Merge branch 'dev' into mergedev-210115

tools/cdata.js

@@ -398,6 +398,14 @@ const char PAGE_dmxmap[] PROGMEM = R"=====()=====";
       method: "plaintext",
       filter: "html-minify",
     },
+    {
+      file: "liveviewws.htm",
+      name: "PAGE_liveviewws",
+      prepend: "=====(",
+      append: ")=====",
+      method: "plaintext",
+      filter: "html-minify",
+    },
     {
       file: "404.htm",
       name: "PAGE_404",

usermods/BME280_v2/README.md

@@ -0,0 +1,40 @@
+Hello! I have written a v2 usermod for the BME280/BMP280 sensor based on the [existing v1 usermod](https://github.com/Aircoookie/WLED/blob/master/usermods/Wemos_D1_mini%2BWemos32_mini_shield/usermod_bme280.cpp). It is not just a refactor, there are many changes which I made to fit my use case, and I hope they will fit the use cases of others as well! Most notably, this usermod is *just* for the BME280 and does not control a display like in the v1 usermod designed for the WeMos shield. 
+
+- Requires libraries `BME280@~3.0.0` (by [finitespace](https://github.com/finitespace/BME280)) and `Wire`. Please add these under `lib_deps` in your `platform.ini` (or `platform_override.ini`).
+- Data is published over MQTT so make sure you've enabled the MQTT sync interface.
+- This usermod also writes to serial (GPIO1 on ESP8266). Please make sure nothing else listening on the serial TX pin of your board will get confused by log messages!
+
+To enable, compile with `USERMOD_BME280` defined (i.e. `platformio_override.ini`)
+```ini
+build_flags =
+  ${common.build_flags_esp8266}
+  -D USERMOD_BME280
+```
+or define `USERMOD_BME280` in `my_config.h`
+```c++
+#define USERMOD_BME280
+```
+
+Changes include:
+- Adjustable measure intervals
+  - Temperature and pressure have separate intervals due to pressure not frequently changing at any constant altitude
+- Adjustment of number of decimal places in published sensor values
+  - Separate adjustment for temperature, humidity and pressure values
+  - Values are rounded to the specified number of decimal places
+- Pressure measured in units of hPa instead of Pa
+- Calculation of heat index (apparent temperature) and dew point
+  - These, along with humidity measurements, are disabled if the sensor is a BMP280
+- 16x oversampling of sensor during measurement
+- Values are only published if they are different from the previous value
+- Values are published on startup (continually until the MQTT broker acknowledges a successful publication)
+
+Adjustments are made through preprocessor definitions at the start of the class definition.
+
+MQTT topics are as follows:
+Measurement type | MQTT topic
+--- | ---
+Temperature | `<deviceTopic>/temperature`
+Humidity | `<deviceTopic>/humidity`
+Pressure | `<deviceTopic>/pressure`
+Heat index | `<deviceTopic>/heat_index`
+Dew point | `<deviceTopic>/dew_point`

