lba.gitea/WLED
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge branch 'master' into dev

Browse Source
This commit is contained in:
Blaž Kristan 2021-10-07 13:47:36 +02:00
commit bddd22cfab
25 changed files with 2673 additions and 930 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
CHANGELOG.md
View File

@ -2,6 +2,13 @@
### Builds after release 0.12.0
#### Build 2110060
- Added virtual network DDP busses (PR #2245)
- Allow playlist as end preset in playlist
- Improved bus start field UX
- Pin reservations improvements (PR #2214)
#### Build 2109220
- Version bump to 0.13.0-b3 "Toki"

2
usermods/PWM_fan/usermod_PWM_fan.h
View File

@ -180,7 +180,7 @@ class PWMFanUsermod : public Usermod {
#endif
initTacho();
initPWMfan();
updateFanSpeed((minPWMValuePct * 255) / 100);
updateFanSpeed((minPWMValuePct * 255) / 100); // inital fan speed
initDone = true;
}

BIN
usermods/battery_status_basic/assets/battery_connection_schematic_01.png Normal file
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 48 KiB

BIN
usermods/battery_status_basic/assets/battery_connection_schematic_02.png Normal file
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 46 KiB

BIN
usermods/battery_status_basic/assets/battery_info_screen.png Normal file
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 68 KiB

16
usermods/battery_status_basic/readme.md
View File

@ -2,16 +2,25 @@
This Usermod allows you to monitor the battery level of your battery powered project.
You can see the battery level in the `info modal` right under the `estimated current`.
You can see the battery level and voltage in the `info modal`.
For this to work the positive side of the (18650) battery must be connected to pin `A0` of the d1mini/esp8266 with a 100k ohm resistor (see [Useful Links](#useful-links)).
If you have a esp32 board it is best to connect the positive side of the battery to ADC1 (GPIO32 - GPIO39)
<p align="center">
<img width="300" src="assets/battery_info_screen.png">
</p>
## Installation
define `USERMOD_BATTERY_STATUS_BASIC` in `my_config.h`
### Basic wiring diagram
<p align="center">
<img width="300" src="assets/battery_connection_schematic_01.png">
</p>
### Define Your Options
* `USERMOD_BATTERY_STATUS_BASIC` - define this (in `my_config.h`) to have this user mod included wled00\usermods_list.cpp
@ -45,6 +54,11 @@ Specification from: [Molicel INR18650-M35A, 3500mAh 10A Lithium-ion battery, 3.
* https://arduinodiy.wordpress.com/2016/12/25/monitoring-lipo-battery-voltage-with-wemos-d1-minibattery-shield-and-thingspeak/
## Change Log
2021-09-02
* added "Battery voltage" to info
* added circuit diagram to readme
* added MQTT support, sending battery voltage
* minor fixes
2021-08-15
* changed `USERMOD_BATTERY_MIN_VOLTAGE` to 2.6 volt as default for 18650 batteries

90
usermods/battery_status_basic/usermod_v2_battery_status_basic.h
View File

@ -29,7 +29,7 @@
#endif
// the frequency to check the battery, 1 minute
// the frequency to check the battery, 30 sec
#ifndef USERMOD_BATTERY_MEASUREMENT_INTERVAL
#define USERMOD_BATTERY_MEASUREMENT_INTERVAL 30000
#endif
@ -53,7 +53,8 @@ class UsermodBatteryBasic : public Usermod
int8_t batteryPin = USERMOD_BATTERY_MEASUREMENT_PIN;
// how often to read the battery voltage
unsigned long readingInterval = USERMOD_BATTERY_MEASUREMENT_INTERVAL;
unsigned long lastTime = 0;
unsigned long nextReadTime = 0;
unsigned long lastReadTime = 0;
// battery min. voltage
float minBatteryVoltage = USERMOD_BATTERY_MIN_VOLTAGE;
// battery max. voltage
@ -68,6 +69,7 @@ class UsermodBatteryBasic : public Usermod
// mapped battery level based on voltage
long batteryLevel = 0;
bool initDone = false;
bool initializing = true;
// strings to reduce flash memory usage (used more than twice)
@ -82,6 +84,19 @@ class UsermodBatteryBasic : public Usermod
return (x - in_min) * (out_max - out_min) / (in_max - in_min) + out_min;
}
float truncate(float val, byte dec)
{
float x = val * pow(10, dec);
float y = round(x);
float z = x - y;
if ((int)z == 5)
{
y++;
}
x = y / pow(10, dec);
return x;
}
public:
@ -107,6 +122,9 @@ class UsermodBatteryBasic : public Usermod
pinMode(batteryPin, INPUT);
#endif
nextReadTime = millis() + readingInterval;
lastReadTime = millis();
initDone = true;
}
@ -129,26 +147,38 @@ class UsermodBatteryBasic : public Usermod
{
if(strip.isUpdating()) return;
unsigned long now = millis();
// check the battery level every USERMOD_BATTERY_MEASUREMENT_INTERVAL (ms)
if (now - lastTime >= readingInterval) {
if (millis() < nextReadTime) return;
// read battery raw input
rawValue = analogRead(batteryPin);
// calculate the voltage
voltage = (rawValue / adcPrecision) * maxBatteryVoltage ;
nextReadTime = millis() + readingInterval;
lastReadTime = millis();
initializing = false;
// translate battery voltage into percentage
/*
the standard "map" function doesn't work
https://www.arduino.cc/reference/en/language/functions/math/map/ notes and warnings at the bottom
*/
batteryLevel = mapf(voltage, minBatteryVoltage, maxBatteryVoltage, 0, 100);
// read battery raw input
rawValue = analogRead(batteryPin);
lastTime = now;
// calculate the voltage
voltage = (rawValue / adcPrecision) * maxBatteryVoltage ;
// check if voltage is within specified voltage range
voltage = voltage<minBatteryVoltage||voltage>maxBatteryVoltage?-1.0f:voltage;
// translate battery voltage into percentage
/*
the standard "map" function doesn't work
https://www.arduino.cc/reference/en/language/functions/math/map/ notes and warnings at the bottom
*/
batteryLevel = mapf(voltage, minBatteryVoltage, maxBatteryVoltage, 0, 100);
// SmartHome stuff
if (WLED_MQTT_CONNECTED) {
char subuf[64];
strcpy(subuf, mqttDeviceTopic);
strcat_P(subuf, PSTR("/voltage"));
mqtt->publish(subuf, 0, false, String(voltage).c_str());
}
}
@ -163,9 +193,31 @@ class UsermodBatteryBasic : public Usermod
JsonObject user = root["u"];
if (user.isNull()) user = root.createNestedObject("u");
JsonArray battery = user.createNestedArray("Battery level");
battery.add(batteryLevel);
battery.add(F(" %"));
// info modal display names
JsonArray batteryPercentage = user.createNestedArray("Battery level");
JsonArray batteryVoltage = user.createNestedArray("Battery voltage");
if (initializing) {
batteryPercentage.add((nextReadTime - millis()) / 1000);
batteryPercentage.add(" sec");
batteryVoltage.add((nextReadTime - millis()) / 1000);
batteryVoltage.add(" sec");
return;
}
if(batteryLevel < 0) {
batteryPercentage.add(F("invalid"));
} else {
batteryPercentage.add(batteryLevel);
}
batteryPercentage.add(F(" %"));
if(voltage < 0) {
batteryVoltage.add(F("invalid"));
} else {
batteryVoltage.add(truncate(voltage, 2));
}
batteryVoltage.add(F(" V"));
}

45
usermods/usermod_v2_four_line_display_ALT/readme.md Normal file
View File

@ -0,0 +1,45 @@
# I2C 4 Line Display Usermod ALT
Thank you to the authors of the original version of these usermods. It would not have been possible without them!
"usermod_v2_four_line_display"
"usermod_v2_rotary_encoder_ui"
The core of these usermods are a copy of the originals. The main changes are done to the FourLineDisplay usermod.
The display usermod UI has been completely changed.
The changes made to the RotaryEncoder usermod were made to support the new UI in the display usermod.
Without the display it functions identical to the original.
The original "usermod_v2_auto_save" will not work with the display just yet.
Press the encoder to cycle through the options:
*Brightness
*Speed
*Intensity
*Palette
*Effect
*Main Color (only if display is used)
*Saturation (only if display is used)
Press and hold the encoder to display Network Info
if AP is active then it will display AP ssid and Password
Also shows if the timer is enabled
[See the pair of usermods in action](https://www.youtube.com/watch?v=ulZnBt9z3TI)
## Installation
Please refer to the original `usermod_v2_rotary_encoder_ui` readme for the main instructions
Then to activate this alternative usermod add `#define USE_ALT_DISPlAY` to the `usermods_list.cpp` file,
or add `-D USE_ALT_DISPlAY` to the original `platformio_override.ini.sample` file
### PlatformIO requirements
Note: the Four Line Display usermod requires the libraries `U8g2` and `Wire`.
## Change Log
2021-10
* First public release

970
usermods/usermod_v2_four_line_display_ALT/usermod_v2_four_line_display_ALT.h Normal file
View File

