//this code is a modified version of https://github.com/Makuna/NeoPixelBus/issues/103
#ifndef NpbWrapper_h
#define NpbWrapper_h

//PIN CONFIGURATION
#ifndef LEDPIN
#define LEDPIN 5      //strip pin. Any for ESP32, gpio2 or 3 is recommended for ESP8266 (gpio2/3 are labeled D4/RX on NodeMCU and Wemos)
#endif
//#define USE_APA102  // Uncomment for using APA102 LEDs.
//#define USE_WS2801  // Uncomment for using WS2801 LEDs (make sure you have NeoPixelBus v2.5.6 or newer)
//#define USE_LPD8806 // Uncomment for using LPD8806
//#define WLED_USE_ANALOG_LEDS //Uncomment for using "dumb" PWM controlled LEDs (see pins below, default R: gpio5, G: 12, B: 15, W: 13)
//#define WLED_USE_H801 //H801 controller. Please uncomment #define WLED_USE_ANALOG_LEDS as well
//#define WLED_USE_5CH_LEDS  //5 Channel H801 for cold and warm white

#ifndef BTNPIN
#define BTNPIN  0  //button pin. Needs to have pullup (gpio0 recommended)
#endif

#ifndef IR_PIN
#define IR_PIN  4  //infrared pin (-1 to disable)  MagicHome: 4, H801 Wifi: 0
#endif

#ifndef RLYPIN
#define RLYPIN 12  //pin for relay, will be set HIGH if LEDs are on (-1 to disable). Also usable for standby leds, triggers,...
#endif

#ifndef AUXPIN
#define AUXPIN -1  //debug auxiliary output pin (-1 to disable)
#endif

#ifndef RLYMDE
#define RLYMDE 1  //mode for relay, 0: LOW if LEDs are on 1: HIGH if LEDs are on
#endif

//END CONFIGURATION

#if defined(USE_APA102) || defined(USE_WS2801) || defined(USE_LPD8806)
 #define CLKPIN 0
 #define DATAPIN 2
 #if BTNPIN == CLKPIN || BTNPIN == DATAPIN
  #undef BTNPIN   // Deactivate button pin if it conflicts with one of the APA102 pins.
 #endif
#endif

#ifdef WLED_USE_ANALOG_LEDS
  //PWM pins - PINs 15,13,12,14 (W2 = 04)are used with H801 Wifi LED Controller
  #ifdef WLED_USE_H801
    #define RPIN 15   //R pin for analog LED strip   
    #define GPIN 13   //G pin for analog LED strip
    #define BPIN 12   //B pin for analog LED strip
    #define WPIN 14   //W pin for analog LED strip 
    #define W2PIN 04  //W2 pin for analog LED strip
    #undef BTNPIN
    #undef IR_PIN
    #define IR_PIN  0 //infrared pin (-1 to disable)  MagicHome: 4, H801 Wifi: 0
  #else
  //PWM pins - PINs 5,12,13,15 are used with Magic Home LED Controller
    #define RPIN 5   //R pin for analog LED strip   
    #define GPIN 12   //G pin for analog LED strip
    #define BPIN 15   //B pin for analog LED strip
    #define WPIN 13   //W pin for analog LED strip 
  #endif
  #undef RLYPIN
  #define RLYPIN -1 //disable as pin 12 is used by analog LEDs
#endif

