Release of WLED 0.4 - the BLINKEN update

Added setting to change default boot preset
Changed default NTP server
Removed keywords.txt from dependencies because IDE would consider it as an (invalid) library
Updated readme
Updated binaries to 0.4

readme.md

@@ -1,17 +1,21 @@
+## Welcome to my project WLED!
+
 WLED is a basic, fast and (relatively) secure implementation of a ESP8266 webserver to control Neopixel (WS2812B) leds
 
-Uses ESP arduino version 2.3.0 (latest as of October 2017).
+Uses ESP Arduino core version 2.3.0 (latest as of December 2017).
-Contents in the /data directory may be uploaded to SPIFFS.
 
-Features: (V0.4)
+### Features: (V0.4)
 - RGB, HSB, and brightness sliders
 - Settings page - configuration over network
 - Access Point and station mode - automatic failsafe AP
-- WS2812FX library integrated for nearly 50 special effects!
+- WS2812FX library integrated for over 50 special effects!
+- Secondary color support lets you use even more effect combinations
 - Support for RGBW strips
+- 25 user presets! Save your favorite colors and effects and apply them easily!
 - Nightlight function (gradually dims down)
 - Notifier function (multiple ESPs sync color via UDP broadcast)
 - Support for power pushbutton
+- Custom Theater Chase
 - Full OTA software update capability
 - Password protected OTA page for added security (OTA lock)
 - Alexa smart home device server
@@ -19,26 +23,24 @@ Features: (V0.4)
 - client HTML controlled
 - Edit page. Change html and other files via OTA. (needs to be enabled in source)
 
-Compile settings:
+### Compile settings:
-Board: WeMos D1 mini (untested with other HW, should work though)
+- Board: WeMos D1 mini (untested with other HW, should work though)
-CPU frequency: 80 MHz
+- CPU frequency: 80 MHz
-Flash size : 4MB (3MB SPIFFS)
+- Flash size : 4MB (3MB SPIFFS)
-Upload speed: 921600
+- Upload speed: 921600
 
-
+### Quick start guide:
-Quick start guide:
 
 - If you do not plan to change the software, you can use the supplied binary files instead-
-Just flash a basic HTTP OTA updater sketch and upload the bin!
+Just flash a [basic HTTP OTA updater](https://github.com/Aircoookie/ESP8266MinimalHTTPUpdater) sketch and upload the bin!
 
-
+1. Connect a  WS2812B RGB led strip to GPIO2. Optionally connect a NO-pushbutton to GPIO0 (internal pull-up) and ground.
-1. Make sure your ESP module has a min. 4MB SPI flash module. (SHOULD now support 1MB modules, untested)
-Connect a  WS2812B RGB led strip to GPIO2. Optionally connect a NO-pushbutton to GPIO0 (internal pull-up) and ground.
 
 2. Follow a guide to setup your Arduino client (I am using version 1.8.1) with the ESP8266 libraries.
 For current compiles I use version 2.3.0.
 
 3. In file "wled00.ino", you should change the access point and OTA update passphrases for added security (you can change them later, this is just the "factory default"). Flash the sketch.
+You will need to install the NeoPixelBus library by Makuna. All other dependencies are included with WLED for convenience.
 
 5. Connect to automatically started WiFi access point "WLED-AP" using default passwort "wled1234". Go to the IP "192.168.4.1".
 
@@ -46,35 +48,39 @@ For current compiles I use version 2.3.0.
 
 7. Have fun with the software!
 
-
+### Advanced module control via HTTP requests API:
-Advanced module control via HTTP requests:
 
 Base URL scheme: "<moduleip>/win". This will return a XML file with some current values.
 Add one or multiple of the following parameters after the base url to change values:
-"&A=<0-255>" set LED brightness (yellow slider)
+- "&A=<0-255>" set LED brightness (yellow slider)
-"&R=<0-255>" set LED red value (red slider)
+- "&R=<0-255>" set LED red value (red slider)
-"&G=<0-255>" set LED green value (green slider)
+- "&G=<0-255>" set LED green value (green slider)
-"&B=<0-255>" set LED blue value (blue slider)
+- "&B=<0-255>" set LED blue value (blue slider)
-"&W=<0-255>" set LED white value (white slider) (only when RGBW enabled)
+- "&W=<0-255>" set LED white value (white slider) (only when RGBW enabled)
-"&T=<0 or 1 or 2-255>" 0: switch off, on, toggle
+- "&T=<0 or 1 or 2-255>" 0: switch off, on, toggle
-"&FX=<0-47>" set LED effect (refer to WS2812FX library)
+- "&FX=<0-47>" set LED effect (refer to WS2812FX library)
-"&SX=<0-255>" set LED effect speed (refer to WS2812FX library)
+- "&SX=<0-255>" set LED effect speed (refer to WS2812FX library)
-"&RN=<0 or 1>" receive notifications on or off
+- "&RN=<0 or 1>" receive notifications on or off
-"&SN=<0 or 1>" send (direct) notifications on or off
+- "&SN=<0 or 1>" send (direct) notifications on or off
-"&NL=<0 or 1>" turns nightlight function on or off
+- "&NL=<0 or 1>" turns nightlight function on or off
-"&MD=<0 or 1>" sets client color picker mode (RGB/HSB)
+- "&MD=<0 or 1>" sets client color picker mode (RGB/HSB)
-("&OL=<0, 1, 3 or 5>" experimental clock overlays)
-("&I=<0-255>" experimental individual LED control)
-("&I=<0-255>&I2=<0-255>" experimental individual LED range control)
 
