225 lines
7.0 KiB
C++
225 lines
7.0 KiB
C++
#include "wled.h"
|
||
#include <Arduino.h>
|
||
#include <U8x8lib.h> // from https://github.com/olikraus/u8g2/
|
||
#include <Wire.h>
|
||
#include <BME280I2C.h> //BME280 sensor
|
||
|
||
void UpdateBME280Data();
|
||
|
||
#define Celsius // Show temperature mesaurement in Celcius otherwise is in Fahrenheit
|
||
BME280I2C bme; // Default : forced mode, standby time = 1000 ms
|
||
// Oversampling = pressure ×1, temperature ×1, humidity ×1, filter off,
|
||
|
||
#ifdef ARDUINO_ARCH_ESP32 //ESP32 boards
|
||
uint8_t SCL_PIN = 22;
|
||
uint8_t SDA_PIN = 21;
|
||
#else //ESP8266 boards
|
||
uint8_t SCL_PIN = 5;
|
||
uint8_t SDA_PIN = 4;
|
||
// uint8_t RST_PIN = 16; // Uncoment for Heltec WiFi-Kit-8
|
||
#endif
|
||
|
||
//The SCL and SDA pins are defined here.
|
||
//ESP8266 Wemos D1 mini board use SCL=5 SDA=4 while ESP32 Wemos32 mini board use SCL=22 SDA=21
|
||
#define U8X8_PIN_SCL SCL_PIN
|
||
#define U8X8_PIN_SDA SDA_PIN
|
||
//#define U8X8_PIN_RESET RST_PIN // Uncoment for Heltec WiFi-Kit-8
|
||
|
||
// If display does not work or looks corrupted check the
|
||
// constructor reference:
|
||
// https://github.com/olikraus/u8g2/wiki/u8x8setupcpp
|
||
// or check the gallery:
|
||
// https://github.com/olikraus/u8g2/wiki/gallery
|
||
// --> First choise of cheap I2C OLED 128X32 0.91"
|
||
U8X8_SSD1306_128X32_UNIVISION_HW_I2C u8x8(U8X8_PIN_NONE, U8X8_PIN_SCL, U8X8_PIN_SDA); // Pins are Reset, SCL, SDA
|
||
// --> Second choise of cheap I2C OLED 128X64 0.96" or 1.3"
|
||
//U8X8_SSD1306_128X64_NONAME_HW_I2C u8x8(U8X8_PIN_NONE, U8X8_PIN_SCL, U8X8_PIN_SDA); // Pins are Reset, SCL, SDA
|
||
// --> Third choise of Heltec WiFi-Kit-8 OLED 128X32 0.91"
|
||
//U8X8_SSD1306_128X32_UNIVISION_HW_I2C u8x8(U8X8_PIN_RESET, U8X8_PIN_SCL, U8X8_PIN_SDA); // Constructor for Heltec WiFi-Kit-8
|
||
// gets called once at boot. Do all initialization that doesn't depend on network here
|
||
|
||
// BME280 sensor timer
|
||
long tempTimer = millis();
|
||
long lastMeasure = 0;
|
||
|
||
float SensorPressure(NAN);
|
||
float SensorTemperature(NAN);
|
||
float SensorHumidity(NAN);
|
||
|
||
void userSetup() {
|
||
u8x8.begin();
|
||
u8x8.setPowerSave(0);
|
||
u8x8.setFlipMode(1);
|
||
u8x8.setContrast(10); //Contrast setup will help to preserve OLED lifetime. In case OLED need to be brighter increase number up to 255
|
||
u8x8.setFont(u8x8_font_chroma48medium8_r);
|
||
u8x8.drawString(0, 0, "Loading...");
|
||
Wire.begin(SDA_PIN,SCL_PIN);
|
||
|
||
while(!bme.begin())
|
||
{
|
||
Serial.println("Could not find BME280I2C sensor!");
|
||
delay(1000);
|
||
}
|
||
switch(bme.chipModel())
|
||
{
|
||
case BME280::ChipModel_BME280:
|
||
Serial.println("Found BME280 sensor! Success.");
|
||
break;
|
||
case BME280::ChipModel_BMP280:
|
||
Serial.println("Found BMP280 sensor! No Humidity available.");
|
||
break;
|
||
default:
|
||
Serial.println("Found UNKNOWN sensor! Error!");
|
||
}
|
||
}
|
||
|
||
// gets called every time WiFi is (re-)connected. Initialize own network
|
||
// interfaces here
|
||
void userConnected() {}
|
||
|
||
// needRedraw marks if redraw is required to prevent often redrawing.
|
||
bool needRedraw = true;
|
||
|
||
// Next variables hold the previous known values to determine if redraw is
|
||
// required.
|
||
String knownSsid = "";
|
||
IPAddress knownIp;
|
||
uint8_t knownBrightness = 0;
|
||
uint8_t knownMode = 0;
|
||
uint8_t knownPalette = 0;
|
||
|
||
long lastUpdate = 0;
|
||
long lastRedraw = 0;
|
||
bool displayTurnedOff = false;
|
||
// How often we are redrawing screen
|
||
#define USER_LOOP_REFRESH_RATE_MS 5000
|
||
|
||
void userLoop() {
|
||
|
||
// BME280 sensor MQTT publishing
|
||
tempTimer = millis();
|
||
// Timer to publish new sensor data every 60 seconds
|
||
if (tempTimer - lastMeasure > 60000)
|
||
{
|
||
lastMeasure = tempTimer;
|
||
|
||
// Check if MQTT Connected, otherwise it will crash the 8266
|
||
if (mqtt != nullptr)
|
||
{
|
||
UpdateBME280Data();
|
||
float board_temperature = SensorTemperature;
|
||
float board_pressure = SensorPressure;
|
||
float board_humidity = SensorHumidity;
|
||
|
||
// Create string populated with user defined device topic from the UI, and the read temperature, humidity and pressure. Then publish to MQTT server.