//automatically uses the right driver method for each platform
#ifdef ARDUINO_ARCH_ESP32
 #ifdef USE_APA102
  #define PIXELMETHOD DotStarMethod
 #elif defined(USE_WS2801)
  #define PIXELMETHOD NeoWs2801Method
 #elif defined(USE_LPD8806)
  #define PIXELMETHOD Lpd8806Method
 #else
  #define PIXELMETHOD NeoEsp32Rmt0Ws2812xMethod
 #endif
#else //esp8266
 //autoselect the right method depending on strip pin
 #ifdef USE_APA102
  #define PIXELMETHOD DotStarMethod
 #elif defined(USE_WS2801)
  #define PIXELMETHOD NeoWs2801Method
 #elif defined(USE_LPD8806)
  #define PIXELMETHOD Lpd8806Method
 #elif LEDPIN == 2
  #define PIXELMETHOD NeoEsp8266Uart1Ws2813Method //if you get an error here, try to change to NeoEsp8266UartWs2813Method or update Neopixelbus
 #elif LEDPIN == 3
  #define PIXELMETHOD NeoEsp8266Dma800KbpsMethod
 #else
  #define PIXELMETHOD NeoEsp8266BitBang800KbpsMethod
  #pragma message "Software BitBang will be used because of your selected LED pin. This may cause flicker. Use GPIO 2 or 3 for best results."
 #endif
#endif


//you can now change the color order in the web settings
#ifdef USE_APA102
 #define PIXELFEATURE3 DotStarBgrFeature
 #define PIXELFEATURE4 DotStarLbgrFeature
#elif defined(USE_LPD8806)
 #define PIXELFEATURE3 Lpd8806GrbFeature 
 #define PIXELFEATURE4 Lpd8806GrbFeature 
#else
 #define PIXELFEATURE3 NeoGrbFeature
 #define PIXELFEATURE4 NeoGrbwFeature
#endif


#include <NeoPixelBrightnessBus.h>

enum NeoPixelType
{
  NeoPixelType_None = 0,
  NeoPixelType_Grb  = 1,
  NeoPixelType_Grbw = 2,
  NeoPixelType_End  = 3
};

class NeoPixelWrapper
{
public:
  NeoPixelWrapper() :
    // initialize each member to null
    _pGrb(NULL),
    _pGrbw(NULL),
    _type(NeoPixelType_None)
  {

  }

  ~NeoPixelWrapper()
  {
    cleanup();
  }

  void Begin(NeoPixelType type, uint16_t countPixels)
  {
    cleanup();
    _type = type;

    switch (_type)
    {
      case NeoPixelType_Grb:
      #if defined(USE_APA102) || defined(USE_WS2801) || defined(USE_LPD8806)
        _pGrb = new NeoPixelBrightnessBus<PIXELFEATURE3,PIXELMETHOD>(countPixels, CLKPIN, DATAPIN);
      #else
        _pGrb = new NeoPixelBrightnessBus<PIXELFEATURE3,PIXELMETHOD>(countPixels, LEDPIN);
      #endif
        _pGrb->Begin();
      break;

      case NeoPixelType_Grbw:
      #if defined(USE_APA102) || defined(USE_WS2801) || defined(USE_LPD8806)
        _pGrbw = new NeoPixelBrightnessBus<PIXELFEATURE4,PIXELMETHOD>(countPixels, CLKPIN, DATAPIN);
      #else
        _pGrbw = new NeoPixelBrightnessBus<PIXELFEATURE4,PIXELMETHOD>(countPixels, LEDPIN);
      #endif
        _pGrbw->Begin();
      break;
    }

    #ifdef WLED_USE_ANALOG_LEDS 
      #ifdef ARDUINO_ARCH_ESP32
        ledcSetup(0, 5000, 8);
        ledcAttachPin(RPIN, 0);
        ledcSetup(1, 5000, 8);
        ledcAttachPin(GPIN, 1);
        ledcSetup(2, 5000, 8);        
        ledcAttachPin(BPIN, 2);
        if(_type == NeoPixelType_Grbw) 
        {
          ledcSetup(3, 5000, 8);        
          ledcAttachPin(WPIN, 3);
          #ifdef WLED_USE_5CH_LEDS
            ledcSetup(4, 5000, 8);        
            ledcAttachPin(W2PIN, 4);
          #endif
        }
      #else  // ESP8266
        //init PWM pins
        pinMode(RPIN, OUTPUT);
        pinMode(GPIN, OUTPUT);
        pinMode(BPIN, OUTPUT); 
        if(_type == NeoPixelType_Grbw) 
        {
          pinMode(WPIN, OUTPUT); 
          #ifdef WLED_USE_5CH_LEDS
            pinMode(W2PIN, OUTPUT);
          #endif
        }
        analogWriteRange(255);  //same range as one RGB channel
        analogWriteFreq(880);   //PWM frequency proven as good for LEDs
      #endif 
    #endif
  }