+(this list is incomplete, will be available in wiki)
+
+### Other
 
 Licensed under the MIT license 
 Uses libraries: 
 ESP8266 Arduino Core
-WS2812FX by kitesurfer1404 (Aircoookie fork) 
+NeoPixelBus by Makuna
+[WS2812FX](https://github.com/kitesurfer1404/WS2812FX) by kitesurfer1404 (Aircoookie fork)
+Time library
 Timezone library by JChristensen
 arduino-esp8266-alexa-multiple-wemo-switch by kakopappa
 
+Uses Linearicons by Perxis! (link in settings page)
+
+#### This information will be moved to the wiki soon:
 
 Software update procedure:
 
@@ -84,7 +90,6 @@ Method 2: The software has an integrated OTA software update capability.
 First you have to enable it by typing in the correct OTA passphrase (default: "wledota") in the settings menu.
 Remove the tick in the checkbox "OTA locked". Then save settings and reboot the ESP.
 Now you can go to "<moduleip>/update" to update binary firmware.
-To edit flash content (images and HTML), go to "<moduleip>/edit". (only if USEFS was uncommented in source)
 After you are done, it is recommended to lock the OTA function again.
 To do so, tick the checkbox again (you can change the passphrase by typing in a new one now). Reboot.
 If you try to access the update page now, you should see the message "OTA lock active".
@@ -104,9 +109,6 @@ You can adjust the position of the amplitude with the WARLS offset setting.
 Note that there is currently an issue preventing you from accessing the control web page while the script is running. HTTP requests work.
 
 
-Uses [WS2812FX](https://github.com/kitesurfer1404/WS2812FX)!
-
-
 
 
 

wled00/WS2812FX.h

@@ -1,4 +1,4 @@
-//#define RGBW
+#define RGBW
 
 /*
   WS2812FX.h - Library for WS2812 LED effects.

wled00/data/settings.htm

@@ -62,7 +62,8 @@
 		Use HSB sliders instead of RGB by default: <input type="checkbox" name="COLMD"> <br>
 		<h3>LED setup</h3>
 		LED count (max. 255): <input name="LEDCN" type="number" min="0" max="255" required> <br>
-		<i>The default boot color is saved in preset slot 0.</i><br>
+		<i>The default boot color is always saved in preset slot 0.</i><br>
+		Alternatively, apply preset <input name="BOOTP" type="number" min="0" max="25" required> at boot<br>
 		Default RGB color:
 		<input name="CLDFR" type="number" min="0" max="255" required>
 		<input name="CLDFG" type="number" min="0" max="255" required>

wled00/htmls01.h

@@ -62,6 +62,7 @@ Use HSB sliders instead of RGB by default: <input type="checkbox" name="COLMD">
 <h3>LED setup</h3>
 LED count (max. 255): <input name="LEDCN" type="number" min="0" max="255" required> <br>
 <i>The default boot color is saved in preset slot 0.</i><br>
+Alternatively, apply preset <input name="BOOTP" type="number" min="0" max="25" required> at boot<br>
 Default RGB color:
 <input name="CLDFR" type="number" min="0" max="255" required>
 <input name="CLDFG" type="number" min="0" max="255" required>

wled00/src/dependencies/time/keywords.txt

@@ -1,34 +0,0 @@
-#######################################
-# Syntax Coloring Map For Time
-#######################################
-
-#######################################
-# Datatypes (KEYWORD1)
-#######################################
-time_t	KEYWORD1
-#######################################
-# Methods and Functions (KEYWORD2)
-#######################################
-now	KEYWORD2
-second	KEYWORD2
-minute	KEYWORD2
-hour	KEYWORD2
-day	KEYWORD2
-month	KEYWORD2
-year	KEYWORD2
-isAM	KEYWORD2
-isPM	KEYWORD2
-weekday	KEYWORD2
-setTime	KEYWORD2
-adjustTime	KEYWORD2
-setSyncProvider	KEYWORD2
-setSyncInterval	KEYWORD2
-timeStatus	KEYWORD2
-TimeLib	KEYWORD2
-#######################################
-# Instances (KEYWORD2)
-#######################################
-
-#######################################
-# Constants (LITERAL1)
-#######################################

wled00/src/dependencies/timezone/keywords.txt

@@ -1,8 +0,0 @@
-TimeChangeRule	KEYWORD1
-Timezone	KEYWORD1
-toLocal	KEYWORD2
-toUTC	KEYWORD2
-utcIsDST	KEYWORD2
-locIsDST	KEYWORD2
-readRules	KEYWORD2
-writeRules	KEYWORD2

wled00/wled00.ino

@@ -20,7 +20,7 @@
 #include "WS2812FX.h"
 
 //version in format yymmddb (b = daily build)
-#define VERSION 1712111
+#define VERSION 1712121
 
 //If you have an RGBW strip, uncomment first line in WS2812FX.h!
 
