Commit Graph

2708 Commits

Author SHA1 Message Date
Frank
42b247756a blur speedup
it seems that SEGMENT.blur() is the main bottleneck for many 2D effects.

This change optimizes performance of the function:
* avoid to re-write unchanged pixels
* early exit when blur_amount == 0 (=nothing to do)
* use _fast_ types where possible

I've seen up to 20% speedup with this change.
2023-07-06 19:51:37 +02:00
Frank
fbbf2d5eb3 2DPlasmaball - optimize out float 2023-07-06 19:07:09 +02:00
Frank
788a276616 fix power calculation for NeoPixelBusLg
power estimation results from estimateCurrentAndLimitBri() were too low (example: estimated 1.3Amp, measured 1.6Amp). This change corrects the power calculation. Due to the changed behavior of getPixelColor, powerSum must be used as-is, not scaled down again by brightness.
2023-07-06 19:06:31 +02:00
Frank
196779ffb6
XY: minor bugfix
properly handle width=0 OR height=0
2023-07-06 09:54:12 +02:00
Frank
fa281a0df0 ABL optimization
this optimization avoids to apply brightness two times .

NeoPixelBusLg has already applied global brightness at sPC. Due to internal working of the Lg bus, its sufficient to only post-apply scaling, and set the new (scaled) brightness for the next frame.
2023-07-03 19:23:57 +02:00
Frank
d48a96599f prevent races on leds buffer (looptask vs. async_tcp)
I still see strange crashes in setPixelColor/GetpixelColor, which ssem to come from race conditions between async_tcp (change presets) and looptask (strip.service).
To make the situation better, its important that any global pointers are reset to NULL immediately after free().
2023-07-03 19:15:50 +02:00
Frank
7de7ef8e8c fix some crashes when changing presets
This fixes some of the crashes I had when changing presets.

still not a full solution ...
2023-07-03 17:00:43 +02:00
Frank
406a254523 inactive segments robustness improvement
* Avoid uint16 underflow in width() and height(): stop > start is possible, and means "inactive segment".

Without these checks, it was possible that width() and height() produce VERY large values due to underflow.
2023-07-03 15:43:47 +02:00
Frank
eabd6f60ef soudsim bugfix
FFT_MajorPeak was just going from 0..255.
Now it simulates the full range from 21hz ... 8Khz
2023-07-03 15:07:14 +02:00
Frank
e416d06aa9
Merge pull request #3274 from Aircoookie/ABL_hotfixPlus
some optimizations for ABL hotfix
2023-07-03 14:36:46 +02:00
Frank
65e073e6b8 de-optimization
first version still cased some flickering.
This de-optimization makes LEDs more stable.
2023-07-03 14:01:45 +02:00
Titanium177
c89f38f4f8
Edited Metadata for effect 5 & 8 to be availible on just 1 Pixel (PWM) (#3275) 2023-07-01 23:18:02 +02:00
Frank
9b87892036 optimization for ABL hotfix
* adding an optional parameter to setBrightness(). ApplyPostAdjustments() will only be called if `immediate=true`. Only ABL will use immediate=true, to ensure electrical safety of equipment.

This allows some optimizations of performance, as ApplyPostAdjustments() is time consuming.

* busses.setBrightness(bri) --> applied to all future pixels (fast, lossless)
* busses.setBrightness(bri, true) --> applied directly to all previously set pixels (slower, lossy)
2023-07-01 20:09:52 +02:00
Andre Lackmann
3e519001a3
Removed current cycle assignment that clears current value (#3262) 2023-06-30 15:03:32 +02:00
Blaz Kristan
f442aad962 Misc.
- larger stack buffer for oappend
- increase max segment name for ESP32
2023-06-27 16:01:20 +02:00
Christian Schwinne
481bd6f57a
Add WiFi network scan RPC command to Improv Serial (#3271) 2023-06-27 01:51:44 +02:00
Blaž Kristan
f015227fc8
Missing WS connection fallback for liveview (#3267)
* Missing WS connection fallback for liveview
- fix for #3250

Remove (conditional WLED_ENABLE_LEGACY) legacy URI

Replace /sliders with /?sliders

* Merge liveview and liveviewws pages

Remove /url string subpage
Enable /json/live by default

* WS retry count
Removed appended ws from URL

* Also reset WS retries on successful WS connection

---------

Co-authored-by: Christian Schwinne <cschwinne@gmail.com>
2023-06-27 01:51:24 +02:00
Christian Schwinne
ebd909dfe7 Remove obsolete Visual Studio files 2023-06-26 00:17:34 +02:00
Blaz Kristan
067ed1258b Temporary bugfix for #3264 2023-06-24 21:04:46 +02:00
Blaz Kristan
ef3c72a24f Fix for #3265 2023-06-23 23:49:54 +02:00
Blaz Kristan
b257f476c9 Bugfix for #3259 2023-06-22 19:06:07 +02:00
Alerson Jorge
d3af2be79a
Adding Pixel Magic Tool to WLED (#3249)
* Adding Pixel Magic Tool to WLED

* Revert "Adding Pixel Magic Tool to WLED"

This reverts commit b4f08fa8d5.