#ifdef WLED_USE_ANALOG_LEDS      
    void SetRgbwPwm(uint8_t r, uint8_t g, uint8_t b, uint8_t w, uint8_t w2=0)
    {
      #ifdef ARDUINO_ARCH_ESP32
        ledcWrite(0, r);
        ledcWrite(1, g);
        ledcWrite(2, b);
        switch (_type) {
          case NeoPixelType_Grb:                                                  break;
          #ifdef WLED_USE_5CH_LEDS
            case NeoPixelType_Grbw: ledcWrite(3, w); ledcWrite(4, w2);            break;
          #else
            case NeoPixelType_Grbw: ledcWrite(3, w);                              break;
          #endif
        }        
      #else   // ESP8266
        analogWrite(RPIN, r);
        analogWrite(GPIN, g);
        analogWrite(BPIN, b);
        switch (_type) {
          case NeoPixelType_Grb:                                                  break;
          #ifdef WLED_USE_5CH_LEDS
            case NeoPixelType_Grbw: analogWrite(WPIN, w); analogWrite(W2PIN, w2); break;
          #else
            case NeoPixelType_Grbw: analogWrite(WPIN, w);                         break;
          #endif
        }
      #endif 
    }
#endif

  void Show()
  {
    byte b;
    switch (_type)
    {
      case NeoPixelType_Grb:  _pGrb->Show();  break;
      case NeoPixelType_Grbw: _pGrbw->Show(); break;
    }
  }

  void SetPixelColor(uint16_t indexPixel, RgbwColor color)
  {
    switch (_type) {
      case NeoPixelType_Grb: {
        _pGrb->SetPixelColor(indexPixel, RgbColor(color.R,color.G,color.B));
      }
      break;
      case NeoPixelType_Grbw: {
        #ifdef USE_LPD8806
        _pGrbw->SetPixelColor(indexPixel, RgbColor(color.R,color.G,color.B));
        #else
        _pGrbw->SetPixelColor(indexPixel, color);
        #endif
      }
      break;
    }
    
  }

  void SetBrightness(byte b)
  {
    switch (_type) {
      case NeoPixelType_Grb: _pGrb->SetBrightness(b);   break;
      case NeoPixelType_Grbw:_pGrbw->SetBrightness(b);  break;
    }
  }

  // NOTE:  Due to feature differences, some support RGBW but the method name
  // here needs to be unique, thus GetPixeColorRgbw
  RgbwColor GetPixelColorRgbw(uint16_t indexPixel) const
  {
    switch (_type) {
      case NeoPixelType_Grb:  return _pGrb->GetPixelColor(indexPixel);  break;
      case NeoPixelType_Grbw: return _pGrbw->GetPixelColor(indexPixel); break;
    }
    return 0;
  }

  uint8_t* GetPixels(void)
  {
    switch (_type) {
      case NeoPixelType_Grb:  return _pGrb->Pixels();  break;
      case NeoPixelType_Grbw: return _pGrbw->Pixels(); break;
    }
    return 0;
  }


private:
  NeoPixelType _type;

  // have a member for every possible type
  NeoPixelBrightnessBus<PIXELFEATURE3,PIXELMETHOD>*  _pGrb;
  NeoPixelBrightnessBus<PIXELFEATURE4,PIXELMETHOD>* _pGrbw;

  void cleanup()
  {
    switch (_type) {
      case NeoPixelType_Grb:  delete _pGrb ; _pGrb  = NULL; break;
      case NeoPixelType_Grbw: delete _pGrbw; _pGrbw = NULL; break;
    }
  }
};
#endif