lba.gitea/WLED
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Beta-3 changes

Browse Source 
- remove I2C init  from usermods
- PCF8574 (&co) port expander support
- refactor PIR &  Rotary encoder & 4LD
- reboot race condition
- optimisations
This commit is contained in:
Blaz Kristan 2023-05-30 19:36:14 +02:00
parent 680afe972e
commit 82e448de7c
31 changed files with 5527 additions and 5268 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

40
usermods/BH1750_v2/usermod_bh1750.h
View File

@ -8,7 +8,6 @@
#pragma once
#include "wled.h"
#include <Wire.h>
#include <BH1750.h>
// the max frequency to check photoresistor, 10 seconds
@ -56,15 +55,6 @@ private:
static const char _offset[];
static const char _HomeAssistantDiscovery[];
// set the default pins based on the architecture, these get overridden by Usermod menu settings
#ifdef ARDUINO_ARCH_ESP32 // ESP32 boards
#define HW_PIN_SCL 22
#define HW_PIN_SDA 21
#else // ESP8266 boards
#define HW_PIN_SCL 5
#define HW_PIN_SDA 4
#endif
int8_t ioPin[2] = {HW_PIN_SCL, HW_PIN_SDA}; // I2C pins: SCL, SDA...defaults to Arch hardware pins but overridden at setup()
bool initDone = false;
bool sensorFound = false;
@ -123,14 +113,8 @@ private:
public:
void setup()
{
bool HW_Pins_Used = (ioPin[0]==HW_PIN_SCL && ioPin[1]==HW_PIN_SDA); // note whether architecture-based hardware SCL/SDA pins used
PinOwner po = PinOwner::UM_BH1750; // defaults to being pinowner for SCL/SDA pins
PinManagerPinType pins[2] = { { ioPin[0], true }, { ioPin[1], true } }; // allocate pins
if (HW_Pins_Used) po = PinOwner::HW_I2C; // allow multiple allocations of HW I2C bus pins
if (!pinManager.allocateMultiplePins(pins, 2, po)) return;
Wire.begin(ioPin[1], ioPin[0]);
PinManagerPinType pins[2] = { { i2c_sda, true }, { i2c_scl, true } }; // allocate pins
if (!pinManager.allocateMultiplePins(pins, 2, PinOwner::HW_I2C)) return;
sensorFound = lightMeter.begin();
initDone = true;
}
@ -216,9 +200,6 @@ public:
top[FPSTR(_minReadInterval)] = minReadingInterval;
top[FPSTR(_HomeAssistantDiscovery)] = HomeAssistantDiscovery;
top[FPSTR(_offset)] = offset;
JsonArray io_pin = top.createNestedArray(F("pin"));
for (byte i=0; i<2; i++) io_pin.add(ioPin[i]);
top[F("help4Pins")] = F("SCL,SDA"); // help for Settings page
DEBUG_PRINTLN(F("BH1750 config saved."));
}
@ -226,8 +207,6 @@ public:
// called before setup() to populate properties from values stored in cfg.json
bool readFromConfig(JsonObject &root)
{
int8_t newPin[2]; for (byte i=0; i<2; i++) newPin[i] = ioPin[i]; // prepare to note changed pins
// we look for JSON object.
JsonObject top = root[FPSTR(_name)];
if (top.isNull())
@ -244,27 +223,12 @@ public:
configComplete &= getJsonValue(top[FPSTR(_minReadInterval)], minReadingInterval, 500); //ms
configComplete &= getJsonValue(top[FPSTR(_HomeAssistantDiscovery)], HomeAssistantDiscovery, false);
configComplete &= getJsonValue(top[FPSTR(_offset)], offset, 1);
for (byte i=0; i<2; i++) configComplete &= getJsonValue(top[F("pin")][i], newPin[i], ioPin[i]);
DEBUG_PRINT(FPSTR(_name));
if (!initDone) {
// first run: reading from cfg.json
for (byte i=0; i<2; i++) ioPin[i] = newPin[i];
DEBUG_PRINTLN(F(" config loaded."));
} else {
DEBUG_PRINTLN(F(" config (re)loaded."));
// changing parameters from settings page
bool pinsChanged = false;
for (byte i=0; i<2; i++) if (ioPin[i] != newPin[i]) { pinsChanged = true; break; } // check if any pins changed
if (pinsChanged) { //if pins changed, deallocate old pins and allocate new ones
PinOwner po = PinOwner::UM_BH1750;
if (ioPin[0]==HW_PIN_SCL && ioPin[1]==HW_PIN_SDA) po = PinOwner::HW_I2C; // allow multiple allocations of HW I2C bus pins
pinManager.deallocateMultiplePins((const uint8_t *)ioPin, 2, po); // deallocate pins
for (byte i=0; i<2; i++) ioPin[i] = newPin[i];
setup();
}
// use "return !top["newestParameter"].isNull();" when updating Usermod with new features
return !top[F("pin")].isNull();
}
return configComplete;

29
usermods/BME280_v2/usermod_bme280.h
View File

@ -9,7 +9,6 @@
#include "wled.h"
#include <Arduino.h>
#include <Wire.h>
#include <BME280I2C.h> // BME280 sensor
#include <EnvironmentCalculations.h> // BME280 extended measurements
@ -34,7 +33,6 @@ private:
#ifdef ESP8266
//uint8_t RST_PIN = 16; // Uncoment for Heltec WiFi-Kit-8
#endif
int8_t ioPin[2] = {i2c_scl, i2c_sda}; // I2C pins: SCL, SDA...defaults to Arch hardware pins but overridden at setup()
bool initDone = false;
// BME280 sensor settings
@ -186,13 +184,8 @@ private:
public:
void setup()
{
bool HW_Pins_Used = (ioPin[0]==i2c_scl && ioPin[1]==i2c_sda); // note whether architecture-based hardware SCL/SDA pins used
PinOwner po = PinOwner::UM_BME280; // defaults to being pinowner for SCL/SDA pins
PinManagerPinType pins[2] = { { ioPin[0], true }, { ioPin[1], true } }; // allocate pins
if (HW_Pins_Used) po = PinOwner::HW_I2C; // allow multiple allocations of HW I2C bus pins
if (!pinManager.allocateMultiplePins(pins, 2, po)) { sensorType=0; return; }
Wire.begin(ioPin[1], ioPin[0]);
PinManagerPinType pins[2] = { { i2c_sda, true }, { i2c_scl, true } }; // allocate pins
if (!pinManager.allocateMultiplePins(pins, 2, PinOwner::HW_I2C)) { sensorType=0; return; }
if (!bme.begin())
{
@ -415,9 +408,6 @@ public:
top[F("PublishAlways")] = PublishAlways;
top[F("UseCelsius")] = UseCelsius;
top[F("HomeAssistantDiscovery")] = HomeAssistantDiscovery;
JsonArray io_pin = top.createNestedArray(F("pin"));
for (byte i=0; i<2; i++) io_pin.add(ioPin[i]);
top[F("help4Pins")] = F("SCL,SDA"); // help for Settings page
DEBUG_PRINTLN(F("BME280 config saved."));
}
@ -427,8 +417,6 @@ public:
// default settings values could be set here (or below using the 3-argument getJsonValue()) instead of in the class definition or constructor
// setting them inside readFromConfig() is slightly more robust, handling the rare but plausible use case of single value being missing after boot (e.g. if the cfg.json was manually edited and a value was removed)
int8_t newPin[2]; for (byte i=0; i<2; i++) newPin[i] = ioPin[i]; // prepare to note changed pins
JsonObject top = root[FPSTR(_name)];
if (top.isNull()) {
DEBUG_PRINT(F(_name));
@ -447,27 +435,14 @@ public:
configComplete &= getJsonValue(top[F("PublishAlways")], PublishAlways, false);
configComplete &= getJsonValue(top[F("UseCelsius")], UseCelsius, true);
configComplete &= getJsonValue(top[F("HomeAssistantDiscovery")], HomeAssistantDiscovery, false);
for (byte i=0; i<2; i++) configComplete &= getJsonValue(top[F("pin")][i], newPin[i], ioPin[i]);
DEBUG_PRINT(FPSTR(_name));
if (!initDone) {
// first run: reading from cfg.json
for (byte i=0; i<2; i++) ioPin[i] = newPin[i];
DEBUG_PRINTLN(F(" config loaded."));
} else {
DEBUG_PRINTLN(F(" config (re)loaded."));
// changing parameters from settings page
bool pinsChanged = false;
for (byte i=0; i<2; i++) if (ioPin[i] != newPin[i]) { pinsChanged = true; break; } // check if any pins changed
if (pinsChanged) { //if pins changed, deallocate old pins and allocate new ones
PinOwner po = PinOwner::UM_BME280;
if (ioPin[0]==i2c_scl && ioPin[1]==i2c_sda) po = PinOwner::HW_I2C; // allow multiple allocations of HW I2C bus pins
pinManager.deallocateMultiplePins((const uint8_t *)ioPin, 2, po); // deallocate pins
for (byte i=0; i<2; i++) ioPin[i] = newPin[i];
setup();
}
// use "return !top["newestParameter"].isNull();" when updating Usermod with new features
return !top[F("pin")].isNull();
}
return configComplete;

