567 lines
19 KiB
C++
567 lines
19 KiB
C++
/*
|
|
* Main sketch, global variable declarations
|
|
*/
|
|
/*
|
|
* @title WLED project sketch
|
|
* @version 0.9.0-b2
|
|
* @author Christian Schwinne
|
|
*/
|
|
|
|
|
|
//ESP8266-01 (blue) got too little storage space to work with all features of WLED. To use it, you must use ESP8266 Arduino Core v2.4.2 and the setting 512K(No SPIFFS).
|
|
|
|
//ESP8266-01 (black) has 1MB flash and can thus fit the whole program. Use 1M(64K SPIFFS).
|
|
//Uncomment some of the following lines to disable features to compile for ESP8266-01 (max flash size 434kB):
|
|
|
|
//You are required to disable over-the-air updates:
|
|
//#define WLED_DISABLE_OTA //saves 14kb
|
|
|
|
//You need to choose some of these features to disable:
|
|
//#define WLED_DISABLE_ALEXA //saves 11kb
|
|
//#define WLED_DISABLE_BLYNK //saves 6kb
|
|
//#define WLED_DISABLE_CRONIXIE //saves 3kb
|
|
//#define WLED_DISABLE_HUESYNC //saves 4kb
|
|
//#define WLED_DISABLE_INFRARED //there is no pin left for this on ESP8266-01, saves 25kb (!)
|
|
#define WLED_ENABLE_MQTT //saves 12kb
|
|
#define WLED_ENABLE_ADALIGHT //saves 500b only
|
|
|
|
#define WLED_DISABLE_FILESYSTEM //SPIFFS is not used by any WLED feature yet
|
|
//#define WLED_ENABLE_FS_SERVING //Enable sending html file from SPIFFS before serving progmem version
|
|
//#define WLED_ENABLE_FS_EDITOR //enable /edit page for editing SPIFFS content. Will also be disabled with OTA lock
|
|
|
|
//to toggle usb serial debug (un)comment the following line
|
|
//#define WLED_DEBUG
|
|
|
|
//library inclusions
|
|
#include <Arduino.h>
|
|
#ifdef ESP8266
|
|
#include <ESP8266WiFi.h>
|
|
#include <ESP8266mDNS.h>
|
|
#include <ESPAsyncTCP.h>
|
|
#else
|
|
#include <WiFi.h>
|
|
#include "esp_wifi.h"
|
|
#include <ESPmDNS.h>
|
|
#include <AsyncTCP.h>
|
|
#include "SPIFFS.h"
|
|
#endif
|
|
|
|
#include <ESPAsyncWebServer.h>
|
|
#include <EEPROM.h>
|
|
#include <WiFiUdp.h>
|
|
#include <DNSServer.h>
|
|
#ifndef WLED_DISABLE_OTA
|
|
#include <ArduinoOTA.h>
|
|
#endif
|
|
#include <SPIFFSEditor.h>
|
|
#include "src/dependencies/time/TimeLib.h"
|
|
#include "src/dependencies/timezone/Timezone.h"
|
|
#ifndef WLED_DISABLE_ALEXA
|
|
#define ESPALEXA_ASYNC
|
|
#define ESPALEXA_NO_SUBPAGE
|
|
#define ESPALEXA_MAXDEVICES 1
|
|
//#define ESPALEXA_DEBUG
|
|
#include "src/dependencies/espalexa/Espalexa.h"
|
|
#endif
|
|
#ifndef WLED_DISABLE_BLYNK
|
|
#include "src/dependencies/blynk/BlynkSimpleEsp.h"
|
|
#endif
|
|
#include "src/dependencies/e131/ESPAsyncE131.h"
|
|
#include "src/dependencies/async-mqtt-client/AsyncMqttClient.h"
|
|
#include "src/dependencies/json/AsyncJson-v6.h"
|
|
#include "src/dependencies/json/ArduinoJson-v6.h"
|
|
#include "html_ui.h"
|
|
#include "html_settings.h"
|
|
#include "html_other.h"
|
|
#include "FX.h"
|
|
#include "ir_codes.h"
|
|
|
|
|
|
#if IR_PIN < 0
|
|
#ifndef WLED_DISABLE_INFRARED
|
|
#define WLED_DISABLE_INFRARED
|
|
#endif
|
|
#endif
|
|
|
|
#ifndef WLED_DISABLE_INFRARED
|
|
#include <IRremoteESP8266.h>
|
|
#include <IRrecv.h>
|
|
#include <IRutils.h>
|
|
#endif
|
|
|
|
//version code in format yymmddb (b = daily build)
|
|
#define VERSION 2001281
|
|
|
|
char versionString[] = "0.9.0-b2";
|
|
|
|
|
|
//AP and OTA default passwords (for maximum change them!)
