1082 lines
39 KiB
C++
1082 lines
39 KiB
C++
#include "wled.h"
|
|
|
|
/*
|
|
* Receives client input
|
|
*/
|
|
|
|
//called upon POST settings form submit
|
|
void handleSettingsSet(AsyncWebServerRequest *request, byte subPage)
|
|
{
|
|
// PIN code request
|
|
if (subPage == 252)
|
|
{
|
|
correctPIN = (strlen(settingsPIN)==0 || strncmp(settingsPIN, request->arg(F("PIN")).c_str(), 4)==0);
|
|
lastEditTime = millis();
|
|
return;
|
|
}
|
|
|
|
//0: menu 1: wifi 2: leds 3: ui 4: sync 5: time 6: sec 7: DMX 8: usermods 9: N/A 10: 2D
|
|
if (subPage <1 || subPage >10 || !correctPIN) return;
|
|
|
|
//WIFI SETTINGS
|
|
if (subPage == 1)
|
|
{
|
|
strlcpy(clientSSID,request->arg(F("CS")).c_str(), 33);
|
|
|
|
if (!isAsterisksOnly(request->arg(F("CP")).c_str(), 65)) strlcpy(clientPass, request->arg(F("CP")).c_str(), 65);
|
|
|
|
strlcpy(cmDNS, request->arg(F("CM")).c_str(), 33);
|
|
|
|
apBehavior = request->arg(F("AB")).toInt();
|
|
strlcpy(apSSID, request->arg(F("AS")).c_str(), 33);
|
|
apHide = request->hasArg(F("AH"));
|
|
int passlen = request->arg(F("AP")).length();
|
|
if (passlen == 0 || (passlen > 7 && !isAsterisksOnly(request->arg(F("AP")).c_str(), 65))) strlcpy(apPass, request->arg(F("AP")).c_str(), 65);
|
|
int t = request->arg(F("AC")).toInt(); if (t > 0 && t < 14) apChannel = t;
|
|
|
|
noWifiSleep = request->hasArg(F("WS"));
|
|
|
|
#ifdef WLED_USE_ETHERNET
|
|
ethernetType = request->arg(F("ETH")).toInt();
|
|
WLED::instance().initEthernet();
|
|
#endif
|
|
|
|
char k[3]; k[2] = 0;
|
|
for (int i = 0; i<4; i++)
|
|
{
|
|
k[1] = i+48;//ascii 0,1,2,3
|
|
|
|
k[0] = 'I'; //static IP
|
|
staticIP[i] = request->arg(k).toInt();
|
|
|
|
k[0] = 'G'; //gateway
|
|
staticGateway[i] = request->arg(k).toInt();
|
|
|
|
k[0] = 'S'; //subnet
|
|
staticSubnet[i] = request->arg(k).toInt();
|
|
}
|
|
}
|
|
|
|
//LED SETTINGS
|
|
if (subPage == 2)
|
|
{
|
|
int t = 0;
|
|
|
|
if (rlyPin>=0 && pinManager.isPinAllocated(rlyPin, PinOwner::Relay)) {
|
|
pinManager.deallocatePin(rlyPin, PinOwner::Relay);
|
|
}
|
|
if (irPin>=0 && pinManager.isPinAllocated(irPin, PinOwner::IR)) {
|
|
pinManager.deallocatePin(irPin, PinOwner::IR);
|
|
}
|
|
for (uint8_t s=0; s<WLED_MAX_BUTTONS; s++) {
|
|
if (btnPin[s]>=0 && pinManager.isPinAllocated(btnPin[s], PinOwner::Button)) {
|
|
pinManager.deallocatePin(btnPin[s], PinOwner::Button);
|
|
}
|
|
}
|
|
|
|
uint8_t colorOrder, type, skip, awmode, channelSwap;
|
|
uint16_t length, start;
|
|
uint8_t pins[5] = {255, 255, 255, 255, 255};
|
|
|
|
autoSegments = request->hasArg(F("MS"));
|
|
correctWB = request->hasArg(F("CCT"));
|
|
cctFromRgb = request->hasArg(F("CR"));
|
|
strip.cctBlending = request->arg(F("CB")).toInt();
|
|
Bus::setCCTBlend(strip.cctBlending);
|
|
Bus::setAutoWhiteMode(request->arg(F("AW")).toInt());
|
|
strip.setTargetFps(request->arg(F("FR")).toInt());
|
|
strip.useLedsArray = request->hasArg(F("LD"));
|
|
|
|
bool busesChanged = false;
|
|
for (uint8_t s = 0; s < WLED_MAX_BUSSES+WLED_MIN_VIRTUAL_BUSSES; s++) {
|
|
char lp[4] = "L0"; lp[2] = 48+s; lp[3] = 0; //ascii 0-9 //strip data pin
|
|
char lc[4] = "LC"; lc[2] = 48+s; lc[3] = 0; //strip length
|
|
char co[4] = "CO"; co[2] = 48+s; co[3] = 0; //strip color order
|
|
char lt[4] = "LT"; lt[2] = 48+s; lt[3] = 0; //strip type
|
|
char ls[4] = "LS"; ls[2] = 48+s; ls[3] = 0; //strip start LED
|
|
char cv[4] = "CV"; cv[2] = 48+s; cv[3] = 0; //strip reverse
|
|
char sl[4] = "SL"; sl[2] = 48+s; sl[3] = 0; //skip first N LEDs
|
|
char rf[4] = "RF"; rf[2] = 48+s; rf[3] = 0; //refresh required
|
|
char aw[4] = "AW"; aw[2] = 48+s; aw[3] = 0; //auto white mode
|
|
char wo[4] = "WO"; wo[2] = 48+s; wo[3] = 0; //channel swap
|
|
if (!request->hasArg(lp)) {
|
|
DEBUG_PRINT(F("No data for "));
|
|
DEBUG_PRINTLN(s);
|
|
break;
|
|
}
|
|
for (uint8_t i = 0; i < 5; i++) {
|
|
lp[1] = 48+i;
|
|
if (!request->hasArg(lp)) break;
|
|
pins[i] = (request->arg(lp).length() > 0) ? request->arg(lp).toInt() : 255;
|
|
}
|
|
type = request->arg(lt).toInt();
|
|
type |= request->hasArg(rf) << 7; // off refresh override
|
|
skip = request->arg(sl).toInt();
|
|
colorOrder = request->arg(co).toInt();
|
|
start = (request->hasArg(ls)) ? request->arg(ls).toInt() : t;
|
|
if (request->hasArg(lc) && request->arg(lc).toInt() > 0) {
|
|
t += length = request->arg(lc).toInt();
|
|
} else {
|
|
break; // no parameter
|
|
}
|
|
awmode = request->arg(aw).toInt();
|
|
channelSwap = (type == TYPE_SK6812_RGBW || type == TYPE_TM1814) ? request->arg(wo).toInt() : 0;
|
|
// actual finalization is done in WLED::loop() (removing old busses and adding new)
|
|
// this may happen even before this loop is finished so we do "doInitBusses" after the loop
|
|
if (busConfigs[s] != nullptr) delete busConfigs[s];
|
|
busConfigs[s] = new BusConfig(type, pins, start, length, colorOrder | (channelSwap<<4), request->hasArg(cv), skip, awmode);
|
|
busesChanged = true;
|
|
}
|
|
//doInitBusses = busesChanged; // we will do that below to ensure all input data is processed
|
|
|