308
usermods/PIR_sensor_switch/usermod_PIR_sensor_switch.h
View File

@ -20,7 +20,7 @@
* This usermod handles PIR sensor states.
* The strip will be switched on and the off timer will be resetted when the sensor goes HIGH.
* When the sensor state goes LOW, the off timer is started and when it expires, the strip is switched off.
*
* Maintained by: @blazoncek
*
* Usermods allow you to add own functionality to WLED more easily
* See: https://github.com/Aircoookie/WLED/wiki/Add-own-functionality
@ -38,21 +38,21 @@ public:
~PIRsensorSwitch() {}
//Enable/Disable the PIR sensor
void EnablePIRsensor(bool en) { enabled = en; }
inline void EnablePIRsensor(bool en) { enabled = en; }
// Get PIR sensor enabled/disabled state
bool PIRsensorEnabled() { return enabled; }
inline bool PIRsensorEnabled() { return enabled; }
private:
byte prevPreset = 0;
byte prevPlaylist = 0;
uint32_t offTimerStart = 0; // off timer start time
volatile unsigned long offTimerStart = 0; // off timer start time
volatile bool PIRtriggered = false; // did PIR trigger?
byte NotifyUpdateMode = CALL_MODE_NO_NOTIFY; // notification mode for stateUpdated(): CALL_MODE_NO_NOTIFY or CALL_MODE_DIRECT_CHANGE
byte sensorPinState = LOW; // current PIR sensor pin state
bool initDone = false; // status of initialization
bool PIRtriggered = false;
unsigned long lastLoop = 0;
// configurable parameters
@ -66,6 +66,7 @@ private:
// flag to enable triggering only if WLED is initially off (LEDs are not on, preventing running effect being overwritten by PIR)
bool m_offOnly = false;
bool m_offMode = offMode;
bool m_override = false;
// Home Assistant
bool HomeAssistantDiscovery = false; // is HA discovery turned on
@ -81,12 +82,122 @@ private:
static const char _offOnly[];
static const char _haDiscovery[];
static const char _notify[];
static const char _override[];
/**
* check if it is daytime
* if sunrise/sunset is not defined (no NTP or lat/lon) default to nighttime
*/
bool isDayTime() {
static bool isDayTime();
/**
* switch strip on/off
*/
void switchStrip(bool switchOn);
void publishMqtt(const char* state);
// Create an MQTT Binary Sensor for Home Assistant Discovery purposes, this includes a pointer to the topic that is published to in the Loop.
void publishHomeAssistantAutodiscovery();
/**
* Read and update PIR sensor state.
* Initilize/reset switch off timer
*/
bool updatePIRsensorState();
/**
* switch off the strip if the delay has elapsed
*/
bool handleOffTimer();
public:
//Functions called by WLED
/**
* setup() is called once at boot. WiFi is not yet connected at this point.
* You can use it to initialize variables, sensors or similar.
*/
void setup();
/**
* connected() is called every time the WiFi is (re)connected
* Use it to initialize network interfaces
*/
//void connected();
/**
* onMqttConnect() is called when MQTT connection is established
*/
void onMqttConnect(bool sessionPresent);
/**
* loop() is called continuously. Here you can check for events, read sensors, etc.
*/
void loop();
/**
* addToJsonInfo() can be used to add custom entries to the /json/info part of the JSON API.
*
* Add PIR sensor state and switch off timer duration to jsoninfo
*/
void addToJsonInfo(JsonObject &root);
/**
* onStateChanged() is used to detect WLED state change
*/
void onStateChange(uint8_t mode);
/**
* addToJsonState() can be used to add custom entries to the /json/state part of the JSON API (state object).
* Values in the state object may be modified by connected clients
*/
//void addToJsonState(JsonObject &root);
/**
* readFromJsonState() can be used to receive data clients send to the /json/state part of the JSON API (state object).
* Values in the state object may be modified by connected clients
*/
void readFromJsonState(JsonObject &root);
/**
* provide the changeable values
*/
void addToConfig(JsonObject &root);
/**
* provide UI information and allow extending UI options
*/
void appendConfigData();
/**
* restore the changeable values
* readFromConfig() is called before setup() to populate properties from values stored in cfg.json
*
* The function should return true if configuration was successfully loaded or false if there was no configuration.
*/
bool readFromConfig(JsonObject &root);
/**
* getId() allows you to optionally give your V2 usermod an unique ID (please define it in const.h!).
* This could be used in the future for the system to determine whether your usermod is installed.
*/
uint16_t getId() { return USERMOD_ID_PIRSWITCH; }
};
// strings to reduce flash memory usage (used more than twice)
const char PIRsensorSwitch::_name[] PROGMEM = "PIRsensorSwitch";
const char PIRsensorSwitch::_enabled[] PROGMEM = "PIRenabled";
const char PIRsensorSwitch::_switchOffDelay[] PROGMEM = "PIRoffSec";
const char PIRsensorSwitch::_onPreset[] PROGMEM = "on-preset";
const char PIRsensorSwitch::_offPreset[] PROGMEM = "off-preset";
const char PIRsensorSwitch::_nightTime[] PROGMEM = "nighttime-only";
const char PIRsensorSwitch::_mqttOnly[] PROGMEM = "mqtt-only";
const char PIRsensorSwitch::_offOnly[] PROGMEM = "off-only";
const char PIRsensorSwitch::_haDiscovery[] PROGMEM = "HA-discovery";
const char PIRsensorSwitch::_notify[] PROGMEM = "notifications";
const char PIRsensorSwitch::_override[] PROGMEM = "override";
bool PIRsensorSwitch::isDayTime() {
updateLocalTime();
uint8_t hr = hour(localTime);
uint8_t mi = minute(localTime);
@ -104,13 +215,10 @@ private:
}
}
return false;
}
}
/**
* switch strip on/off
*/
void switchStrip(bool switchOn)
{
void PIRsensorSwitch::switchStrip(bool switchOn)
{
if (m_offOnly && bri && (switchOn || (!PIRtriggered && !switchOn))) return; //if lights on and off only, do nothing
if (PIRtriggered && switchOn) return; //if already on and triggered before, do nothing
PIRtriggered = switchOn;
@ -156,11 +264,11 @@ private:
stateUpdated(NotifyUpdateMode);
}
}
}
}
void publishMqtt(const char* state)
{
#ifndef WLED_DISABLE_MQTT
void PIRsensorSwitch::publishMqtt(const char* state)
{
#ifndef WLED_DISABLE_MQTT
//Check if MQTT Connected, otherwise it will crash the 8266
if (WLED_MQTT_CONNECTED) {
char subuf[64];
@ -168,13 +276,12 @@ private:
strcat_P(subuf, PSTR("/motion"));
mqtt->publish(subuf, 0, false, state);
}
#endif
}
#endif
}
// Create an MQTT Binary Sensor for Home Assistant Discovery purposes, this includes a pointer to the topic that is published to in the Loop.
void publishHomeAssistantAutodiscovery()
{
#ifndef WLED_DISABLE_MQTT
void PIRsensorSwitch::publishHomeAssistantAutodiscovery()
{
#ifndef WLED_DISABLE_MQTT
if (WLED_MQTT_CONNECTED) {
StaticJsonDocument<600> doc;
char uid[24], json_str[1024], buf[128];
@ -204,15 +311,11 @@ private:
mqtt->publish(buf, 0, true, json_str, payload_size); // do we really need to retain?
}
#endif
}
#endif
}
/**
* Read and update PIR sensor state.
* Initilize/reset switch off timer
*/
bool updatePIRsensorState()
{
bool PIRsensorSwitch::updatePIRsensorState()
{
bool pinState = digitalRead(PIRsensorPin);
if (pinState != sensorPinState) {
sensorPinState = pinState; // change previous state
@ -230,13 +333,10 @@ private:
return true;
}
return false;
}
}
/**
* switch off the strip if the delay has elapsed
*/
bool handleOffTimer()
{
bool PIRsensorSwitch::handleOffTimer()
{
if (offTimerStart > 0 && millis() - offTimerStart > m_switchOffDelay) {
offTimerStart = 0;
if (enabled == true) {
@ -247,17 +347,12 @@ private:
return true;
}
return false;
}
}
public:
//Functions called by WLED
//Functions called by WLED
/**
* setup() is called once at boot. WiFi is not yet connected at this point.
* You can use it to initialize variables, sensors or similar.
*/
void setup()
{
void PIRsensorSwitch::setup()
{
if (enabled) {
// pin retrieved from cfg.json (readFromConfig()) prior to running setup()
if (PIRsensorPin >= 0 && pinManager.allocatePin(PIRsensorPin, false, PinOwner::UM_PIR)) {
@ -273,30 +368,17 @@ public:
}
}
initDone = true;
}
}
/**
* connected() is called every time the WiFi is (re)connected
* Use it to initialize network interfaces
*/
void connected()
{
}
/**
* onMqttConnect() is called when MQTT connection is established
*/
void onMqttConnect(bool sessionPresent) {
void PIRsensorSwitch::onMqttConnect(bool sessionPresent)
{
if (HomeAssistantDiscovery) {
publishHomeAssistantAutodiscovery();
}
}
}
/**
* loop() is called continuously. Here you can check for events, read sensors, etc.
*/
void loop()
{
void PIRsensorSwitch::loop()
{
// only check sensors 4x/s
if (!enabled || millis() - lastLoop < 250 || strip.isUpdating()) return;
lastLoop = millis();
@ -304,15 +386,10 @@ public:
if (!updatePIRsensorState()) {
handleOffTimer();
}
}
}
/**
* addToJsonInfo() can be used to add custom entries to the /json/info part of the JSON API.
*
* Add PIR sensor state and switch off timer duration to jsoninfo
*/
void addToJsonInfo(JsonObject &root)
{
void PIRsensorSwitch::addToJsonInfo(JsonObject &root)
{
JsonObject user = root["u"];
if (user.isNull()) user = root.createNestedObject("u");
@ -369,39 +446,21 @@ public:
JsonObject sensor = root[F("sensor")];
if (sensor.isNull()) sensor = root.createNestedObject(F("sensor"));
sensor[F("motion")] = sensorPinState || offTimerStart>0 ? true : false;
}
}
/**
* onStateChanged() is used to detect WLED state change
*/
void onStateChange(uint8_t mode) {
void PIRsensorSwitch::onStateChange(uint8_t mode) {
if (!initDone) return;
DEBUG_PRINT(F("PIR: offTimerStart=")); DEBUG_PRINTLN(offTimerStart);
if (PIRtriggered && offTimerStart) {
if (m_override && PIRtriggered && offTimerStart) { // debounce
// checking PIRtriggered and offTimerStart will prevent cancellation upon On trigger
DEBUG_PRINTLN(F("PIR: Canceled."));
offTimerStart = 0;
PIRtriggered = false;
}
}
}
/**
* addToJsonState() can be used to add custom entries to the /json/state part of the JSON API (state object).
* Values in the state object may be modified by connected clients
*/
/*
void addToJsonState(JsonObject &root)
{
}
*/
/**
* readFromJsonState() can be used to receive data clients send to the /json/state part of the JSON API (state object).
* Values in the state object may be modified by connected clients
*/
void readFromJsonState(JsonObject &root)
{
void PIRsensorSwitch::readFromJsonState(JsonObject &root)
{
if (!initDone) return; // prevent crash on boot applyPreset()
JsonObject usermod = root[FPSTR(_name)];
if (!usermod.isNull()) {
@ -409,14 +468,10 @@ public:
enabled = usermod[FPSTR(_enabled)].as<bool>();
}
}
}
}
/**
* provide the changeable values
*/
void addToConfig(JsonObject &root)
{
void PIRsensorSwitch::addToConfig(JsonObject &root)
{
JsonObject top = root.createNestedObject(FPSTR(_name));
top[FPSTR(_enabled)] = enabled;
top[FPSTR(_switchOffDelay)] = m_switchOffDelay / 1000;
@ -426,25 +481,21 @@ public:
top[FPSTR(_nightTime)] = m_nightTimeOnly;
top[FPSTR(_mqttOnly)] = m_mqttOnly;
top[FPSTR(_offOnly)] = m_offOnly;
top[FPSTR(_override)] = m_override;
top[FPSTR(_haDiscovery)] = HomeAssistantDiscovery;
top[FPSTR(_notify)] = (NotifyUpdateMode != CALL_MODE_NO_NOTIFY);
DEBUG_PRINTLN(F("PIR config saved."));
}
}
void appendConfigData()
{
void PIRsensorSwitch::appendConfigData()
{
oappend(SET_F("addInfo('PIRsensorSwitch:HA-discovery',1,'HA=Home Assistant');")); // 0 is field type, 1 is actual field
oappend(SET_F("addInfo('PIRsensorSwitch:notifications',1,'Periodic WS updates');")); // 0 is field type, 1 is actual field
}
oappend(SET_F("addInfo('PIRsensorSwitch:override',1,'Cancel timer on change');")); // 0 is field type, 1 is actual field
}
/**
* restore the changeable values
* readFromConfig() is called before setup() to populate properties from values stored in cfg.json
*
* The function should return true if configuration was successfully loaded or false if there was no configuration.
*/
bool readFromConfig(JsonObject &root)
{
bool PIRsensorSwitch::readFromConfig(JsonObject &root)
{
bool oldEnabled = enabled;
int8_t oldPin = PIRsensorPin;
@ -469,6 +520,7 @@ public:
m_nightTimeOnly = top[FPSTR(_nightTime)] | m_nightTimeOnly;
m_mqttOnly = top[FPSTR(_mqttOnly)] | m_mqttOnly;
m_offOnly = top[FPSTR(_offOnly)] | m_offOnly;
m_override = top[FPSTR(_override)] | m_override;
HomeAssistantDiscovery = top[FPSTR(_haDiscovery)] | HomeAssistantDiscovery;
NotifyUpdateMode = top[FPSTR(_notify)] ? CALL_MODE_DIRECT_CHANGE : CALL_MODE_NO_NOTIFY;
@ -498,27 +550,5 @@ public:
DEBUG_PRINTLN(F(" config (re)loaded."));
}
// use "return !top["newestParameter"].isNull();" when updating Usermod with new features
return !top[FPSTR(_haDiscovery)].isNull();
}
/**
* getId() allows you to optionally give your V2 usermod an unique ID (please define it in const.h!).
* This could be used in the future for the system to determine whether your usermod is installed.
*/
uint16_t getId()
{
return USERMOD_ID_PIRSWITCH;
}
};
// strings to reduce flash memory usage (used more than twice)
const char PIRsensorSwitch::_name[] PROGMEM = "PIRsensorSwitch";
const char PIRsensorSwitch::_enabled[] PROGMEM = "PIRenabled";
const char PIRsensorSwitch::_switchOffDelay[] PROGMEM = "PIRoffSec";
const char PIRsensorSwitch::_onPreset[] PROGMEM = "on-preset";
const char PIRsensorSwitch::_offPreset[] PROGMEM = "off-preset";
const char PIRsensorSwitch::_nightTime[] PROGMEM = "nighttime-only";
const char PIRsensorSwitch::_mqttOnly[] PROGMEM = "mqtt-only";
const char PIRsensorSwitch::_offOnly[] PROGMEM = "off-only";
const char PIRsensorSwitch::_haDiscovery[] PROGMEM = "HA-discovery";
const char PIRsensorSwitch::_notify[] PROGMEM = "notifications";
return !top[FPSTR(_override)].isNull();
}

