WLED/wled00/wled05_init.ino
2019-10-18 12:19:52 +02:00

256 lines
6.0 KiB
C++

/*
* Setup code
*/
void wledInit()
{
EEPROM.begin(EEPSIZE);
ledCount = EEPROM.read(229) + ((EEPROM.read(398) << 8) & 0xFF00);
if (ledCount > 1200 || ledCount == 0) ledCount = 30;
#ifndef ARDUINO_ARCH_ESP32
#if LEDPIN == 3
if (ledCount > 300) ledCount = 300; //DMA method uses too much ram
#endif
#endif
Serial.begin(115200);
Serial.setTimeout(50);
DEBUG_PRINTLN();
DEBUG_PRINT("---WLED "); DEBUG_PRINT(versionString); DEBUG_PRINT(" "); DEBUG_PRINT(VERSION); DEBUG_PRINTLN(" INIT---");
#ifdef ARDUINO_ARCH_ESP32
DEBUG_PRINT("esp32 "); DEBUG_PRINTLN(ESP.getSdkVersion());
#else
DEBUG_PRINT("esp8266 "); DEBUG_PRINTLN(ESP.getCoreVersion());
#endif
int heapPreAlloc = ESP.getFreeHeap();
DEBUG_PRINT("heap ");
DEBUG_PRINTLN(ESP.getFreeHeap());
strip.init(EEPROM.read(372),ledCount,EEPROM.read(2204)); //init LEDs quickly
DEBUG_PRINT("LEDs inited. heap usage ~");
DEBUG_PRINTLN(heapPreAlloc - ESP.getFreeHeap());
#ifndef WLED_DISABLE_FILESYSTEM
#ifdef ARDUINO_ARCH_ESP32
SPIFFS.begin(true);
#endif
SPIFFS.begin();
#endif
DEBUG_PRINTLN("Load EEPROM");
loadSettingsFromEEPROM(true);
beginStrip();
DEBUG_PRINT("CSSID: ");
DEBUG_PRINT(clientSSID);
userBeginPreConnection();
if (strcmp(clientSSID,"Your_Network") == 0) showWelcomePage = true;
WiFi.persistent(false);
initCon();
DEBUG_PRINTLN("");
DEBUG_PRINT("Connected! IP address: ");
DEBUG_PRINTLN(WiFi.localIP());
if (hueIP[0] == 0)
{
hueIP[0] = WiFi.localIP()[0];
hueIP[1] = WiFi.localIP()[1];
hueIP[2] = WiFi.localIP()[2];
}
if (udpPort > 0 && udpPort != ntpLocalPort)
{
udpConnected = notifierUdp.begin(udpPort);
if (udpConnected && udpRgbPort != udpPort) udpRgbConnected = rgbUdp.begin(udpRgbPort);
}
if (ntpEnabled && WiFi.status() == WL_CONNECTED)
ntpConnected = ntpUdp.begin(ntpLocalPort);
//start captive portal if AP active
if (onlyAP || strlen(apSSID) > 0)
{
dnsServer.setErrorReplyCode(DNSReplyCode::NoError);
dnsServer.start(53, "*", WiFi.softAPIP());
dnsActive = true;
}
prepareIds(); //UUID from MAC (for Alexa and MQTT)
if (strcmp(cmDNS,"x") == 0) //fill in unique mdns default
{
strcpy(cmDNS, "wled-");
sprintf(cmDNS+5, "%*s", 6, escapedMac.c_str()+6);
}
if (mqttDeviceTopic[0] == 0)
{
strcpy(mqttDeviceTopic, "wled/");
sprintf(mqttDeviceTopic+5, "%*s", 6, escapedMac.c_str()+6);
}
if (mqttClientID[0] == 0)
{
strcpy(mqttClientID, "WLED-");
sprintf(mqttClientID+5, "%*s", 6, escapedMac.c_str()+6);
}
strip.service();
//HTTP server page init
initServer();
strip.service();
//init Alexa hue emulation
if (alexaEnabled && !onlyAP) alexaInit();
server.begin();
DEBUG_PRINTLN("HTTP server started");
//init ArduinoOTA
if (!onlyAP) {
#ifndef WLED_DISABLE_OTA
if (aOtaEnabled)
{
ArduinoOTA.onStart([]() {
#ifndef ARDUINO_ARCH_ESP32
wifi_set_sleep_type(NONE_SLEEP_T);