|
ColorOrderMap com = {};
|
|
for (uint8_t s = 0; s < WLED_MAX_COLOR_ORDER_MAPPINGS; s++) {
|
|
char xs[4] = "XS"; xs[2] = 48+s; xs[3] = 0; //start LED
|
|
char xc[4] = "XC"; xc[2] = 48+s; xc[3] = 0; //strip length
|
|
char xo[4] = "XO"; xo[2] = 48+s; xo[3] = 0; //color order
|
|
if (request->hasArg(xs)) {
|
|
start = request->arg(xs).toInt();
|
|
length = request->arg(xc).toInt();
|
|
colorOrder = request->arg(xo).toInt();
|
|
com.add(start, length, colorOrder);
|
|
}
|
|
}
|
|
busses.updateColorOrderMap(com);
|
|
|
|
// upate other pins
|
|
int hw_ir_pin = request->arg(F("IR")).toInt();
|
|
if (pinManager.allocatePin(hw_ir_pin,false, PinOwner::IR)) {
|
|
irPin = hw_ir_pin;
|
|
} else {
|
|
irPin = -1;
|
|
}
|
|
irEnabled = request->arg(F("IT")).toInt();
|
|
irApplyToAllSelected = !request->hasArg(F("MSO"));
|
|
|
|
int hw_rly_pin = request->arg(F("RL")).toInt();
|
|
if (pinManager.allocatePin(hw_rly_pin,true, PinOwner::Relay)) {
|
|
rlyPin = hw_rly_pin;
|
|
} else {
|
|
rlyPin = -1;
|
|
}
|
|
rlyMde = (bool)request->hasArg(F("RM"));
|
|
|
|
disablePullUp = (bool)request->hasArg(F("IP"));
|
|
for (uint8_t i=0; i<WLED_MAX_BUTTONS; i++) {
|
|
char bt[4] = "BT"; bt[2] = (i<10?48:55)+i; bt[3] = 0; // button pin (use A,B,C,... if WLED_MAX_BUTTONS>10)
|
|
char be[4] = "BE"; be[2] = (i<10?48:55)+i; be[3] = 0; // button type (use A,B,C,... if WLED_MAX_BUTTONS>10)
|
|
int hw_btn_pin = request->arg(bt).toInt();
|
|
if (pinManager.allocatePin(hw_btn_pin,false,PinOwner::Button)) {
|
|
btnPin[i] = hw_btn_pin;
|
|
buttonType[i] = request->arg(be).toInt();
|
|
#ifdef ARDUINO_ARCH_ESP32
|
|
// ESP32 only: check that analog button pin is a valid ADC gpio
|
|
if (((buttonType[i] == BTN_TYPE_ANALOG) || (buttonType[i] == BTN_TYPE_ANALOG_INVERTED)) && (digitalPinToAnalogChannel(btnPin[i]) < 0))
|
|
{
|
|
// not an ADC analog pin
|
|
if (btnPin[i] >= 0) DEBUG_PRINTF("PIN ALLOC error: GPIO%d for analog button #%d is not an analog pin!\n", btnPin[i], i);
|
|
btnPin[i] = -1;
|
|
pinManager.deallocatePin(hw_btn_pin,PinOwner::Button);
|
|
}
|
|
else
|
|
#endif
|
|
{
|
|
if (disablePullUp) {
|
|
pinMode(btnPin[i], INPUT);
|
|
} else {
|
|
#ifdef ESP32
|
|
pinMode(btnPin[i], buttonType[i]==BTN_TYPE_PUSH_ACT_HIGH ? INPUT_PULLDOWN : INPUT_PULLUP);
|
|
#else
|
|
pinMode(btnPin[i], INPUT_PULLUP);
|
|
#endif
|
|
}
|
|
}
|
|
} else {
|
|
btnPin[i] = -1;
|
|
buttonType[i] = BTN_TYPE_NONE;
|
|
}
|
|
}
|
|
touchThreshold = request->arg(F("TT")).toInt();
|
|
|
|
strip.ablMilliampsMax = request->arg(F("MA")).toInt();
|
|
strip.milliampsPerLed = request->arg(F("LA")).toInt();
|
|
|
|
briS = request->arg(F("CA")).toInt();
|
|
|
|
turnOnAtBoot = request->hasArg(F("BO"));
|
|
t = request->arg(F("BP")).toInt();
|
|
if (t <= 250) bootPreset = t;
|
|
gammaCorrectBri = request->hasArg(F("GB"));
|
|
gammaCorrectCol = request->hasArg(F("GC"));
|
|
|
|
fadeTransition = request->hasArg(F("TF"));
|
|
t = request->arg(F("TD")).toInt();
|
|
if (t >= 0) transitionDelayDefault = t;
|
|
strip.paletteFade = request->hasArg(F("PF"));
|
|
|
|
nightlightTargetBri = request->arg(F("TB")).toInt();
|
|
t = request->arg(F("TL")).toInt();
|
|
if (t > 0) nightlightDelayMinsDefault = t;
|
|
nightlightDelayMins = nightlightDelayMinsDefault;
|
|
nightlightMode = request->arg(F("TW")).toInt();
|
|
|
|
t = request->arg(F("PB")).toInt();
|
|
if (t >= 0 && t < 4) strip.paletteBlend = t;
|
|
t = request->arg(F("BF")).toInt();
|
|
if (t > 0) briMultiplier = t;
|
|
|
|
doInitBusses = busesChanged;
|
|
}
|
|
|
|
//UI
|
|
if (subPage == 3)
|
|
{
|
|
strlcpy(serverDescription, request->arg(F("DS")).c_str(), 33);
|
|
syncToggleReceive = request->hasArg(F("ST"));
|
|
#ifdef WLED_ENABLE_SIMPLE_UI
|
|
if (simplifiedUI ^ request->hasArg(F("SU"))) {
|
|
// UI selection changed, invalidate browser cache
|
|
cacheInvalidate++;
|
|
}
|
|
simplifiedUI = request->hasArg(F("SU"));
|
|
#endif
|
|
}
|
|
|
|
//SYNC
|
|
if (subPage == 4)
|
|
{
|
|
int t = request->arg(F("UP")).toInt();
|
|
if (t > 0) udpPort = t;
|
|
t = request->arg(F("U2")).toInt();
|
|
if (t > 0) udpPort2 = t;
|
|
|
|
syncGroups = request->arg(F("GS")).toInt();
|
|
receiveGroups = request->arg(F("GR")).toInt();
|
|
|
|
receiveNotificationBrightness = request->hasArg(F("RB"));
|
|
receiveNotificationColor = request->hasArg(F("RC"));
|
|
receiveNotificationEffects = request->hasArg(F("RX"));
|
|
receiveSegmentOptions = request->hasArg(F("SO"));
|
|
receiveSegmentBounds = request->hasArg(F("SG"));
|
|
receiveNotifications = (receiveNotificationBrightness || receiveNotificationColor || receiveNotificationEffects || receiveSegmentOptions);
|
|
notifyDirectDefault = request->hasArg(F("SD"));
|
|
notifyDirect = notifyDirectDefault;
|
|
notifyButton = request->hasArg(F("SB"));
|
|
notifyAlexa = request->hasArg(F("SA"));
|
|
notifyHue = request->hasArg(F("SH"));
|
|
notifyMacro = request->hasArg(F("SM"));
|
|
|
|
t = request->arg(F("UR")).toInt();
|
|
if ((t>=0) && (t<30)) udpNumRetries = t;
|
|
|
|
|
|
nodeListEnabled = request->hasArg(F("NL"));
