Added new user mod for Wemos shield (#701)
This commit is contained in:
parent
1a4061fdb5
commit
a0b208cca0
23
usermods/Wemos_D1_mini+Wemos32_mini_shield/readme.md
Normal file
23
usermods/Wemos_D1_mini+Wemos32_mini_shield/readme.md
Normal file
@ -0,0 +1,23 @@
|
||||
# Wemos D1 mini and Wemos32 mini shield
|
||||
## Project repository
|
||||
- [Original repository](https://github.com/srg74/WLED-wemos-shield) - WLED Wemos shield repository
|
||||
- [Wemos shield project Wiki](https://github.com/srg74/WLED-wemos-shield/wiki)
|
||||
- [Precompiled WLED firmware](https://github.com/srg74/WLED-wemos-shield/tree/master/resources/Firmware)
|
||||
## Features
|
||||
- SSD1306 128x32 or 128x64 I2C OLED display
|
||||
- On screen IP address, SSID and controller status (e.g. ON or OFF, recent effect)
|
||||
- Auto display shutoff for saving display lifetime
|
||||
- Dallas temperature sensor
|
||||
- Reporting temperature to MQTT broker
|
||||
- Relay for energy saving
|
||||
|
||||
## Hardware
|
||||
![Shield](https://github.com/srg74/WLED-wemos-shield/blob/master/resources/Images/Assembly_8.jpg)
|
||||
|
||||
## Functionality checked with
|
||||
- Wemos D1 mini original v3.1 and clones
|
||||
- Wemos32 mini
|
||||
- PlatformIO
|
||||
- SSD1306 128x32 I2C OLED display
|
||||
- DS18B20 (temperature sensor)
|
||||
- Push button (N.O. momentary switch)
|
216
usermods/Wemos_D1_mini+Wemos32_mini_shield/wled06_usermod.ino
Normal file
216
usermods/Wemos_D1_mini+Wemos32_mini_shield/wled06_usermod.ino
Normal file
@ -0,0 +1,216 @@
|
||||
#include <U8x8lib.h> // from https://github.com/olikraus/u8g2/
|
||||
#include <DallasTemperature.h> //Dallastemperature sensor
|
||||
#ifdef ARDUINO_ARCH_ESP32 //ESP32 boards
|
||||
uint8_t SCL_PIN = 22;
|
||||
uint8_t SDA_PIN = 21;
|
||||
OneWire oneWire(23);
|
||||
#else //ESP8266 boards
|
||||
uint8_t SCL_PIN = 5;
|
||||
uint8_t SDA_PIN = 4;
|
||||
OneWire oneWire(13);
|
||||
#endif
|
||||
//The SCL and SDA pins are defined here.
|
||||
//ESP8266 Wemos D1 mini board use SCL=5 SDA=4 while ESP32 Wemos32 mini board use SCL=22 SDA=21
|
||||
#define U8X8_PIN_SCL SCL_PIN
|
||||
#define U8X8_PIN_SDA SDA_PIN
|
||||
|
||||
// Dallas sensor
|
||||
DallasTemperature sensor(&oneWire);
|
||||
long temptimer = millis();
|
||||
long lastMeasure = 0;
|
||||
#define Celsius // Show temperature mesaurement in Celcius otherwise is in Fahrenheit
|
||||
|
||||
// If display does not work or looks corrupted check the
|
||||
// constructor reference:
|
||||
// https://github.com/olikraus/u8g2/wiki/u8x8setupcpp
|
||||
// or check the gallery:
|
||||
// https://github.com/olikraus/u8g2/wiki/gallery
|
||||
// --> First choise of cheap I2C OLED 128X32 0.91"
|
||||
U8X8_SSD1306_128X32_UNIVISION_HW_I2C u8x8(U8X8_PIN_NONE, U8X8_PIN_SCL, U8X8_PIN_SDA); // Pins are Reset, SCL, SDA
|
||||
// --> Second choise of cheap I2C OLED 128X64 0.96" or 1.3"
|
||||
//U8X8_SSD1306_128X64_NONAME_HW_I2C u8x8(U8X8_PIN_NONE, U8X8_PIN_SCL, U8X8_PIN_SDA); // Pins are Reset, SCL, SDA
|
||||
// gets called once at boot. Do all initialization that doesn't depend on
|
||||
// network here
|
||||
void userSetup() {
|
||||
sensor.begin(); //Start Dallas temperature sensor
|
||||
u8x8.begin();
|
||||
u8x8.setPowerSave(0);
|
||||
u8x8.setFlipMode(1);
|
||||
u8x8.setContrast(10); //Contrast setup will help to preserve OLED lifetime. In case OLED need to be brighter increase number up to 255
|
||||
u8x8.setFont(u8x8_font_chroma48medium8_r);
|
||||
u8x8.drawString(0, 0, "Loading...");
|
||||
}
|
||||
|
||||
// gets called every time WiFi is (re-)connected. Initialize own network
|
||||
// interfaces here
|
||||
void userConnected() {}
|
||||
|
||||
// needRedraw marks if redraw is required to prevent often redrawing.