@ -0,0 +1,970 @@
#pragma once
#include "wled.h"
#include <U8x8lib.h> // from https://github.com/olikraus/u8g2/
//
// Insired by the usermod_v2_four_line_display
//
// v2 usermod for using 128x32 or 128x64 i2c
// OLED displays to provide a four line display
// for WLED.
//
// Dependencies
// * This usermod REQURES the ModeSortUsermod
// * This Usermod works best, by far, when coupled
// with RotaryEncoderUIUsermod.
//
// Make sure to enable NTP and set your time zone in WLED Config | Time.
//
// REQUIREMENT: You must add the following requirements to
// REQUIREMENT: "lib_deps" within platformio.ini / platformio_override.ini
// REQUIREMENT: * U8g2 (the version already in platformio.ini is fine)
// REQUIREMENT: * Wire
//
//The SCL and SDA pins are defined here.
#ifdef ARDUINO_ARCH_ESP32
#ifndef FLD_PIN_SCL
#define FLD_PIN_SCL 22
#endif
#ifndef FLD_PIN_SDA
#define FLD_PIN_SDA 21
#endif
#ifndef FLD_PIN_CLOCKSPI
#define FLD_PIN_CLOCKSPI 18
#endif
#ifndef FLD_PIN_DATASPI
#define FLD_PIN_DATASPI 23
#endif
#ifndef FLD_PIN_DC
#define FLD_PIN_DC 19
#endif
#ifndef FLD_PIN_CS
#define FLD_PIN_CS 5
#endif
#ifndef FLD_PIN_RESET
#define FLD_PIN_RESET 26
#endif
#else
#ifndef FLD_PIN_SCL
#define FLD_PIN_SCL 5
#endif
#ifndef FLD_PIN_SDA
#define FLD_PIN_SDA 4
#endif
#ifndef FLD_PIN_CLOCKSPI
#define FLD_PIN_CLOCKSPI 14
#endif
#ifndef FLD_PIN_DATASPI
#define FLD_PIN_DATASPI 13
#endif
#ifndef FLD_PIN_DC
#define FLD_PIN_DC 12
#endif
#ifndef FLD_PIN_CS
#define FLD_PIN_CS 15
#endif
#ifndef FLD_PIN_RESET
#define FLD_PIN_RESET 16
#endif
#endif
// When to time out to the clock or blank the screen
// if SLEEP_MODE_ENABLED.
#define SCREEN_TIMEOUT_MS 60*1000 // 1 min
#define TIME_INDENT 0
#define DATE_INDENT 2
// Minimum time between redrawing screen in ms
#define USER_LOOP_REFRESH_RATE_MS 100
// Extra char (+1) for null
#define LINE_BUFFER_SIZE 16+1
#define MAX_JSON_CHARS 19+1
#define MAX_MODE_LINE_SPACE 13+1
typedef enum {
NONE = 0,
SSD1306, // U8X8_SSD1306_128X32_UNIVISION_HW_I2C
SH1106, // U8X8_SH1106_128X64_WINSTAR_HW_I2C
SSD1306_64, // U8X8_SSD1306_128X64_NONAME_HW_I2C
SSD1305, // U8X8_SSD1305_128X32_ADAFRUIT_HW_I2C
SSD1305_64, // U8X8_SSD1305_128X64_ADAFRUIT_HW_I2C
SSD1306_SPI, // U8X8_SSD1306_128X32_NONAME_HW_SPI
SSD1306_SPI64 // U8X8_SSD1306_128X64_NONAME_HW_SPI
} DisplayType;
/*
Fontname: benji_custom_icons_1x
Copyright:
Glyphs: 1/1
BBX Build Mode: 3
* 4 = custom palette
*/
const uint8_t u8x8_font_benji_custom_icons_1x1[13] U8X8_FONT_SECTION("u8x8_font_benji_custom_icons_1x1") =
"\4\4\1\1<n\372\377\275\277\26\34";
/*
Fontname: benji_custom_icons_2x
Copyright:
Glyphs: 8/8
BBX Build Mode: 3
// all the icons uses are consolidated into a single library to simplify code
// these are just the required icons stripped from the U8x8 libraries in addition to a few new custom icons
* 1 = sun
* 2 = skip forward
* 3 = fire
* 4 = custom palette
* 5 = puzzle piece
* 6 = moon
* 7 = brush
* 8 = custom saturation
*/
const uint8_t u8x8_font_benji_custom_icons_2x2[261] U8X8_FONT_SECTION("u8x8_font_benji_custom_icons_2x2") =
"\1\10\2\2\200\200\14\14\300\340\360\363\363\360\340\300\14\14\200\200\1\1\60\60\3\7\17\317\317\17\7\3"
"\60\60\1\1\374\370\360\340\340\300\200\0\374\370\360\340\340\300\200\0\77\37\17\7\7\3\1\0\77\37\17\7"
"\7\3\1\0\0\200\340\360\377\376\374\360\0\0\300\200\0\0\0\0\17\77\177\377\17\7\301\340\370\374\377\377"
"\377|\0\0\360\370\234\236\376\363\363\377\377\363\363\376><\370\360\3\17\77yy\377\377\377\377\317\17\17"
"\17\17\7\3\360\360\360\360\366\377\377\366\360\360\360\360\0\0\0\0\377\377\377\377\237\17\17\237\377\377\377\377"
"\6\17\17\6\340\370\374\376\377\340\200\0\0\0\0\0\0\0\0\0\3\17\37\77\177\177\177\377\376|||"
"\70\30\14\0\0\0\0\0\0\0\0``\360\370|<\36\7\2\0\300\360\376\377\177\77\36\0\1\1\0"
"\0\0\0\0\200\200\14\14\300\340\360\363\363\360\340\300\14\14\200\200\1\1\60\60\3\4\10\310\310\10\4\3"
"\60\60\1\1";
/*
Fontname: benji_custom_icons_6x
Copyright:
Glyphs: 8/8
BBX Build Mode: 3
// 6x6 icons libraries take up a lot of memory thus all the icons uses are consolidated into a single library
// these are just the required icons stripped from the U8x8 libraries in addition to a few new custom icons
* 1 = sun
* 2 = skip forward
* 3 = fire
* 4 = custom palette
* 5 = puzzle piece
* 6 = moon
* 7 = brush
* 8 = custom saturation
*/
const uint8_t u8x8_font_benji_custom_icons_6x6[2308] U8X8_FONT_SECTION("u8x8_font_benji_custom_icons_6x6") =
"\1\10\6\6\0\0\0\0\0\0\200\300\300\300\300\200\0\0\0\0\0\0\0\0\0\36\77\77\77\77\36\0"
"\0\0\0\0\0\0\0\0\200\300\300\300\300\200\0\0\0\0\0\0\0\0\0\0\0\0\7\17\17\17\17\7"
"\0\0\0\0\200\300\340\340\340\360\360\360\360\360\360\340\340\340\300\200\0\0\0\0\7\17\17\17\17\7\0\0"
"\0\0\0\0\300\340\340\340\340\300\0\0\0\0\0\0\340\374\376\377\377\377\377\377\377\377\377\377\377\377\377\377"
"\377\377\377\377\377\376\374\340\0\0\0\0\0\0\300\340\340\340\340\300\3\7\7\7\7\3\0\0\0\0\0\0"
"\7\77\177\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\177\77\7\0\0\0\0\0\0\3\7"
"\7\7\7\3\0\0\0\0\0\0\340\360\360\360\360\340\0\0\0\0\1\3\7\7\7\17\17\17\17\17\17\7"
"\7\7\3\1\0\0\0\0\340\360\360\360\360\340\0\0\0\0\0\0\0\0\0\0\0\0\1\3\3\3\3\1"
"\0\0\0\0\0\0\0\0\0x\374\374\374\374x\0\0\0\0\0\0\0\0\0\1\3\3\3\3\1\0\0"
"\0\0\0\0\300\200\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\300\200\0\0"
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\377\377\377\376\376\374\370\360\360\340\300\200"
"\200\0\0\0\0\0\0\0\0\0\0\0\377\377\377\376\376\374\370\360\360\340\300\200\200\0\0\0\0\0\0\0"
"\0\0\0\0\377\377\377\377\377\377\377\377\377\377\377\377\377\377\376\374\374\370\360\340\340\300\200\0\377\377\377\377"
"\377\377\377\377\377\377\377\377\377\377\376\374\374\370\360\340\340\300\200\0\377\377\377\377\377\377\377\377\377\377\377\377"
"\377\377\177\77\77\37\17\7\7\3\1\0\377\377\377\377\377\377\377\377\377\377\377\377\377\377\177\77\77\37\17\7"
"\7\3\1\0\377\377\377\177\177\77\37\17\17\7\3\1\1\0\0\0\0\0\0\0\0\0\0\0\377\377\377\177"
"\177\77\37\17\17\7\3\1\1\0\0\0\0\0\0\0\0\0\0\0\3\1\0\0\0\0\0\0\0\0\0\0"
"\0\0\0\0\0\0\0\0\0\0\0\0\3\1\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\1\376\374\374\370\360\340\300\200\0\0\0\0\0\0\0"
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\200\340\360\374"
"\377\377\377\377\377\377\377\377\377\376\370\300\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"
"\0\0\0\0\0\0\300\340\360\374\376\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\37\0\0\0\0"
"\0\0\4\370\360\360\340\300\200\0\0\0\0\0\0\0\0\0\0\0\370\377\377\377\377\377\377\377\377\377\377\377"
"\377\377\377\377\377\177\77\37\7\3\0\0\0\0\0\200\300\360\374\377\377\377\377\377\377\377\376\370\340\0\0\0"
"\0\0\0\0\3\37\177\377\377\377\377\377\377\377\377\377\77\17\7\1\0\0\0\0\0\200\300\360\370\374\376\377"
"\377\377\377\377\377\377\377\377\377\377\377\377\377\377\0\0\0\0\0\0\0\0\0\1\3\7\17\37\77\77\177\200"
"\0\0\0\0\0\0\340\374\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\177\77\17\1\0\0"
"\0\0\0\0\0\0\0\0\0\0\0\200\300\340\340\360\360\370|<>>>~\377\377\377\377\377\377\377\177"
"\77\36\36\36\36<|\370\370\360\360\340\340\200\0\0\0\0\0\0\0\0\300\360\374\376\377\377\377\377\377\377"
"\377\360\340\300\300\300\300\340\360\377\377\377\377\377\377\370\360\340\340\340\340\360\370\377\377\377\377\377\377\377\377\377"
"\374\360\340\200\360\377\377\377\377\377\207\3\1\1\1\1\3\207\377\377\377\377\377\377\377\377\377\377\377\377\377\377"
"\377\377\377\377\377\377\377\207\3\1\1\1\1\3\207\377\377\377\377\377\17\377\377\377\377\377\377\377\376~>>"
"\77\77\177\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\376\376\376\376\377\377\377"
"\177\77\37\7\0\0\3\17\77\177\377\377\360\340\300\300\300\300\340\360\377\377\377\377\377\377\377\377\377\377\77\17"
"\17\7\7\7\7\7\7\7\7\7\3\3\3\3\1\0\0\0\0\0\0\0\0\0\0\0\0\1\3\7\17\37"
"\37\77\77\177\177\177\377\377\377\377\377\377\377\377\377~\30\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\370\374\376\377\377\377\377\377\377\376\374\360\0\0\0\0"
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\360\360\360\360\360\360\360\360\360\360\360\360"
"\360\363\377\377\377\377\377\377\377\377\363\360\360\360\360\360\360\360\360\360\360\360\360\360\0\0\0\0\0\0\0\0"
"\0\0\0\0\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377"
"\377\377\377\377\377\377\377\377\0\0\0\0\0\0\0\0\0\0\0\0\377\377\377\377\377\377\377\377\377\377\377\377"
"\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\374\374\376\376\377\377\377\377"
"\377\376\374\360\377\377\377\377\377\377\377\377\377\377\377\377\177\77\37\17\17\17\17\17\17\37\77\177\377\377\377\377"
"\377\377\377\377\377\377\377\377\3\3\7\7\17\17\17\17\7\7\3\0\377\377\377\377\377\377\377\377\377\377\377\377"
"\360\300\0\0\0\0\0\0\0\0\300\360\377\377\377\377\377\377\377\377\377\377\377\377\0\0\0\0\0\0\0\0"
"\0\0\0\0\0\0\0\0\0\200\300\340\360\360\370\374\374\376\376\7\0\0\0\0\0\0\0\0\0\0\0\0"
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\300\360\374\376\377\377\377\377\377\377\377"
"\377\377\377\340\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"
"\0\0\0\0\374\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\374\360\300\200\0\0\0\0\0\0\0"
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\17\177\377\377\377\377\377\377\377\377\377\377"
"\377\377\377\377\377\377\377\377\377\377\376\374\370\360\360\340\340\300\300\300\200\200\200\200\0\0\0\0\0\0\200\200"
"\200\200\0\0\0\0\1\7\37\77\177\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377"
"\377\377\377\377\377\377\377\377\377\377\377\377\377\177\77\37\7\1\0\0\0\0\0\0\0\0\0\0\1\3\3\7"
"\17\17\37\37\37\77\77\77\77\177\177\177\177\177\177\77\77\77\77\37\37\37\17\17\7\3\3\1\0\0\0\0"
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"
"\0\0\0\0\0\0\200\200\300\340\360\360\370\374\374\376\377~\34\10\0\0\0\0\0\0\0\0\0\0\0\0"
"\0\0\0\0\0\0\0\0\0\0\0\200\300\300\340\360\360\370\374\376\376\377\377\377\377\377\377\177\77\17\7\3"
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\4\6\17\17\37\77\177\377"
"\377\377\377\377\377\377\77\37\7\3\1\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\300\370\374\376"
"\376\377\377\377\377\377\377\376\376\374\370\340\0\0\0\0\3\17\7\3\1\0\0\0\0\0\0\0\0\0\0\0"
"\0\0\0\0\0\0\0\0\0\0\200\360\377\377\377\377\377\377\377\377\377\377\377\377\377\377\177\17\0\0\0\0"
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0`px\374\376\377\377\377\377\377\377"
"\177\177\177\77\77\37\17\7\3\1\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"
"\0\0\0\0\0\0\0\0\0\0\0\200\300\300\200\0\0\0\0\0\0\0\0\0\14\36\77\77\36\14\0\0"
"\0\0\0\0\0\0\0\200\300\300\200\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\3\7\17\17\7\3"
"\0\200\300\340\360\360\370\370\370\374\374\374\374\370\370\370\360\360\340\300\200\0\3\7\17\17\7\3\0\0\0\0"
"\0\0\0\0\300\340\360\360\340\300\0\0\0\0\340\374\377\177\177\177\177\177\177\177\177\177\177\177\177\177\177\177"
"\177\177\177\177\177\377\374\340\0\0\0\0\300\340\360\360\340\300\0\0\0\1\3\3\1\0\0\0\0\0\1\17"
"\77\177\370\340\300\200\200\0\0\0\0\0\0\0\0\200\200\300\340\370\177\77\17\1\0\0\0\0\0\1\3\3"
"\1\0\0\0\0\0\0\0\0\0\60x\374\374x\60\0\0\0\1\3\3\7\7\7\16\16\16\16\7\7\7"
"\3\3\1\0\0\0\60x\374\374x\60\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"
"\0\0\0\0\0\0\0\0\14\36\77\77\36\14\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"
"\0\0\0";
class FourLineDisplayUsermod : public Usermod {
private:
bool initDone = false;
unsigned long lastTime = 0;
// HW interface & configuration
U8X8 *u8x8 = nullptr; // pointer to U8X8 display object
#ifndef FLD_SPI_DEFAULT
int8_t ioPin[5] = {FLD_PIN_SCL, FLD_PIN_SDA, -1, -1, -1}; // I2C pins: SCL, SDA
uint32_t ioFrequency = 400000; // in Hz (minimum is 100000, baseline is 400000 and maximum should be 3400000)
DisplayType type = SSD1306_64; // display type
#else
int8_t ioPin[5] = {FLD_PIN_CLOCKSPI, FLD_PIN_DATASPI, FLD_PIN_CS, FLD_PIN_DC, FLD_PIN_RESET}; // SPI pins: CLK, MOSI, CS, DC, RST
DisplayType type = SSD1306_SPI; // display type
#endif
bool flip = false; // flip display 180°
uint8_t contrast = 10; // screen contrast
uint8_t lineHeight = 1; // 1 row or 2 rows
uint32_t refreshRate = USER_LOOP_REFRESH_RATE_MS; // in ms
uint32_t screenTimeout = SCREEN_TIMEOUT_MS; // in ms
bool sleepMode = true; // allow screen sleep?
bool clockMode = false; // display clock
// needRedraw marks if redraw is required to prevent often redrawing.
bool needRedraw = true;
// Next variables hold the previous known values to determine if redraw is
// required.
String knownSsid = "";
IPAddress knownIp;
uint8_t knownBrightness = 0;
uint8_t knownEffectSpeed = 0;
uint8_t knownEffectIntensity = 0;
uint8_t knownMode = 0;
uint8_t knownPalette = 0;
uint8_t knownMinute = 99;
byte brightness100;
byte fxspeed100;
byte fxintensity100;
bool knownnightlight = nightlightActive;
bool wificonnected = interfacesInited;
bool powerON = true;
bool displayTurnedOff = false;
unsigned long lastUpdate = 0;
unsigned long lastRedraw = 0;
unsigned long overlayUntil = 0;
// Set to 2 or 3 to mark lines 2 or 3. Other values ignored.
byte markLineNum = 0;
byte markColNum = 0;
// strings to reduce flash memory usage (used more than twice)
static const char _name[];
static const char _contrast[];
static const char _refreshRate[];
static const char _screenTimeOut[];
static const char _flip[];
static const char _sleepMode[];
static const char _clockMode[];
static const char _busClkFrequency[];
// If display does not work or looks corrupted check the
// constructor reference:
// https://github.com/olikraus/u8g2/wiki/u8x8setupcpp
// or check the gallery:
// https://github.com/olikraus/u8g2/wiki/gallery
public:
// gets called once at boot. Do all initialization that doesn't depend on
// network here
void setup() {
if (type == NONE) return;
if (type == SSD1306_SPI || type == SSD1306_SPI64) {
PinManagerPinType pins[5] = { { ioPin[0], true }, { ioPin[1], true}, { ioPin[2], true }, { ioPin[3], true}, { ioPin[4], true }};
if (!pinManager.allocateMultiplePins(pins, 5, PinOwner::UM_FourLineDisplay)) { type=NONE; return; }
} else {
PinManagerPinType pins[2] = { { ioPin[0], true }, { ioPin[1], true} };
if (!pinManager.allocateMultiplePins(pins, 2, PinOwner::UM_FourLineDisplay)) { type=NONE; return; }
}
DEBUG_PRINTLN(F("Allocating display."));
switch (type) {
case SSD1306:
#ifdef ESP8266
if (!(ioPin[0]==5 && ioPin[1]==4))
u8x8 = (U8X8 *) new U8X8_SSD1306_128X32_UNIVISION_SW_I2C(ioPin[0], ioPin[1]); // SCL, SDA, reset
else
#endif
u8x8 = (U8X8 *) new U8X8_SSD1306_128X32_UNIVISION_HW_I2C(U8X8_PIN_NONE, ioPin[0], ioPin[1]); // Pins are Reset, SCL, SDA
lineHeight = 1;
break;
case SH1106:
#ifdef ESP8266
if (!(ioPin[0]==5 && ioPin[1]==4))
u8x8 = (U8X8 *) new U8X8_SH1106_128X64_WINSTAR_SW_I2C(ioPin[0], ioPin[1]); // SCL, SDA, reset
else
#endif
u8x8 = (U8X8 *) new U8X8_SH1106_128X64_WINSTAR_HW_I2C(U8X8_PIN_NONE, ioPin[0], ioPin[1]); // Pins are Reset, SCL, SDA
lineHeight = 2;
break;
case SSD1306_64:
#ifdef ESP8266
if (!(ioPin[0]==5 && ioPin[1]==4))
u8x8 = (U8X8 *) new U8X8_SSD1306_128X64_NONAME_SW_I2C(ioPin[0], ioPin[1]); // SCL, SDA, reset
else
#endif
u8x8 = (U8X8 *) new U8X8_SSD1306_128X64_NONAME_HW_I2C(U8X8_PIN_NONE, ioPin[0], ioPin[1]); // Pins are Reset, SCL, SDA
lineHeight = 2;
break;
case SSD1305:
#ifdef ESP8266
if (!(ioPin[0]==5 && ioPin[1]==4))
u8x8 = (U8X8 *) new U8X8_SSD1305_128X32_NONAME_SW_I2C(ioPin[0], ioPin[1]); // SCL, SDA, reset
else
#endif
u8x8 = (U8X8 *) new U8X8_SSD1305_128X32_ADAFRUIT_HW_I2C(U8X8_PIN_NONE, ioPin[0], ioPin[1]); // Pins are Reset, SCL, SDA
lineHeight = 1;
break;
case SSD1305_64:
#ifdef ESP8266
if (!(ioPin[0]==5 && ioPin[1]==4))
u8x8 = (U8X8 *) new U8X8_SSD1305_128X64_ADAFRUIT_SW_I2C(ioPin[0], ioPin[1]); // SCL, SDA, reset
else
#endif
u8x8 = (U8X8 *) new U8X8_SSD1305_128X64_ADAFRUIT_HW_I2C(U8X8_PIN_NONE, ioPin[0], ioPin[1]); // Pins are Reset, SCL, SDA
lineHeight = 2;
break;
case SSD1306_SPI:
if (!(ioPin[0]==FLD_PIN_CLOCKSPI && ioPin[1]==FLD_PIN_DATASPI)) // if not overridden these sould be HW accellerated
u8x8 = (U8X8 *) new U8X8_SSD1306_128X32_UNIVISION_4W_SW_SPI(ioPin[0], ioPin[1], ioPin[2], ioPin[3], ioPin[4]);
else
u8x8 = (U8X8 *) new U8X8_SSD1306_128X32_UNIVISION_4W_HW_SPI(ioPin[2], ioPin[3], ioPin[4]); // Pins are cs, dc, reset
lineHeight = 1;
break;
case SSD1306_SPI64:
if (!(ioPin[0]==FLD_PIN_CLOCKSPI && ioPin[1]==FLD_PIN_DATASPI)) // if not overridden these sould be HW accellerated
u8x8 = (U8X8 *) new U8X8_SSD1306_128X64_NONAME_4W_SW_SPI(ioPin[0], ioPin[1], ioPin[2], ioPin[3], ioPin[4]);
else
u8x8 = (U8X8 *) new U8X8_SSD1306_128X64_NONAME_4W_HW_SPI(ioPin[2], ioPin[3], ioPin[4]); // Pins are cs, dc, reset
lineHeight = 2;
break;
default:
u8x8 = nullptr;
}
if (nullptr == u8x8) {
DEBUG_PRINTLN(F("Display init failed."));
for (byte i=0; i<5 && ioPin[i]>=0; i++) pinManager.deallocatePin(ioPin[i], PinOwner::UM_FourLineDisplay);
type = NONE;
return;
}
initDone = true;
DEBUG_PRINTLN(F("Starting display."));
if (!(type == SSD1306_SPI || type == SSD1306_SPI64)) u8x8->setBusClock(ioFrequency); // can be used for SPI too
u8x8->begin();
setFlipMode(flip);
setContrast(contrast); //Contrast setup will help to preserve OLED lifetime. In case OLED need to be brighter increase number up to 255
setPowerSave(0);
drawString(0, 0, "Loading...");
}
// gets called every time WiFi is (re-)connected. Initialize own network
// interfaces here
void connected() {}
/**
* Da loop.
*/
void loop() {
if (displayTurnedOff && millis() - lastUpdate < 1000) {
return;
}else if (millis() - lastUpdate < refreshRate){
return;}
redraw(false);
lastUpdate = millis();
}
/**
* Wrappers for screen drawing
*/
void setFlipMode(uint8_t mode) {
if (type==NONE) return;
u8x8->setFlipMode(mode);
}
void setContrast(uint8_t contrast) {
if (type==NONE) return;
u8x8->setContrast(contrast);
}
void drawString(uint8_t col, uint8_t row, const char *string, bool ignoreLH=false) {
if (type==NONE) return;
u8x8->setFont(u8x8_font_chroma48medium8_r);
if (!ignoreLH && lineHeight==2) u8x8->draw1x2String(col, row, string);
