Added BME280 sensor (#850)

* Added support for H803FW controller

* Create usermod_bme280.cpp

* Create usermod_bme280.cpp

* Added BME280 sensor

* Update readme.md

* Update usermod_bme280.cpp
This commit is contained in:
srg74 2020-04-15 17:52:10 -04:00 committed by GitHub
parent f90ab46794
commit ec10c29aca
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
5 changed files with 599 additions and 16 deletions

View File

@ -156,6 +156,8 @@ lib_deps =
#For Dallas sensor uncomment following 2 lines #For Dallas sensor uncomment following 2 lines
DallasTemperature@~3.8.0 DallasTemperature@~3.8.0
OneWire@~2.3.5 OneWire@~2.3.5
#For BME280 sensor uncomment following
#BME280@~3.0.0
lib_ignore = lib_ignore =
AsyncTCP AsyncTCP

View File

@ -1,36 +1,39 @@
# Almost universal controller board for outdoor applications # Almost universal controller board for outdoor applications
This usermod is using ideas from @mrVanboy and @400killer This usermod is using ideas from @mrVanboy and @400killer
Installation of file: Copy and replace file in wled00 directory Installation of file: Copy and replace file in wled00 directory.
For BME280 sensor use usermod_bme280.cpp. Copy to wled00 and rename to usermod.cpp
## Project repository ## Project repository
- [Original repository](https://github.com/srg74/Controller-for-WLED-firmware) - Main controller repository - [Original repository](https://github.com/srg74/Controller-for-WLED-firmware) - Main controller repository
## Features ## Features
* SSD1306 128x32 and 128x64 I2C OLED display - SSD1306 128x32 and 128x64 I2C OLED display
* On screen IP address, SSID and controller status (e.g. ON or OFF, recent effect) - On screen IP address, SSID and controller status (e.g. ON or OFF, recent effect)
* Auto display shutoff for saving display lifetime - Auto display shutoff for saving display lifetime
* Dallas temperature sensor - Dallas temperature sensor
* Reporting temperature to MQTT broker - Reporting temperature to MQTT broker
## Hardware ## Hardware
![Hardware connection](assets/controller.jpg) ![Hardware connection](assets/controller.jpg)
## Functionality checked with ## Functionality checked with
* ESP-07S - ESP-07S
* PlatformIO - PlatformIO
* SSD1306 128x32 I2C OLED display - SSD1306 128x32 I2C OLED display
* DS18B20 (temperature sensor) - DS18B20 (temperature sensor)
* KY-022 (infrared receiver) - BME280 (temperature, humidity and pressure sensor)
* Push button (N.O. momentary switch) - KY-022 (infrared receiver)
- Push button (N.O. momentary switch)
### Platformio requirements For Dallas sensor uncomment `U8g2@~2.27.3`,`DallasTemperature@~3.8.0`,`OneWire@~2.3.5 under` `[common]` section in `platformio.ini`:
Uncomment `U8g2@~2.27.3`,`DallasTemperature@~3.8.0`,`OneWire@~2.3.5 under` `[common]` section in `platformio.ini`:
```ini ```ini
# platformio.ini # platformio.ini
... ...
[platformio] [platformio]
... ...
; default_envs = esp01_1m_full
default_envs = esp07 default_envs = esp07
; default_envs = d1_mini
... ...
[common] [common]
... ...
@ -43,3 +46,23 @@ lib_deps_external =
OneWire@~2.3.5 OneWire@~2.3.5
... ...
``` ```
For BME280 sensor uncomment `U8g2@~2.27.3`,`BME280@~3.0.0 under` `[common]` section in `platformio.ini`:
```ini
# platformio.ini
...
[platformio]
...
default_envs = esp07
; default_envs = d1_mini
...
[common]
...
lib_deps_external =
...
#For use SSD1306 OLED display uncomment following
U8g2@~2.27.3
#For BME280 sensor uncomment following
BME280@~3.0.0
...
```

