169 lines
5.4 KiB
C++
169 lines
5.4 KiB
C++
#ifndef WLED_ENABLE_MQTT
|
|
#error "This user mod requires MQTT to be enabled."
|
|
#endif
|
|
|
|
#include "wled.h"
|
|
#include <Arduino.h>
|
|
#include <U8x8lib.h> // from https://github.com/olikraus/u8g2/
|
|
#include <DallasTemperature.h> //Dallastemperature sensor
|
|
//The SCL and SDA pins are defined here.
|
|
//Lolin32 boards use SCL=5 SDA=4
|
|
#define U8X8_PIN_SCL 5
|
|
#define U8X8_PIN_SDA 4
|
|
// Dallas sensor
|
|
OneWire oneWire(13);
|
|
DallasTemperature sensor(&oneWire);
|
|
long temptimer = millis();
|
|
long lastMeasure = 0;
|
|
#define Celsius // Show temperature mesaurement in Celcius otherwise is in Fahrenheit
|
|
|
|
// If display does not work or looks corrupted check the
|
|
// constructor reference:
|
|
// https://github.com/olikraus/u8g2/wiki/u8x8setupcpp
|
|
// or check the gallery:
|
|
// https://github.com/olikraus/u8g2/wiki/gallery
|
|
// --> First choise of cheap I2C OLED 128X32 0.91"
|
|
U8X8_SSD1306_128X32_UNIVISION_HW_I2C u8x8(U8X8_PIN_NONE, U8X8_PIN_SCL, U8X8_PIN_SDA); // Pins are Reset, SCL, SDA
|
|
// --> Second choise of cheap I2C OLED 128X64 0.96" or 1.3"
|
|
//U8X8_SSD1306_128X64_NONAME_HW_I2C u8x8(U8X8_PIN_NONE, U8X8_PIN_SCL, U8X8_PIN_SDA); // Pins are Reset, SCL, SDA
|
|
// gets called once at boot. Do all initialization that doesn't depend on
|
|
// network here
|
|
void userSetup() {
|
|
sensor.begin(); //Start Dallas temperature sensor
|
|
u8x8.begin();
|
|
//u8x8.setFlipMode(1); //Uncoment if using WLED Wemos shield
|
|
u8x8.setPowerSave(0);
|
|
u8x8.setContrast(10); //Contrast setup will help to preserve OLED lifetime. In case OLED need to be brighter increase number up to 255
|
|
u8x8.setFont(u8x8_font_chroma48medium8_r);
|
|
u8x8.drawString(0, 0, "Loading...");
|
|
}
|
|
|
|
// gets called every time WiFi is (re-)connected. Initialize own network
|
|
// interfaces here
|
|
void userConnected() {}
|
|
|
|
// needRedraw marks if redraw is required to prevent often redrawing.
|
|
bool needRedraw = true;
|
|
|
|
// Next variables hold the previous known values to determine if redraw is
|
|
// required.
|
|
String knownSsid = "";
|
|
IPAddress knownIp;
|
|
uint8_t knownBrightness = 0;
|
|
uint8_t knownMode = 0;
|
|
uint8_t knownPalette = 0;
|
|
|
|
long lastUpdate = 0;
|
|
long lastRedraw = 0;
|
|
bool displayTurnedOff = false;
|
|
// How often we are redrawing screen
|
|
#define USER_LOOP_REFRESH_RATE_MS 5000
|
|
|
|
void userLoop() {
|
|
|
|
//----> Dallas temperature sensor MQTT publishing
|
|
temptimer = millis();
|
|
// Timer to publishe new temperature every 60 seconds
|
|
if (temptimer - lastMeasure > 60000)
|
|
{
|
|
lastMeasure = temptimer;
|
|
//Check if MQTT Connected, otherwise it will crash the 8266
|
|
if (mqtt != nullptr)
|
|
{
|
|
sensor.requestTemperatures();
|
|
//Gets prefered temperature scale based on selection in definitions section
|
|
#ifdef Celsius
|
|
float board_temperature = sensor.getTempCByIndex(0);
|
|
#else
|
|
float board_temperature = sensor.getTempFByIndex(0);
|
|
#endif
|
|
//Create character string populated with user defined device topic from the UI, and the read temperature. Then publish to MQTT server.