|
||||
bool needRedraw = true;
|
||||
|
||||
// Next variables hold the previous known values to determine if redraw is
|
||||
// required.
|
||||
String knownSsid = "";
|
||||
IPAddress knownIp;
|
||||
uint8_t knownBrightness = 0;
|
||||
uint8_t knownMode = 0;
|
||||
uint8_t knownPalette = 0;
|
||||
|
||||
long lastUpdate = 0;
|
||||
long lastRedraw = 0;
|
||||
bool displayTurnedOff = false;
|
||||
// How often we are redrawing screen
|
||||
#define USER_LOOP_REFRESH_RATE_MS 5000
|
||||
|
||||
void userLoop() {
|
||||
|
||||
//----> Dallas temperature sensor MQTT publishing
|
||||
temptimer = millis();
|
||||
// Timer to publishe new temperature every 60 seconds
|
||||
if (temptimer - lastMeasure > 60000)
|
||||
{
|
||||
lastMeasure = temptimer;
|
||||
//Check if MQTT Connected, otherwise it will crash the 8266
|
||||
if (mqtt != nullptr)
|
||||
{
|
||||
sensor.requestTemperatures();
|
||||
//Gets prefered temperature scale based on selection in definitions section
|
||||
#ifdef Celsius
|
||||
float board_temperature = sensor.getTempCByIndex(0);
|
||||
#else
|
||||
float board_temperature = sensor.getTempFByIndex(0);
|
||||
#endif
|
||||
//Create character string populated with user defined device topic from the UI, and the read temperature. Then publish to MQTT server.
|
||||
char subuf[38];
|
||||
strcpy(subuf, mqttDeviceTopic);
|
||||
strcat(subuf, "/temperature");
|
||||
mqtt->publish(subuf, 0, true, String(board_temperature).c_str());
|
||||
}
|
||||
}
|
||||
|
||||
// Check if we time interval for redrawing passes.
|
||||
if (millis() - lastUpdate < USER_LOOP_REFRESH_RATE_MS) {
|
||||
return;
|
||||
}
|
||||
lastUpdate = millis();
|
||||
|
||||
// Turn off display after 3 minutes with no change.
|
||||
if(!displayTurnedOff && millis() - lastRedraw > 3*60*1000) {
|
||||
u8x8.setPowerSave(1);
|
||||
displayTurnedOff = true;
|
||||
}
|
||||
|
||||
// Check if values which are shown on display changed from the last time.
|
||||
if (((apActive) ? String(apSSID) : WiFi.SSID()) != knownSsid) {
|
||||
needRedraw = true;
|
||||
} else if (knownIp != (apActive ? IPAddress(4, 3, 2, 1) : WiFi.localIP())) {
|
||||
needRedraw = true;
|
||||
} else if (knownBrightness != bri) {
|
||||
needRedraw = true;
|
||||
} else if (knownMode != strip.getMode()) {
|
||||
needRedraw = true;
|
||||
} else if (knownPalette != strip.getSegment(0).palette) {
|
||||
needRedraw = true;
|
||||
}
|
||||
|
||||
if (!needRedraw) {
|
||||
return;
|
||||
}
|
||||
needRedraw = false;
|
||||
|
||||
if (displayTurnedOff)
|
||||
{
|
||||
u8x8.setPowerSave(0);
|
||||
displayTurnedOff = false;
|
||||
}
|
||||
lastRedraw = millis();
|
||||
|
||||
// Update last known values.