|
|
char apPass[65] = "wled1234";
|
|
char otaPass[33] = "wledota";
|
|
|
|
|
|
//Hardware CONFIG (only changeble HERE, not at runtime)
|
|
//LED strip pin, button pin and IR pin changeable in NpbWrapper.h!
|
|
|
|
byte auxDefaultState = 0; //0: input 1: high 2: low
|
|
byte auxTriggeredState = 0; //0: input 1: high 2: low
|
|
char ntpServerName[33] = "0.wled.pool.ntp.org";//NTP server to use
|
|
|
|
|
|
//WiFi CONFIG (all these can be changed via web UI, no need to set them here)
|
|
char clientSSID[33] = "Your_Network";
|
|
char clientPass[65] = "";
|
|
char cmDNS[33] = "x"; //mDNS address (placeholder, will be replaced by wledXXXXXXXXXXXX.local)
|
|
char apSSID[33] = ""; //AP off by default (unless setup)
|
|
byte apChannel = 1; //2.4GHz WiFi AP channel (1-13)
|
|
byte apHide = 0; //hidden AP SSID
|
|
//byte apWaitTimeSecs = 32; //time to wait for connection before opening AP
|
|
byte apBehavior = 0; //0: Open AP when no connection after boot 1: Open when no connection 2: Always open 3: Only when button pressed for 6 sec
|
|
//bool recoveryAPDisabled = false; //never open AP (not recommended)
|
|
IPAddress staticIP(0, 0, 0, 0); //static IP of ESP
|
|
IPAddress staticGateway(0, 0, 0, 0); //gateway (router) IP
|
|
IPAddress staticSubnet(255, 255, 255, 0); //most common subnet in home networks
|
|
|
|
//LED CONFIG
|
|
uint16_t ledCount = 30; //overcurrent prevented by ABL
|
|
bool useRGBW = false; //SK6812 strips can contain an extra White channel
|
|
bool autoRGBtoRGBW = false; //if RGBW enabled, calculate White channel from RGB
|
|
#define ABL_MILLIAMPS_DEFAULT 850; //auto lower brightness to stay close to milliampere limit
|
|
bool turnOnAtBoot = true; //turn on LEDs at power-up
|
|
byte bootPreset = 0; //save preset to load after power-up
|
|
|
|
byte col[]{255, 160, 0, 0}; //default RGB(W) color
|
|
byte colSec[]{0, 0, 0, 0}; //default RGB(W) secondary color
|
|
byte briS = 128; //default brightness
|
|
|
|
byte nightlightTargetBri = 0; //brightness after nightlight is over
|
|
byte nightlightDelayMins = 60;
|
|
bool nightlightFade = true; //if enabled, light will gradually dim towards the target bri. Otherwise, it will instantly set after delay over
|
|
bool nightlightColorFade = false; //if enabled, light will gradually fade color from primary to secondary color.