26
usermods/ST7789_display/ST7789_display.h
View File

@ -17,12 +17,6 @@
#ifndef TFT_HEIGHT
#error Please define TFT_HEIGHT
#endif
#ifndef TFT_MOSI
#error Please define TFT_MOSI
#endif
#ifndef TFT_SCLK
#error Please define TFT_SCLK
#endif
#ifndef TFT_DC
#error Please define TFT_DC
#endif
@ -140,8 +134,14 @@ class St7789DisplayUsermod : public Usermod {
*/
void setup()
{
PinManagerPinType pins[] = { { TFT_MOSI, true }, { TFT_MISO, false}, { TFT_SCLK, true }, { TFT_CS, true}, { TFT_DC, true}, { TFT_RST, true }, { TFT_BL, true } };
if (!pinManager.allocateMultiplePins(pins, 7, PinOwner::UM_FourLineDisplay)) { enabled = false; return; }
PinManagerPinType spiPins[] = { { spi_mosi, true }, { spi_miso, false}, { spi_sclk, true } };
if (!pinManager.allocateMultiplePins(spiPins, 3, PinOwner::HW_SPI)) { enabled = false; return; }
PinManagerPinType displayPins[] = { { TFT_CS, true}, { TFT_DC, true}, { TFT_RST, true }, { TFT_BL, true } };
if (!pinManager.allocateMultiplePins(displayPins, sizeof(displayPins)/sizeof(PinManagerPinType), PinOwner::UM_FourLineDisplay)) {
pinManager.deallocateMultiplePins(spiPins, 3, PinOwner::HW_SPI);
enabled = false;
return;
}
tft.init();
tft.setRotation(0); //Rotation here is set up for the text to be readable with the port on the left. Use 1 to flip.
@ -365,9 +365,6 @@ class St7789DisplayUsermod : public Usermod {
{
JsonObject top = root.createNestedObject("ST7789");
JsonArray pins = top.createNestedArray("pin");
pins.add(TFT_MOSI);
pins.add(TFT_MISO);
pins.add(TFT_SCLK);
pins.add(TFT_CS);
pins.add(TFT_DC);
pins.add(TFT_RST);
@ -376,6 +373,13 @@ class St7789DisplayUsermod : public Usermod {
}
void appendConfigData() {
oappend(SET_F("addInfo('ST7789:pin[]',0,'','SPI CS');"));
oappend(SET_F("addInfo('ST7789:pin[]',1,'','SPI DC');"));
oappend(SET_F("addInfo('ST7789:pin[]',2,'','SPI RST');"));
oappend(SET_F("addInfo('ST7789:pin[]',2,'','SPI BL');"));
}
/*
* readFromConfig() can be used to read back the custom settings you added with addToConfig().
* This is called by WLED when settings are loaded (currently this only happens once immediately after boot)

9
usermods/Si7021_MQTT_HA/usermod_si7021_mqtt_ha.h
View File

@ -13,14 +13,6 @@
Adafruit_Si7021 si7021;
#ifdef ARDUINO_ARCH_ESP32 //ESP32 boards
uint8_t SCL_PIN = 22;
uint8_t SDA_PIN = 21;
#else //ESP8266 boards
uint8_t SCL_PIN = 5;
uint8_t SDA_PIN = 4;
#endif
class Si7021_MQTT_HA : public Usermod
{
private:
@ -184,7 +176,6 @@ class Si7021_MQTT_HA : public Usermod
{
if (enabled) {
Serial.println("Si7021_MQTT_HA: Starting!");
Wire.begin(SDA_PIN, SCL_PIN);
Serial.println("Si7021_MQTT_HA: Initializing sensors.. ");
_initializeSensor();
}

1
usermods/VL53L0X_gestures/usermod_vl53l0x_gestures.h
View File

@ -52,7 +52,6 @@ class UsermodVL53L0XGestures : public Usermod {
void setup() {
PinManagerPinType pins[2] = { { i2c_scl, true }, { i2c_sda, true } };
if (!pinManager.allocateMultiplePins(pins, 2, PinOwner::HW_I2C)) { enabled = false; return; }
Wire.begin();
sensor.setTimeout(150);
if (!sensor.init())

18
usermods/audioreactive/audio_reactive.h
View File

@ -569,16 +569,6 @@ class AudioReactive : public Usermod {
#else
int8_t i2sckPin = I2S_CKPIN;
#endif
#ifndef ES7243_SDAPIN
int8_t sdaPin = -1;
#else
int8_t sdaPin = ES7243_SDAPIN;
#endif
#ifndef ES7243_SCLPIN
int8_t sclPin = -1;
#else
int8_t sclPin = ES7243_SCLPIN;
#endif
#ifndef MCLK_PIN
int8_t mclkPin = I2S_PIN_NO_CHANGE; /* ESP32: only -1, 0, 1, 3 allowed*/
#else
@ -1136,7 +1126,7 @@ class AudioReactive : public Usermod {
DEBUGSR_PRINTLN(F("AR: ES7243 Microphone (right channel only)."));
audioSource = new ES7243(SAMPLE_RATE, BLOCK_SIZE);
delay(100);
if (audioSource) audioSource->initialize(sdaPin, sclPin, i2swsPin, i2ssdPin, i2sckPin, mclkPin);
if (audioSource) audioSource->initialize(i2swsPin, i2ssdPin, i2sckPin, mclkPin);
break;
case 3:
DEBUGSR_PRINT(F("AR: SPH0645 Microphone - ")); DEBUGSR_PRINTLN(F(I2S_MIC_CHANNEL_TEXT));
@ -1657,8 +1647,6 @@ class AudioReactive : public Usermod {
pinArray.add(i2swsPin);
pinArray.add(i2sckPin);
pinArray.add(mclkPin);
pinArray.add(sdaPin);
pinArray.add(sclPin);
JsonObject cfg = top.createNestedObject("config");
cfg[F("squelch")] = soundSquelch;
@ -1719,8 +1707,6 @@ class AudioReactive : public Usermod {
configComplete &= getJsonValue(top[FPSTR(_digitalmic)]["pin"][1], i2swsPin);
configComplete &= getJsonValue(top[FPSTR(_digitalmic)]["pin"][2], i2sckPin);
configComplete &= getJsonValue(top[FPSTR(_digitalmic)]["pin"][3], mclkPin);
configComplete &= getJsonValue(top[FPSTR(_digitalmic)]["pin"][4], sdaPin);
configComplete &= getJsonValue(top[FPSTR(_digitalmic)]["pin"][5], sclPin);
configComplete &= getJsonValue(top["config"][F("squelch")], soundSquelch);
configComplete &= getJsonValue(top["config"][F("gain")], sampleGain);
@ -1784,8 +1770,6 @@ class AudioReactive : public Usermod {
#else
oappend(SET_F("addInfo('AudioReactive:digitalmic:pin[]',3,'<i>master clock</i>','I2S MCLK');"));
#endif
oappend(SET_F("addInfo('AudioReactive:digitalmic:pin[]',4,'','I2C SDA');"));
oappend(SET_F("addInfo('AudioReactive:digitalmic:pin[]',5,'','I2C SCL');"));
}

41
usermods/audioreactive/audio_source.h
View File

@ -1,6 +1,5 @@
#pragma once
#include <Wire.h>
#include "wled.h"
#include <driver/i2s.h>
#include <driver/adc.h>
@ -383,21 +382,12 @@ class I2SSource : public AudioSource {
*/
class ES7243 : public I2SSource {
private:
// I2C initialization functions for ES7243
void _es7243I2cBegin() {
bool i2c_initialized = Wire.begin(pin_ES7243_SDA, pin_ES7243_SCL, 100000U);
if (i2c_initialized == false) {
DEBUGSR_PRINTLN(F("AR: ES7243 failed to initialize I2C bus driver."));
}
}
void _es7243I2cWrite(uint8_t reg, uint8_t val) {
#ifndef ES7243_ADDR
Wire.beginTransmission(0x13);
#ifndef ES7243_ADDR
#define ES7243_ADDR 0x13 // default address
#else
#endif
Wire.beginTransmission(ES7243_ADDR);
#endif
Wire.write((uint8_t)reg);
Wire.write((uint8_t)val);
uint8_t i2cErr = Wire.endTransmission(); // i2cErr == 0 means OK
@ -407,7 +397,6 @@ class ES7243 : public I2SSource {
}
void _es7243InitAdc() {
_es7243I2cBegin();
_es7243I2cWrite(0x00, 0x01);
_es7243I2cWrite(0x06, 0x00);
_es7243I2cWrite(0x05, 0x1B);
@ -422,44 +411,20 @@ public:
_config.channel_format = I2S_CHANNEL_FMT_ONLY_RIGHT;
};
void initialize(int8_t sdaPin, int8_t sclPin, int8_t i2swsPin, int8_t i2ssdPin, int8_t i2sckPin, int8_t mclkPin) {
// check that pins are valid
if ((sdaPin < 0) || (sclPin < 0)) {
DEBUGSR_PRINTF("\nAR: invalid ES7243 I2C pins: SDA=%d, SCL=%d\n", sdaPin, sclPin);
return;
}
void initialize(int8_t i2swsPin, int8_t i2ssdPin, int8_t i2sckPin, int8_t mclkPin) {
if ((i2sckPin < 0) || (mclkPin < 0)) {
DEBUGSR_PRINTF("\nAR: invalid I2S pin: SCK=%d, MCLK=%d\n", i2sckPin, mclkPin);
return;
}
// Reserve SDA and SCL pins of the I2C interface
PinManagerPinType es7243Pins[2] = { { sdaPin, true }, { sclPin, true } };
if (!pinManager.allocateMultiplePins(es7243Pins, 2, PinOwner::HW_I2C)) {
pinManager.deallocateMultiplePins(es7243Pins, 2, PinOwner::HW_I2C);
DEBUGSR_PRINTF("\nAR: Failed to allocate ES7243 I2C pins: SDA=%d, SCL=%d\n", sdaPin, sclPin);
return;
}
pin_ES7243_SDA = sdaPin;
pin_ES7243_SCL = sclPin;
// First route mclk, then configure ADC over I2C, then configure I2S
_es7243InitAdc();
I2SSource::initialize(i2swsPin, i2ssdPin, i2sckPin, mclkPin);
}
void deinitialize() {
// Release SDA and SCL pins of the I2C interface
PinManagerPinType es7243Pins[2] = { { pin_ES7243_SDA, true }, { pin_ES7243_SCL, true } };
pinManager.deallocateMultiplePins(es7243Pins, 2, PinOwner::HW_I2C);
I2SSource::deinitialize();
}
private:
int8_t pin_ES7243_SDA;
int8_t pin_ES7243_SCL;
};

4
usermods/mpu6050_imu/usermod_mpu6050_imu.h
View File

@ -87,10 +87,8 @@ class MPU6050Driver : public Usermod {
void setup() {
PinManagerPinType pins[2] = { { i2c_scl, true }, { i2c_sda, true } };
if (!pinManager.allocateMultiplePins(pins, 2, PinOwner::HW_I2C)) { enabled = false; return; }
// join I2C bus (I2Cdev library doesn't do this automatically)
#if I2CDEV_IMPLEMENTATION == I2CDEV_ARDUINO_WIRE
Wire.begin();
Wire.setClock(400000); // 400kHz I2C clock. Comment this line if having compilation difficulties
Wire.setClock(400000U); // 400kHz I2C clock. Comment this line if having compilation difficulties
#elif I2CDEV_IMPLEMENTATION == I2CDEV_BUILTIN_FASTWIRE
Fastwire::setup(400, true);
#endif

