Less operations and better readable

This commit is contained in:
Erwin Repolust 2023-03-08 03:54:48 +01:00
parent 81e70925c4
commit e00e778bce

View File

@ -126,8 +126,8 @@ class UsermodBattery : public Usermod
if (pinManager.allocatePin(batteryPin, false, PinOwner::UM_Battery)) {
DEBUG_PRINTLN(F("Battery pin allocation succeeded."));
success = true;
//initialize voltage again with analog read as that will give us faster precision
voltage = (analogReadMilliVolts(batteryPin) / 1000.0f + calibration / 2.0f) * 2.0f;
//initialize voltage with analog read
voltage = analogReadMilliVolts(batteryPin) / 500.0f + calibration;
}
if (!success) {
@ -179,12 +179,10 @@ class UsermodBattery : public Usermod
initializing = false;
#ifdef ARDUINO_ARCH_ESP32
// use calibrated millivolts analogread on esp32 (150 mV ~ 2450 mV)
rawValue = analogReadMilliVolts(batteryPin) / 1000.0f + calibration / 2.0f;
// calculate the voltage with a 1/20th weighted running average
voltage = ((voltage / 2.0f) * 19.0f + rawValue) / 20.0f;
// usually a voltage divider (50%) is used on ESP32, so we need to multiply by 2
voltage *= 2.0f;
// use calibrated millivolts analogread on esp32 (150 mV ~ 2450 mV) and divide by 500 to fix to the right decimal place and multiply by 2 to account for the voltage divider
rawValue = analogReadMilliVolts(batteryPin) / 500.0f + calibration;
// calculate the voltage with a weighted running average because ADC in ESP32 is fluctuating too much for a good single readout
voltage = (voltage * 19.0f + rawValue) / 20.0f;
#else
// read battery raw input
rawValue = analogRead(batteryPin);
@ -192,7 +190,7 @@ class UsermodBattery : public Usermod
// calculate the voltage
voltage = ((rawValue / getAdcPrecision()) * maxBatteryVoltage) + calibration;
#endif
// check if voltage is within specified voltage range, allow 10% over/under voltage
// check if voltage is within specified voltage range, allow 10% over/under voltage - removed cause this just makes it hard for people to troubleshoot as the voltage in the web gui will say invalid instead of displaying a voltage
//voltage = ((voltage < minBatteryVoltage * 0.85f) || (voltage > maxBatteryVoltage * 1.1f)) ? -1.0f : voltage;
// translate battery voltage into percentage