|
|
if (!nodeListEnabled) Nodes.clear();
|
|
nodeBroadcastEnabled = request->hasArg(F("NB"));
|
|
|
|
receiveDirect = request->hasArg(F("RD"));
|
|
useMainSegmentOnly = request->hasArg(F("MO"));
|
|
e131SkipOutOfSequence = request->hasArg(F("ES"));
|
|
e131Multicast = request->hasArg(F("EM"));
|
|
t = request->arg(F("EP")).toInt();
|
|
if (t > 0) e131Port = t;
|
|
t = request->arg(F("EU")).toInt();
|
|
if (t >= 0 && t <= 63999) e131Universe = t;
|
|
t = request->arg(F("DA")).toInt();
|
|
if (t >= 0 && t <= 510) DMXAddress = t;
|
|
t = request->arg(F("DM")).toInt();
|
|
if (t >= DMX_MODE_DISABLED && t <= DMX_MODE_MULTIPLE_RGBW) DMXMode = t;
|
|
t = request->arg(F("ET")).toInt();
|
|
if (t > 99 && t <= 65000) realtimeTimeoutMs = t;
|
|
arlsForceMaxBri = request->hasArg(F("FB"));
|
|
arlsDisableGammaCorrection = request->hasArg(F("RG"));
|
|
t = request->arg(F("WO")).toInt();
|
|
if (t >= -255 && t <= 255) arlsOffset = t;
|
|
|
|
alexaEnabled = request->hasArg(F("AL"));
|
|
strlcpy(alexaInvocationName, request->arg(F("AI")).c_str(), 33);
|
|
t = request->arg(F("AP")).toInt();
|
|
if (t >= 0 && t <= 9) alexaNumPresets = t;
|
|
|
|
#ifndef WLED_DISABLE_BLYNK
|
|
strlcpy(blynkHost, request->arg("BH").c_str(), 33);
|
|
t = request->arg(F("BP")).toInt();
|
|
if (t > 0) blynkPort = t;
|
|
|
|
if (request->hasArg("BK") && !request->arg("BK").equals(F("Hidden"))) {
|
|
strlcpy(blynkApiKey, request->arg("BK").c_str(), 36); initBlynk(blynkApiKey, blynkHost, blynkPort);
|
|
}
|
|
#endif
|
|
|
|
#ifdef WLED_ENABLE_MQTT
|
|
mqttEnabled = request->hasArg(F("MQ"));
|
|
strlcpy(mqttServer, request->arg(F("MS")).c_str(), 33);
|
|
t = request->arg(F("MQPORT")).toInt();
|
|
if (t > 0) mqttPort = t;
|
|
strlcpy(mqttUser, request->arg(F("MQUSER")).c_str(), 41);
|
|
if (!isAsterisksOnly(request->arg(F("MQPASS")).c_str(), 41)) strlcpy(mqttPass, request->arg(F("MQPASS")).c_str(), 65);
|
|
strlcpy(mqttClientID, request->arg(F("MQCID")).c_str(), 41);
|
|
strlcpy(mqttDeviceTopic, request->arg(F("MD")).c_str(), 33);
|
|
strlcpy(mqttGroupTopic, request->arg(F("MG")).c_str(), 33);
|
|
buttonPublishMqtt = request->hasArg(F("BM"));
|
|
#endif
|
|
|
|
#ifndef WLED_DISABLE_HUESYNC
|
|
for (int i=0;i<4;i++){
|
|
String a = "H"+String(i);
|
|
hueIP[i] = request->arg(a).toInt();
|
|
}
|
|
|
|
t = request->arg(F("HL")).toInt();
|
|
if (t > 0) huePollLightId = t;
|
|
|
|
t = request->arg(F("HI")).toInt();
|
|
if (t > 50) huePollIntervalMs = t;
|
|
|
|
hueApplyOnOff = request->hasArg(F("HO"));
|
|
hueApplyBri = request->hasArg(F("HB"));
|
|
hueApplyColor = request->hasArg(F("HC"));
|
|
huePollingEnabled = request->hasArg(F("HP"));
|
|
hueStoreAllowed = true;
|
|
reconnectHue();
|
|
#endif
|
|
|
|
t = request->arg(F("BD")).toInt();
|
|
if (t >= 96 && t <= 15000) serialBaud = t;
|
|
updateBaudRate(serialBaud *100);
|
|
}
|
|
|
|
//TIME
|
|
if (subPage == 5)
|
|
{
|
|
ntpEnabled = request->hasArg(F("NT"));
|
|
strlcpy(ntpServerName, request->arg(F("NS")).c_str(), 33);
|
|
useAMPM = !request->hasArg(F("CF"));
|
|
currentTimezone = request->arg(F("TZ")).toInt();
|
|
utcOffsetSecs = request->arg(F("UO")).toInt();
|
|
|
|
//start ntp if not already connected
|
|
if (ntpEnabled && WLED_CONNECTED && !ntpConnected) ntpConnected = ntpUdp.begin(ntpLocalPort);
|
|
ntpLastSyncTime = 0; // force new NTP query
|
|
|
|
longitude = request->arg(F("LN")).toFloat();
|
|
latitude = request->arg(F("LT")).toFloat();
|
|
// force a sunrise/sunset re-calculation
|
|
calculateSunriseAndSunset();
|
|
|
|
overlayCurrent = request->hasArg(F("OL")) ? 1 : 0;
|
|
|
|
overlayMin = request->arg(F("O1")).toInt();
|
|
overlayMax = request->arg(F("O2")).toInt();
|
|
analogClock12pixel = request->arg(F("OM")).toInt();
|
|
analogClock5MinuteMarks = request->hasArg(F("O5"));
|
|
analogClockSecondsTrail = request->hasArg(F("OS"));
|
|
|
|
countdownMode = request->hasArg(F("CE"));
|
|
countdownYear = request->arg(F("CY")).toInt();
|
|
countdownMonth = request->arg(F("CI")).toInt();
|
|
countdownDay = request->arg(F("CD")).toInt();
|
|
countdownHour = request->arg(F("CH")).toInt();
|
|
countdownMin = request->arg(F("CM")).toInt();
|
|
countdownSec = request->arg(F("CS")).toInt();
|
|
setCountdown();
|
|
|
|
macroAlexaOn = request->arg(F("A0")).toInt();
|
|
macroAlexaOff = request->arg(F("A1")).toInt();
|
|
macroCountdown = request->arg(F("MC")).toInt();
|
|
macroNl = request->arg(F("MN")).toInt();
|
|
for (uint8_t i=0; i<WLED_MAX_BUTTONS; i++) {
|
|
char mp[4] = "MP"; mp[2] = (i<10?48:55)+i; mp[3] = 0; // short
|
|
char ml[4] = "ML"; ml[2] = (i<10?48:55)+i; ml[3] = 0; // long
|
|
char md[4] = "MD"; md[2] = (i<10?48:55)+i; md[3] = 0; // double
|
|
//if (!request->hasArg(mp)) break;
|
|
macroButton[i] = request->arg(mp).toInt(); // these will default to 0 if not present
|
|
macroLongPress[i] = request->arg(ml).toInt();
|
|
macroDoublePress[i] = request->arg(md).toInt();
|
|
}
|
|
|
|
char k[3]; k[2] = 0;
|
|
for (int i = 0; i<10; i++) {
|
|
k[1] = i+48;//ascii 0,1,2,3,...
