#pragma once

#include "wled.h"

#ifndef MULTI_RELAY_MAX_RELAYS
  #define MULTI_RELAY_MAX_RELAYS 4
#endif

#ifndef MULTI_RELAY_PINS
  #define MULTI_RELAY_PINS -1
#endif

#define WLED_DEBOUNCE_THRESHOLD 50 //only consider button input of at least 50ms as valid (debouncing)

#define ON  true
#define OFF false

/*
 * This usermod handles multiple relay outputs.
 * These outputs complement built-in relay output in a way that the activation can be delayed.
 * They can also activate/deactivate in reverse logic independently.
 */


typedef struct relay_t {
  int8_t pin;
  bool active;
  bool mode;
  bool state;
  bool external;
  uint16_t delay;
  int8_t button;
} Relay;


class MultiRelay : public Usermod {

  private:
    // array of relays
    Relay _relay[MULTI_RELAY_MAX_RELAYS];

    // switch timer start time
    uint32_t _switchTimerStart = 0;
    // old brightness
    bool _oldMode;

    // usermod enabled
    bool enabled = false;  // needs to be configured (no default config)
    // status of initialisation
    bool initDone = false;

    bool HAautodiscovery = false;

    uint16_t periodicBroadcastSec = 60;
    unsigned long lastBroadcast = 0;

    // strings to reduce flash memory usage (used more than twice)
    static const char _name[];
    static const char _enabled[];
    static const char _relay_str[];
    static const char _delay_str[];
    static const char _activeHigh[];
    static const char _external[];
    static const char _button[];
    static const char _broadcast[];
    static const char _HAautodiscovery[];

    void publishMqtt(int relay) {
      //Check if MQTT Connected, otherwise it will crash the 8266
      if (WLED_MQTT_CONNECTED){
        char subuf[64];
        sprintf_P(subuf, PSTR("%s/relay/%d"), mqttDeviceTopic, relay);
        mqtt->publish(subuf, 0, false, _relay[relay].state ? "on" : "off");
      }
    }

    /**
     * switch off the strip if the delay has elapsed 
     */
    void handleOffTimer() {
      unsigned long now = millis();
      bool activeRelays = false;
      for (int i=0; i<MULTI_RELAY_MAX_RELAYS; i++) {
        if (_relay[i].active && _switchTimerStart > 0 && now - _switchTimerStart > (_relay[i].delay*1000)) {
          if (!_relay[i].external) toggleRelay(i);
          _relay[i].active = false;
        } else if (periodicBroadcastSec && now - lastBroadcast > (periodicBroadcastSec*1000)) {
          if (_relay[i].pin>=0) publishMqtt(i);
        }
        activeRelays = activeRelays || _relay[i].active;
      }
      if (!activeRelays) _switchTimerStart = 0;
      if (periodicBroadcastSec && now - lastBroadcast > (periodicBroadcastSec*1000)) lastBroadcast = now;
    }

    /**
     * HTTP API handler
     * borrowed from:
     * https://github.com/gsieben/WLED/blob/master/usermods/GeoGab-Relays/usermod_GeoGab.h
     */
    #define GEOGABVERSION "0.1.3"
    void InitHtmlAPIHandle() {  // https://github.com/me-no-dev/ESPAsyncWebServer
      DEBUG_PRINTLN(F("Relays: Initialize HTML API"));

      server.on("/relays", HTTP_GET, [this](AsyncWebServerRequest *request) {
        DEBUG_PRINTLN("Relays: HTML API");
        String janswer;
        String error = "";
        //int params = request->params();
        janswer = F("{\"NoOfRelays\":");
        janswer += String(MULTI_RELAY_MAX_RELAYS) + ",";

        if (getActiveRelayCount()) {
          // Commands
          if(request->hasParam("switch")) {
            /**** Switch ****/
            AsyncWebParameter* p = request->getParam("switch");
            // Get Values
            for (int i=0; i<MULTI_RELAY_MAX_RELAYS; i++) {
              int value = getValue(p->value(), ',', i);
              if (value==-1) {
                error = F("There must be as many arguments as relays");
              } else {
                // Switch
                if (_relay[i].external) switchRelay(i, (bool)value);
              }
            }
          } else if(request->hasParam("toggle")) {
            /**** Toggle ****/
            AsyncWebParameter* p = request->getParam("toggle");
            // Get Values
            for (int i=0;i<MULTI_RELAY_MAX_RELAYS;i++) {
              int value = getValue(p->value(), ',', i);
              if (value==-1) {
                error = F("There must be as many arguments as relays");
              } else {
                // Toggle
                if (value && _relay[i].external) toggleRelay(i);
              }
            }
          } else {
            error = F("No valid command found");
          }
        } else {
          error = F("No active relays");
        }