View File

@ -0,0 +1,266 @@
#include "wled.h"
#include <Arduino.h>
#include <U8x8lib.h> // from https://github.com/olikraus/u8g2/
#include <Wire.h>
#include <BME280I2C.h> //BME280 sensor
void UpdateBME280Data();
#define Celsius // Show temperature mesaurement in Celcius otherwise is in Fahrenheit
BME280I2C bme; // Default : forced mode, standby time = 1000 ms
// Oversampling = pressure ×1, temperature ×1, humidity ×1, filter off,
#ifdef ARDUINO_ARCH_ESP32 //ESP32 boards
uint8_t SCL_PIN = 22;
uint8_t SDA_PIN = 21;
#else //ESP8266 boards
uint8_t SCL_PIN = 5;
uint8_t SDA_PIN = 4;
// uint8_t RST_PIN = 16; // Uncoment for Heltec WiFi-Kit-8
#endif
//The SCL and SDA pins are defined here.
//ESP8266 Wemos D1 mini board use SCL=5 SDA=4 while ESP32 Wemos32 mini board use SCL=22 SDA=21
#define U8X8_PIN_SCL SCL_PIN
#define U8X8_PIN_SDA SDA_PIN
//#define U8X8_PIN_RESET RST_PIN // Uncoment for Heltec WiFi-Kit-8
// If display does not work or looks corrupted check the
// constructor reference:
// https://github.com/olikraus/u8g2/wiki/u8x8setupcpp
// or check the gallery:
// https://github.com/olikraus/u8g2/wiki/gallery
// --> First choise of cheap I2C OLED 128X32 0.91"
U8X8_SSD1306_128X32_UNIVISION_HW_I2C u8x8(U8X8_PIN_NONE, U8X8_PIN_SCL, U8X8_PIN_SDA); // Pins are Reset, SCL, SDA
// --> Second choise of cheap I2C OLED 128X64 0.96" or 1.3"
//U8X8_SSD1306_128X64_NONAME_HW_I2C u8x8(U8X8_PIN_NONE, U8X8_PIN_SCL, U8X8_PIN_SDA); // Pins are Reset, SCL, SDA
// --> Third choise of Heltec WiFi-Kit-8 OLED 128X32 0.91"
//U8X8_SSD1306_128X32_UNIVISION_HW_I2C u8x8(U8X8_PIN_RESET, U8X8_PIN_SCL, U8X8_PIN_SDA); // Constructor for Heltec WiFi-Kit-8
// gets called once at boot. Do all initialization that doesn't depend on network here
// BME280 sensor timer
long tempTimer = millis();
long lastMeasure = 0;
float SensorPressure(NAN);
float SensorTemperature(NAN);
float SensorHumidity(NAN);
void userSetup() {
u8x8.begin();
u8x8.setPowerSave(0);
u8x8.setFlipMode(1);
u8x8.setContrast(10); //Contrast setup will help to preserve OLED lifetime. In case OLED need to be brighter increase number up to 255
u8x8.setFont(u8x8_font_chroma48medium8_r);
u8x8.drawString(0, 0, "Loading...");
Wire.begin(SDA_PIN,SCL_PIN);
while(!bme.begin())
{
Serial.println("Could not find BME280I2C sensor!");
delay(1000);
}
switch(bme.chipModel())
{
case BME280::ChipModel_BME280:
Serial.println("Found BME280 sensor! Success.");
break;
case BME280::ChipModel_BMP280:
Serial.println("Found BMP280 sensor! No Humidity available.");
break;
default:
Serial.println("Found UNKNOWN sensor! Error!");
}
}
// gets called every time WiFi is (re-)connected. Initialize own network
// interfaces here
void userConnected() {}
// needRedraw marks if redraw is required to prevent often redrawing.
bool needRedraw = true;
// Next variables hold the previous known values to determine if redraw is
// required.
String knownSsid = "";
IPAddress knownIp;
uint8_t knownBrightness = 0;
uint8_t knownMode = 0;
uint8_t knownPalette = 0;
long lastUpdate = 0;
long lastRedraw = 0;
bool displayTurnedOff = false;
// How often we are redrawing screen
#define USER_LOOP_REFRESH_RATE_MS 5000
void userLoop() {
// BME280 sensor MQTT publishing
tempTimer = millis();
// Timer to publish new sensor data every 60 seconds
if (tempTimer - lastMeasure > 60000)
{
lastMeasure = tempTimer;
// Check if MQTT Connected, otherwise it will crash the 8266
if (mqtt != nullptr)
{
UpdateBME280Data();
float board_temperature = SensorTemperature;
float board_pressure = SensorPressure;
float board_humidity = SensorHumidity;
// Create string populated with user defined device topic from the UI, and the read temperature, humidity and pressure. Then publish to MQTT server.
String t = String(mqttDeviceTopic);
t += "/temperature";
