≤椠灮瑵渠浡㵥䴢呑偔十≓洠硡敬杮桴∽㈳㸢戼㹲
+		Username: <input name="MQTTUSER" maxlength="32"><br>
-	䌉楬湥⁴䑉›椼灮瑵渠浡㵥䴢呑䍔䑉•慭汸湥瑧㵨㌢∲㰾牢ਾऀऀ䐀攀瘀椀挀攀 吀漀瀀椀挀㨀 㰀椀渀瀀甀琀 渀愀洀攀㴀∀䴀䐀∀ 洀愀砀氀攀渀最琀栀㴀∀㌀㈀∀㸀㰀戀爀㸀ഀ਀ऀऀ䜀爀漀甀瀀 吀漀瀀椀挀㨀 㰀椀渀瀀甀琀 渀愀洀攀㴀∀䴀䜀∀ 洀愀砀氀攀渀最琀栀㴀∀㌀㈀∀㸀㰀戀爀㸀ഀ਀ऀऀ㰀愀 栀爀攀昀㴀∀栀琀琀瀀猀㨀⼀⼀最椀琀栀甀戀⸀挀漀洀⼀䄀椀爀挀漀漀漀欀椀攀⼀圀䰀䔀䐀⼀眀椀欀椀⼀䴀儀吀吀∀ 琀愀爀最攀琀㴀∀开戀氀愀渀欀∀㸀䴀儀吀吀 椀渀昀漀㰀⼀愀㸀ഀ਀ऀऀ㰀栀㌀㸀倀栀椀氀椀瀀猀 䠀甀攀㰀⼀栀㌀㸀ഀ਀ऀऀ㰀椀㸀夀漀甀 挀愀渀 昀椀渀搀 琀栀攀 戀爀椀搀最攀 䤀倀 愀渀搀 琀栀攀 氀椀最栀琀 渀甀洀戀攀爀 椀渀 琀栀攀 ✀䄀戀漀甀琀✀ 猀攀挀琀椀漀渀 漀昀 琀栀攀 栀甀攀 愀瀀瀀⸀㰀⼀椀㸀㰀戀爀㸀ഀ਀ऀऀ倀漀氀氀 䠀甀攀 氀椀最栀琀 㰀椀渀瀀甀琀 渀愀洀攀㴀∀䠀䰀∀ 琀礀瀀攀㴀∀渀甀洀戀攀爀∀ 洀椀渀㴀∀㄀∀ 洀愀砀㴀∀㤀㤀∀ 爀攀焀甀椀爀攀搀㸀 攀瘀攀爀礀 㰀椀渀瀀甀琀 渀愀洀攀㴀∀䠀䤀∀ 琀礀瀀攀㴀∀渀甀洀戀攀爀∀ 洀椀渀㴀∀㄀　　∀ 洀愀砀㴀∀㘀㔀　　　∀ 爀攀焀甀椀爀攀搀㸀 洀猀㨀 㰀椀渀瀀甀琀 琀礀瀀攀㴀∀挀栀攀挀欀戀漀砀∀ 渀愀洀攀㴀∀䠀倀∀㸀㰀戀爀㸀ഀ਀ऀऀ吀栀攀渀Ⰰ 爀攀挀攀椀瘀攀 㰀椀渀瀀甀琀 琀礀瀀攀㴀∀挀栀攀挀欀戀漀砀∀ 渀愀洀攀㴀∀䠀伀∀㸀 伀渀⼀伀昀昀Ⰰ 㰀椀渀瀀甀琀 琀礀瀀攀㴀∀挀栀攀挀欀戀漀砀∀ 渀愀洀攀㴀∀䠀䈀∀㸀 䈀爀椀最栀琀渀攀猀猀Ⰰ 愀渀搀 㰀椀渀瀀甀琀 琀礀瀀攀㴀∀挀栀攀挀欀戀漀砀∀ 渀愀洀攀㴀∀䠀䌀∀㸀 䌀漀氀漀爀㰀戀爀㸀ഀ਀ऀऀ䠀甀攀 䈀爀椀搀最攀 䤀倀㨀㰀戀爀㸀ഀ਀ऀऀ㰀椀渀瀀甀琀 渀愀洀攀㴀∀䠀　∀ 琀礀瀀攀㴀∀渀甀洀戀攀爀∀ 洀椀渀㴀∀　∀ 洀愀砀㴀∀㈀㔀㔀∀ 爀攀焀甀椀爀攀搀㸀 ⸀ഀ਀ऀऀ㰀椀渀瀀甀琀 渀愀洀攀㴀∀䠀㄀∀ 琀礀瀀攀㴀∀渀甀洀戀攀爀∀ 洀椀渀㴀∀　∀ 洀愀砀㴀∀㈀㔀㔀∀ 爀攀焀甀椀爀攀搀㸀 ⸀ഀ਀ऀऀ㰀椀渀瀀甀琀 渀愀洀攀㴀∀䠀㈀∀ 琀礀瀀攀㴀∀渀甀洀戀攀爀∀ 洀椀渀㴀∀　∀ 洀愀砀㴀∀㈀㔀㔀∀ 爀攀焀甀椀爀攀搀㸀 ⸀ഀ਀ऀऀ㰀椀渀瀀甀琀 渀愀洀攀㴀∀䠀㌀∀ 琀礀瀀攀㴀∀渀甀洀戀攀爀∀ 洀椀渀㴀∀　∀ 洀愀砀㴀∀㈀㔀㔀∀ 爀攀焀甀椀爀攀搀㸀㰀戀爀㸀ഀ਀ऀऀ㰀戀㸀倀爀攀猀猀 琀栀攀 瀀甀猀栀氀椀渀欀 戀甀琀琀漀渀 漀渀 琀栀攀 戀爀椀搀最攀Ⰰ 愀昀琀攀爀 琀栀愀琀 猀愀瘀攀 琀栀椀猀 瀀愀最攀℀㰀⼀戀㸀㰀戀爀㸀ഀ਀ऀऀ⠀眀栀攀渀 昀椀爀猀琀 挀漀渀渀攀挀琀椀渀最⤀㰀戀爀㸀ഀ਀ऀऀ㰀℀ⴀⴀ唀瀀搀愀琀攀 䠀甀攀 最爀漀甀瀀 㰀椀渀瀀甀琀 渀愀洀攀㴀∀䠀唀䔀䜀刀∀ 琀礀瀀攀㴀∀渀甀洀戀攀爀∀ 洀椀渀㴀∀　∀ 洀愀砀㴀∀㤀㤀∀ 爀攀焀甀椀爀攀搀㸀 㰀戀爀㸀ഀ਀ऀऀ匀攀渀搀 㰀椀渀瀀甀琀 琀礀瀀攀㴀∀挀栀攀挀欀戀漀砀∀ 渀愀洀攀㴀∀䠀唀䔀䤀伀∀㸀 伀渀⼀伀昀昀Ⰰ 㰀椀渀瀀甀琀 琀礀瀀攀㴀∀挀栀攀挀欀戀漀砀∀ 渀愀洀攀㴀∀䠀唀䔀䈀刀∀㸀 䈀爀椀最栀琀渀攀猀猀Ⰰ 愀渀搀 㰀椀渀瀀甀琀 琀礀瀀攀㴀∀挀栀攀挀欀戀漀砀∀ 渀愀洀攀㴀∀䠀唀䔀䌀䰀∀㸀 䌀漀氀漀爀㰀戀爀㸀ⴀⴀ㸀ഀ਀ऀऀ㰀℀ⴀⴀ䄀昀琀攀爀 搀攀瘀椀挀攀 挀漀氀漀爀 甀瀀搀愀琀攀Ⰰ 椀最渀漀爀攀 䠀甀攀 甀瀀搀愀琀攀猀 昀漀爀 㰀椀渀瀀甀琀 渀愀洀攀㴀∀䠀唀䔀䰀䤀∀ 琀礀瀀攀㴀∀渀甀洀戀攀爀∀ 洀椀渀㴀∀　∀ 洀愀砀㴀∀㈀㔀㔀∀ 爀攀焀甀椀爀攀搀㸀 洀椀渀甀琀攀猀㰀戀爀㸀ⴀⴀ㸀ഀ਀ऀऀ䠀甀攀 猀琀愀琀甀猀㨀 㰀猀瀀愀渀 挀氀愀猀猀㴀∀栀洀猀∀㸀 䤀渀琀攀爀渀愀氀 䔀匀倀 䔀爀爀漀爀℀ 㰀⼀猀瀀愀渀㸀㰀栀爀㸀ഀ਀ऀऀ㰀戀甀琀琀漀渀 琀礀瀀攀㴀∀戀甀琀琀漀渀∀ 漀渀挀氀椀挀欀㴀∀䈀⠀⤀∀㸀䈀愀挀欀㰀⼀戀甀琀琀漀渀㸀㰀戀甀琀琀漀渀 琀礀瀀攀㴀∀猀甀戀洀椀琀∀㸀匀愀瘀攀㰀⼀戀甀琀琀漀渀㸀ഀ਀ऀ㰀⼀昀漀爀洀㸀ഀ਀㰀⼀戀漀搀礀㸀ഀ਀㰀⼀栀琀洀氀㸀਀
+		Password: <input type="password" input name="MQTTPASS" maxlength="32"><br>
+		Client ID: <input name="MQTTCID" maxlength="32"><br>
+		Device Topic: <input name="MD" maxlength="32"><br>
+		Group Topic: <input name="MG" maxlength="32"><br>
+		<a href="https://github.com/Aircoookie/WLED/wiki/MQTT" target="_blank">MQTT info</a>
+		<h3>Philips Hue</h3>
+		<i>You can find the bridge IP and the light number in the 'About' section of the hue app.</i><br>
+		Poll Hue light <input name="HL" type="number" min="1" max="99" required> every <input name="HI" type="number" min="100" max="65000" required> ms: <input type="checkbox" name="HP"><br>
+		Then, receive <input type="checkbox" name="HO"> On/Off, <input type="checkbox" name="HB"> Brightness, and <input type="checkbox" name="HC"> Color<br>
+		Hue Bridge IP:<br>
+		<input name="H0" type="number" min="0" max="255" required> .
+		<input name="H1" type="number" min="0" max="255" required> .
+		<input name="H2" type="number" min="0" max="255" required> .
+		<input name="H3" type="number" min="0" max="255" required><br>
+		<b>Press the pushlink button on the bridge, after that save this page!</b><br>
+		(when first connecting)<br>
+		<!--Update Hue group <input name="HUEGR" type="number" min="0" max="99" required> <br>
+		Send <input type="checkbox" name="HUEIO"> On/Off, <input type="checkbox" name="HUEBR"> Brightness, and <input type="checkbox" name="HUECL"> Color<br>-->
+		<!--After device color update, ignore Hue updates for <input name="HUELI" type="number" min="0" max="255" required> minutes<br>-->
+		Hue status: <span class="hms"> Internal ESP Error! </span><hr>
+		<button type="button" onclick="B()">Back</button><button type="submit">Save</button>
+	</form>
+</body>
+</html>