        // Status response
        char sbuf[16];
        for (int i=0; i<MULTI_RELAY_MAX_RELAYS; i++) {
          sprintf_P(sbuf, PSTR("\"%d\":%d,"), i, (_relay[i].pin<0 ? -1 : (int)_relay[i].state));
          janswer += sbuf;
        }
        janswer += F("\"error\":\"");
        janswer += error;
        janswer += F("\",");
        janswer += F("\"SW Version\":\"");
        janswer += String(GEOGABVERSION);
        janswer += F("\"}");
        request->send(200, "application/json", janswer);
      });
    }

    int getValue(String data, char separator, int index) {
      int found = 0;
      int strIndex[] = {0, -1};
      int maxIndex = data.length()-1;

      for(int i=0; i<=maxIndex && found<=index; i++){
        if(data.charAt(i)==separator || i==maxIndex){
            found++;
            strIndex[0] = strIndex[1]+1;
            strIndex[1] = (i == maxIndex) ? i+1 : i;
        }
      }
      return found>index ? data.substring(strIndex[0], strIndex[1]).toInt() : -1;
    }

  public:
    /**
     * constructor
     */
    MultiRelay() {
      const int8_t defPins[] = {MULTI_RELAY_PINS};
      for (int i=0; i<MULTI_RELAY_MAX_RELAYS; i++) {
        _relay[i].pin      = i<sizeof(defPins) ? defPins[i] : -1;
        _relay[i].delay    = 0;
        _relay[i].mode     = false;
        _relay[i].active   = false;
        _relay[i].state    = false;
        _relay[i].external = false;
        _relay[i].button   = -1;
      }
    }
    /**
     * desctructor
     */
    ~MultiRelay() {}

    /**
     * Enable/Disable the usermod
     */
    inline void enable(bool enable) { enabled = enable; }
    /**
     * Get usermod enabled/disabled state
     */
    inline bool isEnabled() { return enabled; }

    /**
     * switch relay on/off
     */
    void switchRelay(uint8_t relay, bool mode) {
      if (relay>=MULTI_RELAY_MAX_RELAYS || _relay[relay].pin<0) return;
      _relay[relay].state = mode;
      pinMode(_relay[relay].pin, OUTPUT);
      digitalWrite(_relay[relay].pin, mode ? !_relay[relay].mode : _relay[relay].mode);
      publishMqtt(relay);
    }

    /**
     * toggle relay
     */
    inline void toggleRelay(uint8_t relay) {
      switchRelay(relay, !_relay[relay].state);
    }

    uint8_t getActiveRelayCount() {
      uint8_t count = 0;
      for (int i=0; i<MULTI_RELAY_MAX_RELAYS; i++) if (_relay[i].pin>=0) count++;
      return count;
    }

    //Functions called by WLED

    /**
     * handling of MQTT message
     * topic only contains stripped topic (part after /wled/MAC)
     * topic should look like: /relay/X/command; where X is relay number, 0 based
     */
    bool onMqttMessage(char* topic, char* payload) {
      if (strlen(topic) > 8 && strncmp_P(topic, PSTR("/relay/"), 7) == 0 && strncmp_P(topic+8, PSTR("/command"), 8) == 0) {
        uint8_t relay = strtoul(topic+7, NULL, 10);
        if (relay<MULTI_RELAY_MAX_RELAYS) {
          String action = payload;
          if (action == "on") {
            if (_relay[relay].external) switchRelay(relay, true);
            return true;
          } else if (action == "off") {
            if (_relay[relay].external) switchRelay(relay, false);
            return true;
          } else if (action == "toggle") {
            if (_relay[relay].external) toggleRelay(relay);
            return true;
          }
        }
      }
      return false;
    }