usermods/BME280_v2/usermod_bme280.h

@@ -0,0 +1,212 @@
+#pragma once
+
+#include "wled.h"
+#include <Arduino.h>
+#include <Wire.h>
+#include <BME280I2C.h>               // BME280 sensor
+#include <EnvironmentCalculations.h> // BME280 extended measurements
+
+class UsermodBME280 : public Usermod
+{
+private:
+// User-defined configuration
+#define Celsius               // Show temperature mesaurement in Celcius. Comment out for Fahrenheit
+#define TemperatureDecimals 1 // Number of decimal places in published temperaure values
+#define HumidityDecimals 0    // Number of decimal places in published humidity values
+#define PressureDecimals 2    // Number of decimal places in published pressure values
+#define TemperatureInterval 5 // Interval to measure temperature (and humidity, dew point if available) in seconds
+#define PressureInterval 300  // Interval to measure pressure in seconds
+
+// Sanity checks
+#if !defined(TemperatureDecimals) || TemperatureDecimals < 0
+  #define TemperatureDecimals 0
+#endif
+#if !defined(HumidityDecimals) || HumidityDecimals < 0
+  #define HumidityDecimals 0
+#endif
+#if !defined(PressureDecimals) || PressureDecimals < 0
+  #define PressureDecimals 0
+#endif
+#if !defined(TemperatureInterval) || TemperatureInterval < 0
+  #define TemperatureInterval 1
+#endif
+#if !defined(PressureInterval) || PressureInterval < 0
+  #define PressureInterval TemperatureInterval
+#endif
+
+#ifdef ARDUINO_ARCH_ESP32 // ESP32 boards
+  uint8_t SCL_PIN = 22;
+  uint8_t SDA_PIN = 21;
+#else // ESP8266 boards
+  uint8_t SCL_PIN = 5;
+  uint8_t SDA_PIN = 4;
+  //uint8_t RST_PIN = 16; // Uncoment for Heltec WiFi-Kit-8
+#endif
+
+  // BME280 sensor settings
+  BME280I2C::Settings settings{
+      BME280::OSR_X16, // Temperature oversampling x16
+      BME280::OSR_X16, // Humidity oversampling x16
+      BME280::OSR_X16, // Pressure oversampling x16
+      // Defaults
+      BME280::Mode_Forced,
+      BME280::StandbyTime_1000ms,
+      BME280::Filter_Off,
+      BME280::SpiEnable_False,
+      BME280I2C::I2CAddr_0x76 // I2C address. I2C specific. Default 0x76
+  };
+
+  BME280I2C bme{settings};
+
+  uint8_t SensorType;
+
+  // Measurement timers
+  long timer;
+  long lastTemperatureMeasure = 0;
+  long lastPressureMeasure = 0;
+
+  // Current sensor values
+  float SensorTemperature;
+  float SensorHumidity;
+  float SensorHeatIndex;
+  float SensorDewPoint;
+  float SensorPressure;
+  // Track previous sensor values
+  float lastTemperature;
+  float lastHumidity;
+  float lastHeatIndex;
+  float lastDewPoint;
+  float lastPressure;
+
+  // Store packet IDs of MQTT publications
+  uint16_t mqttTemperaturePub = 0;
+  uint16_t mqttPressurePub = 0;
+
+  void UpdateBME280Data(int SensorType)
+  {
+    float _temperature, _humidity, _pressure;
+    #ifdef Celsius
+      BME280::TempUnit tempUnit(BME280::TempUnit_Celsius);
+      EnvironmentCalculations::TempUnit envTempUnit(EnvironmentCalculations::TempUnit_Celsius);
+    #else
+      BME280::TempUnit tempUnit(BME280::TempUnit_Fahrenheit);
+      EnvironmentCalculations::TempUnit envTempUnit(EnvironmentCalculations::TempUnit_Fahrenheit);
+    #endif
+    BME280::PresUnit presUnit(BME280::PresUnit_hPa);
+
+    bme.read(_pressure, _temperature, _humidity, tempUnit, presUnit);
+
+    SensorTemperature = _temperature;
+    SensorHumidity = _humidity;
+    SensorPressure = _pressure;
+    if (SensorType == 1)
+    {
+      SensorHeatIndex = EnvironmentCalculations::HeatIndex(_temperature, _humidity, envTempUnit);
+      SensorDewPoint = EnvironmentCalculations::DewPoint(_temperature, _humidity, envTempUnit);
+    }
+  }
+
+public:
+  void setup()
+  {
+    Wire.begin(SDA_PIN, SCL_PIN);
+
+    if (!bme.begin())
+    {
+      SensorType = 0;
+      Serial.println("Could not find BME280I2C sensor!");
+    }
+    else
+    {
+      switch (bme.chipModel())
+      {
+      case BME280::ChipModel_BME280:
+        SensorType = 1;
+        Serial.println("Found BME280 sensor! Success.");
+        break;
+      case BME280::ChipModel_BMP280:
+        SensorType = 2;
+        Serial.println("Found BMP280 sensor! No Humidity available.");
+        break;
+      default:
+        SensorType = 0;
+        Serial.println("Found UNKNOWN sensor! Error!");
+      }
+    }
+  }
+
+  void loop()
+  {
+    // BME280 sensor MQTT publishing
+    // Check if sensor present and MQTT Connected, otherwise it will crash the MCU
+    if (SensorType != 0 && mqtt != nullptr)
+    {
+      // Timer to fetch new temperature, humidity and pressure data at intervals
+      timer = millis();
+
+      if (timer - lastTemperatureMeasure >= TemperatureInterval * 1000 || mqttTemperaturePub == 0)
+      {
+        lastTemperatureMeasure = timer;
+
+        UpdateBME280Data(SensorType);
+
+        float Temperature = roundf(SensorTemperature * pow(10, TemperatureDecimals)) / pow(10, TemperatureDecimals);
+        float Humidity, HeatIndex, DewPoint;
+
+        // If temperature has changed since last measure, create string populated with device topic
+        // from the UI and values read from sensor, then publish to broker
+        if (Temperature != lastTemperature)
+        {
+          String topic = String(mqttDeviceTopic) + "/temperature";
+          mqttTemperaturePub = mqtt->publish(topic.c_str(), 0, false, String(Temperature, TemperatureDecimals).c_str());
+        }
+
+        lastTemperature = Temperature; // Update last sensor temperature for next loop
+
+        if (SensorType == 1) // Only if sensor is a BME280
+        {
+          Humidity = roundf(SensorHumidity * pow(10, HumidityDecimals)) / pow(10, HumidityDecimals);
+          HeatIndex = roundf(SensorHeatIndex * pow(10, TemperatureDecimals)) / pow(10, TemperatureDecimals);
+          DewPoint = roundf(SensorDewPoint * pow(10, TemperatureDecimals)) / pow(10, TemperatureDecimals);
+
+          if (Humidity != lastHumidity)
+          {
+            String topic = String(mqttDeviceTopic) + "/humidity";
+            mqtt->publish(topic.c_str(), 0, false, String(Humidity, HumidityDecimals).c_str());
+          }
+
+          if (HeatIndex != lastHeatIndex)
+          {
+            String topic = String(mqttDeviceTopic) + "/heat_index";
+            mqtt->publish(topic.c_str(), 0, false, String(HeatIndex, TemperatureDecimals).c_str());
+          }
+
+          if (DewPoint != lastDewPoint)
+          {
+            String topic = String(mqttDeviceTopic) + "/dew_point";
+            mqtt->publish(topic.c_str(), 0, false, String(DewPoint, TemperatureDecimals).c_str());
+          }
+
+          lastHumidity = Humidity;
+          lastHeatIndex = HeatIndex;
+          lastDewPoint = DewPoint;
+        }
+      }
+
+      if (timer - lastPressureMeasure >= PressureInterval * 1000 || mqttPressurePub == 0)
+      {
+        lastPressureMeasure = timer;
+
+        float Pressure = roundf(SensorPressure * pow(10, PressureDecimals)) / pow(10, PressureDecimals);
+
+        if (Pressure != lastPressure)
+        {
+          String topic = String(mqttDeviceTopic) + "/pressure";
+          mqttPressurePub = mqtt->publish(topic.c_str(), 0, true, String(Pressure, PressureDecimals).c_str());
+        }
+
+        lastPressure = Pressure;
+      }
+    }
+  }
+};