|
|
bool fadeTransition = true; //enable crossfading color transition
|
|
bool enableSecTransition = true; //also enable transition for secondary color
|
|
uint16_t transitionDelay = 750; //default crossfade duration in ms
|
|
|
|
bool skipFirstLed = false; //ignore first LED in strip (useful if you need the LED as signal repeater)
|
|
byte briMultiplier = 100; //% of brightness to set (to limit power, if you set it to 50 and set bri to 255, actual brightness will be 127)
|
|
|
|
|
|
//User Interface CONFIG
|
|
char serverDescription[33] = "WLED"; //Name of module
|
|
bool syncToggleReceive = false; //UIs which only have a single button for sync should toggle send+receive if this is true, only send otherwise
|
|
|
|
|
|
//Sync CONFIG
|
|
bool buttonEnabled = true;
|
|
byte irEnabled = 0; //Infrared receiver
|
|
|
|
uint16_t udpPort = 21324; //WLED notifier default port
|
|
uint16_t udpRgbPort = 19446; //Hyperion port
|
|
|
|
bool receiveNotificationBrightness = true; //apply brightness from incoming notifications
|
|
bool receiveNotificationColor = true; //apply color
|
|
bool receiveNotificationEffects = true; //apply effects setup
|
|
bool notifyDirect = false; //send notification if change via UI or HTTP API
|
|
bool notifyButton = false; //send if updated by button or infrared remote
|
|
bool notifyAlexa = false; //send notification if updated via Alexa
|
|
bool notifyMacro = false; //send notification for macro
|
|
bool notifyHue = true; //send notification if Hue light changes
|
|
bool notifyTwice = false; //notifications use UDP: enable if devices don't sync reliably
|
|
|
|
bool alexaEnabled = true; //enable device discovery by Amazon Echo
|
|
char alexaInvocationName[33] = "Light"; //speech control name of device. Choose something voice-to-text can understand
|
|
|
|
char blynkApiKey[36] = ""; //Auth token for Blynk server. If empty, no connection will be made
|
|
|
|
uint16_t realtimeTimeoutMs = 2500; //ms timeout of realtime mode before returning to normal mode
|
|
int arlsOffset = 0; //realtime LED offset
|
|
bool receiveDirect = true; //receive UDP realtime
|
|
bool arlsDisableGammaCorrection = true; //activate if gamma correction is handled by the source
|
|
bool arlsForceMaxBri = false; //enable to force max brightness if source has very dark colors that would be black
|
|
|
|
uint16_t e131Universe = 1; //settings for E1.31 (sACN) protocol
|
|
bool e131Multicast = false;
|
|
|
|
bool mqttEnabled = false;
|
|
char mqttDeviceTopic[33] = ""; //main MQTT topic (individual per device, default is wled/mac)
|
|
char mqttGroupTopic[33] = "wled/all"; //second MQTT topic (for example to group devices)
|
|
char mqttServer[33] = ""; //both domains and IPs should work (no SSL)
|
|
char mqttUser[41] = ""; //optional: username for MQTT auth
|
|
char mqttPass[41] = ""; //optional: password for MQTT auth
|
|
char mqttClientID[41] = ""; //override the client ID