|
|
k[0] = 'H'; //timer hours
|
|
timerHours[i] = request->arg(k).toInt();
|
|
k[0] = 'N'; //minutes
|
|
timerMinutes[i] = request->arg(k).toInt();
|
|
k[0] = 'T'; //macros
|
|
timerMacro[i] = request->arg(k).toInt();
|
|
k[0] = 'W'; //weekdays
|
|
timerWeekday[i] = request->arg(k).toInt();
|
|
if (i<8) {
|
|
k[0] = 'M'; //start month
|
|
timerMonth[i] = request->arg(k).toInt() & 0x0F;
|
|
timerMonth[i] <<= 4;
|
|
k[0] = 'P'; //end month
|
|
timerMonth[i] += (request->arg(k).toInt() & 0x0F);
|
|
k[0] = 'D'; //start day
|
|
timerDay[i] = request->arg(k).toInt();
|
|
k[0] = 'E'; //end day
|
|
timerDayEnd[i] = request->arg(k).toInt();
|
|
}
|
|
}
|
|
}
|
|
|
|
//SECURITY
|
|
if (subPage == 6)
|
|
{
|
|
if (request->hasArg(F("RS"))) //complete factory reset
|
|
{
|
|
WLED_FS.format();
|
|
#ifdef WLED_ADD_EEPROM_SUPPORT
|
|
clearEEPROM();
|
|
#endif
|
|
serveMessage(request, 200, F("All Settings erased."), F("Connect to WLED-AP to setup again"),255);
|
|
doReboot = true;
|
|
}
|
|
|
|
if (request->hasArg(F("PIN"))) {
|
|
const char *pin = request->arg(F("PIN")).c_str();
|
|
uint8_t pinLen = strlen(pin);
|
|
if (pinLen == 4 || pinLen == 0) {
|
|
uint8_t numZeros = 0;
|
|
for (uint8_t i = 0; i < pinLen; i++) numZeros += (pin[i] == '0');
|
|
if (numZeros < pinLen || pinLen == 0) { // ignore 0000 input (placeholder)
|
|
strlcpy(settingsPIN, pin, 5);
|
|
}
|
|
settingsPIN[4] = 0;
|
|
}
|
|
}
|
|
|
|
bool pwdCorrect = !otaLock; //always allow access if ota not locked
|
|
if (request->hasArg(F("OP")))
|
|
{
|
|
if (otaLock && strcmp(otaPass,request->arg(F("OP")).c_str()) == 0)
|
|
{
|
|
// brute force protection: do not unlock even if correct if last save was less than 3 seconds ago
|
|
if (millis() - lastEditTime > 3000) pwdCorrect = true;
|
|
}
|
|
if (!otaLock && request->arg(F("OP")).length() > 0)
|
|
{
|
|
strlcpy(otaPass,request->arg(F("OP")).c_str(), 33); // set new OTA password
|
|
}
|
|
}
|
|
|
|
if (pwdCorrect) //allow changes if correct pwd or no ota active
|
|
{
|
|
otaLock = request->hasArg(F("NO"));
|
|
wifiLock = request->hasArg(F("OW"));
|
|
aOtaEnabled = request->hasArg(F("AO"));
|
|
//createEditHandler(correctPIN && !otaLock);
|
|
}
|
|
}
|
|
|
|
#ifdef WLED_ENABLE_DMX // include only if DMX is enabled
|
|
if (subPage == 7)
|
|
{
|
|
int t = request->arg(F("PU")).toInt();
|
|
if (t >= 0 && t <= 63999) e131ProxyUniverse = t;
|
|
|
|
t = request->arg(F("CN")).toInt();
|
|
if (t>0 && t<16) {
|
|
DMXChannels = t;
|
|
}
|
|
t = request->arg(F("CS")).toInt();
|
|
if (t>0 && t<513) {
|
|
DMXStart = t;
|
|
}
|
|
t = request->arg(F("CG")).toInt();
|
|
if (t>0 && t<513) {
|
|
DMXGap = t;
|
|
}
|
|
t = request->arg(F("SL")).toInt();
|
|
if (t>=0 && t < MAX_LEDS) {
|
|
DMXStartLED = t;
|
|
}
|
|
for (int i=0; i<15; i++) {
|
|
String argname = "CH" + String((i+1));
|
|
t = request->arg(argname).toInt();
|
|
DMXFixtureMap[i] = t;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
//USERMODS
|
|
if (subPage == 8)
|
|
{
|
|
if (!requestJSONBufferLock(5)) return;
|
|
|
|
// global I2C & SPI pins
|
|
int8_t hw_sda_pin = !request->arg(F("SDA")).length() ? -1 : (int)request->arg(F("SDA")).toInt();
|
|
int8_t hw_scl_pin = !request->arg(F("SCL")).length() ? -1 : (int)request->arg(F("SCL")).toInt();
|
|
#ifdef ESP8266
|
|
// cannot change pins on ESP8266
|
|
if (hw_sda_pin >= 0 && hw_sda_pin != HW_PIN_SDA) hw_sda_pin = HW_PIN_SDA;
|
|
if (hw_scl_pin >= 0 && hw_scl_pin != HW_PIN_SCL) hw_scl_pin = HW_PIN_SCL;
|
|
#endif
|
|
PinManagerPinType i2c[2] = { { hw_sda_pin, true }, { hw_scl_pin, true } };
|
|
if (hw_sda_pin >= 0 && hw_scl_pin >= 0 && pinManager.allocateMultiplePins(i2c, 2, PinOwner::HW_I2C)) {
|
|
i2c_sda = hw_sda_pin;
|
|
i2c_scl = hw_scl_pin;
|
|
#ifdef ESP32
|
|
Wire.setPins(i2c_sda, i2c_scl); // this will fail if Wire is initilised (Wire.begin() called)
|
|
#endif
|
|
Wire.begin();
|
|
} else {
|
|