else u8x8->drawString(col, row, string);
}
void draw2x2String(uint8_t col, uint8_t row, const char *string) {
if (type==NONE) return;
u8x8->setFont(u8x8_font_chroma48medium8_r);
u8x8->draw2x2String(col, row, string);
}
void drawGlyph(uint8_t col, uint8_t row, char glyph, const uint8_t *font, bool ignoreLH=false) {
if (type==NONE) return;
u8x8->setFont(font);
if (!ignoreLH && lineHeight==2) u8x8->draw1x2Glyph(col, row, glyph);
else u8x8->drawGlyph(col, row, glyph);
}
uint8_t getCols() {
if (type==NONE) return 0;
return u8x8->getCols();
}
void clear() {
if (type==NONE) return;
u8x8->clear();
}
void setPowerSave(uint8_t save) {
if (type==NONE) return;
u8x8->setPowerSave(save);
}
void center(String &line, uint8_t width) {
int len = line.length();
if (len<width) for (byte i=(width-len)/2; i>0; i--) line = ' ' + line;
for (byte i=line.length(); i<width; i++) line += ' ';
}
//function to update lastredraw
void updateRedrawTime(){
lastRedraw = millis();
}
/**
* Redraw the screen (but only if things have changed
* or if forceRedraw).
*/
void redraw(bool forceRedraw) {
if (type==NONE) return;
if (overlayUntil > 0) {
if (millis() >= overlayUntil) {
// Time to display the overlay has elapsed.
overlayUntil = 0;
forceRedraw = true;
} else {
// We are still displaying the overlay
// Don't redraw.
return;
}
}
// Check if values which are shown on display changed from the last time.
if (forceRedraw) {
needRedraw = true;
} else if ((bri == 0 && powerON) || (bri > 0 && !powerON)) { //trigger power icon
powerON = !powerON;
drawStatusIcons();
lastRedraw = millis();
} else if (knownnightlight != nightlightActive) { //trigger moon icon
knownnightlight = nightlightActive;
drawStatusIcons();
if (knownnightlight) overlay(" Timer On", 1000, 6);
lastRedraw = millis();
}else if (wificonnected != interfacesInited){ //trigger wifi icon
wificonnected = interfacesInited;
drawStatusIcons();
lastRedraw = millis();
} else if (knownMode != effectCurrent) {
knownMode = effectCurrent;
if(displayTurnedOff)needRedraw = true;
else showCurrentEffectOrPalette(knownMode, JSON_mode_names, 3);
} else if (knownPalette != effectPalette) {
knownPalette = effectPalette;
if(displayTurnedOff)needRedraw = true;
else showCurrentEffectOrPalette(knownPalette, JSON_palette_names, 2);
} else if (knownBrightness != bri) {
if(displayTurnedOff && nightlightActive){needRedraw = false; knownBrightness = bri;}
else if(displayTurnedOff)needRedraw = true;
else updateBrightness();
} else if (knownEffectSpeed != effectSpeed) {
if(displayTurnedOff)needRedraw = true;
else updateSpeed();
} else if (knownEffectIntensity != effectIntensity) {
if(displayTurnedOff)needRedraw = true;
else updateIntensity();
}
if (!needRedraw) {
// Nothing to change.
// Turn off display after 1 minutes with no change.
if(sleepMode && !displayTurnedOff && (millis() - lastRedraw > screenTimeout)) {
// We will still check if there is a change in redraw()
// and turn it back on if it changed.
sleepOrClock(true);
} else if (displayTurnedOff && clockMode) {
showTime();
}
return;
} else {
clear();
}
needRedraw = false;
lastRedraw = millis();
if (displayTurnedOff) {
// Turn the display back on
sleepOrClock(false);
}
// Update last known values.
knownSsid = apActive ? apSSID : WiFi.SSID(); //apActive ? WiFi.softAPSSID() :
knownIp = apActive ? IPAddress(4, 3, 2, 1) : WiFi.localIP();
knownBrightness = bri;
knownMode = effectCurrent;
knownPalette = effectPalette;
knownEffectSpeed = effectSpeed;
knownEffectIntensity = effectIntensity;
knownnightlight = nightlightActive;
wificonnected = interfacesInited;
// Do the actual drawing
// First row: Icons
draw2x2GlyphIcons();
drawArrow();
drawStatusIcons();
// Second row
updateBrightness();
updateSpeed();
updateIntensity();
// Third row
showCurrentEffectOrPalette(knownPalette, JSON_palette_names, 2); //Palette info
// Fourth row
showCurrentEffectOrPalette(knownMode, JSON_mode_names, 3); //Effect Mode info
}
void updateBrightness(){
knownBrightness = bri;
if(overlayUntil == 0){
brightness100 = (((float)(bri)/255)*100);
char lineBuffer[4];
sprintf_P(lineBuffer, PSTR("%-3d"), brightness100);
drawString(1, lineHeight, lineBuffer);
lastRedraw = millis();}
}
void updateSpeed(){
knownEffectSpeed = effectSpeed;
if(overlayUntil == 0){
fxspeed100 = (((float)(effectSpeed)/255)*100);
char lineBuffer[4];
sprintf_P(lineBuffer, PSTR("%-3d"), fxspeed100);
drawString(5, lineHeight, lineBuffer);
lastRedraw = millis();}
}
void updateIntensity(){
knownEffectIntensity = effectIntensity;
if(overlayUntil == 0){
fxintensity100 = (((float)(effectIntensity)/255)*100);
char lineBuffer[4];
sprintf_P(lineBuffer, PSTR("%-3d"), fxintensity100);
drawString(9, lineHeight, lineBuffer);
lastRedraw = millis();}
}
void draw2x2GlyphIcons(){
if(lineHeight == 2){
drawGlyph(1, 0, 1, u8x8_font_benji_custom_icons_2x2, true);//brightness icon
drawGlyph(5, 0, 2, u8x8_font_benji_custom_icons_2x2, true);//speed icon
drawGlyph(9, 0, 3, u8x8_font_benji_custom_icons_2x2, true);//intensity icon
drawGlyph(14, 2*lineHeight, 4, u8x8_font_benji_custom_icons_2x2, true);//palette icon
drawGlyph(14, 3*lineHeight, 5, u8x8_font_benji_custom_icons_2x2, true);//effect icon
}
else{
drawGlyph(2, 0, 69, u8x8_font_open_iconic_weather_1x1);//brightness icon
drawGlyph(6, 0, 72, u8x8_font_open_iconic_play_1x1);//speed icon
drawGlyph(10, 0, 78, u8x8_font_open_iconic_thing_1x1);//intensity icon
drawGlyph(15, 2*lineHeight, 4, u8x8_font_benji_custom_icons_1x1);//palette icon
drawGlyph(15, 3*lineHeight, 70, u8x8_font_open_iconic_thing_1x1);//effect icon
}
}
void drawStatusIcons(){
drawGlyph(14, 0, 80 + (wificonnected?0:1), u8x8_font_open_iconic_embedded_1x1, true); // wifi icon
drawGlyph(15, 0, 78 + (bri > 0 ? 0 : 3), u8x8_font_open_iconic_embedded_1x1, true); // power icon
drawGlyph(13, 0, 66 + (nightlightActive?0:4), u8x8_font_open_iconic_weather_1x1, true); // moon icon for nighlight mode
}
/**
* marks the position of the arrow showing
* the current setting being changed
* pass line and colum info
*/
void setMarkLine(byte newMarkLineNum, byte newMarkColNum) {
markLineNum = newMarkLineNum;
markColNum = newMarkColNum;
}
//Draw the arrow for the current setting beiong changed
void drawArrow(){
if(markColNum != 255 && markLineNum !=255)drawGlyph(markColNum, markLineNum*lineHeight, 69, u8x8_font_open_iconic_play_1x1);
}
//Display the current effect or palette (desiredEntry)
// on the appropriate line (row).
void showCurrentEffectOrPalette(int inputEffPal, const char *qstring, uint8_t row) {
knownMode = effectCurrent;
knownPalette = effectPalette;
if(overlayUntil == 0){
char lineBuffer[MAX_JSON_CHARS];
char smallBuffer1[MAX_MODE_LINE_SPACE];
char smallBuffer2[MAX_MODE_LINE_SPACE];
char smallBuffer3[MAX_MODE_LINE_SPACE+1];
uint8_t qComma = 0;
bool insideQuotes = false;
bool spaceHit = false;
uint8_t printedChars = 0;
uint8_t smallChars1 = 0;
uint8_t smallChars2 = 0;
uint8_t smallChars3 = 0;
uint8_t totalCount = 0;
char singleJsonSymbol;
// Find the mode name in JSON
for (size_t i = 0; i < strlen_P(qstring); i++) { //find and get the full text for printing
singleJsonSymbol = pgm_read_byte_near(qstring + i);
if (singleJsonSymbol == '\0') break;
switch (singleJsonSymbol) {
case '"':
insideQuotes = !insideQuotes;
break;
case '[':
case ']':
break;
case ',':
qComma++;
default:
if (!insideQuotes || (qComma != inputEffPal)) break;
lineBuffer[printedChars++] = singleJsonSymbol;
totalCount++;
}
if ((qComma > inputEffPal)) break;
}
if(lineHeight ==2){ // use this code for 8 line display
if(printedChars < (MAX_MODE_LINE_SPACE)){ // use big font if the text fits
for (;printedChars < (MAX_MODE_LINE_SPACE-1); printedChars++) {lineBuffer[printedChars]=' '; }
lineBuffer[printedChars] = 0;
drawString(1, row*lineHeight, lineBuffer);
lastRedraw = millis();
}else{ // for long names divide the text into 2 lines and print them small
for (uint8_t i = 0; i < printedChars; i++){
switch (lineBuffer[i]){
case ' ':
if(i > 4 && !spaceHit) {
spaceHit = true;
break;}
if(!spaceHit) smallBuffer1[smallChars1++] = lineBuffer[i];
if (spaceHit) smallBuffer2[smallChars2++] = lineBuffer[i];
break;
default:
if(!spaceHit) smallBuffer1[smallChars1++] = lineBuffer[i];
if (spaceHit) smallBuffer2[smallChars2++] = lineBuffer[i];
break;
}
}
for (; smallChars1 < (MAX_MODE_LINE_SPACE-1); smallChars1++) smallBuffer1[smallChars1]=' ';
smallBuffer1[smallChars1] = 0;
drawString(1, row*lineHeight, smallBuffer1, true);
for (; smallChars2 < (MAX_MODE_LINE_SPACE-1); smallChars2++) smallBuffer2[smallChars2]=' ';
smallBuffer2[smallChars2] = 0;
drawString(1, row*lineHeight+1, smallBuffer2, true);
lastRedraw = millis();
}
}
else{ // use this code for 4 ling displays
if (printedChars > MAX_MODE_LINE_SPACE) printedChars = MAX_MODE_LINE_SPACE;
for (uint8_t i = 0; i < printedChars; i++){
smallBuffer3[smallChars3++] = lineBuffer[i];
}
for (; smallChars3 < (MAX_MODE_LINE_SPACE); smallChars3++) smallBuffer3[smallChars3]=' ';
smallBuffer3[smallChars3] = 0;
drawString(1, row*lineHeight, smallBuffer3, true);
lastRedraw = millis();
}
}
}
/**
* If there screen is off or in clock is displayed,
* this will return true. This allows us to throw away
* the first input from the rotary encoder but
* to wake up the screen.
*/
bool wakeDisplay() {
//knownHour = 99;
if (displayTurnedOff) {
// Turn the display back on
sleepOrClock(false);
redraw(true);
return true;
}
return false;
}
/**
* Allows you to show one line and a glyph as overlay for a
* period of time.
* Clears the screen and prints.
*/
void overlay(const char* line1, long showHowLong, byte glyphType) {
if (displayTurnedOff) {
// Turn the display back on
sleepOrClock(false);
}
// Print the overlay
clear();
if (glyphType > 0){
if ( lineHeight == 2) drawGlyph(5, 0, glyphType, u8x8_font_benji_custom_icons_6x6, true);
else drawGlyph(7, lineHeight, glyphType, u8x8_font_benji_custom_icons_2x2, true);
}
if (line1) drawString(0, 3*lineHeight, line1);
overlayUntil = millis() + showHowLong;
}
void networkOverlay(const char* line1, long showHowLong) {
if (displayTurnedOff) {
// Turn the display back on
sleepOrClock(false);
}
// Print the overlay
clear();
// First row string
if (line1) drawString(0, 0, line1);
// Second row with Wifi name
String ssidString = knownSsid.substring(0, getCols() > 1 ? getCols() - 2 : 0); //
drawString(0, lineHeight, ssidString.c_str());
// Print `~` char to indicate that SSID is longer, than our display
if (knownSsid.length() > getCols()) {
drawString(getCols() - 1, 0, "~");
}
// Third row with IP and Psssword in AP Mode
drawString(0, lineHeight*2, (knownIp.toString()).c_str());
if (apActive) {
String appassword = apPass;
drawString(0, lineHeight*3, appassword.c_str());
}
overlayUntil = millis() + showHowLong;
}
/**
* Enable sleep (turn the display off) or clock mode.
*/
void sleepOrClock(bool enabled) {
if (enabled) {
if (clockMode) {
clear();
knownMinute = 99;
showTime();
}else setPowerSave(1);
displayTurnedOff = true;
}
else {
setPowerSave(0);
displayTurnedOff = false;
}
}
/**
* Display the current date and time in large characters
* on the middle rows. Based 24 or 12 hour depending on
* the useAMPM configuration.
*/
void showTime() {
if(knownMinute != minute(localTime)){ //only redraw clock if it has changed
char lineBuffer[LINE_BUFFER_SIZE];
//updateLocalTime();
byte AmPmHour = hour(localTime);
boolean isitAM = true;
if (useAMPM) {
if (AmPmHour > 11) AmPmHour -= 12;
if (AmPmHour == 0) AmPmHour = 12;
if (hour(localTime) > 11) isitAM = false;
}
clear();
drawStatusIcons(); //icons power, wifi, timer, etc
sprintf_P(lineBuffer, PSTR("%s %2d "), monthShortStr(month(localTime)), day(localTime));
draw2x2String(DATE_INDENT, lineHeight==1 ? 0 : lineHeight, lineBuffer); // adjust for 8 line displays, draw month and day
sprintf_P(lineBuffer,PSTR("%2d:%02d"), (useAMPM ? AmPmHour : hour(localTime)), minute(localTime));
draw2x2String(TIME_INDENT+2, lineHeight*2, lineBuffer); //draw hour, min. blink ":" depending on odd/even seconds
if (useAMPM) drawString(12, lineHeight*2, (isitAM ? "AM" : "PM"), true); //draw am/pm if using 12 time
knownMinute = minute(localTime);
}
}
/*
* addToJsonInfo() can be used to add custom entries to the /json/info part of the JSON API.
* Creating an "u" object allows you to add custom key/value pairs to the Info section of the WLED web UI.
* Below it is shown how this could be used for e.g. a light sensor
*/
//void addToJsonInfo(JsonObject& root) {
//JsonObject user = root["u"];
//if (user.isNull()) user = root.createNestedObject("u");
//JsonArray data = user.createNestedArray(F("4LineDisplay"));
//data.add(F("Loaded."));
//}
/*
* addToJsonState() can be used to add custom entries to the /json/state part of the JSON API (state object).
* Values in the state object may be modified by connected clients
*/
//void addToJsonState(JsonObject& root) {
//}
/*
* readFromJsonState() can be used to receive data clients send to the /json/state part of the JSON API (state object).
* Values in the state object may be modified by connected clients
*/
//void readFromJsonState(JsonObject& root) {
// if (!initDone) return; // prevent crash on boot applyPreset()
//}
/*
* addToConfig() can be used to add custom persistent settings to the cfg.json file in the "um" (usermod) object.
* It will be called by WLED when settings are actually saved (for example, LED settings are saved)
* If you want to force saving the current state, use serializeConfig() in your loop().
*
* CAUTION: serializeConfig() will initiate a filesystem write operation.
* It might cause the LEDs to stutter and will cause flash wear if called too often.
* Use it sparingly and always in the loop, never in network callbacks!
*
* addToConfig() will also not yet add your setting to one of the settings pages automatically.
* To make that work you still have to add the setting to the HTML, xml.cpp and set.cpp manually.
*
* I highly recommend checking out the basics of ArduinoJson serialization and deserialization in order to use custom settings!
*/
void addToConfig(JsonObject& root) {
JsonObject top = root.createNestedObject(FPSTR(_name));
JsonArray io_pin = top.createNestedArray("pin");
for (byte i=0; i<5; i++) io_pin.add(ioPin[i]);
top["help4PinTypes"] = F("Clk,Data,CS,DC,RST"); // help for Settings page
top["type"] = type;
top[FPSTR(_flip)] = (bool) flip;
top[FPSTR(_contrast)] = contrast;
top[FPSTR(_refreshRate)] = refreshRate/10;
top[FPSTR(_screenTimeOut)] = screenTimeout/1000;
top[FPSTR(_sleepMode)] = (bool) sleepMode;
top[FPSTR(_clockMode)] = (bool) clockMode;
top[FPSTR(_busClkFrequency)] = ioFrequency/1000;
DEBUG_PRINTLN(F("4 Line Display config saved."));
}
/*
* readFromConfig() can be used to read back the custom settings you added with addToConfig().
* This is called by WLED when settings are loaded (currently this only happens once immediately after boot)
*
* readFromConfig() is called BEFORE setup(). This means you can use your persistent values in setup() (e.g. pin assignments, buffer sizes),
* but also that if you want to write persistent values to a dynamic buffer, you'd need to allocate it here instead of in setup.
* If you don't know what that is, don't fret. It most likely doesn't affect your use case :)
*/
bool readFromConfig(JsonObject& root) {
bool needsRedraw = false;
DisplayType newType = type;
int8_t newPin[5]; for (byte i=0; i<5; i++) newPin[i] = ioPin[i];
JsonObject top = root[FPSTR(_name)];
if (top.isNull()) {
DEBUG_PRINT(FPSTR(_name));
DEBUG_PRINTLN(F(": No config found. (Using defaults.)"));
return false;
}
newType = top["type"] | newType;
for (byte i=0; i<5; i++) newPin[i] = top["pin"][i] | ioPin[i];
flip = top[FPSTR(_flip)] | flip;
contrast = top[FPSTR(_contrast)] | contrast;
refreshRate = (top[FPSTR(_refreshRate)] | refreshRate/10) * 10;
screenTimeout = (top[FPSTR(_screenTimeOut)] | screenTimeout/1000) * 1000;
sleepMode = top[FPSTR(_sleepMode)] | sleepMode;
clockMode = top[FPSTR(_clockMode)] | clockMode;
ioFrequency = min(3400, max(100, (int)(top[FPSTR(_busClkFrequency)] | ioFrequency/1000))) * 1000; // limit frequency
DEBUG_PRINT(FPSTR(_name));
if (!initDone) {
// first run: reading from cfg.json
for (byte i=0; i<5; i++) ioPin[i] = newPin[i];
type = newType;
DEBUG_PRINTLN(F(" config loaded."));
} else {
DEBUG_PRINTLN(F(" config (re)loaded."));
// changing parameters from settings page
bool pinsChanged = false;
for (byte i=0; i<5; i++) if (ioPin[i] != newPin[i]) { pinsChanged = true; break; }
if (pinsChanged || type!=newType) {
if (type != NONE) delete u8x8;
for (byte i=0; i<5; i++) {
if (ioPin[i]>=0) pinManager.deallocatePin(ioPin[i], PinOwner::UM_FourLineDisplay);
ioPin[i] = newPin[i];
}
if (ioPin[0]<0 || ioPin[1]<0) { // data & clock must be > -1
type = NONE;
return true;
} else type = newType;
setup();
needsRedraw |= true;
}
if (!(type == SSD1306_SPI || type == SSD1306_SPI64)) u8x8->setBusClock(ioFrequency); // can be used for SPI too
setContrast(contrast);
setFlipMode(flip);
if (needsRedraw && !wakeDisplay()) redraw(true);
}
// use "return !top["newestParameter"].isNull();" when updating Usermod with new features
return !(top[_busClkFrequency]).isNull();
}
/*
* getId() allows you to optionally give your V2 usermod an unique ID (please define it in const.h!).
* This could be used in the future for the system to determine whether your usermod is installed.
*/
uint16_t getId() {
return USERMOD_ID_FOUR_LINE_DISP;
}
};
// strings to reduce flash memory usage (used more than twice)
const char FourLineDisplayUsermod::_name[] PROGMEM = "4LineDisplay";
const char FourLineDisplayUsermod::_contrast[] PROGMEM = "contrast";
const char FourLineDisplayUsermod::_refreshRate[] PROGMEM = "refreshRate0.01Sec";
const char FourLineDisplayUsermod::_screenTimeOut[] PROGMEM = "screenTimeOutSec";
const char FourLineDisplayUsermod::_flip[] PROGMEM = "flip";
const char FourLineDisplayUsermod::_sleepMode[] PROGMEM = "sleepMode";
const char FourLineDisplayUsermod::_clockMode[] PROGMEM = "clockMode";
const char FourLineDisplayUsermod::_busClkFrequency[] PROGMEM = "i2c-freq-kHz";