45
usermods/multi_relay/usermod_multi_relay.h
View File

@ -20,6 +20,14 @@
#define ON true
#define OFF false
#ifndef USERMOD_USE_PCF8574
#undef USE_PCF8574
#define USE_PCF8574 false
#else
#undef USE_PCF8574
#define USE_PCF8574 true
#endif
#ifndef PCF8574_ADDRESS
#define PCF8574_ADDRESS 0x20 // some may start at 0x38
#endif
@ -52,21 +60,15 @@ class MultiRelay : public Usermod {
// array of relays
Relay _relay[MULTI_RELAY_MAX_RELAYS];
// switch timer start time
uint32_t _switchTimerStart = 0;
// old brightness
bool _oldMode;
// usermod enabled
bool enabled = false; // needs to be configured (no default config)
// status of initialisation
bool initDone = false;
bool usePcf8574 = false;
uint8_t addrPcf8574 = PCF8574_ADDRESS;
bool HAautodiscovery = false;
uint16_t periodicBroadcastSec = 60;
unsigned long lastBroadcast = 0;
uint32_t _switchTimerStart; // switch timer start time
bool _oldMode; // old brightness
bool enabled; // usermod enabled
bool initDone; // status of initialisation
bool usePcf8574;
uint8_t addrPcf8574;
bool HAautodiscovery;
uint16_t periodicBroadcastSec;
unsigned long lastBroadcast;
// strings to reduce flash memory usage (used more than twice)
static const char _name[];
@ -103,7 +105,7 @@ class MultiRelay : public Usermod {
/**
* desctructor
*/
~MultiRelay() {}
//~MultiRelay() {}
/**
* Enable/Disable the usermod
@ -331,7 +333,16 @@ byte MultiRelay::IOexpanderRead(int address) {
// public methods
MultiRelay::MultiRelay() {
MultiRelay::MultiRelay()
: _switchTimerStart(0)
, enabled(false)
, initDone(false)
, usePcf8574(USE_PCF8574)
, addrPcf8574(PCF8574_ADDRESS)
, HAautodiscovery(false)
, periodicBroadcastSec(60)
, lastBroadcast(0)
{
const int8_t defPins[] = {MULTI_RELAY_PINS};
for (size_t i=0; i<MULTI_RELAY_MAX_RELAYS; i++) {
_relay[i].pin = i<sizeof(defPins) ? defPins[i] : -1;

10
usermods/sensors_to_mqtt/usermod_v2_SensorsToMqtt.h
View File

@ -6,7 +6,6 @@
#include "wled.h"
#include <Arduino.h>
#include <Wire.h>
#include <Adafruit_Sensor.h>
#include <Adafruit_BMP280.h>
#include <Adafruit_CCS811.h>
@ -16,14 +15,6 @@ Adafruit_BMP280 bmp;
Adafruit_Si7021 si7021;
Adafruit_CCS811 ccs811;
#ifdef ARDUINO_ARCH_ESP32 //ESP32 boards
uint8_t SCL_PIN = 22;
uint8_t SDA_PIN = 21;
#else //ESP8266 boards
uint8_t SCL_PIN = 5;
uint8_t SDA_PIN = 4;
#endif
class UserMod_SensorsToMQTT : public Usermod
{
private:
@ -231,7 +222,6 @@ public:
void setup()
{
Serial.println("Starting!");
Wire.begin(SDA_PIN, SCL_PIN);
Serial.println("Initializing sensors.. ");
_initialize();
}

717
usermods/usermod_v2_four_line_display_ALT/usermod_v2_four_line_display_ALT.h
View File

File diff suppressed because it is too large Load Diff

535
usermods/usermod_v2_rotary_encoder_ui_ALT/usermod_v2_rotary_encoder_ui_ALT.h
View File