    /**
     * subscribe to MQTT topic for controlling relays
     */
    void onMqttConnect(bool sessionPresent) {
      //(re)subscribe to required topics
      char subuf[64];
      if (mqttDeviceTopic[0] != 0) {
        strcpy(subuf, mqttDeviceTopic);
        strcat_P(subuf, PSTR("/relay/#"));
        mqtt->subscribe(subuf, 0);
        if (HAautodiscovery) publishHomeAssistantAutodiscovery();
        for (int i=0; i<MULTI_RELAY_MAX_RELAYS; i++) {
          if (_relay[i].pin<0) continue;
          publishMqtt(i); //publish current state
        }
      }
    }

    void publishHomeAssistantAutodiscovery() {
      for (int i = 0; i < MULTI_RELAY_MAX_RELAYS; i++) {
        char uid[24], json_str[1024], buf[128];
        size_t payload_size;
        sprintf_P(uid, PSTR("%s_sw%d"), escapedMac.c_str(), i);

        if (_relay[i].pin >= 0 && _relay[i].external) {
          StaticJsonDocument<1024> json;
          sprintf_P(buf, PSTR("%s Switch %d"), serverDescription, i); //max length: 33 + 8 + 3 = 44
          json[F("name")] = buf;

          sprintf_P(buf, PSTR("%s/relay/%d"), mqttDeviceTopic, i); //max length: 33 + 7 + 3 = 43
          json["~"] = buf;
          strcat_P(buf, PSTR("/command"));
          mqtt->subscribe(buf, 0);

          json[F("stat_t")]  = "~";
          json[F("cmd_t")]   = F("~/command");
          json[F("pl_off")]  = "off";
          json[F("pl_on")]   = "on";
          json[F("uniq_id")] = uid;

          strcpy(buf, mqttDeviceTopic); //max length: 33 + 7 = 40
          strcat_P(buf, PSTR("/status"));
          json[F("avty_t")]       = buf;
          json[F("pl_avail")]     = F("online");
          json[F("pl_not_avail")] = F("offline");
          //TODO: dev
          payload_size = serializeJson(json, json_str);
        } else {
          //Unpublish disabled or internal relays
          json_str[0]  = 0;
          payload_size = 0;
        }
        sprintf_P(buf, PSTR("homeassistant/switch/%s/config"), uid);
        mqtt->publish(buf, 0, true, json_str, payload_size);
      }
    }

    /**
     * setup() is called once at boot. WiFi is not yet connected at this point.
     * You can use it to initialize variables, sensors or similar.
     */
    void setup() {
      // pins retrieved from cfg.json (readFromConfig()) prior to running setup()
      for (int i=0; i<MULTI_RELAY_MAX_RELAYS; i++) {
        if (_relay[i].pin<0) continue;
        if (!pinManager.allocatePin(_relay[i].pin,true, PinOwner::UM_MultiRelay)) {
          _relay[i].pin = -1;  // allocation failed
        } else {
          if (!_relay[i].external) _relay[i].state = !offMode;
          switchRelay(i, _relay[i].state);
          _relay[i].active = false;
        }
      }
      _oldMode = offMode;
      initDone = true;
    }

    /**
     * connected() is called every time the WiFi is (re)connected
     * Use it to initialize network interfaces
     */
    void connected() {
      InitHtmlAPIHandle();
    }

    /**
     * loop() is called continuously. Here you can check for events, read sensors, etc.
     */
    void loop() {
      yield();
      if (!enabled || strip.isUpdating()) return;

      static unsigned long lastUpdate = 0;
      if (millis() - lastUpdate < 100) return;  // update only 10 times/s
      lastUpdate = millis();