wled00/bus_manager.h

@@ -0,0 +1,245 @@
+#ifndef BusManager_h
+#define BusManager_h
+
+/*
+ * Class for addressing various light types
+ */
+
+#include "wled.h"
+#include "bus_wrapper.h"
+
+class BusManager {
+  public:
+  BusManager() {
+
+  };
+  
+  int add(uint8_t busType, uint8_t* pins, uint16_t len = 1) {
+    if (numBusses >= WLED_MAX_BUSSES) return -1;
+    if (IS_DIGITAL(busType)) {
+      busses[numBusses] = new BusDigital(busType, pins, len, numBusses);
+    } else {
+      busses[numBusses] = new BusPwm(busType, pins);
+    }
+    numBusses++;
+    return numBusses -1;
+  }
+
+  void removeAll() {
+    for (uint8_t i = 0; i < numBusses; i++) delete busses[i];
+    numBusses = 0;
+  }
+  //void remove(uint8_t id);
+
+  void show() {
+    for (uint8_t i = 0; i < numBusses; i++) {
+      busses[i]->show();
+    }
+  }
+
+  void setPixelColor(uint16_t pix, uint32_t c) {
+    for (uint8_t i = 0; i < numBusses; i++) {
+      Bus* b = busses[i];
+      uint16_t bstart = b->getStart();
+      if (pix < bstart) continue;
+      busses[i]->setPixelColor(pix - bstart, c);
+    }
+  }
+
+  void setBrightness(uint8_t b) {
+    for (uint8_t i = 0; i < numBusses; i++) {
+      busses[i]->setBrightness(b);
+    }
+  }
+
+  private:
+  uint8_t numBusses = 0;
+  Bus* busses[WLED_MAX_BUSSES];
+};
+
+//parent class of BusDigital and BusPwm
+class Bus {
+  public:
+  Bus(uint8_t type) {
+    _type = type;
+  };
+  
+  virtual void show() {}
+
+  virtual void setPixelColor(uint16_t pix, uint32_t c) {};
+
+  virtual void setBrightness(uint8_t b) { _bri = b; };
+
+  virtual uint32_t getPixelColor(uint16_t pix) { return 0; };
+
+  virtual ~Bus() { //throw the bus under the bus
+    
+  }
+
+  uint16_t getStart() {
+    return _start;
+  }
+
+  void setStart(uint16_t start) {
+    _start = start;
+  }
+
+  virtual uint8_t getColorOrder() {
+    return COL_ORDER_RGB;
+  }
+
+  virtual void setColorOrder() {}
+
+  uint8_t getType() {
+    return _type;
+  }
+
+  bool isOk() {
+    return _valid;
+  }
+
+  protected:
+  uint8_t _type = TYPE_NONE;
+  uint8_t _bri = 255;
+  uint16_t _start;
+  bool _valid = false;
+};
+
+
+class BusDigital : public Bus {
+  public:
+  BusDigital(uint8_t type, uint8_t* pins, uint16_t len, uint8_t nr) : Bus(type) {
+    if (!IS_DIGITAL(type) || !len) return;
+    _pins[0] = pins[0];
+    if (IS_2PIN(type)) _pins[1] = pins[1];
+    _len = len;
+    _iType = PolyBus::getI(type, _pins, nr);
+    if (_iType == I_NONE) return;
+    _valid = true;
+  };
+
+  void show() {
+    PolyBus::show(_busPtr, _iType);
+  }
+
+  void setPixelColor(uint16_t pix, uint32_t c) {
+
+  }
+
+  uint8_t getColorOrder() {
+    return _colorOrder;
+  }
+
+  void setColorOrder(uint8_t colorOrder) {
+    if (colorOrder > 5) return;
+    _colorOrder = colorOrder;
+  }
+
+  private: 
+  uint8_t _colorOrder = COL_ORDER_GRB;
+  uint8_t _pins[2] = {255, 255};
+  uint8_t _iType = I_NONE;
+  uint16_t _len = 0;
+  void * _busPtr = nullptr;
+};
+
+
+class BusPwm : public Bus {
+  public:
+  BusPwm(uint8_t type, uint8_t* pins) : Bus(type) {
+    if (!IS_PWM(type)) return;
+    uint8_t numPins = NUM_PWM_PINS(type);
+
+    #ifdef ESP8266
+    analogWriteRange(255);  //same range as one RGB channel
+    analogWriteFreq(WLED_PWM_FREQ_ESP8266);
+    #else
+    _ledcStart = pinManager.allocateLedc(numPins);
+    if (_ledcStart == 255) { //no more free LEDC channels
+      deallocatePins(); return;
+    }
+    #endif
+
+    for (uint8_t i = 0; i < numPins; i++) {
+      _pins[i] = pins[i];
+      if (!pinManager.allocatePin(_pins[i])) {
+        deallocatePins(); return;
+      }
+      #ifdef ESP8266
+      pinMode(_pins[i], OUTPUT);
+      #else
+      ledcSetup(_ledcStart + i, WLED_PWM_FREQ_ESP32, 8);
+      ledcAttachPin(_pins[i], _ledcStart + i);
+      #endif
+    }
+
+    _valid = true;
+  };
+
+  void setPixelColor(uint16_t pix, uint32_t c) {
+    if (pix != 0 || !_valid) return; //only react to first pixel
+    uint8_t r = c >> 16;
+    uint8_t g = c >>  8;
+    uint8_t b = c      ;
+    uint8_t w = c >> 24;
+
+    switch (_type) {
+      case TYPE_ANALOG_1CH: //one channel (white), use highest RGBW value
+        _data[0] = max(r, max(g, max(b, w))); break;
+      
+      case TYPE_ANALOG_2CH: //warm white + cold white, we'll need some nice handling here, for now just R+G channels
+      case TYPE_ANALOG_3CH: //standard dumb RGB
+      case TYPE_ANALOG_4CH: //RGBW
+      case TYPE_ANALOG_5CH: //we'll want the white handling from 2CH here + RGB
+        _data[0] = r; _data[1] = g; _data[2] = b; _data[3] = w; _data[4] = 0; break;
+
+      default: return;
+    }
+  }
+
+  //does no index check
+  uint32_t getPixelColor(uint16_t pix) {
+    return ((_data[3] << 24) | (_data[0] << 16) | (_data[1] << 8) | (_data[2]));
+  }
+
+  void show() {
+    uint8_t numPins = NUM_PWM_PINS(_type);
+    for (uint8_t i = 0; i < numPins; i++) {
+      uint8_t scaled = (_data[i] * _bri) / 255;
+      #ifdef ESP8266
+      analogWrite(_pins[i], scaled);
+      #else
+      ledcWrite(_ledcStart + i, scaled);
+      #endif
+    }
+  }
+
+  ~BusPwm() {
+    deallocatePins();
+  };
+
+  private: 
+  uint8_t _pins[5];
+  uint8_t _data[5] = {255, 255, 255, 255, 255};
+  #ifdef ARDUINO_ARCH_ESP32
+  uint8_t _ledcStart = 255;
+  #endif
+
+  void deallocatePins() {
+    uint8_t numPins = NUM_PWM_PINS(_type);
+    for (uint8_t i = 0; i < numPins; i++) {
+      if (!pinManager.isPinOk(_pins[i])) continue;
+      #ifdef ESP8266
+      digitalWrite(_pins[i], LOW); //turn off PWM interrupt
+      #else
+      if (_ledcStart < 16) ledcDetachPin(_pins[i], _ledcStart + i);
+      #endif
+      pinManager.deallocatePin(_pins[i]);
+    }
+    #ifdef ARDUINO_ARCH_ESP32
+    pinManager.deallocateLedc(_ledcStart, numPins);
+    #endif
+  }
+};
+
+#endif