|
|
char subuf[38];
|
|
strcpy(subuf, mqttDeviceTopic);
|
|
strcat(subuf, "/temperature");
|
|
mqtt->publish(subuf, 0, true, String(board_temperature).c_str());
|
|
}
|
|
}
|
|
|
|
// Check if we time interval for redrawing passes.
|
|
if (millis() - lastUpdate < USER_LOOP_REFRESH_RATE_MS) {
|
|
return;
|
|
}
|
|
lastUpdate = millis();
|
|
|
|
// Turn off display after 3 minutes with no change.
|
|
if(!displayTurnedOff && millis() - lastRedraw > 3*60*1000) {
|
|
u8x8.setPowerSave(1);
|
|
displayTurnedOff = true;
|
|
}
|
|
|
|
// Check if values which are shown on display changed from the last time.
|
|
if (((apActive) ? String(apSSID) : WiFi.SSID()) != knownSsid) {
|
|
needRedraw = true;
|
|
} else if (knownIp != (apActive ? IPAddress(4, 3, 2, 1) : WiFi.localIP())) {
|
|
needRedraw = true;
|
|
} else if (knownBrightness != bri) {
|
|
needRedraw = true;
|
|
} else if (knownMode != strip.getMainSegment().mode) {
|
|
needRedraw = true;
|
|
} else if (knownPalette != strip.getMainSegment().palette) {
|
|
needRedraw = true;
|
|
}
|
|
|
|
if (!needRedraw) {
|
|
return;
|
|
}
|
|
needRedraw = false;
|
|
|
|
if (displayTurnedOff)
|
|
{
|
|
u8x8.setPowerSave(0);
|
|
displayTurnedOff = false;
|
|
}
|
|
lastRedraw = millis();
|
|
|
|
// Update last known values.
|
|
#if defined(ESP8266)
|
|
knownSsid = apActive ? WiFi.softAPSSID() : WiFi.SSID();
|
|
#else
|
|
knownSsid = WiFi.SSID();
|
|
#endif
|
|
knownIp = apActive ? IPAddress(4, 3, 2, 1) : WiFi.localIP();
|
|
knownBrightness = bri;
|
|
knownMode = strip.getMainSegment().mode;
|
|
knownPalette = strip.getMainSegment().palette;
|
|
u8x8.clear();
|
|
u8x8.setFont(u8x8_font_chroma48medium8_r);
|
|
|
|
// First row with Wifi name
|
|
u8x8.setCursor(1, 0);
|
|
u8x8.print(knownSsid.substring(0, u8x8.getCols() > 1 ? u8x8.getCols() - 2 : 0));
|
|
// Print `~` char to indicate that SSID is longer, than owr dicplay
|
|
if (knownSsid.length() > u8x8.getCols())
|
|
u8x8.print("~");
|
|
|
|
// Second row with IP or Psssword
|
|
u8x8.setCursor(1, 1);
|
|
// Print password in AP mode and if led is OFF.
|
|
if (apActive && bri == 0)
|
|
u8x8.print(apPass);
|
|
else
|
|
u8x8.print(knownIp);
|
|
|
|
// Third row with mode name
|
|
u8x8.setCursor(2, 2);
|
|
char lineBuffer[17];
|
|
extractModeName(knownMode, JSON_mode_names, lineBuffer, 16);
|
|
u8x8.print(lineBuffer);
|
|
|
|
// Fourth row with palette name
|
|
u8x8.setCursor(2, 3);
|
|
extractModeName(knownPalette, JSON_palette_names, lineBuffer, 16);
|
|
u8x8.print(lineBuffer);
|
|
|
|
u8x8.setFont(u8x8_font_open_iconic_embedded_1x1);
|
|
u8x8.drawGlyph(0, 0, 80); // wifi icon
|
|
u8x8.drawGlyph(0, 1, 68); // home icon
|
|
u8x8.setFont(u8x8_font_open_iconic_weather_2x2);
|
|
u8x8.drawGlyph(0, 2, 66 + (bri > 0 ? 3 : 0)); // sun/moon icon
|
|
} |