|
|
uint16_t mqttPort = 1883;
|
|
|
|
bool huePollingEnabled = false; //poll hue bridge for light state
|
|
uint16_t huePollIntervalMs = 2500; //low values (< 1sec) may cause lag but offer quicker response
|
|
char hueApiKey[47] = "api"; //key token will be obtained from bridge
|
|
byte huePollLightId = 1; //ID of hue lamp to sync to. Find the ID in the hue app ("about" section)
|
|
IPAddress hueIP = (0,0,0,0); //IP address of the bridge
|
|
bool hueApplyOnOff = true;
|
|
bool hueApplyBri = true;
|
|
bool hueApplyColor = true;
|
|
|
|
|
|
//Time CONFIG
|
|
bool ntpEnabled = false; //get internet time. Only required if you use clock overlays or time-activated macros
|
|
bool useAMPM = false; //12h/24h clock format
|
|
byte currentTimezone = 0; //Timezone ID. Refer to timezones array in wled10_ntp.ino
|
|
int utcOffsetSecs = 0; //Seconds to offset from UTC before timzone calculation
|
|
|
|
byte overlayDefault = 0; //0: no overlay 1: analog clock 2: single-digit clocl 3: cronixie
|
|
byte overlayMin = 0, overlayMax = ledCount-1; //boundaries of overlay mode
|
|
|
|
byte analogClock12pixel = 0; //The pixel in your strip where "midnight" would be
|
|
bool analogClockSecondsTrail = false; //Display seconds as trail of LEDs instead of a single pixel
|
|
bool analogClock5MinuteMarks = false; //Light pixels at every 5-minute position
|
|
|
|
char cronixieDisplay[7] = "HHMMSS"; //Cronixie Display mask. See wled13_cronixie.ino
|
|
bool cronixieBacklight = true; //Allow digits to be back-illuminated
|
|
|
|
bool countdownMode = false; //Clock will count down towards date
|
|
byte countdownYear = 20, countdownMonth = 1; //Countdown target date, year is last two digits
|
|
byte countdownDay = 1, countdownHour = 0;
|
|
byte countdownMin = 0, countdownSec = 0;
|
|
|
|
|
|
byte macroBoot = 0; //macro loaded after startup
|
|
byte macroNl = 0; //after nightlight delay over
|
|
byte macroCountdown = 0;
|
|
byte macroAlexaOn = 0, macroAlexaOff = 0;
|
|
byte macroButton = 0, macroLongPress = 0, macroDoublePress = 0;
|
|
|
|
|
|
//Security CONFIG
|
|
bool otaLock = false; //prevents OTA firmware updates without password. ALWAYS enable if system exposed to any public networks
|
|
bool wifiLock = false; //prevents access to WiFi settings when OTA lock is enabled
|
|
bool aOtaEnabled = true; //ArduinoOTA allows easy updates directly from the IDE. Careful, it does not auto-disable when OTA lock is on
|
|
|
|
|
|
uint16_t userVar0 = 0, userVar1 = 0;
|
|
|
|
|
|
//internal global variable declarations
|
|
//wifi
|
|
bool apActive = false;
|
|
bool forceReconnect = false;
|
|
uint32_t lastReconnectAttempt = 0;
|
|
bool interfacesInited = false;
|
|
bool wasConnected = false;
|
|
|
|
//color
|
|
byte colOld[]{0, 0, 0, 0}; //color before transition
|
|
byte colT[]{0, 0, 0, 0}; //current color
|
|
byte colIT[]{0, 0, 0, 0}; //color that was last sent to LEDs
