Skip first led cleanup.

wled00/bus_manager.h

@@ -17,17 +17,17 @@
 //temporary struct for passing bus configuration to bus
 struct BusConfig {
   uint8_t type = TYPE_WS2812_RGB;
-  uint16_t count = 1;
-  uint16_t start = 0;
-  uint8_t colorOrder = COL_ORDER_GRB;
-  bool reversed = false;
-  bool skipFirst = false;
-  bool rgbwOverride = false;
+  uint16_t count;
+  uint16_t start;
+  uint8_t colorOrder;
+  bool reversed;
+  uint8_t skipAmount;
+  bool rgbwOverride;
   uint8_t pins[5] = {LEDPIN, 255, 255, 255, 255};
-  BusConfig(uint8_t busType, uint8_t* ppins, uint16_t pstart, uint16_t len = 1, uint8_t pcolorOrder = COL_ORDER_GRB, bool rev = false, bool skip = false) {
+  BusConfig(uint8_t busType, uint8_t* ppins, uint16_t pstart, uint16_t len = 1, uint8_t pcolorOrder = COL_ORDER_GRB, bool rev = false, uint8_t skip = 0) {
     rgbwOverride = (bool) GET_BIT(busType,7);
     type = busType & 0x7F;  // bit 7 is hacked to include RGBW info (1=RGBW, 0=RGB)
-    count = len; start = pstart; colorOrder = pcolorOrder; reversed = rev; skipFirst = skip;
+    count = len; start = pstart; colorOrder = pcolorOrder; reversed = rev; skipAmount = skip;
     uint8_t nPins = 1;
     if (type > 47) nPins = 2;
     else if (type > 41 && type < 46) nPins = NUM_PWM_PINS(type);
@@ -81,8 +81,8 @@ class Bus {
     return false;
   }
 
-  virtual bool skipFirstLed() {
-    return false;
+  virtual uint8_t skipFirstLed() {
+    return 0;
   }
 
   inline uint8_t getType() {
@@ -116,10 +116,10 @@ class BusDigital : public Bus {
         cleanup(); return;
       }
     }
-    _skip = bc.skipFirst ? LED_SKIP_AMOUNT : 0; //sacrificial pixels
-    _len = bc.count + _skip;
     reversed = bc.reversed;
-    _rgbw = bc.rgbwOverride; // RGBW override in bit 7
+    _skip = bc.skipAmount;    //sacrificial pixels
+    _len = bc.count + _skip;
+    _rgbw = bc.rgbwOverride;  // RGBW override in bit 7
     _iType = PolyBus::getI(type, _pins, nr, _rgbw);
     if (_iType == I_NONE) return;
     _busPtr = PolyBus::create(_iType, _pins, _len);
@@ -181,8 +181,8 @@ class BusDigital : public Bus {
     return _rgbw;
   }
 
-  inline bool skipFirstLed() {
-    return (bool)_skip;
+  inline uint8_t skipFirstLed() {
+    return _skip;
   }
 
   inline void reinit() {

wled00/cfg.cpp

@@ -102,7 +102,6 @@ void deserializeConfig() {
 
   JsonArray ins = hw_led["ins"];
   uint8_t s = 0;  // bus iterator
-  bool skipFirst = false;
   strip.isRgbw = false;
   busses.removeAll();
   uint32_t mem = 0;
@@ -123,9 +122,8 @@ void deserializeConfig() {
     if (start >= lC+length) continue; // something is very wrong :)
     //limit length of strip if it would exceed total configured LEDs
     //if (start + length > ledCount) length = ledCount - start;
-    uint8_t colorOrder = (int)elm[F("order")];
-    //(this shouldn't have been in ins obj. but remains here for compatibility)
-    skipFirst = (bool) elm[F("skip")];
+    uint8_t colorOrder = elm[F("order")];
+    uint8_t skipFirst = elm[F("skip")];
     uint8_t ledType = elm["type"] | TYPE_WS2812_RGB;
     bool reversed = elm["rev"];
     //RGBW mode is enabled if at least one of the strips is RGBW
@@ -144,7 +142,7 @@ void deserializeConfig() {
   JsonObject hw_btn_ins_0 = hw[F("btn")][F("ins")][0];
   CJSON(buttonEnabled, hw_btn_ins_0["type"]);
   int hw_btn_pin = hw_btn_ins_0["pin"][0];
-  if (pinManager.allocatePin(hw_btn_pin,false)) {
+  if (hw_btn_pin>=0 && pinManager.allocatePin(hw_btn_pin,false)) {
     btnPin = hw_btn_pin;
     pinMode(btnPin, INPUT_PULLUP);
   } else {
@@ -160,7 +158,7 @@ void deserializeConfig() {
 
