#ifndef BusWrapper_h #define BusWrapper_h #include "NeoPixelBrightnessBus.h" // temporary - these defines should actually be set in platformio.ini // C3: I2S0 and I2S1 methods not supported (has one I2S bus) // S2: I2S1 methods not supported (has one I2S bus) // S3: I2S0 and I2S1 methods not supported yet (has two I2S buses) // https://github.com/Makuna/NeoPixelBus/blob/b32f719e95ef3c35c46da5c99538017ef925c026/src/internal/Esp32_i2s.h#L4 // https://github.com/Makuna/NeoPixelBus/blob/b32f719e95ef3c35c46da5c99538017ef925c026/src/internal/NeoEsp32RmtMethod.h#L857 #if !defined(WLED_NO_I2S0_PIXELBUS) && (defined(CONFIG_IDF_TARGET_ESP32S3) || defined(CONFIG_IDF_TARGET_ESP32C3)) #define WLED_NO_I2S0_PIXELBUS #endif #if !defined(WLED_NO_I2S1_PIXELBUS) && (defined(CONFIG_IDF_TARGET_ESP32S3) || defined(CONFIG_IDF_TARGET_ESP32C3) || defined(CONFIG_IDF_TARGET_ESP32S2)) #define WLED_NO_I2S1_PIXELBUS #endif // temporary end //Hardware SPI Pins #define P_8266_HS_MOSI 13 #define P_8266_HS_CLK 14 #define P_32_HS_MOSI 13 #define P_32_HS_CLK 14 #define P_32_VS_MOSI 23 #define P_32_VS_CLK 18 //The dirty list of possible bus types. Quite a lot... #define I_NONE 0 //ESP8266 RGB #define I_8266_U0_NEO_3 1 #define I_8266_U1_NEO_3 2 #define I_8266_DM_NEO_3 3 #define I_8266_BB_NEO_3 4 //RGBW #define I_8266_U0_NEO_4 5 #define I_8266_U1_NEO_4 6 #define I_8266_DM_NEO_4 7 #define I_8266_BB_NEO_4 8 //400Kbps #define I_8266_U0_400_3 9 #define I_8266_U1_400_3 10 #define I_8266_DM_400_3 11 #define I_8266_BB_400_3 12 //TM1814 (RGBW) #define I_8266_U0_TM1_4 13 #define I_8266_U1_TM1_4 14 #define I_8266_DM_TM1_4 15 #define I_8266_BB_TM1_4 16 //TM1829 (RGB) #define I_8266_U0_TM2_3 17 #define I_8266_U1_TM2_3 18 #define I_8266_DM_TM2_3 19 #define I_8266_BB_TM2_3 20 /*** ESP32 Neopixel methods ***/ //RGB #define I_32_RN_NEO_3 21 #define I_32_I0_NEO_3 22 #define I_32_I1_NEO_3 23 #define I_32_BB_NEO_3 24 // bitbangging on ESP32 not recommended //RGBW #define I_32_RN_NEO_4 25 #define I_32_I0_NEO_4 26 #define I_32_I1_NEO_4 27 #define I_32_BB_NEO_4 28 // bitbangging on ESP32 not recommended //400Kbps #define I_32_RN_400_3 29 #define I_32_I0_400_3 30 #define I_32_I1_400_3 31 #define I_32_BB_400_3 32 // bitbangging on ESP32 not recommended //TM1814 (RGBW) #define I_32_RN_TM1_4 33 #define I_32_I0_TM1_4 34 #define I_32_I1_TM1_4 35 //Bit Bang theoratically possible, but very undesirable and not needed (no pin restrictions on RMT and I2S) //TM1829 (RGB) #define I_32_RN_TM2_3 36 #define I_32_I0_TM2_3 37 #define I_32_I1_TM2_3 38 //Bit Bang theoratically possible, but very undesirable and not needed (no pin restrictions on RMT and I2S) //APA102 #define I_HS_DOT_3 39 //hardware SPI #define I_SS_DOT_3 40 //soft SPI //LPD8806 #define I_HS_LPD_3 41 #define I_SS_LPD_3 42 //WS2801 #define I_HS_WS1_3 43 #define I_SS_WS1_3 44 //P9813 #define I_HS_P98_3 45 #define I_SS_P98_3 46 //LPD6803 #define I_HS_LPO_3 47 #define I_SS_LPO_3 48 /*** ESP8266 Neopixel methods ***/ #ifdef ESP8266 //RGB #define B_8266_U0_NEO_3 NeoPixelBrightnessBus //3 chan, esp8266, gpio1 #define B_8266_U1_NEO_3 NeoPixelBrightnessBus //3 chan, esp8266, gpio2 #define B_8266_DM_NEO_3 NeoPixelBrightnessBus //3 chan, esp8266, gpio3 #define B_8266_BB_NEO_3 NeoPixelBrightnessBus //3 chan, esp8266, bb (any pin but 16) //RGBW #define B_8266_U0_NEO_4 NeoPixelBrightnessBus //4 chan, esp8266, gpio1 #define B_8266_U1_NEO_4 NeoPixelBrightnessBus //4 chan, esp8266, gpio2 #define B_8266_DM_NEO_4 NeoPixelBrightnessBus //4 chan, esp8266, gpio3 #define B_8266_BB_NEO_4 NeoPixelBrightnessBus //4 chan, esp8266, bb (any pin) //400Kbps #define B_8266_U0_400_3 NeoPixelBrightnessBus //3 chan, esp8266, gpio1 #define B_8266_U1_400_3 NeoPixelBrightnessBus //3 chan, esp8266, gpio2 #define B_8266_DM_400_3 NeoPixelBrightnessBus //3 chan, esp8266, gpio3 #define B_8266_BB_400_3 NeoPixelBrightnessBus //3 chan, esp8266, bb (any pin) //TM1814 (RGBW) #define B_8266_U0_TM1_4 NeoPixelBrightnessBus #define B_8266_U1_TM1_4 NeoPixelBrightnessBus #define B_8266_DM_TM1_4 NeoPixelBrightnessBus #define B_8266_BB_TM1_4 NeoPixelBrightnessBus //TM1829 (RGB) #define B_8266_U0_TM2_4 NeoPixelBrightnessBus #define B_8266_U1_TM2_4 NeoPixelBrightnessBus #define B_8266_DM_TM2_4 NeoPixelBrightnessBus #define B_8266_BB_TM2_4 NeoPixelBrightnessBus #endif /*** ESP32 Neopixel methods ***/ #ifdef ARDUINO_ARCH_ESP32 //RGB #define B_32_RN_NEO_3 NeoPixelBrightnessBus #ifndef WLED_NO_I2S0_PIXELBUS #define B_32_I0_NEO_3 NeoPixelBrightnessBus #endif #ifndef WLED_NO_I2S1_PIXELBUS #define B_32_I1_NEO_3 NeoPixelBrightnessBus #endif //#define B_32_BB_NEO_3 NeoPixelBrightnessBus // NeoEsp8266BitBang800KbpsMethod //RGBW #define B_32_RN_NEO_4 NeoPixelBrightnessBus #ifndef WLED_NO_I2S0_PIXELBUS #define B_32_I0_NEO_4 NeoPixelBrightnessBus #endif #ifndef WLED_NO_I2S1_PIXELBUS #define B_32_I1_NEO_4 NeoPixelBrightnessBus #endif //#define B_32_BB_NEO_4 NeoPixelBrightnessBus // NeoEsp8266BitBang800KbpsMethod //400Kbps #define B_32_RN_400_3 NeoPixelBrightnessBus #ifndef WLED_NO_I2S0_PIXELBUS #define B_32_I0_400_3 NeoPixelBrightnessBus #endif #ifndef WLED_NO_I2S1_PIXELBUS #define B_32_I1_400_3 NeoPixelBrightnessBus #endif //#define B_32_BB_400_3 NeoPixelBrightnessBus // NeoEsp8266BitBang400KbpsMethod //TM1814 (RGBW) #define B_32_RN_TM1_4 NeoPixelBrightnessBus #ifndef WLED_NO_I2S0_PIXELBUS #define B_32_I0_TM1_4 NeoPixelBrightnessBus #endif #ifndef WLED_NO_I2S1_PIXELBUS #define B_32_I1_TM1_4 NeoPixelBrightnessBus #endif //Bit Bang theoratically possible, but very undesirable and not needed (no pin restrictions on RMT and I2S) //TM1829 (RGB) #define B_32_RN_TM2_3 NeoPixelBrightnessBus #ifndef WLED_NO_I2S0_PIXELBUS #define B_32_I0_TM2_3 NeoPixelBrightnessBus #endif #ifndef WLED_NO_I2S1_PIXELBUS #define B_32_I1_TM2_3 NeoPixelBrightnessBus #endif //Bit Bang theoratically possible, but very undesirable and not needed (no pin restrictions on RMT and I2S) #endif //APA102 #ifdef WLED_USE_ETHERNET // fix for #2542 (by @BlackBird77) #define B_HS_DOT_3 NeoPixelBrightnessBus //hardware HSPI (was DotStarEsp32DmaHspi5MhzMethod in NPB 2.6.9) #else #define B_HS_DOT_3 NeoPixelBrightnessBus //hardware VSPI #endif #define B_SS_DOT_3 NeoPixelBrightnessBus //soft SPI //LPD8806 #define B_HS_LPD_3 NeoPixelBrightnessBus #define B_SS_LPD_3 NeoPixelBrightnessBus //LPD6803 #define B_HS_LPO_3 NeoPixelBrightnessBus #define B_SS_LPO_3 NeoPixelBrightnessBus //WS2801 #if defined(WLED_WS2801_SPEED_KHZ) && WLED_WS2801_SPEED_KHZ==40000 #define B_HS_WS1_3 NeoPixelBrightnessBus // fastest bus speed (not existing method?) #elif defined(WLED_WS2801_SPEED_KHZ) && WLED_WS2801_SPEED_KHZ==20000 #define B_HS_WS1_3 NeoPixelBrightnessBus // 20MHz #elif defined(WLED_WS2801_SPEED_KHZ) && WLED_WS2801_SPEED_KHZ==10000 #define B_HS_WS1_3 NeoPixelBrightnessBus // 10MHz #elif defined(WLED_WS2801_SPEED_KHZ) && WLED_WS2801_SPEED_KHZ==2000 #define B_HS_WS1_3 NeoPixelBrightnessBus //slower, more compatible #elif defined(WLED_WS2801_SPEED_KHZ) && WLED_WS2801_SPEED_KHZ==1000 #define B_HS_WS1_3 NeoPixelBrightnessBus //slower, more compatible #elif defined(WLED_WS2801_SPEED_KHZ) && WLED_WS2801_SPEED_KHZ==500 #define B_HS_WS1_3 NeoPixelBrightnessBus //slower, more compatible #else #define B_HS_WS1_3 NeoPixelBrightnessBus // 2MHz; slower, more compatible #endif #define B_SS_WS1_3 NeoPixelBrightnessBus //P9813 #define B_HS_P98_3 NeoPixelBrightnessBus #define B_SS_P98_3 NeoPixelBrightnessBus //handles pointer type conversion for all possible bus types class PolyBus { public: // Begin & initialize the PixelSettings for TM1814 strips. template static void beginTM1814(void* busPtr) { T tm1814_strip = static_cast(busPtr); tm1814_strip->Begin(); // Max current for each LED (22.5 mA). tm1814_strip->SetPixelSettings(NeoTm1814Settings(/*R*/225, /*G*/225, /*B*/225, /*W*/225)); } static void begin(void* busPtr, uint8_t busType, uint8_t* pins) { switch (busType) { case I_NONE: break; #ifdef ESP8266 case I_8266_U0_NEO_3: (static_cast(busPtr))->Begin(); break; case I_8266_U1_NEO_3: (static_cast(busPtr))->Begin(); break; case I_8266_DM_NEO_3: (static_cast(busPtr))->Begin(); break; case I_8266_BB_NEO_3: (static_cast(busPtr))->Begin(); break; case I_8266_U0_NEO_4: (static_cast(busPtr))->Begin(); break; case I_8266_U1_NEO_4: (static_cast(busPtr))->Begin(); break; case I_8266_DM_NEO_4: (static_cast(busPtr))->Begin(); break; case I_8266_BB_NEO_4: (static_cast(busPtr))->Begin(); break; case I_8266_U0_400_3: (static_cast(busPtr))->Begin(); break; case I_8266_U1_400_3: (static_cast(busPtr))->Begin(); break; case I_8266_DM_400_3: (static_cast(busPtr))->Begin(); break; case I_8266_BB_400_3: (static_cast(busPtr))->Begin(); break; case I_8266_U0_TM1_4: beginTM1814(busPtr); break; case I_8266_U1_TM1_4: beginTM1814(busPtr); break; case I_8266_DM_TM1_4: beginTM1814(busPtr); break; case I_8266_BB_TM1_4: beginTM1814(busPtr); break; case I_8266_U0_TM2_3: (static_cast(busPtr))->Begin(); break; case I_8266_U1_TM2_3: (static_cast(busPtr))->Begin(); break; case I_8266_DM_TM2_3: (static_cast(busPtr))->Begin(); break; case I_8266_BB_TM2_3: (static_cast(busPtr))->Begin(); break; case I_HS_DOT_3: (static_cast(busPtr))->Begin(); break; case I_HS_LPD_3: (static_cast(busPtr))->Begin(); break; case I_HS_LPO_3: (static_cast(busPtr))->Begin(); break; case I_HS_WS1_3: (static_cast(busPtr))->Begin(); break; case I_HS_P98_3: (static_cast(busPtr))->Begin(); break; #endif #ifdef ARDUINO_ARCH_ESP32 case I_32_RN_NEO_3: (static_cast(busPtr))->Begin(); break; #ifndef WLED_NO_I2S0_PIXELBUS case I_32_I0_NEO_3: (static_cast(busPtr))->Begin(); break; #endif #ifndef WLED_NO_I2S1_PIXELBUS case I_32_I1_NEO_3: (static_cast(busPtr))->Begin(); break; #endif // case I_32_BB_NEO_3: (static_cast(busPtr))->Begin(); break; case I_32_RN_NEO_4: (static_cast(busPtr))->Begin(); break; #ifndef WLED_NO_I2S0_PIXELBUS case I_32_I0_NEO_4: (static_cast(busPtr))->Begin(); break; #endif #ifndef WLED_NO_I2S1_PIXELBUS case I_32_I1_NEO_4: (static_cast(busPtr))->Begin(); break; #endif // case I_32_BB_NEO_4: (static_cast(busPtr))->Begin(); break; case I_32_RN_400_3: (static_cast(busPtr))->Begin(); break; #ifndef WLED_NO_I2S0_PIXELBUS case I_32_I0_400_3: (static_cast(busPtr))->Begin(); break; #endif #ifndef WLED_NO_I2S1_PIXELBUS case I_32_I1_400_3: (static_cast(busPtr))->Begin(); break; #endif // case I_32_BB_400_3: (static_cast(busPtr))->Begin(); break; case I_32_RN_TM1_4: beginTM1814(busPtr); break; case I_32_RN_TM2_3: (static_cast(busPtr))->Begin(); break; #ifndef WLED_NO_I2S0_PIXELBUS case I_32_I0_TM1_4: beginTM1814(busPtr); break; case I_32_I0_TM2_3: (static_cast(busPtr))->Begin(); break; #endif #ifndef WLED_NO_I2S1_PIXELBUS case I_32_I1_TM1_4: beginTM1814(busPtr); break; case I_32_I1_TM2_3: (static_cast(busPtr))->Begin(); break; #endif // ESP32 can (and should, to avoid inadvertantly driving the chip select signal) specify the pins used for SPI, but only in begin() case I_HS_DOT_3: (static_cast(busPtr))->Begin(pins[1], -1, pins[0], -1); break; case I_HS_LPD_3: (static_cast(busPtr))->Begin(pins[1], -1, pins[0], -1); break; case I_HS_LPO_3: (static_cast(busPtr))->Begin(pins[1], -1, pins[0], -1); break; case I_HS_WS1_3: (static_cast(busPtr))->Begin(pins[1], -1, pins[0], -1); break; case I_HS_P98_3: (static_cast(busPtr))->Begin(pins[1], -1, pins[0], -1); break; #endif case I_SS_DOT_3: (static_cast(busPtr))->Begin(); break; case I_SS_LPD_3: (static_cast(busPtr))->Begin(); break; case I_SS_LPO_3: (static_cast(busPtr))->Begin(); break; case I_SS_WS1_3: (static_cast(busPtr))->Begin(); break; case I_SS_P98_3: (static_cast(busPtr))->Begin(); break; } }; static void* create(uint8_t busType, uint8_t* pins, uint16_t len, uint8_t channel) { void* busPtr = nullptr; switch (busType) { case I_NONE: break; #ifdef ESP8266 case I_8266_U0_NEO_3: busPtr = new B_8266_U0_NEO_3(len, pins[0]); break; case I_8266_U1_NEO_3: busPtr = new B_8266_U1_NEO_3(len, pins[0]); break; case I_8266_DM_NEO_3: busPtr = new B_8266_DM_NEO_3(len, pins[0]); break; case I_8266_BB_NEO_3: busPtr = new B_8266_BB_NEO_3(len, pins[0]); break; case I_8266_U0_NEO_4: busPtr = new B_8266_U0_NEO_4(len, pins[0]); break; case I_8266_U1_NEO_4: busPtr = new B_8266_U1_NEO_4(len, pins[0]); break; case I_8266_DM_NEO_4: busPtr = new B_8266_DM_NEO_4(len, pins[0]); break; case I_8266_BB_NEO_4: busPtr = new B_8266_BB_NEO_4(len, pins[0]); break; case I_8266_U0_400_3: busPtr = new B_8266_U0_400_3(len, pins[0]); break; case I_8266_U1_400_3: busPtr = new B_8266_U1_400_3(len, pins[0]); break; case I_8266_DM_400_3: busPtr = new B_8266_DM_400_3(len, pins[0]); break; case I_8266_BB_400_3: busPtr = new B_8266_BB_400_3(len, pins[0]); break; case I_8266_U0_TM1_4: busPtr = new B_8266_U0_TM1_4(len, pins[0]); break; case I_8266_U1_TM1_4: busPtr = new B_8266_U1_TM1_4(len, pins[0]); break; case I_8266_DM_TM1_4: busPtr = new B_8266_DM_TM1_4(len, pins[0]); break; case I_8266_BB_TM1_4: busPtr = new B_8266_BB_TM1_4(len, pins[0]); break; case I_8266_U0_TM2_3: busPtr = new B_8266_U0_TM2_4(len, pins[0]); break; case I_8266_U1_TM2_3: busPtr = new B_8266_U1_TM2_4(len, pins[0]); break; case I_8266_DM_TM2_3: busPtr = new B_8266_DM_TM2_4(len, pins[0]); break; case I_8266_BB_TM2_3: busPtr = new B_8266_BB_TM2_4(len, pins[0]); break; #endif #ifdef ARDUINO_ARCH_ESP32 case I_32_RN_NEO_3: busPtr = new B_32_RN_NEO_3(len, pins[0], (NeoBusChannel)channel); break; #ifndef WLED_NO_I2S0_PIXELBUS case I_32_I0_NEO_3: busPtr = new B_32_I0_NEO_3(len, pins[0]); break; #endif #ifndef WLED_NO_I2S1_PIXELBUS case I_32_I1_NEO_3: busPtr = new B_32_I1_NEO_3(len, pins[0]); break; #endif // case I_32_BB_NEO_3: busPtr = new B_32_BB_NEO_3(len, pins[0], (NeoBusChannel)channel); break; case I_32_RN_NEO_4: busPtr = new B_32_RN_NEO_4(len, pins[0], (NeoBusChannel)channel); break; #ifndef WLED_NO_I2S0_PIXELBUS case I_32_I0_NEO_4: busPtr = new B_32_I0_NEO_4(len, pins[0]); break; #endif #ifndef WLED_NO_I2S1_PIXELBUS case I_32_I1_NEO_4: busPtr = new B_32_I1_NEO_4(len, pins[0]); break; #endif // case I_32_BB_NEO_4: busPtr = new B_32_BB_NEO_4(len, pins[0], (NeoBusChannel)channel); break; case I_32_RN_400_3: busPtr = new B_32_RN_400_3(len, pins[0], (NeoBusChannel)channel); break; #ifndef WLED_NO_I2S0_PIXELBUS case I_32_I0_400_3: busPtr = new B_32_I0_400_3(len, pins[0]); break; #endif #ifndef WLED_NO_I2S1_PIXELBUS case I_32_I1_400_3: busPtr = new B_32_I1_400_3(len, pins[0]); break; #endif // case I_32_BB_400_3: busPtr = new B_32_BB_400_3(len, pins[0], (NeoBusChannel)channel); break; case I_32_RN_TM1_4: busPtr = new B_32_RN_TM1_4(len, pins[0], (NeoBusChannel)channel); break; case I_32_RN_TM2_3: busPtr = new B_32_RN_TM2_3(len, pins[0], (NeoBusChannel)channel); break; #ifndef WLED_NO_I2S0_PIXELBUS case I_32_I0_TM1_4: busPtr = new B_32_I0_TM1_4(len, pins[0]); break; case I_32_I0_TM2_3: busPtr = new B_32_I0_TM2_3(len, pins[0]); break; #endif #ifndef WLED_NO_I2S1_PIXELBUS case I_32_I1_TM1_4: busPtr = new B_32_I1_TM1_4(len, pins[0]); break; case I_32_I1_TM2_3: busPtr = new B_32_I1_TM2_3(len, pins[0]); break; #endif #endif // for 2-wire: pins[1] is clk, pins[0] is dat. begin expects (len, clk, dat) case I_HS_DOT_3: busPtr = new B_HS_DOT_3(len, pins[1], pins[0]); break; case I_SS_DOT_3: busPtr = new B_SS_DOT_3(len, pins[1], pins[0]); break; case I_HS_LPD_3: busPtr = new B_HS_LPD_3(len, pins[1], pins[0]); break; case I_SS_LPD_3: busPtr = new B_SS_LPD_3(len, pins[1], pins[0]); break; case I_HS_LPO_3: busPtr = new B_HS_LPO_3(len, pins[1], pins[0]); break; case I_SS_LPO_3: busPtr = new B_SS_LPO_3(len, pins[1], pins[0]); break; case I_HS_WS1_3: busPtr = new B_HS_WS1_3(len, pins[1], pins[0]); break; case I_SS_WS1_3: busPtr = new B_SS_WS1_3(len, pins[1], pins[0]); break; case I_HS_P98_3: busPtr = new B_HS_P98_3(len, pins[1], pins[0]); break; case I_SS_P98_3: busPtr = new B_SS_P98_3(len, pins[1], pins[0]); break; } begin(busPtr, busType, pins); return busPtr; }; static void show(void* busPtr, uint8_t busType) { switch (busType) { case I_NONE: break; #ifdef ESP8266 case I_8266_U0_NEO_3: (static_cast(busPtr))->Show(); break; case I_8266_U1_NEO_3: (static_cast(busPtr))->Show(); break; case I_8266_DM_NEO_3: (static_cast(busPtr))->Show(); break; case