|
|
byte colSecT[]{0, 0, 0, 0};
|
|
byte colSecOld[]{0, 0, 0, 0};
|
|
byte colSecIT[]{0, 0, 0, 0};
|
|
|
|
byte lastRandomIndex = 0; //used to save last random color so the new one is not the same
|
|
|
|
//transitions
|
|
bool transitionActive = false;
|
|
uint16_t transitionDelayDefault = transitionDelay;
|
|
uint16_t transitionDelayTemp = transitionDelay;
|
|
unsigned long transitionStartTime;
|
|
float tperLast = 0; //crossfade transition progress, 0.0f - 1.0f
|
|
bool jsonTransitionOnce = false;
|
|
|
|
//nightlight
|
|
bool nightlightActive = false;
|
|
bool nightlightActiveOld = false;
|
|
uint32_t nightlightDelayMs = 10;
|
|
uint8_t nightlightDelayMinsDefault = nightlightDelayMins;
|
|
unsigned long nightlightStartTime;
|
|
byte briNlT = 0; //current nightlight brightness
|
|
byte colNlT[]{0, 0, 0, 0}; //current nightlight color
|
|
|
|
//brightness
|
|
unsigned long lastOnTime = 0;
|
|
bool offMode = !turnOnAtBoot;
|
|
byte bri = briS;
|
|
byte briOld = 0;
|
|
byte briT = 0;
|
|
byte briIT = 0;
|
|
byte briLast = 128; //brightness before turned off. Used for toggle function
|
|
byte whiteLast = 128; //white channel before turned off. Used for toggle function
|
|
|
|
//button
|
|
bool buttonPressedBefore = false;
|
|
bool buttonLongPressed = false;
|
|
unsigned long buttonPressedTime = 0;
|
|
unsigned long buttonWaitTime = 0;
|
|
|
|
//notifications
|
|
bool notifyDirectDefault = notifyDirect;
|
|
bool receiveNotifications = true;
|
|
unsigned long notificationSentTime = 0;
|
|
byte notificationSentCallMode = 0;
|
|
bool notificationTwoRequired = false;
|
|
|
|
//effects
|
|
byte effectCurrent = 0;
|
|
byte effectSpeed = 128;
|
|
byte effectIntensity = 128;
|
|
byte effectPalette = 0;
|
|
|
|
//network
|
|
bool udpConnected = false, udpRgbConnected = false;
|
|
|
|
//ui style
|
|
bool showWelcomePage = false;
|
|
|
|
//hue
|
|
char hueError[25] = "Inactive";
|
|
//uint16_t hueFailCount = 0;
|
|
float hueXLast=0, hueYLast=0;
|
|
uint16_t hueHueLast=0, hueCtLast=0;
|
|
byte hueSatLast=0, hueBriLast=0;
|
|
unsigned long hueLastRequestSent = 0;
|
|
bool hueAuthRequired = false;
|
|
bool hueReceived = false;
|
|
bool hueStoreAllowed = false, hueNewKey = false;
|
|
|
|
//overlays
|
|
byte overlayCurrent = overlayDefault;
|
|
byte overlaySpeed = 200;
|
|
unsigned long overlayRefreshMs = 200;
|
|
unsigned long overlayRefreshedTime;
|
|
|
|
//cronixie
|
|
byte dP[]{0,0,0,0,0,0};
|
|
bool cronixieInit = false;
|
|
|
|
//countdown
|
|
unsigned long countdownTime = 1514764800L;
|
|
bool countdownOverTriggered = true;
|
|
|
|
//timer
|
|
byte lastTimerMinute = 0;
|
|
byte timerHours[] = {0,0,0,0,0,0,0,0};
|
|
byte timerMinutes[] = {0,0,0,0,0,0,0,0};
|
|
byte timerMacro[] = {0,0,0,0,0,0,0,0};
|
|
byte timerWeekday[] = {255,255,255,255,255,255,255,255}; //weekdays to activate on
|
|
//bit pattern of arr elem: 0b11111111: sun,sat,fri,thu,wed,tue,mon,validity