   #ifndef WLED_DISABLE_INFRARED
   int hw_ir_pin = hw["ir"]["pin"] | -1; // 4
-  if (pinManager.allocatePin(hw_ir_pin,false)) {
+  if (hw_ir_pin >=0 && pinManager.allocatePin(hw_ir_pin,false)) {
     irPin = hw_ir_pin;
   } else {
     irPin = -1;
@@ -169,8 +167,8 @@ void deserializeConfig() {
   CJSON(irEnabled, hw["ir"]["type"]);
 
   JsonObject relay = hw[F("relay")];
-  int hw_relay_pin = relay["pin"];
-  if (pinManager.allocatePin(hw_relay_pin,true)) {
+  int hw_relay_pin = relay["pin"] | -1;
+  if (hw_relay_pin>=0 && pinManager.allocatePin(hw_relay_pin,true)) {
     rlyPin = hw_relay_pin;
     pinMode(rlyPin, OUTPUT);
   } else {

wled00/set.cpp

@@ -83,9 +83,9 @@ void handleSettingsSet(AsyncWebServerRequest *request, byte subPage)
     #endif
     if (btnPin>=0 && pinManager.isPinAllocated(btnPin)) pinManager.deallocatePin(btnPin);
 
-    bool skip = request->hasArg(F("SL"));
     strip.isRgbw = false;
 
+    uint8_t skip = request->hasArg(F("SL")) ? LED_SKIP_AMOUNT : 0;
     uint8_t colorOrder, type;
     uint16_t length, start;
     uint8_t pins[5] = {255, 255, 255, 255, 255};
@@ -99,7 +99,7 @@ void handleSettingsSet(AsyncWebServerRequest *request, byte subPage)
       char cv[4] = "CV"; cv[2] = 48+s; cv[3] = 0; //strip reverse
       char ew[4] = "EW"; ew[2] = 48+s; ew[3] = 0; //strip RGBW override
       if (!request->hasArg(lp)) {
-        DEBUG_PRINTLN("No data."); break;
+        DEBUG_PRINTLN(F("No data.")); break;
       }
       for (uint8_t i = 0; i < 5; i++) {
         lp[1] = 48+i;

wled00/wled.h

@@ -8,7 +8,7 @@
  */
 
 // version code in format yymmddb (b = daily build)
-#define VERSION 2103312
+#define VERSION 2104011
 
 //uncomment this if you have a "my_config.h" file you'd like to use
 //#define WLED_USE_MY_CONFIG
@@ -168,7 +168,7 @@
 #endif
 
 // Global Variable definitions
-WLED_GLOBAL char versionString[] _INIT("0.12.0-b5");
+WLED_GLOBAL char versionString[] _INIT("0.12.0-b6");
 #define WLED_CODENAME "Hikari"
 
 // AP and OTA default passwords (for maximum security change them!)

wled00/xml.cpp

@@ -345,7 +345,7 @@ void getSettingsJS(byte subPage, char* dest)
       sappend('v',ls,bus->getStart());
       sappend('c',cv,bus->reversed);
       sappend('c',ew,bus->isRgbw());
-      skip = skip || bus->skipFirstLed();
+      if (!skip) skip = bus->skipFirstLed()>0;
     }
     sappend('v',SET_F("MA"),strip.ablMilliampsMax);
     sappend('v',SET_F("LA"),strip.milliampsPerLed);