lba.gitea/WLED
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
746a8badac
WLED/platformio.ini
Rolf 746a8badac
Animated Staircase Usermod (#1763) 
* Initial version of the PIR Staircase wipe up/down.

* Add pulldown reminder

* Workaround for missing D6 and D7 definitions on esp32dev

* Add pinouts for d1 mini (esp8266 and esp32) and NodeMCU (and Arduino)

* These IO pins on all these boards... NodeMCU and d1_mini esp32 supported. The others? Fingers crossed.

* Changed to not collide with led strip pins

* PIR on GPIO 15 and 16 on esp32 d1 mini

* Removed PIN number ifdefs, it is impossible to match all boards

* Settings in flash, info and API

* Update README.md

* Small doc changes

* Improved README

* Fixed error in reading configuration

* Add API documentation

* Documentation and code cleanup

* Add enable/disable to API settings

* Restore segment state when disabling plugin

* Add debounce

* Set segments in animation mode

* Set segments in animation mode

* Add support for HR04 sensors

* Add preliminary description for  using an HR04 sensor

* Fixed typenumber and linked to datasheet

* Moved config away from defines to prevent user error

* Trigger Sensors through API

* Rename scripts folder so that it's name doesn't clash with the `pio` command (prevents platformIO in VSCode to work properly on Mac)

* Bugfix for detection problems

* Separated config from code

* Renamed Signal to Trigger pin

* Filename adjusted

* Clarifications and additions to README

* Fixed references to pio scripts

* Fixed API trigger bug

* Adjustments to README.md

* More efficient use of flash cycles, better naming

* Bugfix: bottom sensor was not read properly

* Renamed to Animated_Staircase

* Add note on ultrasonic sensor and esp32

* Better naming of defines

* Bugfix: Swipe down started with two steps.

* Removed upload port in nodemcuv2 section

Co-authored-by: Rolf <rolf@phobos.local>
Co-authored-by: Rolf <>
2021-02-25 09:52:48 +01:00