45
usermods/usermod_v2_rotary_encoder_ui_ALT/readme.md Normal file
View File

@ -0,0 +1,45 @@
# Rotary Encoder UI Usermod ALT
Thank you to the authors of the original version of these usermods. It would not have been possible without them!
"usermod_v2_four_line_display"
"usermod_v2_rotary_encoder_ui"
The core of these usermods are a copy of the originals. The main changes are done to the FourLineDisplay usermod.
The display usermod UI has been completely changed.
The changes made to the RotaryEncoder usermod were made to support the new UI in the display usermod.
Without the display it functions identical to the original.
The original "usermod_v2_auto_save" will not work with the display just yet.
Press the encoder to cycle through the options:
*Brightness
*Speed
*Intensity
*Palette
*Effect
*Main Color (only if display is used)
*Saturation (only if display is used)
Press and hold the encoder to display Network Info
if AP is active then it will display AP ssid and Password
Also shows if the timer is enabled
[See the pair of usermods in action](https://www.youtube.com/watch?v=ulZnBt9z3TI)
## Installation
Please refer to the original `usermod_v2_rotary_encoder_ui` readme for the main instructions
Then to activate this alternative usermod add `#define USE_ALT_DISPlAY` to the `usermods_list.cpp` file,
or add `-D USE_ALT_DISPlAY` to the original `platformio_override.ini.sample` file
### PlatformIO requirements
Note: the Four Line Display usermod requires the libraries `U8g2` and `Wire`.
## Change Log
2021-10
* First public release