      //set relay when LEDs turn on
      if (_oldMode != offMode) {
        _oldMode = offMode;
        _switchTimerStart = millis();
        for (int i=0; i<MULTI_RELAY_MAX_RELAYS; i++) {
          if (_relay[i].pin>=0 && !_relay[i].external) _relay[i].active = true;
        }
      }

      handleOffTimer();
    }

    /**
     * handleButton() can be used to override default button behaviour. Returning true
     * will prevent button working in a default way.
     * Replicating button.cpp
     */
    bool handleButton(uint8_t b) {
      yield();
      if (!enabled
       || buttonType[b] == BTN_TYPE_NONE
       || buttonType[b] == BTN_TYPE_RESERVED
       || buttonType[b] == BTN_TYPE_PIR_SENSOR
       || buttonType[b] == BTN_TYPE_ANALOG
       || buttonType[b] == BTN_TYPE_ANALOG_INVERTED) {
        return false;
      }

      bool handled = false;
      for (int i=0; i<MULTI_RELAY_MAX_RELAYS; i++) {
        if (_relay[i].button == b && _relay[i].external) {
          handled = true;
        }
      }
      if (!handled) return false;

      unsigned long now = millis();

      //button is not momentary, but switch. This is only suitable on pins whose on-boot state does not matter (NOT gpio0)
      if (buttonType[b] == BTN_TYPE_SWITCH) {
        //handleSwitch(b);
        if (buttonPressedBefore[b] != isButtonPressed(b)) {
          buttonPressedTime[b] = now;
          buttonPressedBefore[b] = !buttonPressedBefore[b];
        }

        if (buttonLongPressed[b] == buttonPressedBefore[b]) return handled;
          
        if (now - buttonPressedTime[b] > WLED_DEBOUNCE_THRESHOLD) { //fire edge event only after 50ms without change (debounce)
          for (int i=0; i<MULTI_RELAY_MAX_RELAYS; i++) {
            if (_relay[i].button == b) {
              switchRelay(i, buttonPressedBefore[b]);
              buttonLongPressed[b] = buttonPressedBefore[b]; //save the last "long term" switch state
            }
          }
        }
        return handled;
      }

      //momentary button logic
      if (isButtonPressed(b)) { //pressed

        if (!buttonPressedBefore[b]) buttonPressedTime[b] = now;
        buttonPressedBefore[b] = true;

        if (now - buttonPressedTime[b] > 600) { //long press
          //longPressAction(b); //not exposed
          //handled = false; //use if you want to pass to default behaviour
          buttonLongPressed[b] = true;
        }

      } else if (!isButtonPressed(b) && buttonPressedBefore[b]) { //released

        long dur = now - buttonPressedTime[b];
        if (dur < WLED_DEBOUNCE_THRESHOLD) {
          buttonPressedBefore[b] = false;
          return handled;
        } //too short "press", debounce
        bool doublePress = buttonWaitTime[b]; //did we have short press before?
        buttonWaitTime[b] = 0;

        if (!buttonLongPressed[b]) { //short press
          // if this is second release within 350ms it is a double press (buttonWaitTime!=0)
          if (doublePress) {
            //doublePressAction(b); //not exposed
            //handled = false; //use if you want to pass to default behaviour
          } else  {
            buttonWaitTime[b] = now;
          }
        }
        buttonPressedBefore[b] = false;
        buttonLongPressed[b] = false;
      }
      // if 350ms elapsed since last press/release it is a short press
      if (buttonWaitTime[b] && now - buttonWaitTime[b] > 350 && !buttonPressedBefore[b]) {
        buttonWaitTime[b] = 0;
        //shortPressAction(b); //not exposed
        for (int i=0; i<MULTI_RELAY_MAX_RELAYS; i++) {
          if (_relay[i].button == b) {
            toggleRelay(i);
          }
        }
      }
      return handled;
    }
  
    /**
     * addToJsonInfo() can be used to add custom entries to the /json/info part of the JSON API.
     */
    void addToJsonInfo(JsonObject &root) {
      if (enabled) {
        JsonObject user = root["u"];
        if (user.isNull())
          user = root.createNestedObject("u");

        JsonArray infoArr = user.createNestedArray(FPSTR(_name)); //name
        infoArr.add(String(getActiveRelayCount()));
        infoArr.add(F(" relays"));