522 lines
18 KiB
INI
Raw Blame History

; PlatformIO Project Configuration File
; Please visit documentation: https://docs.platformio.org/page/projectconf.html
[platformio]
# ------------------------------------------------------------------------------
# ENVIRONMENTS
#
# Please uncomment one of the lines below to select your board(s)
# ------------------------------------------------------------------------------
# Travis CI binaries (comment this out with a ';' when building for your own board)
default_envs = travis_esp8266, travis_esp32
# Release binaries
; default_envs = nodemcuv2, esp01_1m_full, esp32dev
# Single binaries (uncomment your board)
; default_envs = nodemcuv2
; default_envs = esp01_1m_full
; default_envs = esp07
; default_envs = d1_mini
; default_envs = heltec_wifi_kit_8
; default_envs = h803wf
; default_envs = d1_mini_debug
; default_envs = d1_mini_ota
; default_envs = esp32dev
; default_envs = esp8285_4CH_MagicHome
; default_envs = esp8285_4CH_H801
; default_envs = esp8285_5CH_H801
; default_envs = d1_mini_5CH_Shojo_PCB
; default_envs = wemos_shield_esp32
; default_envs = m5atom
; default_envs = esp32_eth
src_dir = ./wled00
data_dir = ./wled00/data
build_cache_dir = ~/.buildcache
extra_configs =
platformio_override.ini
[common]
# ------------------------------------------------------------------------------
# PLATFORM:
# !! DO NOT confuse platformio's ESP8266 development platform with Arduino core for ESP8266
#
# arduino core 2.6.3 = platformIO 2.3.2
# arduino core 2.7.0 = platformIO 2.5.0
# ------------------------------------------------------------------------------
arduino_core_2_6_3 = espressif8266@2.3.3
arduino_core_2_7_4 = espressif8266@2.6.2
# Development platforms
arduino_core_develop = https://github.com/platformio/platform-espressif8266#develop
arduino_core_git = https://github.com/platformio/platform-espressif8266#feature/stage
# Platform to use for ESP8266
platform_wled_default = ${common.arduino_core_2_7_4}
# We use 2.7.4.7 for all, includes PWM flicker fix and Wstring optimization
platform_packages = tasmota/framework-arduinoespressif8266 @ 3.20704.7
platformio/toolchain-xtensa @ ~2.40802.200502
platformio/tool-esptool @ ~1.413.0
platformio/tool-esptoolpy @ ~1.30000.0
# ------------------------------------------------------------------------------
# FLAGS: DEBUG
#
# ------------------------------------------------------------------------------
debug_flags = -D DEBUG=1 -D WLED_DEBUG -DDEBUG_ESP_WIFI -DDEBUG_ESP_HTTP_CLIENT -DDEBUG_ESP_HTTP_UPDATE -DDEBUG_ESP_HTTP_SERVER -DDEBUG_ESP_UPDATER -DDEBUG_ESP_OTA -DDEBUG_TLS_MEM
#if needed (for memleaks etc) also add; -DDEBUG_ESP_OOM -include "umm_malloc/umm_malloc_cfg.h"
#-DDEBUG_ESP_CORE is not working right now
# ------------------------------------------------------------------------------
# FLAGS: ldscript (available ldscripts at https://github.com/esp8266/Arduino/tree/master/tools/sdk/ld)
# ldscript_512k ( 512 KB) = 487 KB sketch, 4 KB eeprom, no spiffs, 16 KB reserved
# ldscript_1m0m (1024 KB) = 999 KB sketch, 4 KB eeprom, no spiffs, 16 KB reserved
# ldscript_2m1m (2048 KB) = 1019 KB sketch, 4 KB eeprom, 1004 KB spiffs, 16 KB reserved
# ldscript_4m1m (4096 KB) = 1019 KB sketch, 4 KB eeprom, 1002 KB spiffs, 16 KB reserved, 2048 KB empty/ota?
# ldscript_4m3m (4096 KB) = 1019 KB sketch, 4 KB eeprom, 3040 KB spiffs, 16 KB reserved
#
# Available lwIP variants (macros):
# -DPIO_FRAMEWORK_ARDUINO_LWIP_HIGHER_BANDWIDTH = v1.4 Higher Bandwidth (default)
# -DPIO_FRAMEWORK_ARDUINO_LWIP2_LOW_MEMORY = v2 Lower Memory
# -DPIO_FRAMEWORK_ARDUINO_LWIP2_HIGHER_BANDWIDTH = v2 Higher Bandwidth
# -DPIO_FRAMEWORK_ARDUINO_LWIP2_HIGHER_BANDWIDTH_LOW_FLASH
#
# BearSSL performance:
# When building with -DSECURE_CLIENT=SECURE_CLIENT_BEARSSL, please add `board_build.f_cpu = 160000000` to the environment configuration
#
# BearSSL ciphers:
# When building on core >= 2.5, you can add the build flag -DBEARSSL_SSL_BASIC in order to build BearSSL with a limited set of ciphers:
# TLS_RSA_WITH_AES_128_CBC_SHA256 / AES128-SHA256
# TLS_RSA_WITH_AES_256_CBC_SHA256 / AES256-SHA256
# TLS_RSA_WITH_AES_128_CBC_SHA / AES128-SHA
# TLS_RSA_WITH_AES_256_CBC_SHA / AES256-SHA
# This reduces the OTA size with ~45KB, so it's especially useful on low memory boards (512k/1m).
# ------------------------------------------------------------------------------
build_flags =
-Wno-switch
-Wno-deprecated-declarations
-Wno-write-strings
-Wno-unused-variable
-Wno-unused-value
-Wno-sign-compare
-Wno-unused-but-set-variable
-Wno-return-type
-Wno-sequence-point
-Wno-narrowing
-DMQTT_MAX_PACKET_SIZE=1024
-DSECURE_CLIENT=SECURE_CLIENT_BEARSSL
-DBEARSSL_SSL_BASIC
-D CORE_DEBUG_LEVEL=0
-D NDEBUG
#build_flags for the IRremoteESP8266 library (enabled decoders have to appear here)
-D _IR_ENABLE_DEFAULT_=false
-D DECODE_HASH=true
-D DECODE_NEC=true
-D DECODE_SONY=true
-D DECODE_SAMSUNG=true
-D DECODE_LG=true
-DWLED_USE_MY_CONFIG
; -D USERMOD_SENSORSTOMQTT
build_unflags =
-Wall
-Wreorder
-Wdeprecated-declarations
# enables all features for travis CI
build_flags_all_features =
-D WLED_USE_ANALOG_LED
-D WLED_USE_H801