I_8266_BB_NEO_3: (static_cast(busPtr))->Show(); break; case I_8266_U0_NEO_4: (static_cast(busPtr))->Show(); break; case I_8266_U1_NEO_4: (static_cast(busPtr))->Show(); break; case I_8266_DM_NEO_4: (static_cast(busPtr))->Show(); break; case I_8266_BB_NEO_4: (static_cast(busPtr))->Show(); break; case I_8266_U0_400_3: (static_cast(busPtr))->Show(); break; case I_8266_U1_400_3: (static_cast(busPtr))->Show(); break; case I_8266_DM_400_3: (static_cast(busPtr))->Show(); break; case I_8266_BB_400_3: (static_cast(busPtr))->Show(); break; case I_8266_U0_TM1_4: (static_cast(busPtr))->Show(); break; case I_8266_U1_TM1_4: (static_cast(busPtr))->Show(); break; case I_8266_DM_TM1_4: (static_cast(busPtr))->Show(); break; case I_8266_BB_TM1_4: (static_cast(busPtr))->Show(); break; case I_8266_U0_TM2_3: (static_cast(busPtr))->Show(); break; case I_8266_U1_TM2_3: (static_cast(busPtr))->Show(); break; case I_8266_DM_TM2_3: (static_cast(busPtr))->Show(); break; case I_8266_BB_TM2_3: (static_cast(busPtr))->Show(); break; #endif #ifdef ARDUINO_ARCH_ESP32 case I_32_RN_NEO_3: (static_cast(busPtr))->Show(); break; #ifndef WLED_NO_I2S0_PIXELBUS case I_32_I0_NEO_3: (static_cast(busPtr))->Show(); break; #endif #ifndef WLED_NO_I2S1_PIXELBUS case I_32_I1_NEO_3: (static_cast(busPtr))->Show(); break; #endif // case I_32_BB_NEO_3: (static_cast(busPtr))->Show(); break; case I_32_RN_NEO_4: (static_cast(busPtr))->Show(); break; #ifndef WLED_NO_I2S0_PIXELBUS case I_32_I0_NEO_4: (static_cast(busPtr))->Show(); break; #endif #ifndef WLED_NO_I2S1_PIXELBUS case I_32_I1_NEO_4: (static_cast(busPtr))->Show(); break; #endif // case I_32_BB_NEO_4: (static_cast(busPtr))->Show(); break; case I_32_RN_400_3: (static_cast(busPtr))->Show(); break; #ifndef WLED_NO_I2S0_PIXELBUS case I_32_I0_400_3: (static_cast(busPtr))->Show(); break; #endif #ifndef WLED_NO_I2S1_PIXELBUS case I_32_I1_400_3: (static_cast(busPtr))->Show(); break; #endif // case I_32_BB_400_3: (static_cast(busPtr))->Show(); break; case I_32_RN_TM1_4: (static_cast(busPtr))->Show(); break; case I_32_RN_TM2_3: (static_cast(busPtr))->Show(); break; #ifndef WLED_NO_I2S0_PIXELBUS case I_32_I0_TM1_4: (static_cast(busPtr))->Show(); break; case I_32_I0_TM2_3: (static_cast(busPtr))->Show(); break; #endif #ifndef WLED_NO_I2S1_PIXELBUS case I_32_I1_TM1_4: (static_cast(busPtr))->Show(); break; case I_32_I1_TM2_3: (static_cast(busPtr))->Show(); break; #endif #endif case I_HS_DOT_3: (static_cast(busPtr))->Show(); break; case I_SS_DOT_3: (static_cast(busPtr))->Show(); break; case I_HS_LPD_3: (static_cast(busPtr))->Show(); break; case I_SS_LPD_3: (static_cast(busPtr))->Show(); break; case I_HS_LPO_3: (static_cast(busPtr))->Show(); break; case I_SS_LPO_3: (static_cast(busPtr))->Show(); break; case I_HS_WS1_3: (static_cast(busPtr))->Show(); break; case I_SS_WS1_3: (static_cast(busPtr))->Show(); break; case I_HS_P98_3: (static_cast(busPtr))->Show(); break; case I_SS_P98_3: (static_cast(busPtr))->Show(); break; } }; static bool canShow(void* busPtr, uint8_t busType) { switch (busType) { case I_NONE: return true; #ifdef ESP8266 case I_8266_U0_NEO_3: return (static_cast(busPtr))->CanShow(); break; case I_8266_U1_NEO_3: return (static_cast(busPtr))->CanShow(); break; case I_8266_DM_NEO_3: return (static_cast(busPtr))->CanShow(); break; case I_8266_BB_NEO_3: return (static_cast(busPtr))->CanShow(); break; case I_8266_U0_NEO_4: return (static_cast(busPtr))->CanShow(); break; case I_8266_U1_NEO_4: return (static_cast(busPtr))->CanShow(); break; case I_8266_DM_NEO_4: return (static_cast(busPtr))->CanShow(); break; case I_8266_BB_NEO_4: return (static_cast(busPtr))->CanShow(); break; case I_8266_U0_400_3: return (static_cast(busPtr))->CanShow(); break; case I_8266_U1_400_3: return (static_cast(busPtr))->CanShow(); break; case I_8266_DM_400_3: return (static_cast(busPtr))->CanShow(); break; case I_8266_BB_400_3: return (static_cast(busPtr))->CanShow(); break; case I_8266_U0_TM1_4: return (static_cast(busPtr))->CanShow(); break; case I_8266_U1_TM1_4: return (static_cast(busPtr))->CanShow(); break; case I_8266_DM_TM1_4: return (static_cast(busPtr))->CanShow(); break; case I_8266_BB_TM1_4: return (static_cast(busPtr))->CanShow(); break; case I_8266_U0_TM2_3: return (static_cast(busPtr))->CanShow(); break; case I_8266_U1_TM2_3: return (static_cast(busPtr))->CanShow(); break; case I_8266_DM_TM2_3: return (static_cast(busPtr))->CanShow(); break; case I_8266_BB_TM2_3: return (static_cast(busPtr))->CanShow(); break; #endif #ifdef ARDUINO_ARCH_ESP32 case I_32_RN_NEO_3: return (static_cast(busPtr))->CanShow(); break; #ifndef WLED_NO_I2S0_PIXELBUS case I_32_I0_NEO_3: return (static_cast(busPtr))->CanShow(); break; #endif #ifndef WLED_NO_I2S1_PIXELBUS case I_32_I1_NEO_3: return (static_cast(busPtr))->CanShow(); break; #endif // case I_32_BB_NEO_3: return (static_cast(busPtr))->CanShow(); break; case I_32_RN_NEO_4: return (static_cast(busPtr))->CanShow(); break; #ifndef WLED_NO_I2S0_PIXELBUS case I_32_I0_NEO_4: return (static_cast(busPtr))->CanShow(); break; #endif #ifndef WLED_NO_I2S1_PIXELBUS case I_32_I1_NEO_4: return (static_cast(busPtr))->CanShow(); break; #endif // case I_32_BB_NEO_4: return (static_cast(busPtr))->CanShow(); break; case I_32_RN_400_3: return (static_cast(busPtr))->CanShow(); break; #ifndef WLED_NO_I2S0_PIXELBUS case I_32_I0_400_3: return (static_cast(busPtr))->CanShow(); break; #endif #ifndef WLED_NO_I2S1_PIXELBUS case I_32_I1_400_3: return (static_cast(busPtr))->CanShow(); break; #endif // case I_32_BB_400_3: return (static_cast(busPtr))->CanShow(); break; case I_32_RN_TM1_4: return (static_cast(busPtr))->CanShow(); break; case I_32_RN_TM2_3: return (static_cast(busPtr))->CanShow(); break; #ifndef WLED_NO_I2S0_PIXELBUS case I_32_I0_TM1_4: return (static_cast(busPtr))->CanShow(); break; case I_32_I0_TM2_3: return (static_cast(busPtr))->CanShow(); break; #endif #ifndef WLED_NO_I2S1_PIXELBUS case I_32_I1_TM1_4: return (static_cast(busPtr))->CanShow(); break; case I_32_I1_TM2_3: return (static_cast(busPtr))->CanShow(); break; #endif #endif case I_HS_DOT_3: return (static_cast(busPtr))->CanShow(); break; case I_SS_DOT_3: return (static_cast(busPtr))->CanShow(); break; case I_HS_LPD_3: return (static_cast(busPtr))->CanShow(); break; case I_SS_LPD_3: return (static_cast(busPtr))->CanShow(); break; case I_HS_LPO_3: return (static_cast(busPtr))->CanShow(); break; case I_SS_LPO_3: return (static_cast(busPtr))->CanShow(); break; case I_HS_WS1_3: return (static_cast(busPtr))->CanShow(); break; case I_SS_WS1_3: return (static_cast(busPtr))->CanShow(); break; case I_HS_P98_3: return (static_cast(busPtr))->CanShow(); break; case I_SS_P98_3: return (static_cast(busPtr))->CanShow(); break; } return true; }; static void setPixelColor(void* busPtr, uint8_t busType, uint16_t pix, uint32_t c, uint8_t co) { uint8_t r = c >> 16; uint8_t g = c >> 8; uint8_t b = c >> 0; uint8_t w = c >> 24; RgbwColor col; // reorder channels to selected order switch (co & 0x0F) { default: col.G = g; col.R = r; col.B = b; break; //0 = GRB, default case 1: col.G = r; col.R = g; col.B = b; break; //1 = RGB, common for WS2811 case 2: col.G = b; col.R = r; col.B = g; break; //2 = BRG case 3: col.G = r; col.R = b; col.B = g; break; //3 = RBG case 4: col.G = b; col.R = g; col.B = r; break; //4 = BGR case 5: col.G = g; col.R = b; col.B = r; break; //5 = GBR } // upper nibble contains W swap information switch (co >> 4) { default: col.W = w; break; // no swapping case 1: col.W = col.B; col.B = w; break; // swap W & B case 2: col.W = col.G; col.G = w; break; // swap W & G case 3: col.W = col.R; col.R = w; break; // swap W & R } switch (busType) { case I_NONE: break; #ifdef ESP8266 case I_8266_U0_NEO_3: (static_cast(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break; case I_8266_U1_NEO_3: (static_cast(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break; case I_8266_DM_NEO_3: (static_cast(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break; case I_8266_BB_NEO_3: (static_cast(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break; case I_8266_U0_NEO_4: (static_cast(busPtr))->SetPixelColor(pix, col); break; case I_8266_U1_NEO_4: (static_cast(busPtr))->SetPixelColor(pix, col); break; case I_8266_DM_NEO_4: (static_cast(busPtr))->SetPixelColor(pix, col); break; case I_8266_BB_NEO_4: (static_cast(busPtr))->SetPixelColor(pix, col); break; case I_8266_U0_400_3: (static_cast(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break; case I_8266_U1_400_3: (static_cast(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break; case I_8266_DM_400_3: (static_cast(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break; case I_8266_BB_400_3: (static_cast(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break; case I_8266_U0_TM1_4: (static_cast(busPtr))->SetPixelColor(pix, col); break; case I_8266_U1_TM1_4: (static_cast(busPtr))->SetPixelColor(pix, col); break; case I_8266_DM_TM1_4: (static_cast(busPtr))->SetPixelColor(pix, col); break; case I_8266_BB_TM1_4: (static_cast(busPtr))->SetPixelColor(pix, col); break; case I_8266_U0_TM2_3: (static_cast(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break; case I_8266_U1_TM2_3: (static_cast(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break; case I_8266_DM_TM2_3: (static_cast(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break; case I_8266_BB_TM2_3: (static_cast(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break; #endif #ifdef ARDUINO_ARCH_ESP32 case I_32_RN_NEO_3: (static_cast(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break; #ifndef WLED_NO_I2S0_PIXELBUS case I_32_I0_NEO_3: (static_cast(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break; #endif #ifndef WLED_NO_I2S1_PIXELBUS case I_32_I1_NEO_3: (static_cast(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break; #endif // case I_32_BB_NEO_3: (static_cast(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break; case I_32_RN_NEO_4: (static_cast(busPtr))->SetPixelColor(pix, col); break; #ifndef WLED_NO_I2S0_PIXELBUS case I_32_I0_NEO_4: (static_cast(busPtr))->SetPixelColor(pix, col); break; #endif #ifndef WLED_NO_I2S1_PIXELBUS case I_32_I1_NEO_4: (static_cast(busPtr))->SetPixelColor(pix, col); break; #endif // case I_32_BB_NEO_4: (static_cast(busPtr))->SetPixelColor(pix, col); break; case I_32_RN_400_3: (static_cast(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break; #ifndef WLED_NO_I2S0_PIXELBUS case I_32_I0_400_3: (static_cast(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break; #endif #ifndef WLED_NO_I2S1_PIXELBUS case I_32_I1_400_3: (static_cast(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break; #endif // case I_32_BB_400_3: (static_cast(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break; case