wled00/data/settings_ui.htm

@@ -98,7 +98,8 @@
 		<div class="helpB"><button type="button" onclick="H()">?</button></div>
 		<button type="button" onclick="B()">Back</button><button type="submit">Save</button><hr>
 		<h2>Web Setup</h2>
-		Server description: <input name="DS" maxlength="32"><br><br>
+		Server description: <input name="DS" maxlength="32"><br>
+    Sync button toggles both send and receive: <input type="checkbox" name="ST"><br><br>
 		<hr><button type="button" onclick="B()">Back</button><button type="submit">Save</button>
 	</form>
 </body>

wled00/html_other.h

@@ -20,7 +20,7 @@ const char PAGE_msg[] PROGMEM = R"=====(<!DOCTYPE html>
 const char PAGE_update[] PROGMEM = R"=====(<!DOCTYPE html>
 <html><head><meta content='width=device-width' name='viewport'><title>WLED Update</title><script>function B(){window.history.back()}</script>
 <style>.bt{background:#333;color:#fff;font-family:Verdana,sans-serif;border:.3ch solid #333;display:inline-block;font-size:20px;margin:8px;margin-top:12px}input[type=file]{font-size:16px}body{font-family:Verdana,sans-serif;text-align:center;background:#222;color:#fff;line-height:200%}</style></head>
-<body><h2>WLED Software Update</h2>Installed version: 0.9.0-dev<br>Download the latest binary: <a href="https://github.com/Aircoookie/WLED/releases"><img src="https://img.shields.io/github/release/Aircoookie/WLED.svg?style=flat-square"></a><br><form method='POST' action='/update' enctype='multipart/form-data'><input type='file' class="bt" name='update' required><br><input type='submit' class="bt" value='Update!'></form><button type="button" class="bt" onclick="B()">Back</button></body></html>)=====";
+<body><h2>WLED Software Update</h2>Installed version: 0.9.0-b1<br>Download the latest binary: <a href="https://github.com/Aircoookie/WLED/releases"><img src="https://img.shields.io/github/release/Aircoookie/WLED.svg?style=flat-square"></a><br><form method='POST' action='/update' enctype='multipart/form-data'><input type='file' class="bt" name='update' required><br><input type='submit' class="bt" value='Update!'></form><button type="button" class="bt" onclick="B()">Back</button></body></html>)=====";
 
 
 //new user welcome page
@@ -36,14 +36,50 @@ const char PAGE_liveview[] PROGMEM = R"=====(<!DOCTYPE html>
 <meta charset=utf-8>
 <meta name=theme-color content=#222222>
 <title>WLED Live Preview</title>
-<style>body{margin:0}#canv{background:black;filter:brightness(175%);width:100%;height:100%;position:absolute}</style>
+<style>
-</head>
+body {margin: 0;}
-<body><div id=canv />
+#canv {background: black;filter: brightness(175%);width: 100%;height: 100%;position: absolute;}
-<script>update();function update()
+</style></head>
-{if(document.hidden){setTimeout(update,250);return;}
+<body>
-fetch('/json/live').then(res=>{if(!res.ok){setTimeout(update,2500);}
+<div id="canv" />
-return res.json();}).then(json=>{var str="linear-gradient(90deg,";var len=json.leds.length;for(i=0;i<len;i++){var leddata=json.leds[i];if(leddata.length>6)leddata=leddata.substring(2);str+="#"+leddata;if(i<len-1)str+=","}
+<script>
-str+=")";document.getElementById("canv").style.background=str;setTimeout(update,40);}).catch(function(error){setTimeout(update,2500);})}</script>
+update();
+var tmout = null;
+function update()
+{
+if (document.hidden) {
+clearTimeout(tmout);
+tmout = setTimeout(update, 250);
+return;
+}
+fetch('/json/live')
+.then(res => {
+if (!res.ok) {
+clearTimeout(tmout);
+tmout = setTimeout(update, 2500);
+}
+return res.json();
+})
+.then(json => {
+var str = "linear-gradient(90deg,";
+var len = json.leds.length;
+for (i = 0; i < len; i++) {
+var leddata = json.leds[i];
+if (leddata.length > 6) leddata = leddata.substring(2);
+str += "#" + leddata;
+if (i < len -1) str += ","
+}
+str += ")";
+document.getElementById("canv").style.background = str;
+clearTimeout(tmout);
+tmout = setTimeout(update, 40);
+})
+.catch(function (error) {
+clearTimeout(tmout);
+tmout = setTimeout(update, 2500);
+})
+}
+</script>
 </body></html>)=====";
 
 

wled00/html_settings.h

@@ -121,7 +121,7 @@ Color order:
 <select name=CO>
 <option value=0>GRB</option>
 <option value=1>RGB</option>
-<option value=2 disabled>BRG</option>
+<option value=2>BRG</option>
 <option value=3>RBG</option>
 </select>
 <h3>Defaults</h3>
@@ -168,7 +168,8 @@ function gId(s){return document.getElementById(s);}function S(){GetV();Ct();}fun
 <div class="helpB"><button type="button" onclick="H()">?</button></div>
 <button type="button" onclick="B()">Back</button><button type="submit">Save</button><hr>
 <h2>Web Setup</h2>
-Server description: <input name="DS" maxlength="32"><br><br>
+Server description: <input name="DS" maxlength="32"><br>
+Sync button toggles both send and receive: <input type="checkbox" name="ST"><br><br>
 <hr><button type="button" onclick="B()">Back</button><button type="submit">Save</button>
 </form>
 </body>
@@ -219,6 +220,7 @@ For best results, only use one of these services at a time.<br>
 Device Auth token: <input name="BK" maxlength="33"><br>
 <i>Clear the token field to disable. </i><a href="https://github.com/Aircoookie/WLED/wiki/Blynk" target="_blank">Setup info</a>
 <h3>MQTT</h3>
+Enable MQTT: <input type="checkbox" name="MQ"><br>
 Broker: <input name="MS" maxlength="32">
 Port: <input name="MQPORT" type="number" min="1" max="65535" required><br>
 <b>The MQTT credentials are sent over an unsecured connection.<br>
@@ -280,6 +282,7 @@ Time zone:
 <option value="12">NZST/NZDT</option>
 <option value="13">North Korea</option>
 <option value="14">IST (India)</option>
+<option value="15">CA-Saskatchewan</option>
 </select><br>
 UTC offset: <input name="UO" type="number" min="-65500" max="65500" required> seconds (max. 18 hours)<br>
 Current local time is <span class="times">unknown</span>.
@@ -288,7 +291,7 @@ Clock Overlay:
 <select name="OL" onchange="Cs()">
 <option value="0" id="cn" selected>None</option>
 <option value="1" id="ca">Analog Clock</option>
-<option value="2">Single Digit Clock</option>
+<option value="2" disabled>-</option>
 <option value="3" id="cc">Cronixie Clock</option>
 </select><br>
 <div id="coc">
@@ -366,10 +369,10 @@ HTTP traffic is unencrypted. An attacker in the same network can intercept form
 <button type="button" onclick="U()">Manual OTA Update</button><br>
 Enable ArduinoOTA: <input type="checkbox" name="AO"><br>
 <h3>About</h3>
-<a href="https://github.com/Aircoookie/WLED" target="_blank">WLED</a> version 0.9.0-dev<br><br>
+<a href="https://github.com/Aircoookie/WLED" target="_blank">WLED</a> version 0.9.0-b2<br><br>
 <a href="https://github.com/Aircoookie/WLED/wiki/Contributors-&-About" target="_blank">Contributors, dependencies and special thanks</a><br>
 A huge thank you to everyone who helped me create WLED!<br><br>
-(c) 2016-2019 Christian Schwinne <br>
+(c) 2016-2020 Christian Schwinne <br>
 <i>Licensed under the MIT license</i><br><br>
 Server message: <span class="msg"> Response error! </span><hr>
 <button type="button" onclick="B()">Back</button><button type="submit">Save & Reboot</button>