* Adding Pixel Magic Tool to WLED

* Corrections and performance improvements

* Remove IE compatibility tag

(saves a few bytes and IE10 is over 10 years old and unsupported)
Correct HTML language attribute
(Chrome would show a popup asking to translate from Portugese)

* Corrections and performance improvements

* Enable pxmagic by default

---------

Co-authored-by: Aircoookie <21045690+Aircoookie@users.noreply.github.com>
Co-authored-by: Christian Schwinne <cschwinne@gmail.com>
2023-06-22 11:26:24 +02:00
Clayton Sims
e4ee392c27
Support for ESP-NOW Wireless Remote Control (#3237)
* Initial checkin for ESP-NOW remote feature

* cleanup irrelevant comment

* don't bring in espnow package includes when feature disabled

* Formatting and removing inaccurate call mode hardcoding

* Fork ESP Now code by platform (8266 v. esp32)

* compiled html update

* Disable ESP-NOW remote by default on ESP32 until tested

* Enable ESP-NOW remote for ESP32

* Rename ESP NOW define

---------

Co-authored-by: cschwinne <dev.aircoookie@gmail.com>
2023-06-22 10:06:19 +02:00
Blaz Kristan
cf48ad06ed New SPI display SSD1309 for 4LD.
Fixed global I2C usage (no pin allocation in usermods).
Enabled option dor Multi relay.
2023-06-21 23:31:15 +02:00
cschwinne
c04c73bbd7 WS logic: No resending, improved ESP8266 stability
Update ESP8266 core to 3.1.2
2023-06-18 01:07:50 +02:00
Blaz Kristan
4ea5723b7f Enhance pin dropdowns.
- add pins for PCF8574 (POC)
- bugfix for saving
Reduced maximum relays to 8.
Changed MultiRelay config parameter name.
2023-06-16 22:06:26 +02:00
Blaz Kristan
75244853c1 Fix for #3251 2023-06-16 10:24:56 +02:00
Aircoookie
264b3a785b Code style: define constants for settings subpage IDs 2023-06-15 23:58:22 +02:00
Frank
bb15e1d8ac
minor comment update
Small corrections in Lissajous comments
2023-06-15 09:30:44 +02:00
Blaz Kristan
7538649e81 Add optional leading 0 on time and date for Scrolling Text
- replaces #2994
2023-06-14 21:58:32 +02:00
Frank
9e69627626
2D Lissajous improvements
* allow user to control rotation speed (c3 slider)
* preserve accuracy by performing division _after_ multiplication: " (i * speed) / 32", instead of " i * (speed / 32)"
* proper rounding of "map" results, for better visual appearance
* avoid division by zero in map() function
2023-06-14 20:21:43 +02:00
Aircoookie
dd9da2853a Support settings pin unlock via JSON
Also supports locking by providing any incorrect pin
2023-06-14 11:53:39 +02:00
Blaz Kristan
f6092b9128 Build bump & updated changelog 2023-06-13 21:10:11 +02:00
Blaz Kristan
5ca8f4a3aa Merge branch 'pin-dropdown' into beta-3 2023-06-12 22:22:47 +02:00
Blaz Kristan
ba6e2f0a54 Pin dropdown updates for LED pins.
Updated pxmagic
2023-06-12 19:21:14 +02:00
Blaz Kristan
149f4e38a0 Merge branch 'main' into dev-2 2023-06-11 09:54:44 +02:00
Blaz Kristan
b5ee170726 Merge branch 'main' into beta-3 2023-06-11 09:53:39 +02:00
Blaz Kristan
e22e8ffa0e npm 2023-06-11 09:44:15 +02:00
Jason Kölker
d18d800947
fix(settings): mitigate xss
Mitigate XSS on wifi scanning from injecting arbitrary code by using
`textConent` instead of `innerHTML`.

Partially Fixes #3233
2023-06-10 23:40:02 +00:00
Blaz Kristan
3ca58ee65f Pin dropdowns POC.
NeoPixelBusGammaMethod POC.
PixelMagic POC.
Button reassign POC.
2023-06-10 20:43:27 +02:00
Blaz Kristan
21387b9a83 Bugfix download backup json 2023-06-08 09:41:38 +02:00
Blaz Kristan
ccb0d491ed Port bugfix. 2023-06-08 07:14:03 +02:00
Blaz Kristan
daa3200713 Sync page bugfix 2023-06-08 07:06:23 +02:00
Blaz Kristan
fec2d1f7ee Bugfix
- respect Settings PIN lock in /json/cfg
2023-06-07 21:43:32 +02:00
Blaz Kristan
eb8e95723c Bugfix reverse proxy path detection 2023-06-07 21:37:54 +02:00
Blaz Kristan
dfb8de2349 Fix for #3204 2023-06-06 20:56:33 +02:00
David Sawatzke
59f1cdcc82 Fix WS2801 output on boards with ethrnet (similar to #2542)
and the corresponding fix d1fed11d0d
2023-06-06 16:34:22 +02:00
Blaz Kristan
3eb8be6239 Bump version and update changelog 2023-06-04 20:14:10 +02:00
Blaz Kristan
7dfc4a651d Merge branch 'main' into beta-3 2023-06-04 20:11:27 +02:00
Blaz Kristan
189d145393 Merge branch 'main' into beta-3 2023-06-04 18:43:28 +02:00