#endif
DEBUG_PRINTLN("Start ArduinoOTA");
});
if (strlen(cmDNS) > 0) ArduinoOTA.setHostname(cmDNS);
ArduinoOTA.begin();
}
#endif
strip.service();
// Set up mDNS responder:
if (strlen(cmDNS) > 0 && !onlyAP)
{
MDNS.begin(cmDNS);
DEBUG_PRINTLN("mDNS responder started");
// Add service to MDNS
MDNS.addService("http", "tcp", 80);
MDNS.addService("wled", "tcp", 80);
}
strip.service();
initBlynk(blynkApiKey);
initE131();
reconnectHue();
} else {
e131Enabled = false;
}
userBegin();
if (macroBoot>0) applyMacro(macroBoot);
Serial.println("Ada");
}
void beginStrip()
{
// Initialize NeoPixel Strip and button
#ifdef BTNPIN
pinMode(BTNPIN, INPUT_PULLUP);
#endif
if (bootPreset>0) applyPreset(bootPreset, turnOnAtBoot, true, true);
colorUpdated(0);
//init relay pin
#if RLYPIN >= 0
pinMode(RLYPIN, OUTPUT);
#if RLYMDE
digitalWrite(RLYPIN, bri);
#else
digitalWrite(RLYPIN, !bri);
#endif
#endif
//disable button if it is "pressed" unintentionally
#ifdef BTNPIN
if(digitalRead(BTNPIN) == LOW) buttonEnabled = false;
#else
buttonEnabled = false;
#endif
}
void initAP(bool resetAP=false){
bool set = apSSID[0];
if (!set || resetAP) strcpy(apSSID, "WLED-AP");
//if (resetAP) strcpy(apPass,"wled1234");
WiFi.softAPConfig(IPAddress(4, 3, 2, 1), IPAddress(4, 3, 2, 1), IPAddress(255,255,255,0));
WiFi.softAP(apSSID, apPass, apChannel, apHide);
if (!set) apSSID[0] = 0;
}
void initCon()
{
WiFi.disconnect(); //close old connections
if (staticIP[0] != 0)
{
WiFi.config(staticIP, staticGateway, staticSubnet, IPAddress(8,8,8,8));
} else
{
WiFi.config(0U, 0U, 0U);
}
if (strlen(apSSID)>0)
{
DEBUG_PRINT(" USING AP");
DEBUG_PRINTLN(strlen(apSSID));
initAP();
} else
{
DEBUG_PRINTLN(" NO AP");
WiFi.softAPdisconnect(true);
}
int fail_count = 0;
if (strlen(clientSSID) <1 || strcmp(clientSSID,"Your_Network") == 0)
fail_count = apWaitTimeSecs*2; //instantly go to ap mode
#ifndef ARDUINO_ARCH_ESP32
WiFi.hostname(serverDescription);
#endif
WiFi.begin(clientSSID, clientPass);
#ifdef ARDUINO_ARCH_ESP32
WiFi.setHostname(serverDescription);
#endif
unsigned long lastTry = 0;
bool con = false;
while(!con)
{
yield();
handleTransitions();
handleButton();
handleOverlays();
if (briT) strip.service();
if (millis()-lastTry > 499) {
con = (WiFi.status() == WL_CONNECTED);
lastTry = millis();
DEBUG_PRINTLN("C_NC");
if (!recoveryAPDisabled && fail_count > apWaitTimeSecs*2)
{
WiFi.disconnect();
DEBUG_PRINTLN("Can't connect. Opening AP...");
onlyAP = true;
initAP();
return;
}
fail_count++;
}
}
}
bool checkClientIsMobile(String useragent)
{
//to save complexity this function is not comprehensive
if (useragent.indexOf("Android") >= 0) return true;
if (useragent.indexOf("iPhone") >= 0) return true;
if (useragent.indexOf("iPod") >= 0) return true;
if (useragent.indexOf("iPad") >= 0) return true;
return false;
}