lba.gitea/WLED
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Ethernet modifications.

Browse Source 
Added fixed Ethernet pins to cfg.json and settings page
This commit is contained in:
Blaz Kristan 2021-08-27 19:48:55 +02:00
parent 63bb05b2d4
commit 849bdc52f6
5 changed files with 45 additions and 48 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
wled00/cfg.cpp
View File

@ -86,7 +86,6 @@ bool deserializeConfig(JsonObject doc, bool fromFS) {
CJSON(strip.ablMilliampsMax, hw_led[F("maxpwr")]);
CJSON(strip.milliampsPerLed, hw_led[F("ledma")]);
//CJSON(strip.reverseMode, hw_led["rev"]);
CJSON(strip.rgbwMode, hw_led[F("rgbwm")]);
JsonArray ins = hw_led["ins"];
@ -137,6 +136,7 @@ bool deserializeConfig(JsonObject doc, bool fromFS) {
// finalization done in beginStrip()
}
if (lC > ledCount) ledCount = lC; // fix incorrect total length (honour analog setup)
if (hw_led["rev"]) busses.getBus(0)->reversed = true; //set 0.11 global reversed setting for first bus
// read multiple button configuration
JsonObject btn_obj = hw["btn"];
@ -519,9 +519,10 @@ void serializeConfig() {
ethernet["type"] = ethernetType;
if (ethernetType != WLED_ETH_NONE && ethernetType < WLED_NUM_ETH_TYPES) {
JsonArray pins = ethernet.createNestedArray("pin");
if (ethernetBoards[ethernetType].eth_power>=0) pins.add(ethernetBoards[ethernetType].eth_power);
if (ethernetBoards[ethernetType].eth_mdc>=0) pins.add(ethernetBoards[ethernetType].eth_mdc);
if (ethernetBoards[ethernetType].eth_mdio>=0) pins.add(ethernetBoards[ethernetType].eth_mdio);
for (uint8_t p=0; p<WLED_ETH_RSVD_PINS_COUNT; p++) pins.add(esp32_nonconfigurable_ethernet_pins[p].pin);
if (ethernetBoards[ethernetType].eth_power>=0) pins.add(ethernetBoards[ethernetType].eth_power);
if (ethernetBoards[ethernetType].eth_mdc>=0) pins.add(ethernetBoards[ethernetType].eth_mdc);
if (ethernetBoards[ethernetType].eth_mdio>=0) pins.add(ethernetBoards[ethernetType].eth_mdio);
switch (ethernetBoards[ethernetType].eth_clk_mode) {
case ETH_CLOCK_GPIO0_IN:
case ETH_CLOCK_GPIO0_OUT:

42
wled00/wled.cpp
View File

@ -8,16 +8,20 @@
#include "soc/rtc_cntl_reg.h"
#endif
/*
* Main WLED class implementation. Mostly initialization and connection logic
*/
WLED::WLED()
{
}
#ifdef WLED_USE_ETHERNET
ethernet_settings ethernetBoards[] = {
// The following six pins are neither configurable nor
// can they be re-assigned through IOMUX / GPIO matrix.
// See https://docs.espressif.com/projects/esp-idf/en/latest/esp32/hw-reference/esp32/get-started-ethernet-kit-v1.1.html#ip101gri-phy-interface
const managed_pin_type esp32_nonconfigurable_ethernet_pins[WLED_ETH_RSVD_PINS_COUNT] = {
{ 21, true }, // RMII EMAC TX EN == When high, clocks the data on TXD0 and TXD1 to transmitter
{ 19, true }, // RMII EMAC TXD0 == First bit of transmitted data
{ 22, true }, // RMII EMAC TXD1 == Second bit of transmitted data
{ 25, false }, // RMII EMAC RXD0 == First bit of received data
{ 26, false }, // RMII EMAC RXD1 == Second bit of received data
{ 27, true }, // RMII EMAC CRS_DV == Carrier Sense and RX Data Valid
};
const ethernet_settings ethernetBoards[] = {
// None
{
},
@ -78,16 +82,24 @@ ethernet_settings ethernetBoards[] = {
// ESP3DEUXQuattro
{
1, // eth_address,
-1, // eth_power,
23, // eth_mdc,
18, // eth_mdio,
ETH_PHY_LAN8720, // eth_type,
ETH_CLOCK_GPIO17_OUT // eth_clk_mode
1, // eth_address,
-1, // eth_power,
23, // eth_mdc,
18, // eth_mdio,
ETH_PHY_LAN8720, // eth_type,
ETH_CLOCK_GPIO17_OUT // eth_clk_mode
}
};
#endif
/*
* Main WLED class implementation. Mostly initialization and connection logic
*/
WLED::WLED()
{
}
// turns all LEDs off and restarts ESP
void WLED::reset()
{

2
wled00/wled.h
View File

@ -8,7 +8,7 @@
*/
// version code in format yymmddb (b = daily build)
#define VERSION 2108261
#define VERSION 2108271
//uncomment this if you have a "my_config.h" file you'd like to use
//#define WLED_USE_MY_CONFIG

