Merge branch 'master' into dev

Retained GPIO16 as default on ESP32.

CHANGELOG.md

@@ -2,7 +2,18 @@
 
 ### Builds after release 0.12.0
 
-#### Build 2111160
+#### Build 2111220
+
+-   Fixed preset cycle not working from preset called by UI
+-   Reintroduced permanent min. and max. cycle bounds
+
+#### Build 2111190
+
+-   Changed default ESP32 LED pin from 16 to 2
+-   Renamed "Running 2" to "Chase 2"
+-   Renamed "Tri Chase" to "Chase 3"
+
+#### Build 2111170
 
 -   Version bump to 0.13.0-b5 "Toki"
 -   Improv Serial support (PR #2334)
@@ -388,6 +399,7 @@
 -   Added support for WESP32 ethernet board (PR #1764)
 -   Added Caching for main UI (PR #1704)
 -   Added Tetrix mode (PR #1729)
+-   Removed Merry Christmas mode (use "Chase 2" - called Running 2 before 0.13.0)
 -   Added memory check on Bus creation
 
 #### Build 2102050

readme.md

@@ -51,7 +51,7 @@ A fast and feature-rich implementation of an ESP8266/ESP32 webserver to control
 
 See the [documentation on our official site](https://kno.wled.ge)!
 
-[On this page](https://github.com/Aircoookie/WLED/wiki/Learning-the-ropes) you can find excellent tutorials made by the community and helpful tools to help you get your new lamp up and running!
+[On this page](https://kno.wled.ge/basics/tutorials/) you can find excellent tutorials made by the community and helpful tools to help you get your new lamp up and running!
 
 ## 🖼️ Images
 <img src="/images/macbook-pro-space-gray-on-the-wooden-table.jpg" width="50%"><img src="/images/walking-with-iphone-x.jpg" width="50%">
@@ -82,7 +82,7 @@ Any | 5v 3-pin ARGB for PC | Any PC RGB device that supports the 5v 3-pin ARGB m
 ## ✌️ Other
 
 Licensed under the MIT license  
-Credits [here](https://github.com/Aircoookie/WLED/wiki/Contributors-&-About)!
+Credits [here](https://kno.wled.ge/about/contributors/)!
 
 Uses Linearicons by Perxis!
 

wled00/FX.h

@@ -967,7 +967,7 @@ const char JSON_mode_names[] PROGMEM = R"=====([
 "Colorful",
 "Traffic Light",
 "Sweep Random",
-"Running 2@!,Width;!,!,;!",
+"Chase 2@!,Width;!,!,;!",
 "Aurora",
 "Stream",
 "Scanner",
@@ -984,7 +984,7 @@ const char JSON_mode_names[] PROGMEM = R"=====([
 "Two Areas@!,Size;1,2,Bg;!",
 "Running Dual",
 "Halloween",
-"Tri Chase@!,Size;1,2,3;",
+"Chase 3@!,Size;1,2,3;",
 "Tri Wipe@!,Width;1,2,3;",
 "Tri Fade",
 "Lightning",

wled00/const.h

@@ -320,8 +320,8 @@
 #ifdef WLED_ENABLE_DMX
 #if (LEDPIN == 2)
   #undef LEDPIN
-  #define LEDPIN 3
+  #define LEDPIN 1
-  #warning "Pin conflict compiling with DMX and LEDs on pin 2. The default LED pin has been changed to pin 3."
+  #warning "Pin conflict compiling with DMX and LEDs on pin 2. The default LED pin has been changed to pin 1."
 #endif
 #endif
 

wled00/json.cpp

@@ -355,10 +355,11 @@ bool deserializeState(JsonObject root, byte callMode, byte presetId)
       deletePreset(ps);
     }
 
-    if (getVal(root["ps"], &presetCycCurr, 1, 5)) { //load preset (clears state request!)
+    ps = presetCycCurr;
-      DEBUG_PRINTLN(F("Applying preset"));
+    if (getVal(root["ps"], &ps, presetCycMin, presetCycMax)) { //load preset (clears state request!)
       if (!presetId) unloadPlaylist(); //stop playlist if preset changed manually
-      applyPreset(presetCycCurr, callMode);
+      if (ps >= presetCycMin && ps <= presetCycMax) presetCycCurr = ps;
+      applyPreset(ps, callMode);
       return stateResponse;
     }
 

wled00/set.cpp

@@ -538,6 +538,7 @@ void parseNumber(const char* str, byte* val, byte minv, byte maxv)
     const char* str2 = strchr(str,'~'); //min/max range (for preset cycle, e.g. "1~5~")
     if (str2) {
       byte p2 = atoi(str2+1);
+      presetCycMin = p1; presetCycMax = p2;
       while (isdigit((str2+1)[0])) str2++;
       parseNumber(str2+1, val, p1, p2);
     } else {
@@ -646,17 +647,14 @@ bool handleSet(AsyncWebServerRequest *request, const String& req, bool apply)
   pos = req.indexOf(F("PS=")); //saves current in preset
   if (pos > 0) savePreset(getNumVal(&req, pos));
 
-  byte presetCycleMin = 1;
-  byte presetCycleMax = 5;
-
   pos = req.indexOf(F("P1=")); //sets first preset for cycle
-  if (pos > 0) presetCycleMin = getNumVal(&req, pos);
+  if (pos > 0) presetCycMin = getNumVal(&req, pos);
 
   pos = req.indexOf(F("P2=")); //sets last preset for cycle
-  if (pos > 0) presetCycleMax = getNumVal(&req, pos);
+  if (pos > 0) presetCycMax = getNumVal(&req, pos);
 
   //apply preset
-  if (updateVal(&req, "PL=", &presetCycCurr, presetCycleMin, presetCycleMax)) {
+  if (updateVal(&req, "PL=", &presetCycCurr, presetCycMin, presetCycMax)) {
     applyPreset(presetCycCurr);
   }
 

wled00/wled.h

@@ -8,7 +8,7 @@
  */
 
 // version code in format yymmddb (b = daily build)
-#define VERSION 2111211
+#define VERSION 2111220
 
 //uncomment this if you have a "my_config.h" file you'd like to use
 //#define WLED_USE_MY_CONFIG
@@ -520,6 +520,8 @@ WLED_GLOBAL byte improvError _INIT(0);
 WLED_GLOBAL int16_t currentPlaylist _INIT(-1);
 //still used for "PL=~" HTTP API command
 WLED_GLOBAL byte presetCycCurr _INIT(0);
+WLED_GLOBAL byte presetCycMin _INIT(1);
+WLED_GLOBAL byte presetCycMax _INIT(5); 
 
 // realtime
 WLED_GLOBAL byte realtimeMode _INIT(REALTIME_MODE_INACTIVE);