569
usermods/usermod_v2_rotary_encoder_ui_ALT/usermod_v2_rotary_encoder_ui_ALT.h Normal file
View File

@ -0,0 +1,569 @@
#pragma once
#include "wled.h"
//
// Inspired by the original v2 usermods
// * usermod_v2_rotaty_encoder_ui
//
// v2 usermod that provides a rotary encoder-based UI.
//
// This usermod allows you to control:
//
// * Brightness
// * Selected Effect
// * Effect Speed
// * Effect Intensity
// * Palette
//
// Change between modes by pressing a button.
//
// Dependencies
// * This usermod REQURES the ModeSortUsermod
// * This Usermod works best coupled with
// FourLineDisplayUsermod.
//
// If FourLineDisplayUsermod is used the folowing options are also inabled
//
// * main color
// * saturation of main color
// * display network (long press buttion)
//
#ifndef ENCODER_DT_PIN
#define ENCODER_DT_PIN 18
#endif
#ifndef ENCODER_CLK_PIN
#define ENCODER_CLK_PIN 5
#endif
#ifndef ENCODER_SW_PIN
#define ENCODER_SW_PIN 19
#endif
// The last UI state, remove color and saturation option if diplay not active(too many options)
#ifdef USERMOD_FOUR_LINE_DISPLAY
#define LAST_UI_STATE 6
#else
#define LAST_UI_STATE 4
#endif
class RotaryEncoderUIUsermod : public Usermod {
private:
int fadeAmount = 5; // Amount to change every step (brightness)
unsigned long currentTime;
unsigned long loopTime;
unsigned long buttonHoldTIme;
int8_t pinA = ENCODER_DT_PIN; // DT from encoder
int8_t pinB = ENCODER_CLK_PIN; // CLK from encoder
int8_t pinC = ENCODER_SW_PIN; // SW from encoder
unsigned char select_state = 0; // 0: brightness, 1: effect, 2: effect speed
unsigned char button_state = HIGH;
unsigned char prev_button_state = HIGH;
bool networkShown = false;
uint16_t currentHue1 = 6425; // default reboot color
byte currentSat1 = 255;
#ifdef USERMOD_FOUR_LINE_DISPLAY
FourLineDisplayUsermod *display;
#else
void* display = nullptr;
#endif
byte *modes_alpha_indexes = nullptr;
byte *palettes_alpha_indexes = nullptr;
unsigned char Enc_A;
unsigned char Enc_B;
unsigned char Enc_A_prev = 0;
bool currentEffectAndPaletteInitialized = false;
uint8_t effectCurrentIndex = 0;
uint8_t effectPaletteIndex = 0;
uint8_t knownMode = 0;
uint8_t knownPalette = 0;
bool initDone = false;
bool enabled = true;
// strings to reduce flash memory usage (used more than twice)
static const char _name[];
static const char _enabled[];
static const char _DT_pin[];
static const char _CLK_pin[];
static const char _SW_pin[];
public:
/*
* setup() is called once at boot. WiFi is not yet connected at this point.
* You can use it to initialize variables, sensors or similar.
*/
void setup()
{
PinManagerPinType pins[3] = { { pinA, false }, { pinB, false }, { pinC, false } };
if (!pinManager.allocateMultiplePins(pins, 3, PinOwner::UM_RotaryEncoderUI)) {
// BUG: configuring this usermod with conflicting pins
// will cause it to de-allocate pins it does not own
// (at second config)
// This is the exact type of bug solved by pinManager
// tracking the owner tags....
pinA = pinB = pinC = -1;
enabled = false;
return;
}
pinMode(pinA, INPUT_PULLUP);
pinMode(pinB, INPUT_PULLUP);
pinMode(pinC, INPUT_PULLUP);
currentTime = millis();
loopTime = currentTime;
ModeSortUsermod *modeSortUsermod = (ModeSortUsermod*) usermods.lookup(USERMOD_ID_MODE_SORT);
modes_alpha_indexes = modeSortUsermod->getModesAlphaIndexes();
palettes_alpha_indexes = modeSortUsermod->getPalettesAlphaIndexes();
#ifdef USERMOD_FOUR_LINE_DISPLAY
// This Usermod uses FourLineDisplayUsermod for the best experience.
// But it's optional. But you want it.
display = (FourLineDisplayUsermod*) usermods.lookup(USERMOD_ID_FOUR_LINE_DISP);
if (display != nullptr) {
display->setMarkLine(1, 0);
}
#endif
initDone = true;
Enc_A = digitalRead(pinA); // Read encoder pins
Enc_B = digitalRead(pinB);
Enc_A_prev = Enc_A;
}
/*
* connected() is called every time the WiFi is (re)connected
* Use it to initialize network interfaces
*/
void connected()
{
//Serial.println("Connected to WiFi!");
}
/*
* loop() is called continuously. Here you can check for events, read sensors, etc.
*
* Tips:
* 1. You can use "if (WLED_CONNECTED)" to check for a successful network connection.
* Additionally, "if (WLED_MQTT_CONNECTED)" is available to check for a connection to an MQTT broker.
*
* 2. Try to avoid using the delay() function. NEVER use delays longer than 10 milliseconds.
* Instead, use a timer check as shown here.
*/
void loop()
{
currentTime = millis(); // get the current elapsed time
// Initialize effectCurrentIndex and effectPaletteIndex to
// current state. We do it here as (at least) effectCurrent
// is not yet initialized when setup is called.
if (!currentEffectAndPaletteInitialized) {
findCurrentEffectAndPalette();}
if(modes_alpha_indexes[effectCurrentIndex] != effectCurrent
|| palettes_alpha_indexes[effectPaletteIndex] != effectPalette){
currentEffectAndPaletteInitialized = false;
}
if (currentTime >= (loopTime + 2)) // 2ms since last check of encoder = 500Hz
{
button_state = digitalRead(pinC);
if (prev_button_state != button_state)
{
if (button_state == HIGH && (millis()-buttonHoldTIme < 3000))
{
prev_button_state = button_state;
char newState = select_state + 1;
if (newState > LAST_UI_STATE) newState = 0;
bool changedState = true;
if (display != nullptr) {
switch(newState) {
case 0:
changedState = changeState(" Brightness", 1, 0, 1);
break;
case 1:
changedState = changeState(" Speed", 1, 4, 2);
break;
case 2:
changedState = changeState(" Intensity", 1 ,8, 3);
break;
case 3:
changedState = changeState(" Color Palette", 2, 0, 4);
break;
case 4:
changedState = changeState(" Effect", 3, 0, 5);
break;
case 5:
changedState = changeState(" Main Color", 255, 255, 7);
break;
case 6:
changedState = changeState(" Saturation", 255, 255, 8);
break;
}
}
if (changedState) {
select_state = newState;
}
}
else
{
prev_button_state = button_state;
networkShown = false;
if(!prev_button_state)buttonHoldTIme = millis();
}
}
if (!prev_button_state && (millis()-buttonHoldTIme > 3000) && !networkShown) displayNetworkInfo(); //long press for network info
Enc_A = digitalRead(pinA); // Read encoder pins
Enc_B = digitalRead(pinB);
if ((Enc_A) && (!Enc_A_prev))
{ // A has gone from high to low
if (Enc_B == LOW) //changes to LOW so that then encoder registers a change at the very end of a pulse
{ // B is high so clockwise
switch(select_state) {
case 0:
changeBrightness(true);
break;
case 1:
changeEffectSpeed(true);
break;
case 2:
changeEffectIntensity(true);
break;
case 3:
changePalette(true);
break;
case 4:
changeEffect(true);
break;
case 5:
changeHue(true);
break;
case 6:
changeSat(true);
break;
}
}
else if (Enc_B == HIGH)
{ // B is low so counter-clockwise
switch(select_state) {
case 0:
changeBrightness(false);
break;
case 1:
changeEffectSpeed(false);
break;
case 2:
changeEffectIntensity(false);
break;
case 3:
changePalette(false);
break;
case 4:
changeEffect(false);
break;
case 5:
changeHue(false);
break;
case 6:
changeSat(false);
break;
}
}
}
Enc_A_prev = Enc_A; // Store value of A for next time
loopTime = currentTime; // Updates loopTime
}
}
void displayNetworkInfo(){
#ifdef USERMOD_FOUR_LINE_DISPLAY
display->networkOverlay(" NETWORK INFO", 15000);
networkShown = true;
#endif
}
void findCurrentEffectAndPalette() {
currentEffectAndPaletteInitialized = true;
for (uint8_t i = 0; i < strip.getModeCount(); i++) {
if (modes_alpha_indexes[i] == effectCurrent) {
effectCurrentIndex = i;
break;
}
}
for (uint8_t i = 0; i < strip.getPaletteCount(); i++) {
if (palettes_alpha_indexes[i] == effectPalette) {
effectPaletteIndex = i;
break;
}
}
}
boolean changeState(const char *stateName, byte markedLine, byte markedCol, byte glyph) {
#ifdef USERMOD_FOUR_LINE_DISPLAY
if (display != nullptr) {
if (display->wakeDisplay()) {
// Throw away wake up input
return false;
}
display->overlay(stateName, 750, glyph);
display->setMarkLine(markedLine, markedCol);
}
#endif
return true;
}
void lampUdated() {
//bool fxChanged = strip.setEffectConfig(effectCurrent, effectSpeed, effectIntensity, effectPalette);
//call for notifier -> 0: init 1: direct change 2: button 3: notification 4: nightlight 5: other (No notification)
// 6: fx changed 7: hue 8: preset cycle 9: blynk 10: alexa
colorUpdated(CALL_MODE_DIRECT_CHANGE);
updateInterfaces(CALL_MODE_DIRECT_CHANGE);
}
void changeBrightness(bool increase) {
#ifdef USERMOD_FOUR_LINE_DISPLAY
if (display && display->wakeDisplay()) {
// Throw away wake up input
return;
}
#endif
if (increase) bri = (bri + fadeAmount <= 255) ? (bri + fadeAmount) : 255;
else bri = (bri - fadeAmount >= 0) ? (bri - fadeAmount) : 0;
lampUdated();
#ifdef USERMOD_FOUR_LINE_DISPLAY
display->updateBrightness();
#endif
}
void changeEffect(bool increase) {
#ifdef USERMOD_FOUR_LINE_DISPLAY
if (display && display->wakeDisplay()) {
// Throw away wake up input
return;
}
#endif
if (increase) effectCurrentIndex = (effectCurrentIndex + 1 >= strip.getModeCount()) ? 0 : (effectCurrentIndex + 1);
else effectCurrentIndex = (effectCurrentIndex - 1 < 0) ? (strip.getModeCount() - 1) : (effectCurrentIndex - 1);
effectCurrent = modes_alpha_indexes[effectCurrentIndex];
lampUdated();
#ifdef USERMOD_FOUR_LINE_DISPLAY
display->showCurrentEffectOrPalette(effectCurrent, JSON_mode_names, 3);
#endif
}
void changeEffectSpeed(bool increase) {
#ifdef USERMOD_FOUR_LINE_DISPLAY
if (display && display->wakeDisplay()) {
// Throw away wake up input
return;
}
#endif
if (increase) effectSpeed = (effectSpeed + fadeAmount <= 255) ? (effectSpeed + fadeAmount) : 255;
else effectSpeed = (effectSpeed - fadeAmount >= 0) ? (effectSpeed - fadeAmount) : 0;
lampUdated();
#ifdef USERMOD_FOUR_LINE_DISPLAY
display->updateSpeed();
#endif
}
void changeEffectIntensity(bool increase) {
#ifdef USERMOD_FOUR_LINE_DISPLAY
if (display && display->wakeDisplay()) {
// Throw away wake up input
return;
}
#endif
if (increase) effectIntensity = (effectIntensity + fadeAmount <= 255) ? (effectIntensity + fadeAmount) : 255;
else effectIntensity = (effectIntensity - fadeAmount >= 0) ? (effectIntensity - fadeAmount) : 0;
lampUdated();
#ifdef USERMOD_FOUR_LINE_DISPLAY
display->updateIntensity();
#endif
}
void changePalette(bool increase) {
#ifdef USERMOD_FOUR_LINE_DISPLAY
if (display && display->wakeDisplay()) {
// Throw away wake up input
return;
}
#endif
if (increase) effectPaletteIndex = (effectPaletteIndex + 1 >= strip.getPaletteCount()) ? 0 : (effectPaletteIndex + 1);
else effectPaletteIndex = (effectPaletteIndex - 1 < 0) ? (strip.getPaletteCount() - 1) : (effectPaletteIndex - 1);
effectPalette = palettes_alpha_indexes[effectPaletteIndex];
lampUdated();
#ifdef USERMOD_FOUR_LINE_DISPLAY
display->showCurrentEffectOrPalette(effectPalette, JSON_palette_names, 2);
#endif
}
void changeHue(bool increase){
#ifdef USERMOD_FOUR_LINE_DISPLAY
if (display && display->wakeDisplay()) {
// Throw away wake up input
return;
}
#endif
if(increase) currentHue1 += 321;
else currentHue1 -= 321;
colorHStoRGB(currentHue1, currentSat1, col);
lampUdated();
#ifdef USERMOD_FOUR_LINE_DISPLAY
display->updateRedrawTime();
#endif
}
void changeSat(bool increase){
#ifdef USERMOD_FOUR_LINE_DISPLAY
if (display && display->wakeDisplay()) {
// Throw away wake up input
return;
}
#endif
if(increase) currentSat1 = (currentSat1 + 5 <= 255 ? (currentSat1 + 5) : 255);
else currentSat1 = (currentSat1 - 5 >= 0 ? (currentSat1 - 5) : 0);
colorHStoRGB(currentHue1, currentSat1, col);
lampUdated();
#ifdef USERMOD_FOUR_LINE_DISPLAY
display->updateRedrawTime();
#endif
}
/*
* addToJsonInfo() can be used to add custom entries to the /json/info part of the JSON API.
* Creating an "u" object allows you to add custom key/value pairs to the Info section of the WLED web UI.
* Below it is shown how this could be used for e.g. a light sensor
*/
/*
void addToJsonInfo(JsonObject& root)
{
int reading = 20;
//this code adds "u":{"Light":[20," lux"]} to the info object
JsonObject user = root["u"];
if (user.isNull()) user = root.createNestedObject("u");
JsonArray lightArr = user.createNestedArray("Light"); //name
lightArr.add(reading); //value
lightArr.add(" lux"); //unit
}
*/
/*
* addToJsonState() can be used to add custom entries to the /json/state part of the JSON API (state object).
* Values in the state object may be modified by connected clients
*/
void addToJsonState(JsonObject &root)
{
//root["user0"] = userVar0;
}
/*
* readFromJsonState() can be used to receive data clients send to the /json/state part of the JSON API (state object).
* Values in the state object may be modified by connected clients
*/
void readFromJsonState(JsonObject &root)
{
//userVar0 = root["user0"] | userVar0; //if "user0" key exists in JSON, update, else keep old value
//if (root["bri"] == 255) Serial.println(F("Don't burn down your garage!"));
}
/**
* addToConfig() (called from set.cpp) stores persistent properties to cfg.json
*/
void addToConfig(JsonObject &root) {
// we add JSON object: {"Rotary-Encoder":{"DT-pin":12,"CLK-pin":14,"SW-pin":13}}
JsonObject top = root.createNestedObject(FPSTR(_name)); // usermodname
top[FPSTR(_enabled)] = enabled;
top[FPSTR(_DT_pin)] = pinA;
top[FPSTR(_CLK_pin)] = pinB;
top[FPSTR(_SW_pin)] = pinC;
DEBUG_PRINTLN(F("Rotary Encoder config saved."));
}
/**
* readFromConfig() is called before setup() to populate properties from values stored in cfg.json
*
* The function should return true if configuration was successfully loaded or false if there was no configuration.
*/
bool readFromConfig(JsonObject &root) {
// we look for JSON object: {"Rotary-Encoder":{"DT-pin":12,"CLK-pin":14,"SW-pin":13}}
JsonObject top = root[FPSTR(_name)];
if (top.isNull()) {
DEBUG_PRINT(FPSTR(_name));
DEBUG_PRINTLN(F(": No config found. (Using defaults.)"));
return false;
}
int8_t newDTpin = pinA;
int8_t newCLKpin = pinB;
int8_t newSWpin = pinC;
enabled = top[FPSTR(_enabled)] | enabled;
newDTpin = top[FPSTR(_DT_pin)] | newDTpin;
newCLKpin = top[FPSTR(_CLK_pin)] | newCLKpin;
newSWpin = top[FPSTR(_SW_pin)] | newSWpin;
DEBUG_PRINT(FPSTR(_name));
if (!initDone) {
// first run: reading from cfg.json
pinA = newDTpin;
pinB = newCLKpin;
pinC = newSWpin;
DEBUG_PRINTLN(F(" config loaded."));
} else {
DEBUG_PRINTLN(F(" config (re)loaded."));
// changing parameters from settings page
if (pinA!=newDTpin || pinB!=newCLKpin || pinC!=newSWpin) {
pinManager.deallocatePin(pinA, PinOwner::UM_RotaryEncoderUI);
pinManager.deallocatePin(pinB, PinOwner::UM_RotaryEncoderUI);
pinManager.deallocatePin(pinC, PinOwner::UM_RotaryEncoderUI);
pinA = newDTpin;
pinB = newCLKpin;
pinC = newSWpin;
if (pinA<0 || pinB<0 || pinC<0) {
enabled = false;
return true;
}
setup();
}
}
// use "return !top["newestParameter"].isNull();" when updating Usermod with new features
return !top[FPSTR(_enabled)].isNull();
}
/*
* getId() allows you to optionally give your V2 usermod an unique ID (please define it in const.h!).
* This could be used in the future for the system to determine whether your usermod is installed.
*/
uint16_t getId()
{
return USERMOD_ID_ROTARY_ENC_UI;
}
};
// strings to reduce flash memory usage (used more than twice)
const char RotaryEncoderUIUsermod::_name[] PROGMEM = "Rotary-Encoder";
const char RotaryEncoderUIUsermod::_enabled[] PROGMEM = "enabled";
const char RotaryEncoderUIUsermod::_DT_pin[] PROGMEM = "DT-pin";
const char RotaryEncoderUIUsermod::_CLK_pin[] PROGMEM = "CLK-pin";
const char RotaryEncoderUIUsermod::_SW_pin[] PROGMEM = "SW-pin";