@ -45,7 +45,19 @@
#define ENCODER_SW_PIN 19
#endif
// The last UI state, remove color and saturation option if diplay not active(too many options)
#ifndef USERMOD_USE_PCF8574
#undef USE_PCF8574
#define USE_PCF8574 false
#else
#undef USE_PCF8574
#define USE_PCF8574 true
#endif
#ifndef PCF8574_ADDRESS
#define PCF8574_ADDRESS 0x20 // some may start at 0x38
#endif
// The last UI state, remove color and saturation option if display not active (too many options)
#ifdef USERMOD_FOUR_LINE_DISPLAY
#define LAST_UI_STATE 11
#else
@ -114,61 +126,67 @@ static int re_qstringCmp(const void *ap, const void *bp) {
class RotaryEncoderUIUsermod : public Usermod {
private:
int8_t fadeAmount = 5; // Amount to change every step (brightness)
private:
const int8_t fadeAmount; // Amount to change every step (brightness)
unsigned long loopTime;
unsigned long buttonPressedTime = 0;
unsigned long buttonWaitTime = 0;
bool buttonPressedBefore = false;
bool buttonLongPressed = false;
unsigned long buttonPressedTime;
unsigned long buttonWaitTime;
bool buttonPressedBefore;
bool buttonLongPressed;
int8_t pinA = ENCODER_DT_PIN; // DT from encoder
int8_t pinB = ENCODER_CLK_PIN; // CLK from encoder
int8_t pinC = ENCODER_SW_PIN; // SW from encoder
int8_t pinA; // DT from encoder
int8_t pinB; // CLK from encoder
int8_t pinC; // SW from encoder
unsigned char select_state = 0; // 0: brightness, 1: effect, 2: effect speed, ...
unsigned char select_state; // 0: brightness, 1: effect, 2: effect speed, ...
uint16_t currentHue1 = 16; // default boot color
byte currentSat1 = 255;
uint16_t currentHue1; // default boot color
byte currentSat1;
uint8_t currentCCT;
#ifdef USERMOD_FOUR_LINE_DISPLAY
#ifdef USERMOD_FOUR_LINE_DISPLAY
FourLineDisplayUsermod *display;
#else
void* display = nullptr;
#endif
#else
void* display;
#endif
// Pointers the start of the mode names within JSON_mode_names
const char **modes_qstrings = nullptr;
const char **modes_qstrings;
// Array of mode indexes in alphabetical order.
byte *modes_alpha_indexes = nullptr;
byte *modes_alpha_indexes;
// Pointers the start of the palette names within JSON_palette_names
const char **palettes_qstrings = nullptr;
const char **palettes_qstrings;
// Array of palette indexes in alphabetical order.
byte *palettes_alpha_indexes = nullptr;
byte *palettes_alpha_indexes;
unsigned char Enc_A;
unsigned char Enc_B;
unsigned char Enc_A_prev = 0;
struct { // reduce memory footprint
bool Enc_A : 1;
bool Enc_B : 1;
bool Enc_A_prev : 1;
};
bool currentEffectAndPaletteInitialized = false;
uint8_t effectCurrentIndex = 0;
uint8_t effectPaletteIndex = 0;
uint8_t knownMode = 0;
uint8_t knownPalette = 0;
bool currentEffectAndPaletteInitialized;
uint8_t effectCurrentIndex;
uint8_t effectPaletteIndex;
uint8_t knownMode;
uint8_t knownPalette;
uint8_t currentCCT = 128;
byte presetHigh;
byte presetLow;
byte presetHigh = 0;
byte presetLow = 0;
bool applyToAll;
bool applyToAll = true;
bool initDone;
bool enabled;
bool initDone = false;
bool enabled = true;
bool usePcf8574;
uint8_t addrPcf8574;
// strings to reduce flash memory usage (used more than twice)
static const char _name[];
@ -179,12 +197,184 @@ private:
static const char _presetHigh[];
static const char _presetLow[];
static const char _applyToAll[];
static const char _pcf8574[];
static const char _pcfAddress[];
/**
* readPin() - read rotary encoder pin value
*/
byte readPin(uint8_t pin);
/**
* Sort the modes and palettes to the index arrays
* modes_alpha_indexes and palettes_alpha_indexes.
*/
void sortModesAndPalettes() {
void sortModesAndPalettes();
byte *re_initIndexArray(int numModes);
/**
* Return an array of mode or palette names from the JSON string.
* They don't end in '\0', they end in '"'.
*/
const char **re_findModeStrings(const char json[], int numModes);
/**
* Sort either the modes or the palettes using quicksort.
*/
void re_sortModes(const char **modeNames, byte *indexes, int count, int numSkip);
public:
RotaryEncoderUIUsermod()
: fadeAmount(5)
, buttonPressedTime(0)
, buttonWaitTime(0)
, buttonPressedBefore(false)
, buttonLongPressed(false)
, pinA(ENCODER_DT_PIN)
, pinB(ENCODER_CLK_PIN)
, pinC(ENCODER_SW_PIN)
, select_state(0)
, currentHue1(16)
, currentSat1(255)
, currentCCT(128)
, display(nullptr)
, modes_qstrings(nullptr)
, modes_alpha_indexes(nullptr)
, palettes_qstrings(nullptr)
, palettes_alpha_indexes(nullptr)
, currentEffectAndPaletteInitialized(false)
, effectCurrentIndex(0)
, effectPaletteIndex(0)
, knownMode(0)
, knownPalette(0)
, presetHigh(0)
, presetLow(0)
, applyToAll(true)
, initDone(false)
, enabled(true)
, usePcf8574(USE_PCF8574)
, addrPcf8574(PCF8574_ADDRESS)
{}
/*
* getId() allows you to optionally give your V2 usermod an unique ID (please define it in const.h!).
* This could be used in the future for the system to determine whether your usermod is installed.
*/
uint16_t getId() { return USERMOD_ID_ROTARY_ENC_UI; }
/**
* Enable/Disable the usermod
*/
inline void enable(bool enable) { enabled = enable; }
/**
* Get usermod enabled/disabled state
*/
inline bool isEnabled() { return enabled; }
/**
* setup() is called once at boot. WiFi is not yet connected at this point.
* You can use it to initialize variables, sensors or similar.
*/
void setup();
/**
* connected() is called every time the WiFi is (re)connected
* Use it to initialize network interfaces
*/
//void connected();
/**
* loop() is called continuously. Here you can check for events, read sensors, etc.
*/
void loop();
#ifndef WLED_DISABLE_MQTT
//bool onMqttMessage(char* topic, char* payload);
//void onMqttConnect(bool sessionPresent);
#endif
/**
* handleButton() can be used to override default button behaviour. Returning true
* will prevent button working in a default way.
* Replicating button.cpp
*/
//bool handleButton(uint8_t b);
/**
* addToJsonInfo() can be used to add custom entries to the /json/info part of the JSON API.
*/
//void addToJsonInfo(JsonObject &root);
/**
* addToJsonState() can be used to add custom entries to the /json/state part of the JSON API (state object).
* Values in the state object may be modified by connected clients
*/
//void addToJsonState(JsonObject &root);
/**
* readFromJsonState() can be used to receive data clients send to the /json/state part of the JSON API (state object).
* Values in the state object may be modified by connected clients
*/
//void readFromJsonState(JsonObject &root);
/**
* provide the changeable values
*/
void addToConfig(JsonObject &root);
//void appendConfigData();
/**
* restore the changeable values
* readFromConfig() is called before setup() to populate properties from values stored in cfg.json
*
* The function should return true if configuration was successfully loaded or false if there was no configuration.
*/
bool readFromConfig(JsonObject &root);
// custom methods
void displayNetworkInfo();
void findCurrentEffectAndPalette();
bool changeState(const char *stateName, byte markedLine, byte markedCol, byte glyph);
void lampUdated();
void changeBrightness(bool increase);
void changeEffect(bool increase);
void changeEffectSpeed(bool increase);
void changeEffectIntensity(bool increase);
void changeCustom(uint8_t par, bool increase);
void changePalette(bool increase);
void changeHue(bool increase);
void changeSat(bool increase);
void changePreset(bool increase);
void changeCCT(bool increase);
};
/**
* readPin() - read rotary encoder pin value
*/
byte RotaryEncoderUIUsermod::readPin(uint8_t pin) {
if (usePcf8574) {
byte _data = 0;
if (pin < 8) {
Wire.requestFrom(addrPcf8574, 1U);
if (Wire.available()) {
_data = Wire.read();
_data = (_data>>pin) & 1;
}
}
return _data;
} else {
return digitalRead(pin);
}
}
/**
* Sort the modes and palettes to the index arrays
* modes_alpha_indexes and palettes_alpha_indexes.
*/
void RotaryEncoderUIUsermod::sortModesAndPalettes() {
//modes_qstrings = re_findModeStrings(JSON_mode_names, strip.getModeCount());
modes_qstrings = strip.getModeDataSrc();
modes_alpha_indexes = re_initIndexArray(strip.getModeCount());
@ -198,21 +388,21 @@ private:
int skipPaletteCount = 1;
while (pgm_read_byte_near(palettes_qstrings[skipPaletteCount++]) == '*') ;
re_sortModes(palettes_qstrings, palettes_alpha_indexes, strip.getPaletteCount(), skipPaletteCount);
}
}
byte *re_initIndexArray(int numModes) {
byte *RotaryEncoderUIUsermod::re_initIndexArray(int numModes) {
byte *indexes = (byte *)malloc(sizeof(byte) * numModes);
for (byte i = 0; i < numModes; i++) {
indexes[i] = i;
}
return indexes;
}
}
/**
/**
* Return an array of mode or palette names from the JSON string.
* They don't end in '\0', they end in '"'.
*/
const char **re_findModeStrings(const char json[], int numModes) {
const char **RotaryEncoderUIUsermod::re_findModeStrings(const char json[], int numModes) {
const char **modeStrings = (const char **)malloc(sizeof(const char *) * numModes);
uint8_t modeIndex = 0;
bool insideQuotes = false;
@ -245,27 +435,31 @@ private:
if (complete) break;
}
return modeStrings;
}
}
/**
/**
* Sort either the modes or the palettes using quicksort.
*/
void re_sortModes(const char **modeNames, byte *indexes, int count, int numSkip) {
void RotaryEncoderUIUsermod::re_sortModes(const char **modeNames, byte *indexes, int count, int numSkip) {
if (!modeNames) return;
listBeingSorted = modeNames;
qsort(indexes + numSkip, count - numSkip, sizeof(byte), re_qstringCmp);
listBeingSorted = nullptr;
}
}
public:
/*
// public methods
/*
* setup() is called once at boot. WiFi is not yet connected at this point.
* You can use it to initialize variables, sensors or similar.
*/
void setup()
{
void RotaryEncoderUIUsermod::setup()
{
DEBUG_PRINTLN(F("Usermod Rotary Encoder init."));
if (!usePcf8574) {
PinManagerPinType pins[3] = { { pinA, false }, { pinB, false }, { pinC, false } };
if (!pinManager.allocateMultiplePins(pins, 3, PinOwner::UM_RotaryEncoderUI)) {
// BUG: configuring this usermod with conflicting pins
@ -284,6 +478,12 @@ public:
pinMode(pinA, USERMOD_ROTARY_ENCODER_GPIO);
pinMode(pinB, USERMOD_ROTARY_ENCODER_GPIO);
pinMode(pinC, USERMOD_ROTARY_ENCODER_GPIO);
} else {
if ((i2c_sda == i2c_scl && i2c_sda == -1) || pinA<0 || pinB<0 || pinC<0) {
enabled = false;
return;
}
}
loopTime = millis();
@ -301,21 +501,12 @@ public:
#endif
initDone = true;
Enc_A = digitalRead(pinA); // Read encoder pins
Enc_B = digitalRead(pinB);
Enc_A = readPin(pinA); // Read encoder pins
Enc_B = readPin(pinB);
Enc_A_prev = Enc_A;
}
}
/*
* connected() is called every time the WiFi is (re)connected
* Use it to initialize network interfaces
*/
void connected()
{
//Serial.println("Connected to WiFi!");
}
/*
/*
* loop() is called continuously. Here you can check for events, read sensors, etc.
*
* Tips:
@ -325,8 +516,8 @@ public:
* 2. Try to avoid using the delay() function. NEVER use delays longer than 10 milliseconds.
* Instead, use a timer check as shown here.
*/
void loop()
{
void RotaryEncoderUIUsermod::loop()
{
if (!enabled || strip.isUpdating()) return;
unsigned long currentTime = millis(); // get the current elapsed time
@ -346,7 +537,7 @@ public:
{
loopTime = currentTime; // Updates loopTime
bool buttonPressed = !digitalRead(pinC); //0=pressed, 1=released
bool buttonPressed = !readPin(pinC); //0=pressed, 1=released
if (buttonPressed) {
if (!buttonPressedBefore) buttonPressedTime = currentTime;
buttonPressedBefore = true;
@ -413,8 +604,8 @@ public:
if (changedState) select_state = newState;
}
Enc_A = digitalRead(pinA); // Read encoder pins
Enc_B = digitalRead(pinB);
Enc_A = readPin(pinA); // Read encoder pins
Enc_B = readPin(pinB);
if ((Enc_A) && (!Enc_A_prev))
{ // A has gone from high to low
if (Enc_B == LOW) //changes to LOW so that then encoder registers a change at the very end of a pulse
@ -454,15 +645,15 @@ public:
}
Enc_A_prev = Enc_A; // Store value of A for next time
}
}
}
void displayNetworkInfo() {
void RotaryEncoderUIUsermod::displayNetworkInfo() {
#ifdef USERMOD_FOUR_LINE_DISPLAY
display->networkOverlay(PSTR("NETWORK INFO"), 10000);
#endif
}
}
void findCurrentEffectAndPalette() {
void RotaryEncoderUIUsermod::findCurrentEffectAndPalette() {
currentEffectAndPaletteInitialized = true;
for (uint8_t i = 0; i < strip.getModeCount(); i++) {
if (modes_alpha_indexes[i] == effectCurrent) {
@ -477,10 +668,10 @@ public:
break;
}
}
}
}
boolean changeState(const char *stateName, byte markedLine, byte markedCol, byte glyph) {
#ifdef USERMOD_FOUR_LINE_DISPLAY
bool RotaryEncoderUIUsermod::changeState(const char *stateName, byte markedLine, byte markedCol, byte glyph) {
#ifdef USERMOD_FOUR_LINE_DISPLAY
if (display != nullptr) {
if (display->wakeDisplay()) {
// Throw away wake up input
@ -490,44 +681,44 @@ public:
display->overlay(stateName, 750, glyph);
display->setMarkLine(markedLine, markedCol);
}
#endif
#endif
return true;
}
}
void lampUdated() {
void RotaryEncoderUIUsermod::lampUdated() {
//call for notifier -> 0: init 1: direct change 2: button 3: notification 4: nightlight 5: other (No notification)
// 6: fx changed 7: hue 8: preset cycle 9: blynk 10: alexa
//setValuesFromFirstSelectedSeg(); //to make transition work on main segment (should no longer be required)
stateUpdated(CALL_MODE_BUTTON);
updateInterfaces(CALL_MODE_BUTTON);
}
}
void changeBrightness(bool increase) {
#ifdef USERMOD_FOUR_LINE_DISPLAY
void RotaryEncoderUIUsermod::changeBrightness(bool increase) {
#ifdef USERMOD_FOUR_LINE_DISPLAY
if (display && display->wakeDisplay()) {
display->redraw(true);
// Throw away wake up input
return;
}
display->updateRedrawTime();
#endif
#endif
bri = max(min((increase ? bri+fadeAmount : bri-fadeAmount), 255), 0);
lampUdated();
#ifdef USERMOD_FOUR_LINE_DISPLAY
#ifdef USERMOD_FOUR_LINE_DISPLAY
display->updateBrightness();
#endif
}
#endif
}
void changeEffect(bool increase) {
#ifdef USERMOD_FOUR_LINE_DISPLAY
void RotaryEncoderUIUsermod::changeEffect(bool increase) {
#ifdef USERMOD_FOUR_LINE_DISPLAY
if (display && display->wakeDisplay()) {
display->redraw(true);
// Throw away wake up input
return;
}
display->updateRedrawTime();
#endif
#endif
effectCurrentIndex = max(min((increase ? effectCurrentIndex+1 : effectCurrentIndex-1), strip.getModeCount()-1), 0);
effectCurrent = modes_alpha_indexes[effectCurrentIndex];
stateChanged = true;
@ -542,21 +733,21 @@ public:
seg.setMode(effectCurrent);
}
lampUdated();
#ifdef USERMOD_FOUR_LINE_DISPLAY
#ifdef USERMOD_FOUR_LINE_DISPLAY
display->showCurrentEffectOrPalette(effectCurrent, JSON_mode_names, 3);
#endif
}
#endif
}
void changeEffectSpeed(bool increase) {
#ifdef USERMOD_FOUR_LINE_DISPLAY
void RotaryEncoderUIUsermod::changeEffectSpeed(bool increase) {
#ifdef USERMOD_FOUR_LINE_DISPLAY
if (display && display->wakeDisplay()) {
display->redraw(true);
// Throw away wake up input
return;
}
display->updateRedrawTime();
#endif
#endif
effectSpeed = max(min((increase ? effectSpeed+fadeAmount : effectSpeed-fadeAmount), 255), 0);
stateChanged = true;
if (applyToAll) {
@ -570,21 +761,21 @@ public:
seg.speed = effectSpeed;
}
lampUdated();
#ifdef USERMOD_FOUR_LINE_DISPLAY
#ifdef USERMOD_FOUR_LINE_DISPLAY
display->updateSpeed();
#endif
}
#endif
}
void changeEffectIntensity(bool increase) {
#ifdef USERMOD_FOUR_LINE_DISPLAY
void RotaryEncoderUIUsermod::changeEffectIntensity(bool increase) {
#ifdef USERMOD_FOUR_LINE_DISPLAY
if (display && display->wakeDisplay()) {
display->redraw(true);
// Throw away wake up input
return;
}
display->updateRedrawTime();
#endif
#endif
effectIntensity = max(min((increase ? effectIntensity+fadeAmount : effectIntensity-fadeAmount), 255), 0);
stateChanged = true;
if (applyToAll) {
@ -598,22 +789,22 @@ public:
seg.intensity = effectIntensity;
}
lampUdated();
#ifdef USERMOD_FOUR_LINE_DISPLAY
#ifdef USERMOD_FOUR_LINE_DISPLAY
display->updateIntensity();
#endif
}
#endif
}
void changeCustom(uint8_t par, bool increase) {
void RotaryEncoderUIUsermod::changeCustom(uint8_t par, bool increase) {
uint8_t val = 0;
#ifdef USERMOD_FOUR_LINE_DISPLAY
#ifdef USERMOD_FOUR_LINE_DISPLAY
if (display && display->wakeDisplay()) {
display->redraw(true);
// Throw away wake up input
return;
}
display->updateRedrawTime();
#endif
#endif
stateChanged = true;
if (applyToAll) {
uint8_t id = strip.getFirstSelectedSegId();
@ -641,23 +832,23 @@ public:
}
}
lampUdated();
#ifdef USERMOD_FOUR_LINE_DISPLAY
#ifdef USERMOD_FOUR_LINE_DISPLAY
char lineBuffer[64];
sprintf(lineBuffer, "%d", val);
display->overlay(lineBuffer, 500, 10); // use star
#endif
}
#endif
}
void changePalette(bool increase) {
#ifdef USERMOD_FOUR_LINE_DISPLAY
void RotaryEncoderUIUsermod::changePalette(bool increase) {
#ifdef USERMOD_FOUR_LINE_DISPLAY
if (display && display->wakeDisplay()) {
display->redraw(true);
// Throw away wake up input
return;
}
display->updateRedrawTime();
#endif
#endif
effectPaletteIndex = max(min((increase ? effectPaletteIndex+1 : effectPaletteIndex-1), strip.getPaletteCount()-1), 0);
effectPalette = palettes_alpha_indexes[effectPaletteIndex];
stateChanged = true;
@ -672,21 +863,21 @@ public:
seg.setPalette(effectPalette);
}
lampUdated();
#ifdef USERMOD_FOUR_LINE_DISPLAY
#ifdef USERMOD_FOUR_LINE_DISPLAY
display->showCurrentEffectOrPalette(effectPalette, JSON_palette_names, 2);
#endif
}
#endif
}
void changeHue(bool increase){
#ifdef USERMOD_FOUR_LINE_DISPLAY
void RotaryEncoderUIUsermod::changeHue(bool increase){
#ifdef USERMOD_FOUR_LINE_DISPLAY
if (display && display->wakeDisplay()) {
display->redraw(true);
// Throw away wake up input
return;
}
display->updateRedrawTime();
#endif
#endif
currentHue1 = max(min((increase ? currentHue1+fadeAmount : currentHue1-fadeAmount), 255), 0);
colorHStoRGB(currentHue1*256, currentSat1, col);
stateChanged = true;
@ -701,22 +892,22 @@ public:
seg.colors[0] = RGBW32(col[0], col[1], col[2], col[3]);
}
lampUdated();
#ifdef USERMOD_FOUR_LINE_DISPLAY
#ifdef USERMOD_FOUR_LINE_DISPLAY
char lineBuffer[64];
sprintf(lineBuffer, "%d", currentHue1);
display->overlay(lineBuffer, 500, 7); // use brush
#endif
}
#endif
}
void changeSat(bool increase){
#ifdef USERMOD_FOUR_LINE_DISPLAY
void RotaryEncoderUIUsermod::changeSat(bool increase){
#ifdef USERMOD_FOUR_LINE_DISPLAY
if (display && display->wakeDisplay()) {
display->redraw(true);
// Throw away wake up input
return;
}
display->updateRedrawTime();
#endif
#endif
currentSat1 = max(min((increase ? currentSat1+fadeAmount : currentSat1-fadeAmount), 255), 0);
colorHStoRGB(currentHue1*256, currentSat1, col);
if (applyToAll) {
@ -730,22 +921,22 @@ public:
seg.colors[0] = RGBW32(col[0], col[1], col[2], col[3]);
}
lampUdated();
#ifdef USERMOD_FOUR_LINE_DISPLAY
#ifdef USERMOD_FOUR_LINE_DISPLAY
char lineBuffer[64];
sprintf(lineBuffer, "%d", currentSat1);
display->overlay(lineBuffer, 500, 8); // use contrast
#endif
}
#endif
}
void changePreset(bool increase) {
#ifdef USERMOD_FOUR_LINE_DISPLAY
void RotaryEncoderUIUsermod::changePreset(bool increase) {
#ifdef USERMOD_FOUR_LINE_DISPLAY
if (display && display->wakeDisplay()) {
display->redraw(true);
// Throw away wake up input
return;
}
display->updateRedrawTime();
#endif
#endif
if (presetHigh && presetLow && presetHigh > presetLow) {
StaticJsonDocument<64> root;
char str[64];
@ -767,17 +958,17 @@ public:
display->overlay(str, 500, 11); // use heart
#endif
}
}
}
void changeCCT(bool increase){
#ifdef USERMOD_FOUR_LINE_DISPLAY
void RotaryEncoderUIUsermod::changeCCT(bool increase){
#ifdef USERMOD_FOUR_LINE_DISPLAY
if (display && display->wakeDisplay()) {
display->redraw(true);
// Throw away wake up input
return;
}
display->updateRedrawTime();
#endif
#endif
currentCCT = max(min((increase ? currentCCT+fadeAmount : currentCCT-fadeAmount), 255), 0);
// if (applyToAll) {
for (byte i=0; i<strip.getSegmentsNum(); i++) {
@ -790,21 +981,21 @@ public:
// seg.setCCT(currentCCT, strip.getMainSegmentId());
// }
lampUdated();
#ifdef USERMOD_FOUR_LINE_DISPLAY
#ifdef USERMOD_FOUR_LINE_DISPLAY
char lineBuffer[64];
sprintf(lineBuffer, "%d", currentCCT);
display->overlay(lineBuffer, 500, 10); // use star
#endif
}
#endif
}
/*
/*
* addToJsonInfo() can be used to add custom entries to the /json/info part of the JSON API.
* Creating an "u" object allows you to add custom key/value pairs to the Info section of the WLED web UI.
* Below it is shown how this could be used for e.g. a light sensor
*/
/*
void addToJsonInfo(JsonObject& root)
{
/*
void RotaryEncoderUIUsermod::addToJsonInfo(JsonObject& root)
{
int reading = 20;
//this code adds "u":{"Light":[20," lux"]} to the info object
JsonObject user = root["u"];
@ -812,36 +1003,36 @@ public:
JsonArray lightArr = user.createNestedArray("Light"); //name
lightArr.add(reading); //value
lightArr.add(" lux"); //unit
}
*/
}
*/
/*
/*
* addToJsonState() can be used to add custom entries to the /json/state part of the JSON API (state object).
* Values in the state object may be modified by connected clients
*/
/*
void addToJsonState(JsonObject &root)
{
/*
void RotaryEncoderUIUsermod::addToJsonState(JsonObject &root)
{
//root["user0"] = userVar0;
}
*/
}
*/
/*
/*
* readFromJsonState() can be used to receive data clients send to the /json/state part of the JSON API (state object).
* Values in the state object may be modified by connected clients
*/
/*
void readFromJsonState(JsonObject &root)
{
/*
void RotaryEncoderUIUsermod::readFromJsonState(JsonObject &root)
{
//userVar0 = root["user0"] | userVar0; //if "user0" key exists in JSON, update, else keep old value
//if (root["bri"] == 255) Serial.println(F("Don't burn down your garage!"));
}
*/
}
*/
/**
/**
* addToConfig() (called from set.cpp) stores persistent properties to cfg.json
*/
void addToConfig(JsonObject &root) {
void RotaryEncoderUIUsermod::addToConfig(JsonObject &root) {
// we add JSON object: {"Rotary-Encoder":{"DT-pin":12,"CLK-pin":14,"SW-pin":13}}
JsonObject top = root.createNestedObject(FPSTR(_name)); // usermodname
top[FPSTR(_enabled)] = enabled;
@ -851,15 +1042,21 @@ public:
top[FPSTR(_presetLow)] = presetLow;
top[FPSTR(_presetHigh)] = presetHigh;
top[FPSTR(_applyToAll)] = applyToAll;
top[FPSTR(_pcf8574)] = usePcf8574;
top[FPSTR(_pcfAddress)] = addrPcf8574;
DEBUG_PRINTLN(F("Rotary Encoder config saved."));
}
}
/**
//void RotaryEncoderUIUsermod::appendConfigData() {
// oappend(SET_F("addInfo('RotaryEncoderUIUsermod:PCF8574-address',1,'<i>(not hex!)</i>');"));
//}
/**
* readFromConfig() is called before setup() to populate properties from values stored in cfg.json
*
* The function should return true if configuration was successfully loaded or false if there was no configuration.
*/
bool readFromConfig(JsonObject &root) {
bool RotaryEncoderUIUsermod::readFromConfig(JsonObject &root) {
// we look for JSON object: {"Rotary-Encoder":{"DT-pin":12,"CLK-pin":14,"SW-pin":13}}
JsonObject top = root[FPSTR(_name)];
if (top.isNull()) {
@ -879,6 +1076,9 @@ public:
enabled = top[FPSTR(_enabled)] | enabled;
applyToAll = top[FPSTR(_applyToAll)] | applyToAll;
usePcf8574 = top[FPSTR(_pcf8574)] | usePcf8574;
addrPcf8574 = top[FPSTR(_pcfAddress)] | addrPcf8574;
DEBUG_PRINT(FPSTR(_name));
if (!initDone) {
// first run: reading from cfg.json
@ -890,12 +1090,14 @@ public:
DEBUG_PRINTLN(F(" config (re)loaded."));
// changing parameters from settings page
if (pinA!=newDTpin || pinB!=newCLKpin || pinC!=newSWpin) {
if (!usePcf8574) {
pinManager.deallocatePin(pinA, PinOwner::UM_RotaryEncoderUI);
pinManager.deallocatePin(pinB, PinOwner::UM_RotaryEncoderUI);
pinManager.deallocatePin(pinC, PinOwner::UM_RotaryEncoderUI);
pinA = newDTpin;
pinB = newCLKpin;
pinC = newSWpin;
}
if (pinA<0 || pinB<0 || pinC<0) {
enabled = false;
return true;
@ -904,18 +1106,9 @@ public:
}
}
// use "return !top["newestParameter"].isNull();" when updating Usermod with new features
return !top[FPSTR(_applyToAll)].isNull();
}
return !top[FPSTR(_pcf8574)].isNull();
}
/*
* getId() allows you to optionally give your V2 usermod an unique ID (please define it in const.h!).
* This could be used in the future for the system to determine whether your usermod is installed.
*/
uint16_t getId()
{
return USERMOD_ID_ROTARY_ENC_UI;
}
};
// strings to reduce flash memory usage (used more than twice)
const char RotaryEncoderUIUsermod::_name[] PROGMEM = "Rotary-Encoder";
@ -926,3 +1119,5 @@ const char RotaryEncoderUIUsermod::_SW_pin[] PROGMEM = "SW-pin";
const char RotaryEncoderUIUsermod::_presetHigh[] PROGMEM = "preset-high";
const char RotaryEncoderUIUsermod::_presetLow[] PROGMEM = "preset-low";
const char RotaryEncoderUIUsermod::_applyToAll[] PROGMEM = "apply-2-all-seg";
const char RotaryEncoderUIUsermod::_pcf8574[] PROGMEM = "use-PCF8574";
const char RotaryEncoderUIUsermod::_pcfAddress[] PROGMEM = "PCF8574-address";