wled00/bus_wrapper.h

@@ -0,0 +1,248 @@
+#ifndef BusWrapper_h
+#define BusWrapper_h
+
+#include "wled.h"
+
+//Hardware SPI Pins
+#define P_8266_HS_MOSI 13
+#define P_8266_HS_CLK  14
+#define P_32_HS_MOSI   13
+#define P_32_HS_CLK    14
+#define P_32_VS_MOSI   23
+#define P_32_VS_CLK    18
+
+//The dirty list of possible bus types. Quite a lot...
+#define I_NONE 0
+//ESP8266 RGB
+#define I_8266_U0_NEO_3 1
+#define I_8266_U1_NEO_3 2
+#define I_8266_DM_NEO_3 3
+#define I_8266_BB_NEO_3 4
+//RGBW
+#define I_8266_U0_NEO_4 5
+#define I_8266_U1_NEO_4 6
+#define I_8266_DM_NEO_4 7
+#define I_8266_BB_NEO_4 8
+//400Kbps
+#define I_8266_U0_400_3 9
+#define I_8266_U1_400_3 10
+#define I_8266_DM_400_3 11
+#define I_8266_BB_400_3 12
+//TM1418 (RGBW)
+#define I_8266_U0_TM1_4 13
+#define I_8266_U1_TM1_4 14
+#define I_8266_DM_TM1_4 15
+#define I_8266_BB_TM1_4 16
+
+/*** ESP32 Neopixel methods ***/
+//RGB
+#define I_32_R0_NEO_3 17
+#define I_32_R1_NEO_3 18
+#define I_32_R2_NEO_3 19
+#define I_32_R3_NEO_3 20
+#define I_32_R4_NEO_3 21
+#define I_32_R5_NEO_3 22
+#define I_32_R6_NEO_3 23
+#define I_32_R7_NEO_3 24
+#define I_32_I0_NEO_3 25
+#define I_32_I1_NEO_3 26
+//RGBW
+#define I_32_R0_NEO_4 27
+#define I_32_R1_NEO_4 28
+#define I_32_R2_NEO_4 29
+#define I_32_R3_NEO_4 30
+#define I_32_R4_NEO_4 31
+#define I_32_R5_NEO_4 32
+#define I_32_R6_NEO_4 33
+#define I_32_R7_NEO_4 34
+#define I_32_I0_NEO_4 35
+#define I_32_I1_NEO_4 36
+//400Kbps
+#define I_32_R0_400_3 37
+#define I_32_R1_400_3 38
+#define I_32_R2_400_3 39
+#define I_32_R3_400_3 40
+#define I_32_R4_400_3 41
+#define I_32_R5_400_3 42
+#define I_32_R6_400_3 43
+#define I_32_R7_400_3 44
+#define I_32_I0_400_3 45
+#define I_32_I1_400_3 46
+//TM1418 (RGBW)
+#define I_32_R0_TM1_4 47
+#define I_32_R1_TM1_4 48
+#define I_32_R2_TM1_4 49
+#define I_32_R3_TM1_4 50
+#define I_32_R4_TM1_4 51
+#define I_32_R5_TM1_4 52
+#define I_32_R6_TM1_4 53
+#define I_32_R7_TM1_4 54
+#define I_32_I0_TM1_4 55
+#define I_32_I1_TM1_4 56
+//Bit Bang theoratically possible, but very undesirable and not needed (no pin restrictions on RMT and I2S)
+
+//APA102
+#define I_HS_DOT_3 57 //hardware SPI
+#define I_SS_DOT_3 58 //soft SPI
+
+//LPD8806
+#define I_HS_LPD_3 59
+#define I_SS_LPD_3 60
+
+//WS2801
+#define I_HS_WS1_3 61
+#define I_SS_WS1_3 62
+
+//P9813
+#define I_HS_P98_3 63
+#define I_SS_P98_3 64
+
+
+/*** ESP8266 Neopixel methods ***/
+#ifdef ESP8266
+//RGB
+#define B_8266_U0_NEO_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp8266Uart0Ws2813Method> //3 chan, esp8266, gpio1
+#define B_8266_U1_NEO_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp8266Uart1Ws2813Method> //3 chan, esp8266, gpio2
+#define B_8266_DM_NEO_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp8266Dma800KbpsMethod>  //3 chan, esp8266, gpio3
+#define B_8266_BB_NEO_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp8266BitBang800KbpsMethod> //3 chan, esp8266, bb (any pin)
+//RGBW
+#define B_8266_U0_NEO_4 NeoPixelBrightnessBus<NeoGrbwFeature, NeoEsp8266Uart0Ws2813Method>   //4 chan, esp8266, gpio1
+#define B_8266_U1_NEO_4 NeoPixelBrightnessBus<NeoGrbwFeature, NeoEsp8266Uart1Ws2813Method>   //4 chan, esp8266, gpio2
+#define B_8266_DM_NEO_4 NeoPixelBrightnessBus<NeoGrbwFeature, NeoEsp8266Dma800KbpsMethod>    //4 chan, esp8266, gpio3
+#define B_8266_BB_NEO_4 NeoPixelBrightnessBus<NeoGrbwFeature, NeoEsp8266BitBang800KbpsMethod> //4 chan, esp8266, bb (any pin)
+//400Kbps
+#define B_8266_U0_400_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp8266Uart0400KbpsMethod>   //3 chan, esp8266, gpio1
+#define B_8266_U1_400_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp8266Uart1400KbpsMethod>   //3 chan, esp8266, gpio2