I_32_RN_TM1_4: (static_cast(busPtr))->SetPixelColor(pix, col); break; case I_32_RN_TM2_3: (static_cast(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break; #ifndef WLED_NO_I2S0_PIXELBUS case I_32_I0_TM1_4: (static_cast(busPtr))->SetPixelColor(pix, col); break; case I_32_I0_TM2_3: (static_cast(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break; #endif #ifndef WLED_NO_I2S1_PIXELBUS case I_32_I1_TM1_4: (static_cast(busPtr))->SetPixelColor(pix, col); break; case I_32_I1_TM2_3: (static_cast(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break; #endif #endif case I_HS_DOT_3: (static_cast(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break; case I_SS_DOT_3: (static_cast(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break; case I_HS_LPD_3: (static_cast(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break; case I_SS_LPD_3: (static_cast(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break; case I_HS_LPO_3: (static_cast(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break; case I_SS_LPO_3: (static_cast(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break; case I_HS_WS1_3: (static_cast(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break; case I_SS_WS1_3: (static_cast(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break; case I_HS_P98_3: (static_cast(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break; case I_SS_P98_3: (static_cast(busPtr))->SetPixelColor(pix, RgbColor(col.R,col.G,col.B)); break; } }; static void setBrightness(void* busPtr, uint8_t busType, uint8_t b) { switch (busType) { case I_NONE: break; #ifdef ESP8266 case I_8266_U0_NEO_3: (static_cast(busPtr))->SetBrightness(b); break; case I_8266_U1_NEO_3: (static_cast(busPtr))->SetBrightness(b); break; case I_8266_DM_NEO_3: (static_cast(busPtr))->SetBrightness(b); break; case I_8266_BB_NEO_3: (static_cast(busPtr))->SetBrightness(b); break; case I_8266_U0_NEO_4: (static_cast(busPtr))->SetBrightness(b); break; case I_8266_U1_NEO_4: (static_cast(busPtr))->SetBrightness(b); break; case I_8266_DM_NEO_4: (static_cast(busPtr))->SetBrightness(b); break; case I_8266_BB_NEO_4: (static_cast(busPtr))->SetBrightness(b); break; case I_8266_U0_400_3: (static_cast(busPtr))->SetBrightness(b); break; case I_8266_U1_400_3: (static_cast(busPtr))->SetBrightness(b); break; case I_8266_DM_400_3: (static_cast(busPtr))->SetBrightness(b); break; case I_8266_BB_400_3: (static_cast(busPtr))->SetBrightness(b); break; case I_8266_U0_TM1_4: (static_cast(busPtr))->SetBrightness(b); break; case I_8266_U1_TM1_4: (static_cast(busPtr))->SetBrightness(b); break; case I_8266_DM_TM1_4: (static_cast(busPtr))->SetBrightness(b); break; case I_8266_BB_TM1_4: (static_cast(busPtr))->SetBrightness(b); break; case I_8266_U0_TM2_3: (static_cast(busPtr))->SetBrightness(b); break; case I_8266_U1_TM2_3: (static_cast(busPtr))->SetBrightness(b); break; case I_8266_DM_TM2_3: (static_cast(busPtr))->SetBrightness(b); break; case I_8266_BB_TM2_3: (static_cast(busPtr))->SetBrightness(b); break; #endif #ifdef ARDUINO_ARCH_ESP32 case I_32_RN_NEO_3: (static_cast(busPtr))->SetBrightness(b); break; #ifndef WLED_NO_I2S0_PIXELBUS case I_32_I0_NEO_3: (static_cast(busPtr))->SetBrightness(b); break; #endif #ifndef WLED_NO_I2S1_PIXELBUS case I_32_I1_NEO_3: (static_cast(busPtr))->SetBrightness(b); break; #endif // case I_32_BB_NEO_3: (static_cast(busPtr))->SetBrightness(b); break; case I_32_RN_NEO_4: (static_cast(busPtr))->SetBrightness(b); break; #ifndef WLED_NO_I2S0_PIXELBUS case I_32_I0_NEO_4: (static_cast(busPtr))->SetBrightness(b); break; #endif #ifndef WLED_NO_I2S1_PIXELBUS case I_32_I1_NEO_4: (static_cast(busPtr))->SetBrightness(b); break; #endif // case I_32_BB_NEO_4: (static_cast(busPtr))->SetBrightness(b); break; case I_32_RN_400_3: (static_cast(busPtr))->SetBrightness(b); break; #ifndef WLED_NO_I2S0_PIXELBUS case I_32_I0_400_3: (static_cast(busPtr))->SetBrightness(b); break; #endif #ifndef WLED_NO_I2S1_PIXELBUS case I_32_I1_400_3: (static_cast(busPtr))->SetBrightness(b); break; #endif // case I_32_BB_400_3: (static_cast(busPtr))->SetBrightness(b); break; case I_32_RN_TM1_4: (static_cast(busPtr))->SetBrightness(b); break; case I_32_RN_TM2_3: (static_cast(busPtr))->SetBrightness(b); break; #ifndef WLED_NO_I2S0_PIXELBUS case I_32_I0_TM1_4: (static_cast(busPtr))->SetBrightness(b); break; case I_32_I0_TM2_3: (static_cast(busPtr))->SetBrightness(b); break; #endif #ifndef WLED_NO_I2S1_PIXELBUS case I_32_I1_TM1_4: (static_cast(busPtr))->SetBrightness(b); break; case I_32_I1_TM2_3: (static_cast(busPtr))->SetBrightness(b); break; #endif #endif case I_HS_DOT_3: (static_cast(busPtr))->SetBrightness(b); break; case I_SS_DOT_3: (static_cast(busPtr))->SetBrightness(b); break; case I_HS_LPD_3: (static_cast(busPtr))->SetBrightness(b); break; case I_SS_LPD_3: (static_cast(busPtr))->SetBrightness(b); break; case I_HS_LPO_3: (static_cast(busPtr))->SetBrightness(b); break; case I_SS_LPO_3: (static_cast(busPtr))->SetBrightness(b); break; case I_HS_WS1_3: (static_cast(busPtr))->SetBrightness(b); break; case I_SS_WS1_3: (static_cast(busPtr))->SetBrightness(b); break; case I_HS_P98_3: (static_cast(busPtr))->SetBrightness(b); break; case I_SS_P98_3: (static_cast(busPtr))->SetBrightness(b); break; } }; static uint32_t getPixelColor(void* busPtr, uint8_t busType, uint16_t pix, uint8_t