// there is no Wire.end()
|
|
DEBUG_PRINTLN(F("Could not allocate I2C pins."));
|
|
uint8_t i2c[2] = { static_cast<uint8_t>(i2c_scl), static_cast<uint8_t>(i2c_sda) };
|
|
pinManager.deallocateMultiplePins(i2c, 2, PinOwner::HW_I2C); // just in case deallocation of old pins
|
|
i2c_sda = -1;
|
|
i2c_scl = -1;
|
|
}
|
|
int8_t hw_mosi_pin = !request->arg(F("MOSI")).length() ? -1 : (int)request->arg(F("MOSI")).toInt();
|
|
int8_t hw_miso_pin = !request->arg(F("MISO")).length() ? -1 : (int)request->arg(F("MISO")).toInt();
|
|
int8_t hw_sclk_pin = !request->arg(F("SCLK")).length() ? -1 : (int)request->arg(F("SCLK")).toInt();
|
|
#ifdef ESP8266
|
|
// cannot change pins on ESP8266
|
|
if (hw_mosi_pin >= 0 && hw_mosi_pin != HW_PIN_DATASPI) hw_mosi_pin = HW_PIN_DATASPI;
|
|
if (hw_miso_pin >= 0 && hw_miso_pin != HW_PIN_MISOSPI) hw_mosi_pin = HW_PIN_MISOSPI;
|
|
if (hw_sclk_pin >= 0 && hw_sclk_pin != HW_PIN_CLOCKSPI) hw_sclk_pin = HW_PIN_CLOCKSPI;
|
|
#endif
|
|
PinManagerPinType spi[3] = { { hw_mosi_pin, true }, { hw_miso_pin, true }, { hw_sclk_pin, true } };
|
|
if (hw_mosi_pin >= 0 && hw_sclk_pin >= 0 && pinManager.allocateMultiplePins(spi, 3, PinOwner::HW_SPI)) {
|
|
spi_mosi = hw_mosi_pin;
|
|
spi_miso = hw_miso_pin;
|
|
spi_sclk = hw_sclk_pin;
|
|
// no bus re-initialisation as usermods do not get any notification
|
|
//SPI.end();
|
|
#ifdef ESP32
|
|
//SPI.begin(spi_sclk, spi_miso, spi_mosi);
|
|
#else
|
|
//SPI.begin();
|
|
#endif
|
|
} else {
|
|
//SPI.end();
|
|
DEBUG_PRINTLN(F("Could not allocate SPI pins."));
|
|
uint8_t spi[3] = { static_cast<uint8_t>(spi_mosi), static_cast<uint8_t>(spi_miso), static_cast<uint8_t>(spi_sclk) };
|
|
pinManager.deallocateMultiplePins(spi, 3, PinOwner::HW_SPI); // just in case deallocation of old pins
|
|
spi_mosi = -1;
|
|
spi_miso = -1;
|
|
spi_sclk = -1;
|
|
}
|
|
|
|
JsonObject um = doc.createNestedObject("um");
|
|
|
|
size_t args = request->args();
|
|
uint16_t j=0;
|
|
for (size_t i=0; i<args; i++) {
|
|
String name = request->argName(i);
|
|
String value = request->arg(i);
|
|
|
|
// POST request parameters are combined as <usermodname>_<usermodparameter>
|
|
int umNameEnd = name.indexOf(":");
|
|
if (umNameEnd<1) continue; // parameter does not contain ":" or on 1st place -> wrong
|
|
|
|
JsonObject mod = um[name.substring(0,umNameEnd)]; // get a usermod JSON object
|
|
if (mod.isNull()) {
|
|
mod = um.createNestedObject(name.substring(0,umNameEnd)); // if it does not exist create it
|
|
}
|
|
DEBUG_PRINT(name.substring(0,umNameEnd));
|
|
DEBUG_PRINT(":");
|
|
name = name.substring(umNameEnd+1); // remove mod name from string
|
|
|
|
// if the resulting name still contains ":" this means nested object
|
|
JsonObject subObj;
|
|
int umSubObj = name.indexOf(":");
|
|
DEBUG_PRINTF("(%d):",umSubObj);
|
|
if (umSubObj>0) {
|
|
subObj = mod[name.substring(0,umSubObj)];
|
|
if (subObj.isNull())
|
|
subObj = mod.createNestedObject(name.substring(0,umSubObj));
|
|
name = name.substring(umSubObj+1); // remove nested object name from string
|
|
} else {
|
|
subObj = mod;
|
|
}
|
|
DEBUG_PRINT(name);
|
|
|
|
// check if parameters represent array
|
|
if (name.endsWith("[]")) {
|
|
name.replace("[]","");
|
|
value.replace(",","."); // just in case conversion
|
|
if (!subObj[name].is<JsonArray>()) {
|
|
JsonArray ar = subObj.createNestedArray(name);
|
|
if (value.indexOf(".") >= 0) ar.add(value.toFloat()); // we do have a float
|
|
else ar.add(value.toInt()); // we may have an int
|
|
j=0;
|
|
} else {
|
|
if (value.indexOf(".") >= 0) subObj[name].add(value.toFloat()); // we do have a float
|
|
else subObj[name].add(value.toInt()); // we may have an int
|
|
j++;
|
|
}
|
|
DEBUG_PRINT("[");
|
|
DEBUG_PRINT(j);
|
|
DEBUG_PRINT("] = ");
|
|
DEBUG_PRINTLN(value);
|
|
} else {
|
|
// we are using a hidden field with the same name as our parameter (!before the actual parameter!)