+#define B_8266_DM_400_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp8266Dma400KbpsMethod>     //3 chan, esp8266, gpio3
+#define B_8266_BB_400_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp8266BitBang400KbpsMethod> //3 chan, esp8266, bb (any pin)
+//TM1418 (RGBW)
+#define B_8266_U0_TM1_4 NeoPixelBrightnessBus<NeoWrgbTm1814Feature, NeoEsp8266Uart0Tm1814Method>
+#define B_8266_U1_TM1_4 NeoPixelBrightnessBus<NeoWrgbTm1814Feature, NeoEsp8266Uart1Tm1814Method>
+#define B_8266_DM_TM1_4 NeoPixelBrightnessBus<NeoWrgbTm1814Feature, NeoEsp8266DmaTm1814Method>
+#define B_8266_BB_TM1_4 NeoPixelBrightnessBus<NeoWrgbTm1814Feature, NeoEsp8266BitBangTm1814Method>
+#endif
+
+/*** ESP32 Neopixel methods ***/
+#ifdef ARDUINO_ARCH_ESP32
+//RGB
+#define B_32_R0_NEO_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp32Rmt0Ws2812xMethod>
+#define B_32_R1_NEO_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp32Rmt1Ws2812xMethod>
+#define B_32_R2_NEO_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp32Rmt2Ws2812xMethod>
+#define B_32_R3_NEO_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp32Rmt3Ws2812xMethod>
+#define B_32_R4_NEO_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp32Rmt4Ws2812xMethod>
+#define B_32_R5_NEO_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp32Rmt5Ws2812xMethod>
+#define B_32_R6_NEO_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp32Rmt6Ws2812xMethod>
+#define B_32_R7_NEO_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp32Rmt7Ws2812xMethod>
+#define B_32_I0_NEO_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp32I2s0800KbpsMethod>
+#define B_32_I1_NEO_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp32I2s1800KbpsMethod>
+//RGBW
+#define B_32_R0_NEO_4 NeoPixelBrightnessBus<NeoGrbwFeature, NeoEsp32Rmt0Ws2812xMethod>
+#define B_32_R1_NEO_4 NeoPixelBrightnessBus<NeoGrbwFeature, NeoEsp32Rmt1Ws2812xMethod>
+#define B_32_R2_NEO_4 NeoPixelBrightnessBus<NeoGrbwFeature, NeoEsp32Rmt2Ws2812xMethod>
+#define B_32_R3_NEO_4 NeoPixelBrightnessBus<NeoGrbwFeature, NeoEsp32Rmt3Ws2812xMethod>
+#define B_32_R4_NEO_4 NeoPixelBrightnessBus<NeoGrbwFeature, NeoEsp32Rmt4Ws2812xMethod>
+#define B_32_R5_NEO_4 NeoPixelBrightnessBus<NeoGrbwFeature, NeoEsp32Rmt5Ws2812xMethod>
+#define B_32_R6_NEO_4 NeoPixelBrightnessBus<NeoGrbwFeature, NeoEsp32Rmt6Ws2812xMethod>
+#define B_32_R7_NEO_4 NeoPixelBrightnessBus<NeoGrbwFeature, NeoEsp32Rmt7Ws2812xMethod>
+#define B_32_I0_NEO_4 NeoPixelBrightnessBus<NeoGrbwFeature, NeoEsp32I2s0800KbpsMethod>
+#define B_32_I1_NEO_4 NeoPixelBrightnessBus<NeoGrbwFeature, NeoEsp32I2s1800KbpsMethod>
+//400Kbps
+#define B_32_R0_400_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp32Rmt0400KbpsMethod>
+#define B_32_R1_400_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp32Rmt1400KbpsMethod>
+#define B_32_R2_400_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp32Rmt2400KbpsMethod>
+#define B_32_R3_400_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp32Rmt3400KbpsMethod>
+#define B_32_R4_400_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp32Rmt4400KbpsMethod>
+#define B_32_R5_400_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp32Rmt5400KbpsMethod>
+#define B_32_R6_400_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp32Rmt6400KbpsMethod>
+#define B_32_R7_400_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp32Rmt7400KbpsMethod>
+#define B_32_I0_400_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp32I2s0400KbpsMethod>
+#define B_32_I1_400_3 NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp32I2s1400KbpsMethod>
+//TM1418 (RGBW)
+#define B_32_R0_TM1_4 NeoPixelBrightnessBus<NeoWrgbTm1814Feature, NeoEsp32Rmt0Tm1814Method>