6
wled00/cfg.cpp
View File

@ -297,9 +297,11 @@ bool deserializeConfig(JsonObject doc, bool fromFS) {
PinManagerPinType i2c[2] = { { i2c_sda, true }, { i2c_scl, true } };
if (i2c_scl >= 0 && i2c_sda >= 0 && pinManager.allocateMultiplePins(i2c, 2, PinOwner::HW_I2C)) {
#ifdef ESP32
Wire.setPins(i2c_sda, i2c_scl); // this will fail if Wire is initilised (Wire.begin() called prior)
if (!Wire.setPins(i2c_sda, i2c_scl)) { i2c_scl = i2c_sda = -1; } // this will fail if Wire is initilised (Wire.begin() called prior)
else Wire.begin();
#else
Wire.begin(i2c_sda, i2c_scl);
#endif
Wire.begin();
} else {
i2c_sda = -1;
i2c_scl = -1;

32
wled00/data/index.css
View File

@ -410,6 +410,7 @@ button {
position: -webkit-sticky;
position: sticky;
bottom: 0;
max-width: 300px;
}
#sliders .labels {
@ -418,7 +419,7 @@ button {
}
.slider {
max-width: 300px;
/*max-width: 300px;*/
/* margin: 5px auto; add 5px; if you want some vertical space but looks ugly */
border-radius: 24px;
position: relative;
@ -434,12 +435,16 @@ button {
z-index: 0;
}
#sliders .slider {
padding-right: 64px; /* offset for bubble */
}
#sliders .slider, #info .slider {
background-color: var(--c-2);
}
#sliders .sliderwrap, .sbs .sliderwrap {
left: 16px; /* offset for icon */
left: 32px; /* offset for icon */
}
.filter, .option {
@ -685,18 +690,19 @@ img {
.sliderbubble {
width: 24px;
position: relative;
position: absolute;
display: inline-block;
border-radius: 10px;
border-radius: 16px;
background: var(--c-3);
color: var(--c-f);
padding: 2px 4px;
padding: 4px;
font-size: 14px;
right: 3px;
transition: visibility 0.25s ease, opacity 0.25s ease;
right: 6px;
transition: visibility .25s ease,opacity .25s ease;
opacity: 0;
visibility: hidden;
left: 8px;
/* left: 8px; */
top: 4px;
}
output.sliderbubbleshow {
@ -1022,8 +1028,9 @@ textarea {
/* segment power wrapper */
.sbs {
padding: 1px 0 1px 20px;
/*padding: 1px 0 1px 20px;*/
display: var(--sgp);
width: 100%;
}
.pname {
@ -1538,8 +1545,11 @@ TD .checkmark, TD .radiomark {
#sliders .sliderbubble {
display: none;
}
.sliderwrap {
width: calc(100% - 28px);
#sliders .sliderwrap, .sbs .sliderwrap {
width: calc(100% - 42px);
}
#sliders .slider {
padding-right: 0;
}
#sliders .sliderwrap {
left: 12px;

3
wled00/data/index.js
View File

@ -497,6 +497,7 @@ function loadFX(callback = null)
populateEffects();
})
.catch((e)=>{
//setTimeout(loadFX, 250); // retry
showToast(e, true);
})
.finally(()=>{
@ -524,6 +525,7 @@ function loadFXData(callback = null)
})
.catch((e)=>{
fxdata = [];
//setTimeout(loadFXData, 250); // retry
showToast(e, true);
})
.finally(()=>{
@ -1253,6 +1255,7 @@ function updateSelectedFx()
// hide non-0D effects if segment only has 1 pixel (0D)
var fxs = parent.querySelectorAll('.lstI');
for (const fx of fxs) {
if (!fx.dataset.opt) continue;
let opts = fx.dataset.opt.split(";");
if (fx.dataset.id>0) {
if (segLmax==0) fx.classList.add('hide'); // none of the segments selected (hide all effects)

2
wled00/data/settings_2D.htm
View File

@ -322,7 +322,7 @@ Y:<input name="P${i}Y" type="number" min="0" max="255" value="0" oninput="UI()">
<option value="1">Vertical</option>
</select><br>
Serpentine: <input type="checkbox" name="PS"><br>
<i style="color:#fa0;">Pressing Populate will create LED panel layout with pre-arranged matrix.<br>Values above <i>will not</i> affect final layout.<br>
<i class="warn">Pressing Populate will create LED panel layout with pre-arranged matrix.<br>Values above <i>will not</i> affect final layout.<br>
WARNING: You may need to update each panel parameters after they are generated.</i><br>
<button type="button" onclick="gen();expand(gId('expGen'),gId('mxGen'));">Populate</button>
</div>

4
wled00/data/settings_leds.htm
View File

@ -576,7 +576,7 @@ Length: <input type="number" name="XC${i}" id="xc${i}" class="l" min="1" max="65
Enable automatic brightness limiter: <input type="checkbox" name="ABen" onchange="enABL()" id="able"><br>
<div id="abl">
Maximum Current: <input name="MA" type="number" class="l" min="250" max="65000" oninput="UI()" required> mA<br>
<div id="ampwarning" style="color: orange; display: none;">
<div id="ampwarning" class="warn" style="display: none;">
&#9888; Your power supply provides high current.<br>
To improve the safety of your setup,<br>
please use thick cables,<br>
@ -604,7 +604,7 @@ Length: <input type="number" name="XC${i}" id="xc${i}" class="l" min="1" max="65
<button type="button" id="-" onclick="addLEDs(-1,false)">-</button><br>
LED Memory Usage: <span id="m0">0</span> / <span id="m1">?</span> B<br>
<div id="dbar" style="display:inline-block; width: 100px; height: 10px; border-radius: 20px;"></div><br>
<div id="ledwarning" style="color: orange; display: none;">
<div id="ledwarning" class="warn" style="display: none;">
&#9888; You might run into stability or lag issues.<br>
Use less than <span id="wreason">800 LEDs per output</span> for the best experience!<br>
</div>

6
wled00/data/settings_sec.htm
View File

@ -89,7 +89,7 @@
</div>
<h2>Security & Update setup</h2>
Settings PIN: <input type="password" id="PIN" name="PIN" size="4" maxlength="4" minlength="4" onkeydown="checkNum(this)" pattern="[0-9]*" inputmode="numeric" title="Please enter a 4 digit number"><br>
<div style="color: #fa0;">&#9888; Unencrypted transmission. Be prudent when selecting PIN, do NOT use your banking, door, SIM, etc. pin!</div><br>
<div class="warn">&#9888; Unencrypted transmission. Be prudent when selecting PIN, do NOT use your banking, door, SIM, etc. pin!</div><br>
Lock wireless (OTA) software update: <input type="checkbox" name="NO"><br>
Passphrase: <input type="password" name="OP" maxlength="32"><br>
To enable OTA, for security reasons you need to also enter the correct password!<br>
@ -99,7 +99,7 @@
Deny access to WiFi settings if locked: <input type="checkbox" name="OW"><br><br>
Factory reset: <input type="checkbox" name="RS"><br>
All settings and presets will be erased.<br><br>
<div style="color: #fa0;">&#9888; Unencrypted transmission. An attacker on the same network can intercept form data!</div>
<div class="warn">&#9888; Unencrypted transmission. An attacker on the same network can intercept form data!</div>
<hr>
<h3>Software Update</h3>
<button type="button" onclick="U()">Manual OTA Update</button><br>
@ -110,7 +110,7 @@
<div>Restore presets<br><input type="file" name="data" accept=".json"> <button type="button" onclick="uploadFile(d.Sf.data,'/presets.json');">Upload</button><br></div><br>
<a class="btn lnk" id="bckpresets" href="/cfg.json" download="cfg">Backup configuration</a><br>
<div>Restore configuration<br><input type="file" name="data2" accept=".json"> <button type="button" onclick="uploadFile(d.Sf.data2,'/cfg.json');">Upload</button><br></div>
<div style="color: #fa0;">&#9888; Restoring presets/configuration will OVERWRITE your current presets/configuration.<br>
<div class="warn">&#9888; Restoring presets/configuration will OVERWRITE your current presets/configuration.<br>
Incorrect configuration may require a factory reset or re-flashing of your ESP.</div>
For security reasons, passwords are not backed up.
<hr>

8
wled00/data/settings_sync.htm
View File

@ -172,7 +172,7 @@ Realtime LED offset: <input name="WO" type="number" min="-255" max="255" require
<hr class="sml">
<h3>Alexa Voice Assistant</h3>
<div id="NoAlexa" class="hide">
<em style="color:#fa0;">This firmware build does not include Alexa support.<br></em><br>
<i class="warn">This firmware build does not include Alexa support.<br></i><br>
</div>
<div id="Alexa">
Emulate Alexa device: <input type="checkbox" name="AL"><br>
@ -180,7 +180,7 @@ Alexa invocation name: <input type="text" name="AI" maxlength="32"><br>
Also emulate devices to call the first <input name="AP" type="number" class="s" min="0" max="9" required> presets<br><br>
</div>
<hr class="sml">
<div style="color: #fa0;">&#9888; <b>MQTT and Hue sync all connect to external hosts!<br>
<div class="warn">&#9888; <b>MQTT and Hue sync all connect to external hosts!<br>
This may impact the responsiveness of WLED.</b><br>
</div>
For best results, only use one of these services at a time.<br>
@ -188,7 +188,7 @@ For best results, only use one of these services at a time.<br>
<hr class="sml">
<h3>MQTT</h3>
<div id="NoMQTT" class="hide">
<em style="color:#fa0;">This firmware build does not include MQTT support.<br></em>
<i class="warn">This firmware build does not include MQTT support.<br></i>
</div>
<div id="MQTT">
Enable MQTT: <input type="checkbox" name="MQ"><br>
@ -207,7 +207,7 @@ Retain brightness & color messages: <input type="checkbox" name="RT"><br>
</div>
<h3>Philips Hue</h3>
<div id="NoHue" class="hide">
<em style="color:#fa0;">This firmware build does not include Philips Hue support.<br></em>
<em class="warn">This firmware build does not include Philips Hue support.<br></em>
</div>
<div id="Hue">
<i>You can find the bridge IP and the light number in the 'About' section of the hue app.</i><br>

2
wled00/data/settings_ui.htm
View File

@ -249,7 +249,7 @@
Server description: <input type="text" name="DS" maxlength="32"><br>
Sync button toggles both send and receive: <input type="checkbox" name="ST"><br>
<div id="NoSimple" class="hide">
<em style="color:#fa0;">This firmware build does not include simplified UI support.<br></em>
<i class="warn">This firmware build does not include simplified UI support.<br></i>
</div>
<div id="Simple">Enable simplified UI: <input type="checkbox" name="SU"><br></div>
<i>The following UI customization settings are unique both to the WLED device and this browser.<br>

6
wled00/data/settings_um.htm
View File

@ -242,15 +242,17 @@
</div>
<h2>Usermod Setup</h2>
Global I<sup>2</sup>C GPIOs (HW)<br>
<i style="color: orange;">(only changable on ESP32, change requires reboot!)</i><br>
<i class="warn">(change requires reboot!)</i><br>
SDA:<input type="number" min="-1" max="48" name="SDA" onchange="check(this,'if')" class="s" placeholder="SDA">
SCL:<input type="number" min="-1" max="48" name="SCL" onchange="check(this,'if')" class="s" placeholder="SCL">
<hr class="sml">
Global SPI GPIOs (HW)<br>
<i style="color: orange;">(only changable on ESP32, change requires reboot!)</i><br>
<i class="warn">(only changable on ESP32, change requires reboot!)</i><br>
MOSI:<input type="number" min="-1" max="48" name="MOSI" onchange="check(this,'if')" class="s" placeholder="MOSI">
MISO:<input type="number" min="-1" max="48" name="MISO" onchange="check(this,'if')" class="s" placeholder="MISO">
SCLK:<input type="number" min="-1" max="48" name="SCLK" onchange="check(this,'if')" class="s" placeholder="SCLK">
<hr class="sml">
Reboot after save? <input type="checkbox" name="RBT"><br>
<div id="um">Loading settings...</div>
<hr><button type="button" onclick="B()">Back</button><button type="submit">Save</button>
</form>

3
wled00/data/style.css
View File

@ -61,6 +61,9 @@ button.sml {
.hide {
display: none;
}
.warn {
color: #fa0;
}
input {
background: #333;
color: #fff;

11
wled00/fcn_declare.h
View File

@ -99,7 +99,7 @@ void onHueData(void* arg, AsyncClient* client, void *data, size_t len);
void handleImprovPacket();
void sendImprovStateResponse(uint8_t state, bool error = false);
void sendImprovInfoResponse();
void sendImprovRPCResponse(uint8_t commandId);
void sendImprovRPCResponse(byte commandId);
//ir.cpp
void applyRepeatActions();
@ -129,8 +129,8 @@ bool deserializeState(JsonObject root, byte callMode = CALL_MODE_DIRECT_CHANGE,
void serializeSegment(JsonObject& root, Segment& seg, byte id, bool forPreset = false, bool segmentBounds = true);
void serializeState(JsonObject root, bool forPreset = false, bool includeBri = true, bool segmentBounds = true, bool selectedSegmentsOnly = false);
void serializeInfo(JsonObject root);
void serializeModeNames(JsonArray arr, const char *qstring);
void serializeModeData(JsonObject root);
void serializeModeNames(JsonArray root);
void serializeModeData(JsonArray root);
void serveJson(AsyncWebServerRequest* request);
#ifdef WLED_ENABLE_JSONLIVE
bool serveLiveLeds(AsyncWebServerRequest* request, uint32_t wsClient = 0);
@ -152,9 +152,11 @@ void handleTransitions();
void handleNightlight();
byte scaledBri(byte in);
#ifdef WLED_ENABLE_LOXONE
//lx_parser.cpp
bool parseLx(int lxValue, byte* rgbw);
void parseLxJson(int lxValue, byte segId, bool secondary);
#endif
//mqtt.cpp
bool initMqtt();
@ -203,7 +205,7 @@ bool handleSet(AsyncWebServerRequest *request, const String& req, bool apply=tru
//udp.cpp
void notify(byte callMode, bool followUp=false);
uint8_t realtimeBroadcast(uint8_t type, IPAddress client, uint16_t length, byte *buffer, uint8_t bri=255, bool isRGBW=false);
uint8_t realtimeBroadcast(uint8_t type, IPAddress client, uint16_t length, uint8_t *buffer, uint8_t bri=255, bool isRGBW=false);
void realtimeLock(uint32_t timeoutMs, byte md = REALTIME_MODE_GENERIC);
void exitRealtime();
void handleNotifications();
@ -372,7 +374,6 @@ void serveIndexOrWelcome(AsyncWebServerRequest *request);
void serveIndex(AsyncWebServerRequest* request);
String msgProcessor(const String& var);
void serveMessage(AsyncWebServerRequest* request, uint16_t code, const String& headl, const String& subl="", byte optionT=255);
String settingsProcessor(const String& var);
String dmxProcessor(const String& var);
void serveSettings(AsyncWebServerRequest* request, bool post = false);
void serveSettingsJS(AsyncWebServerRequest* request);