|
|
// to describe the type of parameter (text,float,int), for boolean patameters the first field contains "off"
|
|
// so checkboxes have one or two fields (first is always "false", existence of second depends on checkmark and may be "true")
|
|
if (subObj[name].isNull()) {
|
|
// the first occurence of the field describes the parameter type (used in next loop)
|
|
if (value == "false") subObj[name] = false; // checkboxes may have only one field
|
|
else subObj[name] = value;
|
|
} else {
|
|
String type = subObj[name].as<String>(); // get previously stored value as a type
|
|
if (subObj[name].is<bool>()) subObj[name] = true; // checkbox/boolean
|
|
else if (type == "number") {
|
|
value.replace(",","."); // just in case conversion
|
|
if (value.indexOf(".") >= 0) subObj[name] = value.toFloat(); // we do have a float
|
|
else subObj[name] = value.toInt(); // we may have an int
|
|
} else if (type == "int") subObj[name] = value.toInt();
|
|
else subObj[name] = value; // text fields
|
|
}
|
|
DEBUG_PRINT(" = ");
|
|
DEBUG_PRINTLN(value);
|
|
}
|
|
}
|
|
usermods.readFromConfig(um); // force change of usermod parameters
|
|
DEBUG_PRINTLN(F("Done re-init usermods."));
|
|
releaseJSONBufferLock();
|
|
}
|
|
|
|
#ifndef WLED_DISABLE_2D
|
|
//2D panels
|
|
if (subPage == 10)
|
|
{
|
|
strip.isMatrix = request->arg(F("SOMP")).toInt();
|
|
// strip.panelH = MAX(1,MIN(128,request->arg(F("PH")).toInt()));
|
|
// strip.panelW = MAX(1,MIN(128,request->arg(F("PW")).toInt()));
|
|
strip.panel.clear(); // release memory if allocated
|
|
if (strip.isMatrix) {
|
|
strip.panels = MAX(1,MIN(WLED_MAX_PANELS,request->arg(F("MPC")).toInt()));
|
|
strip.matrix.bottomStart = request->arg(F("PB")).toInt();
|
|
strip.matrix.rightStart = request->arg(F("PR")).toInt();
|
|
strip.matrix.vertical = request->arg(F("PV")).toInt();
|
|
strip.matrix.serpentine = request->hasArg(F("PS"));
|
|
strip.panel.reserve(strip.panels); // pre-allocate memory
|
|
for (uint8_t i=0; i<strip.panels; i++) {
|
|
WS2812FX::Panel p;
|
|
char pO[8] = { '\0' };
|
|
snprintf_P(pO, 7, PSTR("P%d"), i); // MAX_PANELS is 64 so pO will always only be 4 characters or less
|
|
pO[7] = '\0';
|
|
uint8_t l = strlen(pO);
|
|
// create P0B, P1B, ..., P63B, etc for other PxxX
|
|
pO[l] = 'B'; if (!request->hasArg(pO)) break;
|
|
pO[l] = 'B'; p.bottomStart = request->arg(pO).toInt();
|
|
pO[l] = 'R'; p.rightStart = request->arg(pO).toInt();
|
|
pO[l] = 'V'; p.vertical = request->arg(pO).toInt();
|
|
pO[l] = 'S'; p.serpentine = request->hasArg(pO);
|
|
pO[l] = 'X'; p.xOffset = request->arg(pO).toInt();
|
|
pO[l] = 'Y'; p.yOffset = request->arg(pO).toInt();
|
|
pO[l] = 'W'; p.width = request->arg(pO).toInt();
|
|
pO[l] = 'H'; p.height = request->arg(pO).toInt();
|
|
strip.panel.push_back(p);
|
|
}
|
|
} else {
|
|
Segment::maxWidth = strip.getLengthTotal();
|
|
Segment::maxHeight = 1;
|
|
}
|
|
strip.setUpMatrix(); // will check limits
|
|
}
|
|
#endif
|
|
|
|
lastEditTime = millis();
|
|
if (subPage != 2 && !doReboot) doSerializeConfig = true; //serializeConfig(); //do not save if factory reset or LED settings (which are saved after LED re-init)
|
|
#ifndef WLED_DISABLE_ALEXA
|
|
if (subPage == 4) alexaInit();
|
|
#endif
|
|
}
|
|
|
|
|
|
//HTTP API request parser
|
|
bool handleSet(AsyncWebServerRequest *request, const String& req, bool apply)
|
|
{
|
|
if (!(req.indexOf("win") >= 0)) return false;
|
|
|
|
int pos = 0;
|
|
DEBUG_PRINT(F("API req: "));
|
|
DEBUG_PRINTLN(req);
|
|
|
|
//segment select (sets main segment)
|
|
pos = req.indexOf(F("SM="));
|
|
if (pos > 0 && !realtimeMode) {
|
|
strip.setMainSegmentId(getNumVal(&req, pos));
|
|
}
|
|
|
|
byte selectedSeg = strip.getFirstSelectedSegId();
|
|
|
|
bool singleSegment = false;
|
|
|
|
pos = req.indexOf(F("SS="));
|
|
if (pos > 0) {
|
|
byte t = getNumVal(&req, pos);
|
|
if (t < strip.getSegmentsNum()) {
|
|
selectedSeg = t;
|
|
singleSegment = true;
|
|
}
|
|
}
|
|
|
|
Segment& selseg = strip.getSegment(selectedSeg);
|
|
pos = req.indexOf(F("SV=")); //segment selected
|
|
if (pos > 0) {
|
|
byte t = getNumVal(&req, pos);
|
|
if (t == 2) for (uint8_t i = 0; i < strip.getSegmentsNum(); i++) strip.getSegment(i).selected = false; // unselect other segments
|
|
selseg.selected = t;
|
|
}
|
|
|
|
// temporary values, write directly to segments, globals are updated by setValuesFromFirstSelectedSeg()
|
|
uint32_t col0 = selseg.colors[0];
|
|
uint32_t col1 = selseg.colors[1];
|
|
byte colIn[4] = {R(col0), G(col0), B(col0), W(col0)};
|
|
byte colInSec[4] = {R(col1), G(col1), B(col1), W(col1)};
|
|
byte effectIn = selseg.mode;
|
|
byte speedIn = selseg.speed;
|
|
byte intensityIn = selseg.intensity;
|
|
byte paletteIn = selseg.palette;
|
|
byte custom1In = selseg.custom1;
|
|
byte custom2In = selseg.custom2;
|
|
byte custom3In = selseg.custom3;
|
|
byte check1In = selseg.check1;
|
|
byte check2In = selseg.check2;
|
|
byte check3In = selseg.check3;
|
|
uint16_t startI = selseg.start;
|
|
uint16_t stopI = selseg.stop;
|
|
uint16_t startY = selseg.startY;
|
|
uint16_t stopY = selseg.stopY;
|
|
uint8_t grpI = selseg.grouping;
|
|
uint16_t spcI = selseg.spacing;
|
|
pos = req.indexOf(F("&S=")); //segment start
|
|
if (pos > 0) {
|
|
startI = getNumVal(&req, pos);
|
|
}
|
|
pos = req.indexOf(F("S2=")); //segment stop
|
|
if (pos > 0) {
|
|
stopI = getNumVal(&req, pos);
|
|
}
|
|
pos = req.indexOf(F("GP=")); //segment grouping
|
|
if (pos > 0) {
|
|
grpI = getNumVal(&req, pos);
|
|
if (grpI == 0) grpI = 1;
|
|
}
|
|
pos = req.indexOf(F("SP=")); //segment spacing
|
|
if (pos > 0) {
|
|
spcI = getNumVal(&req, pos);
|
|
}
|
|
selseg.set(startI, stopI, grpI, spcI, UINT16_MAX, startY, stopY);
|
|
|
|
pos = req.indexOf(F("RV=")); //Segment reverse
|
|
if (pos > 0) selseg.reverse = req.charAt(pos+3) != '0';
|
|
|
|
pos = req.indexOf(F("MI=")); //Segment mirror
|
|
if (pos > 0) selseg.mirror = req.charAt(pos+3) != '0';
|
|
|
|
pos = req.indexOf(F("SB=")); //Segment brightness/opacity
|
|
if (pos > 0) {
|
|
byte segbri = getNumVal(&req, pos);
|
|
