/* * Main sketch, global variable declarations */ /* * @title WLED project sketch * @version 0.9.0-b2 * @author Christian Schwinne */ //ESP8266-01 (blue) got too little storage space to work with all features of WLED. To use it, you must use ESP8266 Arduino Core v2.4.2 and the setting 512K(No SPIFFS). //ESP8266-01 (black) has 1MB flash and can thus fit the whole program. Use 1M(64K SPIFFS). //Uncomment some of the following lines to disable features to compile for ESP8266-01 (max flash size 434kB): //You are required to disable over-the-air updates: //#define WLED_DISABLE_OTA //saves 14kb //You need to choose some of these features to disable: //#define WLED_DISABLE_ALEXA //saves 11kb //#define WLED_DISABLE_BLYNK //saves 6kb //#define WLED_DISABLE_CRONIXIE //saves 3kb //#define WLED_DISABLE_HUESYNC //saves 4kb //#define WLED_DISABLE_INFRARED //there is no pin left for this on ESP8266-01, saves 25kb (!) #define WLED_ENABLE_MQTT //saves 12kb #define WLED_ENABLE_ADALIGHT //saves 500b only #define WLED_DISABLE_FILESYSTEM //SPIFFS is not used by any WLED feature yet //#define WLED_ENABLE_FS_SERVING //Enable sending html file from SPIFFS before serving progmem version //#define WLED_ENABLE_FS_EDITOR //enable /edit page for editing SPIFFS content. Will also be disabled with OTA lock //to toggle usb serial debug (un)comment the following line //#define WLED_DEBUG //library inclusions #include #ifdef ESP8266 #include #include #include #else #include #include "esp_wifi.h" #include #include #include "SPIFFS.h" #endif #include #include #include #include #ifndef WLED_DISABLE_OTA #include #endif #include #include "src/dependencies/time/TimeLib.h" #include "src/dependencies/timezone/Timezone.h" #ifndef WLED_DISABLE_ALEXA #define ESPALEXA_ASYNC #define ESPALEXA_NO_SUBPAGE #define ESPALEXA_MAXDEVICES 1 //#define ESPALEXA_DEBUG #include "src/dependencies/espalexa/Espalexa.h" #endif #ifndef WLED_DISABLE_BLYNK #include "src/dependencies/blynk/BlynkSimpleEsp.h" #endif #include "src/dependencies/e131/ESPAsyncE131.h" #include "src/dependencies/async-mqtt-client/AsyncMqttClient.h" #include "src/dependencies/json/AsyncJson-v6.h" #include "src/dependencies/json/ArduinoJson-v6.h" #include "html_ui.h" #include "html_settings.h" #include "html_other.h" #include "FX.h" #include "ir_codes.h" #if IR_PIN < 0 #ifndef WLED_DISABLE_INFRARED #define WLED_DISABLE_INFRARED #endif #endif #ifdef ARDUINO_ARCH_ESP32 #undef WLED_USE_ANALOG_LEDS // Solid RGBW not implemented for ESP32 yet /*#ifndef WLED_DISABLE_INFRARED #include #endif*/ //there are issues with ESP32 infrared, so it is disabled for now #else #ifndef WLED_DISABLE_INFRARED #include #include #include #endif #endif //version code in format yymmddb (b = daily build) #define VERSION 1912231 char versionString[] = "0.9.0-b2"; //AP and OTA default passwords (for maximum change them!) char apPass[65] = "wled1234"; char otaPass[33] = "wledota"; //Hardware CONFIG (only changeble HERE, not at runtime) //LED strip pin, button pin and IR pin changeable in NpbWrapper.h! byte auxDefaultState = 0; //0: input 1: high 2: low byte auxTriggeredState = 0; //0: input 1: high 2: low char ntpServerName[33] = "0.wled.pool.ntp.org";//NTP server to use //WiFi CONFIG (all these can be changed via web UI, no need to set them here) char clientSSID[33] = "Your_Network"; char clientPass[65] = ""; char cmDNS[33] = "x"; //mDNS address (placeholder, will be replaced by wledXXXXXXXXXXXX.local) char apSSID[33] = ""; //AP off by default (unless