+#define B_32_R1_TM1_4 NeoPixelBrightnessBus<NeoWrgbTm1814Feature, NeoEsp32Rmt1Tm1814Method>
+#define B_32_R2_TM1_4 NeoPixelBrightnessBus<NeoWrgbTm1814Feature, NeoEsp32Rmt2Tm1814Method>
+#define B_32_R3_TM1_4 NeoPixelBrightnessBus<NeoWrgbTm1814Feature, NeoEsp32Rmt3Tm1814Method>
+#define B_32_R4_TM1_4 NeoPixelBrightnessBus<NeoWrgbTm1814Feature, NeoEsp32Rmt4Tm1814Method>
+#define B_32_R5_TM1_4 NeoPixelBrightnessBus<NeoWrgbTm1814Feature, NeoEsp32Rmt5Tm1814Method>
+#define B_32_R6_TM1_4 NeoPixelBrightnessBus<NeoWrgbTm1814Feature, NeoEsp32Rmt6Tm1814Method>
+#define B_32_R7_TM1_4 NeoPixelBrightnessBus<NeoWrgbTm1814Feature, NeoEsp32Rmt7Tm1814Method>
+#define B_32_I0_TM1_4 NeoPixelBrightnessBus<NeoWrgbTm1814Feature, NeoEsp32I2s0Tm1814Method>
+#define B_32_I1_TM1_4 NeoPixelBrightnessBus<NeoWrgbTm1814Feature, NeoEsp32I2s1Tm1814Method>
+//Bit Bang theoratically possible, but very undesirable and not needed (no pin restrictions on RMT and I2S)
+
+#endif
+
+//APA102
+#define B_HS_DOT_3 NeoPixelBrightnessBus<DotStarBgrFeature, DotStarSpiMethod> //hardware SPI
+#define B_SS_DOT_3 NeoPixelBrightnessBus<DotStarBgrFeature, DotStarMethod> //soft SPI
+
+//LPD8806
+#define B_HS_LPD_3 NeoPixelBrightnessBus<Lpd8806GrbFeature, Lpd8806SpiMethod>
+#define B_SS_LPD_3 NeoPixelBrightnessBus<Lpd8806GrbFeature, Lpd8806Method>
+
+//WS2801
+#define B_HS_WS1_3 NeoPixelBrightnessBus<NeoRbgFeature, NeoWs2801SpiMethod>
+#define B_SS_WS1_3 NeoPixelBrightnessBus<NeoRbgFeature, NeoWs2801Method>
+
+//P9813
+#define B_HS_P98_3 NeoPixelBrightnessBus<P9813BgrFeature, P9813SpiMethod>
+#define B_SS_P98_3 NeoPixelBrightnessBus<P9813BgrFeature, P9813Method>
+
+//handles pointer type conversion for all possible bus types
+class PolyBus {
+  public:
+  static void show(void* busPtr, uint8_t busType) {
+    (static_cast<NeoPixelBrightnessBus<NeoGrbFeature, NeoEsp8266Uart1Ws2813Method>*>(busPtr))->Show();
+  };
+  //gives back the internal type index (I_XX_XXX_X above) for the input 
+  static uint8_t getI(uint8_t busType, uint8_t* pins, uint8_t num = 0) {
+    if (!IS_DIGITAL(busType)) return I_NONE;
+    if (IS_2PIN(busType)) { //SPI LED chips
+      bool isHSPI = false;
+      #ifdef ESP8266
+      if (pins[0] == P_8266_HS_MOSI && pins[1] == P_8266_HS_CLK) isHSPI = true;
+      #else
+      if (pins[0] == P_32_HS_MOSI && pins[1] == P_32_HS_CLK) isHSPI = true;
+      if (pins[0] == P_32_VS_MOSI && pins[1] == P_V2_HS_CLK) isHSPI = true;
+      #endif
+      uint8_t t = I_NONE;
+      switch (busType) {
+        case TYPE_APA102:  t = I_SS_DOT_3;
+        case TYPE_LPD8806: t = I_SS_LPD_3;
+        case TYPE_WS2801:  t = I_SS_WS1_3;
+        case TYPE_P9813:   t = I_SS_P98_3;
+      }
+      if (t > I_NONE && isHSPI) t--; //hardware SPI has one smaller ID than software
+      return t;
+    } else {
+      #ifdef ESP8266
+      uint8_t offset = pins[0] -1; //for driver: 0 = uart0, 1 = uart1, 2 = dma, 3 = bitbang
+      if (offset > 3) offset = 3;
+      switch (busType) {
+        case TYPE_WS2812_RGB:
+        case TYPE_WS2812_WWA:
+          return I_8266_U0_NEO_3 + offset;
+        case TYPE_SK6812_RGBW:
+          return I_8266_U0_NEO_4 + offset;
+        case TYPE_WS2811_400KHZ:
+          return I_8266_U0_400_3 + offset;
+      }
+      #else //ESP32
+      uint8_t offset = num; //RMT bus # == bus index in BusManager
+      if (offset > 9) return I_NONE;
+      switch (busType) {
+        case TYPE_WS2812_RGB:
+        case TYPE_WS2812_WWA:
+          return I_32_R0_NEO_3 + offset;
+        case TYPE_SK6812_RGBW:
+          return I_32_R0_NEO_4 + offset;
+        case TYPE_WS2811_400KHZ:
+          return I_32_R0_400_3 + offset;
+      }
+      #endif
+    }
+    return I_NONE;
+  }
+};
+
+#endif

