WLED/wled00/const.h
cschwinne 94c5f0d7a8 New API properties
-   Added realtime override option and `lor` JSON property
-   Added `lm` (live mode) and `lip` (live IP) properties to info in JSON API
-   Added reset commands to APIs
-   Added `json/si`, returning state and info, but no FX or Palette lists
-   Added rollover detection to millis(). Can track uptimes longer than 49 days
-   Attempted to fix Wifi issues with Unifi brand APs
2020-04-30 01:52:36 +02:00

108 lines
4.5 KiB
C

#ifndef WLED_CONST_H
#define WLED_CONST_H
/*
* Readability defines and their associated numerical values + compile-time constants
*/
//Defaults
#define DEFAULT_CLIENT_SSID "Your_Network"
#define DEFAULT_AP_PASS "wled1234"
#define DEFAULT_OTA_PASS "wledota"
//Access point behavior
#define AP_BEHAVIOR_BOOT_NO_CONN 0 //Open AP when no connection after boot
#define AP_BEHAVIOR_NO_CONN 1 //Open when no connection (either after boot or if connection is lost)
#define AP_BEHAVIOR_ALWAYS 2 //Always open
#define AP_BEHAVIOR_BUTTON_ONLY 3 //Only when button pressed for 6 sec
//Notifier callMode
#define NOTIFIER_CALL_MODE_INIT 0 //no updates on init, can be used to disable updates
#define NOTIFIER_CALL_MODE_DIRECT_CHANGE 1
#define NOTIFIER_CALL_MODE_BUTTON 2
#define NOTIFIER_CALL_MODE_NOTIFICATION 3
#define NOTIFIER_CALL_MODE_NIGHTLIGHT 4
#define NOTIFIER_CALL_MODE_NO_NOTIFY 5
#define NOTIFIER_CALL_MODE_FX_CHANGED 6 //no longer used
#define NOTIFIER_CALL_MODE_HUE 7
#define NOTIFIER_CALL_MODE_PRESET_CYCLE 8
#define NOTIFIER_CALL_MODE_BLYNK 9
#define NOTIFIER_CALL_MODE_ALEXA 10
//RGB to RGBW conversion mode
#define RGBW_MODE_MANUAL_ONLY 0 //No automatic white channel calculation. Manual white channel slider
#define RGBW_MODE_AUTO_BRIGHTER 1 //New algorithm. Adds as much white as the darkest RGBW channel
#define RGBW_MODE_AUTO_ACCURATE 2 //New algorithm. Adds as much white as the darkest RGBW channel and subtracts this amount from each RGB channel
#define RGBW_MODE_DUAL 3 //Manual slider + auto calculation. Automatically calculates only if manual slider is set to off (0)
#define RGBW_MODE_LEGACY 4 //Old floating algorithm. Too slow for realtime and palette support
//realtime modes
#define REALTIME_MODE_INACTIVE 0
#define REALTIME_MODE_GENERIC 1
#define REALTIME_MODE_UDP 2
#define REALTIME_MODE_HYPERION 3
#define REALTIME_MODE_E131 4
#define REALTIME_MODE_ADALIGHT 5
#define REALTIME_MODE_ARTNET 6
//realtime override modes
#define REALTIME_OVERRIDE_NONE 0
#define REALTIME_OVERRIDE_ONCE 1
#define REALTIME_OVERRIDE_ALWAYS 2
//E1.31 DMX modes
#define DMX_MODE_DISABLED 0 //not used
#define DMX_MODE_SINGLE_RGB 1 //all LEDs same RGB color (3 channels)
#define DMX_MODE_SINGLE_DRGB 2 //all LEDs same RGB color and master dimmer (4 channels)
#define DMX_MODE_EFFECT 3 //trigger standalone effects of WLED (11 channels)
#define DMX_MODE_MULTIPLE_RGB 4 //every LED is addressed with its own RGB (ledCount * 3 channels)
#define DMX_MODE_MULTIPLE_DRGB 5 //every LED is addressed with its own RGB and share a master dimmer (ledCount * 3 + 1 channels)
//Light capability byte (unused)
#define TYPE_NONE 0 //light is not configured
#define TYPE_RESERVED 1 //unused. Might indicate a "virtual" light
#define TYPE_WS2812_RGB 2
#define TYPE_SK6812_RGBW 3
#define TYPE_WS2812_WWA 4 //amber + warm + cold white
#define TYPE_WS2801 5
#define TYPE_ANALOG_1CH 6 //single channel PWM. Uses value of brightest RGBW channel
#define TYPE_ANALOG_2CH 7 //analog WW + CW
#define TYPE_ANALOG_3CH 8 //analog RGB
#define TYPE_ANALOG_4CH 9 //analog RGBW
#define TYPE_ANALOG_5CH 10 //analog RGB + WW + CW
#define TYPE_APA102 11
#define TYPE_LPD8806 12
//Hue error codes
#define HUE_ERROR_INACTIVE 0
#define HUE_ERROR_UNAUTHORIZED 1
#define HUE_ERROR_LIGHTID 3
#define HUE_ERROR_PUSHLINK 101
#define HUE_ERROR_JSON_PARSING 250
#define HUE_ERROR_TIMEOUT 251
#define HUE_ERROR_ACTIVE 255
//Segment option byte bits
#define SEG_OPTION_SELECTED 0
#define SEG_OPTION_REVERSED 1
#define SEG_OPTION_ON 2
#define SEG_OPTION_TRANSITIONAL 7
//EEPROM size
#define EEPSIZE 2560 //Maximum is 4096
#define NTP_PACKET_SIZE 48
// maximum number of LEDs - MAX_LEDS is coming from the JSON response getting too big, MAX_LEDS_DMA will become a timing issue
#define MAX_LEDS 1500
#define MAX_LEDS_DMA 500
// string temp buffer (now stored in stack locally)
#define OMAX 2048
#define E131_MAX_UNIVERSE_COUNT 9
#define ABL_MILLIAMPS_DEFAULT 850; // auto lower brightness to stay close to milliampere limit
#endif