; PlatformIO Project Configuration File ; Please visit documentation: https://docs.platformio.org/page/projectconf.html [platformio] # ------------------------------------------------------------------------------ # ENVIRONMENTS # # Please uncomment one of the lines below to select your board(s) # (use `platformio_override.ini` when building for your own board; see `platformio_override.ini.sample` for an example) # ------------------------------------------------------------------------------ # CI binaries ; default_envs = nodemcuv2, esp8266_2m, esp01_1m_full, esp32dev, esp32_eth # ESP32 variant builds are temporarily excluded from CI due to toolchain issues on the GitHub Actions Linux environment default_envs = nodemcuv2, esp8266_2m, esp01_1m_full, esp32dev, esp32_eth, lolin_s2_mini, esp32c3dev, esp32s3dev_8MB, esp32s3dev_8MB_PSRAM_opi # Release binaries ; default_envs = nodemcuv2, esp8266_2m, esp01_1m_full, esp32dev, esp32_eth, lolin_s2_mini, esp32c3dev, esp32s3dev_8MB # Build everything ; default_envs = esp32dev, esp8285_4CH_MagicHome, codm-controller-0_6-rev2, codm-controller-0_6, esp32s2_saola, d1_mini_5CH_Shojo_PCB, d1_mini, sp501e, nodemcuv2, esp32_eth, anavi_miracle_controller, esp07, esp01_1m_full, m5atom, h803wf, d1_mini_ota, heltec_wifi_kit_8, esp8285_H801, d1_mini_debug, wemos_shield_esp32, elekstube_ips # Single binaries (uncomment your board) ; default_envs = elekstube_ips ; default_envs = nodemcuv2 ; default_envs = esp8266_2m ; default_envs = esp01_1m_full ; default_envs = esp07 ; default_envs = d1_mini ; default_envs = heltec_wifi_kit_8 ; default_envs = h803wf ; default_envs = d1_mini_debug ; default_envs = d1_mini_ota ; default_envs = esp32dev ; default_envs = esp8285_4CH_MagicHome ; default_envs = esp8285_H801 ; default_envs = d1_mini_5CH_Shojo_PCB ; default_envs = wemos_shield_esp32 ; default_envs = m5atom ; default_envs = esp32_eth ; default_envs = esp32dev_qio80 ; default_envs = esp32_eth_ota1mapp ; default_envs = esp32s2_saola ; default_envs = esp32c3dev ; default_envs = lolin_s2_mini src_dir = ./wled00 data_dir = ./wled00/data build_cache_dir = ~/.buildcache extra_configs = platformio_override.ini [common] # ------------------------------------------------------------------------------ # PLATFORM: # !! DO NOT confuse platformio's ESP8266 development platform with Arduino core for ESP8266 # # arduino core 2.6.3 = platformIO 2.3.2 # arduino core 2.7.0 = platformIO 2.5.0 # ------------------------------------------------------------------------------ arduino_core_2_6_3 = espressif8266@2.3.3 arduino_core_2_7_4 = espressif8266@2.6.2 arduino_core_3_0_0 = espressif8266@3.0.0 arduino_core_3_2_0 = espressif8266@3.2.0 arduino_core_4_1_0 = espressif8266@4.1.0 arduino_core_3_1_2 = espressif8266@4.2.0 # Development platforms arduino_core_develop = https://github.com/platformio/platform-espressif8266#develop arduino_core_git = https://github.com/platformio/platform-espressif8266#feature/stage # Platform to use for ESP8266 platform_wled_default = ${common.arduino_core_3_1_2} # We use 2.7.4.7 for all, includes PWM flicker fix and Wstring optimization #platform_packages = tasmota/framework-arduinoespressif8266 @ 3.20704.7 platform_packages = platformio/framework-arduinoespressif8266 platformio/toolchain-xtensa @ ~2.100300.220621 #2.40802.200502 platformio/tool-esptool #@ ~1.413.0 platformio/tool-esptoolpy #@ ~1.30000.0 ## previous platform for 8266, in case of problems with the new one ## you'll need makuna/NeoPixelBus@ 2.6.9 for arduino_core_3_2_0, which does not support Ucs890x ;; platform_wled_default = ${common.arduino_core_3_2_0} ;; platform_packages = tasmota/framework-arduinoespressif8266 @ 3.20704.7 ;; platformio/toolchain-xtensa @ ~2.40802.200502 ;; platformio/tool-esptool @ ~1.413.0 ;; platformio/tool-esptoolpy @ ~1.30000.0 # ------------------------------------------------------------------------------ # FLAGS: DEBUG # # ------------------------------------------------------------------------------ debug_flags = -D DEBUG=1 -D WLED_DEBUG -DDEBUG_ESP_WIFI -DDEBUG_ESP_HTTP_CLIENT -DDEBUG_ESP_HTTP_UPDATE -DDEBUG_ESP_HTTP_SERVER -DDEBUG_ESP_UPDATER -DDEBUG_ESP_OTA -DDEBUG_TLS_MEM #if needed (for memleaks etc) also add; -DDEBUG_ESP_OOM -include "umm_malloc/umm_malloc_cfg.h" #-DDEBUG_ESP_CORE is not working right now # ------------------------------------------------------------------------------ # FLAGS: ldscript (available ldscripts at https://github.com/esp8266/Arduino/tree/master/tools/sdk/ld) # ldscript_2m1m (2048 KB) = 1019 KB sketch, 4 KB eeprom, 1004 KB spiffs, 16 KB reserved # ldscript_4m1m (4096 KB) = 1019 KB sketch, 4 KB eeprom, 1002 KB spiffs, 16 KB reserved, 2048 KB empty/ota? # # Available lwIP variants (macros): # -DPIO_FRAMEWORK_ARDUINO_LWIP_HIGHER_BANDWIDTH = v1.4 Higher Bandwidth (default) # -DPIO_FRAMEWORK_ARDUINO_LWIP2_LOW_MEMORY = v2 Lower Memory # -DPIO_FRAMEWORK_ARDUINO_LWIP2_HIGHER_BANDWIDTH = v2 Higher Bandwidth # -DPIO_FRAMEWORK_ARDUINO_LWIP2_HIGHER_BANDWIDTH_LOW_FLASH # # BearSSL performance: # When building with -DSECURE_CLIENT=SECURE_CLIENT_BEARSSL, please add `board_build.f_cpu = 160000000` to the environment configuration # # BearSSL ciphers: # When building on core >= 2.5, you can add the build flag -DBEARSSL_SSL_BASIC in order to build BearSSL with a limited set of ciphers: # TLS_RSA_WITH_AES_128_CBC_SHA256 / AES128-SHA256 # TLS_RSA_WITH_AES_256_CBC_SHA256 / AES256-SHA256 # TLS_RSA_WITH_AES_128_CBC_SHA / AES128-SHA # TLS_RSA_WITH_AES_256_CBC_SHA / AES256-SHA # This reduces the OTA size with ~45KB, so it's especially useful on low memory boards (512k/1m). # ------------------------------------------------------------------------------ build_flags = -Wno-attributes -DMQTT_MAX_PACKET_SIZE=1024 -DSECURE_CLIENT=SECURE_CLIENT_BEARSSL -DBEARSSL_SSL_BASIC -D CORE_DEBUG_LEVEL=0 -D NDEBUG -Wno-attributes ;; silence warnings about unknown attribute 'maybe_unused' in NeoPixelBus #build_flags for the IRremoteESP8266 library (enabled decoders have to appear here) -D _IR_ENABLE_DEFAULT_=false -D DECODE_HASH=true -D DECODE_NEC=true -D DECODE_SONY=true -D DECODE_SAMSUNG=true -D DECODE_LG=true ;-Dregister= # remove warnings in C++17 due to use of deprecated register keyword by the FastLED library ;; warning: this breaks framework code on ESP32-C3 and ESP32-S2 -DWLED_USE_MY_CONFIG ; -D USERMOD_SENSORSTOMQTT #For ADS1115 sensor uncomment following ; -D USERMOD_ADS1115 build_unflags = build_flags_esp8266 = ${common.build_flags} ${esp8266.build_flags} build_flags_esp32 = ${common.build_flags} ${esp32.build_flags} build_flags_esp32_V4= ${common.build_flags} ${esp32_idf_V4.build_flags} ldscript_1m128k = eagle.flash.1m128.ld ldscript_2m512k = eagle.flash.2m512.ld ldscript_2m1m = eagle.flash.2m1m.ld ldscript_4m1m = eagle.flash.4m1m.ld [scripts_defaults] extra_scripts = pre:pio-scripts/set_version.py post:pio-scripts/output_bins.py post:pio-scripts/strip-floats.py pre:pio-scripts/user_config_copy.py # ------------------------------------------------------------------------------ # COMMON SETTINGS: # ------------------------------------------------------------------------------ [env] framework = arduino board_build.flash_mode = dout monitor_speed = 115200 # slow upload speed (comment this out with a ';' when building for development use) upload_speed = 115200 # fast upload speed (remove ';' when building for development use) ; upload_speed = 921600 # ------------------------------------------------------------------------------ # LIBRARIES: required dependencies # Please note that we don't always use the latest version