wled00/palettes.h

@@ -565,6 +565,14 @@ DEFINE_GRADIENT_PALETTE( Sakura_gp ) {
   195, 255, 82,103,
   255, 223, 13, 17};
 
+DEFINE_GRADIENT_PALETTE( Aurora_gp ) {
+    0,   1,  5, 45, //deep blue
+   64,   0,200, 23,
+  128,   0,255,  0, //green
+  170,   0,243, 45,
+  200,   0,135,  7,
+  255,   1,  5, 45};//deep blue
+  
 
 // Single array of defined cpt-city color palettes.
 // This will let us programmatically choose one based on
@@ -614,6 +622,7 @@ const TProgmemRGBGradientPalettePtr gGradientPalettes[] = {
   Orangery_gp,                  //47-34 Orangery
   C9_gp,                        //48-35 C9
   Sakura_gp,                    //49-36 Sakura
+  Aurora_gp,                    //50-37 Aurora
 };
 
 

wled00/src/dependencies/espalexa/EspalexaDevice.cpp

@@ -110,8 +110,8 @@ uint32_t EspalexaDevice::getKelvin()
 uint32_t EspalexaDevice::getRGB()
 {
   if (_rgb != 0) return _rgb; //color has not changed
-  uint8_t rgb[3];
+  byte rgb[4]{0, 0, 0, 0}; 
-  float r, g, b;
+  float r, g, b, w;
   
   if (_mode == EspalexaColorMode::none) return 0;
 
@@ -122,6 +122,15 @@ uint32_t EspalexaDevice::getRGB()
     float temp = 10000/ _ct; //kelvins = 1,000,000/mired (and that /100)
     float r, g, b;
 
+// Cold white to warm white receiving from Alexa: _ct = 199, 234, 284, 350, 383 (from cold white to warm white)
+    switch (_ct) {
+      case 199: rgb[0]=255,rgb[1]=255,rgb[2]=255;rgb[3]=255;break;
+      case 234: rgb[0]=127,rgb[1]=127,rgb[2]=127;rgb[3]=255;break;
+      case 284: rgb[0]=0,rgb[1]=0,rgb[2]=0;rgb[3]=255;break;
+      case 350: rgb[0]=130,rgb[1]=90,rgb[2]=0;rgb[3]=255;break;
+      case 383: rgb[0]=255,rgb[1]=153,rgb[2]=0;rgb[3]=255;break;
+      default: {
+ 
     if( temp <= 66 ){ 
       r = 255; 
       g = temp;
@@ -143,6 +152,9 @@ uint32_t EspalexaDevice::getRGB()
     rgb[0] = (byte)constrain(r,0.1,255.1);
     rgb[1] = (byte)constrain(g,0.1,255.1);
     rgb[2] = (byte)constrain(b,0.1,255.1);
+
+    }
+    }
   } else if (_mode == EspalexaColorMode::hs)
   {
     float h = ((float)_hue)/65535.0;
@@ -216,7 +228,7 @@ uint32_t EspalexaDevice::getRGB()
     rgb[1] = 255.0*g;
     rgb[2] = 255.0*b;
   }
-  _rgb = ((rgb[0] << 16) | (rgb[1] << 8) | (rgb[2]));
+  _rgb = ((rgb[3] << 24) | (rgb[0] << 16) | (rgb[1] << 8) | (rgb[2]));  //white value is only >0 if Alexa did provide a CT value, RGB colors will not be touched.
   return _rgb;
 }
 

wled00/src/dependencies/json/AsyncJson-v6.h

@@ -15,7 +15,7 @@
 #include "ArduinoJson-v6.h"
 #include <Print.h>
 
-#define DYNAMYC_JSON_DOCUMENT_SIZE 8192
+#define DYNAMIC_JSON_DOCUMENT_SIZE 8192
 
 constexpr const char* JSON_MIMETYPE = "application/json";
 
@@ -60,7 +60,7 @@ class AsyncJsonResponse: public AsyncAbstractResponse {
 
   public:    
 
-    AsyncJsonResponse(size_t maxJsonBufferSize = DYNAMYC_JSON_DOCUMENT_SIZE, bool isArray=false) : _jsonBuffer(maxJsonBufferSize), _isValid{false} {
+    AsyncJsonResponse(size_t maxJsonBufferSize = DYNAMIC_JSON_DOCUMENT_SIZE, bool isArray=false) : _jsonBuffer(maxJsonBufferSize), _isValid{false} {
       _code = 200;
       _contentType = JSON_MIMETYPE;
       if(isArray)
@@ -90,7 +90,7 @@ class AsyncJsonResponse: public AsyncAbstractResponse {
     }
 };
 
-typedef std::function<void(AsyncWebServerRequest *request, JsonObject json)> ArJsonRequestHandlerFunction;
+typedef std::function<void(AsyncWebServerRequest *request)> ArJsonRequestHandlerFunction;
 
 class AsyncCallbackJsonWebHandler: public AsyncWebHandler {
 private:
@@ -103,7 +103,7 @@ protected:
   int _maxContentLength;
 public:
 
-  AsyncCallbackJsonWebHandler(const String& uri, ArJsonRequestHandlerFunction onRequest, size_t maxJsonBufferSize=DYNAMYC_JSON_DOCUMENT_SIZE) 
+  AsyncCallbackJsonWebHandler(const String& uri, ArJsonRequestHandlerFunction onRequest, size_t maxJsonBufferSize=DYNAMIC_JSON_DOCUMENT_SIZE) 
   : _uri(uri), _method(HTTP_POST|HTTP_PUT|HTTP_PATCH), _onRequest(onRequest), maxJsonBufferSize(maxJsonBufferSize), _maxContentLength(16384) {}
   
   void setMethod(WebRequestMethodComposite method){ _method = method; }
@@ -127,15 +127,8 @@ public:
   virtual void handleRequest(AsyncWebServerRequest *request) override final {
     if(_onRequest) {
       if (request->_tempObject != NULL) {
-
+        _onRequest(request);
-        DynamicJsonDocument jsonBuffer(this->maxJsonBufferSize);
+        return;
-        DeserializationError error = deserializeJson(jsonBuffer, (uint8_t*)(request->_tempObject));
-        if(!error) {
-          JsonObject json = jsonBuffer.as<JsonObject>();
-
-          _onRequest(request, json);
-          return;
-        }
       }
       request->send(_contentLength > _maxContentLength ? 413 : 400);
     } else {

wled00/wled00.ino

@@ -3,7 +3,7 @@
  */
 /*
  * @title WLED project sketch
- * @version 0.9.0-dev
+ * @version 0.9.0-b2
  * @author Christian Schwinne
  */
 
@@ -14,15 +14,16 @@
 //Uncomment some of the following lines to disable features to compile for ESP8266-01 (max flash size 434kB):
 
 //You are required to disable over-the-air updates:
-//#define WLED_DISABLE_OTA
+//#define WLED_DISABLE_OTA         //saves 14kb
 
 //You need to choose some of these features to disable:
-//#define WLED_DISABLE_ALEXA
+//#define WLED_DISABLE_ALEXA       //saves 11kb
-//#define WLED_DISABLE_BLYNK
+//#define WLED_DISABLE_BLYNK       //saves 6kb
-//#define WLED_DISABLE_CRONIXIE
+//#define WLED_DISABLE_CRONIXIE    //saves 3kb
-//#define WLED_DISABLE_HUESYNC
+//#define WLED_DISABLE_HUESYNC     //saves 4kb
-//#define WLED_DISABLE_INFRARED    //there is no pin left for this on ESP8266-01
+//#define WLED_DISABLE_INFRARED    //there is no pin left for this on ESP8266-01, saves 25kb (!)
-#define WLED_ENABLE_ADALIGHT       //only saves about 500b
+#define WLED_ENABLE_MQTT           //saves 12kb
+#define WLED_ENABLE_ADALIGHT       //saves 500b only
 