        String uiDomString;
        for (int i=0; i<MULTI_RELAY_MAX_RELAYS; i++) {
          if (_relay[i].pin<0 || !_relay[i].external) continue;
          uiDomString = F("Relay "); uiDomString += i;
          JsonArray infoArr = user.createNestedArray(uiDomString); // timer value

          uiDomString = F("<button class=\"btn btn-xs\" onclick=\"requestJson({");
          uiDomString += FPSTR(_name);
          uiDomString += F(":{");
          uiDomString += FPSTR(_relay_str);
          uiDomString += F(":");
          uiDomString += i;
          uiDomString += F(",on:");
          uiDomString += _relay[i].state ? "false" : "true";
          uiDomString += F("}});\">");
          uiDomString += F("<i class=\"icons");
          uiDomString += _relay[i].state ? F(" on") : F(" off");
          uiDomString += F("\">&#xe08f;</i></button>");
          infoArr.add(uiDomString);
        }
      }
    }

    /**
     * addToJsonState() can be used to add custom entries to the /json/state part of the JSON API (state object).
     * Values in the state object may be modified by connected clients
     */
    void addToJsonState(JsonObject &root) {
      if (!initDone || !enabled) return;  // prevent crash on boot applyPreset()
      JsonObject multiRelay = root[FPSTR(_name)];
      if (multiRelay.isNull()) {
        multiRelay = root.createNestedObject(FPSTR(_name));
      }
      #if MULTI_RELAY_MAX_RELAYS > 1
      JsonArray rel_arr = multiRelay.createNestedArray(F("relays"));
      for (int i=0; i<MULTI_RELAY_MAX_RELAYS; i++) {
        if (_relay[i].pin < 0) continue;
        JsonObject relay = rel_arr.createNestedObject();
        relay[FPSTR(_relay_str)] = i;
        relay[F("state")] = _relay[i].state;
      }
      #else
      multiRelay[FPSTR(_relay_str)] = 0;
      multiRelay[F("state")] = _relay[0].state;
      #endif
    }

    /**
     * readFromJsonState() can be used to receive data clients send to the /json/state part of the JSON API (state object).
     * Values in the state object may be modified by connected clients
     */
    void readFromJsonState(JsonObject &root) {
      if (!initDone || !enabled) return;  // prevent crash on boot applyPreset()
      JsonObject usermod = root[FPSTR(_name)];
      if (!usermod.isNull()) {
        if (usermod[FPSTR(_relay_str)].is<int>() && usermod[FPSTR(_relay_str)].as<int>()>=0) {
          int rly = usermod[FPSTR(_relay_str)].as<int>();
          if (usermod["on"].is<bool>()) {
            switchRelay(rly, usermod["on"].as<bool>());
          } else if (usermod["on"].is<const char*>() && usermod["on"].as<const char*>()[0] == 't') {
            toggleRelay(rly);
          }
        }
      } else if (root[FPSTR(_name)].is<JsonArray>()) {
        JsonArray relays = root[FPSTR(_name)].as<JsonArray>();
        for (JsonVariant r : relays) {
          if (r[FPSTR(_relay_str)].is<int>() && r[FPSTR(_relay_str)].as<int>()>=0) {
            int rly = r[FPSTR(_relay_str)].as<int>();
            if (r["on"].is<bool>()) {
              switchRelay(rly, r["on"].as<bool>());
            } else if (r["on"].is<const char*>() && r["on"].as<const char*>()[0] == 't') {
              toggleRelay(rly);
            }
          }
        }
      }
    }

    /**
     * provide the changeable values
     */
    void addToConfig(JsonObject &root) {
      JsonObject top = root.createNestedObject(FPSTR(_name));

      top[FPSTR(_enabled)] = enabled;
      top[FPSTR(_broadcast)] = periodicBroadcastSec;
      for (int i=0; i<MULTI_RELAY_MAX_RELAYS; i++) {
        String parName = FPSTR(_relay_str); parName += '-'; parName += i;
        JsonObject relay = top.createNestedObject(parName);
        relay["pin"]              = _relay[i].pin;
        relay[FPSTR(_activeHigh)] = _relay[i].mode;
        relay[FPSTR(_delay_str)]  = _relay[i].delay;
        relay[FPSTR(_external)]   = _relay[i].external;
        relay[FPSTR(_button)]     = _relay[i].button;
      }
      top[FPSTR(_HAautodiscovery)] = HAautodiscovery;
      DEBUG_PRINTLN(F("MultiRelay config saved."));
    }

    /**
     * restore the changeable values
     * readFromConfig() is called before setup() to populate properties from values stored in cfg.json
     * 
     * The function should return true if configuration was successfully loaded or false if there was no configuration.
     */
    bool readFromConfig(JsonObject &root) {
      int8_t oldPin[MULTI_RELAY_MAX_RELAYS];

