WLED/usermods/ST7789_display

Using the ST7789 TFT IPS 240x240 pixel color display with ESP32 boards

This usermod enables display of the following:

• Current date and time;
• Network SSID;
• IP address;
• WiFi signal strength;
• Brightness;
• Selected effect;
• Selected palette;
• Effect speed and intensity;
• Estimated current in mA;

Hardware

---

Library used

Bodmer/TFT_eSPI

Setup

---

Platformio.ini changes

In the platformio.ini file, uncomment the TFT_eSPI line within the [common] section, under lib_deps:

# platformio.ini
...
[common]
...
lib_deps =
    ...
  #For use of the TTGO T-Display ESP32 Module with integrated TFT display uncomment the following line  
    #TFT_eSPI
...

In the platformio.ini file, you must change the environment setup to build for just the esp32dev platform as follows:

Add the following lines to section:

default_envs = esp32dev
build_flags = ${common.build_flags_esp32}
  -D USERMOD_ST7789_DISPLAY
    -DUSER_SETUP_LOADED=1
    -DST7789_DRIVER=1
    -DTFT_WIDTH=240
    -DTFT_HEIGHT=240
    -DCGRAM_OFFSET=1
    -DTFT_MOSI=21
    -DTFT_SCLK=22
    -DTFT_DC=27
    -DTFT_RST=26
    -DTFT_BL=14
    -DLOAD_GLCD=1
    ;optional for WROVER
    ;-DCONFIG_SPIRAM_SUPPORT=1

Save the platformio.ini file. Once saved, the required library files should be automatically downloaded for modifications in a later step.

TFT_eSPI Library Adjustments

If you are not using PlatformIO, you need to modify a file in the TFT_eSPI library. If you followed the directions to modify and save the platformio.ini file above, the Setup24_ST7789.h file can be found in the /.pio/libdeps/esp32dev/TFT_eSPI/User_Setups/ folder.

Edit Setup_ST7789.h file and uncomment and change GPIO pin numbers in lines containing TFT_MOSI, TFT_SCLK, TFT_RST, TFT_DC.

Modify the User_Setup_Select.h by uncommenting the line containing #include <User_Setups/Setup24_ST7789.h> and commenting out the line containing #include <User_Setup.h>.

If your display uses the backlight enable pin, add this definition: #define TFT_BL with backlight enable GPIO number.