-D WLED_ENABLE_5CH_LEDS
-D WLED_ENABLE_ADALIGHT
-D WLED_ENABLE_DMX
-D WLED_ENABLE_MQTT
-D WLED_ENABLE_WEBSOCKETS
build_flags_esp8266 = ${common.build_flags} ${esp8266.build_flags}
build_flags_esp32 = ${common.build_flags} ${esp32.build_flags}
ldscript_1m128k = eagle.flash.1m128.ld
ldscript_2m512k = eagle.flash.2m512.ld
ldscript_2m1m = eagle.flash.2m1m.ld
ldscript_4m1m = eagle.flash.4m1m.ld
[esp8266]
build_flags =
-DESP8266
-DFP_IN_IROM
; NONOSDK22x_190703 = 2.2.2-dev(38a443e)
-DPIO_FRAMEWORK_ARDUINO_ESPRESSIF_SDK22x_190703
; lwIP 2 - Higher Bandwidth no Features
; -DPIO_FRAMEWORK_ARDUINO_LWIP2_HIGHER_BANDWIDTH_LOW_FLASH
; lwIP 1.4 - Higher Bandwidth (Aircoookie has)
-DPIO_FRAMEWORK_ARDUINO_LWIP_HIGHER_BANDWIDTH
; VTABLES in Flash
-DVTABLES_IN_FLASH
; restrict to minimal mime-types
-DMIMETYPE_MINIMAL
[esp32]
build_flags = -w -g
-DARDUINO_ARCH_ESP32
-DCONFIG_LITTLEFS_FOR_IDF_3_2
[scripts_defaults]
extra_scripts = pio-scripts/name-firmware.py
pio-scripts/gzip-firmware.py
pio-scripts/strip-floats.py
pio-scripts/user_config_copy.py
# ------------------------------------------------------------------------------
# COMMON SETTINGS:
# ------------------------------------------------------------------------------
[env]
framework = arduino
board_build.flash_mode = dout
monitor_speed = 115200
# slow upload speed (comment this out with a ';' when building for development use)
upload_speed = 115200
# fast upload speed (remove ';' when building for development use)
; upload_speed = 921600
# ------------------------------------------------------------------------------
# LIBRARIES: required dependencies
# Please note that we don't always use the latest version of a library.
#
# The following libraries have been included (and some of them changd) in the source:
# ArduinoJson@5.13.5, Blynk@0.5.4(changed), E131@1.0.0(changed), Time@1.5, Timezone@1.2.1
# ------------------------------------------------------------------------------
lib_compat_mode = strict
lib_deps =
fastled/FastLED @ 3.3.2
NeoPixelBus @ 2.6.0
ESPAsyncTCP @ 1.2.0
ESPAsyncUDP
AsyncTCP @ 1.0.3
IRremoteESP8266 @ 2.7.3
https://github.com/lorol/LITTLEFS.git
https://github.com/Aircoookie/ESPAsyncWebServer.git @ ~2.0.0
#For use of the TTGO T-Display ESP32 Module with integrated TFT display uncomment the following line
#TFT_eSPI
#For use SSD1306 OLED display uncomment following
#U8g2@~2.27.2
#For Dallas sensor uncomment following 2 lines
#OneWire@~2.3.5
#milesburton/DallasTemperature@^3.9.0
#For BME280 sensor uncomment following
#BME280@~3.0.0
; adafruit/Adafruit BMP280 Library @ 2.1.0
; adafruit/Adafruit CCS811 Library @ 1.0.4
; adafruit/Adafruit Si7021 Library @ 1.4.0
lib_ignore =
AsyncTCP
extra_scripts = ${scripts_defaults.extra_scripts}
# ------------------------------------------------------------------------------
# WLED BUILDS
# ------------------------------------------------------------------------------
[env:nodemcuv2]
board = nodemcuv2
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_4m1m}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266}
[env:esp01_1m_full]
board = esp01_1m
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_1m128k}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} -D WLED_DISABLE_OTA
[env:esp07]
board = esp07
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_4m1m}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266}
[env:d1_mini]
board = d1_mini
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
upload_speed = 921600
board_build.ldscript = ${common.ldscript_4m1m}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266}
monitor_filters = esp8266_exception_decoder
[env:heltec_wifi_kit_8]
board = d1_mini
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_4m1m}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266}
[env:h803wf]
board = d1_mini
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_4m1m}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} -D LEDPIN=1 -D WLED_DISABLE_INFRARED
[env:esp32dev]
board = esp32dev
platform = espressif32@2.0
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp32}
lib_ignore =
ESPAsyncTCP
ESPAsyncUDP
[env:esp32_eth]
board = esp32-poe
platform = espressif32@2.0
upload_speed = 921600
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp32} -D RLYPIN=-1 -D WLED_USE_ETHERNET -D BTNPIN=-1
lib_ignore =
ESPAsyncTCP
ESPAsyncUDP
[env:esp8285_4CH_MagicHome]
board = esp8285
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_1m128k}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} -D WLED_DISABLE_OTA -D WLED_USE_ANALOG_LEDS
[env:esp8285_4CH_H801]
board = esp8285
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_1m128k}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} -D WLED_DISABLE_OTA -D WLED_USE_ANALOG_LEDS -D WLED_USE_H801
[env:esp8285_5CH_H801]
board = esp8285
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_1m128k}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} -D WLED_DISABLE_OTA -D WLED_USE_ANALOG_LEDS -D WLED_USE_H801 -D WLED_ENABLE_5CH_LEDS
[env:d1_mini_5CH_Shojo_PCB]
board = d1_mini