 #define WLED_DISABLE_FILESYSTEM    //SPIFFS is not used by any WLED feature yet
 //#define WLED_ENABLE_FS_SERVING   //Enable sending html file from SPIFFS before serving progmem version
@@ -31,7 +32,6 @@
 //to toggle usb serial debug (un)comment the following line
 //#define WLED_DEBUG
 
-
 //library inclusions
 #include <Arduino.h>
 #ifdef ESP8266
@@ -84,6 +84,7 @@
 #endif
 
 #ifdef ARDUINO_ARCH_ESP32
+  #undef WLED_USE_ANALOG_LEDS  // Solid RGBW not implemented for ESP32 yet
  /*#ifndef WLED_DISABLE_INFRARED
   #include <IRremote.h>
  #endif*/ //there are issues with ESP32 infrared, so it is disabled for now
@@ -97,8 +98,8 @@
 
 
 //version code in format yymmddb (b = daily build)
-#define VERSION 1912051
+#define VERSION 2001051
-char versionString[] = "0.9.0-dev";
+char versionString[] = "0.9.0-b2";
 
 
 //AP and OTA default passwords (for maximum change them!)
@@ -147,7 +148,6 @@ bool fadeTransition = true;                   //enable crossfading color transit
 bool enableSecTransition = true;              //also enable transition for secondary color
 uint16_t transitionDelay = 750;               //default crossfade duration in ms
 
-//bool strip.reverseMode  = false;            //flip entire LED strip (reverses all effect directions) --> edit in WS2812FX.h
 bool skipFirstLed = false;                    //ignore first LED in strip (useful if you need the LED as signal repeater)
 uint8_t spacing = 0;                          //disables N LEDs between active nodes. (Useful for spacing out lights for more traditional christmas light look)
 uint8_t group = 1;                            //Group LEDs into one logical LED
@@ -156,6 +156,7 @@ byte briMultiplier =  100;                    //% of brightness to set (to limit
 
 //User Interface CONFIG
 char serverDescription[33] = "WLED";          //Name of module
+bool syncToggleReceive = false;               //UIs which only have a single button for sync should toggle send+receive if this is true, only send otherwise
 
 
 //Sync CONFIG
@@ -189,6 +190,7 @@ bool arlsForceMaxBri = false;                 //enable to force max brightness i
 uint16_t e131Universe = 1;                    //settings for E1.31 (sACN) protocol
 bool e131Multicast = false;
 
+bool mqttEnabled = false;
 char mqttDeviceTopic[33] = "";                //main MQTT topic (individual per device, default is wled/mac)
 char mqttGroupTopic[33] = "wled/all";         //second MQTT topic (for example to group devices)
 char mqttServer[33] = "";                     //both domains and IPs should work (no SSL)
@@ -329,11 +331,6 @@ byte overlayCurrent = overlayDefault;
 byte overlaySpeed = 200;
 unsigned long overlayRefreshMs = 200;
 unsigned long overlayRefreshedTime;
-int overlayArr[6];
-uint16_t overlayDur[6];
-uint16_t overlayPauseDur[6];
-int nixieClockI = -1;
-bool nixiePause = false;
 
 //cronixie
 byte dP[]{0,0,0,0,0,0};
@@ -428,6 +425,7 @@ AsyncMqttClient* mqtt = NULL;
 void colorFromUint32(uint32_t,bool=false);
 void serveMessage(AsyncWebServerRequest*,uint16_t,String,String,byte);
 void handleE131Packet(e131_packet_t*, IPAddress);
+void handleOverlayDraw();
 
 #define E131_MAX_UNIVERSE_COUNT 9
 
@@ -483,7 +481,7 @@ void reset()
 
 
 //append new c string to temp buffer efficiently
-bool oappend(char* txt)
+bool oappend(const char* txt)
 {
   uint16_t len = strlen(txt);
   if (olen + len >= OMAX) return false; //buffer full

wled00/wled01_eeprom.ino

@@ -6,7 +6,7 @@
 #define EEPSIZE 2560
 
 //eeprom Version code, enables default settings instead of 0 init on update
-#define EEPVER 13
+#define EEPVER 14
 //0 -> old version, default
 //1 -> 0.4p 1711272 and up
 //2 -> 0.4p 1711302 and up
@@ -20,7 +20,8 @@
 //10-> 0.8.2
 //11-> 0.8.5-dev #mqttauth @TimothyBrown
 //12-> 0.8.7-dev
-//13-> 0.9.0
+//13-> 0.9.0-dev
+//14-> 0.9.0-b1
 
 void commit()
 {
@@ -152,7 +153,7 @@ void saveSettingsToEEPROM()
   EEPROM.write(394, abs(utcOffsetSecs) & 0xFF);
   EEPROM.write(395, (abs(utcOffsetSecs) >> 8) & 0xFF);
   EEPROM.write(396, (utcOffsetSecs<0)); //is negative
-  //397 was initLedsLast
+  EEPROM.write(397, syncToggleReceive);
   EEPROM.write(398, (ledCount >> 8) & 0xFF);
   EEPROM.write(399, !enableSecTransition);
 
@@ -242,6 +243,7 @@ void saveSettingsToEEPROM()
     EEPROM.write(2290 + i, timerMacro[i]  );
   }
 
+  EEPROM.write(2299, mqttEnabled);
   writeStringToEEPROM(2300, mqttServer, 32);
   writeStringToEEPROM(2333, mqttDeviceTopic, 32);
   writeStringToEEPROM(2366, mqttGroupTopic, 32);
@@ -463,6 +465,14 @@ void loadSettingsFromEEPROM(bool first)
   {
     readStringFromEEPROM(990, ntpServerName, 32);
   }
+  if (lastEEPROMversion > 13)
+  {
+    mqttEnabled = EEPROM.read(2299);
+    syncToggleReceive = EEPROM.read(397);
+  } else {
+    mqttEnabled = true;
+    syncToggleReceive = false;
+  }
 
   receiveDirect = !EEPROM.read(2200);
   notifyMacro = EEPROM.read(2201);
@@ -497,6 +507,7 @@ void loadSettingsFromEEPROM(bool first)
   //1024-2047 reserved
 
   readStringFromEEPROM(2220, blynkApiKey, 35);
+  if (strlen(blynkApiKey) < 25) blynkApiKey[0] = 0;
 
   //user MOD memory
   //2944 - 3071 reserved
@@ -552,6 +563,7 @@ bool applyPreset(byte index, bool loadBri = true, bool loadCol = true, bool load
         col[j] = EEPROM.read(i+j+2);
         colSec[j] = EEPROM.read(i+j+6);
       }
+      strip.setColor(2, EEPROM.read(i+12), EEPROM.read(i+13), EEPROM.read(i+14), EEPROM.read(i+15)); //tertiary color
     }
     if (loadFX)
     {
@@ -590,6 +602,12 @@ void savePreset(byte index)
     EEPROM.write(i+10, effectCurrent);
     EEPROM.write(i+11, effectSpeed);
 
+    uint32_t colTer = strip.getSegment(strip.getMainSegmentId()).colors[2];
+    EEPROM.write(i+12, (colTer >> 16) & 0xFF);
+    EEPROM.write(i+13, (colTer >>  8) & 0xFF);
+    EEPROM.write(i+14, (colTer >>  0) & 0xFF);
+    EEPROM.write(i+15, (colTer >> 24) & 0xFF);
+  
     EEPROM.write(i+16, effectIntensity);
     EEPROM.write(i+17, effectPalette);
   } else { //segment 16 can save segments

wled00/wled02_xml.ino

@@ -82,7 +82,7 @@ char* XML_response(AsyncWebServerRequest *request, char* dest = nullptr)
 }
 
 //append a numeric setting to string buffer
-void sappend(char stype, char* key, int val)
+void sappend(char stype, const char* key, int val)
 {
   char ds[] = "d.Sf.";
 