mqtt->publish(t.c_str(), 0, true, String(board_temperature).c_str());
String p = String(mqttDeviceTopic);
p += "/pressure";
mqtt->publish(p.c_str(), 0, true, String(board_pressure).c_str());
String h = String(mqttDeviceTopic);
h += "/humidity";
mqtt->publish(h.c_str(), 0, true, String(board_humidity).c_str());
}
}
// Check if we time interval for redrawing passes.
if (millis() - lastUpdate < USER_LOOP_REFRESH_RATE_MS) {
return;
}
lastUpdate = millis();
// Turn off display after 3 minutes with no change.
if(!displayTurnedOff && millis() - lastRedraw > 3*60*1000) {
u8x8.setPowerSave(1);
displayTurnedOff = true;
}
// Check if values which are shown on display changed from the last time.
if (((apActive) ? String(apSSID) : WiFi.SSID()) != knownSsid) {
needRedraw = true;
} else if (knownIp != (apActive ? IPAddress(4, 3, 2, 1) : WiFi.localIP())) {
needRedraw = true;
} else if (knownBrightness != bri) {
needRedraw = true;
} else if (knownMode != strip.getMode()) {
needRedraw = true;
} else if (knownPalette != strip.getSegment(0).palette) {
needRedraw = true;
}
if (!needRedraw) {
return;
}
needRedraw = false;
if (displayTurnedOff)
{
u8x8.setPowerSave(0);
displayTurnedOff = false;
}
lastRedraw = millis();
// Update last known values.
#if defined(ESP8266)
knownSsid = apActive ? WiFi.softAPSSID() : WiFi.SSID();
#else
knownSsid = WiFi.SSID();
#endif
knownIp = apActive ? IPAddress(4, 3, 2, 1) : WiFi.localIP();
knownBrightness = bri;
knownMode = strip.getMode();
knownPalette = strip.getSegment(0).palette;
u8x8.clear();
u8x8.setFont(u8x8_font_chroma48medium8_r);
// First row with Wifi name
u8x8.setCursor(1, 0);
u8x8.print(knownSsid.substring(0, u8x8.getCols() > 1 ? u8x8.getCols() - 2 : 0));
// Print `~` char to indicate that SSID is longer, than owr dicplay
if (knownSsid.length() > u8x8.getCols())
u8x8.print("~");
// Second row with IP or Psssword
u8x8.setCursor(1, 1);
// Print password in AP mode and if led is OFF.
if (apActive && bri == 0)
u8x8.print(apPass);
else
u8x8.print(knownIp);
// Third row with mode name
u8x8.setCursor(2, 2);
uint8_t qComma = 0;
bool insideQuotes = false;
uint8_t printedChars = 0;
char singleJsonSymbol;
// Find the mode name in JSON
for (size_t i = 0; i < strlen_P(JSON_mode_names); i++) {
singleJsonSymbol = pgm_read_byte_near(JSON_mode_names + i);
switch (singleJsonSymbol) {
case '"':
insideQuotes = !insideQuotes;
break;
case '[':
case ']':
break;
case ',':
qComma++;
default:
if (!insideQuotes || (qComma != knownMode))
break;
u8x8.print(singleJsonSymbol);
printedChars++;
}
if ((qComma > knownMode) || (printedChars > u8x8.getCols() - 2))
break;
}
// Fourth row with palette name
u8x8.setCursor(2, 3);
qComma = 0;
insideQuotes = false;
printedChars = 0;
// Looking for palette name in JSON.
for (size_t i = 0; i < strlen_P(JSON_palette_names); i++) {
singleJsonSymbol = pgm_read_byte_near(JSON_palette_names + i);
switch (singleJsonSymbol) {
case '"':
insideQuotes = !insideQuotes;
break;
case '[':
case ']':
break;
case ',':
qComma++;
default:
if (!insideQuotes || (qComma != knownPalette))
break;
u8x8.print(singleJsonSymbol);
printedChars++;
}
if ((qComma > knownMode) || (printedChars > u8x8.getCols() - 2))
break;
}
u8x8.setFont(u8x8_font_open_iconic_embedded_1x1);
u8x8.drawGlyph(0, 0, 80); // wifi icon
u8x8.drawGlyph(0, 1, 68); // home icon
u8x8.setFont(u8x8_font_open_iconic_weather_2x2);
u8x8.drawGlyph(0, 2, 66 + (bri > 0 ? 3 : 0)); // sun/moon icon
}
void UpdateBME280Data() {
float temp(NAN), hum(NAN), pres(NAN);
#ifdef Celsius
BME280::TempUnit tempUnit(BME280::TempUnit_Celsius);
#else
BME280::TempUnit tempUnit(BME280::TempUnit_Fahrenheit);
#endif
BME280::PresUnit presUnit(BME280::PresUnit_Pa);
bme.read(pres, temp, hum, tempUnit, presUnit);
SensorTemperature=temp;
SensorHumidity=hum;
SensorPressure=pres;
}