setup) byte apChannel = 1; //2.4GHz WiFi AP channel (1-13) byte apHide = 0; //hidden AP SSID //byte apWaitTimeSecs = 32; //time to wait for connection before opening AP byte apBehavior = 0; //0: Open AP when no connection after boot 1: Open when no connection 2: Always open 3: Only when button pressed for 6 sec //bool recoveryAPDisabled = false; //never open AP (not recommended) IPAddress staticIP(0, 0, 0, 0); //static IP of ESP IPAddress staticGateway(0, 0, 0, 0); //gateway (router) IP IPAddress staticSubnet(255, 255, 255, 0); //most common subnet in home networks //LED CONFIG uint16_t ledCount = 30; //overcurrent prevented by ABL bool useRGBW = false; //SK6812 strips can contain an extra White channel bool autoRGBtoRGBW = false; //if RGBW enabled, calculate White channel from RGB #define ABL_MILLIAMPS_DEFAULT 850; //auto lower brightness to stay close to milliampere limit bool turnOnAtBoot = true; //turn on LEDs at power-up byte bootPreset = 0; //save preset to load after power-up byte col[]{255, 160, 0, 0}; //default RGB(W) color byte colSec[]{0, 0, 0, 0}; //default RGB(W) secondary color byte briS = 128; //default brightness byte nightlightTargetBri = 0; //brightness after nightlight is over byte nightlightDelayMins = 60; bool nightlightFade = true; //if enabled, light will gradually dim towards the target bri. Otherwise, it will instantly set after delay over bool fadeTransition = true; //enable crossfading color transition bool enableSecTransition = true; //also enable transition for secondary color uint16_t transitionDelay = 750; //default crossfade duration in ms bool skipFirstLed = false; //ignore first LED in strip (useful if you need the LED as signal repeater) uint8_t disableNLeds = 0; //disables N LEDs between active nodes. (Useful for spacing out lights for more traditional christmas light look) byte briMultiplier = 100; //% of brightness to set (to limit power, if you set it to 50 and set bri to 255, actual brightness will be 127) //User Interface CONFIG char serverDescription[33] = "WLED"; //Name of module bool syncToggleReceive = false; //UIs which only have a single button for sync should toggle send+receive if this is true, only send otherwise //Sync CONFIG bool buttonEnabled = true; bool irEnabled = false; //Infrared receiver uint16_t udpPort = 21324; //WLED notifier default port uint16_t udpRgbPort = 19446; //Hyperion port bool receiveNotificationBrightness = true; //apply brightness from incoming notifications bool receiveNotificationColor = true; //apply color bool receiveNotificationEffects = true; //apply effects setup bool notifyDirect = false; //send notification if change via UI or HTTP API bool notifyButton = false; //send if updated by button or infrared remote bool notifyAlexa = false; //send notification if updated via Alexa bool notifyMacro = false; //send notification for macro bool notifyHue = true; //send notification if Hue light changes bool notifyTwice = false; //notifications use UDP: enable if devices don't sync reliably bool alexaEnabled = true; //enable device discovery by Amazon Echo char alexaInvocationName[33] = "Light"; //speech control name of device. Choose something voice-to-text can understand char blynkApiKey[36] = ""; //Auth token for Blynk server. If empty, no connection will be made uint16_t realtimeTimeoutMs = 2500; //ms timeout of realtime mode before returning to normal mode int arlsOffset = 0; //realtime LED offset bool receiveDirect = true; //receive UDP realtime