@@ -48,19 +48,20 @@
 #endif
 
 //eeprom Version code, enables default settings instead of 0 init on update
-#define EEPVER 2
+#define EEPVER 3
 //0 -> old version, default
 //1 -> 0.4p 1711272 and up
 //2 -> 0.4p 1711302 and up
+//3 -> 0.4  1712121 and up
 
 /*
  * @title WLED project sketch
- * @version 0.4p
+ * @version 0.4
  * @author Christian Schwinne
  */
 //Hardware-settings (only changeble via code)
-#define LEDCOUNT 93 //maximum, exact count set-able via settings
+#define LEDCOUNT 255 //maximum, exact count set-able via settings
-#define MAXDIRECT 93 //for direct access like arls, should be >= LEDCOUNT
+#define MAXDIRECT 255 //for direct access like arls, should be >= LEDCOUNT
 uint8_t buttonPin = 0; //needs pull-up
 uint8_t auxPin = 15; //use e.g. for external relay
 uint8_t auxDefaultState = 0; //0: input 1: high 2: low
@@ -78,7 +79,7 @@ time_t local;
 
 //Default CONFIG
 uint8_t ledcount = 93;
-String serverDescription = "WLED 0.4p";
+String serverDescription = "WLED 0.4";
 String clientssid = "Your_Network_Here";
 String clientpass = "Dummy_Pass";
 String cmdns = "led";
@@ -92,9 +93,10 @@ IPAddress staticgateway(0, 0, 0, 0);
 IPAddress staticsubnet(255, 255, 255, 0);
 boolean useHSB = false, useHSBDefault = false;
 boolean turnOnAtBoot = true;
+uint8_t bootPreset = 0;
 byte col_s[]{255, 159, 0};
 byte col_sec_s[]{0, 0, 0};
-boolean useRGBW = false;
+boolean useRGBW = true;
 byte white_s = 0;
 byte white_sec_s = 0;
 byte bri_s = 127;
@@ -116,7 +118,7 @@ uint8_t effectSpeedDefault = 75;
 //NTP stuff
 boolean ntpEnabled = false;
 IPAddress ntpServerIP;
-const char* ntpServerName = "time.nist.gov";
+const char* ntpServerName = "pool.ntp.org";
 //custom chase
 uint8_t cc_numPrimary = 2;
 uint8_t cc_numSecondary = 4;

wled00/wled01_eeprom.ino

@@ -120,6 +120,7 @@ void saveSettingsToEEPROM()
   EEPROM.write(386, cc_fromStart);
   EEPROM.write(387, cc_fromEnd);
   EEPROM.write(388, cc_step);
+  EEPROM.write(389, bootPreset);
   EEPROM.commit();
 }
 
@@ -256,7 +257,7 @@ void loadSettingsFromEEPROM(bool first)
     cc_step = EEPROM.read(388);
     strip.setCustomChase(cc_index1, cc_index2, cc_start, cc_numPrimary, cc_numSecondary, cc_step, cc_fromStart, cc_fromEnd);
   }
-  
+  bootPreset = EEPROM.read(389);
 
   //favorite setting memory (25 slots/ each 20byte)
   //400 - 899 reserved

wled00/wled02_xml.ino

@@ -104,6 +104,7 @@ String getSettings()
     resp += ds + "CLDFW" + v + "-1;";
   }
   resp += ds + "BOOTN" + c + turnOnAtBoot +";";
+  resp += ds + "BOOTP" + v + bootPreset +";";
   resp += ds + "FXDEF" + v + effectDefault +";";
   resp += ds + "SXDEF" + v + effectSpeedDefault +";";
   resp += ds + "GCBRI" + c + useGammaCorrectionBri +";";
@@ -161,7 +162,7 @@ String getSettings()
     resp += "Not active";
   }
   resp += "\";";
-  resp += dg + "(\"msg\")[0]" + ih + "\"WLED 0.4p (build " + VERSION + ") OK\";";
+  resp += dg + "(\"msg\")[0]" + ih + "\"WLED 0.4 (build " + VERSION + ") OK\";";
   
   return resp;
 }

wled00/wled03_set.ino

@@ -164,6 +164,11 @@ void handleSettingsSet()
       if (i >= 0 && i <= 255) bri_s = i;
     }
     turnOnAtBoot = server.hasArg("BOOTN");
+    if (server.hasArg("BOOTP"))
+    {
+      int i = server.arg("BOOTP").toInt();
+      if (i >= 0 && i <= 25) bootPreset = i;
+    }
     if (server.hasArg("FXDEF"))
     {
       int i = server.arg("FXDEF").toInt();

wled00/wled05_init.ino

@@ -161,6 +161,7 @@ void wledInit()
   strip.setSpeed(effectSpeed);
   strip.setBrightness(255);
   strip.start();
+  if (bootPreset>0) applyPreset(bootPreset, turnOnAtBoot, true, true);
   colorUpdated(0);
   pinMode(buttonPin, INPUT_PULLUP);
 }