|
|
|
|
//blynk
|
|
bool blynkEnabled = false;
|
|
|
|
//preset cycling
|
|
bool presetCyclingEnabled = false;
|
|
byte presetCycleMin = 1, presetCycleMax = 5;
|
|
uint16_t presetCycleTime = 1250;
|
|
unsigned long presetCycledTime = 0; byte presetCycCurr = presetCycleMin;
|
|
bool presetApplyBri = false, presetApplyCol = true, presetApplyFx = true;
|
|
bool saveCurrPresetCycConf = false;
|
|
|
|
//realtime
|
|
bool realtimeActive = false;
|
|
IPAddress realtimeIP = (0,0,0,0);
|
|
unsigned long realtimeTimeout = 0;
|
|
|
|
//mqtt
|
|
long lastMqttReconnectAttempt = 0;
|
|
long lastInterfaceUpdate = 0;
|
|
byte interfaceUpdateCallMode = 0;
|
|
char mqttStatusTopic[40] = ""; //this must be global because of async handlers
|
|
|
|
#if AUXPIN >= 0
|
|
//auxiliary debug pin
|
|
byte auxTime = 0;
|
|
unsigned long auxStartTime = 0;
|
|
bool auxActive = false, auxActiveBefore = false;
|
|
#endif
|
|
|
|
//alexa udp
|
|
String escapedMac;
|
|
#ifndef WLED_DISABLE_ALEXA
|
|
Espalexa espalexa;
|
|
EspalexaDevice* espalexaDevice;
|
|
#endif
|
|
|
|
//dns server
|
|
DNSServer dnsServer;
|
|
|
|
//network time
|
|
bool ntpConnected = false;
|
|
time_t local = 0;
|
|
unsigned long ntpLastSyncTime = 999000000L;
|
|
unsigned long ntpPacketSentTime = 999000000L;
|
|
IPAddress ntpServerIP;
|
|
uint16_t ntpLocalPort = 2390;
|
|
#define NTP_PACKET_SIZE 48
|
|
|
|
#define MAX_LEDS 1500
|
|
#define MAX_LEDS_DMA 500
|
|
|
|
//string temp buffer (now stored in stack locally)
|
|
#define OMAX 2048
|
|
char* obuf;
|
|
uint16_t olen = 0;
|
|
|
|
uint16_t savedPresets = 0;
|
|
int8_t currentPreset = -1;
|
|
bool isPreset = false;
|
|
|
|
byte errorFlag = 0;
|
|
|
|
String messageHead, messageSub;
|
|
byte optionType;
|
|
|
|
bool doReboot = false; //flag to initiate reboot from async handlers
|
|
bool doPublishMqtt = false;
|
|
|
|
//server library objects
|
|
AsyncWebServer server(80);
|
|
AsyncClient* hueClient = NULL;
|
|
AsyncMqttClient* mqtt = NULL;
|
|
|
|
//function prototypes
|
|
void colorFromUint32(uint32_t,bool=false);
|
|
void serveMessage(AsyncWebServerRequest*,uint16_t,String,String,byte);
|
|
void handleE131Packet(e131_packet_t*, IPAddress);
|
|
void handleOverlayDraw();
|
|
|
|
#define E131_MAX_UNIVERSE_COUNT 9
|
|
|
|
//udp interface objects
|
|
WiFiUDP notifierUdp, rgbUdp;
|
|
WiFiUDP ntpUdp;
|
|
ESPAsyncE131 e131(handleE131Packet);
|
|
bool e131NewData = false;
|
|
|
|
//led fx library object
|
|
WS2812FX strip = WS2812FX();
|
|
|
|
#define WLED_CONNECTED (WiFi.status() == WL_CONNECTED)
|
|
#define WLED_WIFI_CONFIGURED (strlen(clientSSID) >= 1 && strcmp(clientSSID,"Your_Network") != 0)
|
|
|
|
//debug macros
|
|
#ifdef WLED_DEBUG
|
|
#define DEBUG_PRINT(x) Serial.print (x)
|
|
#define DEBUG_PRINTLN(x) Serial.println (x)
|
|
#define DEBUG_PRINTF(x) Serial.printf (x)
|
|
unsigned long debugTime = 0;
|
|
int lastWifiState = 3;