bool arlsDisableGammaCorrection = true; //activate if gamma correction is handled by the source bool arlsForceMaxBri = false; //enable to force max brightness if source has very dark colors that would be black uint16_t e131Universe = 1; //settings for E1.31 (sACN) protocol bool e131Multicast = false; bool mqttEnabled = false; char mqttDeviceTopic[33] = ""; //main MQTT topic (individual per device, default is wled/mac) char mqttGroupTopic[33] = "wled/all"; //second MQTT topic (for example to group devices) char mqttServer[33] = ""; //both domains and IPs should work (no SSL) char mqttUser[41] = ""; //optional: username for MQTT auth char mqttPass[41] = ""; //optional: password for MQTT auth char mqttClientID[41] = ""; //override the client ID uint16_t mqttPort = 1883; bool huePollingEnabled = false; //poll hue bridge for light state uint16_t huePollIntervalMs = 2500; //low values (< 1sec) may cause lag but offer quicker response char hueApiKey[47] = "api"; //key token will be obtained from bridge byte huePollLightId = 1; //ID of hue lamp to sync to. Find the ID in the hue app ("about" section) IPAddress hueIP = (0,0,0,0); //IP address of the bridge bool hueApplyOnOff = true; bool hueApplyBri = true; bool hueApplyColor = true; //Time CONFIG bool ntpEnabled = false; //get internet time. Only required if you use clock overlays or time-activated macros bool useAMPM = false; //12h/24h clock format byte currentTimezone = 0; //Timezone ID. Refer to timezones array in wled10_ntp.ino int utcOffsetSecs = 0; //Seconds to offset from UTC before timzone calculation byte overlayDefault = 0; //0: no overlay 1: analog clock 2: single-digit clocl 3: cronixie byte overlayMin = 0, overlayMax = ledCount-1; //boundaries of overlay mode byte analogClock12pixel = 0; //The pixel in your strip where "midnight" would be bool analogClockSecondsTrail = false; //Display seconds as trail of LEDs instead of a single pixel bool analogClock5MinuteMarks = false; //Light pixels at every 5-minute position char cronixieDisplay[7] = "HHMMSS"; //Cronixie Display mask. See wled13_cronixie.ino bool cronixieBacklight = true; //Allow digits to be back-illuminated bool countdownMode = false; //Clock will count down towards date byte countdownYear = 20, countdownMonth = 1; //Countdown target date, year is last two digits byte countdownDay = 1, countdownHour = 0; byte countdownMin = 0, countdownSec = 0; byte macroBoot = 0; //macro loaded after startup byte macroNl = 0; //after nightlight delay over byte macroCountdown = 0; byte macroAlexaOn = 0, macroAlexaOff = 0; byte macroButton = 0, macroLongPress = 0, macroDoublePress = 0; //Security CONFIG bool otaLock = false; //prevents OTA firmware updates without password. ALWAYS enable if system exposed to any public networks bool wifiLock = false; //prevents access to WiFi settings when OTA lock is enabled bool aOtaEnabled = true; //ArduinoOTA allows easy updates directly from the IDE. Careful, it does not auto-disable when OTA lock is on uint16_t userVar0 = 0, userVar1 = 0; //internal global variable declarations //wifi bool apActive = false; bool forceReconnect = false; uint32_t lastReconnectAttempt = 0; bool interfacesInited = false; bool wasConnected = false; //color byte colOld[]{0, 0, 0, 0}; //color before transition byte colT[]{0, 0, 0, 0}; //current color byte colIT[]{0, 0, 0, 0}; //color that was last sent to LEDs byte colSecT[]{0, 0, 0, 0}; byte colSecOld[]{0, 0, 0, 0}; byte colSecIT[]{0, 0, 0, 0}; byte lastRandomIndex = 0; //used to save last random color so the new one is not the same //transitions bool transitionActive = false; uint16_t transitionDelayDefault = transitionDelay; uint16_t transitionDelayTemp = transitionDelay; unsigned long transitionStartTime; float tperLast = 0; //crossfade transition progress, 0.0f - 1.0f bool jsonTransitionOnce = false; //nightlight bool nightlightActive = false; bool nightlightActiveOld = false; uint32_t nightlightDelayMs = 10; uint8_t nightlightDelayMinsDefault = nightlightDelayMins; unsigned long nightlightStartTime; byte briNlT = 0; //current nightlight brightness //brightness unsigned long lastOnTime = 0; bool offMode = !turnOnAtBoot; byte bri = briS; byte briOld = 0; byte briT = 0; byte briIT = 0; byte briLast = 128; //brightness before turned off. Used for toggle function //button bool buttonPressedBefore = false; bool buttonLongPressed = false; unsigned long buttonPressedTime = 0; unsigned long buttonWaitTime = 0; //notifications bool notifyDirectDefault = notifyDirect; bool receiveNotifications = true; unsigned long notificationSentTime = 0; byte notificationSentCallMode = 0; bool notificationTwoRequired = false; //effects byte effectCurrent = 0; byte effectSpeed = 128; byte effectIntensity = 128; byte effectPalette = 0; //network bool udpConnected = false, udpRgbConnected = false; //ui style bool showWelcomePage = false; //hue char hueError[25] = "Inactive"; //uint16_t hueFailCount = 0; float hueXLast=0, hueYLast=0; uint16_t hueHueLast=0, hueCtLast=0; byte hueSatLast=0, hueBriLast=0; unsigned long hueLastRequestSent = 0; bool hueAuthRequired = false; bool hueReceived = false; bool hueStoreAllowed = false, hueNewKey = false; //overlays byte overlayCurrent = overlayDefault; byte overlaySpeed = 200; unsigned long overlayRefreshMs = 200; unsigned long overlayRefreshedTime; //cronixie byte dP[]{0,0,0,0,0,0}; bool cronixieInit = false; //countdown unsigned long countdownTime = 1514764800L; bool countdownOverTriggered = true; //timer byte lastTimerMinute = 0; byte timerHours[] = {0,0,0,0,0,0,0,0}; byte timerMinutes[] = {0,0,0,0,0,0,0,0}; byte timerMacro[] = {0,0,0,0,0,0,0,0}; byte timerWeekday[] = {255,255,255,255,255,255,255,255}; //weekdays to activate on //bit pattern of arr elem: 0b11111111: sun,sat,fri,thu,wed,tue,mon,validity //blynk bool blynkEnabled = false; //preset cycling bool presetCyclingEnabled = false; byte presetCycleMin = 1, presetCycleMax = 5; uint16_t presetCycleTime = 1250; unsigned long presetCycledTime = 0; byte presetCycCurr = presetCycleMin; bool presetApplyBri = false, presetApplyCol = true, presetApplyFx = true; bool saveCurrPresetCycConf = false; //realtime bool realtimeActive = false; IPAddress realtimeIP = (0,0,0,0); unsigned long realtimeTimeout = 0; //mqtt long lastMqttReconnectAttempt = 0; long lastInterfaceUpdate = 0; byte interfaceUpdateCallMode = 0; char mqttStatusTopic[40] = ""; //this must be global because of async handlers #if AUXPIN >= 0 //auxiliary debug pin byte auxTime = 0; unsigned long auxStartTime = 0; bool auxActive = false, auxActiveBefore = false; #endif //alexa udp String escapedMac; #ifndef WLED_DISABLE_ALEXA Espalexa espalexa; EspalexaDevice* espalexaDevice; #endif //dns server DNSServer dnsServer; //network time bool ntpConnected = false; time_t local = 0; unsigned long ntpLastSyncTime = 999000000L; unsigned long ntpPacketSentTime = 999000000L; IPAddress ntpServerIP; uint16_t ntpLocalPort = 2390; #define NTP_PACKET_SIZE 48 #define MAX_LEDS 1500 #define MAX_LEDS_DMA 500 //string temp buffer (now stored in stack locally) #define OMAX 2048 char* obuf; uint16_t olen = 0; uint16_t savedPresets = 0; int8_t currentPreset = -1; bool isPreset = false; byte errorFlag = 0; String messageHead, messageSub; byte optionType; bool doReboot = false; //flag to initiate reboot from async handlers bool doPublishMqtt = false; //server library objects AsyncWebServer server(80); AsyncClient* hueClient = NULL; AsyncMqttClient* mqtt = NULL; //function prototypes void colorFromUint32(uint32_t,bool=false); void serveMessage(AsyncWebServerRequest*,uint16_t,String,String,byte); void handleE131Packet(e131_packet_t*, IPAddress); #define E131_MAX_UNIVERSE_COUNT 9 //udp interface objects WiFiUDP notifierUdp, rgbUdp; WiFiUDP ntpUdp; ESPAsyncE131 e131(handleE131Packet); bool e131NewData = false; //led fx library object WS2812FX strip = WS2812FX(); #define WLED_CONNECTED (WiFi.status() == WL_CONNECTED) #define WLED_WIFI_CONFIGURED (strlen(clientSSID) >= 1 && strcmp(clientSSID,"Your_Network") != 0) //debug macros #ifdef WLED_DEBUG #define DEBUG_PRINT(x) Serial.print (x) #define DEBUG_PRINTLN(x) Serial.println (x) #define DEBUG_PRINTF(x) Serial.printf (x) unsigned long debugTime = 0; int lastWifiState = 3; unsigned long wifiStateChangedTime = 0; int loops = 0; #else #define DEBUG_PRINT(x) #define DEBUG_PRINTLN(x) #define DEBUG_PRINTF(x) #endif //filesystem #ifndef WLED_DISABLE_FILESYSTEM #include #ifdef ARDUINO_ARCH_ESP32 #include "SPIFFS.h" #endif #include "SPIFFSEditor.h" #endif //turns all LEDs off and restarts ESP void reset() { briT = 0; long dly = millis(); while(millis() - dly < 250) { yield(); //enough time to send response to client } setAllLeds(); DEBUG_PRINTLN("MODULE RESET"); ESP.restart(); } //append new c string to temp buffer efficiently bool oappend(const char* txt) { uint16_t len = strlen(txt); if (olen + len >= OMAX) return false; //buffer full strcpy(obuf + olen, txt); olen += len; return true; } //append new number to temp buffer efficiently bool oappendi(int i) { char s[11]; sprintf(s,"%ld", i); return oappend(s); } //boot starts here void setup() { wledInit(); } //main program loop void loop() { handleConnection(); handleSerial(); handleNotifications(); handleTransitions(); userLoop(); yield(); handleIO(); handleIR(); handleNetworkTime(); handleAlexa(); handleOverlays(); yield(); if (doReboot) reset(); if (!realtimeActive) //block stuff if WARLS/Adalight is enabled { if (apActive) dnsServer.processNextRequest(); #ifndef WLED_DISABLE_OTA if (WLED_CONNECTED && aOtaEnabled) ArduinoOTA.handle(); #endif handleNightlight(); yield(); handleHue(); handleBlynk(); yield(); if (!offMode) strip.service(); } yield(); if (millis() - lastMqttReconnectAttempt > 30000) initMqtt(); //DEBUG serial logging #ifdef WLED_DEBUG if (millis() - debugTime > 9999) { DEBUG_PRINTLN("---DEBUG INFO---"); DEBUG_PRINT("Runtime: "); DEBUG_PRINTLN(millis()); DEBUG_PRINT("Unix time: "); DEBUG_PRINTLN(now()); DEBUG_PRINT("Free heap: "); DEBUG_PRINTLN(ESP.getFreeHeap()); DEBUG_PRINT("Wifi state: "); DEBUG_PRINTLN(WiFi.status()); if (WiFi.status() != lastWifiState) { wifiStateChangedTime = millis(); } lastWifiState = WiFi.status(); DEBUG_PRINT("State time: "); DEBUG_PRINTLN(wifiStateChangedTime); DEBUG_PRINT("NTP last sync: "); DEBUG_PRINTLN(ntpLastSyncTime); DEBUG_PRINT("Client IP: "); DEBUG_PRINTLN(WiFi.localIP()); DEBUG_PRINT("Loops/sec: "); DEBUG_PRINTLN(loops/10); loops = 0; debugTime = millis(); } loops++; #endif }