@@ -113,7 +113,7 @@ void sappend(char stype, char* key, int val)
 }
 
 //append a string setting to buffer
-void sappends(char stype, char* key, char* val)
+void sappends(char stype, const char* key, char* val)
 {
   switch(stype)
   {
@@ -244,6 +244,7 @@ void getSettingsJS(byte subPage, char* dest)
   if (subPage == 3)
   {
     sappends('s',"DS",serverDescription);
+    sappend('c',"ST",syncToggleReceive);
   }
 
   if (subPage == 4)
@@ -270,6 +271,9 @@ void getSettingsJS(byte subPage, char* dest)
     sappends('s',"AI",alexaInvocationName);
     sappend('c',"SA",notifyAlexa);
     sappends('s',"BK",(char*)((blynkEnabled)?"Hidden":""));
+
+    #ifdef WLED_ENABLE_MQTT
+    sappend('c',"MQ",mqttEnabled);
     sappends('s',"MS",mqttServer);
     sappend('v',"MQPORT",mqttPort);
     sappends('s',"MQUSER",mqttUser);
@@ -282,6 +286,11 @@ void getSettingsJS(byte subPage, char* dest)
     sappends('s',"MQCID",mqttClientID);
     sappends('s',"MD",mqttDeviceTopic);
     sappends('s',"MG",mqttGroupTopic);
+    #endif
+
+    #ifdef WLED_DISABLE_HUESYNC
+    sappends('m',"(\"hms\")[0]","Unsupported in build");
+    #else
     sappend('v',"H0",hueIP[0]);
     sappend('v',"H1",hueIP[1]);
     sappend('v',"H2",hueIP[2]);
@@ -293,6 +302,7 @@ void getSettingsJS(byte subPage, char* dest)
     sappend('c',"HB",hueApplyBri);
     sappend('c',"HC",hueApplyColor);
     sappends('m',"(\"hms\")[0]",hueError);
+    #endif
   }
 
   if (subPage == 5)

wled00/wled03_set.ino

@@ -14,6 +14,16 @@ void _setRandomColor(bool _sec,bool fromButton=false)
 }
 
 
+bool isAsterisksOnly(const char* str, byte maxLen)
+{
+  for (byte i = 0; i < maxLen; i++) {
+    if (str[i] == 0) break;
+    if (str[i] != '*') return false;
+  }
+  return true;
+}
+
+
 //called upon POST settings form submit
 void handleSettingsSet(AsyncWebServerRequest *request, byte subPage)
 {
@@ -24,7 +34,8 @@ void handleSettingsSet(AsyncWebServerRequest *request, byte subPage)
   if (subPage == 1)
   {
     strlcpy(clientSSID,request->arg("CS").c_str(), 33);
-    if (request->arg("CP").charAt(0) != '*') strlcpy(clientPass, request->arg("CP").c_str(), 65);
+
+    if (!isAsterisksOnly(request->arg("CP").c_str(), 65)) strlcpy(clientPass, request->arg("CP").c_str(), 65);
 
     strlcpy(cmDNS, request->arg("CM").c_str(), 33);
 
@@ -32,7 +43,7 @@ void handleSettingsSet(AsyncWebServerRequest *request, byte subPage)
     strlcpy(apSSID, request->arg("AS").c_str(), 33);
     apHide = request->hasArg("AH");
     int passlen = request->arg("AP").length();
-    if (passlen == 0 || (passlen > 7 && request->arg("AP").charAt(0) != '*')) strlcpy(apPass, request->arg("AP").c_str(), 65);
+    if (passlen == 0 || (passlen > 7 && !isAsterisksOnly(request->arg("AP").c_str(), 65))) strlcpy(apPass, request->arg("AP").c_str(), 65);
     int t = request->arg("AC").toInt(); if (t > 0 && t < 14) apChannel = t;
 
     char k[3]; k[2] = 0;
@@ -103,6 +114,7 @@ void handleSettingsSet(AsyncWebServerRequest *request, byte subPage)
   if (subPage == 3)
   {
     strlcpy(serverDescription, request->arg("DS").c_str(), 33);
+    syncToggleReceive = request->hasArg("ST");
   }
 
   //SYNC
@@ -142,15 +154,19 @@ void handleSettingsSet(AsyncWebServerRequest *request, byte subPage)
       strlcpy(blynkApiKey, request->arg("BK").c_str(), 36); initBlynk(blynkApiKey);
     }
 
+    #ifdef WLED_ENABLE_MQTT
+    mqttEnabled = request->hasArg("MQ");
     strlcpy(mqttServer, request->arg("MS").c_str(), 33);
     t = request->arg("MQPORT").toInt();
     if (t > 0) mqttPort = t;
     strlcpy(mqttUser, request->arg("MQUSER").c_str(), 41);
-    if (request->arg("MQPASS").charAt(0) != '*') strlcpy(mqttPass, request->arg("MQPASS").c_str(), 41);
+    if (!isAsterisksOnly(request->arg("MQPASS").c_str(), 41)) strlcpy(mqttPass, request->arg("MQPASS").c_str(), 41);
     strlcpy(mqttClientID, request->arg("MQCID").c_str(), 41);
     strlcpy(mqttDeviceTopic, request->arg("MD").c_str(), 33);
     strlcpy(mqttGroupTopic, request->arg("MG").c_str(), 33);
+    #endif
 
+    #ifndef WLED_DISABLE_HUESYNC
     for (int i=0;i<4;i++){
       String a = "H"+String(i);
       hueIP[i] = request->arg(a).toInt();
@@ -168,6 +184,7 @@ void handleSettingsSet(AsyncWebServerRequest *request, byte subPage)
     huePollingEnabled = request->hasArg("HP");
     hueStoreAllowed = true;
     reconnectHue();
+    #endif
   }
 
   //TIME
@@ -184,7 +201,6 @@ void handleSettingsSet(AsyncWebServerRequest *request, byte subPage)
 
     if (request->hasArg("OL")){
       overlayDefault = request->arg("OL").toInt();
-      if (overlayCurrent != overlayDefault) strip.unlockAll();
       overlayCurrent = overlayDefault;
     }
 
@@ -443,29 +459,6 @@ bool handleSet(AsyncWebServerRequest *request, const String& req)
   pos = req.indexOf("OL=");
   if (pos > 0) {
     overlayCurrent = getNumVal(&req, pos);
-    strip.unlockAll();
-  }
-
-  //(un)lock pixel (ranges)
-  pos = req.indexOf("&L=");
-  if (pos > 0) {
-    uint16_t index = getNumVal(&req, pos);
-    pos = req.indexOf("L2=");
-    bool unlock = req.indexOf("UL") > 0;
-    if (pos > 0) {
-      uint16_t index2 = getNumVal(&req, pos);
-      if (unlock) {
-        strip.unlockRange(index, index2);
-      } else {
-        strip.lockRange(index, index2);
-      }
-    } else {
-      if (unlock) {
-        strip.unlock(index);
-      } else {
-        strip.lock(index);
-      }
-    }
   }
 
   //apply macro
@@ -606,6 +599,10 @@ bool handleSet(AsyncWebServerRequest *request, const String& req)
 
   //cronixie
   #ifndef WLED_DISABLE_CRONIXIE
+  //mode, 1 countdown
+  pos = req.indexOf("NM=");
+  if (pos > 0) countdownMode = (req.charAt(pos+3) != '0');
+  
   pos = req.indexOf("NX="); //sets digits to code
   if (pos > 0) {
     strlcpy(cronixieDisplay, req.substring(pos + 3, pos + 9).c_str(), 6);
@@ -620,9 +617,6 @@ bool handleSet(AsyncWebServerRequest *request, const String& req)
     overlayRefreshedTime = 0;
   }
   #endif
-  //mode, 1 countdown
-  pos = req.indexOf("NM=");
-  if (pos > 0) countdownMode = (req.charAt(pos+3) != '0');
 
   pos = req.indexOf("U0="); //user var 0
   if (pos > 0) {

wled00/wled05_init.ino

@@ -97,6 +97,7 @@ void wledInit()
 void beginStrip()
 {
   // Initialize NeoPixel Strip and button
+  strip.setShowCallback(handleOverlayDraw);
 
 #ifdef BTNPIN
   pinMode(BTNPIN, INPUT_PULLUP);
@@ -141,7 +142,10 @@ void initAP(bool resetAP=false){
     if (udpPort > 0 && udpPort != ntpLocalPort)
     {
       udpConnected = notifierUdp.begin(udpPort);
-      if (udpConnected && udpRgbPort != udpPort) udpRgbConnected = rgbUdp.begin(udpRgbPort);
+    }
+    if (udpRgbPort > 0 && udpRgbPort != ntpLocalPort && udpRgbPort != udpPort)
+    {
+      udpRgbConnected = rgbUdp.begin(udpRgbPort);
     }
 
     dnsServer.setErrorReplyCode(DNSReplyCode::NoError);
@@ -232,7 +236,7 @@ void initInterfaces() {
   if (ntpEnabled) ntpConnected = ntpUdp.begin(ntpLocalPort);
 
   initBlynk(blynkApiKey);
-  Serial.println(e131.begin((e131Multicast) ? E131_MULTICAST : E131_UNICAST , e131Universe, E131_MAX_UNIVERSE_COUNT));
+  e131.begin((e131Multicast) ? E131_MULTICAST : E131_UNICAST , e131Universe, E131_MAX_UNIVERSE_COUNT);
   reconnectHue();
   initMqtt();
   interfacesInited = true;
@@ -240,12 +244,26 @@ void initInterfaces() {
 }
 
 byte stacO = 0;
+uint32_t lastHeap;
+unsigned long heapTime = 0;
 
 void handleConnection() {
-  //TODO: reconnect if heap <8000
   if (millis() < 2000 && (!WLED_WIFI_CONFIGURED || apBehavior == 2)) return;
   if (lastReconnectAttempt == 0) initConnection();
 