|
||
String t = String(mqttDeviceTopic);
|
||
t += "/temperature";
|
||
mqtt->publish(t.c_str(), 0, true, String(board_temperature).c_str());
|
||
String p = String(mqttDeviceTopic);
|
||
p += "/pressure";
|
||
mqtt->publish(p.c_str(), 0, true, String(board_pressure).c_str());
|
||
String h = String(mqttDeviceTopic);
|
||
h += "/humidity";
|
||
mqtt->publish(h.c_str(), 0, true, String(board_humidity).c_str());
|
||
}
|
||
}
|
||
|
||
// Check if we time interval for redrawing passes.
|
||
if (millis() - lastUpdate < USER_LOOP_REFRESH_RATE_MS) {
|
||
return;
|
||
}
|
||
lastUpdate = millis();
|
||
|
||
// Turn off display after 3 minutes with no change.
|
||
if(!displayTurnedOff && millis() - lastRedraw > 3*60*1000) {
|
||
u8x8.setPowerSave(1);
|
||
displayTurnedOff = true;
|
||
}
|
||
|
||
// Check if values which are shown on display changed from the last time.
|
||
if (((apActive) ? String(apSSID) : WiFi.SSID()) != knownSsid) {
|
||
needRedraw = true;
|
||
} else if (knownIp != (apActive ? IPAddress(4, 3, 2, 1) : WiFi.localIP())) {
|
||
needRedraw = true;
|
||
} else if (knownBrightness != bri) {
|
||
needRedraw = true;
|
||
} else if (knownMode != strip.getMode()) {
|
||
needRedraw = true;
|
||
} else if (knownPalette != strip.getSegment(0).palette) {
|
||
needRedraw = true;
|
||
}
|
||
|
||
if (!needRedraw) {
|
||
return;
|
||
}
|
||
needRedraw = false;
|
||
|
||
if (displayTurnedOff)
|
||
{
|
||
u8x8.setPowerSave(0);
|
||
displayTurnedOff = false;
|
||
}
|
||
lastRedraw = millis();
|
||
|
||
// Update last known values.
|
||
#if defined(ESP8266)
|
||
knownSsid = apActive ? WiFi.softAPSSID() : WiFi.SSID();
|
||
#else
|
||
knownSsid = WiFi.SSID();
|
||
#endif
|
||
knownIp = apActive ? IPAddress(4, 3, 2, 1) : WiFi.localIP();
|
||
knownBrightness = bri;
|
||
knownMode = strip.getMode();
|
||
knownPalette = strip.getSegment(0).palette;
|
||
u8x8.clear();
|
||
u8x8.setFont(u8x8_font_chroma48medium8_r);
|
||
|
||
// First row with Wifi name
|
||
u8x8.setCursor(1, 0);
|
||
u8x8.print(knownSsid.substring(0, u8x8.getCols() > 1 ? u8x8.getCols() - 2 : 0));
|
||
// Print `~` char to indicate that SSID is longer, than owr dicplay
|
||
if (knownSsid.length() > u8x8.getCols())
|
||
u8x8.print("~");
|
||
|
||
// Second row with IP or Psssword
|
||
u8x8.setCursor(1, 1);
|
||
// Print password in AP mode and if led is OFF.
|
||
if (apActive && bri == 0)
|
||
u8x8.print(apPass);
|
||
else
|
||
u8x8.print(knownIp);
|
||
|
||
// Third row with mode name
|
||
u8x8.setCursor(2, 2);
|
||
char lineBuffer[17];
|
||
extractModeName(knownMode, JSON_mode_names, lineBuffer, 16);
|
||
u8x8.print(lineBuffer);
|
||
|
||
// Fourth row with palette name
|
||
u8x8.setCursor(2, 3);
|
||
extractModeName(knownPalette, JSON_palette_names, lineBuffer, 16);
|
||
u8x8.print(lineBuffer);
|
||
|
||
u8x8.setFont(u8x8_font_open_iconic_embedded_1x1);
|
||
u8x8.drawGlyph(0, 0, 80); // wifi icon
|
||
u8x8.drawGlyph(0, 1, 68); // home icon
|
||
u8x8.setFont(u8x8_font_open_iconic_weather_2x2);
|
||
u8x8.drawGlyph(0, 2, 66 + (bri > 0 ? 3 : 0)); // sun/moon icon
|
||
}
|
||
|
||
void UpdateBME280Data() {
|
||
float temp(NAN), hum(NAN), pres(NAN);
|
||
#ifdef Celsius
|
||
BME280::TempUnit tempUnit(BME280::TempUnit_Celsius);
|
||
BME280::PresUnit presUnit(BME280::PresUnit_Pa);
|
||
bme.read(pres, temp, hum, tempUnit, presUnit);
|
||
#else
|
||
BME280::TempUnit tempUnit(BME280::TempUnit_Fahrenheit);
|
||
BME280::PresUnit presUnit(BME280::PresUnit_Pa);
|
||
bme.read(pres, temp, hum, tempUnit, presUnit);
|
||
#endif
|
||
SensorTemperature=temp;
|
||
SensorHumidity=hum;
|
||
SensorPressure=pres;
|
||
}
|