15
wled00/bus_manager.h
View File

@ -43,7 +43,7 @@ struct BusConfig {
type = busType & 0x7F; // bit 7 may be/is hacked to include RGBW info (1=RGBW, 0=RGB)
count = len; start = pstart; colorOrder = pcolorOrder; reversed = rev; skipAmount = skip;
uint8_t nPins = 1;
if (type >= 10 && type <= 15) nPins = 4; // IP address stored in pins
if (type >= TYPE_NET_DDP_RGB && type < 96) nPins = 4; //virtual network bus. 4 "pins" store IP address
else if (type > 47) nPins = 2;
else if (type > 40 && type < 46) nPins = NUM_PWM_PINS(type);
for (uint8_t i = 0; i < nPins; i++) pins[i] = ppins[i];
@ -157,6 +157,7 @@ class BusDigital : public Bus {
_busPtr = PolyBus::create(_iType, _pins, _len, nr);
_valid = (_busPtr != nullptr);
_colorOrder = bc.colorOrder;
DEBUG_PRINTF("Successfully inited strip %u (len %u) with type %u and pins %u,%u (itype %u)\n",nr, _len, bc.type, _pins[0],_pins[1],_iType);
};
inline void show() {
@ -222,6 +223,7 @@ class BusDigital : public Bus {
}
void cleanup() {
DEBUG_PRINTLN(F("Digital Cleanup"));
PolyBus::cleanup(_busPtr, _iType);
_iType = I_NONE;
_valid = false;
@ -325,6 +327,7 @@ class BusPwm : public Bus {
}
uint8_t getPins(uint8_t* pinArray) {
if (!_valid) return 0;
uint8_t numPins = NUM_PWM_PINS(_type);
for (uint8_t i = 0; i < numPins; i++) {
pinArray[i] = _pins[i];
@ -397,7 +400,7 @@ class BusNetwork : public Bus {
if (_data == nullptr) return;
memset(_data, 0, bc.count * _UDPchannels);
_len = bc.count;
_colorOrder = bc.colorOrder;
//_colorOrder = bc.colorOrder;
_client = IPAddress(bc.pins[0],bc.pins[1],bc.pins[2],bc.pins[3]);
_broadcastLock = false;
_valid = true;
@ -468,7 +471,7 @@ class BusNetwork : public Bus {
private:
IPAddress _client;
uint16_t _len = 0;
uint8_t _colorOrder;
//uint8_t _colorOrder;
uint8_t _bri = 255;
uint8_t _UDPtype;
uint8_t _UDPchannels;
@ -501,15 +504,14 @@ class BusManager {
return len*6;
#endif
}
if (type > 31 && type < 48) return 5;
if (type > 31 && type < 48) return 5;
if (type == 44 || type == 45) return len*4; //RGBW
return len*3; //RGB
}
int add(BusConfig &bc) {
if (numBusses >= WLED_MAX_BUSSES) return -1;
if (bc.type>=10 && bc.type<=15) {
if (bc.type >= TYPE_NET_DDP_RGB && bc.type < 96) {
busses[numBusses] = new BusNetwork(bc);
} else if (IS_DIGITAL(bc.type)) {
busses[numBusses] = new BusDigital(bc, numBusses);
@ -540,7 +542,6 @@ class BusManager {
uint16_t bstart = b->getStart();
if (pix < bstart || pix >= bstart + b->getLength()) continue;
busses[i]->setPixelColor(pix - bstart, c);
break;
}
}

1
wled00/cfg.cpp
View File

@ -276,6 +276,7 @@ bool deserializeConfig(JsonObject doc, bool fromFS) {
JsonObject if_live = interfaces["live"];
CJSON(receiveDirect, if_live["en"]);
CJSON(e131Port, if_live["port"]); // 5568
if (e131Port == DDP_DEFAULT_PORT) e131Port = E131_DEFAULT_PORT; // prevent double DDP port allocation
CJSON(e131Multicast, if_live[F("mc")]);
JsonObject if_live_dmx = if_live[F("dmx")];

22
wled00/const.h
View File

@ -59,7 +59,7 @@
#define USERMOD_ID_ELEKSTUBE_IPS 16 //Usermod "usermod_elekstube_ips.h"
#define USERMOD_ID_SN_PHOTORESISTOR 17 //Usermod "usermod_sn_photoresistor.h"
#define USERMOD_ID_BATTERY_STATUS_BASIC 18 //Usermod "usermod_v2_battery_status_basic.h"
#define USERMOD_ID_PWM_FAN 19 //Usermod "usermod-PWM-fan.h"
#define USERMOD_ID_PWM_FAN 19 //Usermod "usermod_PWM_fan.h"
//Access point behavior
#define AP_BEHAVIOR_BOOT_NO_CONN 0 //Open AP when no connection after boot
@ -113,13 +113,17 @@
#define DMX_MODE_MULTIPLE_DRGB 5 //every LED is addressed with its own RGB and share a master dimmer (ledCount * 3 + 1 channels)
#define DMX_MODE_MULTIPLE_RGBW 6 //every LED is addressed with its own RGBW (ledCount * 4 channels)
//Light capability byte (unused) 0bRRCCTTTT
//Light capability byte (unused) 0bRCCCTTTT
//bits 0/1/2/3: specifies a type of LED driver. A single "driver" may have different chip models but must have the same protocol/behavior
//bits 4/5: specifies the class of LED driver - 0b00 (dec. 0-15) unconfigured/reserved
// - 0b01 (dec. 16-31) digital (data pin only)
// - 0b10 (dec. 32-47) analog (PWM)
// - 0b11 (dec. 48-63) digital (data + clock / SPI)
//bits 6/7 are reserved and set to 0b00
//bits 4/5/6: specifies the class of LED driver - 0b000 (dec. 0-15) unconfigured/reserved
// - 0b001 (dec. 16-31) digital (data pin only)
// - 0b010 (dec. 32-47) analog (PWM)
// - 0b011 (dec. 48-63) digital (data + clock / SPI)
// - 0b100 (dec. 64-79) unused/reserved
// - 0b101 (dec. 80-95) digital (data + clock / SPI)
// - 0b110 (dec. 96-111) unused/reserved
// - 0b111 (dec. 112-127) unused/reserved
//bit 7 is reserved and set to 0
#define TYPE_NONE 0 //light is not configured
#define TYPE_RESERVED 1 //unused. Might indicate a "virtual" light
@ -147,6 +151,10 @@
#define TYPE_APA102 51
#define TYPE_LPD8806 52
#define TYPE_P9813 53
//Network types (master broadcast) (80-95)
#define TYPE_NET_DDP_RGB 80 //network DDP RGB bus (master broadcast bus)
#define TYPE_NET_E131_RGB 81 //network E131 RGB bus (master broadcast bus)
#define TYPE_NET_ARTNET_RGB 82 //network ArtNet RGB bus (master broadcast bus)
#define IS_DIGITAL(t) ((t) & 0x10) //digital are 16-31 and 48-63
#define IS_PWM(t) ((t) > 40 && (t) < 46)

3
wled00/data/index.js
View File

@ -1564,8 +1564,7 @@ function tglCs(i)
function tglSegn(s)
{
d.gId(`seg${s}t`).style.display =
(window.getComputedStyle(d.gId(`seg${s}t`)).display === "none") ? "inline":"none";
d.gId(`seg${s}t`).style.display = (window.getComputedStyle(d.gId(`seg${s}t`)).display === "none") ? "inline":"none";
}
function selSegEx(s)