+  //reconnect WiFi to clear stale allocations if heap gets too low
+  if (millis() - heapTime > 5000)
+  {
+    uint32_t heap = ESP.getFreeHeap();
+    if (heap < 9000 && lastHeap < 9000) {
+      DEBUG_PRINT("Heap too low! ");
+      DEBUG_PRINTLN(heap);
+      forceReconnect = true;
+    }
+    lastHeap = heap;
+    heapTime = millis();
+  }
+  
   byte stac = 0;
   if (apActive) {
     #ifdef ESP8266

wled00/wled07_notify.ino

@@ -38,7 +38,7 @@ void notify(byte callMode, bool followUp=false)
   //0: old 1: supports white 2: supports secondary color
   //3: supports FX intensity, 24 byte packet 4: supports transitionDelay 5: sup palette
   //6: supports timebase syncing, 29 byte packet 7: supports tertiary color 
-  udpOut[11] = 6; 
+  udpOut[11] = 7; 
   udpOut[12] = colSec[0];
   udpOut[13] = colSec[1];
   udpOut[14] = colSec[2];
@@ -47,10 +47,12 @@ void notify(byte callMode, bool followUp=false)
   udpOut[17] = (transitionDelay >> 0) & 0xFF;
   udpOut[18] = (transitionDelay >> 8) & 0xFF;
   udpOut[19] = effectPalette;
-  /*udpOut[20] = colTer[0];
+  uint32_t colTer = strip.getSegment(strip.getMainSegmentId()).colors[2];
-  udpOut[21] = colTer[1];
+  udpOut[20] = (colTer >> 16) & 0xFF;
-  udpOut[22] = colTer[2];
+  udpOut[21] = (colTer >>  8) & 0xFF;
-  udpOut[23] = colTer[3];*/
+  udpOut[22] = (colTer >>  0) & 0xFF;
+  udpOut[23] = (colTer >> 24) & 0xFF;
+  
   udpOut[24] = followUp;
   uint32_t t = millis() + strip.timebase;
   udpOut[25] = (t >> 24) & 0xFF;
@@ -77,7 +79,6 @@ void arlsLock(uint32_t timeoutMs)
     {
       strip.setPixelColor(i,0,0,0,0);
     }
-    strip.unlockAll();
     realtimeActive = true;
   }
   realtimeTimeout = millis() + timeoutMs;
@@ -120,13 +121,11 @@ void handleNotifications()
   {
     e131NewData = false;
     strip.show();
-    Serial.println("Show");
   }
 
   //unlock strip when realtime UDP times out
   if (realtimeActive && millis() > realtimeTimeout)
   {
-    //strip.unlockAll();
     strip.setBrightness(bri);
     realtimeActive = false;
     //strip.setMode(effectCurrent);
@@ -180,7 +179,7 @@ void handleNotifications()
         col[0] = udpIn[3];
         col[1] = udpIn[4];
         col[2] = udpIn[5];
-        if (udpIn[11] > 0) //check if sending modules white val is inteded
+        if (udpIn[11] > 0) //sending module's white val is intended
         {
           col[3] = udpIn[10];
           if (udpIn[11] > 1)
@@ -193,17 +192,14 @@ void handleNotifications()
           if (udpIn[11] > 5)
           {
             uint32_t t = (udpIn[25] << 24) | (udpIn[26] << 16) | (udpIn[27] << 8) | (udpIn[28]);
-            t -= 2;
+            t += 2;
             t -= millis();
             strip.timebase = t;
           }
-          /*if (udpIn[11] > 6)
+          if (udpIn[11] > 6)
           {
-            colTer[0] = udpIn[20];
+            strip.setColor(2, udpIn[20], udpIn[21], udpIn[22], udpIn[23]); //tertiary color
-            colTer[1] = udpIn[21];
+          }
-            colTer[2] = udpIn[22];
-            colSec[3] = udpIn[23];
-          }*/
         }
       }
 

wled00/wled08_led.ino

@@ -12,6 +12,13 @@ void setValuesFromMainSeg()
   effectPalette = seg.palette;
 }
 
+
+void resetTimebase()
+{
+  strip.timebase = 0 - millis();
+}
+
+
 void toggleOnOff()
 {
   if (bri == 0)
@@ -81,7 +88,7 @@ void colorUpdated(int callMode)
 {
   //call for notifier -> 0: init 1: direct change 2: button 3: notification 4: nightlight 5: other (No notification)
   //                     6: fx changed 7: hue 8: preset cycle 9: blynk 10: alexa
-  if (callMode != 1 && callMode != 5) strip.applyToAllSelected = true; //if not from JSON api, which directly sets segments
+  if (callMode != 0 && callMode != 1 && callMode != 5) strip.applyToAllSelected = true; //if not from JSON api, which directly sets segments
   
   bool fxChanged = strip.setEffectConfig(effectCurrent, effectSpeed, effectIntensity, effectPalette);
   if (!colorChanged())
@@ -113,6 +120,7 @@ void colorUpdated(int callMode)
     colIT[i] = col[i];
     colSecIT[i] = colSec[i];
   }
+  if (briT == 0 && callMode != 3) resetTimebase(); 
   briIT = bri;
   if (bri > 0) briLast = bri;
   

wled00/wled10_ntp.ino

@@ -25,6 +25,8 @@ TimeChangeRule CDT = {Second, Sun, Mar, 2, -300 };    //Daylight time = UTC - 5
 TimeChangeRule CST = {First, Sun, Nov, 2, -360 };     //Standard time = UTC - 6 hours
 Timezone tzUSCentral(CDT, CST);
 
+Timezone tzCASaskatchewan(CST, CST); //Central without DST
+
 TimeChangeRule MDT = {Second, Sun, Mar, 2, -360 };    //Daylight time = UTC - 6 hours
 TimeChangeRule MST = {First, Sun, Nov, 2, -420 };     //Standard time = UTC - 7 hours
 Timezone tzUSMountain(MDT, MST);
@@ -55,7 +57,7 @@ Timezone tzNK(NKST, NKST);
 TimeChangeRule IST = {Last, Sun, Mar, 1, 330};     // India Standard Time = UTC + 5.5 hours
 Timezone tzIndia(IST, IST);
 
-Timezone* timezones[] = {&tzUTC, &tzUK, &tzEUCentral, &tzEUEastern, &tzUSEastern, &tzUSCentral, &tzUSMountain, &tzUSArizona, &tzUSPacific, &tzChina, &tzJapan, &tzAUEastern, &tzNZ, &tzNK, &tzIndia};  
+Timezone* timezones[] = {&tzUTC, &tzUK, &tzEUCentral, &tzEUEastern, &tzUSEastern, &tzUSCentral, &tzUSMountain, &tzUSArizona, &tzUSPacific, &tzChina, &tzJapan, &tzAUEastern, &tzNZ, &tzNK, &tzIndia, &tzCASaskatchewan};  
 
 void handleNetworkTime()
 {
@@ -161,13 +163,16 @@ void setCountdown()
 //returns true if countdown just over
 bool checkCountdown()
 {
-  long diff = countdownTime - now();
+  unsigned long n = now();
-  local = abs(diff);
+  local = countdownTime - n;
-  if (diff <0 && !countdownOverTriggered)
+  if (n > countdownTime) {
-  {
+    local = n - countdownTime;
-    if (macroCountdown != 0) applyMacro(macroCountdown);
+    if (!countdownOverTriggered)
-    countdownOverTriggered = true;
+    {
-    return true;
+      if (macroCountdown != 0) applyMacro(macroCountdown);
+      countdownOverTriggered = true;
+      return true;
+    }
   }
   return false;
 }

wled00/wled11_ol.ino

@@ -1,6 +1,7 @@
 /*
  * Used to draw clock overlays over the strip
  */
+ 
 void initCronixie()
 {
   if (overlayCurrent == 3 && !cronixieInit)
@@ -17,107 +18,6 @@ void initCronixie()
 }
 