selseg.setOption(SEG_OPTION_ON, segbri); // use transition
|
|
if (segbri) {
|
|
selseg.setOpacity(segbri);
|
|
}
|
|
}
|
|
|
|
pos = req.indexOf(F("SW=")); //segment power
|
|
if (pos > 0) {
|
|
switch (getNumVal(&req, pos)) {
|
|
case 0: selseg.setOption(SEG_OPTION_ON, false); break; // use transition
|
|
case 1: selseg.setOption(SEG_OPTION_ON, true); break; // use transition
|
|
default: selseg.setOption(SEG_OPTION_ON, !selseg.on); break; // use transition
|
|
}
|
|
}
|
|
|
|
pos = req.indexOf(F("PS=")); //saves current in preset
|
|
if (pos > 0) savePreset(getNumVal(&req, pos));
|
|
|
|
pos = req.indexOf(F("P1=")); //sets first preset for cycle
|
|
if (pos > 0) presetCycMin = getNumVal(&req, pos);
|
|
|
|
pos = req.indexOf(F("P2=")); //sets last preset for cycle
|
|
if (pos > 0) presetCycMax = getNumVal(&req, pos);
|
|
|
|
//apply preset
|
|
if (updateVal(req.c_str(), "PL=", &presetCycCurr, presetCycMin, presetCycMax)) {
|
|
unloadPlaylist();
|
|
applyPreset(presetCycCurr);
|
|
}
|
|
|
|
//set brightness
|
|
updateVal(req.c_str(), "&A=", &bri);
|
|
|
|
bool col0Changed = false, col1Changed = false;
|
|
//set colors
|
|
col0Changed |= updateVal(req.c_str(), "&R=", &colIn[0]);
|
|
col0Changed |= updateVal(req.c_str(), "&G=", &colIn[1]);
|
|
col0Changed |= updateVal(req.c_str(), "&B=", &colIn[2]);
|
|
col0Changed |= updateVal(req.c_str(), "&W=", &colIn[3]);
|
|
|
|
col1Changed |= updateVal(req.c_str(), "R2=", &colInSec[0]);
|
|
col1Changed |= updateVal(req.c_str(), "G2=", &colInSec[1]);
|
|
col1Changed |= updateVal(req.c_str(), "B2=", &colInSec[2]);
|
|
col1Changed |= updateVal(req.c_str(), "W2=", &colInSec[3]);
|
|
|
|
#ifdef WLED_ENABLE_LOXONE
|
|
//lox parser
|
|
pos = req.indexOf(F("LX=")); // Lox primary color
|
|
if (pos > 0) {
|
|
int lxValue = getNumVal(&req, pos);
|
|
if (parseLx(lxValue, colIn)) {
|
|
bri = 255;
|
|
nightlightActive = false; //always disable nightlight when toggling
|
|
col0Changed = true;
|
|
}
|
|
}
|
|
pos = req.indexOf(F("LY=")); // Lox secondary color
|
|
if (pos > 0) {
|
|
int lxValue = getNumVal(&req, pos);
|
|
if(parseLx(lxValue, colInSec)) {
|
|
bri = 255;
|
|
nightlightActive = false; //always disable nightlight when toggling
|
|
col1Changed = true;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
//set hue
|
|
pos = req.indexOf(F("HU="));
|
|
if (pos > 0) {
|
|
uint16_t temphue = getNumVal(&req, pos);
|
|
byte tempsat = 255;
|
|
pos = req.indexOf(F("SA="));
|
|
if (pos > 0) {
|
|
tempsat = getNumVal(&req, pos);
|
|
}
|
|
byte sec = req.indexOf(F("H2"));
|
|
colorHStoRGB(temphue, tempsat, (sec>0) ? colInSec : colIn);
|
|
col0Changed |= (!sec); col1Changed |= sec;
|
|
}
|
|
|
|
//set white spectrum (kelvin)
|
|
pos = req.indexOf(F("&K="));
|
|
if (pos > 0) {
|
|
byte sec = req.indexOf(F("K2"));
|
|
colorKtoRGB(getNumVal(&req, pos), (sec>0) ? colInSec : colIn);
|
|
col0Changed |= (!sec); col1Changed |= sec;
|
|
}
|
|
|
|
//set color from HEX or 32bit DEC
|
|
byte tmpCol[4];
|
|
pos = req.indexOf(F("CL="));
|
|
if (pos > 0) {
|
|
colorFromDecOrHexString(colIn, (char*)req.substring(pos + 3).c_str());
|
|
col0Changed = true;
|
|
}
|
|
pos = req.indexOf(F("C2="));
|
|
if (pos > 0) {
|
|
colorFromDecOrHexString(colInSec, (char*)req.substring(pos + 3).c_str());
|
|
col1Changed = true;
|
|
}
|
|
pos = req.indexOf(F("C3="));
|
|
if (pos > 0) {
|
|
colorFromDecOrHexString(tmpCol, (char*)req.substring(pos + 3).c_str());
|
|
uint32_t col2 = RGBW32(tmpCol[0], tmpCol[1], tmpCol[2], tmpCol[3]);
|
|
selseg.setColor(2, col2); // defined above (SS= or main)
|
|
if (!singleSegment) strip.setColor(2, col2); // will set color to all active & selected segments
|
|
}
|
|
|
|
//set to random hue SR=0->1st SR=1->2nd
|
|
pos = req.indexOf(F("SR"));
|
|
if (pos > 0) {
|
|
byte sec = getNumVal(&req, pos);
|
|
setRandomColor(sec? colInSec : colIn);
|
|
col0Changed |= (!sec); col1Changed |= sec;
|
|
}
|
|
|
|
//swap 2nd & 1st
|
|
pos = req.indexOf(F("SC"));
|
|
if (pos > 0) {
|
|
byte temp;
|
|
for (uint8_t i=0; i<4; i++) {
|
|
temp = colIn[i];
|
|
colIn[i] = colInSec[i];
|
|
colInSec[i] = temp;
|
|
}
|
|
col0Changed = col1Changed = true;
|
|
}
|
|
|
|
// apply colors to selected segment, and all selected segments if applicable
|
|
if (col0Changed) {
|
|
uint32_t colIn0 = RGBW32(colIn[0], colIn[1], colIn[2], colIn[3]);
|
|
selseg.setColor(0, colIn0);
|
|
if (!singleSegment) strip.setColor(0, colIn0); // will set color to all active & selected segments
|
|
}
|
|
|
|
if (col1Changed) {
|
|
uint32_t colIn1 = RGBW32(colInSec[0], colInSec[1], colInSec[2], colInSec[3]);
|
|
selseg.setColor(1, colIn1);
|
|
if (!singleSegment) strip.setColor(1, colIn1); // will set color to all active & selected segments
|
|
}
|
|
|
|
bool fxModeChanged = false, speedChanged = false, intensityChanged = false, paletteChanged = false;
|
|
bool custom1Changed = false, custom2Changed = false, custom3Changed = false, check1Changed = false, check2Changed = false, check3Changed = false;
|
|
// set effect parameters
|
|
if (updateVal(req.c_str(), "FX=", &effectIn, 0, strip.getModeCount()-1)) {
|
|
if (request != nullptr) unloadPlaylist(); // unload playlist if changing FX using web request
|
|
fxModeChanged = true;
|
|
}
|
|
speedChanged = updateVal(req.c_str(), "SX=", &speedIn);
|
|
intensityChanged = updateVal(req.c_str(), "IX=", &intensityIn);
|
|
paletteChanged = updateVal(req.c_str(), "FP=", &paletteIn, 0, strip.getPaletteCount()-1);
|
|
custom1Changed = updateVal(req.c_str(), "X1=", &custom1In);
|
|
custom2Changed = updateVal(req.c_str(), "X2=", &custom2In);
|
|
custom3Changed = updateVal(req.c_str(), "X3=", &custom3In);
|
|
check1Changed = updateVal(req.c_str(), "M1=", &check1In);
|
|
check2Changed = updateVal(req.c_str(), "M2=", &check2In);
|
|
check3Changed = updateVal(req.c_str(), "M3=", &check3In);
|
|
|
|
stateChanged |= (fxModeChanged || speedChanged || intensityChanged || paletteChanged || custom1Changed || custom2Changed || custom3Changed || check1Changed || check2Changed || check3Changed);
|
|
|
|
// apply to main and all selected segments to prevent #1618.
