502 lines
21 KiB
C
502 lines
21 KiB
C
#ifndef WLED_CONST_H
|
|
#define WLED_CONST_H
|
|
|
|
/*
|
|
* Readability defines and their associated numerical values + compile-time constants
|
|
*/
|
|
|
|
#define GRADIENT_PALETTE_COUNT 58
|
|
|
|
//Defaults
|
|
#define DEFAULT_CLIENT_SSID "Your_Network"
|
|
#define DEFAULT_AP_SSID "WLED-AP"
|
|
#define DEFAULT_AP_PASS "wled1234"
|
|
#define DEFAULT_OTA_PASS "wledota"
|
|
|
|
//increase if you need more
|
|
#ifndef WLED_MAX_USERMODS
|
|
#ifdef ESP8266
|
|
#define WLED_MAX_USERMODS 4
|
|
#else
|
|
#define WLED_MAX_USERMODS 6
|
|
#endif
|
|
#endif
|
|
|
|
#ifndef WLED_MAX_BUSSES
|
|
#ifdef ESP8266
|
|
#define WLED_MAX_BUSSES 3
|
|
#define WLED_MIN_VIRTUAL_BUSSES 2
|
|
#else
|
|
#if defined(CONFIG_IDF_TARGET_ESP32C3) // 2 RMT, 6 LEDC, only has 1 I2S but NPB does not support it ATM
|
|
#define WLED_MAX_BUSSES 3 // will allow 2 digital & 1 analog (or the other way around)
|
|
#define WLED_MIN_VIRTUAL_BUSSES 3
|
|
#elif defined(CONFIG_IDF_TARGET_ESP32S2) // 4 RMT, 8 LEDC, only has 1 I2S bus, supported in NPB
|
|
#if defined(USERMOD_AUDIOREACTIVE) // requested by @softhack007 https://github.com/blazoncek/WLED/issues/33
|
|
#define WLED_MAX_BUSSES 6 // will allow 4 digital & 2 analog
|
|
#define WLED_MIN_VIRTUAL_BUSSES 4
|
|
#else
|
|
#define WLED_MAX_BUSSES 7 // will allow 5 digital & 2 analog
|
|
#define WLED_MIN_VIRTUAL_BUSSES 3
|
|
#endif
|
|
#elif defined(CONFIG_IDF_TARGET_ESP32S3) // 4 RMT, 8 LEDC, has 2 I2S but NPB does not support them ATM
|
|
#define WLED_MAX_BUSSES 6 // will allow 4 digital & 2 analog
|
|
#define WLED_MIN_VIRTUAL_BUSSES 4
|
|
#else
|
|
#if defined(USERMOD_AUDIOREACTIVE) // requested by @softhack007 https://github.com/blazoncek/WLED/issues/33
|
|
#define WLED_MAX_BUSSES 8
|
|
#define WLED_MIN_VIRTUAL_BUSSES 2
|
|
#else
|
|
#define WLED_MAX_BUSSES 10
|
|
#define WLED_MIN_VIRTUAL_BUSSES 0
|
|
#endif
|
|
#endif
|
|
#endif
|
|
#else
|
|
#ifdef ESP8266
|
|
#if WLED_MAX_BUSES > 5
|
|
#error Maximum number of buses is 5.
|
|
#endif
|
|
#define WLED_MIN_VIRTUAL_BUSSES (5-WLED_MAX_BUSSES)
|
|
#else
|
|
#if WLED_MAX_BUSES > 10
|
|
#error Maximum number of buses is 10.
