539 lines
20 KiB
C++
539 lines
20 KiB
C++
/*
|
|
* Usermod for detecting people entering/leaving a staircase and switching the
|
|
* staircase on/off.
|
|
*
|
|
* Edit the Animated_Staircase_config.h file to compile this usermod for your
|
|
* specific configuration.
|
|
*
|
|
* See the accompanying README.md file for more info.
|
|
*/
|
|
#pragma once
|
|
#include "wled.h"
|
|
|
|
class Animated_Staircase : public Usermod {
|
|
private:
|
|
|
|
/* configuration (available in API and stored in flash) */
|
|
bool enabled = false; // Enable this usermod
|
|
unsigned long segment_delay_ms = 150; // Time between switching each segment
|
|
unsigned long on_time_ms = 30000; // The time for the light to stay on
|
|
int8_t topPIRorTriggerPin = -1; // disabled
|
|
int8_t bottomPIRorTriggerPin = -1; // disabled
|
|
int8_t topEchoPin = -1; // disabled
|
|
int8_t bottomEchoPin = -1; // disabled
|
|
bool useUSSensorTop = false; // using PIR or UltraSound sensor?
|
|
bool useUSSensorBottom = false; // using PIR or UltraSound sensor?
|
|
unsigned int topMaxDist = 50; // default maximum measured distance in cm, top
|
|
unsigned int bottomMaxDist = 50; // default maximum measured distance in cm, bottom
|
|
|
|
/* runtime variables */
|
|
bool initDone = false;
|
|
|
|
// Time between checking of the sensors
|
|
const unsigned int scanDelay = 100;
|
|
|
|
// Lights on or off.
|
|
// Flipping this will start a transition.
|
|
bool on = false;
|
|
|
|
// Swipe direction for current transition
|
|
#define SWIPE_UP true
|
|
#define SWIPE_DOWN false
|
|
bool swipe = SWIPE_UP;
|
|
|
|
// Indicates which Sensor was seen last (to determine
|
|
// the direction when swiping off)
|
|
#define LOWER false
|
|
#define UPPER true
|
|
bool lastSensor = LOWER;
|
|
|
|
// Time of the last transition action
|
|
unsigned long lastTime = 0;
|
|
|
|
// Time of the last sensor check
|
|
unsigned long lastScanTime = 0;
|
|
|
|
// Last time the lights were switched on or off
|
|
unsigned long lastSwitchTime = 0;
|
|
|
|
// segment id between onIndex and offIndex are on.
|
|
// controll the swipe by setting/moving these indices around.
|
|
// onIndex must be less than or equal to offIndex
|
|
byte onIndex = 0;
|
|
byte offIndex = 0;
|
|
|
|
// The maximum number of configured segments.
|
|
// Dynamically updated based on user configuration.
|
|
byte maxSegmentId = 1;
|
|
byte mainSegmentId = 0;
|
|
|
|
// These values are used by the API to read the
|
|
// last sensor state, or trigger a sensor
|
|
// through the API
|
|
bool topSensorRead = false;
|
|
bool topSensorWrite = false;
|
|
bool bottomSensorRead = false;
|
|
bool bottomSensorWrite = false;
|
|
bool topSensorState = false;
|
|
bool bottomSensorState = false;
|
|
|
|
// strings to reduce flash memory usage (used more than twice)
|
|
static const char _name[];
|
|
static const char _enabled[];
|
|
static const char _segmentDelay[];
|
|
static const char _onTime[];
|
|
static const char _useTopUltrasoundSensor[];
|
|
static const char _topPIRorTrigger_pin[];
|
|
static const char _topEcho_pin[];
|
|
static const char _useBottomUltrasoundSensor[];
|
|
static const char _bottomPIRorTrigger_pin[];
|
|
static const char _bottomEcho_pin[];
|
|
static const char _topEchoCm[];
|
|
static const char _bottomEchoCm[];
|
|
|
|
void publishMqtt(bool bottom, const char* state)
|
|
{
|
|
//Check if MQTT Connected, otherwise it will crash the 8266
|
|
if (WLED_MQTT_CONNECTED){
|
|
char subuf[64];
|
|
sprintf_P(subuf, PSTR("%s/motion/%d"), mqttDeviceTopic, (int)bottom);
|
|
mqtt->publish(subuf, 0, false, state);
|
|
}
|
|
}
|
|
|
|
void updateSegments() {
|
|
mainSegmentId = strip.getMainSegmentId();
|
|
WS2812FX::Segment* segments = strip.getSegments();
|
|
for (int i = 0; i < MAX_NUM_SEGMENTS; i++, segments++) {
|
|
if (!segments->isActive()) {
|
|
maxSegmentId = i - 1;
|
|
break;
|
|
}
|
|
|
|
if (i >= onIndex && i < offIndex) {
|
|
segments->setOption(SEG_OPTION_ON, 1, i);
|
|
|
|
// We may need to copy mode and colors from segment 0 to make sure
|
|
// changes are propagated even when the config is changed during a wipe
|
|
// segments->mode = mainsegment.mode;
|
|
// segments->colors[0] = mainsegment.colors[0];
|
|
} else {
|
|
segments->setOption(SEG_OPTION_ON, 0, i);
|
|
}
|
|
// Always mark segments as "transitional", we are animating the staircase
|
|
segments->setOption(SEG_OPTION_TRANSITIONAL, 1, i);
|
|
}
|
|
colorUpdated(CALL_MODE_DIRECT_CHANGE);
|
|
}
|
|
|
|
/*
|
|
* Detects if an object is within ultrasound range.
|
|
* signalPin: The pin where the pulse is sent
|
|
* echoPin: The pin where the echo is received
|
|
* maxTimeUs: Detection timeout in microseconds. If an echo is
|
|
* received within this time, an object is detected
|
|
* and the function will return true.
|
|
*
|
|
* The speed of sound is 343 meters per second at 20 degress Celcius.
|
|
* Since the sound has to travel back and forth, the detection
|
|
* distance for the sensor in cm is (0.0343 * maxTimeUs) / 2.
|
|
*
|
|
* For practical reasons, here are some useful distances:
|
|
*
|
|
* Distance = maxtime
|
|
* 5 cm = 292 uS
|
|
* 10 cm = 583 uS
|
|
* 20 cm = 1166 uS
|
|
* 30 cm = 1749 uS
|
|
* 50 cm = 2915 uS
|
|
* 100 cm = 5831 uS
|
|
*/
|
|
bool ultrasoundRead(int8_t signalPin, int8_t echoPin, unsigned int maxTimeUs) {
|
|
if (signalPin<0 || echoPin<0) return false;
|
|
digitalWrite(signalPin, LOW);
|
|
delayMicroseconds(2);
|
|
digitalWrite(signalPin, HIGH);
|
|
delayMicroseconds(10);
|
|
digitalWrite(signalPin, LOW);
|
|
return pulseIn(echoPin, HIGH, maxTimeUs) > 0;
|
|
}
|
|
|
|
bool checkSensors() {
|
|
bool sensorChanged = false;
|
|
|
|
if ((millis() - lastScanTime) > scanDelay) {
|
|
lastScanTime = millis();
|
|
|
|
bottomSensorRead = bottomSensorWrite ||
|
|
(!useUSSensorBottom ?
|
|
(bottomPIRorTriggerPin<0 ? false : digitalRead(bottomPIRorTriggerPin)) :
|
|
ultrasoundRead(bottomPIRorTriggerPin, bottomEchoPin, bottomMaxDist*59) // cm to us
|
|
);
|
|
topSensorRead = topSensorWrite ||
|
|
(!useUSSensorTop ?
|
|
(topPIRorTriggerPin<0 ? false : digitalRead(topPIRorTriggerPin)) :
|
|
ultrasoundRead(topPIRorTriggerPin, topEchoPin, topMaxDist*59) // cm to us
|
|
);
|
|
|
|
if (bottomSensorRead != bottomSensorState) {
|
|
bottomSensorState = bottomSensorRead; // change previous state
|
|
sensorChanged = true;
|
|
publishMqtt(true, bottomSensorState ? "on" : "off");
|
|
DEBUG_PRINTLN(F("Bottom sensor changed."));
|
|
}
|
|
|
|
if (topSensorRead != topSensorState) {
|
|
topSensorState = topSensorRead; // change previous state
|
|
sensorChanged = true;
|
|
publishMqtt(false, topSensorState ? "on" : "off");
|
|
DEBUG_PRINTLN(F("Top sensor changed."));
|
|
}
|
|
|
|
// Values read, reset the flags for next API call
|
|
topSensorWrite = false;
|
|
bottomSensorWrite = false;
|
|
|
|
if (topSensorRead != bottomSensorRead) {
|
|
lastSwitchTime = millis();
|
|
|
|
if (on) {
|
|
lastSensor = topSensorRead;
|
|
} else {
|
|
// If the bottom sensor triggered, we need to swipe up, ON
|
|
swipe = bottomSensorRead;
|
|
|
|
DEBUG_PRINT(F("ON -> Swipe "));
|
|
DEBUG_PRINTLN(swipe ? F("up.") : F("down."));
|
|
|
|
if (onIndex == offIndex) {
|
|
// Position the indices for a correct on-swipe
|
|
if (swipe == SWIPE_UP) {
|
|
onIndex = mainSegmentId;
|
|
} else {
|
|
onIndex = maxSegmentId+1;
|
|
}
|
|
offIndex = onIndex;
|
|
}
|
|
on = true;
|
|
}
|
|
}
|
|
}
|
|
return sensorChanged;
|
|
}
|
|
|
|
void autoPowerOff() {
|
|
if (on && ((millis() - lastSwitchTime) > on_time_ms)) {
|
|
// if sensors are still on, do nothing
|
|
if (bottomSensorState || topSensorState) return;
|
|
|
|
// Swipe OFF in the direction of the last sensor detection
|
|
swipe = lastSensor;
|
|
on = false;
|
|
|
|
DEBUG_PRINT(F("OFF -> Swipe "));
|
|
DEBUG_PRINTLN(swipe ? F("up.") : F("down."));
|
|
}
|
|
}
|
|
|
|
void updateSwipe() {
|
|
if ((millis() - lastTime) > segment_delay_ms) {
|
|
lastTime = millis();
|
|
|
|
if (on) {
|
|
// Turn on all segments
|
|
onIndex = MAX(mainSegmentId, onIndex - 1);
|
|
offIndex = MIN(maxSegmentId + 1, offIndex + 1);
|
|
} else {
|
|
if (swipe == SWIPE_UP) {
|
|
onIndex = MIN(offIndex, onIndex + 1);
|
|
} else {
|
|
offIndex = MAX(onIndex, offIndex - 1);
|
|
}
|
|
}
|
|
updateSegments();
|
|
}
|
|
}
|
|
|
|
// send sesnor values to JSON API
|
|
void writeSensorsToJson(JsonObject& staircase) {
|
|
staircase[F("top-sensor")] = topSensorRead;
|
|
staircase[F("bottom-sensor")] = bottomSensorRead;
|
|
}
|
|
|
|
// allow overrides from JSON API
|
|
void readSensorsFromJson(JsonObject& staircase) {
|
|
bottomSensorWrite = bottomSensorState || (staircase[F("bottom-sensor")].as<bool>());
|
|
topSensorWrite = topSensorState || (staircase[F("top-sensor")].as<bool>());
|
|
}
|
|
|
|
void enable(bool enable) {
|
|
if (enable) {
|
|
DEBUG_PRINTLN(F("Animated Staircase enabled."));
|
|
DEBUG_PRINT(F("Delay between steps: "));
|
|
DEBUG_PRINT(segment_delay_ms);
|
|
DEBUG_PRINT(F(" milliseconds.\nStairs switch off after: "));
|
|
DEBUG_PRINT(on_time_ms / 1000);
|
|
DEBUG_PRINTLN(F(" seconds."));
|
|
|
|
if (!useUSSensorBottom)
|
|
pinMode(bottomPIRorTriggerPin, INPUT_PULLUP);
|
|
else {
|
|
pinMode(bottomPIRorTriggerPin, OUTPUT);
|
|
pinMode(bottomEchoPin, INPUT);
|
|
}
|
|
|
|
if (!useUSSensorTop)
|
|
pinMode(topPIRorTriggerPin, INPUT_PULLUP);
|
|
else {
|
|
pinMode(topPIRorTriggerPin, OUTPUT);
|
|
pinMode(topEchoPin, INPUT);
|
|
}
|
|
} else {
|
|
// Restore segment options
|
|
WS2812FX::Segment* segments = strip.getSegments();
|
|
for (int i = 0; i < MAX_NUM_SEGMENTS; i++, segments++) {
|
|
if (!segments->isActive()) {
|
|
maxSegmentId = i - 1;
|
|
break;
|
|
}
|
|
segments->setOption(SEG_OPTION_ON, 1, i);
|
|
}
|
|
colorUpdated(CALL_MODE_DIRECT_CHANGE);
|
|
DEBUG_PRINTLN(F("Animated Staircase disabled."));
|
|
}
|
|
enabled = enable;
|
|
}
|
|
|
|
public:
|
|
void setup() {
|
|
// standardize invalid pin numbers to -1
|
|
if (topPIRorTriggerPin < 0) topPIRorTriggerPin = -1;
|
|
if (topEchoPin < 0) topEchoPin = -1;
|
|
if (bottomPIRorTriggerPin < 0) bottomPIRorTriggerPin = -1;
|
|
if (bottomEchoPin < 0) bottomEchoPin = -1;
|
|
// allocate pins
|
|
PinManagerPinType pins[4] = {
|
|
{ topPIRorTriggerPin, useUSSensorTop },
|
|
{ topEchoPin, false },
|
|
{ bottomPIRorTriggerPin, useUSSensorBottom },
|
|
{ bottomEchoPin, false },
|
|
};
|
|
// NOTE: this *WILL* return TRUE if all the pins are set to -1.
|
|
// this is *BY DESIGN*.
|
|
if (!pinManager.allocateMultiplePins(pins, 4, PinOwner::UM_AnimatedStaircase)) {
|
|
topPIRorTriggerPin = -1;
|
|
topEchoPin = -1;
|
|
bottomPIRorTriggerPin = -1;
|
|
bottomEchoPin = -1;
|
|
enabled = false;
|
|
}
|
|
enable(enabled);
|
|
initDone = true;
|
|
}
|
|
|
|
void loop() {
|
|
if (!enabled || strip.isUpdating()) return;
|
|
checkSensors();
|
|
autoPowerOff();
|
|
updateSwipe();
|
|
}
|
|
|
|
uint16_t getId() { return USERMOD_ID_ANIMATED_STAIRCASE; }
|
|
|
|
/**
|
|
* handling of MQTT message
|
|
* topic only contains stripped topic (part after /wled/MAC)
|
|
* topic should look like: /swipe with amessage of [up|down]
|
|
*/
|
|
bool onMqttMessage(char* topic, char* payload) {
|
|
if (strlen(topic) == 6 && strncmp_P(topic, PSTR("/swipe"), 6) == 0) {
|
|
String action = payload;
|
|
if (action == "up") {
|
|
bottomSensorWrite = true;
|
|
return true;
|
|
} else if (action == "down") {
|
|
topSensorWrite = true;
|
|
return true;
|
|
} else if (action == "on") {
|
|
enable(true);
|
|
return true;
|
|
} else if (action == "off") {
|
|
enable(false);
|
|
return true;
|
|
}
|
|
}
|
|
return false;
|
|
}
|
|
|
|
/**
|
|
* subscribe to MQTT topic for controlling usermod
|
|
*/
|
|
void onMqttConnect(bool sessionPresent) {
|
|
//(re)subscribe to required topics
|
|
char subuf[64];
|
|
if (mqttDeviceTopic[0] != 0) {
|
|
strcpy(subuf, mqttDeviceTopic);
|
|
strcat_P(subuf, PSTR("/swipe"));
|
|
mqtt->subscribe(subuf, 0);
|
|
}
|
|
}
|
|
|
|
void addToJsonState(JsonObject& root) {
|
|
JsonObject staircase = root[FPSTR(_name)];
|
|
if (staircase.isNull()) {
|
|
staircase = root.createNestedObject(FPSTR(_name));
|
|
}
|
|
writeSensorsToJson(staircase);
|
|
DEBUG_PRINTLN(F("Staircase sensor state exposed in API."));
|
|
}
|
|
|
|
/*
|
|
* Reads configuration settings from the json API.
|
|
* See void addToJsonState(JsonObject& root)
|
|
*/
|
|
void readFromJsonState(JsonObject& root) {
|
|
if (!initDone) return; // prevent crash on boot applyPreset()
|
|
JsonObject staircase = root[FPSTR(_name)];
|
|
if (!staircase.isNull()) {
|
|
if (staircase[FPSTR(_enabled)].is<bool>()) {
|
|
enabled = staircase[FPSTR(_enabled)].as<bool>();
|
|
} else {
|
|
String str = staircase[FPSTR(_enabled)]; // checkbox -> off or on
|
|
enabled = (bool)(str!="off"); // off is guaranteed to be present
|
|
}
|
|
readSensorsFromJson(staircase);
|
|
DEBUG_PRINTLN(F("Staircase sensor state read from API."));
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Writes the configuration to internal flash memory.
|
|
*/
|
|
void addToConfig(JsonObject& root) {
|
|
JsonObject staircase = root[FPSTR(_name)];
|
|
if (staircase.isNull()) {
|
|
staircase = root.createNestedObject(FPSTR(_name));
|
|
}
|
|
staircase[FPSTR(_enabled)] = enabled;
|
|
staircase[FPSTR(_segmentDelay)] = segment_delay_ms;
|
|
staircase[FPSTR(_onTime)] = on_time_ms / 1000;
|
|
staircase[FPSTR(_useTopUltrasoundSensor)] = useUSSensorTop;
|
|
staircase[FPSTR(_topPIRorTrigger_pin)] = topPIRorTriggerPin;
|
|
staircase[FPSTR(_topEcho_pin)] = useUSSensorTop ? topEchoPin : -1;
|
|
staircase[FPSTR(_useBottomUltrasoundSensor)] = useUSSensorBottom;
|
|
staircase[FPSTR(_bottomPIRorTrigger_pin)] = bottomPIRorTriggerPin;
|
|
staircase[FPSTR(_bottomEcho_pin)] = useUSSensorBottom ? bottomEchoPin : -1;
|
|
staircase[FPSTR(_topEchoCm)] = topMaxDist;
|
|
staircase[FPSTR(_bottomEchoCm)] = bottomMaxDist;
|
|
DEBUG_PRINTLN(F("Staircase config saved."));
|
|
}
|
|
|
|
/*
|
|
* Reads the configuration to internal flash memory before setup() is called.
|
|
*
|
|
* The function should return true if configuration was successfully loaded or false if there was no configuration.
|
|
*/
|
|
bool readFromConfig(JsonObject& root) {
|
|
bool oldUseUSSensorTop = useUSSensorTop;
|
|
bool oldUseUSSensorBottom = useUSSensorBottom;
|
|
int8_t oldTopAPin = topPIRorTriggerPin;
|
|
int8_t oldTopBPin = topEchoPin;
|
|
int8_t oldBottomAPin = bottomPIRorTriggerPin;
|
|
int8_t oldBottomBPin = bottomEchoPin;
|
|
|
|
JsonObject top = root[FPSTR(_name)];
|
|
if (top.isNull()) {
|
|
DEBUG_PRINT(FPSTR(_name));
|
|
DEBUG_PRINTLN(F(": No config found. (Using defaults.)"));
|
|
return false;
|
|
}
|
|
|
|
enabled = top[FPSTR(_enabled)] | enabled;
|
|
|
|
segment_delay_ms = top[FPSTR(_segmentDelay)] | segment_delay_ms;
|
|
segment_delay_ms = (unsigned long) min((unsigned long)10000,max((unsigned long)10,(unsigned long)segment_delay_ms)); // max delay 10s
|
|
|
|
on_time_ms = top[FPSTR(_onTime)] | on_time_ms/1000;
|
|
on_time_ms = min(900,max(10,(int)on_time_ms)) * 1000; // min 10s, max 15min
|
|
|
|
useUSSensorTop = top[FPSTR(_useTopUltrasoundSensor)] | useUSSensorTop;
|
|
topPIRorTriggerPin = top[FPSTR(_topPIRorTrigger_pin)] | topPIRorTriggerPin;
|
|
// topPIRorTriggerPin = min(33,max(-1,(int)topPIRorTriggerPin)); // bounds check
|
|
topEchoPin = top[FPSTR(_topEcho_pin)] | topEchoPin;
|
|
// topEchoPin = min(39,max(-1,(int)topEchoPin)); // bounds check
|
|
|
|
useUSSensorBottom = top[FPSTR(_useBottomUltrasoundSensor)] | useUSSensorBottom;
|
|
bottomPIRorTriggerPin = top[FPSTR(_bottomPIRorTrigger_pin)] | bottomPIRorTriggerPin;
|
|
// bottomPIRorTriggerPin = min(33,max(-1,(int)bottomPIRorTriggerPin)); // bounds check
|
|
bottomEchoPin = top[FPSTR(_bottomEcho_pin)] | bottomEchoPin;
|
|
// bottomEchoPin = min(39,max(-1,(int)bottomEchoPin)); // bounds check
|
|
|
|
topMaxDist = top[FPSTR(_topEchoCm)] | topMaxDist;
|
|
topMaxDist = min(150,max(30,(int)topMaxDist)); // max distnace ~1.5m (a lag of 9ms may be expected)
|
|
bottomMaxDist = top[FPSTR(_bottomEchoCm)] | bottomMaxDist;
|
|
bottomMaxDist = min(150,max(30,(int)bottomMaxDist)); // max distance ~1.5m (a lag of 9ms may be expected)
|
|
|
|
DEBUG_PRINT(FPSTR(_name));
|
|
if (!initDone) {
|
|
// first run: reading from cfg.json
|
|
DEBUG_PRINTLN(F(" config loaded."));
|
|
} else {
|
|
// changing parameters from settings page
|
|
DEBUG_PRINTLN(F(" config (re)loaded."));
|
|
bool changed = false;
|
|
if ((oldUseUSSensorTop != useUSSensorTop) ||
|
|
(oldUseUSSensorBottom != useUSSensorBottom) ||
|
|
(oldTopAPin != topPIRorTriggerPin) ||
|
|
(oldTopBPin != topEchoPin) ||
|
|
(oldBottomAPin != bottomPIRorTriggerPin) ||
|
|
(oldBottomBPin != bottomEchoPin)) {
|
|
changed = true;
|
|
pinManager.deallocatePin(oldTopAPin, PinOwner::UM_AnimatedStaircase);
|
|
pinManager.deallocatePin(oldTopBPin, PinOwner::UM_AnimatedStaircase);
|
|
pinManager.deallocatePin(oldBottomAPin, PinOwner::UM_AnimatedStaircase);
|
|
pinManager.deallocatePin(oldBottomBPin, PinOwner::UM_AnimatedStaircase);
|
|
}
|
|
if (changed) setup();
|
|
}
|
|
// use "return !top["newestParameter"].isNull();" when updating Usermod with new features
|
|
return true;
|
|
}
|
|
|
|
/*
|
|
* Shows the delay between steps and power-off time in the "info"
|
|
* tab of the web-UI.
|
|
*/
|
|
void addToJsonInfo(JsonObject& root) {
|
|
JsonObject staircase = root["u"];
|
|
if (staircase.isNull()) {
|
|
staircase = root.createNestedObject("u");
|
|
}
|
|
|
|
JsonArray usermodEnabled = staircase.createNestedArray(F("Staircase")); // name
|
|
String btn = F("<button class=\"btn infobtn\" onclick=\"requestJson({staircase:{enabled:");
|
|
if (enabled) {
|
|
btn += F("false}});\">");
|
|
btn += F("enabled");
|
|
} else {
|
|
btn += F("true}});\">");
|
|
btn += F("disabled");
|
|
}
|
|
btn += F("</button>");
|
|
usermodEnabled.add(btn); // value
|
|
}
|
|
};
|
|
|
|
// strings to reduce flash memory usage (used more than twice)
|
|
const char Animated_Staircase::_name[] PROGMEM = "staircase";
|
|
const char Animated_Staircase::_enabled[] PROGMEM = "enabled";
|
|
const char Animated_Staircase::_segmentDelay[] PROGMEM = "segment-delay-ms";
|
|
const char Animated_Staircase::_onTime[] PROGMEM = "on-time-s";
|
|
const char Animated_Staircase::_useTopUltrasoundSensor[] PROGMEM = "useTopUltrasoundSensor";
|
|
const char Animated_Staircase::_topPIRorTrigger_pin[] PROGMEM = "topPIRorTrigger_pin";
|
|
const char Animated_Staircase::_topEcho_pin[] PROGMEM = "topEcho_pin";
|
|
const char Animated_Staircase::_useBottomUltrasoundSensor[] PROGMEM = "useBottomUltrasoundSensor";
|
|
const char Animated_Staircase::_bottomPIRorTrigger_pin[] PROGMEM = "bottomPIRorTrigger_pin";
|
|
const char Animated_Staircase::_bottomEcho_pin[] PROGMEM = "bottomEcho_pin";
|
|
const char Animated_Staircase::_topEchoCm[] PROGMEM = "top-dist-cm";
|
|
const char Animated_Staircase::_bottomEchoCm[] PROGMEM = "bottom-dist-cm";
|