|
|
unsigned long wifiStateChangedTime = 0;
|
|
int loops = 0;
|
|
#else
|
|
#define DEBUG_PRINT(x)
|
|
#define DEBUG_PRINTLN(x)
|
|
#define DEBUG_PRINTF(x)
|
|
#endif
|
|
|
|
//filesystem
|
|
#ifndef WLED_DISABLE_FILESYSTEM
|
|
#include <FS.h>
|
|
#ifdef ARDUINO_ARCH_ESP32
|
|
#include "SPIFFS.h"
|
|
#endif
|
|
#include "SPIFFSEditor.h"
|
|
#endif
|
|
|
|
//turns all LEDs off and restarts ESP
|
|
void reset()
|
|
{
|
|
briT = 0;
|
|
long dly = millis();
|
|
while(millis() - dly < 250)
|
|
{
|
|
yield(); //enough time to send response to client
|
|
}
|
|
setAllLeds();
|
|
DEBUG_PRINTLN("MODULE RESET");
|
|
ESP.restart();
|
|
}
|
|
|
|
|
|
//append new c string to temp buffer efficiently
|
|
bool oappend(const char* txt)
|
|
{
|
|
uint16_t len = strlen(txt);
|
|
if (olen + len >= OMAX) return false; //buffer full
|
|
strcpy(obuf + olen, txt);
|
|
olen += len;
|
|
return true;
|
|
}
|
|
|
|
|
|
//append new number to temp buffer efficiently
|
|
bool oappendi(int i)
|
|
{
|
|
char s[11];
|
|
sprintf(s,"%ld", i);
|
|
return oappend(s);
|
|
}
|
|
|
|
|
|
//boot starts here
|
|
void setup() {
|
|
wledInit();
|
|
}
|
|
|
|
|
|
//main program loop
|
|
void loop() {
|
|
handleIR(); //2nd call to function needed for ESP32 to return valid results -- should be good for ESP8266, too
|
|
handleConnection();
|
|
handleSerial();
|
|
handleNotifications();
|
|
handleTransitions();
|
|
userLoop();
|
|
|
|
yield();
|
|
handleIO();
|
|
handleIR();
|
|
handleNetworkTime();
|
|
handleAlexa();
|
|
|
|
handleOverlays();
|
|
yield();
|
|
if (doReboot) reset();
|
|
|
|
if (!realtimeActive) //block stuff if WARLS/Adalight is enabled
|
|
{
|
|
if (apActive) dnsServer.processNextRequest();
|
|
#ifndef WLED_DISABLE_OTA
|
|
if (WLED_CONNECTED && aOtaEnabled) ArduinoOTA.handle();
|
|
#endif
|
|
handleNightlight();
|
|
yield();
|
|
|
|
handleHue();
|
|
handleBlynk();
|
|
|
|
yield();
|
|
if (!offMode) strip.service();
|
|
}
|
|
yield();
|
|
#ifdef ESP8266
|
|
MDNS.update();
|
|
#endif
|
|
if (millis() - lastMqttReconnectAttempt > 30000) initMqtt();
|
|
|
|
//DEBUG serial logging
|
|
#ifdef WLED_DEBUG
|
|
if (millis() - debugTime > 9999)
|
|
{
|
|
DEBUG_PRINTLN("---DEBUG INFO---");
|
|
DEBUG_PRINT("Runtime: "); DEBUG_PRINTLN(millis());
|
|
DEBUG_PRINT("Unix time: "); DEBUG_PRINTLN(now());
|
|
DEBUG_PRINT("Free heap: "); DEBUG_PRINTLN(ESP.getFreeHeap());
|
|
DEBUG_PRINT("Wifi state: "); DEBUG_PRINTLN(WiFi.status());
|
|
if (WiFi.status() != lastWifiState)
|
|
{
|
|
wifiStateChangedTime = millis();
|
|
}
|
|
lastWifiState = WiFi.status();
|
|
DEBUG_PRINT("State time: "); DEBUG_PRINTLN(wifiStateChangedTime);
|
|
DEBUG_PRINT("NTP last sync: "); DEBUG_PRINTLN(ntpLastSyncTime);
|
|
DEBUG_PRINT("Client IP: "); DEBUG_PRINTLN(WiFi.localIP());
|
|
DEBUG_PRINT("Loops/sec: "); DEBUG_PRINTLN(loops/10);
|
|
loops = 0;
|
|
debugTime = millis();
|
|
}
|
|
loops++;
|
|
#endif
|
|
}
|