wled00/const.h

@@ -13,6 +13,12 @@
 //increase if you need more
 #define WLED_MAX_USERMODS 4
 
+#ifdef ESP8266
+#define WLED_MAX_BUSSES 2
+#else
+#define WLED_MAX_BUSSES 8
+#endif
+
 //Usermod IDs
 #define USERMOD_ID_RESERVED       0            //Unused. Might indicate no usermod present
 #define USERMOD_ID_UNSPECIFIED    1            //Default value for a general user mod that does not specify a custom ID
@@ -89,6 +95,7 @@
 #define TYPE_WS2812_RGB          22
 #define TYPE_GS8608              23            //same driver as WS2812, but will require signal 2x per second (else displays test pattern)
 #define TYPE_WS2811_400KHZ       24            //half-speed WS2812 protocol, used by very old WS2811 units
+#define TYPE_TM1814              25
 #define TYPE_SK6812_RGBW         30
 //"Analog" types (PWM) (32-47)
 #define TYPE_ONOFF               40            //binary output (relays etc.)
@@ -102,8 +109,11 @@
 #define TYPE_APA102              51
 #define TYPE_LPD8806             52
 #define TYPE_P9813               53
-#define TYPE_TM1814              54
 
+#define IS_DIGITAL(t) (t & 0x10) //digital are 16-31 and 48-63
+#define IS_PWM(t)     (t > 40 && t < 46)
+#define NUM_PWM_PINS(t) (t - 40) //for analog PWM 41-45 only
+#define IS_2PIN(t)      (t > 47)
 
 //Color orders
 #define COL_ORDER_GRB             0           //GRB(w),defaut
@@ -175,7 +185,11 @@
 
 #define E131_MAX_UNIVERSE_COUNT 9
 
-#define ABL_MILLIAMPS_DEFAULT 850; // auto lower brightness to stay close to milliampere limit
+#define ABL_MILLIAMPS_DEFAULT 850  // auto lower brightness to stay close to milliampere limit
+
+// PWM settings
+#define WLED_PWM_FREQ_ESP8266  880 //PWM frequency proven as good for LEDs
+#define WLED_PWM_FREQ_ESP32   5000
 
 
 #define TOUCH_THRESHOLD 32 // limit to recognize a touch, higher value means more sensitive

wled00/data/liveviewws.htm

@@ -0,0 +1,62 @@
+<!DOCTYPE html>
+<html>
+<head>
+  <meta name="viewport" content="width=device-width, initial-scale=1, minimum-scale=1">
+  <meta charset="utf-8">
+  <meta name="theme-color" content="#222222">
+  <title>WLED Live Preview</title>
+  <style>
+  body {
+    margin: 0;
+  }
+  #canv {
+    background: black;
+    filter: brightness(175%);
+    width: 100%;
+    height: 100%;
+    position: absolute;
+  }
+  </style>
+</head>
+<body>
+  <div id="canv" />
+  <script>
+    console.info("Live-Preview websocket opening");
+    var socket = new WebSocket("ws://"+document.location.host+"/ws");
+
+    socket.onopen = function () {
+      console.info("Live-Preview websocket is opened");
+      socket.send("{'lv':true}");
+    }
+
+    socket.onclose = function () { console.info("Live-Preview websocket is closing"); }
+
+    socket.onerror = function (event) { console.error("Live-Preview websocket error:", event); }
+
+    function updatePreview(leds) {
+      var str = "linear-gradient(90deg,";
+      var len = leds.length;        
+      for (i = 0; i < len; i++) {
+        var leddata = leds[i];
+        if (leddata.length > 6) leddata = leddata.substring(2);
+        str += "#" + leddata;
+        if (i < len -1) str += ","
+      }
+      str += ")";
+      document.getElementById("canv").style.background = str;
+    }
+
+    socket.onmessage = function (event) {
+      try {
+        var json = JSON.parse(event.data);
+        if (json && json.leds) {
+          requestAnimationFrame(function () {updatePreview(json.leds);});
+        } 
+      }
+      catch (err) {
+        console.error("Live-Preview websocket error:",err);
+      }      
+    }
+  </script>
+</body>
+</html>

wled00/fcn_declare.h

@@ -156,6 +156,7 @@ class PinManagerClass {
   uint8_t pinAlloc[3] = {0x00, 0x00, 0x00}; //24bit, 1 bit per pin, we use first 17bits
   #else
   uint8_t pinAlloc[5] = {0x00, 0x00, 0x00, 0x00, 0x00}; //40bit, 1 bit per pin, we use all bits
+  uint8_t ledcAlloc[2] = {0x00, 0x00}; //16 LEDC channels
   #endif
 
   public:
@@ -163,6 +164,10 @@ class PinManagerClass {
   bool allocatePin(byte gpio, bool output = true);
   bool isPinAllocated(byte gpio);
   bool isPinOk(byte gpio, bool output = true);
+  #ifdef ARDUINO_ARCH_ESP32
+  byte allocateLedc(byte channels);
+  void deallocateLedc(byte pos, byte channels);
+  #endif
 };
 
 //playlist.cpp

wled00/html_other.h

@@ -78,6 +78,17 @@ update();var tmout=null;function update(){if(document.hidden)return clearTimeout
 </script></body></html>)=====";
 
 
+// Autogenerated from wled00/data/liveviewws.htm, do not edit!!
+const char PAGE_liveviewws[] PROGMEM = R"=====(<!DOCTYPE html><html><head><meta name="viewport" 
+content="width=device-width,initial-scale=1,minimum-scale=1"><meta 
+charset="utf-8"><meta name="theme-color" content="#222222"><title>
+WLED Live Preview</title><style>
+body{margin:0}#canv{background:#000;filter:brightness(175%);width:100%;height:100%;position:absolute}
+</style></head><body><div id="canv"><script>
+console.info("Live-Preview websocket opening");var socket=new WebSocket("ws://"+document.location.host+"/ws");function updatePreview(e){var o="linear-gradient(90deg,",n=e.length;for(i=0;i<n;i++){var t=e[i];t.length>6&&(t=t.substring(2)),o+="#"+t,i<n-1&&(o+=",")}o+=")",document.getElementById("canv").style.background=o}socket.onopen=function(){console.info("Live-Preview websocket is opened"),socket.send("{'lv':true}")},socket.onclose=function(){console.info("Live-Preview websocket is closing")},socket.onerror=function(e){console.error("Live-Preview websocket error:",e)},socket.onmessage=function(e){try{var o=JSON.parse(e.data);o&&o.leds&&requestAnimationFrame((function(){updatePreview(o.leds)}))}catch(e){console.error("Live-Preview websocket error:",e)}}
+</script></body></html>)=====";
+
+
 // Autogenerated from wled00/data/404.htm, do not edit!!
 const char PAGE_404[] PROGMEM = R"=====(<!DOCTYPE html><html><head><meta charset="utf-8"><meta 
 content="width=device-width" name="viewport"><meta name="theme-color" 