|
|
for (uint8_t i = 0; i < strip.getSegmentsNum(); i++) {
|
|
Segment& seg = strip.getSegment(i);
|
|
if (i != selectedSeg && (singleSegment || !seg.isActive() || !seg.isSelected())) continue; // skip non main segments if not applying to all
|
|
if (fxModeChanged) seg.setMode(effectIn, req.indexOf(F("FXD="))>0); // apply defaults if FXD= is specified
|
|
if (speedChanged) seg.speed = speedIn;
|
|
if (intensityChanged) seg.intensity = intensityIn;
|
|
if (paletteChanged) seg.setPalette(paletteIn);
|
|
if (custom1Changed) seg.custom1 = custom1In;
|
|
if (custom2Changed) seg.custom2 = custom2In;
|
|
if (custom3Changed) seg.custom3 = custom3In;
|
|
if (check1Changed) seg.check1 = (bool)check1In;
|
|
if (check2Changed) seg.check2 = (bool)check2In;
|
|
if (check3Changed) seg.check3 = (bool)check3In;
|
|
}
|
|
|
|
//set advanced overlay
|
|
pos = req.indexOf(F("OL="));
|
|
if (pos > 0) {
|
|
overlayCurrent = getNumVal(&req, pos);
|
|
}
|
|
|
|
//apply macro (deprecated, added for compatibility with pre-0.11 automations)
|
|
pos = req.indexOf(F("&M="));
|
|
if (pos > 0) {
|
|
applyPreset(getNumVal(&req, pos) + 16);
|
|
}
|
|
|
|
//toggle send UDP direct notifications
|
|
pos = req.indexOf(F("SN="));
|
|
if (pos > 0) notifyDirect = (req.charAt(pos+3) != '0');
|
|
|
|
//toggle receive UDP direct notifications
|
|
pos = req.indexOf(F("RN="));
|
|
if (pos > 0) receiveNotifications = (req.charAt(pos+3) != '0');
|
|
|
|
//receive live data via UDP/Hyperion
|
|
pos = req.indexOf(F("RD="));
|
|
if (pos > 0) receiveDirect = (req.charAt(pos+3) != '0');
|
|
|
|
//main toggle on/off (parse before nightlight, #1214)
|
|
pos = req.indexOf(F("&T="));
|
|
if (pos > 0) {
|
|
nightlightActive = false; //always disable nightlight when toggling
|
|
switch (getNumVal(&req, pos))
|
|
{
|
|
case 0: if (bri != 0){briLast = bri; bri = 0;} break; //off, only if it was previously on
|
|
case 1: if (bri == 0) bri = briLast; break; //on, only if it was previously off
|
|
default: toggleOnOff(); //toggle
|
|
}
|
|
}
|
|
|
|
//toggle nightlight mode
|
|
bool aNlDef = false;
|
|
if (req.indexOf(F("&ND")) > 0) aNlDef = true;
|
|
pos = req.indexOf(F("NL="));
|
|
if (pos > 0)
|
|
{
|
|
if (req.charAt(pos+3) == '0')
|
|
{
|
|
nightlightActive = false;
|
|
} else {
|
|
nightlightActive = true;
|
|
if (!aNlDef) nightlightDelayMins = getNumVal(&req, pos);
|
|
else nightlightDelayMins = nightlightDelayMinsDefault;
|
|
nightlightStartTime = millis();
|
|
}
|
|
} else if (aNlDef)
|
|
{
|
|
nightlightActive = true;
|
|
nightlightDelayMins = nightlightDelayMinsDefault;
|
|
nightlightStartTime = millis();
|
|
}
|
|
|
|
//set nightlight target brightness
|
|
pos = req.indexOf(F("NT="));
|
|
if (pos > 0) {
|
|
nightlightTargetBri = getNumVal(&req, pos);
|
|
nightlightActiveOld = false; //re-init
|
|
}
|
|
|
|
//toggle nightlight fade
|
|
pos = req.indexOf(F("NF="));
|
|
if (pos > 0)
|
|
{
|
|
nightlightMode = getNumVal(&req, pos);
|
|
|
|
nightlightActiveOld = false; //re-init
|
|
}
|
|
if (nightlightMode > NL_MODE_SUN) nightlightMode = NL_MODE_SUN;
|
|
|
|
pos = req.indexOf(F("TT="));
|
|
if (pos > 0) transitionDelay = getNumVal(&req, pos);
|
|
|
|
//set time (unix timestamp)
|
|
pos = req.indexOf(F("ST="));
|
|
if (pos > 0) {
|
|
setTimeFromAPI(getNumVal(&req, pos));
|
|
}
|
|
|
|
//set countdown goal (unix timestamp)
|
|
pos = req.indexOf(F("CT="));
|
|
if (pos > 0) {
|
|
countdownTime = getNumVal(&req, pos);
|
|
if (countdownTime - toki.second() > 0) countdownOverTriggered = false;
|
|
}
|
|
|
|
pos = req.indexOf(F("LO="));
|
|
if (pos > 0) {
|
|
realtimeOverride = getNumVal(&req, pos);
|
|
if (realtimeOverride > 2) realtimeOverride = REALTIME_OVERRIDE_ALWAYS;
|
|
if (realtimeMode && useMainSegmentOnly) {
|
|
strip.getMainSegment().freeze = !realtimeOverride;
|
|
}
|
|
}
|
|
|
|
pos = req.indexOf(F("RB"));
|
|
if (pos > 0) doReboot = true;
|
|
|
|
// clock mode, 0: normal, 1: countdown
|
|
pos = req.indexOf(F("NM="));
|
|
if (pos > 0) countdownMode = (req.charAt(pos+3) != '0');
|
|
|
|
pos = req.indexOf(F("U0=")); //user var 0
|
|
if (pos > 0) {
|
|
userVar0 = getNumVal(&req, pos);
|
|
}
|
|
|
|
pos = req.indexOf(F("U1=")); //user var 1
|
|
if (pos > 0) {
|
|
userVar1 = getNumVal(&req, pos);
|
|
}
|
|
// you can add more if you need
|
|
|
|
// global col[], effectCurrent, ... are updated in stateChanged()
|
|
if (!apply) return true; // when called by JSON API, do not call colorUpdated() here
|
|
|
|
pos = req.indexOf(F("&NN")); //do not send UDP notifications this time
|
|
stateUpdated((pos > 0) ? CALL_MODE_NO_NOTIFY : CALL_MODE_DIRECT_CHANGE);
|
|
|
|
// internal call, does not send XML response
|
|
pos = req.indexOf(F("IN"));
|
|
if (pos < 1) XML_response(request);
|
|
|
|
return true;
|
|
}
|