2162
wled00/html_settings.h
View File

File diff suppressed because it is too large Load Diff

3933
wled00/html_ui.h
View File

File diff suppressed because it is too large Load Diff

35
wled00/json.cpp
View File

@ -9,6 +9,7 @@
#define JSON_PATH_PALETTES 5
#define JSON_PATH_FXDATA 6
#define JSON_PATH_NETWORKS 7
#define JSON_PATH_EFFECTS 8
/*
* JSON API (De)serialization
@ -812,7 +813,7 @@ void setPaletteColors(JsonArray json, byte* tcp)
}
}
void serializePalettes(JsonObject root, AsyncWebServerRequest* request)
void serializePalettes(JsonObject root, int page)
{
byte tcp[72];
#ifdef ESP8266
@ -821,11 +822,6 @@ void serializePalettes(JsonObject root, AsyncWebServerRequest* request)
int itemPerPage = 8;
#endif
int page = 0;
if (request->hasParam("page")) {
page = request->getParam("page")->value().toInt();
}
int palettesCount = strip.getPaletteCount();
int customPalettes = strip.customPalettes.size();
@ -1001,6 +997,7 @@ void serveJson(AsyncWebServerRequest* request)
else if (url.indexOf("info") > 0) subJson = JSON_PATH_INFO;
else if (url.indexOf("si") > 0) subJson = JSON_PATH_STATE_INFO;
else if (url.indexOf("nodes") > 0) subJson = JSON_PATH_NODES;
else if (url.indexOf("eff") > 0) subJson = JSON_PATH_EFFECTS;
else if (url.indexOf("palx") > 0) subJson = JSON_PATH_PALETTES;
else if (url.indexOf("fxda") > 0) subJson = JSON_PATH_FXDATA;
else if (url.indexOf("net") > 0) subJson = JSON_PATH_NETWORKS;
@ -1010,20 +1007,6 @@ void serveJson(AsyncWebServerRequest* request)
return;
}
#endif
else if (url.indexOf(F("eff")) > 0) {
// this serves just effect names without FX data extensions in names
if (requestJSONBufferLock(19)) {
AsyncJsonResponse* response = new AsyncJsonResponse(&doc, true); // array document
JsonArray lDoc = response->getRoot();
serializeModeNames(lDoc); // remove WLED-SR extensions from effect names
response->setLength();
request->send(response);
releaseJSONBufferLock();
} else {
request->send(503, "application/json", F("{\"error\":3}"));
}
return;
}
else if (url.indexOf("pal") > 0) {
request->send_P(200, "application/json", JSON_palette_names);
return;
@ -1040,7 +1023,7 @@ void serveJson(AsyncWebServerRequest* request)
request->send(503, "application/json", F("{\"error\":3}"));
return;
}
AsyncJsonResponse *response = new AsyncJsonResponse(&doc, subJson==6);
AsyncJsonResponse *response = new AsyncJsonResponse(&doc, subJson==JSON_PATH_FXDATA || subJson==JSON_PATH_EFFECTS); // will clear and convert JsonDocument into JsonArray if necessary
JsonVariant lDoc = response->getRoot();
@ -1053,9 +1036,11 @@ void serveJson(AsyncWebServerRequest* request)
case JSON_PATH_NODES:
serializeNodes(lDoc); break;
case JSON_PATH_PALETTES:
serializePalettes(lDoc, request); break;
serializePalettes(lDoc, request->hasParam("page") ? request->getParam("page")->value().toInt() : 0); break;
case JSON_PATH_EFFECTS:
serializeModeNames(lDoc); break;
case JSON_PATH_FXDATA:
serializeModeData(lDoc.as<JsonArray>()); break;
serializeModeData(lDoc); break;
case JSON_PATH_NETWORKS:
serializeNetworks(lDoc); break;
default: //all
@ -1074,7 +1059,9 @@ void serveJson(AsyncWebServerRequest* request)
DEBUG_PRINTF("JSON buffer size: %u for request: %d\n", lDoc.memoryUsage(), subJson);
response->setLength();
size_t len = response->setLength();
DEBUG_PRINT(F("JSON content length: ")); DEBUG_PRINTLN(len);
request->send(response);
releaseJSONBufferLock();
}

2
wled00/lx_parser.cpp
View File

@ -5,7 +5,7 @@
/*
* Parser for Loxone formats
*/
bool parseLx(int lxValue, byte rgbw[4])
bool parseLx(int lxValue, byte* rgbw)
{
DEBUG_PRINT(F("LX: Lox = "));
DEBUG_PRINTLN(lxValue);

32
wled00/set.cpp
View File

@ -462,7 +462,7 @@ void handleSettingsSet(AsyncWebServerRequest *request, byte subPage)
clearEEPROM();
#endif
serveMessage(request, 200, F("All Settings erased."), F("Connect to WLED-AP to setup again"),255);
doReboot = true;
doReboot = true; // may reboot immediately on dual-core system (race condition) which is desireable in this case
}
if (request->hasArg(F("PIN"))) {
@ -539,27 +539,24 @@ void handleSettingsSet(AsyncWebServerRequest *request, byte subPage)
// global I2C & SPI pins
int8_t hw_sda_pin = !request->arg(F("SDA")).length() ? -1 : (int)request->arg(F("SDA")).toInt();
int8_t hw_scl_pin = !request->arg(F("SCL")).length() ? -1 : (int)request->arg(F("SCL")).toInt();
#ifdef ESP8266
// cannot change pins on ESP8266
if (hw_sda_pin >= 0 && hw_sda_pin != HW_PIN_SDA) hw_sda_pin = HW_PIN_SDA;
if (hw_scl_pin >= 0 && hw_scl_pin != HW_PIN_SCL) hw_scl_pin = HW_PIN_SCL;
#endif
if (i2c_sda != hw_sda_pin || i2c_scl != hw_scl_pin) {
// only if pins changed
uint8_t old_i2c[2] = { static_cast<uint8_t>(i2c_scl), static_cast<uint8_t>(i2c_sda) };
pinManager.deallocateMultiplePins(old_i2c, 2, PinOwner::HW_I2C); // just in case deallocation of old pins
PinManagerPinType i2c[2] = { { hw_sda_pin, true }, { hw_scl_pin, true } };
if (hw_sda_pin >= 0 && hw_scl_pin >= 0 && pinManager.allocateMultiplePins(i2c, 2, PinOwner::HW_I2C)) {
i2c_sda = hw_sda_pin;
i2c_scl = hw_scl_pin;
#ifdef ESP32
Wire.setPins(i2c_sda, i2c_scl); // this will fail if Wire is initilised (Wire.begin() called)
#endif
Wire.begin();
// no bus re-initialisation as usermods do not get any notification
//Wire.begin(i2c_sda, i2c_scl);
} else {
// there is no Wire.end()
DEBUG_PRINTLN(F("Could not allocate I2C pins."));
uint8_t i2c[2] = { static_cast<uint8_t>(i2c_scl), static_cast<uint8_t>(i2c_sda) };
pinManager.deallocateMultiplePins(i2c, 2, PinOwner::HW_I2C); // just in case deallocation of old pins
i2c_sda = -1;
i2c_scl = -1;
}
}
int8_t hw_mosi_pin = !request->arg(F("MOSI")).length() ? -1 : (int)request->arg(F("MOSI")).toInt();
int8_t hw_miso_pin = !request->arg(F("MISO")).length() ? -1 : (int)request->arg(F("MISO")).toInt();
int8_t hw_sclk_pin = !request->arg(F("SCLK")).length() ? -1 : (int)request->arg(F("SCLK")).toInt();
@ -569,6 +566,10 @@ void handleSettingsSet(AsyncWebServerRequest *request, byte subPage)
if (hw_miso_pin >= 0 && hw_miso_pin != HW_PIN_MISOSPI) hw_mosi_pin = HW_PIN_MISOSPI;
if (hw_sclk_pin >= 0 && hw_sclk_pin != HW_PIN_CLOCKSPI) hw_sclk_pin = HW_PIN_CLOCKSPI;
#endif
if (spi_mosi != hw_mosi_pin || spi_miso != hw_miso_pin || spi_sclk != hw_sclk_pin) {
// only if pins changed
uint8_t old_spi[3] = { static_cast<uint8_t>(spi_mosi), static_cast<uint8_t>(spi_miso), static_cast<uint8_t>(spi_sclk) };
pinManager.deallocateMultiplePins(old_spi, 3, PinOwner::HW_SPI); // just in case deallocation of old pins
PinManagerPinType spi[3] = { { hw_mosi_pin, true }, { hw_miso_pin, true }, { hw_sclk_pin, true } };
if (hw_mosi_pin >= 0 && hw_sclk_pin >= 0 && pinManager.allocateMultiplePins(spi, 3, PinOwner::HW_SPI)) {
spi_mosi = hw_mosi_pin;
@ -584,12 +585,11 @@ void handleSettingsSet(AsyncWebServerRequest *request, byte subPage)
} else {
//SPI.end();
DEBUG_PRINTLN(F("Could not allocate SPI pins."));
uint8_t spi[3] = { static_cast<uint8_t>(spi_mosi), static_cast<uint8_t>(spi_miso), static_cast<uint8_t>(spi_sclk) };
pinManager.deallocateMultiplePins(spi, 3, PinOwner::HW_SPI); // just in case deallocation of old pins
spi_mosi = -1;
spi_miso = -1;
spi_sclk = -1;
}
}
JsonObject um = doc.createNestedObject("um");
@ -708,7 +708,9 @@ void handleSettingsSet(AsyncWebServerRequest *request, byte subPage)
#endif
lastEditTime = millis();
if (subPage != 2 && !doReboot) doSerializeConfig = true; //serializeConfig(); //do not save if factory reset or LED settings (which are saved after LED re-init)
// do not save if factory reset or LED settings (which are saved after LED re-init)
doSerializeConfig = subPage != 2 && !(subPage == 6 && doReboot);
if (subPage == 8) doReboot = request->hasArg(F("RBT")); // prevent race condition on dual core system (set reboot here, after doSerializeConfig has been set)
#ifndef WLED_DISABLE_ALEXA
if (subPage == 4) alexaInit();
#endif

15
wled00/wled.cpp
View File

@ -73,13 +73,6 @@ void WLED::loop()
handleAlexa();
#endif
yield();
if (doSerializeConfig) serializeConfig();
if (doReboot && !doInitBusses) // if busses have to be inited & saved, wait until next iteration
reset();
if (doCloseFile) {
closeFile();
yield();
@ -169,13 +162,14 @@ void WLED::loop()
strip.finalizeInit(); // also loads default ledmap if present
if (aligned) strip.makeAutoSegments();
else strip.fixInvalidSegments();
yield();
serializeConfig();
doSerializeConfig = true;
}
if (loadLedmap >= 0) {
if (!strip.deserializeMap(loadLedmap) && strip.isMatrix && loadLedmap == 0) strip.setUpMatrix();
loadLedmap = -1;
}
yield();
if (doSerializeConfig) serializeConfig();
yield();
handleWs();
@ -229,6 +223,9 @@ void WLED::loop()
ESP.wdtFeed();
#endif
#endif
if (doReboot && (!doInitBusses || !doSerializeConfig)) // if busses have to be inited & saved, wait until next iteration
reset();
}
void WLED::enableWatchdog() {

2
wled00/wled_server.cpp
View File

@ -611,7 +611,7 @@ void serveSettings(AsyncWebServerRequest* request, bool post)
} else {
if (!s2[0]) strcpy_P(s2, s_redirecting);
serveMessage(request, 200, s, s2, (subPage == 1 || (subPage == 6 && doReboot)) ? 129 : (correctPIN ? 1 : 3));
serveMessage(request, 200, s, s2, (subPage == 1 || ((subPage == 6 || subPage == 8) && doReboot)) ? 129 : (correctPIN ? 1 : 3));
return;
}
}