 
-void _nixieDisplay(int num[], uint16_t dur[], uint16_t pausedur[], byte cnt)
-{
-  strip.setRange(overlayMin, overlayMax, 0);
-  if (num[nixieClockI] >= 0 && !nixiePause)
-  {
-    strip.setIndividual(num[nixieClockI],((uint32_t)colT[3] << 24)| ((uint32_t)colT[0] << 16) | ((uint32_t)colT[1] << 8) | colT[2]);
-    strip.unlock(num[nixieClockI]);
-  }
-  if (!nixiePause)
-  {
-    overlayRefreshMs = dur[nixieClockI];
-  } else
-  {
-    overlayRefreshMs = pausedur[nixieClockI];
-  }
-  if (pausedur[nixieClockI] > 0 && !nixiePause)
-  {
-    nixiePause = true;
-  } else {
-    if (nixieClockI < cnt -1)
-    {
-      nixieClockI++;
-    } else
-    {
-      nixieClockI = -1;
-    }
-    nixiePause = false;
-  }
-}
-
-void _nixieNumber(int number, int dur) 
-{
-  if (nixieClockI < 0)
-  {
-    DEBUG_PRINT(number);
-    int digitCnt = -1;
-    int digits[4];
-    digits[3] = number/1000;
-    digits[2] = (number/100)%10;
-    digits[1] = (number/10)%10;
-    digits[0] = number%10;
-    if (number > 999) //four digits
-    {
-      digitCnt = 4;
-    } else if (number > 99) //three digits
-    {
-      digitCnt = 3;
-    } else if (number > 9) //two digits
-    {
-      digitCnt = 2;
-    } else { //single digit
-      digitCnt = 1;
-    }
-    DEBUG_PRINT(" ");
-    for (int i = 0; i < digitCnt; i++)
-    {
-      DEBUG_PRINT(digits[i]);
-      overlayArr[digitCnt-1-i] = digits[i];
-      overlayDur[digitCnt-1-i] = ((dur/4)*3)/digitCnt;
-      overlayPauseDur[digitCnt-1-i] = 0;
-    }
-    DEBUG_PRINTLN(" ");
-    for (int i = 1; i < digitCnt; i++)
-    {
-      if (overlayArr[i] == overlayArr[i-1])
-      {
-        overlayPauseDur[i-1] = dur/12;
-        overlayDur[i-1] = overlayDur[i-1]-dur/12;
-      }
-    }
-    for (int i = digitCnt; i < 6; i++)
-    {
-      overlayArr[i] = -1;
-      overlayDur[i] = 0;
-      overlayPauseDur[i] = 0;
-    }
-    overlayPauseDur[5] = dur/4;
-    for (int i = 0; i < 6; i++)
-    {
-      if (overlayArr[i] != -1)
-      {
-        overlayArr[i] = overlayArr[i] + overlayMin;
-      }
-    }
-    for (int i = 0; i <6; i++)
-    {
-      DEBUG_PRINT(overlayArr[i]);
-      DEBUG_PRINT(" ");
-      DEBUG_PRINT(overlayDur[i]);
-      DEBUG_PRINT(" ");
-      DEBUG_PRINT(overlayPauseDur[i]);
-      DEBUG_PRINT(" ");
-    }
-    DEBUG_PRINTLN(" ");
-    nixieClockI = 0;
-  } else {
-    _nixieDisplay(overlayArr, overlayDur, overlayPauseDur, 6);
-  }
-}
-
-
 void handleOverlays()
 {
   if (millis() - overlayRefreshedTime > overlayRefreshMs)
@@ -125,22 +25,16 @@ void handleOverlays()
     initCronixie();
     updateLocalTime();
     checkTimers();
-    switch (overlayCurrent)
+    checkCountdown();
-    {
+    if (overlayCurrent == 3) _overlayCronixie();//Diamex cronixie clock kit
-      case 0: break;//no overlay
-      case 1: _overlayAnalogClock(); break;//2 analog clock
-      case 2: _overlayNixieClock(); break;//nixie 1-digit
-      case 3: _overlayCronixie();//Diamex cronixie clock kit
-    }
-    if (!countdownMode || overlayCurrent < 2) checkCountdown(); //countdown macro activation must work
     overlayRefreshedTime = millis();
   }
 }
 
+
 void _overlayAnalogClock()
 {
   int overlaySize = overlayMax - overlayMin +1;
-  strip.unlockAll();
   if (countdownMode)
   {
     _overlayAnalogCountdown(); return;
@@ -173,115 +67,19 @@ void _overlayAnalogClock()
     {
       pix = analogClock12pixel + round((overlaySize / 12.0) *i);
       if (pix > overlayMax) pix -= overlaySize;
-      strip.setIndividual(pix, 0x00FFAA);
+      strip.setPixelColor(pix, 0x00FFAA);
     }
   }
-  if (!analogClockSecondsTrail) strip.setIndividual(secondPixel, 0xFF0000);
+  if (!analogClockSecondsTrail) strip.setPixelColor(secondPixel, 0xFF0000);
-  strip.setIndividual(minutePixel, 0x00FF00);
+  strip.setPixelColor(minutePixel, 0x00FF00);
-  strip.setIndividual(hourPixel, 0x0000FF);
+  strip.setPixelColor(hourPixel, 0x0000FF);
   overlayRefreshMs = 998;
 }
 
-void _overlayNixieClock()
-{
-  #ifdef WLED_DISABLE_CRONIXIE
-  if (countdownMode) checkCountdown();
-  #else
-  
-  if (countdownMode)
-  {
-    _overlayNixieCountdown(); return;
-  }
-  if (nixieClockI < 0)
-  {
-      overlayArr[0] = hour(local);
-      if (useAMPM) overlayArr[0] = overlayArr[0]%12;
-      overlayArr[1] = -1;
-      if (overlayArr[0] > 9)
-      {
-        overlayArr[1] = overlayArr[0]%10;
-        overlayArr[0] = overlayArr[0]/10;
-      }
-      overlayArr[2] = minute(local);
-      overlayArr[3] = overlayArr[2]%10;
-      overlayArr[2] = overlayArr[2]/10;
-      overlayArr[4] = -1;
-      overlayArr[5] = -1;
-      if (analogClockSecondsTrail)
-      {
-        overlayArr[4] = second(local);
-        overlayArr[5] = overlayArr[4]%10;
-        overlayArr[4] = overlayArr[4]/10;
-      }
-      for (int i = 0; i < 6; i++)
-      {
-        if (overlayArr[i] != -1)
-        {
-          overlayArr[i] = overlayArr[i] + overlayMin;
-        }
-      }
-      overlayDur[0] = 12 + 12*(255 - overlaySpeed);
-      if (overlayArr[1] == overlayArr[0])
-      {
-        overlayPauseDur[0] = 3 + 3*(255 - overlaySpeed);
-      } else
-      {
-        overlayPauseDur[0] = 0;
-      }
-      if (overlayArr[1] == -1)
-      {
-        overlayDur[1] = 0;
-      } else
-      {
-        overlayDur[1] = 12 + 12*(255 - overlaySpeed);
-      }
-      overlayPauseDur[1] = 9 + 9*(255 - overlaySpeed);
-
-      overlayDur[2] = 12 + 12*(255 - overlaySpeed);
-      if (overlayArr[2] == overlayArr[3])
-      {
-        overlayPauseDur[2] = 3 + 3*(255 - overlaySpeed);
-      } else
-      {
-        overlayPauseDur[2] = 0;
-      }
-      overlayDur[3] = 12 + 12*(255 - overlaySpeed);
-      overlayPauseDur[3] = 9 + 9*(255 - overlaySpeed);
-      
-      if (overlayArr[4] == -1)
-      {
-        overlayDur[4] = 0;
-        overlayPauseDur[4] = 0;
-        overlayDur[5] = 0;
-      } else
-      {
-        overlayDur[4] = 12 + 12*(255 - overlaySpeed);
-        if (overlayArr[5] == overlayArr[4])
-        {
-          overlayPauseDur[4] = 3 + 3*(255 - overlaySpeed);
-        } else
-        {
-          overlayPauseDur[4] = 0;
-        }
-        overlayDur[5] = 12 + 12*(255 - overlaySpeed);
-      }
-      overlayPauseDur[5] = 22 + 22*(255 - overlaySpeed);
-      
-      nixieClockI = 0;   
-  } else
-  {
-    _nixieDisplay(overlayArr, overlayDur, overlayPauseDur, 6);
-  }
-  #endif
-}
 
 void _overlayAnalogCountdown()
 {
-  strip.unlockAll();
+  if (now() < countdownTime)
-  if (now() >= countdownTime)
-  {
-    checkCountdown();
-  } else
   {
     long diff = countdownTime - now();
     double pval = 60;
@@ -321,31 +119,7 @@ void _overlayAnalogCountdown()
 }
 