co) { RgbwColor col(0,0,0,0); switch (busType) { case I_NONE: break; #ifdef ESP8266 case I_8266_U0_NEO_3: col = (static_cast(busPtr))->GetPixelColor(pix); break; case I_8266_U1_NEO_3: col = (static_cast(busPtr))->GetPixelColor(pix); break; case I_8266_DM_NEO_3: col = (static_cast(busPtr))->GetPixelColor(pix); break; case I_8266_BB_NEO_3: col = (static_cast(busPtr))->GetPixelColor(pix); break; case I_8266_U0_NEO_4: col = (static_cast(busPtr))->GetPixelColor(pix); break; case I_8266_U1_NEO_4: col = (static_cast(busPtr))->GetPixelColor(pix); break; case I_8266_DM_NEO_4: col = (static_cast(busPtr))->GetPixelColor(pix); break; case I_8266_BB_NEO_4: col = (static_cast(busPtr))->GetPixelColor(pix); break; case I_8266_U0_400_3: col = (static_cast(busPtr))->GetPixelColor(pix); break; case I_8266_U1_400_3: col = (static_cast(busPtr))->GetPixelColor(pix); break; case I_8266_DM_400_3: col = (static_cast(busPtr))->GetPixelColor(pix); break; case I_8266_BB_400_3: col = (static_cast(busPtr))->GetPixelColor(pix); break; case I_8266_U0_TM1_4: col = (static_cast(busPtr))->GetPixelColor(pix); break; case I_8266_U1_TM1_4: col = (static_cast(busPtr))->GetPixelColor(pix); break; case I_8266_DM_TM1_4: col = (static_cast(busPtr))->GetPixelColor(pix); break; case I_8266_BB_TM1_4: col = (static_cast(busPtr))->GetPixelColor(pix); break; case I_8266_U0_TM2_3: col = (static_cast(busPtr))->GetPixelColor(pix); break; case I_8266_U1_TM2_3: col = (static_cast(busPtr))->GetPixelColor(pix); break; case I_8266_DM_TM2_3: col = (static_cast(busPtr))->GetPixelColor(pix); break; case I_8266_BB_TM2_3: col = (static_cast(busPtr))->GetPixelColor(pix); break; #endif #ifdef ARDUINO_ARCH_ESP32 case I_32_RN_NEO_3: col = (static_cast(busPtr))->GetPixelColor(pix); break; #ifndef WLED_NO_I2S0_PIXELBUS case I_32_I0_NEO_3: col = (static_cast(busPtr))->GetPixelColor(pix); break; #endif #ifndef WLED_NO_I2S1_PIXELBUS case I_32_I1_NEO_3: col = (static_cast(busPtr))->GetPixelColor(pix); break; #endif // case I_32_BB_NEO_3: col = (static_cast(busPtr))->GetPixelColor(pix); break; case I_32_RN_NEO_4: col = (static_cast(busPtr))->GetPixelColor(pix); break; #ifndef WLED_NO_I2S0_PIXELBUS case I_32_I0_NEO_4: col = (static_cast(busPtr))->GetPixelColor(pix); break; #endif #ifndef WLED_NO_I2S1_PIXELBUS case I_32_I1_NEO_4: col = (static_cast(busPtr))->GetPixelColor(pix); break; #endif // case I_32_BB_NEO_4: col = (static_cast(busPtr))->GetPixelColor(pix); break; case I_32_RN_400_3: col = (static_cast(busPtr))->GetPixelColor(pix); break; #ifndef WLED_NO_I2S0_PIXELBUS case I_32_I0_400_3: col = (static_cast(busPtr))->GetPixelColor(pix); break; #endif #ifndef WLED_NO_I2S1_PIXELBUS case I_32_I1_400_3: col = (static_cast(busPtr))->GetPixelColor(pix); break; #endif // case I_32_BB_400_3: col = (static_cast(busPtr))->GetPixelColor(pix); break; case I_32_RN_TM1_4: col = (static_cast(busPtr))->GetPixelColor(pix); break; case I_32_RN_TM2_3: col = (static_cast(busPtr))->GetPixelColor(pix); break; #ifndef WLED_NO_I2S0_PIXELBUS case I_32_I0_TM1_4: col = (static_cast(busPtr))->GetPixelColor(pix); break; case I_32_I0_TM2_3: col = (static_cast(busPtr))->GetPixelColor(pix); break; #endif #ifndef WLED_NO_I2S1_PIXELBUS case I_32_I1_TM1_4: col = (static_cast(busPtr))->GetPixelColor(pix); break; case I_32_I1_TM2_3: col = (static_cast(busPtr))->GetPixelColor(pix); break; #endif #endif case I_HS_DOT_3: col = (static_cast(busPtr))->GetPixelColor(pix); break; case I_SS_DOT_3: col = (static_cast(busPtr))->GetPixelColor(pix); break; case I_HS_LPD_3: col = (static_cast(busPtr))->GetPixelColor(pix); break; case I_SS_LPD_3: col = (static_cast(busPtr))->GetPixelColor(pix); break; case I_HS_LPO_3: col = (static_cast(busPtr))->GetPixelColor(pix); break; case I_SS_LPO_3: col = (static_cast(busPtr))->GetPixelColor(pix); break; case I_HS_WS1_3: col = (static_cast(busPtr))->GetPixelColor(pix); break; case I_SS_WS1_3: col = (static_cast(busPtr))->GetPixelColor(pix); break; case I_HS_P98_3: col = (static_cast(busPtr))->GetPixelColor(pix); break; case I_SS_P98_3: col = (static_cast(busPtr))->GetPixelColor(pix); break; } // upper nibble contains W swap information uint8_t w = col.W; switch (co >> 4) { case 1: col.W = col.B; col.B = w; break; // swap W & B case 2: col.W = col.G; col.G = w; break; // swap W & G case 3: col.W = col.R; col.R = w; break; // swap W & R } switch (co & 0x0F) { // W G R B default: return ((col.W << 24) | (col.G << 8) | (col.R << 16) | (col.B)); //0 = GRB, default case 1: return ((col.W << 24) | (col.R << 8) | (col.G << 16) | (col.B)); //1 = RGB, common for WS2811 case 2: return ((col.W << 24) | (col.B << 8) | (col.R << 16) | (col.G)); //2 = BRG case 3: return ((col.W << 24) | (col.B << 8) | (col.G << 16) | (col.R)); //3 = RBG case 4: return ((col.W << 24) | (col.R << 8) | (col.B << 16) | (col.G)); //4 = BGR case 5: return ((col.W << 24) | (col.G << 8) | (col.B << 16) | (col.R)); //5 = GBR } return 0; } static void cleanup(void* busPtr, uint8_t busType) { if (busPtr == nullptr) return; switch (busType) { case I_NONE: break; #ifdef ESP8266 case I_8266_U0_NEO_3: delete (static_cast(busPtr)); break; case I_8266_U1_NEO_3: delete (static_cast(busPtr)); break; case I_8266_DM_NEO_3: delete (static_cast(busPtr)); break; case I_8266_BB_NEO_3: delete (static_cast(busPtr)); break; case I_8266_U0_NEO_4: delete (static_cast(busPtr)); break; case