diff --git a/wled00/data/index-min.htm b/wled00/data/index-min.htm index 0db0064e..db63dba1 100644 --- a/wled00/data/index-min.htm +++ b/wled00/data/index-min.htm @@ -2,61 +2,39 @@ WLED 0.4p - - + + Loading... - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +//Linearicons.com/free + + + + + + + + + + + + +
- - - - - - - + + + + + + +
-
+
@@ -66,18 +44,41 @@
-
-
+
+
- - - - -
+Effect Panel

+ + + + +


+Set secondary color to + + + + + +
+
Custom Theater Chase
+using primary and + secondary color LEDs,
+doing steps per tick, +from start and end. +
+
+
+Favorite Presets

+ + + + +


+Click checkmark to apply brightness, color and effects.

diff --git a/wled00/data/index.htm b/wled00/data/index.htm index 71b13f26..339d037f 100644 --- a/wled00/data/index.htm +++ b/wled00/data/index.htm @@ -3,38 +3,38 @@ WLED 0.4p @@ -28,23 +31,23 @@ Network SSID (leave empty to not connect):

Network password:

Static IP (leave at 0.0.0.0 for DHCP):
- . - . - . -
+ . + . + . +
Static gateway:
- . - . - . -
+ . + . + . +
Static subnet mask:
- . - . - . -
+ . + . + . +
mDNS address (leave empty for no mDNS):
http:// .local
- Try connecting before opening AP for: s
+ Try connecting before opening AP for: s
Client IP: Not connected

Configure Access Point

AP SSID (leave empty for no AP):

@@ -58,20 +61,21 @@ Server description:
Use HSB sliders instead of RGB by default:

LED setup

- LED count (max. 255):
+ LED count (max. 255):
+ The default boot color is saved in preset slot 0.
Default RGB color: - - -
- Default brightness: (0-255)
- Default white value (only RGBW, -1 to disable):
- Default effect ID:
- Default effect speed:
+ + +
+ Default brightness: (0-255)
+ Default white value (only RGBW, -1 to disable):
+ Default effect ID:
+ Default effect speed:
Ignore and use current color, brightness and effects:
Turn on after power up/reset:
Use Gamma correction for brightness:
Use Gamma correction for color:
- Brightness factor: %
+ Brightness factor: %

Button setup

On/Off button enabled:

Transitions

@@ -79,8 +83,8 @@ Sweep: Invert direction:
Transition Delay: ms

Timed light

- Target brightness: (0-255)
- Change after: min
+ Target brightness: (0-255)
+ Change after: min
Fade:

Broadcast

UDP Port:
@@ -96,8 +100,8 @@ Get time from NTP server:
Current local time is unknown

Advanced

- Default overlay ID:
- WARLS offset: negative
+ Default overlay ID:
+ WARLS offset: negative

Security

OTA locked:
Passphrase:
@@ -115,12 +119,13 @@

About

WLED version 0.4p
(c) 2016-2017 Christian Schwinne
- Licensed under the MIT license
+ Licensed under the MIT license

Uses libraries:
ESP8266 Arduino Core
WS2812FX by kitesurfer1404 (Aircoookie fork)
Timezone library by JChristensen
- arduino-esp8266-alexa-multiple-wemo-switch by kakopappa
+ arduino-esp8266-alexa-multiple-wemo-switch by kakopappa

+ UI icons by Linearicons created by Perxis! (CC-BY-SA 4.0)

Server message: XML response error!

diff --git a/wled00/htmls00.h b/wled00/htmls00.h index fa135267..6e55bb2b 100644 --- a/wled00/htmls00.h +++ b/wled00/htmls00.h @@ -20,66 +20,53 @@ const char favicon[156] PROGMEM = { /* * Index html */ -const char PAGE_index[] PROGMEM = R"=====( +//head +const char PAGE_index0[] PROGMEM = R"=====( WLED 0.4p - - + + +)====="; + +//body1 (svg defs) +const char PAGE_index1[] PROGMEM = R"=====( Loading... - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +//Linearicons.com/free + + + + + + + + + + + + + +)====="; + +//body2 (html) +const char PAGE_index2[] PROGMEM = R"=====(
- - - - - - - + + + + + + +
- +
@@ -96,11 +83,34 @@ const char PAGE_index[] PROGMEM = R"=====(
- - - - -
+Effect Panel

+ + + + +


+Set secondary color to + + + + + +
+
Custom Theater Chase
+using primary and + secondary color LEDs,
+doing steps per tick, +from start and end. +
+
+
+Favorite Presets

+ + + + +


+Click checkmark to apply brightness, color and effects.

diff --git a/wled00/htmls01.h b/wled00/htmls01.h index 5680f564..3a3719f6 100644 --- a/wled00/htmls01.h +++ b/wled00/htmls01.h @@ -13,113 +13,120 @@ var d=document; const char PAGE_settings1[] PROGMEM = R"=====( } - + - -

WLED Settings

- -
+ +

WLED Settings

+ +

WiFi setup

Connect to existing network

-Network SSID (leave empty to not connect):

-Network password:

+Network SSID (leave empty to not connect):

+Network password:

Static IP (leave at 0.0.0.0 for DHCP):
- . - . - . -
+ . + . + . +
Static gateway:
- . - . - . -
+ . + . + . +
Static subnet mask:
- . - . - . -
+ . + . + . +
mDNS address (leave empty for no mDNS):
-http:// .local
-Try connecting before opening AP for: s
-Client IP: Not connected
+http:// .local
+Try connecting before opening AP for: s
+Client IP: Not connected

Configure Access Point

-AP SSID (leave empty for no AP):

-Hide AP SSID:
-AP password (leave empty for open):

-AP channel:
-AP IP: Not active
+AP SSID (leave empty for no AP):

+Hide AP SSID:
+AP password (leave empty for open):

+AP channel:
+AP IP: Not active

Application setup

Web setup

-Server description:
-Use HSB sliders instead of RGB by default:
+Server description:
+Use HSB sliders instead of RGB by default:

LED setup

-LED count (max. 255):
+LED count (max. 255):
+The default boot color is saved in preset slot 0.
Default RGB color: - - -
-Default brightness: (0-255)
-Default white value (only RGBW, -1 to disable):
-Default effect ID:
-Default effect speed:
-Ignore and use current color, brightness and effects:
-Turn on after power up/reset:
-Use Gamma correction for brightness:
-Use Gamma correction for color:
-Brightness factor: %
+ + +
+Default brightness: (0-255)
+Default white value (only RGBW, -1 to disable):
+Default effect ID:
+Default effect speed:
+Ignore and use current color, brightness and effects:
+Turn on after power up/reset:
+Use Gamma correction for brightness:
+Use Gamma correction for color:
+Brightness factor: %

Button setup

-On/Off button enabled:
+On/Off button enabled:

Transitions

-Fade:
-Sweep: Invert direction:
-Transition Delay: ms
+Fade:
+Sweep: Invert direction:
+Transition Delay: ms

Timed light

-Target brightness: (0-255)
-Change after: min
-Fade:
+Target brightness: (0-255)
+Change after: min
+Fade:

Broadcast

-UDP Port:
-Receive notifications:
-Send notifications on direct change:
-Send notifications on button press:
+UDP Port:
+Receive notifications:
+Send notifications on direct change:
+Send notifications on button press:

Interfaces

-Emulate Alexa device:
-Alexa invocation name:
-Send Alexa notifications:
+Emulate Alexa device:
+Alexa invocation name:
+Send Alexa notifications:

Time (experimental!)

NTP was updated but still causes crashes. Requires reboot.
-Get time from NTP server:
-Current local time is unknown
+Get time from NTP server:
+Current local time is unknown

Advanced

-Default overlay ID:
-WARLS offset: negative
+Default overlay ID:
+WARLS offset: negative

Security

-OTA locked:
-Passphrase:
+OTA locked:
+Passphrase:
To enable OTA, for security reasons you need to also enter the correct password!
The password may/should be changed when OTA is enabled.
Disable OTA when not in use, otherwise an attacker could reflash device software!

-Disable recovery AP:
+Disable recovery AP:
In case of a connection error there will be no wireless recovery possible!
Completely disables all Access Point functions.
Setting only changable if OTA is enabled!

-Factory reset:
+Factory reset:
All EEPROM content (settings) will be erased.

HTTP traffic is not encrypted. An attacker in the same network could intercept form data!

About

WLED version 0.4p
(c) 2016-2017 Christian Schwinne
-Licensed under the MIT license
+Licensed under the MIT license

Uses libraries:
ESP8266 Arduino Core
WS2812FX by kitesurfer1404 (Aircoookie fork)
Timezone library by JChristensen
-arduino-esp8266-alexa-multiple-wemo-switch by kakopappa
-Server message: XML response error! +arduino-esp8266-alexa-multiple-wemo-switch by kakopappa

+UI icons by Linearicons created by Perxis! (CC-BY-SA 4.0)

+Server message: XML response error!

-
+
diff --git a/wled00/wled00.ino b/wled00/wled00.ino index d99f344c..3f8d7f77 100644 --- a/wled00/wled00.ino +++ b/wled00/wled00.ino @@ -20,7 +20,7 @@ #include "CallbackFunction.h" //version in format yymmddb (b = daily build) -#define VERSION 1712022 +#define VERSION 1712090 //If you have an RGBW strip, uncomment first line in WS2812FX.h! @@ -31,7 +31,7 @@ //#define USEFS //overlays, needed for clocks etc. -#define USEOVERLAYS +//#define USEOVERLAYS #ifdef USEFS #include diff --git a/wled00/wled05_init.ino b/wled00/wled05_init.ino index 9ab9d82a..5d5ff105 100644 --- a/wled00/wled05_init.ino +++ b/wled00/wled05_init.ino @@ -82,7 +82,13 @@ void wledInit() if(!handleFileRead("/favicon.ico")) server.send(200, "image/x-icon", favicon); }); server.on("/", HTTP_GET, [](){ - if(!handleFileRead("/index.htm")) server.send(200, "text/html", PAGE_index); + if(!handleFileRead("/index.htm")) { + server.setContentLength(strlen_P(PAGE_index0) + strlen_P(PAGE_index1) + strlen_P(PAGE_index2)); + server.send(200, "text/html", ""); + server.sendContent_P(PAGE_index0); + server.sendContent_P(PAGE_index1); + server.sendContent_P(PAGE_index2); + } }); server.on("/reset", HTTP_GET, [](){ server.send(200, "text/plain", "Rebooting...");