143
wled00/data/settings_leds.htm
View File

@ -5,10 +5,11 @@
<meta name="viewport" content="width=500">
<title>LED Settings</title>
<script>
var d=document,laprev=55,maxB=1,maxM=5000,maxPB=4096,bquot=0; //maximum bytes for LED allocation: 5kB for 8266, 32kB for 32
function H()
var d=document,laprev=55,maxB=1,maxM=4000,maxPB=4096,maxL=1333,maxLbquot=0; //maximum bytes for LED allocation: 4kB for 8266, 32kB for 32
var customStarts=false,startsDirty=[];
function H()
{
window.open("https://github.com/Aircoookie/WLED/wiki/Settings#led-settings");
window.open("https://kno.wled.ge/features/settings/#led-settings");
}
function B()
{
@ -28,8 +29,8 @@
x.style.animation = 'none';
timeout = setTimeout(function(){ x.className = x.className.replace("show", ""); }, 2900);
}
function bLimits(b,p,m) {
maxB = b; maxM = m; maxPB = p;
function bLimits(b,p,m,l) {
maxB = b; maxM = m; maxPB = p; maxL = l;
}
function pinsOK() {
var LCs = d.getElementsByTagName("input");
@ -39,7 +40,7 @@
if (nm=="L0" || nm=="L1" || nm=="L2" || nm=="L3") {
var n = LCs[i].name.substring(2);
var t = parseInt(d.getElementsByName("LT"+n)[0].value, 10); // LED type SELECT
if (t<16) continue;
if (t>=80) continue;
}
//check for pin conflicts
if (nm=="L0" || nm=="L1" || nm=="L2" || nm=="L3" || nm=="L4" || nm=="RL" || nm=="BT" || nm=="IR")
@ -70,7 +71,7 @@
if (bquot > 100) {var msg = "Too many LEDs for me to handle!"; if (maxM < 10000) msg += "\n\rConsider using an ESP32."; alert(msg);}
if (d.Sf.checkValidity()) d.Sf.submit(); //https://stackoverflow.com/q/37323914
}
function S(){GetV();setABL();}
function S(){GetV();checkSi();setABL();}
function enABL()
{
var en = gId('able').checked;
@ -104,7 +105,7 @@
}
//returns mem usage
function getMem(t, len, p0) {
if (t > 15 && t < 32) {
if (t < 32) {
if (maxM < 10000 && p0==3) { //8266 DMA uses 5x the mem
if (t > 29) return len*20; //RGBW
return len*15;
@ -136,8 +137,8 @@
if (s[i].name.substring(0,2)=="LT") {
var n = s[i].name.substring(2);
var t = parseInt(s[i].value,10);
gId("p0d"+n).innerHTML = (t>=10 && t<=15) ? "IP address:" : (t > 49) ? "Data GPIO:" : (t >41) ? "GPIOs:" : "GPIO:";
gId("p1d"+n).innerHTML = (t > 49) ? "Clk GPIO:" : "";
gId("p0d"+n).innerHTML = (t>=80 && t<96) ? "IP address:" : (t > 49) ? "Data GPIO:" : (t >41) ? "GPIOs:" : "GPIO:";
gId("p1d"+n).innerHTML = (t> 49 && t<64) ? "Clk GPIO:" : "";
var LK = d.getElementsByName("L1"+n)[0]; // clock pin
memu += getMem(t, d.getElementsByName("LC"+n)[0].value, d.getElementsByName("L0"+n)[0].value); // calc memory
@ -146,7 +147,7 @@
for (p=1; p<5; p++) {
var LK = d.getElementsByName("L"+p+n)[0]; // secondary pins
if (!LK) continue;
if (((t>=10 && t<=15) && p<4) || (t>49 && p==1) || (t>41 && t < 50 && (p+40 < t))) // TYPE_xxxx values from const.h
if (((t>=80 && t<96) && p<4) || (t>49 && p==1) || (t>41 && t < 50 && (p+40 < t))) // TYPE_xxxx values from const.h
{
// display pin field
LK.style.display = "inline";
@ -161,18 +162,17 @@
if (change) {
// // blazoncek experimental extension
// gId("ew"+n).checked = (t == 30 || t == 31 || t == 44 || t == 45); // RGBW checkbox, TYPE_xxxx values from const.h
gId("ls"+n).value = n+1; // set LED start
if (t > 31 && t < 48) d.getElementsByName("LC"+n)[0].value = 1; // for sanity change analog count just to 1 LED
}
// // blazoncek experimental extension
// gId("ew"+n).onclick = (t > 31 && t < 48) ? (function(){return false}) : (function(){}); // prevent change for analog
// isRGBW |= gId("ew"+n).checked;
isRGBW |= (t == 30 || t == 31 || (t > 40 && t < 46 && t != 43)); // RGBW checkbox, TYPE_xxxx values from const.h
gId("co"+n).style.display = (t<16 || t == 41 || t == 42) ? "none":"inline"; // hide color order for PWM W & WW/CW
gId("co"+n).style.display = ((t>=80 && t<96) || t == 41 || t == 42) ? "none":"inline"; // hide color order for PWM W & WW/CW
gId("dig"+n+"c").style.display = (t > 40 && t < 48) ? "none":"inline"; // hide count for analog
gId("dig"+n+"r").style.display = (t<16) ? "none":"inline"; // hide reversed for virtual
gId("dig"+n+"s").style.display = (t<16 || (t > 40 && t < 48)) ? "none":"inline"; // hide skip 1st for virtual & analog
gId("rev"+n).innerHTML = (t > 40 && t < 48) ? "Inverted":"Reverse (rotated 180°)"; // change reverse text for analog
gId("dig"+n+"r").style.display = (t>=80 && t<96) ? "none":"inline"; // hide reversed for virtual
gId("dig"+n+"s").style.display = ((t>=80 && t<96) || (t > 40 && t < 48)) ? "none":"inline"; // hide skip 1st for virtual & analog
gId("rev"+n).innerHTML = (t > 40 && t < 48) ? "Inverted output":"Reversed (rotated 180°)"; // change reverse text for analog
gId("psd"+n).innerHTML = (t > 40 && t < 48) ? "Index:":"Start:"; // change analog start description
}
}
@ -184,15 +184,22 @@
}
// check for pin conflicts
var LCs = d.getElementsByTagName("input");
var sLC = 0, maxLC = 0;
var sLC = 0, sPC = 0, maxLC = 0;
for (i=0; i<LCs.length; i++) {
var nm = LCs[i].name.substring(0,2); // field name
var n = LCs[i].name.substring(2); // bus number
// do we have a led count field but not total led count
if (nm=="LC" && LCs[i].name !== "LC") {
// do we have a led count field
if (nm=="LC") {
var c=parseInt(LCs[i].value,10);
/*if(gId("ls"+n).readOnly)*/ gId("ls"+n).value=sLC; // update led start field
if(c){sLC+=c;if(c>maxLC)maxLC=c;} // increase led count
if (!customStarts || !startsDirty[n]) gId("ls"+n).value=sLC;
gId("ls"+n).disabled = !customStarts;
if(c){
var s = parseInt(gId("ls"+n).value);
if (s+c > sLC) sLC = s+c;
if(c>maxLC)maxLC=c;
var t = parseInt(d.getElementsByName("LT"+n)[0].value); // LED type SELECT
if (t<80) sPC+=c; //virtual out busses do not count towards physical LEDs
} // increase led count
continue;
}
// do we have led pins for digital leds
@ -200,12 +207,13 @@
var lc=d.getElementsByName("LC"+n)[0];
lc.max=maxPB; // update max led count value
}
// ignore IP address
// ignore IP address (stored in pins for virtual busses)
if (nm=="L0" || nm=="L1" || nm=="L2" || nm=="L3") {
var t = parseInt(d.getElementsByName("LT"+n)[0].value, 10); // LED type SELECT
if (t<16) {
var t = parseInt(d.getElementsByName("LT"+n)[0].value); // LED type SELECT
if (t>=80) {
LCs[i].max = 255;
LCs[i].min = 0;
LCs[i].style.color="#fff";
continue; // do not check conflicts
} else {
LCs[i].max = 33;
@ -224,7 +232,7 @@
if (n2.substring(0,1)==="L") {
var m = LCs[j].name.substring(2);
var t2 = parseInt(d.getElementsByName("LT"+m)[0].value, 10);
if (t2<16) continue;
if (t2>=80) continue;
}
if (LCs[j].value!="" && LCs[j].value!="-1") p.push(parseInt(LCs[j].value,10)); // add current pin
}
@ -234,22 +242,18 @@
}
}
// update total led count
if (gId("LC").readOnly) d.getElementsByName("LC")[0].value = sLC;
// if we are changing total led count update led count for 1st strip
if (d.activeElement == d.getElementsByName("LC")[0]) {
var o = d.getElementsByClassName("iST");
var i = o.length;
if (i == 1) d.getElementsByName("LC0")[0].value = d.getElementsByName("LC")[0].value;
}
gId("lc").textContent = sLC;
gId("pc").textContent = (sLC == sPC) ? "":"(" + sPC + " physical)";
// memory usage and warnings
gId('m0').innerHTML = memu;
bquot = memu / maxM * 100;
gId('dbar').style.background = `linear-gradient(90deg, ${bquot > 60 ? (bquot > 90 ? "red":"orange"):"#ccc"} 0 ${bquot}%%, #444 ${bquot}%% 100%%)`;
gId('ledwarning').style.display = (sLC > maxPB || maxLC > 800 || bquot > 80) ? 'inline':'none';
gId('ledwarning').style.color = (sLC > maxPB || maxLC > maxPB || bquot > 100) ? 'red':'orange';
gId('wreason').innerHTML = (bquot > 80) ? "80% of max. LED memory" +(bquot>100 ? ` (<b>WARNING: Using over ${maxM}B!</b>)` : "") : "800 LEDs per GPIO";
gId('wreason').innerHTML = (bquot > 80) ? "80% of max. LED memory" +(bquot>100 ? ` (<b>ERROR: Using over ${maxM}B!</b>)` : "") : "800 LEDs per output";
// calculate power
var val = Math.ceil((100 + sLC * laprev)/500)/2;
var val = Math.ceil((100 + sPC * laprev)/500)/2;
val = (val > 5) ? Math.ceil(val) : val;
var s = "";
var is12V = (d.Sf.LAsel.value == 30);
@ -263,7 +267,7 @@
s += val;
s += "A supply connected to LEDs";
}
var val2 = Math.ceil((100 + sLC * laprev)/1500)/2;
var val2 = Math.ceil((100 + sPC * laprev)/1500)/2;
val2 = (val2 > 5) ? Math.ceil(val2) : val2;
var s2 = "(for most effects, ~";
s2 += val2;
@ -280,10 +284,8 @@
if (isNaN(v)) return 0;
return v;
}
function addLEDs(n)
function addLEDs(n,init=true)
{
if (n>1) {maxB=n; gId("+").style.display="inline"; return;}
var o = d.getElementsByClassName("iST");
var i = o.length;
@ -309,9 +311,9 @@ ${i+1}:
<option value="43">PWM RGB</option>
<option value="44">PWM RGBW</option>
<option value="45">PWM RGBWC</option>
<option value="10">DDP RGB (network)</option>
<!--option value="11">E1.31 RGB (network)</option-->
<!--option value="12">ArtNet RGB (network)</option-->
<option value="80">DDP RGB (network)</option>
<!--option value="81">E1.31 RGB (network)</option-->
<!--option value="82">ArtNet RGB (network)</option-->
</select>&nbsp;
<div id="co${i}" style="display:inline">Color Order:
<select name="CO${i}">
@ -323,18 +325,17 @@ ${i+1}:
<option value="5">GBR</option>
</select></div>
<br>
<span id="p0d${i}">GPIO:</span><input type="number" name="L0${i}" min="0" max="33" required class="s" onchange="UI()"/>
<span id="p1d${i}"></span><input type="number" name="L1${i}" min="0" max="33" class="s" onchange="UI()"/>
<span id="p2d${i}"></span><input type="number" name="L2${i}" min="0" max="33" class="s" onchange="UI()"/>
<span id="p3d${i}"></span><input type="number" name="L3${i}" min="0" max="33" class="s" onchange="UI()"/>
<span id="p4d${i}"></span><input type="number" name="L4${i}" min="0" max="33" class="s" onchange="UI()"/>
<span id="psd${i}">Start:</span> <input type="number" name="LS${i}" id="ls${i}" class="l starts" min="0" max="8191" value="${lastEnd(i)}" oninput="startsDirty[${i}]=true;UI();" required />&nbsp;
<div id="dig${i}c" style="display:inline">Length: <input type="number" name="LC${i}" class="l" min="1" max="${maxPB}" value="1" required oninput="UI()" /></div>
<br>
<span id="psd${i}">Start:</span> <input type="number" name="LS${i}" id="ls${i}" class="l" min="0" max="8191" value="${lastEnd(i)}" disabled readonly required />&nbsp;
<div id="dig${i}c" style="display:inline">Count: <input type="number" name="LC${i}" class="l" min="0" max="${maxPB}" value="1" required oninput="UI()" /></div>
<span id="p0d${i}">GPIO:</span> <input type="number" name="L0${i}" min="0" max="33" required class="xs" onchange="UI()"/>
<span id="p1d${i}"></span><input type="number" name="L1${i}" min="0" max="33" class="xs" onchange="UI()"/>
<span id="p2d${i}"></span><input type="number" name="L2${i}" min="0" max="33" class="xs" onchange="UI()"/>
<span id="p3d${i}"></span><input type="number" name="L3${i}" min="0" max="33" class="xs" onchange="UI()"/>
<span id="p4d${i}"></span><input type="number" name="L4${i}" min="0" max="33" class="xs" onchange="UI()"/>
<br>
<div id="dig${i}r" style="display:inline"><span id="rev${i}">Reversed</span>: <input type="checkbox" name="CV${i}"></div>&nbsp;
<div id="dig${i}r" style="display:inline"><span id="rev${i}">Reversed</span>: <input type="checkbox" name="CV${i}">&nbsp;</div>
<div id="dig${i}s" style="display:inline">Skip 1<sup>st</sup> LED: <input id="sl${i}" type="checkbox" name="SL${i}"></div>
<br>
</div>`;
f.insertAdjacentHTML("beforeend", cn);
}
@ -345,14 +346,14 @@ ${i+1}:
gId("+").style.display = (i<maxB-1) ? "inline":"none";
gId("-").style.display = (i>0) ? "inline":"none";
UI();
if (!init) UI();
}
function addBtn(i,p,t) {
var c = gId("btns").innerHTML;
var bt = "BT" + i;
var be = "BE" + i;
c += `Button ${i} GPIO: <input type="number" min="-1" max="40" name="${bt}" onchange="UI()" class="s" value="${p}">`;
c += `<select name="${be}">`
c += `Button ${i} GPIO: <input type="number" min="-1" max="40" name="${bt}" onchange="UI()" class="xs" value="${p}">`;
c += `&nbsp;<select name="${be}">`
c += `<option value="0" ${t==0?"selected":""}>Disabled</option>`;
c += `<option value="2" ${t==2?"selected":""}>Pushbutton</option>`;
c += `<option value="3" ${t==3?"selected":""}>Push inverted</option>`;
@ -365,6 +366,21 @@ ${i+1}:
c += `<span style="cursor: pointer;" onclick="off('${bt}')">&nbsp;&#215;</span><br>`;
gId("btns").innerHTML = c;
}
function tglSi(cs) {
customStarts = cs;
if (!customStarts) startsDirty = []; //set all starts to clean
UI();
}
function checkSi() { //on load, checks whether there are custom start fields
var cs = false;
for (var i=1; i < d.getElementsByClassName("iST").length; i++) {
var v = parseInt(gId("ls"+(i-1)).value) + parseInt(d.getElementsByName("LC"+(i-1))[0].value);
if (v != parseInt(gId("ls"+i).value)) {cs = true; startsDirty[i] = true;}
}
if (parseInt(gId("ls0").value) != 0) {cs = true; startsDirty[0] = true;}
gId("si").checked = cs;
tglSi(cs);
}
function uploadFile(name) {
var req = new XMLHttpRequest();
req.addEventListener('load', function(){showToast(this.responseText,this.status >= 400)});
@ -379,7 +395,7 @@ ${i+1}:
function GetV()
{
//values injected by server while sending HTML
//maxM=5000;maxPB=1536;d.um_p=[1,6,7,8,9,10,11];addLEDs(5);d.Sf.LC.value=250;addLEDs(1);d.Sf.L00.value=2;d.Sf.L10.value=0;d.Sf.LC0.value=250;d.Sf.LT0.value=22;d.Sf.CO0.value=0;d.Sf.LS0.value=0;d.Sf.LS0.checked=0;d.Sf.MA.value=5400;d.Sf.LA.value=55;d.getElementsByClassName("pow")[0].innerHTML="350mA";d.Sf.CA.value=40;d.Sf.AW.value=3;d.Sf.BO.checked=0;d.Sf.BP.value=3;d.Sf.GB.checked=0;d.Sf.GC.checked=1;d.Sf.TF.checked=1;d.Sf.TD.value=700;d.Sf.PF.checked=0;d.Sf.BF.value=64;d.Sf.TB.value=0;d.Sf.TL.value=60;d.Sf.TW.value=1;d.Sf.PB.selectedIndex=0;d.Sf.RL.value=12;d.Sf.RM.checked=0;addBtn(0,0,2);addBtn(1,3,4);addBtn(2,-1,0);d.Sf.IR.value=-1;
//d.um_p=[6,7,8,9,10,11,1];bLimits(3,4096,4000,1664);d.Sf.MS.checked=1;addLEDs(1);d.Sf.L00.value=2;d.Sf.LC0.value=30;d.Sf.LT0.value=22;d.Sf.CO0.value=0;d.Sf.LS0.value=15;d.Sf.CV0.checked=1;d.Sf.SL0.checked=0;addLEDs(1);d.Sf.L01.value=10;d.Sf.L11.value=10;d.Sf.L21.value=1;d.Sf.L31.value=10;d.Sf.LC1.value=60;d.Sf.LT1.value=80;d.Sf.CO1.value=1;d.Sf.LS1.value=0;d.Sf.CV1.checked=0;d.Sf.SL1.checked=0;d.Sf.MA.value=850;d.Sf.LA.value=0;d.Sf.CA.value=56;d.Sf.AW.value=3;d.Sf.BO.checked=1;d.Sf.BP.value=80;d.Sf.GB.checked=0;d.Sf.GC.checked=1;d.Sf.TF.checked=1;d.Sf.TD.value=700;d.Sf.PF.checked=0;d.Sf.BF.value=100;d.Sf.TB.value=0;d.Sf.TL.value=60;d.Sf.TW.value=0;d.Sf.PB.selectedIndex=0;d.Sf.RL.value=12;d.Sf.RM.checked=1;addBtn(0,0,0);addBtn(1,-1,0);d.Sf.TT.value=32;d.Sf.IR.value=-1;d.Sf.IT.value=0;
}
</script>
<style>@import url("style.css");</style>
@ -391,7 +407,7 @@ ${i+1}:
<button type="button" onclick="B()">Back</button><button type="submit">Save</button><hr>
</div>
<h2>LED &amp; Hardware setup</h2>
Total LED count: <input name="LC" id="LC" type="number" min="1" max="8192" oninput="UI()" disabled required readonly><br>
Total LEDs: <span id="lc">?</span> <span id="pc"></span><br>
<i>Recommended power supply for brightest white:</i><br>
<b><span id="psu">?</span></b><br>
<span id="psu2"><br></span>
@ -423,20 +439,21 @@ ${i+1}:
<h3>Hardware setup</h3>
<div id="mLC">LED outputs:</div>
<hr style="width:260px">
<button type="button" id="+" onclick="addLEDs(1)">+</button>
<button type="button" id="-" onclick="addLEDs(-1)">-</button><br>
<button type="button" id="+" onclick="addLEDs(1,false)">+</button>
<button type="button" id="-" onclick="addLEDs(-1,false)">-</button><br>
LED Memory Usage: <span id="m0">0</span> / <span id="m1">?</span> B<br>
<div id="dbar" style="display:inline-block; width: 100px; height: 10px; border-radius: 20px;"></div><br>
<div id="ledwarning" style="color: orange; display: none;">
&#9888; You might run into stability or lag issues.<br>
Use less than <span id="wreason">800 LEDs per pin</span> for the best experience!<br>
Use less than <span id="wreason">800 LEDs per output</span> for the best experience!<br>
</div>
<hr style="width:260px">
Create a segment for each output: <input type="checkbox" name="MS"> <br>
Make a segment for each output: <input type="checkbox" name="MS"> <br>
Custom bus start indices: <input type="checkbox" onchange="tglSi(this.checked)" id="si"> <br>
<hr style="width:260px">
<div id="btns"></div>
Touch threshold: <input type="number" min="0" max="100" name="TT" required><br>
IR GPIO: <input type="number" min="-1" max="40" name="IR" onchange="UI()" class="s"><select name="IT" onchange="UI()">
Touch threshold: <input type="number" class="s" min="0" max="100" name="TT" required><br>
IR GPIO: <input type="number" min="-1" max="40" name="IR" onchange="UI()" class="xs"><select name="IT" onchange="UI()">
<option value=0>Remote disabled</option>
<option value=1>24-key RGB</option>
<option value=2>24-key with CT</option>
@ -449,8 +466,8 @@ ${i+1}:
</select><span style="cursor: pointer;" onclick="off('IR')">&nbsp;&#215;</span><br>
<div id="json" style="display:none;">JSON file: <input type="file" name="data" accept=".json"> <input type="button" value="Upload" onclick="uploadFile('/ir.json');"><br></div>
<div id="toast"></div>
<a href="https://github.com/Aircoookie/WLED/wiki/Infrared-Control" target="_blank">IR info</a><br>
Relay GPIO: <input type="number" min="-1" max="33" name="RL" onchange="UI()" class="s"> invert <input type="checkbox" name="RM"><span style="cursor: pointer;" onclick="off('RL')">&nbsp;&#215;</span><br>
<a href="https://kno.wled.ge/interfaces/infrared/" target="_blank">IR info</a><br>
Relay GPIO: <input type="number" min="-1" max="33" name="RL" onchange="UI()" class="xs"> Invert <input type="checkbox" name="RM"><span style="cursor: pointer;" onclick="off('RL')">&nbsp;&#215;</span><br>
<hr style="width:260px">
<h3>Defaults</h3>
Turn LEDs on after power up/reset: <input type="checkbox" name="BO"><br>