|
|
#endif
|
|
#define WLED_MIN_VIRTUAL_BUSSES (10-WLED_MAX_BUSSES)
|
|
#endif
|
|
#endif
|
|
|
|
#ifndef WLED_MAX_BUTTONS
|
|
#ifdef ESP8266
|
|
#define WLED_MAX_BUTTONS 2
|
|
#else
|
|
#define WLED_MAX_BUTTONS 4
|
|
#endif
|
|
#endif
|
|
|
|
#ifdef ESP8266
|
|
#define WLED_MAX_COLOR_ORDER_MAPPINGS 5
|
|
#else
|
|
#define WLED_MAX_COLOR_ORDER_MAPPINGS 10
|
|
#endif
|
|
|
|
#if defined(WLED_MAX_LEDMAPS) && (WLED_MAX_LEDMAPS > 32 || WLED_MAX_LEDMAPS < 10)
|
|
#undef WLED_MAX_LEDMAPS
|
|
#endif
|
|
#ifndef WLED_MAX_LEDMAPS
|
|
#ifdef ESP8266
|
|
#define WLED_MAX_LEDMAPS 10
|
|
#else
|
|
#define WLED_MAX_LEDMAPS 16
|
|
#endif
|
|
#endif
|
|
|
|
//Usermod IDs
|
|
#define USERMOD_ID_RESERVED 0 //Unused. Might indicate no usermod present
|
|
#define USERMOD_ID_UNSPECIFIED 1 //Default value for a general user mod that does not specify a custom ID
|
|
#define USERMOD_ID_EXAMPLE 2 //Usermod "usermod_v2_example.h"
|
|
#define USERMOD_ID_TEMPERATURE 3 //Usermod "usermod_temperature.h"
|
|
#define USERMOD_ID_FIXNETSERVICES 4 //Usermod "usermod_Fix_unreachable_netservices.h"
|
|
#define USERMOD_ID_PIRSWITCH 5 //Usermod "usermod_PIR_sensor_switch.h"
|
|
#define USERMOD_ID_IMU 6 //Usermod "usermod_mpu6050_imu.h"
|
|
#define USERMOD_ID_FOUR_LINE_DISP 7 //Usermod "usermod_v2_four_line_display.h
|
|
#define USERMOD_ID_ROTARY_ENC_UI 8 //Usermod "usermod_v2_rotary_encoder_ui.h"
|
|
#define USERMOD_ID_AUTO_SAVE 9 //Usermod "usermod_v2_auto_save.h"
|
|
#define USERMOD_ID_DHT 10 //Usermod "usermod_dht.h"
|
|
#define USERMOD_ID_MODE_SORT 11 //Usermod "usermod_v2_mode_sort.h"
|
|
#define USERMOD_ID_VL53L0X 12 //Usermod "usermod_vl53l0x_gestures.h"
|
|
#define USERMOD_ID_MULTI_RELAY 13 //Usermod "usermod_multi_relay.h"
|
|
#define USERMOD_ID_ANIMATED_STAIRCASE 14 //Usermod "Animated_Staircase.h"
|
|
#define USERMOD_ID_RTC 15 //Usermod "usermod_rtc.h"
|
|
#define USERMOD_ID_ELEKSTUBE_IPS 16 //Usermod "usermod_elekstube_ips.h"
|
|
#define USERMOD_ID_SN_PHOTORESISTOR 17 //Usermod "usermod_sn_photoresistor.h"
|
|
#define USERMOD_ID_BATTERY 18 //Usermod "usermod_v2_battery.h"
|
|
#define USERMOD_ID_PWM_FAN 19 //Usermod "usermod_PWM_fan.h"
|
|
#define USERMOD_ID_BH1750 20 //Usermod "usermod_bh1750.h"
|
|
#define USERMOD_ID_SEVEN_SEGMENT_DISPLAY 21 //Usermod "usermod_v2_seven_segment_display.h"
|
|
#define USERMOD_RGB_ROTARY_ENCODER 22 //Usermod "rgb-rotary-encoder.h"
|
|
#define USERMOD_ID_QUINLED_AN_PENTA 23 //Usermod "quinled-an-penta.h"
|
|
#define USERMOD_ID_SSDR 24 //Usermod "usermod_v2_seven_segment_display_reloaded.h"
|
|
#define USERMOD_ID_CRONIXIE 25 //Usermod "usermod_cronixie.h"
|
|
#define USERMOD_ID_WIZLIGHTS 26 //Usermod "wizlights.h"
|
|
#define USERMOD_ID_WORDCLOCK 27 //Usermod "usermod_v2_word_clock.h"
|
|
#define USERMOD_ID_MY9291 28 //Usermod "usermod_MY9291.h"
|
|
#define USERMOD_ID_SI7021_MQTT_HA 29 //Usermod "usermod_si7021_mqtt_ha.h"
|
|
