Merge pull request #56 from Aircoookie/master

Usermod: Project Cars rpm indicator and shift lights (#759)

usermods/project_cars_shiftlight/readme.md

@@ -0,0 +1,23 @@
+### Shift Light for Project Cars
+
+Turn your WLED lights into a rev light and shift indicator for Project Cars.
+
+It is pretty straight forward to use.
+
+1. Make sure, your WLED device and your PC/console are on the same network and can talk to each other
+
+2. Go to the gameplay settings menu in PCARS and enable UDP. There are 9 numbers you can choose from. This is the refresh rate. The lower the number, the better. But you might run into problems at faster rates.
+
+| Number | Updates/Second |
+| ------ | -------------- |
+| 1      | 60             |
+| 2      | 50             |
+| 3      | 40             |
+| 4      | 30             |
+| 5      | 20             |
+| 6      | 15             |
+| 7      | 10             |
+| 8      | 05             |
+| 9      | 1              |
+
+3. once you enter a race, WLED should automatically shift to PCARS mode. Done.

usermods/project_cars_shiftlight/wled06_usermod.ino

@@ -0,0 +1,96 @@
+/*
+ *          Car rev display and shift indicator for Project Cars
+ *          
+ * This works via the UDP telemetry function. You'll need to enable it in the settings of the game.
+ * I've had good results with settings around 5 (20 fps).
+ * 
+ */
+const uint8_t PCARS_dimcolor = 20;
+WiFiUDP UDP;
+const unsigned int PCARS_localUdpPort = 5606; // local port to listen on
+char PCARS_packet[2048];
+
+char PCARS_tempChar[2]; // Temporary array for u16 conversion
+
+u16 PCARS_RPM;
+u16 PCARS_maxRPM;
+
+long PCARS_lastRead = millis() - 2001;
+float PCARS_rpmRatio;
+
+
+void userSetup()
+{
+  UDP.begin(PCARS_localUdpPort);
+}
+
+void userConnected()
+{
+  // new wifi, who dis?
+}
+
+void userLoop()
+{
+  PCARS_readValues();
+  if (PCARS_lastRead > millis() - 2000) {
+    PCARS_buildcolorbars();
+  }
+}
+
+void PCARS_readValues() {
+
+  int PCARS_packetSize = UDP.parsePacket();
+  if (PCARS_packetSize) {
+    int len = UDP.read(PCARS_packet, PCARS_packetSize);
+    if (len > 0) {
+      PCARS_packet[len] = 0;
+    }
+    if (len == 1367) { // Telemetry packet. Ignoring everything else.
+      PCARS_lastRead = millis();
+
+      arlsLock(realtimeTimeoutMs, REALTIME_MODE_GENERIC);
+      // current RPM
+      memcpy(&PCARS_tempChar, &PCARS_packet[124], 2);
+      PCARS_RPM = (PCARS_tempChar[1] << 8) + PCARS_tempChar[0];
+
+      // max RPM
+      memcpy(&PCARS_tempChar, &PCARS_packet[126], 2);
+      PCARS_maxRPM = (PCARS_tempChar[1] << 8) + PCARS_tempChar[0];
+
+      if (PCARS_maxRPM) {
+        PCARS_rpmRatio = constrain((float)PCARS_RPM / (float)PCARS_maxRPM, 0, 1);
+      } else {
+        PCARS_rpmRatio = 0.0;
+      }
+    }
+  }
+}
+void PCARS_buildcolorbars() {
+  boolean activated = false;
+  float ledratio = 0;
+
+  for (uint16_t i = 0; i < ledCount; i++) {
+    if (PCARS_rpmRatio < .95 || (millis() % 100 > 70 )) {
+
+      ledratio = (float)i / (float)ledCount;
+      if (ledratio < PCARS_rpmRatio) {
+        activated = true;
+      } else {
+        activated = false;
+      }
+      if (ledratio > 0.66) {
+        setRealtimePixel(i, 0, 0, PCARS_dimcolor + ((255 - PCARS_dimcolor)*activated), 0);
+      } else if (ledratio > 0.33) {
+        setRealtimePixel(i, PCARS_dimcolor + ((255 - PCARS_dimcolor)*activated), 0, 0, 0);
+      } else {
+        setRealtimePixel(i, 0, PCARS_dimcolor + ((255 - PCARS_dimcolor)*activated), 0, 0);
+      }
+    }
+    else {
+      setRealtimePixel(i, 0, 0, 0, 0);
+
+    }
+  }
+  colorUpdated(5);
+  strip.show();
+}