|
||||
#if defined(ESP8266)
|
||||
knownSsid = apActive ? WiFi.softAPSSID() : WiFi.SSID();
|
||||
#else
|
||||
knownSsid = WiFi.SSID();
|
||||
#endif
|
||||
knownIp = apActive ? IPAddress(4, 3, 2, 1) : WiFi.localIP();
|
||||
knownBrightness = bri;
|
||||
knownMode = strip.getMode();
|
||||
knownPalette = strip.getSegment(0).palette;
|
||||
u8x8.clear();
|
||||
u8x8.setFont(u8x8_font_chroma48medium8_r);
|
||||
|
||||
// First row with Wifi name
|
||||
u8x8.setCursor(1, 0);
|
||||
u8x8.print(knownSsid.substring(0, u8x8.getCols() > 1 ? u8x8.getCols() - 2 : 0));
|
||||
// Print `~` char to indicate that SSID is longer, than owr dicplay
|
||||
if (knownSsid.length() > u8x8.getCols())
|
||||
u8x8.print("~");
|
||||
|
||||
// Second row with IP or Psssword
|
||||
u8x8.setCursor(1, 1);
|
||||
// Print password in AP mode and if led is OFF.
|
||||
if (apActive && bri == 0)
|
||||
u8x8.print(apPass);
|
||||
else
|
||||
u8x8.print(knownIp);
|
||||
|
||||
// Third row with mode name
|
||||
u8x8.setCursor(2, 2);
|
||||
uint8_t qComma = 0;
|
||||
bool insideQuotes = false;
|
||||
uint8_t printedChars = 0;
|
||||
char singleJsonSymbol;
|
||||
|
||||
// Find the mode name in JSON
|
||||
for (size_t i = 0; i < strlen_P(JSON_mode_names); i++) {
|
||||
singleJsonSymbol = pgm_read_byte_near(JSON_mode_names + i);
|
||||
switch (singleJsonSymbol) {
|
||||
case '"':
|
||||
insideQuotes = !insideQuotes;
|
||||
break;
|
||||
case '[':
|
||||
case ']':
|
||||
break;
|
||||
case ',':
|
||||
qComma++;
|
||||
default:
|
||||
if (!insideQuotes || (qComma != knownMode))
|
||||
break;
|
||||
u8x8.print(singleJsonSymbol);
|
||||
printedChars++;
|
||||
}
|
||||
if ((qComma > knownMode) || (printedChars > u8x8.getCols() - 2))
|
||||
break;
|
||||
}
|
||||
// Fourth row with palette name
|
||||
u8x8.setCursor(2, 3);
|
||||
qComma = 0;
|
||||
insideQuotes = false;
|
||||
printedChars = 0;
|
||||
// Looking for palette name in JSON.
|
||||
for (size_t i = 0; i < strlen_P(JSON_palette_names); i++) {
|
||||
singleJsonSymbol = pgm_read_byte_near(JSON_palette_names + i);
|
||||
switch (singleJsonSymbol) {
|
||||
case '"':
|
||||
insideQuotes = !insideQuotes;
|
||||
break;
|
||||
case '[':
|
||||
case ']':
|
||||
break;
|
||||
case ',':
|
||||
qComma++;
|
||||
default:
|
||||
if (!insideQuotes || (qComma != knownPalette))
|
||||
break;
|
||||
u8x8.print(singleJsonSymbol);
|
||||
printedChars++;
|
||||
}
|
||||
if ((qComma > knownMode) || (printedChars > u8x8.getCols() - 2))
|
||||
break;
|
||||
}
|
||||
|
||||
u8x8.setFont(u8x8_font_open_iconic_embedded_1x1);
|
||||
u8x8.drawGlyph(0, 0, 80); // wifi icon
|
||||
u8x8.drawGlyph(0, 1, 68); // home icon
|
||||
u8x8.setFont(u8x8_font_open_iconic_weather_2x2);
|
||||
u8x8.drawGlyph(0, 2, 66 + (bri > 0 ? 3 : 0)); // sun/moon icon
|
||||
}
|
Loading…
Reference in New Issue
Block a user