1
wled00/data/settings_sync.htm
View File

@ -102,7 +102,6 @@ Type:
<select name=DI onchange="SP(); adj();">
<option value=5568>E1.31 (sACN)</option>
<option value=6454>Art-Net</option>
<!--option value=4048>DDP</option-->
<option value=0 selected>Custom port</option>
</select><br>
<div id=xp>Port: <input name="EP" type="number" min="1" max="65535" value="5568" class="d5" required><br></div>

13
wled00/data/style.css
View File

@ -43,6 +43,9 @@ input {
font-family: Verdana, sans-serif;
border: 0.5ch solid #333;
}
input:disabled {
color: #888;
}
input[type="text"] {
font-size: medium;
}
@ -58,23 +61,23 @@ input[type="number"].xl {
width: 85px;
}
input[type="number"].l {
width: 63px;
width: 65px;
}
input[type="number"].m {
width: 56px;
width: 59px;
}
input[type="number"].s {
width: 49px;
width: 52px;
}
input[type="number"].xs {
width: 42px;
width: 46px;
}
select {
margin: 2px;
font-size: medium;
}
input[type="checkbox"] {
transform: scale(2);
transform: scale(1.5);
margin-right: 10px;
}
select {

55
wled00/html_settings.h
View File

File diff suppressed because one or more lines are too long

1577
wled00/html_ui.h
View File

File diff suppressed because it is too large Load Diff

5
wled00/set.cpp
View File

@ -128,11 +128,12 @@ void handleSettingsSet(AsyncWebServerRequest *request, byte subPage)
// actual finalization is done in WLED::loop() (removing old busses and adding new)
if (busConfigs[s] != nullptr) delete busConfigs[s];
busConfigs[s] = new BusConfig(type, pins, start, length, colorOrder, request->hasArg(cv), skip);
if (!doInitBusses) ledCount = 1;
doInitBusses = true;
uint16_t totalNew = start + length;
if (totalNew > ledCount && totalNew <= MAX_LEDS) ledCount = totalNew; //total is end of last bus (where start + len is max.)
}
ledCount = request->arg(F("LC")).toInt();
// upate other pins
int hw_ir_pin = request->arg(F("IR")).toInt();
if (pinManager.allocatePin(hw_ir_pin,false, PinOwner::IR)) {

4
wled00/udp.cpp
View File

@ -544,7 +544,7 @@ void sendSysInfoUDP()
//
// Send real time UDP updates to the specified client
//
// type - protocol type (1=DDP, 2=E1.31, 3=ArtNet)
// type - protocol type (0=DDP, 1=E1.31, 2=ArtNet)
// client - the IP address to send to
// length - the number of pixels
// buffer - a buffer of at least length*4 bytes long
@ -617,7 +617,7 @@ uint8_t realtimeBroadcast(uint8_t type, IPAddress client, uint16_t length, uint8
}
if (!ddpUdp.endPacket()) {
DEBUG_PRINTLN("WiFiUDP.endPacket returned an error");
DEBUG_PRINTLN(F("WiFiUDP.endPacket returned an error"));
return 1; // problem
}

12
wled00/usermods_list.cpp
View File

@ -46,10 +46,18 @@
#include "../usermods/BME280_v2/usermod_bme280.h"
#endif
#ifdef USERMOD_FOUR_LINE_DISPLAY
#include "../usermods/usermod_v2_four_line_display/usermod_v2_four_line_display.h"
#ifdef USE_ALT_DISPlAY
#include "../usermods/usermod_v2_four_line_display_ALT/usermod_v2_four_line_display_ALT.h"
#else
#include "../usermods/usermod_v2_four_line_display/usermod_v2_four_line_display.h"
#endif
#endif
#ifdef USERMOD_ROTARY_ENCODER_UI
#include "../usermods/usermod_v2_rotary_encoder_ui/usermod_v2_rotary_encoder_ui.h"
#ifdef USE_ALT_DISPlAY
#include "../usermods/usermod_v2_rotary_encoder_ui_ALT/usermod_v2_rotary_encoder_ui_ALT.h"
#else
#include "../usermods/usermod_v2_rotary_encoder_ui/usermod_v2_rotary_encoder_ui.h"
#endif
#endif
#ifdef USERMOD_AUTO_SAVE
#include "../usermods/usermod_v2_auto_save/usermod_v2_auto_save.h"

2
wled00/wled.h
View File

@ -8,7 +8,7 @@
*/
// version code in format yymmddb (b = daily build)
#define VERSION 2110061
#define VERSION 2110070
//uncomment this if you have a "my_config.h" file you'd like to use
//#define WLED_USE_MY_CONFIG

6
wled00/xml.cpp
View File

@ -376,10 +376,10 @@ void getSettingsJS(byte subPage, char* dest)
oappend(SET_F("bLimits("));
oappend(itoa(WLED_MAX_BUSSES,nS,10)); oappend(",");
oappend(itoa(MAX_LEDS_PER_BUS,nS,10)); oappend(",");
oappend(itoa(MAX_LED_MEMORY,nS,10));
oappend(itoa(MAX_LED_MEMORY,nS,10)); oappend(",");
oappend(itoa(MAX_LEDS,nS,10));
oappend(SET_F(");"));
sappend('v',SET_F("LC"),ledCount);
sappend('c',SET_F("MS"),autoSegments);
for (uint8_t s=0; s < busses.getNumBusses(); s++) {
@ -397,7 +397,7 @@ void getSettingsJS(byte subPage, char* dest)
uint8_t nPins = bus->getPins(pins);
for (uint8_t i = 0; i < nPins; i++) {
lp[1] = 48+i;
if (pinManager.isPinOk(pins[i]) || bus->getType()<20) sappend('v',lp,pins[i]);
if (pinManager.isPinOk(pins[i]) || bus->getType()>=TYPE_NET_DDP_RGB) sappend('v',lp,pins[i]);
}
sappend('v',lc,bus->getLength());
sappend('v',lt,bus->getType());