View File

@ -1,5 +1,6 @@
# Wemos D1 mini and Wemos32 mini shield # Wemos D1 mini and Wemos32 mini shield
- Installation of file: Copy and replace file in wled00 directory - Installation of file: Copy and replace file in wled00 directory
- For BME280 sensor use usermod_bme280.cpp. Copy to wled00 and rename to usermod.cpp
- Added third choice of controller Heltec WiFi-Kit-8. Totally DIY but with OLED display. - Added third choice of controller Heltec WiFi-Kit-8. Totally DIY but with OLED display.
## Project repository ## Project repository
- [Original repository](https://github.com/srg74/WLED-wemos-shield) - WLED Wemos shield repository - [Original repository](https://github.com/srg74/WLED-wemos-shield) - WLED Wemos shield repository
@ -17,15 +18,18 @@
![Shield](https://github.com/srg74/WLED-wemos-shield/blob/master/resources/Images/Assembly_8.jpg) ![Shield](https://github.com/srg74/WLED-wemos-shield/blob/master/resources/Images/Assembly_8.jpg)
## Functionality checked with ## Functionality checked with
- Wemos D1 mini original v3.1 and clones - Wemos D1 mini original v3.1 and clones
- Wemos32 mini - Wemos32 mini
- PlatformIO - PlatformIO
- SSD1306 128x32 I2C OLED display - SSD1306 128x32 I2C OLED display
- DS18B20 (temperature sensor) - DS18B20 (temperature sensor)
- BME280 (temperature, humidity and pressure sensor)
- Push button (N.O. momentary switch) - Push button (N.O. momentary switch)
### Platformio requirements ### Platformio requirements
Uncomment `U8g2@~2.27.3`,`DallasTemperature@~3.8.0`,`OneWire@~2.3.5 under` `[common]` section in `platformio.ini`:
For Dallas sensor uncomment `U8g2@~2.27.3`,`DallasTemperature@~3.8.0`,`OneWire@~2.3.5 under` `[common]` section in `platformio.ini`:
```ini ```ini
# platformio.ini # platformio.ini
... ...
@ -45,3 +49,23 @@ lib_deps_external =
OneWire@~2.3.5 OneWire@~2.3.5
... ...
``` ```
For BME280 sensor uncomment `U8g2@~2.27.3`,`BME280@~3.0.0 under` `[common]` section in `platformio.ini`:
```ini
# platformio.ini
...
[platformio]
...
; default_envs = esp07
default_envs = d1_mini
...
[common]
...
lib_deps_external =
...
#For use SSD1306 OLED display uncomment following
U8g2@~2.27.3
#For BME280 sensor uncomment following
BME280@~3.0.0
...
```