 
-void _overlayNixieCountdown()
+void handleOverlayDraw() {
-{
+  if (overlayCurrent != 1) return; //only analog clock
-  if (now() >= countdownTime)
+  _overlayAnalogClock();
-  {
-    if (checkCountdown())
-    {
-      _nixieNumber(2019, 2019);
-    }
-  } else
-  {
-    long diff = countdownTime - now();
-    if (diff > 86313600L) //display in years if more than 999 days
-    {
-      diff = diff/31557600L;
-    } else if (diff > 3596400) //display in days if more than 999 hours
-    {
-      diff = diff/86400;
-    } else if (diff > 59940) //display in hours if more than 999 minutes
-    {
-      diff = diff/1440;
-    } else if (diff > 999) //display in minutes if more than 999 seconds
-    {
-      diff = diff/60;
-    }
-    _nixieNumber(diff, 800);
-  }
-  overlayRefreshMs = 998;
 }

wled00/wled12_alexa.ino

@@ -62,10 +62,11 @@ void onAlexaChange(EspalexaDevice* dev)
   } else //color
   {
     uint32_t color = espalexaDevice->getRGB();
+    col[3] = ((color >> 24) & 0xFF);  // white color from Alexa is "pure white only" 
     col[0] = ((color >> 16) & 0xFF);
     col[1] = ((color >>  8) & 0xFF);
     col[2] = (color & 0xFF);
-    if (useRGBW) colorRGBtoRGBW(col);
+    if (useRGBW && col[3] == 0) colorRGBtoRGBW(col);  // do not touch white value if EspalexaDevice.cpp did set the white channel
     colorUpdated(10);
   }
 }

wled00/wled13_cronixie.ino

@@ -145,9 +145,7 @@ void setCronixie()
 
 void _overlayCronixie()
 {
-  if (countdownMode) checkCountdown();
   #ifndef WLED_DISABLE_CRONIXIE
-  
   byte h = hour(local);
   byte h0 = h;
   byte m = minute(local);

wled00/wled14_colors.ino

@@ -165,6 +165,6 @@ void colorRGBtoRGBW(byte* rgb) //rgb to rgbw (http://codewelt.com/rgbw)
   float low = minf(rgb[0],minf(rgb[1],rgb[2]));
   float high = maxf(rgb[0],maxf(rgb[1],rgb[2]));
   if (high < 0.1f) return;
-  float sat = 255.0f * ((high - low) / high);
+  float sat = 100.0f * ((high - low) / high);;   // maximum saturation is 100  (corrected from 255)
   rgb[3] = (byte)((255.0f - sat) / 255.0f * (rgb[0] + rgb[1] + rgb[2]) / 3);
 }

wled00/wled17_mqtt.ino

@@ -2,6 +2,8 @@
  * MQTT communication protocol for home automation
  */
 
+#ifdef WLED_ENABLE_MQTT
+
 void parseMQTTBriPayload(char* payload)
 {
   if      (strstr(payload, "ON") || strstr(payload, "on") || strstr(payload, "true")) {bri = briLast; colorUpdated(1);}
@@ -104,7 +106,7 @@ void publishMqtt()
 bool initMqtt()
 {
   lastMqttReconnectAttempt = millis();
-  if (mqttServer[0] == 0 || !WLED_CONNECTED) return false;
+  if (!mqttEnabled || mqttServer[0] == 0 || !WLED_CONNECTED) return false;
 
   if (mqtt == nullptr) {
     mqtt = new AsyncMqttClient();
@@ -130,3 +132,8 @@ bool initMqtt()
   mqtt->connect();
   return true;
 }
+
+#else
+bool initMqtt(){return false;}
+void publishMqtt(){}
+#endif

wled00/wled18_server.ino

@@ -68,7 +68,7 @@ void initServer()
   
   server.on("/settings/wifi", HTTP_POST, [](AsyncWebServerRequest *request){
     if (!(wifiLock && otaLock)) handleSettingsSet(request, 1);
-    serveMessage(request, 200,"WiFi settings saved.","Reconnecting now...",129);
+    serveMessage(request, 200,"WiFi settings saved.","Please connect to the new IP (if changed)",129);
     forceReconnect = true;
   });
 
@@ -79,7 +79,7 @@ void initServer()
 
   server.on("/settings/ui", HTTP_POST, [](AsyncWebServerRequest *request){
     handleSettingsSet(request, 3);
-    serveMessage(request, 200,"UI settings saved.","Reloading to apply theme...",122);
+    serveMessage(request, 200,"UI settings saved.","Redirecting...",1);
   });
 
   server.on("/settings/sync", HTTP_POST, [](AsyncWebServerRequest *request){
@@ -94,7 +94,7 @@ void initServer()
 
   server.on("/settings/sec", HTTP_POST, [](AsyncWebServerRequest *request){
     handleSettingsSet(request, 6);
-    if (!doReboot) serveMessage(request, 200,"Security settings saved.","Rebooting now, please wait ~10 seconds...",129);
+    if (!doReboot) serveMessage(request, 200,"Security settings saved.","Rebooting, please wait ~10 seconds...",129);
     doReboot = true;
   });
 
@@ -102,9 +102,20 @@ void initServer()
     serveJson(request);
   });
 
-  AsyncCallbackJsonWebHandler* handler = new AsyncCallbackJsonWebHandler("/json", [](AsyncWebServerRequest *request, JsonObject root) {
+  AsyncCallbackJsonWebHandler* handler = new AsyncCallbackJsonWebHandler("/json", [](AsyncWebServerRequest *request) {
-    if (root.isNull()){request->send(500, "application/json", "{\"error\":\"Parsing failed\"}"); return;}
+    bool verboseResponse = false;
-    if (deserializeState(root)) { serveJson(request); return; } //if JSON contains "v" (verbose response)
+    { //scope JsonDocument so it releases its buffer
+      DynamicJsonDocument jsonBuffer(8192);
+      DeserializationError error = deserializeJson(jsonBuffer, (uint8_t*)(request->_tempObject));
+      JsonObject root = jsonBuffer.as<JsonObject>();
+      if (error || root.isNull()) {
+        request->send(400, "application/json", "{\"error\":10}"); return;
+      }
+      verboseResponse = deserializeState(root);
+    }
+    if (verboseResponse) { //if JSON contains "v"
+      serveJson(request); return; 
+    } 
     request->send(200, "application/json", "{\"success\":true}");
   });
   server.addHandler(handler);

wled00/wled19_json.ino

@@ -86,8 +86,8 @@ bool deserializeState(JsonObject root)
   int ps = root["ps"] | -1;
   if (ps >= 0) applyPreset(ps);
   
-  int cy = root["pl"] | -1;
+  int cy = root["pl"] | -2;
-  presetCyclingEnabled = (cy >= 0);
+  if (cy > -2) presetCyclingEnabled = (cy >= 0);
   JsonObject ccnf = root["ccnf"];
   presetCycleMin = ccnf["min"] | presetCycleMin;
   presetCycleMax = ccnf["max"] | presetCycleMax;
@@ -121,15 +121,23 @@ bool deserializeState(JsonObject root)
   if (segVar.is<JsonObject>())
   {
     int id = segVar["id"] | -1;
+    
     if (id < 0) { //set all selected segments
+      bool didSet = false;
+      byte lowestActive = 99;
       for (byte s = 0; s < strip.getMaxSegments(); s++)
       {
         WS2812FX::Segment sg = strip.getSegment(s);
-        if (sg.isActive() && sg.isSelected())
+        if (sg.isActive())
         {
-          deserializeSegment(segVar, s);
+          if (lowestActive == 99) lowestActive = s;
+          if (sg.isSelected()) {
+            deserializeSegment(segVar, s);
+            didSet = true;
+          }
         }
       }
+      if (!didSet && lowestActive < strip.getMaxSegments()) deserializeSegment(segVar, lowestActive);
     } else { //set only the segment with the specified ID
       deserializeSegment(segVar, it);
     }
@@ -142,7 +150,6 @@ bool deserializeState(JsonObject root)
     }
   }
 
-  //fromJson = true;
   colorUpdated(noNotification ? 5:1);
 
   ps = root["psave"] | -1;
@@ -236,10 +243,12 @@ void serializeInfo(JsonObject root)
   leds_pin.add(LEDPIN);
   
   leds["pwr"] = strip.currentMilliamps;
-  leds["maxpwr"] = strip.ablMilliampsMax;
+  leds["maxpwr"] = (strip.currentMilliamps)? strip.ablMilliampsMax : 0;
   leds["maxseg"] = strip.getMaxSegments();
   leds["seglock"] = false; //will be used in the future to prevent modifications to segment config
 
+  root["str"] = syncToggleReceive;
+  
   root["name"] = serverDescription;
   root["udpport"] = udpPort;
   root["live"] = realtimeActive;
@@ -295,7 +304,7 @@ void serializeInfo(JsonObject root)
   
   root["brand"] = "WLED";
   root["product"] = "DIY light";
-  root["btype"] = "dev";
+  root["btype"] = "src";
   root["mac"] = escapedMac;
 }