I_8266_U1_NEO_4: delete (static_cast(busPtr)); break; case I_8266_DM_NEO_4: delete (static_cast(busPtr)); break; case I_8266_BB_NEO_4: delete (static_cast(busPtr)); break; case I_8266_U0_400_3: delete (static_cast(busPtr)); break; case I_8266_U1_400_3: delete (static_cast(busPtr)); break; case I_8266_DM_400_3: delete (static_cast(busPtr)); break; case I_8266_BB_400_3: delete (static_cast(busPtr)); break; case I_8266_U0_TM1_4: delete (static_cast(busPtr)); break; case I_8266_U1_TM1_4: delete (static_cast(busPtr)); break; case I_8266_DM_TM1_4: delete (static_cast(busPtr)); break; case I_8266_BB_TM1_4: delete (static_cast(busPtr)); break; case I_8266_U0_TM2_3: delete (static_cast(busPtr)); break; case I_8266_U1_TM2_3: delete (static_cast(busPtr)); break; case I_8266_DM_TM2_3: delete (static_cast(busPtr)); break; case I_8266_BB_TM2_3: delete (static_cast(busPtr)); break; #endif #ifdef ARDUINO_ARCH_ESP32 case I_32_RN_NEO_3: delete (static_cast(busPtr)); break; #ifndef WLED_NO_I2S0_PIXELBUS case I_32_I0_NEO_3: delete (static_cast(busPtr)); break; #endif #ifndef WLED_NO_I2S1_PIXELBUS case I_32_I1_NEO_3: delete (static_cast(busPtr)); break; #endif // case I_32_BB_NEO_3: delete (static_cast(busPtr)); break; case I_32_RN_NEO_4: delete (static_cast(busPtr)); break; #ifndef WLED_NO_I2S0_PIXELBUS case I_32_I0_NEO_4: delete (static_cast(busPtr)); break; #endif #ifndef WLED_NO_I2S1_PIXELBUS case I_32_I1_NEO_4: delete (static_cast(busPtr)); break; #endif // case I_32_BB_NEO_4: delete (static_cast(busPtr)); break; case I_32_RN_400_3: delete (static_cast(busPtr)); break; #ifndef WLED_NO_I2S0_PIXELBUS case I_32_I0_400_3: delete (static_cast(busPtr)); break; #endif #ifndef WLED_NO_I2S1_PIXELBUS case I_32_I1_400_3: delete (static_cast(busPtr)); break; #endif // case I_32_BB_400_3: delete (static_cast(busPtr)); break; case I_32_RN_TM1_4: delete (static_cast(busPtr)); break; case I_32_RN_TM2_3: delete (static_cast(busPtr)); break; #ifndef WLED_NO_I2S0_PIXELBUS case I_32_I0_TM1_4: delete (static_cast(busPtr)); break; case I_32_I0_TM2_3: delete (static_cast(busPtr)); break; #endif #ifndef WLED_NO_I2S1_PIXELBUS case I_32_I1_TM1_4: delete (static_cast(busPtr)); break; case I_32_I1_TM2_3: delete (static_cast(busPtr)); break; #endif #endif case I_HS_DOT_3: delete (static_cast(busPtr)); break; case I_SS_DOT_3: delete (static_cast(busPtr)); break; case I_HS_LPD_3: delete (static_cast(busPtr)); break; case I_SS_LPD_3: delete (static_cast(busPtr)); break; case I_HS_LPO_3: delete (static_cast(busPtr)); break; case I_SS_LPO_3: delete (static_cast(busPtr)); break; case I_HS_WS1_3: delete (static_cast(busPtr)); break; case I_SS_WS1_3: delete (static_cast(busPtr)); break; case I_HS_P98_3: delete (static_cast(busPtr)); break; case I_SS_P98_3: delete (static_cast(busPtr)); break; } } //gives back the internal type index (I_XX_XXX_X above) for the input static uint8_t getI(uint8_t busType, uint8_t* pins, uint8_t num = 0) { if (!IS_DIGITAL(busType)) return I_NONE; if (IS_2PIN(busType)) { //SPI LED chips bool isHSPI = false; #ifdef ESP8266 if (pins[0] == P_8266_HS_MOSI && pins[1] == P_8266_HS_CLK) isHSPI = true; #else // temporary hack to limit use of hardware SPI to a single SPI peripheral (HSPI): only allow ESP32 hardware serial on segment 0 // SPI global variable is normally linked to VSPI on ESP32 (or FSPI C3, S3) if (!num) isHSPI = true; #endif uint8_t t = I_NONE; switch (busType) { case TYPE_APA102: t = I_SS_DOT_3; break; case TYPE_LPD8806: t = I_SS_LPD_3; break; case TYPE_LPD6803: t = I_SS_LPO_3; break; case TYPE_WS2801: t = I_SS_WS1_3; break; case TYPE_P9813: t = I_SS_P98_3; break; default: t=I_NONE; } if (t > I_NONE && isHSPI) t--; //hardware SPI has one smaller ID than software return t; } else { #ifdef ESP8266 uint8_t offset = pins[0] -1; //for driver: 0 = uart0, 1 = uart1, 2 = dma, 3 = bitbang if (offset > 3) offset = 3; switch (busType) { case TYPE_WS2812_1CH_X3: case TYPE_WS2812_2CH_X3: case TYPE_WS2812_RGB: case TYPE_WS2812_WWA: return I_8266_U0_NEO_3 + offset; case TYPE_SK6812_RGBW: return I_8266_U0_NEO_4 + offset; case TYPE_WS2811_400KHZ: return I_8266_U0_400_3 + offset; case TYPE_TM1814: return I_8266_U0_TM1_4 + offset; case TYPE_TM1829: return I_8266_U0_TM2_3 + offset; } #else //ESP32 uint8_t offset = 0; //0 = RMT (num 0-7) 8 = I2S0 9 = I2S1 #if defined(CONFIG_IDF_TARGET_ESP32S2) // ESP32-S2 only has 4 RMT channels if (num > 4) return I_NONE; if (num > 3) offset = 1; // only one I2S #elif defined(CONFIG_IDF_TARGET_ESP32C3) // On ESP32-C3 only the first 2 RMT channels are usable for transmitting if (num > 1) return I_NONE; //if (num > 1) offset = 1; // I2S not supported yet (only 1 I2S) #elif defined(CONFIG_IDF_TARGET_ESP32S3) // On ESP32-S3 only the first 4 RMT channels are usable for transmitting if (num > 3) return I_NONE; //if (num > 3) offset = num -4; // I2S not supported yet #else // standard ESP32 has 8 RMT and 2 I2S channels if (num > 9) return I_NONE; if (num > 7) offset = num -7; #endif switch (busType) { case TYPE_WS2812_1CH_X3: case TYPE_WS2812_2CH_X3: case TYPE_WS2812_RGB: case TYPE_WS2812_WWA: return I_32_RN_NEO_3 + offset; case TYPE_SK6812_RGBW: return I_32_RN_NEO_4 + offset; case TYPE_WS2811_400KHZ: return I_32_RN_400_3 + offset; case TYPE_TM1814: return I_32_RN_TM1_4 + offset; case TYPE_TM1829: return I_32_RN_TM2_3 + offset; } #endif } return I_NONE; } }; #endif