View File

@ -0,0 +1,268 @@
#include "wled.h"
#include <Arduino.h>
#include <U8x8lib.h> // from https://github.com/olikraus/u8g2/
#include <Wire.h>
#include <BME280I2C.h> //BME280 sensor
void UpdateBME280Data();
#define Celsius // Show temperature mesaurement in Celcius otherwise is in Fahrenheit
BME280I2C bme; // Default : forced mode, standby time = 1000 ms
// Oversampling = pressure ×1, temperature ×1, humidity ×1, filter off,
#ifdef ARDUINO_ARCH_ESP32 //ESP32 boards
uint8_t SCL_PIN = 22;
uint8_t SDA_PIN = 21;
#else //ESP8266 boards
uint8_t SCL_PIN = 5;
uint8_t SDA_PIN = 4;
// uint8_t RST_PIN = 16; // Uncoment for Heltec WiFi-Kit-8
#endif
//The SCL and SDA pins are defined here.
//ESP8266 Wemos D1 mini board use SCL=5 SDA=4 while ESP32 Wemos32 mini board use SCL=22 SDA=21
#define U8X8_PIN_SCL SCL_PIN
#define U8X8_PIN_SDA SDA_PIN
//#define U8X8_PIN_RESET RST_PIN // Uncoment for Heltec WiFi-Kit-8
// If display does not work or looks corrupted check the
// constructor reference:
// https://github.com/olikraus/u8g2/wiki/u8x8setupcpp
// or check the gallery:
// https://github.com/olikraus/u8g2/wiki/gallery
// --> First choise of cheap I2C OLED 128X32 0.91"
U8X8_SSD1306_128X32_UNIVISION_HW_I2C u8x8(U8X8_PIN_NONE, U8X8_PIN_SCL, U8X8_PIN_SDA); // Pins are Reset, SCL, SDA
// --> Second choise of cheap I2C OLED 128X64 0.96" or 1.3"
//U8X8_SSD1306_128X64_NONAME_HW_I2C u8x8(U8X8_PIN_NONE, U8X8_PIN_SCL, U8X8_PIN_SDA); // Pins are Reset, SCL, SDA
// --> Third choise of Heltec WiFi-Kit-8 OLED 128X32 0.91"
//U8X8_SSD1306_128X32_UNIVISION_HW_I2C u8x8(U8X8_PIN_RESET, U8X8_PIN_SCL, U8X8_PIN_SDA); // Constructor for Heltec WiFi-Kit-8
// gets called once at boot. Do all initialization that doesn't depend on network here
// BME280 sensor timer
long tempTimer = millis();
long lastMeasure = 0;
float SensorPressure(NAN);
float SensorTemperature(NAN);
float SensorHumidity(NAN);
void userSetup() {
u8x8.begin();
u8x8.setPowerSave(0);
u8x8.setFlipMode(1);
u8x8.setContrast(10); //Contrast setup will help to preserve OLED lifetime. In case OLED need to be brighter increase number up to 255
u8x8.setFont(u8x8_font_chroma48medium8_r);
u8x8.drawString(0, 0, "Loading...");
Wire.begin(SDA_PIN,SCL_PIN);
while(!bme.begin())
{
Serial.println("Could not find BME280I2C sensor!");
delay(1000);
}
switch(bme.chipModel())
{
case BME280::ChipModel_BME280:
Serial.println("Found BME280 sensor! Success.");
break;
case BME280::ChipModel_BMP280:
Serial.println("Found BMP280 sensor! No Humidity available.");
break;
default:
Serial.println("Found UNKNOWN sensor! Error!");
}
}
// gets called every time WiFi is (re-)connected. Initialize own network
// interfaces here
void userConnected() {}
// needRedraw marks if redraw is required to prevent often redrawing.
bool needRedraw = true;
// Next variables hold the previous known values to determine if redraw is
// required.
String knownSsid = "";
IPAddress knownIp;
uint8_t knownBrightness = 0;
uint8_t knownMode = 0;
uint8_t knownPalette = 0;
long lastUpdate = 0;
long lastRedraw = 0;
bool displayTurnedOff = false;
// How often we are redrawing screen
#define USER_LOOP_REFRESH_RATE_MS 5000
void userLoop() {
// BME280 sensor MQTT publishing
tempTimer = millis();
// Timer to publish new sensor data every 60 seconds
if (tempTimer - lastMeasure > 60000)
{
lastMeasure = tempTimer;
// Check if MQTT Connected, otherwise it will crash the 8266
if (mqtt != nullptr)
{
UpdateBME280Data();
float board_temperature = SensorTemperature;
float board_pressure = SensorPressure;
float board_humidity = SensorHumidity;
// Create string populated with user defined device topic from the UI, and the read temperature, humidity and pressure. Then publish to MQTT server.
String t = String(mqttDeviceTopic);
t += "/temperature";
mqtt->publish(t.c_str(), 0, true, String(board_temperature).c_str());