of a library. # # The following libraries have been included (and some of them changed) in the source: # ArduinoJson@5.13.5, E131@1.0.0(changed), Time@1.5, Timezone@1.2.1 # ------------------------------------------------------------------------------ lib_compat_mode = strict lib_deps = fastled/FastLED @ 3.6.0 IRremoteESP8266 @ 2.8.2 makuna/NeoPixelBus @ 2.7.5 https://github.com/Aircoookie/ESPAsyncWebServer.git @ ~2.0.7 #For use of the TTGO T-Display ESP32 Module with integrated TFT display uncomment the following line #TFT_eSPI #For compatible OLED display uncomment following #U8g2 #@ ~2.33.15 #For Dallas sensor uncomment following #OneWire @ ~2.3.7 #For BME280 sensor uncomment following #BME280 @ ~3.0.0 ; adafruit/Adafruit BMP280 Library @ 2.1.0 ; adafruit/Adafruit CCS811 Library @ 1.0.4 ; adafruit/Adafruit Si7021 Library @ 1.4.0 #For ADS1115 sensor uncomment following ; adafruit/Adafruit BusIO @ 1.13.2 ; adafruit/Adafruit ADS1X15 @ 2.4.0 extra_scripts = ${scripts_defaults.extra_scripts} [esp8266] build_flags = -DESP8266 -DFP_IN_IROM ;-Wno-deprecated-declarations ;-Wno-register ;; leaves some warnings when compiling C files: command-line option '-Wno-register' is valid for C++/ObjC++ but not for C ;-Dregister= # remove warnings in C++17 due to use of deprecated register keyword by the FastLED library ;; warning: this can be dangerous -Wno-misleading-indentation ; NONOSDK22x_190703 = 2.2.2-dev(38a443e) -DPIO_FRAMEWORK_ARDUINO_ESPRESSIF_SDK22x_190703 ; lwIP 2 - Higher Bandwidth no Features ; -DPIO_FRAMEWORK_ARDUINO_LWIP2_HIGHER_BANDWIDTH_LOW_FLASH ; lwIP 1.4 - Higher Bandwidth (Aircoookie has) -DPIO_FRAMEWORK_ARDUINO_LWIP_HIGHER_BANDWIDTH ; VTABLES in Flash -DVTABLES_IN_FLASH ; restrict to minimal mime-types -DMIMETYPE_MINIMAL lib_deps = #https://github.com/lorol/LITTLEFS.git ESPAsyncTCP @ 1.2.2 ESPAsyncUDP ${env.lib_deps} [esp32] #platform = https://github.com/tasmota/platform-espressif32/releases/download/v2.0.2.3/platform-espressif32-2.0.2.3.zip platform = espressif32@3.5.0 platform_packages = framework-arduinoespressif32 @ https://github.com/Aircoookie/arduino-esp32.git#1.0.6.4 build_flags = -g -DARDUINO_ARCH_ESP32 #-DCONFIG_LITTLEFS_FOR_IDF_3_2 -D CONFIG_ASYNC_TCP_USE_WDT=0 #use LITTLEFS library by lorol in ESP32 core 1.x.x instead of built-in in 2.x.x -D LOROL_LITTLEFS ; -DARDUINO_USB_CDC_ON_BOOT=0 ;; this flag is mandatory for "classic ESP32" when building with arduino-esp32 >=2.0.3 default_partitions = tools/WLED_ESP32_4MB_1MB_FS.csv lib_deps = https://github.com/lorol/LITTLEFS.git https://github.com/pbolduc/AsyncTCP.git @ 1.2.0 ${env.lib_deps} [esp32_idf_V4] ;; experimental build environment for ESP32 using ESP-IDF 4.4.x / arduino-esp32 v2.0.5 ;; very similar to the normal ESP32 flags, but omitting Lorol LittleFS, as littlefs is included in the new framework already. ;; ;; please note that you can NOT update existing ESP32 installs with a "V4" build. Also updating by OTA will not work properly. ;; You need to completely erase your device (esptool erase_flash) first, then install the "V4" build from VSCode+platformio. platform = espressif32@5.3.0 platform_packages = build_flags = -g -Wshadow=compatible-local ;; emit warning in case a local variable "shadows" another local one -DARDUINO_ARCH_ESP32 -DESP32 #-DCONFIG_LITTLEFS_FOR_IDF_3_2 -D CONFIG_ASYNC_TCP_USE_WDT=0 -DARDUINO_USB_CDC_ON_BOOT=0 ;; this flag is mandatory for "classic ESP32" when building with arduino-esp32 >=2.0.3 default_partitions = tools/WLED_ESP32_4MB_1MB_FS.csv lib_deps = https://github.com/pbolduc/AsyncTCP.git @ 1.2.0 ${env.lib_deps} [esp32s2] ;; generic definitions for all ESP32-S2 boards platform = espressif32@5.3.0 platform_packages = build_flags = -g -DARDUINO_ARCH_ESP32 -DARDUINO_ARCH_ESP32S2 -DCONFIG_IDF_TARGET_ESP32S2=1 -D