      JsonObject top = root[FPSTR(_name)];
      if (top.isNull()) {
        DEBUG_PRINT(FPSTR(_name));
        DEBUG_PRINTLN(F(": No config found. (Using defaults.)"));
        return false;
      }

      enabled = top[FPSTR(_enabled)] | enabled;
      periodicBroadcastSec = top[FPSTR(_broadcast)] | periodicBroadcastSec;
      periodicBroadcastSec = min(900,max(0,(int)periodicBroadcastSec));
      HAautodiscovery = top[FPSTR(_HAautodiscovery)] | HAautodiscovery;

      for (int i=0; i<MULTI_RELAY_MAX_RELAYS; i++) {
        String parName = FPSTR(_relay_str); parName += '-'; parName += i;
        oldPin[i]          = _relay[i].pin;
        _relay[i].pin      = top[parName]["pin"] | _relay[i].pin;
        _relay[i].mode     = top[parName][FPSTR(_activeHigh)] | _relay[i].mode;
        _relay[i].external = top[parName][FPSTR(_external)]   | _relay[i].external;
        _relay[i].delay    = top[parName][FPSTR(_delay_str)]  | _relay[i].delay;
        _relay[i].button   = top[parName][FPSTR(_button)]     | _relay[i].button;
        // begin backwards compatibility (beta) remove when 0.13 is released
        parName += '-';
        _relay[i].pin      = top[parName+"pin"] | _relay[i].pin;
        _relay[i].mode     = top[parName+FPSTR(_activeHigh)] | _relay[i].mode;
        _relay[i].external = top[parName+FPSTR(_external)]   | _relay[i].external;
        _relay[i].delay    = top[parName+FPSTR(_delay_str)]  | _relay[i].delay;
        // end compatibility
        _relay[i].delay    = min(600,max(0,abs((int)_relay[i].delay))); // bounds checking max 10min
      }

      DEBUG_PRINT(FPSTR(_name));
      if (!initDone) {
        // reading config prior to setup()
        DEBUG_PRINTLN(F(" config loaded."));
      } else {
        // deallocate all pins 1st
        for (int i=0; i<MULTI_RELAY_MAX_RELAYS; i++)
          if (oldPin[i]>=0) {
            pinManager.deallocatePin(oldPin[i], PinOwner::UM_MultiRelay);
          }
        // allocate new pins
        for (int i=0; i<MULTI_RELAY_MAX_RELAYS; i++) {
          if (_relay[i].pin>=0 && pinManager.allocatePin(_relay[i].pin, true, PinOwner::UM_MultiRelay)) {
            if (!_relay[i].external) {
              _relay[i].state = !offMode;
              switchRelay(i, _relay[i].state);
              _oldMode = offMode;
            }
          } else {
            _relay[i].pin = -1;
          }
          _relay[i].active = false;
        }
        DEBUG_PRINTLN(F(" config (re)loaded."));
      }
      // use "return !top["newestParameter"].isNull();" when updating Usermod with new features
      return !top[FPSTR(_HAautodiscovery)].isNull();
    }

    /**
     * getId() allows you to optionally give your V2 usermod an unique ID (please define it in const.h!).
     * This could be used in the future for the system to determine whether your usermod is installed.
     */
    uint16_t getId()
    {
      return USERMOD_ID_MULTI_RELAY;
    }
};

// strings to reduce flash memory usage (used more than twice)
const char MultiRelay::_name[]       PROGMEM = "MultiRelay";
const char MultiRelay::_enabled[]    PROGMEM = "enabled";
const char MultiRelay::_relay_str[]  PROGMEM = "relay";
const char MultiRelay::_delay_str[]  PROGMEM = "delay-s";
const char MultiRelay::_activeHigh[] PROGMEM = "active-high";
const char MultiRelay::_external[]   PROGMEM = "external";
const char MultiRelay::_button[]     PROGMEM = "button";
const char MultiRelay::_broadcast[]  PROGMEM = "broadcast-sec";
const char MultiRelay::_HAautodiscovery[] PROGMEM = "HA-autodiscovery";