String p = String(mqttDeviceTopic);
p += "/pressure";
mqtt->publish(p.c_str(), 0, true, String(board_pressure).c_str());
String h = String(mqttDeviceTopic);
h += "/humidity";
mqtt->publish(h.c_str(), 0, true, String(board_humidity).c_str());
}
}
// Check if we time interval for redrawing passes.
if (millis() - lastUpdate < USER_LOOP_REFRESH_RATE_MS) {
return;
}
lastUpdate = millis();
// Turn off display after 3 minutes with no change.
if(!displayTurnedOff && millis() - lastRedraw > 3*60*1000) {
u8x8.setPowerSave(1);
displayTurnedOff = true;
}
// Check if values which are shown on display changed from the last time.
if (((apActive) ? String(apSSID) : WiFi.SSID()) != knownSsid) {
needRedraw = true;
} else if (knownIp != (apActive ? IPAddress(4, 3, 2, 1) : WiFi.localIP())) {
needRedraw = true;
} else if (knownBrightness != bri) {
needRedraw = true;
} else if (knownMode != strip.getMode()) {
needRedraw = true;
} else if (knownPalette != strip.getSegment(0).palette) {
needRedraw = true;
}
if (!needRedraw) {
return;
}
needRedraw = false;
if (displayTurnedOff)
{
u8x8.setPowerSave(0);
displayTurnedOff = false;
}
lastRedraw = millis();
// Update last known values.
#if defined(ESP8266)
knownSsid = apActive ? WiFi.softAPSSID() : WiFi.SSID();
#else
knownSsid = WiFi.SSID();
#endif
knownIp = apActive ? IPAddress(4, 3, 2, 1) : WiFi.localIP();
knownBrightness = bri;
knownMode = strip.getMode();
knownPalette = strip.getSegment(0).palette;
u8x8.clear();
u8x8.setFont(u8x8_font_chroma48medium8_r);
// First row with Wifi name
u8x8.setCursor(1, 0);
u8x8.print(knownSsid.substring(0, u8x8.getCols() > 1 ? u8x8.getCols() - 2 : 0));
// Print `~` char to indicate that SSID is longer, than owr dicplay
if (knownSsid.length() > u8x8.getCols())
u8x8.print("~");
// Second row with IP or Psssword
u8x8.setCursor(1, 1);
// Print password in AP mode and if led is OFF.
if (apActive && bri == 0)
u8x8.print(apPass);
else
u8x8.print(knownIp);
// Third row with mode name
u8x8.setCursor(2, 2);
uint8_t qComma = 0;
bool insideQuotes = false;
uint8_t printedChars = 0;
char singleJsonSymbol;
// Find the mode name in JSON
for (size_t i = 0; i < strlen_P(JSON_mode_names); i++) {
singleJsonSymbol = pgm_read_byte_near(JSON_mode_names + i);
switch (singleJsonSymbol) {
case '"':
insideQuotes = !insideQuotes;
break;
case '[':
case ']':
break;
case ',':
qComma++;
default:
if (!insideQuotes || (qComma != knownMode))
break;
u8x8.print(singleJsonSymbol);
printedChars++;
}
if ((qComma > knownMode) || (printedChars > u8x8.getCols() - 2))
break;
}
// Fourth row with palette name
u8x8.setCursor(2, 3);
qComma = 0;
insideQuotes = false;
printedChars = 0;
// Looking for palette name in JSON.
for (size_t i = 0; i < strlen_P(JSON_palette_names); i++) {
singleJsonSymbol = pgm_read_byte_near(JSON_palette_names + i);
switch (singleJsonSymbol) {
case '"':
insideQuotes = !insideQuotes;
break;
case '[':
case ']':
break;
case ',':
qComma++;
default:
if (!insideQuotes || (qComma != knownPalette))
break;
u8x8.print(singleJsonSymbol);
printedChars++;
}
if ((qComma > knownMode) || (printedChars > u8x8.getCols() - 2))
break;
}
u8x8.setFont(u8x8_font_open_iconic_embedded_1x1);
u8x8.drawGlyph(0, 0, 80); // wifi icon
u8x8.drawGlyph(0, 1, 68); // home icon
u8x8.setFont(u8x8_font_open_iconic_weather_2x2);
u8x8.drawGlyph(0, 2, 66 + (bri > 0 ? 3 : 0)); // sun/moon icon
}
void UpdateBME280Data() {
float temp(NAN), hum(NAN), pres(NAN);
#ifdef Celsius
BME280::TempUnit tempUnit(BME280::TempUnit_Celsius);
BME280::PresUnit presUnit(BME280::PresUnit_Pa);
bme.read(pres, temp, hum, tempUnit, presUnit);
#else
BME280::TempUnit tempUnit(BME280::TempUnit_Fahrenheit);
BME280::PresUnit presUnit(BME280::PresUnit_Pa);
bme.read(pres, temp, hum, tempUnit, presUnit);
#endif
SensorTemperature=temp;
SensorHumidity=hum;
SensorPressure=pres;
}