CONFIG_ASYNC_TCP_USE_WDT=0 -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=0 -DCO -DARDUINO_USB_MODE=0 ;; this flag is mandatory for ESP32-S2 ! ;; please make sure that the following flags are properly set (to 0 or 1) by your board.json, or included in your custom platformio_override.ini entry: ;; ARDUINO_USB_CDC_ON_BOOT lib_deps = https://github.com/pbolduc/AsyncTCP.git @ 1.2.0 ${env.lib_deps} [esp32c3] ;; generic definitions for all ESP32-C3 boards platform = espressif32@5.3.0 platform_packages = build_flags = -g -DARDUINO_ARCH_ESP32 -DARDUINO_ARCH_ESP32C3 -DCONFIG_IDF_TARGET_ESP32C3=1 -D CONFIG_ASYNC_TCP_USE_WDT=0 -DCO -DARDUINO_USB_MODE=1 ;; this flag is mandatory for ESP32-C3 ;; please make sure that the following flags are properly set (to 0 or 1) by your board.json, or included in your custom platformio_override.ini entry: ;; ARDUINO_USB_CDC_ON_BOOT lib_deps = https://github.com/pbolduc/AsyncTCP.git @ 1.2.0 ${env.lib_deps} [esp32s3] ;; generic definitions for all ESP32-S3 boards platform = espressif32@5.3.0 platform_packages = build_flags = -g -DESP32 -DARDUINO_ARCH_ESP32 -DARDUINO_ARCH_ESP32S3 -DCONFIG_IDF_TARGET_ESP32S3=1 -D CONFIG_ASYNC_TCP_USE_WDT=0 -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_DFU_ON_BOOT=0 -DCO ;; please make sure that the following flags are properly set (to 0 or 1) by your board.json, or included in your custom platformio_override.ini entry: ;; ARDUINO_USB_MODE, ARDUINO_USB_CDC_ON_BOOT lib_deps = https://github.com/pbolduc/AsyncTCP.git @ 1.2.0 ${env.lib_deps} # ------------------------------------------------------------------------------ # WLED BUILDS # ------------------------------------------------------------------------------ [env:nodemcuv2] board = nodemcuv2 platform = ${common.platform_wled_default} platform_packages = ${common.platform_packages} board_build.ldscript = ${common.ldscript_4m1m} build_unflags = ${common.build_unflags} build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 #-DWLED_DISABLE_2D lib_deps = ${esp8266.lib_deps} monitor_filters = esp8266_exception_decoder [env:esp8266_2m] board = esp_wroom_02 platform = ${common.platform_wled_default} platform_packages = ${common.platform_packages} board_build.ldscript = ${common.ldscript_2m512k} build_unflags = ${common.build_unflags} build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP02 lib_deps = ${esp8266.lib_deps} [env:esp01_1m_full] board = esp01_1m platform = ${common.platform_wled_default} platform_packages = ${common.platform_packages} board_build.ldscript = ${common.ldscript_1m128k} build_unflags = ${common.build_unflags} build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP01 -D WLED_DISABLE_OTA lib_deps = ${esp8266.lib_deps} [env:esp07] board = esp07 platform = ${common.platform_wled_default} platform_packages = ${common.platform_packages} board_build.ldscript = ${common.ldscript_4m1m} build_unflags = ${common.build_unflags} build_flags = ${common.build_flags_esp8266} lib_deps = ${esp8266.lib_deps} [env:d1_mini] board = d1_mini platform = ${common.platform_wled_default} platform_packages = ${common.platform_packages} upload_speed = 921600 board_build.ldscript = ${common.ldscript_4m1m} build_unflags = ${common.build_unflags} build_flags = ${common.build_flags_esp8266} lib_deps = ${esp8266.lib_deps} monitor_filters = esp8266_exception_decoder [env:heltec_wifi_kit_8] board = d1_mini platform = ${common.platform_wled_default} platform_packages = ${common.platform_packages} board_build.ldscript = ${common.ldscript_4m1m} build_unflags = ${common.build_unflags} build_flags = ${common.build_flags_esp8266} lib_deps = ${esp8266.lib_deps} [env:h803wf] board = d1_mini platform = ${common.platform_wled_default} platform_packages = ${common.platform_packages} board_build.ldscript = ${common.ldscript_4m1m} build_unflags = ${common.build_unflags} build_flags = ${common.build_flags_esp8266} -D LEDPIN=1 -D WLED_DISABLE_INFRARED lib_deps = ${esp8266.lib_deps} [env:esp32dev] board = esp32dev platform = ${esp32.platform} platform_packages = ${esp32.platform_packages} build_unflags = ${common.build_unflags} build_flags = ${common.build_flags_esp32} -D WLED_RELEASE_NAME=ESP32 #-D WLED_DISABLE_BROWNOUT_DET lib_deps = ${esp32.lib_deps} monitor_filters = esp32_exception_decoder board_build.partitions = ${esp32.default_partitions} [env:esp32dev_qio80] board = esp32dev platform = ${esp32.platform} platform_packages = ${esp32.platform_packages} build_unflags = ${common.build_unflags} build_flags = ${common.build_flags_esp32} -D WLED_RELEASE_NAME=ESP32_qio80 #-D WLED_DISABLE_BROWNOUT_DET lib_deps = ${esp32.lib_deps} monitor_filters = esp32_exception_decoder board_build.partitions = ${esp32.default_partitions} board_build.f_flash = 80000000L board_build.flash_mode = qio [env:esp32dev_V4_dio80] ;; experimental ESP32 env using ESP-IDF V4.4.x ;; Warning: this build environment is not stable!! ;; please erase your device before installing. board = esp32dev platform = ${esp32_idf_V4.platform} platform_packages = ${esp32_idf_V4.platform_packages} build_unflags = ${common.build_unflags} build_flags = ${common.build_flags} ${esp32_idf_V4.build_flags} -D WLED_RELEASE_NAME=ESP32_V4_qio80 #-D WLED_DISABLE_BROWNOUT_DET lib_deps = ${esp32_idf_V4.lib_deps} monitor_filters = esp32_exception_decoder board_build.partitions = ${esp32_idf_V4.default_partitions} board_build.f_flash = 80000000L board_build.flash_mode = dio [env:esp32_eth] board = esp32-poe platform = ${esp32.platform} platform_packages = ${esp32.platform_packages} upload_speed = 921600 build_unflags = ${common.build_unflags} build_flags = ${common.build_flags_esp32} -D WLED_RELEASE_NAME=ESP32_Ethernet -D RLYPIN=-1 -D WLED_USE_ETHERNET -D BTNPIN=-1 -D WLED_DISABLE_ESPNOW ;; ESP-NOW requires wifi, may crash with ethernet only lib_deps = ${esp32.lib_deps} board_build.partitions = ${esp32.default_partitions} [env:esp32s2_saola] board = esp32-s2-saola-1 platform = https://github.com/tasmota/platform-espressif32/releases/download/v2.0.2.2/platform-tasmota-espressif32-2.0.2.zip platform_packages = framework = arduino board_build.partitions = tools/WLED_ESP32_4MB_1MB_FS.csv board_build.flash_mode = qio upload_speed = 460800 build_unflags = ${common.build_unflags} build_flags = ${common.build_flags} ${esp32s2.build_flags} #-D WLED_RELEASE_NAME=S2_saola ;-DLOLIN_WIFI_FIX ;; try this in case Wifi does not work -DARDUINO_USB_CDC_ON_BOOT=1 lib_deps = ${esp32s2.lib_deps} [env:esp32c3dev] extends = esp32c3 platform = ${esp32c3.platform} platform_packages = ${esp32c3.platform_packages} framework = arduino board = esp32-c3-devkitm-1 board_build.partitions = tools/WLED_ESP32_4MB_1MB_FS.csv build_flags = ${common.build_flags} ${esp32c3.build_flags} #-D WLED_RELEASE_NAME=ESP32-C3 -D WLED_WATCHDOG_TIMEOUT=0 -DLOLIN_WIFI_FIX ; seems to work much better with this -DARDUINO_USB_CDC_ON_BOOT=1 ;; for virtual CDC USB ;-DARDUINO_USB_CDC_ON_BOOT=0 ;; for serial-to-USB chip upload_speed = 460800 build_unflags = ${common.build_unflags} lib_deps = ${esp32c3.lib_deps} [env:esp32s3dev_8MB] ;; ESP32-S3-DevKitC-1 development board, with 8MB FLASH, no PSRAM (flash_mode: qio) board = esp32-s3-devkitc-1 platform = ${esp32s3.platform} platform_packages = ${esp32s3.platform_packages} upload_speed = 921600 ; or 460800 build_unflags = ${common.build_unflags} build_flags = ${common.build_flags} ${esp32s3.build_flags} -D CONFIG_LITTLEFS_FOR_IDF_3_2 -D WLED_WATCHDOG_TIMEOUT=0 -D ARDUINO_USB_CDC_ON_BOOT=0 ;; -D ARDUINO_USB_MODE=1 ;; for boards with serial-to-USB chip ;-D ARDUINO_USB_CDC_ON_BOOT=1 ;; -D ARDUINO_USB_MODE=1 ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB") ;-D WLED_DEBUG lib_deps = ${esp32s3.lib_deps} board_build.partitions = tools/WLED_ESP32_8MB.csv board_build.f_flash = 80000000L board_build.flash_mode = qio ; board_build.flash_mode = dio ;; try this if you have problems at startup monitor_filters = esp32_exception_decoder [env:esp32s3dev_8MB_PSRAM_opi] ;; ESP32-S3 development board, with 8MB FLASH and >= 8MB PSRAM (memory_type: qio_opi) board = esp32-s3-devkitc-1 ;; generic dev board; the next line adds PSRAM support board_build.arduino.memory_type = qio_opi ;; use with PSRAM: 8MB or 16MB platform = ${esp32s3.platform} platform_packages = ${esp32s3.platform_packages} upload_speed = 921600 build_unflags = ${common.build_unflags} build_flags = ${common.build_flags} ${esp32s3.build_flags} -D CONFIG_LITTLEFS_FOR_IDF_3_2 -D WLED_WATCHDOG_TIMEOUT=0 ;-D ARDUINO_USB_CDC_ON_BOOT=0 ;; -D ARDUINO_USB_MODE=1 ;; for boards with serial-to-USB chip -D ARDUINO_USB_CDC_ON_BOOT=1 -D ARDUINO_USB_MODE=1 ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB") ; -D WLED_RELEASE_NAME=ESP32-S3_PSRAM -D WLED_USE_PSRAM -DBOARD_HAS_PSRAM ; tells WLED that PSRAM shall be used lib_deps = ${esp32s3.lib_deps} board_build.partitions = tools/WLED_ESP32_8MB.csv board_build.f_flash = 80000000L board_build.flash_mode = qio monitor_filters = esp32_exception_decoder [env:esp32s3dev_8MB_PSRAM_qspi] ;; ESP32-TinyS3 development board, with 8MB FLASH and PSRAM (memory_type: qio_qspi) extends = env:esp32s3dev_8MB_PSRAM_opi ;board = um_tinys3 ; -> needs workaround from https://github.com/Aircoookie/WLED/pull/2905#issuecomment-1328049860 board = esp32-s3-devkitc-1 ;; generic dev board; the next line adds PSRAM support board_build.arduino.memory_type = qio_qspi ;; use with PSRAM: 2MB or 4MB [env:esp8285_4CH_MagicHome] board = esp8285 platform = ${common.platform_wled_default} platform_packages = ${common.platform_packages} board_build.ldscript = ${common.ldscript_1m128k} build_unflags = ${common.build_unflags} build_flags = ${common.build_flags_esp8266} -D WLED_DISABLE_OTA lib_deps = ${esp8266.lib_deps} [env:esp8285_H801] board = esp8285 platform = ${common.platform_wled_default} platform_packages = ${common.platform_packages} board_build.ldscript = ${common.ldscript_1m128k} build_unflags = ${common.build_unflags} build_flags = ${common.build_flags_esp8266} -D WLED_DISABLE_OTA lib_deps = ${esp8266.lib_deps} [env:d1_mini_5CH_Shojo_PCB] board = d1_mini platform = ${common.platform_wled_default} platform_packages = ${common.platform_packages} board_build.ldscript = ${common.ldscript_4m1m} build_unflags = ${common.build_unflags} build_flags = ${common.build_flags_esp8266} -D WLED_USE_SHOJO_PCB lib_deps = ${esp8266.lib_deps} # ------------------------------------------------------------------------------ # DEVELOPMENT BOARDS # ------------------------------------------------------------------------------ [env:d1_mini_debug] board = d1_mini build_type = debug platform = ${common.platform_wled_default} platform_packages = ${common.platform_packages} board_build.ldscript = ${common.ldscript_4m1m} build_unflags = ${common.build_unflags} build_flags = ${common.build_flags_esp8266} ${common.debug_flags} lib_deps = ${esp8266.lib_deps} [env:d1_mini_ota] board = d1_mini upload_protocol = espota # exchange for your WLED IP upload_port = "10.10.1.27" platform = ${common.platform_wled_default} platform_packages = ${common.platform_packages} board_build.ldscript = ${common.ldscript_4m1m} build_unflags = ${common.build_unflags} build_flags = ${common.build_flags_esp8266} lib_deps = ${esp8266.lib_deps} [env:anavi_miracle_controller] board = d1_mini platform = ${common.platform_wled_default} platform_packages = ${common.platform_packages} board_build.ldscript = ${common.ldscript_4m1m} build_unflags = ${common.build_unflags} build_flags = ${common.build_flags_esp8266} -D LEDPIN=12 -D IRPIN=-1 -D RLYPIN=2 lib_deps = ${esp8266.lib_deps} [env:lolin_s2_mini] platform = ${esp32s2.platform} platform_packages = ${esp32s2.platform_packages} board = lolin_s2_mini board_build.partitions = tools/WLED_ESP32_4MB_1MB_FS.csv build_unflags = ${common.build_unflags} #-DARDUINO_USB_CDC_ON_BOOT=1 build_flags = ${common.build_flags} ${esp32s2.build_flags} #-D WLED_RELEASE_NAME=LolinS2 -DBOARD_HAS_PSRAM -DARDUINO_USB_CDC_ON_BOOT=1 # try disabling and enabling unflag above in case of board-specific issues, will disable Serial -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=0 -DLOLIN_WIFI_FIX ; seems to work much better with this -D WLED_USE_PSRAM -D WLED_WATCHDOG_TIMEOUT=0 -D CONFIG_ASYNC_TCP_USE_WDT=0 -D LEDPIN=16 -D BTNPIN=18 -D RLYPIN=9 -D IRPIN=7 -D HW_PIN_SCL=35 -D HW_PIN_SDA=33 -D HW_PIN_CLOCKSPI=7 -D HW_PIN_DATASPI=11 -D HW_PIN_MISOSPI=9 ; -D STATUSLED=15 lib_deps = ${esp32s2.lib_deps} # ------------------------------------------------------------------------------ # custom board configurations # ------------------------------------------------------------------------------ [env:esp32c3dev_2MB] ;; for ESP32-C3 boards with 2MB flash (instead of 4MB). ;; this board need a specific partition file. OTA not possible. extends = esp32c3 platform = ${esp32c3.platform} platform_packages = ${esp32c3.platform_packages} board = esp32-c3-devkitm-1 build_flags = ${common.build_flags} ${esp32c3.build_flags} #-D WLED_RELEASE_NAME=ESP32-C3 -D WLED_WATCHDOG_TIMEOUT=0 -D WLED_DISABLE_OTA ; -DARDUINO_USB_CDC_ON_BOOT=1 ;; for virtual CDC USB -DARDUINO_USB_CDC_ON_BOOT=0 ;; for serial-to-USB chip build_unflags = ${common.build_unflags} upload_speed = 115200 lib_deps = ${esp32c3.lib_deps} board_build.partitions = tools/WLED_ESP32_2MB_noOTA.csv board_build.flash_mode = dio [env:wemos_shield_esp32] board = esp32dev platform = ${esp32.platform} platform_packages = ${esp32.platform_packages} upload_speed = 460800 build_unflags = ${common.build_unflags} build_flags = ${common.build_flags_esp32} -D LEDPIN=16 -D RLYPIN=19 -D BTNPIN=17 -D IRPIN=18 -D UWLED_USE_MY_CONFIG -D USERMOD_DALLASTEMPERATURE -D USERMOD_FOUR_LINE_DISPLAY -D TEMPERATURE_PIN=23 -D USE_ALT_DISPlAY ; new versions of USERMOD_FOUR_LINE_DISPLAY and USERMOD_ROTARY_ENCODER_UI -D USERMOD_AUDIOREACTIVE lib_deps = ${esp32.lib_deps} OneWire@~2.3.5 olikraus/U8g2 @ ^2.28.8 https://github.com/blazoncek/arduinoFFT.git board_build.partitions = ${esp32.default_partitions} [env:m5atom] board = esp32dev build_unflags = ${common.build_unflags} build_flags = ${common.build_flags_esp32} -D LEDPIN=27 -D BTNPIN=39 lib_deps = ${esp32.lib_deps} platform = ${esp32.platform} platform_packages = ${esp32.platform_packages} board_build.partitions = ${esp32.default_partitions} [env:sp501e] board = esp_wroom_02 platform = ${common.platform_wled_default} board_build.ldscript = ${common.ldscript_2m512k} build_flags = ${common.build_flags_esp8266} -D LEDPIN=3 -D BTNPIN=1 lib_deps = ${esp8266.lib_deps} [env:sp511e] board = esp_wroom_02 platform = ${common.platform_wled_default} board_build.ldscript = ${common.ldscript_2m512k} build_flags = ${common.build_flags_esp8266} -D LEDPIN=3 -D BTNPIN=2 -D IRPIN=5 -D WLED_MAX_BUTTONS=3 lib_deps = ${esp8266.lib_deps} [env:Athom_RGBCW] ;7w and 5w(GU10) bulbs board = esp8285 platform = ${common.platform_wled_default} platform_packages = ${common.platform_packages} board_build.ldscript = ${common.ldscript_2m512k} build_unflags = ${common.build_unflags} build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 -D BTNPIN=-1 -D RLYPIN=-1 -D DATA_PINS=4,12,14,13,5 -D DEFAULT_LED_TYPE=TYPE_ANALOG_5CH -D WLED_DISABLE_INFRARED -D WLED_MAX_CCT_BLEND=0 lib_deps = ${esp8266.lib_deps} [env:Athom_15w_RGBCW] ;15w bulb board = esp8285 platform = ${common.platform_wled_default} platform_packages = ${common.platform_packages} board_build.ldscript = ${common.ldscript_2m512k} build_unflags = ${common.build_unflags} build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 -D BTNPIN=-1 -D RLYPIN=-1 -D DATA_PINS=4,12,14,5,13 -D DEFAULT_LED_TYPE=TYPE_ANALOG_5CH -D WLED_DISABLE_INFRARED -D WLED_MAX_CCT_BLEND=0 -D WLED_USE_IC_CCT lib_deps = ${esp8266.lib_deps} [env:Athom_3Pin_Controller] ;small controller with only data board = esp8285 platform = ${common.platform_wled_default} platform_packages = ${common.platform_packages} board_build.ldscript = ${common.ldscript_2m512k} build_unflags = ${common.build_unflags} build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 -D BTNPIN=0 -D RLYPIN=-1 -D LEDPIN=1 -D WLED_DISABLE_INFRARED lib_deps = ${esp8266.lib_deps} [env:Athom_4Pin_Controller] ; With clock and data interface board = esp8285 platform = ${common.platform_wled_default} platform_packages = ${common.platform_packages} board_build.ldscript = ${common.ldscript_2m512k} build_unflags = ${common.build_unflags} build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 -D BTNPIN=0 -D RLYPIN=12 -D LEDPIN=1 -D WLED_DISABLE_INFRARED lib_deps = ${esp8266.lib_deps} [env:Athom_5Pin_Controller] ;Analog light strip controller board = esp8285 platform = ${common.platform_wled_default} platform_packages = ${common.platform_packages} board_build.ldscript = ${common.ldscript_2m512k} build_unflags = ${common.build_unflags} build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 -D BTNPIN=0 -D RLYPIN=-1 DATA_PINS=4,12,14,13 -D WLED_DISABLE_INFRARED lib_deps = ${esp8266.lib_deps} [env:MY9291] board = esp01_1m platform = ${common.platform_wled_default} platform_packages = ${common.platform_packages} board_build.ldscript = ${common.ldscript_1m128k} build_unflags = ${common.build_unflags} build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP01 -D WLED_DISABLE_OTA -D USERMOD_MY9291 lib_deps = ${esp8266.lib_deps} # ------------------------------------------------------------------------------ # codm pixel controller board configurations # codm-controller-0_6 can also be used for the TYWE3S controller # ------------------------------------------------------------------------------ [env:codm-controller-0_6] board = esp_wroom_02 platform = ${common.platform_wled_default} platform_packages = ${common.platform_packages} board_build.ldscript = ${common.ldscript_2m512k} build_unflags = ${common.build_unflags} build_flags = ${common.build_flags_esp8266} lib_deps = ${esp8266.lib_deps} [env:codm-controller-0_6-rev2] board = esp_wroom_02 platform = ${common.platform_wled_default} platform_packages = ${common.platform_packages} board_build.ldscript = ${common.ldscript_4m1m} build_unflags = ${common.build_unflags} build_flags = ${common.build_flags_esp8266} lib_deps = ${esp8266.lib_deps} # ------------------------------------------------------------------------------ # EleksTube-IPS # ------------------------------------------------------------------------------ [env:elekstube_ips] board = esp32dev platform = ${esp32.platform} platform_packages = ${esp32.platform_packages} upload_speed = 921600 build_flags = ${common.build_flags_esp32} -D WLED_DISABLE_BROWNOUT_DET -D WLED_DISABLE_INFRARED -D USERMOD_RTC -D USERMOD_ELEKSTUBE_IPS -D LEDPIN=12 -D RLYPIN=27 -D BTNPIN=34 -D DEFAULT_LED_COUNT=6 # Display config -D ST7789_DRIVER -D TFT_WIDTH=135 -D TFT_HEIGHT=240 -D CGRAM_OFFSET -D TFT_SDA_READ -D TFT_MOSI=23 -D TFT_SCLK=18 -D TFT_DC=25 -D TFT_RST=26 -D SPI_FREQUENCY=40000000 -D USER_SETUP_LOADED monitor_filters = esp32_exception_decoder lib_deps = ${esp32.lib_deps} TFT_eSPI @ ^2.3.70 board_build.partitions = ${esp32.default_partitions}