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_4m1m}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} -D WLED_USE_ANALOG_LEDS -D WLED_USE_SHOJO_PCB -D WLED_ENABLE_5CH_LEDS
# ------------------------------------------------------------------------------
# DEVELOPMENT BOARDS
# ------------------------------------------------------------------------------
[env:d1_mini_debug]
board = d1_mini
build_type = debug
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_4m1m}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} ${common.debug_flags}
[env:d1_mini_ota]
board = d1_mini
upload_protocol = espota
# exchange for your WLED IP
upload_port = "10.10.1.27"
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_4m1m}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266}
[env:anavi_miracle_controller]
board = d1_mini
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_4m1m}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} -D LEDPIN=12 -D IRPIN=-1 -D RLYPIN=2
# ------------------------------------------------------------------------------
# custom board configurations
# ------------------------------------------------------------------------------
[env:custom_LEDPIN_4]
board = d1_mini
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_4m1m}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} -D LEDPIN=4 -D IRPIN=5
[env:custom_LEDPIN_16]
board = d1_mini
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_4m1m}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} -D LEDPIN=16
[env:custom_LEDPIN_3]
board = d1_mini
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_4m1m}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} -D LEDPIN=3
[env:custom_APA102]
board = d1_mini
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_4m1m}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} -D USE_APA102
[env:custom_WS2801]
board = d1_mini
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_4m1m}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} -D USE_WS2801
[env:custom32_LEDPIN_16]
board = esp32dev
platform = espressif32@2.0
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp32} -D LEDPIN=16 -D RLYPIN=19
lib_ignore =
ESPAsyncTCP
ESPAsyncUDP
[env:custom32_APA102]
board = esp32dev
platform = espressif32@2.0
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp32} -D USE_APA102
lib_ignore =
ESPAsyncTCP
ESPAsyncUDP
[env:custom32_TOUCHPIN_T0]
board = esp32dev
platform = espressif32@2.0
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp32} -D TOUCHPIN=T0
lib_ignore =
ESPAsyncTCP
ESPAsyncUDP
[env:wemos_shield_esp32]
board = esp32dev
platform = espressif32@2.0
upload_port = /dev/cu.SLAB_USBtoUART
monitor_port = /dev/cu.SLAB_USBtoUART
upload_speed = 460800
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp32} -D LEDPIN=16 -D RLYPIN=19 -D BTNPIN=17
lib_ignore =
ESPAsyncTCP
ESPAsyncUDP
[env:m5atom]
board = esp32dev
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp32} -D LEDPIN=27 -D BTNPIN=39
lib_ignore =
ESPAsyncTCP
ESPAsyncUDP
platform = espressif32@2.0
[env:sp501e]
board = esp_wroom_02
platform = ${common.platform_wled_default}
board_build.ldscript = ${common.ldscript_2m512k}
build_flags = ${common.build_flags_esp8266} -D LEDPIN=3 -D BTNPIN=1
# ------------------------------------------------------------------------------
# travis test board configurations
# ------------------------------------------------------------------------------
[env:travis_esp8266]
extends = env:d1_mini
build_type = debug
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} ${common.debug_flags} ${common.build_flags_all_features}
[env:travis_esp32]
extends = env:esp32dev
; build_type = debug
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp32} ${common.debug_flags} ${common.build_flags_all_features}
# ------------------------------------------------------------------------------
# codm pixel controller board configurations
# ------------------------------------------------------------------------------
[env:codm-controller-0.4]
board = esp_wroom_02
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_2m512k}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} -D LEDPIN=3
[env:codm-controller-0.4-WS2801]
board = esp_wroom_02
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_2m512k}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} -D USE_WS2801 -D CLKPIN=13 -D DATAPIN=3
[env:codm-controller-0.4-APA102]
board = esp_wroom_02
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_2m512k}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} -D USE_APA102 -D CLKPIN=13 -D DATAPIN=3
[env:codm-controller-0.5]
board = esp_wroom_02
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_2m512k}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266}
[env:codm-controller-0.5-WS2801]
board = esp_wroom_02
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_2m512k}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} -D USE_WS2801 #-D CLKPIN=0 -D DATAPIN=2
[env:codm-controller-0.5-APA102]
board = esp_wroom_02
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_2m512k}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} -D USE_APA102 #-D CLKPIN=0 -D DATAPIN=2
Reference in New Issue View Git Blame Copy Permalink