18
wled00/wled_ethernet.h
View File

@ -1,20 +1,9 @@
#ifndef WLED_ETHERNET_H
#define WLED_ETHERNET_H
#ifdef WLED_USE_ETHERNET
#include "pin_manager.h"
// The following six pins are neither configurable nor
// can they be re-assigned through IOMUX / GPIO matrix.
// See https://docs.espressif.com/projects/esp-idf/en/latest/esp32/hw-reference/esp32/get-started-ethernet-kit-v1.1.html#ip101gri-phy-interface
const managed_pin_type esp32_nonconfigurable_ethernet_pins[6] = {
{ 21, true }, // RMII EMAC TX EN == When high, clocks the data on TXD0 and TXD1 to transmitter
{ 19, true }, // RMII EMAC TXD0 == First bit of transmitted data
{ 22, true }, // RMII EMAC TXD1 == Second bit of transmitted data
{ 25, false }, // RMII EMAC RXD0 == First bit of received data
{ 26, false }, // RMII EMAC RXD1 == Second bit of received data
{ 27, true }, // RMII EMAC CRS_DV == Carrier Sense and RX Data Valid
};
#ifdef WLED_USE_ETHERNET
// For ESP32, the remaining five pins are at least somewhat configurable.
// eth_address is in range [0..31], indicates which PHY (MAC?) address should be allocated to the interface
@ -37,7 +26,10 @@ typedef struct EthernetSettings {
eth_clock_mode_t eth_clk_mode;
} ethernet_settings;
extern ethernet_settings ethernetBoards[];
extern const ethernet_settings ethernetBoards[];
#define WLED_ETH_RSVD_PINS_COUNT 6
extern const managed_pin_type esp32_nonconfigurable_ethernet_pins[WLED_ETH_RSVD_PINS_COUNT];
#endif
#endif

22
wled00/xml.cpp
View File

@ -266,9 +266,8 @@ void getSettingsJS(byte subPage, char* dest)
DynamicJsonDocument doc(JSON_BUFFER_SIZE/2);
JsonObject mods = doc.createNestedObject(F("um"));
usermods.addToConfig(mods);
oappend(SET_F("d.um_p=["));
oappend(SET_F("d.um_p=[6,7,8,9,10,11"));
if (!mods.isNull()) {
uint8_t i=0;
for (JsonPair kv : mods) {
if (!kv.value().isNull()) {
// element is an JsonObject
@ -277,22 +276,14 @@ void getSettingsJS(byte subPage, char* dest)
if (obj["pin"].is<JsonArray>()) {
JsonArray pins = obj["pin"].as<JsonArray>();
for (JsonVariant pv : pins) {
if (pv.as<int>() > -1) {
if (i++) oappend(SET_F(","));
oappendi(pv.as<int>());
}
if (pv.as<int>() > -1) { oappend(","); oappendi(pv.as<int>()); }
}
} else {
if (obj["pin"].as<int>() > -1) {
if (i++) oappend(SET_F(","));
oappendi(obj["pin"].as<int>());
}
if (obj["pin"].as<int>() > -1) { oappend(","); oappendi(obj["pin"].as<int>()); }
}
}
}
}
if (i) oappend(SET_F(","));
oappend(SET_F("6,7,8,9,10,11")); // flash memory pins
#ifdef WLED_ENABLE_DMX
oappend(SET_F(",2")); // DMX hardcoded pin
#endif
@ -324,9 +315,10 @@ void getSettingsJS(byte subPage, char* dest)
#endif
#ifdef WLED_USE_ETHERNET
if (ethernetType != WLED_ETH_NONE && ethernetType < WLED_NUM_ETH_TYPES) {
if (ethernetBoards[ethernetType].eth_power>=0) { oappend(","); oappend(itoa(ethernetBoards[ethernetType].eth_power,nS,10)); }
if (ethernetBoards[ethernetType].eth_mdc>=0) { oappend(","); oappend(itoa(ethernetBoards[ethernetType].eth_mdc,nS,10)); }
if (ethernetBoards[ethernetType].eth_mdio>=0) { oappend(","); oappend(itoa(ethernetBoards[ethernetType].eth_mdio,nS,10)); }
for (uint8_t p=0; p<WLED_ETH_RSVD_PINS_COUNT; p++) { oappend(","); oappend(itoa(esp32_nonconfigurable_ethernet_pins[p].pin,nS,10)); }
if (ethernetBoards[ethernetType].eth_power>=0) { oappend(","); oappend(itoa(ethernetBoards[ethernetType].eth_power,nS,10)); }
if (ethernetBoards[ethernetType].eth_mdc>=0) { oappend(","); oappend(itoa(ethernetBoards[ethernetType].eth_mdc,nS,10)); }
if (ethernetBoards[ethernetType].eth_mdio>=0) { oappend(","); oappend(itoa(ethernetBoards[ethernetType].eth_mdio,nS,10)); }
switch (ethernetBoards[ethernetType].eth_clk_mode) {
case ETH_CLOCK_GPIO0_IN:
case ETH_CLOCK_GPIO0_OUT: