fa6070c680
- additional debug timings - removed local leds[] buffer - async segment bounds change (crashes seen otherwise) - added isActive() check to Segment drawing methods - ABL simplification - palette option for Black hole (FX) - (possible) crash mitigation is Segment handling (rapid preset changes)
937 lines
29 KiB
C++
937 lines
29 KiB
C++
#define WLED_DEFINE_GLOBAL_VARS //only in one source file, wled.cpp!
|
|
#include "wled.h"
|
|
#include "wled_ethernet.h"
|
|
#include <Arduino.h>
|
|
|
|
#if defined(ARDUINO_ARCH_ESP32) && defined(WLED_DISABLE_BROWNOUT_DET)
|
|
#include "soc/soc.h"
|
|
#include "soc/rtc_cntl_reg.h"
|
|
#endif
|
|
|
|
/*
|
|
* Main WLED class implementation. Mostly initialization and connection logic
|
|
*/
|
|
|
|
WLED::WLED()
|
|
{
|
|
}
|
|
|
|
// turns all LEDs off and restarts ESP
|
|
void WLED::reset()
|
|
{
|
|
briT = 0;
|
|
#ifdef WLED_ENABLE_WEBSOCKETS
|
|
ws.closeAll(1012);
|
|
#endif
|
|
unsigned long dly = millis();
|
|
while (millis() - dly < 450) {
|
|
yield(); // enough time to send response to client
|
|
}
|
|
applyBri();
|
|
DEBUG_PRINTLN(F("WLED RESET"));
|
|
ESP.restart();
|
|
}
|
|
|
|
void WLED::loop()
|
|
{
|
|
#ifdef WLED_DEBUG
|
|
static unsigned long lastRun = 0;
|
|
unsigned long loopMillis = millis();
|
|
size_t loopDelay = loopMillis - lastRun;
|
|
if (lastRun == 0) loopDelay=0; // startup - don't have valid data from last run.
|
|
if (loopDelay > 2) DEBUG_PRINTF("Loop delayed more than %ums.\n", loopDelay);
|
|
static unsigned long maxLoopMillis = 0;
|
|
static size_t avgLoopMillis = 0;
|
|
static unsigned long maxUsermodMillis = 0;
|
|
static size_t avgUsermodMillis = 0;
|
|
static unsigned long maxStripMillis = 0;
|
|
static size_t avgStripMillis = 0;
|
|
unsigned long stripMillis;
|
|
#endif
|
|
|
|
handleTime();
|
|
#ifndef WLED_DISABLE_INFRARED
|
|
handleIR(); // 2nd call to function needed for ESP32 to return valid results -- should be good for ESP8266, too
|
|
#endif
|
|
handleConnection();
|
|
handleRemote();
|
|
handleSerial();
|
|
handleImprovWifiScan();
|
|
handleNotifications();
|
|
handleTransitions();
|
|
#ifdef WLED_ENABLE_DMX
|
|
handleDMX();
|
|
#endif
|
|
userLoop();
|
|
|
|
#ifdef WLED_DEBUG
|
|
unsigned long usermodMillis = millis();
|
|
#endif
|
|
usermods.loop();
|
|
#ifdef WLED_DEBUG
|
|
usermodMillis = millis() - usermodMillis;
|
|
avgUsermodMillis += usermodMillis;
|
|
if (usermodMillis > maxUsermodMillis) maxUsermodMillis = usermodMillis;
|
|
#endif
|
|
|
|
yield();
|
|
handleIO();
|
|
#ifndef WLED_DISABLE_INFRARED
|
|
handleIR();
|
|
#endif
|
|
#ifndef WLED_DISABLE_ALEXA
|
|
handleAlexa();
|
|
#endif
|
|
|
|
if (doCloseFile) {
|
|
closeFile();
|
|
yield();
|
|
}
|
|
|
|
#ifdef WLED_DEBUG
|
|
stripMillis = millis();
|
|
#endif
|
|
if (!realtimeMode || realtimeOverride || (realtimeMode && useMainSegmentOnly)) // block stuff if WARLS/Adalight is enabled
|
|
{
|
|
if (apActive) dnsServer.processNextRequest();
|
|
#ifndef WLED_DISABLE_OTA
|
|
if (WLED_CONNECTED && aOtaEnabled && !otaLock && correctPIN) ArduinoOTA.handle();
|
|
#endif
|
|
handleNightlight();
|
|
handlePlaylist();
|
|
yield();
|
|
|
|
#ifndef WLED_DISABLE_HUESYNC
|
|
handleHue();
|
|
yield();
|
|
#endif
|
|
|
|
handlePresets();
|
|
yield();
|
|
|
|
if (!offMode || strip.isOffRefreshRequired())
|
|
strip.service();
|
|
#ifdef ESP8266
|
|
else if (!noWifiSleep)
|
|
delay(1); //required to make sure ESP enters modem sleep (see #1184)
|
|
#endif
|
|
}
|
|
#ifdef WLED_DEBUG
|
|
stripMillis = millis() - stripMillis;
|
|
avgStripMillis += stripMillis;
|
|
if (stripMillis > maxStripMillis) maxStripMillis = stripMillis;
|
|
#endif
|
|
|
|
yield();
|
|
#ifdef ESP8266
|
|
MDNS.update();
|
|
#endif
|
|
|
|
//millis() rolls over every 50 days
|
|
if (lastMqttReconnectAttempt > millis()) {
|
|
rolloverMillis++;
|
|
lastMqttReconnectAttempt = 0;
|
|
ntpLastSyncTime = 0;
|
|
strip.restartRuntime();
|
|
}
|
|
if (millis() - lastMqttReconnectAttempt > 30000 || lastMqttReconnectAttempt == 0) { // lastMqttReconnectAttempt==0 forces immediate broadcast
|
|
lastMqttReconnectAttempt = millis();
|
|
#ifndef WLED_DISABLE_MQTT
|
|
initMqtt();
|
|
#endif
|
|
yield();
|
|
// refresh WLED nodes list
|
|
refreshNodeList();
|
|
if (nodeBroadcastEnabled) sendSysInfoUDP();
|
|
yield();
|
|
}
|
|
|
|
// 15min PIN time-out
|
|
if (strlen(settingsPIN)>0 && correctPIN && millis() - lastEditTime > PIN_TIMEOUT) {
|
|
correctPIN = false;
|
|
createEditHandler(false);
|
|
}
|
|
|
|
//LED settings have been saved, re-init busses
|
|
//This code block causes severe FPS drop on ESP32 with the original "if (busConfigs[0] != nullptr)" conditional. Investigate!
|
|
if (doInitBusses) {
|
|
doInitBusses = false;
|
|
DEBUG_PRINTLN(F("Re-init busses."));
|
|
bool aligned = strip.checkSegmentAlignment(); //see if old segments match old bus(ses)
|
|
busses.removeAll();
|
|
uint32_t mem = 0, globalBufMem = 0;
|
|
uint16_t maxlen = 0;
|
|
for (uint8_t i = 0; i < WLED_MAX_BUSSES+WLED_MIN_VIRTUAL_BUSSES; i++) {
|
|
if (busConfigs[i] == nullptr) break;
|
|
mem += BusManager::memUsage(*busConfigs[i]);
|
|
if (useGlobalLedBuffer && busConfigs[i]->start + busConfigs[i]->count > maxlen) {
|
|
maxlen = busConfigs[i]->start + busConfigs[i]->count;
|
|
globalBufMem = maxlen * 4;
|
|
}
|
|
if (mem + globalBufMem <= MAX_LED_MEMORY) {
|
|
busses.add(*busConfigs[i]);
|
|
}
|
|
delete busConfigs[i]; busConfigs[i] = nullptr;
|
|
}
|
|
strip.finalizeInit(); // also loads default ledmap if present
|
|
if (aligned) strip.makeAutoSegments();
|
|
else strip.fixInvalidSegments();
|
|
doSerializeConfig = true;
|
|
}
|
|
if (loadLedmap >= 0) {
|
|
if (!strip.deserializeMap(loadLedmap) && strip.isMatrix && loadLedmap == 0) strip.setUpMatrix();
|
|
loadLedmap = -1;
|
|
}
|
|
yield();
|
|
if (doSerializeConfig) serializeConfig();
|
|
|
|
yield();
|
|
handleWs();
|
|
handleStatusLED();
|
|
|
|
toki.resetTick();
|
|
|
|
#if WLED_WATCHDOG_TIMEOUT > 0
|
|
// we finished our mainloop, reset the watchdog timer
|
|
if (!strip.isUpdating())
|
|
#ifdef ARDUINO_ARCH_ESP32
|
|
esp_task_wdt_reset();
|
|
#else
|
|
ESP.wdtFeed();
|
|
#endif
|
|
#endif
|
|
|
|
if (doReboot && (!doInitBusses || !doSerializeConfig)) // if busses have to be inited & saved, wait until next iteration
|
|
reset();
|
|
|
|
// DEBUG serial logging (every 30s)
|
|
#ifdef WLED_DEBUG
|
|
loopMillis = millis() - loopMillis;
|
|
if (loopMillis > 30) {
|
|
DEBUG_PRINTF("Loop took %lums.\n", loopMillis);
|
|
DEBUG_PRINTF("Usermods took %lums.\n", usermodMillis);
|
|
DEBUG_PRINTF("Strip took %lums.\n", stripMillis);
|
|
}
|
|
avgLoopMillis += loopMillis;
|
|
if (loopMillis > maxLoopMillis) maxLoopMillis = loopMillis;
|
|
if (millis() - debugTime > 29999) {
|
|
DEBUG_PRINTLN(F("---DEBUG INFO---"));
|
|
DEBUG_PRINT(F("Runtime: ")); DEBUG_PRINTLN(millis());
|
|
DEBUG_PRINT(F("Unix time: ")); toki.printTime(toki.getTime());
|
|
DEBUG_PRINT(F("Free heap: ")); DEBUG_PRINTLN(ESP.getFreeHeap());
|
|
#if defined(ARDUINO_ARCH_ESP32) && defined(BOARD_HAS_PSRAM)
|
|
if (psramFound()) {
|
|
DEBUG_PRINT(F("Total PSRAM: ")); DEBUG_PRINT(ESP.getPsramSize()/1024); DEBUG_PRINTLN("kB");
|
|
DEBUG_PRINT(F("Free PSRAM: ")); DEBUG_PRINT(ESP.getFreePsram()/1024); DEBUG_PRINTLN("kB");
|
|
}
|
|
#endif
|
|
DEBUG_PRINT(F("Wifi state: ")); DEBUG_PRINTLN(WiFi.status());
|
|
|
|
if (WiFi.status() != lastWifiState) {
|
|
wifiStateChangedTime = millis();
|
|
}
|
|
lastWifiState = WiFi.status();
|
|
DEBUG_PRINT(F("State time: ")); DEBUG_PRINTLN(wifiStateChangedTime);
|
|
DEBUG_PRINT(F("NTP last sync: ")); DEBUG_PRINTLN(ntpLastSyncTime);
|
|
DEBUG_PRINT(F("Client IP: ")); DEBUG_PRINTLN(Network.localIP());
|
|
if (loops > 0) { // avoid division by zero
|
|
DEBUG_PRINT(F("Loops/sec: ")); DEBUG_PRINTLN(loops / 30);
|
|
DEBUG_PRINT(F("Loop time[ms]: ")); DEBUG_PRINT(avgLoopMillis/loops); DEBUG_PRINT("/");DEBUG_PRINTLN(maxLoopMillis);
|
|
DEBUG_PRINT(F("UM time[ms]: ")); DEBUG_PRINT(avgUsermodMillis/loops); DEBUG_PRINT("/");DEBUG_PRINTLN(maxUsermodMillis);
|
|
DEBUG_PRINT(F("Strip time[ms]: ")); DEBUG_PRINT(avgStripMillis/loops); DEBUG_PRINT("/"); DEBUG_PRINTLN(maxStripMillis);
|
|
}
|
|
strip.printSize();
|
|
loops = 0;
|
|
maxLoopMillis = 0;
|
|
maxUsermodMillis = 0;
|
|
maxStripMillis = 0;
|
|
avgUsermodMillis = 0;
|
|
avgStripMillis = 0;
|
|
debugTime = millis();
|
|
}
|
|
loops++;
|
|
lastRun = millis();
|
|
#endif // WLED_DEBUG
|
|
}
|
|
|
|
void WLED::enableWatchdog() {
|
|
#if WLED_WATCHDOG_TIMEOUT > 0
|
|
#ifdef ARDUINO_ARCH_ESP32
|
|
esp_err_t watchdog = esp_task_wdt_init(WLED_WATCHDOG_TIMEOUT, true);
|
|
DEBUG_PRINT(F("Watchdog enabled: "));
|
|
if (watchdog == ESP_OK) {
|
|
DEBUG_PRINTLN(F("OK"));
|
|
} else {
|
|
DEBUG_PRINTLN(watchdog);
|
|
return;
|
|
}
|
|
esp_task_wdt_add(NULL);
|
|
#else
|
|
ESP.wdtEnable(WLED_WATCHDOG_TIMEOUT * 1000);
|
|
#endif
|
|
#endif
|
|
}
|
|
|
|
void WLED::disableWatchdog() {
|
|
#if WLED_WATCHDOG_TIMEOUT > 0
|
|
DEBUG_PRINTLN(F("Watchdog: disabled"));
|
|
#ifdef ARDUINO_ARCH_ESP32
|
|
esp_task_wdt_delete(NULL);
|
|
#else
|
|
ESP.wdtDisable();
|
|
#endif
|
|
#endif
|
|
}
|
|
|
|
void WLED::setup()
|
|
{
|
|
#if defined(ARDUINO_ARCH_ESP32) && defined(WLED_DISABLE_BROWNOUT_DET)
|
|
WRITE_PERI_REG(RTC_CNTL_BROWN_OUT_REG, 0); //disable brownout detection
|
|
#endif
|
|
|
|
#ifdef ARDUINO_ARCH_ESP32
|
|
pinMode(hardwareRX, INPUT_PULLDOWN); delay(1); // suppress noise in case RX pin is floating (at low noise energy) - see issue #3128
|
|
#endif
|
|
Serial.begin(115200);
|
|
#if !ARDUINO_USB_CDC_ON_BOOT
|
|
Serial.setTimeout(50); // this causes troubles on new MCUs that have a "virtual" USB Serial (HWCDC)
|
|
#else
|
|
#endif
|
|
#if defined(WLED_DEBUG) && defined(ARDUINO_ARCH_ESP32) && (defined(CONFIG_IDF_TARGET_ESP32S2) || defined(CONFIG_IDF_TARGET_ESP32C3) || ARDUINO_USB_CDC_ON_BOOT)
|
|
delay(2500); // allow CDC USB serial to initialise
|
|
#endif
|
|
#if !defined(WLED_DEBUG) && defined(ARDUINO_ARCH_ESP32) && !defined(WLED_DEBUG_HOST) && ARDUINO_USB_CDC_ON_BOOT
|
|
Serial.setDebugOutput(false); // switch off kernel messages when using USBCDC
|
|
#endif
|
|
DEBUG_PRINTLN();
|
|
DEBUG_PRINT(F("---WLED "));
|
|
DEBUG_PRINT(versionString);
|
|
DEBUG_PRINT(" ");
|
|
DEBUG_PRINT(VERSION);
|
|
DEBUG_PRINTLN(F(" INIT---"));
|
|
#ifdef ARDUINO_ARCH_ESP32
|
|
DEBUG_PRINT(F("esp32 "));
|
|
DEBUG_PRINTLN(ESP.getSdkVersion());
|
|
#if defined(ESP_ARDUINO_VERSION)
|
|
//DEBUG_PRINTF(F("arduino-esp32 0x%06x\n"), ESP_ARDUINO_VERSION);
|
|
DEBUG_PRINTF("arduino-esp32 v%d.%d.%d\n", int(ESP_ARDUINO_VERSION_MAJOR), int(ESP_ARDUINO_VERSION_MINOR), int(ESP_ARDUINO_VERSION_PATCH)); // availeable since v2.0.0
|
|
#else
|
|
DEBUG_PRINTLN(F("arduino-esp32 v1.0.x\n")); // we can't say in more detail.
|
|
#endif
|
|
|
|
DEBUG_PRINT(F("CPU: ")); DEBUG_PRINT(ESP.getChipModel());
|
|
DEBUG_PRINT(F(" rev.")); DEBUG_PRINT(ESP.getChipRevision());
|
|
DEBUG_PRINT(F(", ")); DEBUG_PRINT(ESP.getChipCores()); DEBUG_PRINT(F(" core(s)"));
|
|
DEBUG_PRINT(F(", ")); DEBUG_PRINT(ESP.getCpuFreqMHz()); DEBUG_PRINTLN(F("MHz."));
|
|
DEBUG_PRINT(F("FLASH: ")); DEBUG_PRINT((ESP.getFlashChipSize()/1024)/1024);
|
|
DEBUG_PRINT(F("MB, Mode ")); DEBUG_PRINT(ESP.getFlashChipMode());
|
|
#ifdef WLED_DEBUG
|
|
switch (ESP.getFlashChipMode()) {
|
|
// missing: Octal modes
|
|
case FM_QIO: DEBUG_PRINT(F(" (QIO)")); break;
|
|
case FM_QOUT: DEBUG_PRINT(F(" (QOUT)"));break;
|
|
case FM_DIO: DEBUG_PRINT(F(" (DIO)")); break;
|
|
case FM_DOUT: DEBUG_PRINT(F(" (DOUT)"));break;
|
|
default: break;
|
|
}
|
|
#endif
|
|
DEBUG_PRINT(F(", speed ")); DEBUG_PRINT(ESP.getFlashChipSpeed()/1000000);DEBUG_PRINTLN(F("MHz."));
|
|
|
|
#else
|
|
DEBUG_PRINT(F("esp8266 "));
|
|
DEBUG_PRINTLN(ESP.getCoreVersion());
|
|
#endif
|
|
DEBUG_PRINT(F("heap ")); DEBUG_PRINTLN(ESP.getFreeHeap());
|
|
|
|
#if defined(ARDUINO_ARCH_ESP32) && defined(BOARD_HAS_PSRAM)
|
|
#if defined(CONFIG_IDF_TARGET_ESP32S3)
|
|
// S3: reserve GPIO 33-37 for "octal" PSRAM
|
|
managed_pin_type pins[] = { {33, true}, {34, true}, {35, true}, {36, true}, {37, true} };
|
|
pinManager.allocateMultiplePins(pins, sizeof(pins)/sizeof(managed_pin_type), PinOwner::SPI_RAM);
|
|
#elif defined(CONFIG_IDF_TARGET_ESP32S2)
|
|
// S2: reserve GPIO 26-32 for PSRAM (may fail due to isPinOk() but that will also prevent other allocation)
|
|
managed_pin_type pins[] = { {26, true}, {27, true}, {28, true}, {29, true}, {30, true}, {31, true}, {32, true} };
|
|
pinManager.allocateMultiplePins(pins, sizeof(pins)/sizeof(managed_pin_type), PinOwner::SPI_RAM);
|
|
#elif defined(CONFIG_IDF_TARGET_ESP32C3)
|
|
// C3: reserve GPIO 12-17 for PSRAM (may fail due to isPinOk() but that will also prevent other allocation)
|
|
managed_pin_type pins[] = { {12, true}, {13, true}, {14, true}, {15, true}, {16, true}, {17, true} };
|
|
pinManager.allocateMultiplePins(pins, sizeof(pins)/sizeof(managed_pin_type), PinOwner::SPI_RAM);
|
|
#else
|
|
// GPIO16/GPIO17 reserved for SPI RAM
|
|
managed_pin_type pins[] = { {16, true}, {17, true} };
|
|
pinManager.allocateMultiplePins(pins, sizeof(pins)/sizeof(managed_pin_type), PinOwner::SPI_RAM);
|
|
#endif
|
|
#if defined(WLED_USE_PSRAM)
|
|
if (psramFound()) {
|
|
DEBUG_PRINT(F("Total PSRAM: ")); DEBUG_PRINT(ESP.getPsramSize()/1024); DEBUG_PRINTLN("kB");
|
|
DEBUG_PRINT(F("Free PSRAM : ")); DEBUG_PRINT(ESP.getFreePsram()/1024); DEBUG_PRINTLN("kB");
|
|
}
|
|
#else
|
|
DEBUG_PRINTLN(F("PSRAM not used."));
|
|
#endif
|
|
#endif
|
|
|
|
//DEBUG_PRINT(F("LEDs inited. heap usage ~"));
|
|
//DEBUG_PRINTLN(heapPreAlloc - ESP.getFreeHeap());
|
|
|
|
#ifdef WLED_DEBUG
|
|
pinManager.allocatePin(hardwareTX, true, PinOwner::DebugOut); // TX (GPIO1 on ESP32) reserved for debug output
|
|
#endif
|
|
#ifdef WLED_ENABLE_DMX //reserve GPIO2 as hardcoded DMX pin
|
|
pinManager.allocatePin(2, true, PinOwner::DMX);
|
|
#endif
|
|
|
|
DEBUG_PRINTLN(F("Registering usermods ..."));
|
|
registerUsermods();
|
|
|
|
DEBUG_PRINT(F("heap ")); DEBUG_PRINTLN(ESP.getFreeHeap());
|
|
|
|
for (uint8_t i=1; i<WLED_MAX_BUTTONS; i++) btnPin[i] = -1;
|
|
|
|
bool fsinit = false;
|
|
DEBUGFS_PRINTLN(F("Mount FS"));
|
|
#ifdef ARDUINO_ARCH_ESP32
|
|
fsinit = WLED_FS.begin(true);
|
|
#else
|
|
fsinit = WLED_FS.begin();
|
|
#endif
|
|
if (!fsinit) {
|
|
DEBUGFS_PRINTLN(F("FS failed!"));
|
|
errorFlag = ERR_FS_BEGIN;
|
|
}
|
|
#ifdef WLED_ADD_EEPROM_SUPPORT
|
|
else deEEP();
|
|
#else
|
|
initPresetsFile();
|
|
#endif
|
|
updateFSInfo();
|
|
|
|
// generate module IDs must be done before AP setup
|
|
escapedMac = WiFi.macAddress();
|
|
escapedMac.replace(":", "");
|
|
escapedMac.toLowerCase();
|
|
|
|
WLED_SET_AP_SSID(); // otherwise it is empty on first boot until config is saved
|
|
|
|
DEBUG_PRINTLN(F("Reading config"));
|
|
deserializeConfigFromFS();
|
|
|
|
#if defined(STATUSLED) && STATUSLED>=0
|
|
if (!pinManager.isPinAllocated(STATUSLED)) {
|
|
// NOTE: Special case: The status LED should *NOT* be allocated.
|
|
// See comments in handleStatusLed().
|
|
pinMode(STATUSLED, OUTPUT);
|
|
}
|
|
#endif
|
|
|
|
DEBUG_PRINTLN(F("Initializing strip"));
|
|
beginStrip();
|
|
DEBUG_PRINT(F("heap ")); DEBUG_PRINTLN(ESP.getFreeHeap());
|
|
|
|
DEBUG_PRINTLN(F("Usermods setup"));
|
|
userSetup();
|
|
usermods.setup();
|
|
DEBUG_PRINT(F("heap ")); DEBUG_PRINTLN(ESP.getFreeHeap());
|
|
|
|
if (strcmp(clientSSID, DEFAULT_CLIENT_SSID) == 0)
|
|
showWelcomePage = true;
|
|
WiFi.persistent(false);
|
|
#ifdef WLED_USE_ETHERNET
|
|
WiFi.onEvent(WiFiEvent);
|
|
#endif
|
|
|
|
#ifdef WLED_ENABLE_ADALIGHT
|
|
//Serial RX (Adalight, Improv, Serial JSON) only possible if GPIO3 unused
|
|
//Serial TX (Debug, Improv, Serial JSON) only possible if GPIO1 unused
|
|
if (!pinManager.isPinAllocated(hardwareRX) && !pinManager.isPinAllocated(hardwareTX)) {
|
|
Serial.println(F("Ada"));
|
|
}
|
|
#endif
|
|
|
|
// fill in unique mdns default
|
|
if (strcmp(cmDNS, "x") == 0) sprintf_P(cmDNS, PSTR("wled-%*s"), 6, escapedMac.c_str() + 6);
|
|
#ifndef WLED_DISABLE_MQTT
|
|
if (mqttDeviceTopic[0] == 0) sprintf_P(mqttDeviceTopic, PSTR("wled/%*s"), 6, escapedMac.c_str() + 6);
|
|
if (mqttClientID[0] == 0) sprintf_P(mqttClientID, PSTR("WLED-%*s"), 6, escapedMac.c_str() + 6);
|
|
#endif
|
|
|
|
#ifdef WLED_ENABLE_ADALIGHT
|
|
if (Serial.available() > 0 && Serial.peek() == 'I') handleImprovPacket();
|
|
#endif
|
|
|
|
#ifndef WLED_DISABLE_OTA
|
|
if (aOtaEnabled) {
|
|
ArduinoOTA.onStart([]() {
|
|
#ifdef ESP8266
|
|
wifi_set_sleep_type(NONE_SLEEP_T);
|
|
#endif
|
|
WLED::instance().disableWatchdog();
|
|
DEBUG_PRINTLN(F("Start ArduinoOTA"));
|
|
});
|
|
ArduinoOTA.onError([](ota_error_t error) {
|
|
// reenable watchdog on failed update
|
|
WLED::instance().enableWatchdog();
|
|
});
|
|
if (strlen(cmDNS) > 0)
|
|
ArduinoOTA.setHostname(cmDNS);
|
|
}
|
|
#endif
|
|
#ifdef WLED_ENABLE_DMX
|
|
initDMX();
|
|
#endif
|
|
|
|
#ifdef WLED_ENABLE_ADALIGHT
|
|
if (Serial.available() > 0 && Serial.peek() == 'I') handleImprovPacket();
|
|
#endif
|
|
|
|
// HTTP server page init
|
|
DEBUG_PRINTLN(F("initServer"));
|
|
initServer();
|
|
DEBUG_PRINT(F("heap ")); DEBUG_PRINTLN(ESP.getFreeHeap());
|
|
|
|
enableWatchdog();
|
|
|
|
#if defined(ARDUINO_ARCH_ESP32) && defined(WLED_DISABLE_BROWNOUT_DET)
|
|
WRITE_PERI_REG(RTC_CNTL_BROWN_OUT_REG, 1); //enable brownout detector
|
|
#endif
|
|
}
|
|
|
|
void WLED::beginStrip()
|
|
{
|
|
// Initialize NeoPixel Strip and button
|
|
strip.finalizeInit(); // busses created during deserializeConfig()
|
|
strip.makeAutoSegments();
|
|
strip.setBrightness(0);
|
|
strip.setShowCallback(handleOverlayDraw);
|
|
|
|
if (turnOnAtBoot) {
|
|
if (briS > 0) bri = briS;
|
|
else if (bri == 0) bri = 128;
|
|
} else {
|
|
// fix for #3196
|
|
briLast = briS; bri = 0;
|
|
strip.fill(BLACK);
|
|
strip.show();
|
|
}
|
|
if (bootPreset > 0) {
|
|
applyPreset(bootPreset, CALL_MODE_INIT);
|
|
}
|
|
colorUpdated(CALL_MODE_INIT);
|
|
|
|
// init relay pin
|
|
if (rlyPin>=0)
|
|
digitalWrite(rlyPin, (rlyMde ? bri : !bri));
|
|
}
|
|
|
|
void WLED::initAP(bool resetAP)
|
|
{
|
|
if (apBehavior == AP_BEHAVIOR_BUTTON_ONLY && !resetAP)
|
|
return;
|
|
|
|
if (resetAP) {
|
|
WLED_SET_AP_SSID();
|
|
strcpy_P(apPass, PSTR(WLED_AP_PASS));
|
|
}
|
|
DEBUG_PRINT(F("Opening access point "));
|
|
DEBUG_PRINTLN(apSSID);
|
|
WiFi.softAPConfig(IPAddress(4, 3, 2, 1), IPAddress(4, 3, 2, 1), IPAddress(255, 255, 255, 0));
|
|
WiFi.softAP(apSSID, apPass, apChannel, apHide);
|
|
#if defined(LOLIN_WIFI_FIX) && (defined(ARDUINO_ARCH_ESP32C3) || defined(ARDUINO_ARCH_ESP32S2))
|
|
WiFi.setTxPower(WIFI_POWER_8_5dBm);
|
|
#endif
|
|
|
|
if (!apActive) // start captive portal if AP active
|
|
{
|
|
DEBUG_PRINTLN(F("Init AP interfaces"));
|
|
server.begin();
|
|
if (udpPort > 0 && udpPort != ntpLocalPort) {
|
|
udpConnected = notifierUdp.begin(udpPort);
|
|
}
|
|
if (udpRgbPort > 0 && udpRgbPort != ntpLocalPort && udpRgbPort != udpPort) {
|
|
udpRgbConnected = rgbUdp.begin(udpRgbPort);
|
|
}
|
|
if (udpPort2 > 0 && udpPort2 != ntpLocalPort && udpPort2 != udpPort && udpPort2 != udpRgbPort) {
|
|
udp2Connected = notifier2Udp.begin(udpPort2);
|
|
}
|
|
e131.begin(false, e131Port, e131Universe, E131_MAX_UNIVERSE_COUNT);
|
|
ddp.begin(false, DDP_DEFAULT_PORT);
|
|
|
|
dnsServer.setErrorReplyCode(DNSReplyCode::NoError);
|
|
dnsServer.start(53, "*", WiFi.softAPIP());
|
|
}
|
|
apActive = true;
|
|
}
|
|
|
|
bool WLED::initEthernet()
|
|
{
|
|
#if defined(ARDUINO_ARCH_ESP32) && defined(WLED_USE_ETHERNET)
|
|
|
|
static bool successfullyConfiguredEthernet = false;
|
|
|
|
if (successfullyConfiguredEthernet) {
|
|
// DEBUG_PRINTLN(F("initE: ETH already successfully configured, ignoring"));
|
|
return false;
|
|
}
|
|
if (ethernetType == WLED_ETH_NONE) {
|
|
return false;
|
|
}
|
|
if (ethernetType >= WLED_NUM_ETH_TYPES) {
|
|
DEBUG_PRINT(F("initE: Ignoring attempt for invalid ethernetType ")); DEBUG_PRINTLN(ethernetType);
|
|
return false;
|
|
}
|
|
|
|
DEBUG_PRINT(F("initE: Attempting ETH config: ")); DEBUG_PRINTLN(ethernetType);
|
|
|
|
// Ethernet initialization should only succeed once -- else reboot required
|
|
ethernet_settings es = ethernetBoards[ethernetType];
|
|
managed_pin_type pinsToAllocate[10] = {
|
|
// first six pins are non-configurable
|
|
esp32_nonconfigurable_ethernet_pins[0],
|
|
esp32_nonconfigurable_ethernet_pins[1],
|
|
esp32_nonconfigurable_ethernet_pins[2],
|
|
esp32_nonconfigurable_ethernet_pins[3],
|
|
esp32_nonconfigurable_ethernet_pins[4],
|
|
esp32_nonconfigurable_ethernet_pins[5],
|
|
{ (int8_t)es.eth_mdc, true }, // [6] = MDC is output and mandatory
|
|
{ (int8_t)es.eth_mdio, true }, // [7] = MDIO is bidirectional and mandatory
|
|
{ (int8_t)es.eth_power, true }, // [8] = optional pin, not all boards use
|
|
{ ((int8_t)0xFE), false }, // [9] = replaced with eth_clk_mode, mandatory
|
|
};
|
|
// update the clock pin....
|
|
if (es.eth_clk_mode == ETH_CLOCK_GPIO0_IN) {
|
|
pinsToAllocate[9].pin = 0;
|
|
pinsToAllocate[9].isOutput = false;
|
|
} else if (es.eth_clk_mode == ETH_CLOCK_GPIO0_OUT) {
|
|
pinsToAllocate[9].pin = 0;
|
|
pinsToAllocate[9].isOutput = true;
|
|
} else if (es.eth_clk_mode == ETH_CLOCK_GPIO16_OUT) {
|
|
pinsToAllocate[9].pin = 16;
|
|
pinsToAllocate[9].isOutput = true;
|
|
} else if (es.eth_clk_mode == ETH_CLOCK_GPIO17_OUT) {
|
|
pinsToAllocate[9].pin = 17;
|
|
pinsToAllocate[9].isOutput = true;
|
|
} else {
|
|
DEBUG_PRINT(F("initE: Failing due to invalid eth_clk_mode ("));
|
|
DEBUG_PRINT(es.eth_clk_mode);
|
|
DEBUG_PRINTLN(")");
|
|
return false;
|
|
}
|
|
|
|
if (!pinManager.allocateMultiplePins(pinsToAllocate, 10, PinOwner::Ethernet)) {
|
|
DEBUG_PRINTLN(F("initE: Failed to allocate ethernet pins"));
|
|
return false;
|
|
}
|
|
|
|
/*
|
|
For LAN8720 the most correct way is to perform clean reset each time before init
|
|
applying LOW to power or nRST pin for at least 100 us (please refer to datasheet, page 59)
|
|
ESP_IDF > V4 implements it (150 us, lan87xx_reset_hw(esp_eth_phy_t *phy) function in
|
|
/components/esp_eth/src/esp_eth_phy_lan87xx.c, line 280)
|
|
but ESP_IDF < V4 does not. Lets do it:
|
|
[not always needed, might be relevant in some EMI situations at startup and for hot resets]
|
|
*/
|
|
#if ESP_IDF_VERSION_MAJOR==3
|
|
if(es.eth_power>0 && es.eth_type==ETH_PHY_LAN8720) {
|
|
pinMode(es.eth_power, OUTPUT);
|
|
digitalWrite(es.eth_power, 0);
|
|
delayMicroseconds(150);
|
|
digitalWrite(es.eth_power, 1);
|
|
delayMicroseconds(10);
|
|
}
|
|
#endif
|
|
|
|
if (!ETH.begin(
|
|
(uint8_t) es.eth_address,
|
|
(int) es.eth_power,
|
|
(int) es.eth_mdc,
|
|
(int) es.eth_mdio,
|
|
(eth_phy_type_t) es.eth_type,
|
|
(eth_clock_mode_t) es.eth_clk_mode
|
|
)) {
|
|
DEBUG_PRINTLN(F("initC: ETH.begin() failed"));
|
|
// de-allocate the allocated pins
|
|
for (managed_pin_type mpt : pinsToAllocate) {
|
|
pinManager.deallocatePin(mpt.pin, PinOwner::Ethernet);
|
|
}
|
|
return false;
|
|
}
|
|
|
|
successfullyConfiguredEthernet = true;
|
|
DEBUG_PRINTLN(F("initC: *** Ethernet successfully configured! ***"));
|
|
return true;
|
|
#else
|
|
return false; // Ethernet not enabled for build
|
|
#endif
|
|
|
|
}
|
|
|
|
void WLED::initConnection()
|
|
{
|
|
#ifdef WLED_ENABLE_WEBSOCKETS
|
|
ws.onEvent(wsEvent);
|
|
#endif
|
|
|
|
WiFi.disconnect(true); // close old connections
|
|
#ifdef ESP8266
|
|
WiFi.setPhyMode(WIFI_PHY_MODE_11N);
|
|
#endif
|
|
|
|
if (staticIP[0] != 0 && staticGateway[0] != 0) {
|
|
WiFi.config(staticIP, staticGateway, staticSubnet, IPAddress(1, 1, 1, 1));
|
|
} else {
|
|
WiFi.config(IPAddress((uint32_t)0), IPAddress((uint32_t)0), IPAddress((uint32_t)0));
|
|
}
|
|
|
|
lastReconnectAttempt = millis();
|
|
|
|
if (!WLED_WIFI_CONFIGURED) {
|
|
DEBUG_PRINTLN(F("No connection configured."));
|
|
if (!apActive) initAP(); // instantly go to ap mode
|
|
return;
|
|
} else if (!apActive) {
|
|
if (apBehavior == AP_BEHAVIOR_ALWAYS) {
|
|
DEBUG_PRINTLN(F("Access point ALWAYS enabled."));
|
|
initAP();
|
|
} else {
|
|
DEBUG_PRINTLN(F("Access point disabled (init)."));
|
|
WiFi.softAPdisconnect(true);
|
|
WiFi.mode(WIFI_STA);
|
|
}
|
|
}
|
|
showWelcomePage = false;
|
|
|
|
DEBUG_PRINT(F("Connecting to "));
|
|
DEBUG_PRINT(clientSSID);
|
|
DEBUG_PRINTLN("...");
|
|
|
|
// convert the "serverDescription" into a valid DNS hostname (alphanumeric)
|
|
char hostname[25];
|
|
prepareHostname(hostname);
|
|
|
|
#ifdef ESP8266
|
|
WiFi.hostname(hostname);
|
|
#endif
|
|
|
|
WiFi.begin(clientSSID, clientPass);
|
|
#ifdef ARDUINO_ARCH_ESP32
|
|
#if defined(LOLIN_WIFI_FIX) && (defined(ARDUINO_ARCH_ESP32C3) || defined(ARDUINO_ARCH_ESP32S2))
|
|
WiFi.setTxPower(WIFI_POWER_8_5dBm);
|
|
#endif
|
|
WiFi.setSleep(!noWifiSleep);
|
|
WiFi.setHostname(hostname);
|
|
#else
|
|
wifi_set_sleep_type((noWifiSleep) ? NONE_SLEEP_T : MODEM_SLEEP_T);
|
|
#endif
|
|
}
|
|
|
|
void WLED::initInterfaces()
|
|
{
|
|
DEBUG_PRINTLN(F("Init STA interfaces"));
|
|
|
|
#ifndef WLED_DISABLE_HUESYNC
|
|
IPAddress ipAddress = Network.localIP();
|
|
if (hueIP[0] == 0) {
|
|
hueIP[0] = ipAddress[0];
|
|
hueIP[1] = ipAddress[1];
|
|
hueIP[2] = ipAddress[2];
|
|
}
|
|
#endif
|
|
|
|
#ifndef WLED_DISABLE_ALEXA
|
|
// init Alexa hue emulation
|
|
if (alexaEnabled)
|
|
alexaInit();
|
|
#endif
|
|
|
|
#ifndef WLED_DISABLE_OTA
|
|
if (aOtaEnabled)
|
|
ArduinoOTA.begin();
|
|
#endif
|
|
|
|
// Set up mDNS responder:
|
|
if (strlen(cmDNS) > 0) {
|
|
// "end" must be called before "begin" is called a 2nd time
|
|
// see https://github.com/esp8266/Arduino/issues/7213
|
|
MDNS.end();
|
|
MDNS.begin(cmDNS);
|
|
|
|
DEBUG_PRINTLN(F("mDNS started"));
|
|
MDNS.addService("http", "tcp", 80);
|
|
MDNS.addService("wled", "tcp", 80);
|
|
MDNS.addServiceTxt("wled", "tcp", "mac", escapedMac.c_str());
|
|
}
|
|
server.begin();
|
|
|
|
if (udpPort > 0 && udpPort != ntpLocalPort) {
|
|
udpConnected = notifierUdp.begin(udpPort);
|
|
if (udpConnected && udpRgbPort != udpPort)
|
|
udpRgbConnected = rgbUdp.begin(udpRgbPort);
|
|
if (udpConnected && udpPort2 != udpPort && udpPort2 != udpRgbPort)
|
|
udp2Connected = notifier2Udp.begin(udpPort2);
|
|
}
|
|
if (ntpEnabled)
|
|
ntpConnected = ntpUdp.begin(ntpLocalPort);
|
|
|
|
e131.begin(e131Multicast, e131Port, e131Universe, E131_MAX_UNIVERSE_COUNT);
|
|
ddp.begin(false, DDP_DEFAULT_PORT);
|
|
reconnectHue();
|
|
#ifndef WLED_DISABLE_MQTT
|
|
initMqtt();
|
|
#endif
|
|
interfacesInited = true;
|
|
wasConnected = true;
|
|
}
|
|
|
|
void WLED::handleConnection()
|
|
{
|
|
static byte stacO = 0;
|
|
static uint32_t lastHeap = UINT32_MAX;
|
|
static unsigned long heapTime = 0;
|
|
unsigned long now = millis();
|
|
|
|
if (now < 2000 && (!WLED_WIFI_CONFIGURED || apBehavior == AP_BEHAVIOR_ALWAYS))
|
|
return;
|
|
|
|
if (lastReconnectAttempt == 0) {
|
|
DEBUG_PRINTLN(F("lastReconnectAttempt == 0"));
|
|
initConnection();
|
|
return;
|
|
}
|
|
|
|
// reconnect WiFi to clear stale allocations if heap gets too low
|
|
if (now - heapTime > 5000) {
|
|
uint32_t heap = ESP.getFreeHeap();
|
|
if (heap < MIN_HEAP_SIZE && lastHeap < MIN_HEAP_SIZE) {
|
|
DEBUG_PRINT(F("Heap too low! "));
|
|
DEBUG_PRINTLN(heap);
|
|
forceReconnect = true;
|
|
strip.purgeSegments(true); // remove all but one segments from memory
|
|
} else if (heap < MIN_HEAP_SIZE) {
|
|
strip.purgeSegments();
|
|
}
|
|
lastHeap = heap;
|
|
heapTime = now;
|
|
}
|
|
|
|
byte stac = 0;
|
|
if (apActive) {
|
|
#ifdef ESP8266
|
|
stac = wifi_softap_get_station_num();
|
|
#else
|
|
wifi_sta_list_t stationList;
|
|
esp_wifi_ap_get_sta_list(&stationList);
|
|
stac = stationList.num;
|
|
#endif
|
|
if (stac != stacO) {
|
|
stacO = stac;
|
|
DEBUG_PRINT(F("Connected AP clients: "));
|
|
DEBUG_PRINTLN(stac);
|
|
if (!WLED_CONNECTED && WLED_WIFI_CONFIGURED) { // trying to connect, but not connected
|
|
if (stac)
|
|
WiFi.disconnect(); // disable search so that AP can work
|
|
else
|
|
initConnection(); // restart search
|
|
}
|
|
}
|
|
}
|
|
if (forceReconnect) {
|
|
DEBUG_PRINTLN(F("Forcing reconnect."));
|
|
initConnection();
|
|
interfacesInited = false;
|
|
forceReconnect = false;
|
|
wasConnected = false;
|
|
return;
|
|
}
|
|
if (!Network.isConnected()) {
|
|
if (interfacesInited) {
|
|
DEBUG_PRINTLN(F("Disconnected!"));
|
|
interfacesInited = false;
|
|
initConnection();
|
|
}
|
|
//send improv failed 6 seconds after second init attempt (24 sec. after provisioning)
|
|
if (improvActive > 2 && now - lastReconnectAttempt > 6000) {
|
|
sendImprovStateResponse(0x03, true);
|
|
improvActive = 2;
|
|
}
|
|
if (now - lastReconnectAttempt > ((stac) ? 300000 : 18000) && WLED_WIFI_CONFIGURED) {
|
|
if (improvActive == 2) improvActive = 3;
|
|
DEBUG_PRINTLN(F("Last reconnect too old."));
|
|
initConnection();
|
|
}
|
|
if (!apActive && now - lastReconnectAttempt > 12000 && (!wasConnected || apBehavior == AP_BEHAVIOR_NO_CONN)) {
|
|
DEBUG_PRINTLN(F("Not connected AP."));
|
|
initAP();
|
|
}
|
|
} else if (!interfacesInited) { //newly connected
|
|
DEBUG_PRINTLN("");
|
|
DEBUG_PRINT(F("Connected! IP address: "));
|
|
DEBUG_PRINTLN(Network.localIP());
|
|
if (improvActive) {
|
|
if (improvError == 3) sendImprovStateResponse(0x00, true);
|
|
sendImprovStateResponse(0x04);
|
|
if (improvActive > 1) sendImprovIPRPCResult(ImprovRPCType::Command_Wifi);
|
|
}
|
|
initInterfaces();
|
|
userConnected();
|
|
usermods.connected();
|
|
lastMqttReconnectAttempt = 0; // force immediate update
|
|
|
|
// shut down AP
|
|
if (apBehavior != AP_BEHAVIOR_ALWAYS && apActive) {
|
|
dnsServer.stop();
|
|
WiFi.softAPdisconnect(true);
|
|
apActive = false;
|
|
DEBUG_PRINTLN(F("Access point disabled (handle)."));
|
|
}
|
|
}
|
|
}
|
|
|
|
// If status LED pin is allocated for other uses, does nothing
|
|
// else blink at 1Hz when WLED_CONNECTED is false (no WiFi, ?? no Ethernet ??)
|
|
// else blink at 2Hz when MQTT is enabled but not connected
|
|
// else turn the status LED off
|
|
void WLED::handleStatusLED()
|
|
{
|
|
#if defined(STATUSLED)
|
|
uint32_t c = 0;
|
|
|
|
#if STATUSLED>=0
|
|
if (pinManager.isPinAllocated(STATUSLED)) {
|
|
return; //lower priority if something else uses the same pin
|
|
}
|
|
#endif
|
|
|
|
if (WLED_CONNECTED) {
|
|
c = RGBW32(0,255,0,0);
|
|
ledStatusType = 2;
|
|
} else if (WLED_MQTT_CONNECTED) {
|
|
c = RGBW32(0,128,0,0);
|
|
ledStatusType = 4;
|
|
} else if (apActive) {
|
|
c = RGBW32(0,0,255,0);
|
|
ledStatusType = 1;
|
|
}
|
|
if (ledStatusType) {
|
|
if (millis() - ledStatusLastMillis >= (1000/ledStatusType)) {
|
|
ledStatusLastMillis = millis();
|
|
ledStatusState = !ledStatusState;
|
|
#if STATUSLED>=0
|
|
digitalWrite(STATUSLED, ledStatusState);
|
|
#else
|
|
busses.setStatusPixel(ledStatusState ? c : 0);
|
|
#endif
|
|
}
|
|
} else {
|
|
#if STATUSLED>=0
|
|
#ifdef STATUSLEDINVERTED
|
|
digitalWrite(STATUSLED, HIGH);
|
|
#else
|
|
digitalWrite(STATUSLED, LOW);
|
|
#endif
|
|
#else
|
|
busses.setStatusPixel(0);
|
|
#endif
|
|
}
|
|
#endif
|
|
}
|