#define USERMOD_ID_BME280 30 //Usermod "usermod_bme280.h
|
|
#define USERMOD_ID_SMARTNEST 31 //Usermod "usermod_smartnest.h"
|
|
#define USERMOD_ID_AUDIOREACTIVE 32 //Usermod "audioreactive.h"
|
|
#define USERMOD_ID_ANALOG_CLOCK 33 //Usermod "Analog_Clock.h"
|
|
#define USERMOD_ID_PING_PONG_CLOCK 34 //Usermod "usermod_v2_ping_pong_clock.h"
|
|
#define USERMOD_ID_ADS1115 35 //Usermod "usermod_ads1115.h"
|
|
#define USERMOD_ID_BOBLIGHT 36 //Usermod "boblight.h"
|
|
#define USERMOD_ID_SD_CARD 37 //Usermod "usermod_sd_card.h"
|
|
#define USERMOD_ID_PWM_OUTPUTS 38 //Usermod "usermod_pwm_outputs.h
|
|
#define USERMOD_ID_SHT 39 //Usermod "usermod_sht.h
|
|
#define USERMOD_ID_KLIPPER 40 // Usermod Klipper percentage
|
|
|
|
//Access point behavior
|
|
#define AP_BEHAVIOR_BOOT_NO_CONN 0 //Open AP when no connection after boot
|
|
#define AP_BEHAVIOR_NO_CONN 1 //Open when no connection (either after boot or if connection is lost)
|
|
#define AP_BEHAVIOR_ALWAYS 2 //Always open
|
|
#define AP_BEHAVIOR_BUTTON_ONLY 3 //Only when button pressed for 6 sec
|
|
|
|
//Notifier callMode
|
|
#define CALL_MODE_INIT 0 //no updates on init, can be used to disable updates
|
|
#define CALL_MODE_DIRECT_CHANGE 1
|
|
#define CALL_MODE_BUTTON 2 //default button actions applied to selected segments
|
|
#define CALL_MODE_NOTIFICATION 3
|
|
#define CALL_MODE_NIGHTLIGHT 4
|
|
#define CALL_MODE_NO_NOTIFY 5
|
|
#define CALL_MODE_FX_CHANGED 6 //no longer used
|
|
#define CALL_MODE_HUE 7
|
|
#define CALL_MODE_PRESET_CYCLE 8
|
|
#define CALL_MODE_BLYNK 9 //no longer used
|
|
#define CALL_MODE_ALEXA 10
|
|
#define CALL_MODE_WS_SEND 11 //special call mode, not for notifier, updates websocket only
|
|
#define CALL_MODE_BUTTON_PRESET 12 //button/IR JSON preset/macro
|
|
|
|
//RGB to RGBW conversion mode
|
|
#define RGBW_MODE_MANUAL_ONLY 0 // No automatic white channel calculation. Manual white channel slider
|
|
#define RGBW_MODE_AUTO_BRIGHTER 1 // New algorithm. Adds as much white as the darkest RGBW channel
|
|
#define RGBW_MODE_AUTO_ACCURATE 2 // New algorithm. Adds as much white as the darkest RGBW channel and subtracts this amount from each RGB channel
|
|
#define RGBW_MODE_DUAL 3 // Manual slider + auto calculation. Automatically calculates only if manual slider is set to off (0)
|
|
#define RGBW_MODE_MAX 4 // Sets white to the value of the brightest RGB channel (good for white-only LEDs without any RGB)
|
|
//#define RGBW_MODE_LEGACY 4 // Old floating algorithm. Too slow for realtime and palette support (unused)
|
|
#define AW_GLOBAL_DISABLED 255 // Global auto white mode override disabled. Per-bus setting is used
|
|
|
|
//realtime modes
|
|
#define REALTIME_MODE_INACTIVE 0
|
|
#define REALTIME_MODE_GENERIC 1
|
|
#define REALTIME_MODE_UDP 2
|
|
#define REALTIME_MODE_HYPERION 3
|
|
#define REALTIME_MODE_E131 4
|
|
#define REALTIME_MODE_ADALIGHT 5
|
|
#define REALTIME_MODE_ARTNET 6
|
|
#define REALTIME_MODE_TPM2NET 7
|
|
#define REALTIME_MODE_DDP 8
|
|
|
|
//realtime override modes
|
|
#define REALTIME_OVERRIDE_NONE 0
|
|
#define REALTIME_OVERRIDE_ONCE 1
|
|
#define REALTIME_OVERRIDE_ALWAYS 2
|
|
|
|
//E1.31 DMX modes
|
|
#define DMX_MODE_DISABLED 0 //not used
|
|
#define DMX_MODE_SINGLE_RGB 1 //all LEDs same RGB color (3 channels)
|
|
#define DMX_MODE_SINGLE_DRGB 2 //all LEDs same RGB color and master dimmer (4 channels)
|
|
#define DMX_MODE_EFFECT 3 //trigger standalone effects of WLED (15 channels)
|
|
#define DMX_MODE_EFFECT_W 7 //trigger standalone effects of WLED (18 channels)
|
|
#define DMX_MODE_MULTIPLE_RGB 4 //every LED is addressed with its own RGB (ledCount * 3 channels)
|
|
#define DMX_MODE_MULTIPLE_DRGB 5 //every LED is addressed with its own RGB and share a master dimmer (ledCount * 3 + 1 channels)
|
|
#define DMX_MODE_MULTIPLE_RGBW 6 //every LED is addressed with its own RGBW (ledCount * 4 channels)
|
|
#define DMX_MODE_EFFECT_SEGMENT 8 //trigger standalone effects of WLED (15 channels per segement)
|
|
#define DMX_MODE_EFFECT_SEGMENT_W 9 //trigger standalone effects of WLED (18 channels per segement)
|
|
#define DMX_MODE_PRESET 10 //apply presets (1 channel)
|
|
|
|
//Light capability byte (unused) 0bRCCCTTTT
|
|
//bits 0/1/2/3: specifies a type of LED driver. A single "driver" may have different chip models but must have the same protocol/behavior
|
|
//bits 4/5/6: specifies the class of LED driver - 0b000 (dec. 0-15) unconfigured/reserved
|
|
// - 0b001 (dec. 16-31) digital (data pin only)
|
|
// - 0b010 (dec. 32-47) analog (PWM)
|
|
// - 0b011 (dec. 48-63) digital (data + clock / SPI)
|
|
// - 0b100 (dec. 64-79) unused/reserved
|
|
// - 0b101 (dec. 80-95) virtual network busses
|
|
// - 0b110 (dec. 96-111) unused/reserved
|
|
// - 0b111 (dec. 112-127) unused/reserved
|
|
//bit 7 is reserved and set to 0
|
|
|
|
#define TYPE_NONE 0 //light is not configured
|
|
#define TYPE_RESERVED 1 //unused. Might indicate a "virtual" light
|
|
//Digital types (data pin only) (16-31)
|
|
#define TYPE_WS2812_1CH 18 //white-only chips (1 channel per IC) (unused)
|
|
#define TYPE_WS2812_1CH_X3 19 //white-only chips (3 channels per IC)
|
|
#define TYPE_WS2812_2CH_X3 20 //CCT chips (1st IC controls WW + CW of 1st zone and CW of 2nd zone, 2nd IC controls WW of 2nd zone and WW + CW of 3rd zone)
|
|
#define TYPE_WS2812_WWA 21 //amber + warm + cold white
|
|
#define TYPE_WS2812_RGB 22
|
|
#define TYPE_GS8608 23 //same driver as WS2812, but will require signal 2x per second (else displays test pattern)
|
|
#define TYPE_WS2811_400KHZ 24 //half-speed WS2812 protocol, used by very old WS2811 units
|
|
#define TYPE_TM1829 25
|
|
#define TYPE_UCS8903 26
|
|
#define TYPE_UCS8904 29
|
|
#define TYPE_SK6812_RGBW 30
|
|
#define TYPE_TM1814 31
|
|
//"Analog" types (PWM) (32-47)
|
|
#define TYPE_ONOFF 40 //binary output (relays etc.)
|
|
#define TYPE_ANALOG_1CH 41 //single channel PWM. Uses value of brightest RGBW channel
|
|
#define TYPE_ANALOG_2CH 42 //analog WW + CW
|
|
#define TYPE_ANALOG_3CH 43 //analog RGB
|
|
#define TYPE_ANALOG_4CH 44 //analog RGBW
|
|
#define TYPE_ANALOG_5CH 45 //analog RGB + WW + CW
|
|
//Digital types (data + clock / SPI) (48-63)
|
|
#define TYPE_WS2801 50
|
|
#define TYPE_APA102 51
|
|
#define TYPE_LPD8806 52
|
|
#define TYPE_P9813 53
|
|
#define TYPE_LPD6803 54
|
|
//Network types (master broadcast) (80-95)
|
|
#define TYPE_NET_DDP_RGB 80 //network DDP RGB bus (master broadcast bus)
|
|
#define TYPE_NET_E131_RGB 81 //network E131 RGB bus (master broadcast bus, unused)
|
|
#define TYPE_NET_ARTNET_RGB 82 //network ArtNet RGB bus (master broadcast bus, unused)
|
|
#define TYPE_NET_DDP_RGBW 88 //network DDP RGBW bus (master broadcast bus)
|
|
|
|
#define IS_DIGITAL(t) ((t) & 0x10) //digital are 16-31 and 48-63
|
|
#define IS_PWM(t) ((t) > 40 && (t) < 46)
|
|
#define NUM_PWM_PINS(t) ((t) - 40) //for analog PWM 41-45 only
|
|
#define IS_2PIN(t) ((t) > 47)
|
|
|
|
//Color orders
|
|
#define COL_ORDER_GRB 0 //GRB(w),defaut
|
|
#define COL_ORDER_RGB 1 //common for WS2811
|
|
#define COL_ORDER_BRG 2
|
|
#define COL_ORDER_RBG 3
|
|
#define COL_ORDER_BGR 4
|
|
#define COL_ORDER_GBR 5
|
|
#define COL_ORDER_MAX 5
|
|
|
|
|
|
//Button type
|
|
#define BTN_TYPE_NONE 0
|
|
#define BTN_TYPE_RESERVED 1
|
|
#define BTN_TYPE_PUSH 2
|
|
#define BTN_TYPE_PUSH_ACT_HIGH 3
|
|
#define BTN_TYPE_SWITCH 4
|
|
#define BTN_TYPE_PIR_SENSOR 5
|
|
#define BTN_TYPE_TOUCH 6
|
|
#define BTN_TYPE_ANALOG 7
|
|
#define BTN_TYPE_ANALOG_INVERTED 8
|
|
|
|
//Ethernet board types
|
|
#define WLED_NUM_ETH_TYPES 11
|
|
|
|
#define WLED_ETH_NONE 0
|
|
#define WLED_ETH_WT32_ETH01 1
|
|
#define WLED_ETH_ESP32_POE 2
|
|
#define WLED_ETH_WESP32 3
|
|
#define WLED_ETH_QUINLED 4
|
|
#define WLED_ETH_TWILIGHTLORD 5
|
|
#define WLED_ETH_ESP32DEUX 6
|
|
#define WLED_ETH_ESP32ETHKITVE 7
|
|
#define WLED_ETH_QUINLED_OCTA 8
|
|
#define WLED_ETH_ABCWLEDV43ETH 9
|
|
#define WLED_ETH_SERG74 10
|
|
|
|
//Hue error codes
|
|
#define HUE_ERROR_INACTIVE 0
|
|
#define HUE_ERROR_UNAUTHORIZED 1
|
|
#define HUE_ERROR_LIGHTID 3
|
|
#define HUE_ERROR_PUSHLINK 101
|
|
#define HUE_ERROR_JSON_PARSING 250
|
|
#define HUE_ERROR_TIMEOUT 251
|
|
#define HUE_ERROR_ACTIVE 255
|
|
|
|
//Segment option byte bits
|
|
#define SEG_OPTION_SELECTED 0
|
|
#define SEG_OPTION_REVERSED 1
|
|
#define SEG_OPTION_ON 2
|
|
#define SEG_OPTION_MIRROR 3 //Indicates that the effect will be mirrored within the segment
|
|
#define SEG_OPTION_FREEZE 4 //Segment contents will not be refreshed
|
|
#define SEG_OPTION_RESET 5 //Segment runtime requires reset
|
|
#define SEG_OPTION_TRANSITIONAL 6
|
|
#define SEG_OPTION_REVERSED_Y 7
|
|
#define SEG_OPTION_MIRROR_Y 8
|
|
#define SEG_OPTION_TRANSPOSED 9
|
|
|
|
//Segment differs return byte
|
|
#define SEG_DIFFERS_BRI 0x01 // opacity
|
|
#define SEG_DIFFERS_OPT 0x02 // all segment options except: selected, reset & transitional
|
|
#define SEG_DIFFERS_COL 0x04 // colors
|
|
#define SEG_DIFFERS_FX 0x08 // effect/mode parameters
|
|
#define SEG_DIFFERS_BOUNDS 0x10 // segment start/stop ounds
|
|
#define SEG_DIFFERS_GSO 0x20 // grouping, spacing & offset
|
|
#define SEG_DIFFERS_SEL 0x80 // selected
|
|
|
|
//Playlist option byte
|
|
#define PL_OPTION_SHUFFLE 0x01
|
|
|
|
// Segment capability byte
|
|
#define SEG_CAPABILITY_RGB 0x01
|
|
#define SEG_CAPABILITY_W 0x02
|
|
#define SEG_CAPABILITY_CCT 0x04
|
|
|
|
// WLED Error modes
|
|
#define ERR_NONE 0 // All good :)
|
|
#define ERR_EEP_COMMIT 2 // Could not commit to EEPROM (wrong flash layout?)
|
|
#define ERR_NOBUF 3 // JSON buffer was not released in time, request cannot be handled at this time
|
|
#define ERR_JSON 9 // JSON parsing failed (input too large?)
|
|
#define ERR_FS_BEGIN 10 // Could not init filesystem (no partition?)
|
|
#define ERR_FS_QUOTA 11 // The FS is full or the maximum file size is reached
|
|
#define ERR_FS_PLOAD 12 // It was attempted to load a preset that does not exist
|
|
#define ERR_FS_IRLOAD 13 // It was attempted to load an IR JSON cmd, but the "ir.json" file does not exist
|
|
#define ERR_FS_GENERAL 19 // A general unspecified filesystem error occured
|
|
#define ERR_OVERTEMP 30 // An attached temperature sensor has measured above threshold temperature (not implemented)
|
|
#define ERR_OVERCURRENT 31 // An attached current sensor has measured a current above the threshold (not implemented)
|
|
#define ERR_UNDERVOLT 32 // An attached voltmeter has measured a voltage below the threshold (not implemented)
|
|
|
|
//Timer mode types
|
|
#define NL_MODE_SET 0 //After nightlight time elapsed, set to target brightness
|
|
#define NL_MODE_FADE 1 //Fade to target brightness gradually
|
|
#define NL_MODE_COLORFADE 2 //Fade to target brightness and secondary color gradually
|
|
#define NL_MODE_SUN 3 //Sunrise/sunset. Target brightness is set immediately, then Sunrise effect is started. Max 60 min.
|
|
|
|
|
|
#define NTP_PACKET_SIZE 48
|
|
|
|
//maximum number of rendered LEDs - this does not have to match max. physical LEDs, e.g. if there are virtual busses
|
|
#ifndef MAX_LEDS
|
|
#ifdef ESP8266
|
|
#define MAX_LEDS 1664 //can't rely on memory limit to limit this to 1600 LEDs
|
|
#else
|
|
#define MAX_LEDS 8192
|
|
#endif
|
|
#endif
|
|
|
|
#ifndef MAX_LED_MEMORY
|
|
#ifdef ESP8266
|
|
#define MAX_LED_MEMORY 4000
|
|
#else
|
|
#if defined(ARDUINO_ARCH_ESP32S2) || defined(ARDUINO_ARCH_ESP32C3)
|
|
#define MAX_LED_MEMORY 32000
|
|
#else
|
|
#define MAX_LED_MEMORY 64000
|
|
#endif
|
|
#endif
|
|
#endif
|
|
|
|
#ifndef MAX_LEDS_PER_BUS
|
|
#define MAX_LEDS_PER_BUS 2048 // may not be enough for fast LEDs (i.e. APA102)
|
|
#endif
|
|
|
|
// string temp buffer (now stored in stack locally)
|
|
#ifdef ESP8266
|
|
#define SETTINGS_STACK_BUF_SIZE 2048
|
|
#else
|
|
#define SETTINGS_STACK_BUF_SIZE 3096
|
|
#endif
|
|
|
|
#ifdef WLED_USE_ETHERNET
|
|
#define E131_MAX_UNIVERSE_COUNT 20
|
|
#else
|
|
#ifdef ESP8266
|
|
#define E131_MAX_UNIVERSE_COUNT 9
|
|
#else
|
|
#define E131_MAX_UNIVERSE_COUNT 12
|
|
#endif
|
|
#endif
|
|
|
|
#ifndef ABL_MILLIAMPS_DEFAULT
|
|
#define ABL_MILLIAMPS_DEFAULT 850 // auto lower brightness to stay close to milliampere limit
|
|
#else
|
|
#if ABL_MILLIAMPS_DEFAULT == 0 // disable ABL
|
|
#elif ABL_MILLIAMPS_DEFAULT < 250 // make sure value is at least 250
|
|
#warning "make sure value is at least 250"
|
|
#define ABL_MILLIAMPS_DEFAULT 250
|
|
#endif
|
|
#endif
|
|
|
|
// PWM settings
|
|
#ifndef WLED_PWM_FREQ
|
|
#ifdef ESP8266
|
|
#define WLED_PWM_FREQ 880 //PWM frequency proven as good for LEDs
|
|
#else
|
|
#define WLED_PWM_FREQ 19531
|
|
#endif
|
|
#endif
|
|
|
|
#define TOUCH_THRESHOLD 32 // limit to recognize a touch, higher value means more sensitive
|
|
|
|
// Size of buffer for API JSON object (increase for more segments)
|
|
#ifdef ESP8266
|
|
#define JSON_BUFFER_SIZE 10240
|
|
#else
|
|
#define JSON_BUFFER_SIZE 24576
|
|
#endif
|
|
|
|
//#define MIN_HEAP_SIZE (8k for AsyncWebServer)
|
|
#define MIN_HEAP_SIZE 8192
|
|
|
|
// Maximum size of node map (list of other WLED instances)
|
|
#ifdef ESP8266
|
|
#define WLED_MAX_NODES 24
|
|
#else
|
|
#define WLED_MAX_NODES 150
|
|
#endif
|
|
|
|
//this is merely a default now and can be changed at runtime
|
|
#ifndef LEDPIN
|
|
#if defined(ESP8266) || (defined(ARDUINO_ARCH_ESP32) && defined(WLED_USE_PSRAM)) || defined(CONFIG_IDF_TARGET_ESP32C3)
|
|
#define LEDPIN 2 // GPIO2 (D4) on Wemod D1 mini compatible boards
|
|
#else
|
|
#define LEDPIN 16 // aligns with GPIO2 (D4) on Wemos D1 mini32 compatible boards
|
|
#endif
|
|
#endif
|
|
|
|
#ifdef WLED_ENABLE_DMX
|
|
#if (LEDPIN == 2)
|
|
#undef LEDPIN
|
|
#define LEDPIN 1
|
|
#warning "Pin conflict compiling with DMX and LEDs on pin 2. The default LED pin has been changed to pin 1."
|
|
#endif
|
|
#endif
|
|
|
|
#ifndef DEFAULT_LED_COUNT
|
|
#define DEFAULT_LED_COUNT 30
|
|
#endif
|
|
|
|
#define INTERFACE_UPDATE_COOLDOWN 2000 //time in ms to wait between websockets, alexa, and MQTT updates
|
|
|
|
// HW_PIN_SCL & HW_PIN_SDA are used for information in usermods settings page and usermods themselves
|
|
// which GPIO pins are actually used in a hardwarea layout (controller board)
|
|
#if defined(I2CSCLPIN) && !defined(HW_PIN_SCL)
|
|
#define HW_PIN_SCL I2CSCLPIN
|
|
#endif
|
|
#if defined(I2CSDAPIN) && !defined(HW_PIN_SDA)
|
|
#define HW_PIN_SDA I2CSDAPIN
|
|
#endif
|
|
// you cannot change HW I2C pins on 8266
|
|
#if defined(ESP8266) && defined(HW_PIN_SCL)
|
|
#undef HW_PIN_SCL
|
|
#endif
|
|
#if defined(ESP8266) && defined(HW_PIN_SDA)
|
|
#undef HW_PIN_SDA
|
|
#endif
|
|
// defaults for 1st I2C on ESP32 (Wire global)
|
|
#ifndef HW_PIN_SCL
|
|
#define HW_PIN_SCL SCL
|
|
#endif
|
|
#ifndef HW_PIN_SDA
|
|
#define HW_PIN_SDA SDA
|
|
#endif
|
|
|
|
// HW_PIN_SCLKSPI & HW_PIN_MOSISPI & HW_PIN_MISOSPI are used for information in usermods settings page and usermods themselves
|
|
// which GPIO pins are actually used in a hardwarea layout (controller board)
|
|
#if defined(SPISCLKPIN) && !defined(HW_PIN_CLOCKSPI)
|
|
#define HW_PIN_CLOCKSPI SPISCLKPIN
|
|
#endif
|
|
#if defined(SPIMOSIPIN) && !defined(HW_PIN_MOSISPI)
|
|
#define HW_PIN_MOSISPI SPIMOSIPIN
|
|
#endif
|
|
#if defined(SPIMISOPIN) && !defined(HW_PIN_MISOSPI)
|
|
#define HW_PIN_MISOSPI SPIMISOPIN
|
|
#endif
|
|
// you cannot change HW SPI pins on 8266
|
|
#if defined(ESP8266) && defined(HW_PIN_CLOCKSPI)
|
|
#undef HW_PIN_CLOCKSPI
|
|
#endif
|
|
#if defined(ESP8266) && defined(HW_PIN_DATASPI)
|
|
#undef HW_PIN_DATASPI
|
|
#endif
|
|
#if defined(ESP8266) && defined(HW_PIN_MISOSPI)
|
|
#undef HW_PIN_MISOSPI
|
|
#endif
|
|
// defaults for VSPI on ESP32 (SPI global, SPI.cpp) as HSPI is used by WLED (bus_wrapper.h)
|
|
#ifndef HW_PIN_CLOCKSPI
|
|
#define HW_PIN_CLOCKSPI SCK
|
|
#endif
|
|
#ifndef HW_PIN_DATASPI
|
|
#define HW_PIN_DATASPI MOSI
|
|
#endif
|
|
#ifndef HW_PIN_MISOSPI
|
|
#define HW_PIN_MISOSPI MISO
|
|
#endif
|
|
|
|
#endif
|