wled00/json.cpp

@@ -343,7 +343,6 @@ void serializeState(JsonObject root, bool forPreset, bool includeBri, bool segme
     if (errorFlag) root[F("error")] = errorFlag;
     
     root[F("ps")] = currentPreset;
-    root[F("pss")] = savedPresets;
     root[F("pl")] = (presetCyclingEnabled) ? 0: -1;
     
     usermods.addToJsonState(root);
@@ -605,7 +604,7 @@ bool serveLiveLeds(AsyncWebServerRequest* request, uint32_t wsClient)
 
   for (uint16_t i= 0; i < used; i += n)
   {
-    olen += sprintf(obuf + olen, "\"%06X\",", strip.getPixelColor(i));
+    olen += sprintf(obuf + olen, "\"%06X\",", strip.getPixelColor(i) & 0xFFFFFF);
   }
   olen -= 1;
   oappend((const char*)F("],\"n\":"));

wled00/pin_manager.cpp

@@ -52,3 +52,41 @@ bool PinManagerClass::isPinOk(byte gpio, bool output)
   
   return false;
 }
+
+#ifdef ARDUINO_ARCH_ESP32
+byte PinManagerClass::allocateLedc(byte channels)
+{
+  if (channels > 16 || channels == 0) return 255;
+  byte ca = 0;
+  for (byte i = 0; i < 16; i++) {
+    byte by = i >> 3;
+    byte bi = i - 8*by;
+    if (bitRead(ledcAlloc[by], bi)) { //found occupied pin
+      ca = 0;
+    } else {
+      ca++;
+    }
+    if (ca >= channels) { //enough free channels
+      byte in = (i + 1) - ca;
+      for (byte j = 0; j < ca; j++) {
+        byte b = in + j;
+        byte by = b >> 3;
+        byte bi = b - 8*by;
+        bitWrite(ledcAlloc[by], bi, true);
+      }
+      return in;
+    }
+  }
+  return 255; //not enough consecutive free LEDC channels
+}
+
+void PinManagerClass::deallocateLedc(byte pos, byte channels)
+{
+  for (byte j = pos; j < pos + channels; j++) {
+    if (j > 16) return;
+    byte by = j >> 3;
+    byte bi = j - 8*by;
+    bitWrite(ledcAlloc[by], bi, false);
+  }
+}
+#endif

wled00/usermods_list.cpp

@@ -13,7 +13,9 @@
 #ifdef USERMOD_DALLASTEMPERATURE
 #include "../usermods/Temperature/usermod_temperature.h"
 #endif
+
 //#include "usermod_v2_empty.h"
+
 #ifdef USERMOD_BUZZER
 #include "../usermods/buzzer/usermod_v2_buzzer.h"
 #endif
@@ -21,6 +23,11 @@
 #include "usermod_v2_SensorsToMqtt.h"
 #endif
 
+// BME280 v2 usermod. Define "USERMOD_BME280" in my_config.h
+#ifdef USERMOD_BME280
+#include "../usermods/BME280_v2/usermod_bme280.h"
+#endif
+
 void registerUsermods()
 {
 /*
@@ -28,15 +35,19 @@ void registerUsermods()
    * || || ||
    * \/ \/ \/
    */
-//usermods.add(new MyExampleUsermod());
+  //usermods.add(new MyExampleUsermod());
-#ifdef USERMOD_DALLASTEMPERATURE
+  
+  #ifdef USERMOD_DALLASTEMPERATURE
   usermods.add(new UsermodTemperature());
-#endif
+  #endif
-//usermods.add(new UsermodRenameMe());
+  
-#ifdef USERMOD_BUZZER
+  //usermods.add(new UsermodRenameMe());
+  
+  #ifdef USERMOD_BUZZER
   usermods.add(new BuzzerUsermod());
-#endif
+  #endif
-#ifdef USERMOD_SENSORSTOMQTT
+  
-  usermods.add(new UserMod_SensorsToMQTT());
+  #ifdef USERMOD_BME280
-#endif
+  usermods.add(new UsermodBME280());
+  #endif
 }

wled00/wled.h

@@ -500,7 +500,6 @@ WLED_GLOBAL JsonDocument* fileDoc;
 WLED_GLOBAL bool doCloseFile _INIT(false);
 
 // presets
-WLED_GLOBAL uint16_t savedPresets _INIT(0);
 WLED_GLOBAL int16_t currentPreset _INIT(-1);
 WLED_GLOBAL bool isPreset _INIT(false);
 

wled00/wled_server.cpp

@@ -39,9 +39,15 @@ void initServer()
   DefaultHeaders::Instance().addHeader(F("Access-Control-Allow-Methods"), "*");
   DefaultHeaders::Instance().addHeader(F("Access-Control-Allow-Headers"), "*");
 
-  server.on("/liveview", HTTP_GET, [](AsyncWebServerRequest *request){
+ #ifdef WLED_ENABLE_WEBSOCKETS
-    request->send_P(200, "text/html", PAGE_liveview);
+    server.on("/liveview", HTTP_GET, [](AsyncWebServerRequest *request){
-  });
+      request->send_P(200, "text/html", PAGE_liveviewws);
+    });
+ #else
+    server.on("/liveview", HTTP_GET, [](AsyncWebServerRequest *request){
+      request->send_P(200, "text/html", PAGE_liveview);
+    });
+  #endif
   
   //settings page
   server.on("/settings", HTTP_GET, [](AsyncWebServerRequest *request){